[UBOOT PATCH v4] test/py: net: Add dhcp abort test
Abort the dhcp request in the middle by pressing ctrl + c on u-boot prompt and validate the abort status.
Signed-off-by: Love Kumar love.kumar@amd.com --- Changes in v2: - Mark CMD_MII command dependency
Changes in v3: - Skip the test if PHY device not present
Changes in v4: - Setup the network configuration by running dhcp test at the end of test - Add option to skip the test if it is not desired or possible --- test/py/tests/test_net.py | 57 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
diff --git a/test/py/tests/test_net.py b/test/py/tests/test_net.py index b2241ae6a482..e0749125fd53 100644 --- a/test/py/tests/test_net.py +++ b/test/py/tests/test_net.py @@ -7,6 +7,7 @@ import pytest import u_boot_utils import uuid +import re
""" Note: This test relies on boardenv_* containing configuration values to define @@ -30,6 +31,11 @@ env__net_uses_pci = True # set to False. env__net_dhcp_server = True
+# False or omitted if a DHCP server is attached to the network, and dhcp abort +# case should be tested. +# If DHCP abort testing is not possible or desired, set this variable to True. +env__dhcp_abort_test_skip = True + # True if a DHCPv6 server is attached to the network, and should be tested. # If DHCPv6 testing is not possible or desired, this variable may be omitted or # set to False. @@ -115,6 +121,57 @@ def test_net_dhcp(u_boot_console): global net_set_up net_set_up = True
+@pytest.mark.buildconfigspec("cmd_dhcp") +@pytest.mark.buildconfigspec("cmd_mii") +def test_net_dhcp_abort(u_boot_console): + """Test the dhcp command by pressing ctrl+c in the middle of dhcp request + + The boardenv_* file may be used to enable/disable this test; see the + comment at the beginning of this file. + """ + + test_dhcp = u_boot_console.config.env.get("env__net_dhcp_server", False) + if not test_dhcp: + pytest.skip("No DHCP server available") + + if u_boot_console.config.env.get("env__dhcp_abort_test_skip", False): + pytest.skip("DHCP abort test is not enabled!") + + u_boot_console.run_command("setenv autoload no") + + # Phy reset before running dhcp command + output = u_boot_console.run_command("mii device") + if not re.search(r"Current device: '(.+?)'", output): + pytest.skip("PHY device does not exist!") + eth_num = re.search(r"Current device: '(.+?)'", output).groups()[0] + u_boot_console.run_command(f"mii device {eth_num}") + output = u_boot_console.run_command("mii info") + eth_addr = hex(int(re.search(r"PHY (.+?):", output).groups()[0], 16)) + u_boot_console.run_command(f"mii modify {eth_addr} 0 0x8000 0x8000") + + u_boot_console.run_command("dhcp", wait_for_prompt=False) + try: + u_boot_console.wait_for("Waiting for PHY auto negotiation to complete") + except: + pytest.skip("Timeout waiting for PHY auto negotiation to complete") + + u_boot_console.wait_for("done") + + # Sending Ctrl-C + output = u_boot_console.run_command( + chr(3), wait_for_echo=False, send_nl=False + ) + + assert "TIMEOUT" not in output + assert "DHCP client bound to address " not in output + assert "Abort" in output + + # Provide a time to recover from Abort - if it is not performed + # There is message like: ethernet@ff0e0000: No link. + u_boot_console.run_command("sleep 1") + # Run the dhcp test to setup the network configuration + test_net_dhcp(u_boot_console) + @pytest.mark.buildconfigspec('cmd_dhcp6') def test_net_dhcp6(u_boot_console): """Test the dhcp6 command.
On Tue, Nov 21, 2023 at 06:32:47PM +0530, Love Kumar wrote:
Abort the dhcp request in the middle by pressing ctrl + c on u-boot prompt and validate the abort status.
