From: Anselm Busse anselm.busse@outlook.com

The SPL for the Overo board does not initialise the MMC. Hence, it cannot load the main boot loader from the SD card susequently. This Patch moves the initialisation code for the MMC so it gets included in the SPL.

--- board/overo/common.c | 25 +++++++++++++++++++++++++ board/overo/overo.c | 14 -------------- 2 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/board/overo/common.c b/board/overo/common.c index fc02d66d53..851f55d43c 100644 --- a/board/overo/common.c +++ b/board/overo/common.c @@ -38,6 +38,31 @@ int board_init(void) return 0; }

+#if defined(CONFIG_MMC) +int board_mmc_init(bd_t *bis) +{ + return omap_mmc_init(0, 0, 0, -1, -1); +} +#endif + +#if defined(CONFIG_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + +#if defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + + return 0; +} +#endif /* CONFIG_SPL_OS_BOOT */ + #define MUX_OVERO() \ /*SDRC*/\ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ diff --git a/board/overo/overo.c b/board/overo/overo.c index 8fa41f8155..3d57f945f4 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -376,20 +376,6 @@ int board_eth_init(bd_t *bis) } #endif

-#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} -#endif - -#if defined(CONFIG_MMC) -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif - #if defined(CONFIG_USB_EHCI_HCD) static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,