Hi Marek,

I've followed your advice and tried the following two on clean tree:

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm

Unfortunately, this does not help. I'm still getting the same error.

Best, Vasili

On Sun, May 4, 2014 at 2:12 PM, Belisko Marek marek.belisko@gmail.comwrote:

Hi Vasisli,

On Sun, May 4, 2014 at 12:56 PM, Vasili Galka vvv444@gmail.com wrote:

...

Hi,

I'm having some very basic problem with building u-boot. Using clean v2014.04 checkout, I run config:

make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config

Add to parameters also ARCH=arm

...

Which passes fine. But when I run the actual build after that I'm getting an error:

$ make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm GEN include/autoconf.mk.dep GEN include/autoconf.mk make[1]: *** No rule to make target 'am335x_evm'. Stop. Makefile:138: recipe for target 'sub-make' failed make: *** [sub-make] Error 2

What am I doing wrong?

Best regards, Vasili

---

U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

BR,

marek

-- as simple and primitive as possible

---

Marek Belisko - OPEN-NANDRA Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com

On Sun, May 4, 2014 at 2:24 PM, Belisko Marek marek.belisko@gmail.comwrote:

Hi Vasili,

please do not top post.

On Sun, May 4, 2014 at 1:18 PM, Vasili Galka vvv444@gmail.com wrote:

...

Hi Marek,

I've followed your advice and tried the following two on clean tree:

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm

Unfortunately, this does not help. I'm still getting the same error.

Try: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_evm_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

it works for me (please update your CROSS_COMPILE)

...

Best, Vasili

On Sun, May 4, 2014 at 2:12 PM, Belisko Marek marek.belisko@gmail.com wrote:

...

Hi Vasisli,

On Sun, May 4, 2014 at 12:56 PM, Vasili Galka vvv444@gmail.com wrote:

...

Hi,

I'm having some very basic problem with building u-boot. Using clean v2014.04 checkout, I run config:

make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config

Add to parameters also ARCH=arm

...

Which passes fine. But when I run the actual build after that I'm getting an error:

$ make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm GEN include/autoconf.mk.dep GEN include/autoconf.mk make[1]: *** No rule to make target 'am335x_evm'. Stop. Makefile:138: recipe for target 'sub-make' failed make: *** [sub-make] Error 2

What am I doing wrong?

Best regards, Vasili

---

U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

BR,

marek

-- as simple and primitive as possible

---

Marek Belisko - OPEN-NANDRA Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com

BR,

marek

-- as simple and primitive as possible

---

Marek Belisko - OPEN-NANDRA Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com

Dear Marek,

First, many thanks for your help! Second, please excuse me if I did something wrong, that was merely of inexperience, hope now it is fine. Third, maybe I should have described my configuration a little more on the beginning, as it is not totally standard:

I'm building on Cygwin using arm-none-eabi tool-chain that I've built myself. Up until now I was working on v2013.10 based branch and all was building fine. Today I wanted to migrate to v2014.04 bumped into the above problem. I don't fully understand why my tool-chain is not good enough for the newer branch and what I shall do now.

Looking forward for your advice.

Regards, Vasili

On Sun, May 4, 2014 at 4:12 PM, Jeroen Hofstee dasuboot@myspectrum.nlwrote:

Hello Vasili,

On zo, 2014-05-04 at 14:48 +0300, Vasili Galka wrote:

...

On Sun, May 4, 2014 at 2:24 PM, Belisko Marek <marek.belisko@gmail.com wrote:

...

...

I've followed your advice and tried the following two on clean tree:

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm

am335x_evm

...

...

...

Unfortunately, this does not help. I'm still getting the same error.

Try: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_evm_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

it works for me (please update your CROSS_COMPILE)

As Marek showed above, just use make after configure. I.o.w. remove the board name as an argument to the second make command.

Regards, Jeroen

Oh, I see. Missed this. Thank you guys!