always setup mac address register with the contents in ethaddr.

This is not in line with u-boot design principle "not to initalize not used devices", and maybe should go away, if there is a solution for passing the mac address to arm linux kernels.

Tested on the magnesium board.

Signed-off-by: Heiko Schocher hs@denx.de --- - changes since v1 posted here: http://lists.denx.de/pipermail/u-boot/2010-March/069192.html

- splitted in two patches as Wolfgang suggested

drivers/net/fec_mxc.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 98ff64b..6841208 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -752,9 +752,10 @@ static int fec_probe(bd_t *bd) if (!eth_getenv_enetaddr("ethaddr", ethaddr)) { if (fec_get_hwaddr(edev, ethaddr) == 0) { printf("got MAC address from EEPROM: %pM\n", ethaddr); - memcpy(edev->enetaddr, ethaddr, 6); } } + memcpy(edev->enetaddr, ethaddr, 6); + fec_set_hwaddr(edev);

return 0; }