Signed-off-by: Love Kumar love.kumar@amd.com
Reviewed-by: Tom Rini trini@konsulko.com
On Tue, Nov 21, 2023 at 06:32:47PM +0530, Love Kumar wrote:
Abort the dhcp request in the middle by pressing ctrl + c on u-boot prompt and validate the abort status.
Signed-off-by: Love Kumar love.kumar@amd.com Reviewed-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
Hi,
On 21/11/2023 14:02, Love Kumar wrote:
Abort the dhcp request in the middle by pressing ctrl + c on u-boot prompt and validate the abort status.
Signed-off-by: Love Kumar love.kumar@amd.com
Changes in v2:
- Mark CMD_MII command dependency
Changes in v3:
- Skip the test if PHY device not present
Changes in v4:
- Setup the network configuration by running dhcp test at the end of
test
- Add option to skip the test if it is not desired or possible
test/py/tests/test_net.py | 57 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
diff --git a/test/py/tests/test_net.py b/test/py/tests/test_net.py index b2241ae6a482..e0749125fd53 100644 --- a/test/py/tests/test_net.py +++ b/test/py/tests/test_net.py @@ -7,6 +7,7 @@ import pytest import u_boot_utils import uuid +import re
""" Note: This test relies on boardenv_* containing configuration values to define @@ -30,6 +31,11 @@ env__net_uses_pci = True # set to False. env__net_dhcp_server = True
+# False or omitted if a DHCP server is attached to the network, and dhcp abort +# case should be tested. +# If DHCP abort testing is not possible or desired, set this variable to True. +env__dhcp_abort_test_skip = True
- # True if a DHCPv6 server is attached to the network, and should be tested. # If DHCPv6 testing is not possible or desired, this variable may be omitted or # set to False.
@@ -115,6 +121,57 @@ def test_net_dhcp(u_boot_console): global net_set_up net_set_up = True
+@pytest.mark.buildconfigspec("cmd_dhcp") +@pytest.mark.buildconfigspec("cmd_mii") +def test_net_dhcp_abort(u_boot_console):
- """Test the dhcp command by pressing ctrl+c in the middle of dhcp request
- The boardenv_* file may be used to enable/disable this test; see the
- comment at the beginning of this file.
- """
- test_dhcp = u_boot_console.config.env.get("env__net_dhcp_server", False)
- if not test_dhcp:
pytest.skip("No DHCP server available")- if u_boot_console.config.env.get("env__dhcp_abort_test_skip", False):
pytest.skip("DHCP abort test is not enabled!")- u_boot_console.run_command("setenv autoload no")
- # Phy reset before running dhcp command
- output = u_boot_console.run_command("mii device")
- if not re.search(r"Current device: '(.+?)'", output):
pytest.skip("PHY device does not exist!")- eth_num = re.search(r"Current device: '(.+?)'", output).groups()[0]
- u_boot_console.run_command(f"mii device {eth_num}")
- output = u_boot_console.run_command("mii info")
- eth_addr = hex(int(re.search(r"PHY (.+?):", output).groups()[0], 16))
- u_boot_console.run_command(f"mii modify {eth_addr} 0 0x8000 0x8000")
- u_boot_console.run_command("dhcp", wait_for_prompt=False)
- try:
u_boot_console.wait_for("Waiting for PHY auto negotiation to complete")- except:
pytest.skip("Timeout waiting for PHY auto negotiation to complete")- u_boot_console.wait_for("done")
- # Sending Ctrl-C
- output = u_boot_console.run_command(
chr(3), wait_for_echo=False, send_nl=False- )
- assert "TIMEOUT" not in output
- assert "DHCP client bound to address " not in output
- assert "Abort" in output
- # Provide a time to recover from Abort - if it is not performed
- # There is message like: ethernet@ff0e0000: No link.
- u_boot_console.run_command("sleep 1")
- # Run the dhcp test to setup the network configuration
- test_net_dhcp(u_boot_console)
- @pytest.mark.buildconfigspec('cmd_dhcp6') def test_net_dhcp6(u_boot_console): """Test the dhcp6 command.
This test fails on the BPI-M2S and BPI-M5 boards:
Section: test_net_dhcp_abort TIME: NOW: 2024/01/18 08:43:48.152149 TIME: SINCE-PREV: 0:00:00.000629 TIME: SINCE-START: 0:02:17.928462 Stream: console => setenv autoload no => End stream: console TIME: NOW: 2024/01/18 08:43:48.232597 TIME: SINCE-PREV: 0:00:00.080448 TIME: SINCE-START: 0:02:18.008910 Stream: console => mii device MII devices: 'mdio' 'mdio@0' Current device: 'mdio' => End stream: console TIME: NOW: 2024/01/18 08:43:48.277449 TIME: SINCE-PREV: 0:00:00.044852 TIME: SINCE-START: 0:02:18.053762 Stream: console => mii device mdio => End stream: console TIME: NOW: 2024/01/18 08:43:48.318273 TIME: SINCE-PREV: 0:00:00.040824 TIME: SINCE-START: 0:02:18.094586 Stream: console => mii info PHY 0x00: OUI = 0x0732, Model = 0x11, Rev = 0x06, 100baseT, FDX PHY 0x01: OUI = 0x0732, Model = 0x11, Rev = 0x06, 100baseT, FDX => End stream: console TIME: NOW: 2024/01/18 08:43:48.370420 TIME: SINCE-PREV: 0:00:00.052147 TIME: SINCE-START: 0:02:18.146733 Stream: console => mii modify 0x0 0 0x8000 0x8000 => End stream: console TIME: NOW: 2024/01/18 08:43:48.451550 TIME: SINCE-PREV: 0:00:00.081130 TIME: SINCE-START: 0:02:18.227863 Stream: console => dhcp End stream: console TIME: NOW: 2024/01/18 08:43:48.493680 TIME: SINCE-PREV: 0:00:00.042130 TIME: SINCE-START: 0:02:18.269993 Stream: console ethernet@ff3f0000 Waiting for PHY auto negotiation to complete..... done Speed: 100, full duplex BOOTP broadcast 1 DHCP client bound to address 10.34.56.144 (3 ms) => End stream: console TIME: NOW: 2024/01/18 08:43:51.002287 TIME: SINCE-PREV: 0:00:02.508607 TIME: SINCE-START: 0:02:20.778600 Stream: console => End stream: console FAILED: test/py/tests/test_net.py:171: in test_net_dhcp_abort assert "DHCP client bound to address " not in output E AssertionError: assert 'DHCP client... to address ' not in 'Speed: 100,...6.144 (3 ms)' E 'DHCP client bound to address ' is contained here: E dcast 1 E E DHCP client bound to address 10.34.56.144 (3 ms) TIME: SINCE-SECTION: 0:00:03.866916 End section: test_net_dhcp_abort
Full test logs: Job https://gitlab.com/amlogic-foss/amlogic-u-boot-autotest/-/jobs/5956146503 : https://amlogic-foss.gitlab.io/-/amlogic-u-boot-autotest/-/jobs/5956146503/a... Job https://gitlab.com/amlogic-foss/amlogic-u-boot-autotest/-/jobs/5956097398 : https://amlogic-foss.gitlab.io/-/amlogic-u-boot-autotest/-/jobs/5956097398/a...
It seems it makes DHCP fail on subsequent board reboots.
Neil
On Thu, Jan 18, 2024 at 09:56:58AM +0100, neil.armstrong@linaro.org wrote:
Hi,
On 21/11/2023 14:02, Love Kumar wrote:
Abort the dhcp request in the middle by pressing ctrl + c on u-boot prompt and validate the abort status.
Signed-off-by: Love Kumar love.kumar@amd.com
Changes in v2:
- Mark CMD_MII command dependency
Changes in v3:
- Skip the test if PHY device not present
Changes in v4:
- Setup the network configuration by running dhcp test at the end of
test
- Add option to skip the test if it is not desired or possible
test/py/tests/test_net.py | 57 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
diff --git a/test/py/tests/test_net.py b/test/py/tests/test_net.py index b2241ae6a482..e0749125fd53 100644 --- a/test/py/tests/test_net.py +++ b/test/py/tests/test_net.py @@ -7,6 +7,7 @@ import pytest import u_boot_utils import uuid +import re """ Note: This test relies on boardenv_* containing configuration values to define @@ -30,6 +31,11 @@ env__net_uses_pci = True # set to False. env__net_dhcp_server = True +# False or omitted if a DHCP server is attached to the network, and dhcp abort +# case should be tested. +# If DHCP abort testing is not possible or desired, set this variable to True. +env__dhcp_abort_test_skip = True
- # True if a DHCPv6 server is attached to the network, and should be tested. # If DHCPv6 testing is not possible or desired, this variable may be omitted or # set to False.
@@ -115,6 +121,57 @@ def test_net_dhcp(u_boot_console): global net_set_up net_set_up = True +@pytest.mark.buildconfigspec("cmd_dhcp") +@pytest.mark.buildconfigspec("cmd_mii") +def test_net_dhcp_abort(u_boot_console):
- """Test the dhcp command by pressing ctrl+c in the middle of dhcp request
- The boardenv_* file may be used to enable/disable this test; see the
- comment at the beginning of this file.
- """
- test_dhcp = u_boot_console.config.env.get("env__net_dhcp_server", False)
- if not test_dhcp:
pytest.skip("No DHCP server available")- if u_boot_console.config.env.get("env__dhcp_abort_test_skip", False):
pytest.skip("DHCP abort test is not enabled!")- u_boot_console.run_command("setenv autoload no")
- # Phy reset before running dhcp command
- output = u_boot_console.run_command("mii device")
- if not re.search(r"Current device: '(.+?)'", output):
pytest.skip("PHY device does not exist!")- eth_num = re.search(r"Current device: '(.+?)'", output).groups()[0]
- u_boot_console.run_command(f"mii device {eth_num}")
- output = u_boot_console.run_command("mii info")
- eth_addr = hex(int(re.search(r"PHY (.+?):", output).groups()[0], 16))
- u_boot_console.run_command(f"mii modify {eth_addr} 0 0x8000 0x8000")
- u_boot_console.run_command("dhcp", wait_for_prompt=False)
- try:
u_boot_console.wait_for("Waiting for PHY auto negotiation to complete")- except:
pytest.skip("Timeout waiting for PHY auto negotiation to complete")- u_boot_console.wait_for("done")
- # Sending Ctrl-C
- output = u_boot_console.run_command(
chr(3), wait_for_echo=False, send_nl=False- )
- assert "TIMEOUT" not in output
- assert "DHCP client bound to address " not in output
- assert "Abort" in output
- # Provide a time to recover from Abort - if it is not performed
- # There is message like: ethernet@ff0e0000: No link.
- u_boot_console.run_command("sleep 1")
- # Run the dhcp test to setup the network configuration
- test_net_dhcp(u_boot_console)
- @pytest.mark.buildconfigspec('cmd_dhcp6') def test_net_dhcp6(u_boot_console): """Test the dhcp6 command.
This test fails on the BPI-M2S and BPI-M5 boards:
Section: test_net_dhcp_abort TIME: NOW: 2024/01/18 08:43:48.152149 TIME: SINCE-PREV: 0:00:00.000629 TIME: SINCE-START: 0:02:17.928462 Stream: console => setenv autoload no => End stream: console TIME: NOW: 2024/01/18 08:43:48.232597 TIME: SINCE-PREV: 0:00:00.080448 TIME: SINCE-START: 0:02:18.008910 Stream: console => mii device MII devices: 'mdio' 'mdio@0' Current device: 'mdio' => End stream: console TIME: NOW: 2024/01/18 08:43:48.277449 TIME: SINCE-PREV: 0:00:00.044852 TIME: SINCE-START: 0:02:18.053762 Stream: console => mii device mdio => End stream: console TIME: NOW: 2024/01/18 08:43:48.318273 TIME: SINCE-PREV: 0:00:00.040824 TIME: SINCE-START: 0:02:18.094586 Stream: console => mii info PHY 0x00: OUI = 0x0732, Model = 0x11, Rev = 0x06, 100baseT, FDX PHY 0x01: OUI = 0x0732, Model = 0x11, Rev = 0x06, 100baseT, FDX => End stream: console TIME: NOW: 2024/01/18 08:43:48.370420 TIME: SINCE-PREV: 0:00:00.052147 TIME: SINCE-START: 0:02:18.146733 Stream: console => mii modify 0x0 0 0x8000 0x8000 => End stream: console TIME: NOW: 2024/01/18 08:43:48.451550 TIME: SINCE-PREV: 0:00:00.081130 TIME: SINCE-START: 0:02:18.227863 Stream: console => dhcp End stream: console TIME: NOW: 2024/01/18 08:43:48.493680 TIME: SINCE-PREV: 0:00:00.042130 TIME: SINCE-START: 0:02:18.269993 Stream: console ethernet@ff3f0000 Waiting for PHY auto negotiation to complete..... done Speed: 100, full duplex BOOTP broadcast 1 DHCP client bound to address 10.34.56.144 (3 ms) => End stream: console TIME: NOW: 2024/01/18 08:43:51.002287 TIME: SINCE-PREV: 0:00:02.508607 TIME: SINCE-START: 0:02:20.778600 Stream: console => End stream: console FAILED: test/py/tests/test_net.py:171: in test_net_dhcp_abort assert "DHCP client bound to address " not in output E AssertionError: assert 'DHCP client... to address ' not in 'Speed: 100,...6.144 (3 ms)' E 'DHCP client bound to address ' is contained here: E dcast 1 E E DHCP client bound to address 10.34.56.144 (3 ms) TIME: SINCE-SECTION: 0:00:03.866916 End section: test_net_dhcp_abort
Full test logs: Job https://gitlab.com/amlogic-foss/amlogic-u-boot-autotest/-/jobs/5956146503 : https://amlogic-foss.gitlab.io/-/amlogic-u-boot-autotest/-/jobs/5956146503/a... Job https://gitlab.com/amlogic-foss/amlogic-u-boot-autotest/-/jobs/5956097398 : https://amlogic-foss.gitlab.io/-/amlogic-u-boot-autotest/-/jobs/5956097398/a...
It seems it makes DHCP fail on subsequent board reboots.
We need to rework this test to be opt-in rather than opt-out, I'll revert for now.
On 1/18/24 15:06, Tom Rini wrote:
On Thu, Jan 18, 2024 at 09:56:58AM +0100, neil.armstrong@linaro.org wrote:
Hi,
On 21/11/2023 14:02, Love Kumar wrote:
Abort the dhcp request in the middle by pressing ctrl + c on u-boot prompt and validate the abort status.
Signed-off-by: Love Kumar love.kumar@amd.com
Changes in v2:
- Mark CMD_MII command dependency
Changes in v3:
- Skip the test if PHY device not present
Changes in v4:
- Setup the network configuration by running dhcp test at the end of
test
- Add option to skip the test if it is not desired or possible
test/py/tests/test_net.py | 57 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
diff --git a/test/py/tests/test_net.py b/test/py/tests/test_net.py index b2241ae6a482..e0749125fd53 100644 --- a/test/py/tests/test_net.py +++ b/test/py/tests/test_net.py @@ -7,6 +7,7 @@ import pytest import u_boot_utils import uuid +import re """ Note: This test relies on boardenv_* containing configuration values to define @@ -30,6 +31,11 @@ env__net_uses_pci = True # set to False. env__net_dhcp_server = True +# False or omitted if a DHCP server is attached to the network, and dhcp abort +# case should be tested. +# If DHCP abort testing is not possible or desired, set this variable to True. +env__dhcp_abort_test_skip = True
- # True if a DHCPv6 server is attached to the network, and should be tested. # If DHCPv6 testing is not possible or desired, this variable may be omitted or # set to False.
@@ -115,6 +121,57 @@ def test_net_dhcp(u_boot_console): global net_set_up net_set_up = True +@pytest.mark.buildconfigspec("cmd_dhcp") +@pytest.mark.buildconfigspec("cmd_mii") +def test_net_dhcp_abort(u_boot_console):
- """Test the dhcp command by pressing ctrl+c in the middle of dhcp request
- The boardenv_* file may be used to enable/disable this test; see the
- comment at the beginning of this file.
- """
- test_dhcp = u_boot_console.config.env.get("env__net_dhcp_server", False)
- if not test_dhcp:
pytest.skip("No DHCP server available")- if u_boot_console.config.env.get("env__dhcp_abort_test_skip", False):
pytest.skip("DHCP abort test is not enabled!")- u_boot_console.run_command("setenv autoload no")
- # Phy reset before running dhcp command
- output = u_boot_console.run_command("mii device")
- if not re.search(r"Current device: '(.+?)'", output):
pytest.skip("PHY device does not exist!")- eth_num = re.search(r"Current device: '(.+?)'", output).groups()[0]
- u_boot_console.run_command(f"mii device {eth_num}")
- output = u_boot_console.run_command("mii info")
- eth_addr = hex(int(re.search(r"PHY (.+?):", output).groups()[0], 16))
- u_boot_console.run_command(f"mii modify {eth_addr} 0 0x8000 0x8000")
- u_boot_console.run_command("dhcp", wait_for_prompt=False)
- try:
u_boot_console.wait_for("Waiting for PHY auto negotiation to complete")- except:
pytest.skip("Timeout waiting for PHY auto negotiation to complete")- u_boot_console.wait_for("done")
- # Sending Ctrl-C
- output = u_boot_console.run_command(
chr(3), wait_for_echo=False, send_nl=False- )
- assert "TIMEOUT" not in output
- assert "DHCP client bound to address " not in output
- assert "Abort" in output
- # Provide a time to recover from Abort - if it is not performed
- # There is message like: ethernet@ff0e0000: No link.
- u_boot_console.run_command("sleep 1")
- # Run the dhcp test to setup the network configuration
- test_net_dhcp(u_boot_console)
- @pytest.mark.buildconfigspec('cmd_dhcp6') def test_net_dhcp6(u_boot_console): """Test the dhcp6 command.
This test fails on the BPI-M2S and BPI-M5 boards:
Section: test_net_dhcp_abort TIME: NOW: 2024/01/18 08:43:48.152149 TIME: SINCE-PREV: 0:00:00.000629 TIME: SINCE-START: 0:02:17.928462 Stream: console => setenv autoload no => End stream: console TIME: NOW: 2024/01/18 08:43:48.232597 TIME: SINCE-PREV: 0:00:00.080448 TIME: SINCE-START: 0:02:18.008910 Stream: console => mii device MII devices: 'mdio' 'mdio@0' Current device: 'mdio' => End stream: console TIME: NOW: 2024/01/18 08:43:48.277449 TIME: SINCE-PREV: 0:00:00.044852 TIME: SINCE-START: 0:02:18.053762 Stream: console => mii device mdio => End stream: console TIME: NOW: 2024/01/18 08:43:48.318273 TIME: SINCE-PREV: 0:00:00.040824 TIME: SINCE-START: 0:02:18.094586 Stream: console => mii info PHY 0x00: OUI = 0x0732, Model = 0x11, Rev = 0x06, 100baseT, FDX PHY 0x01: OUI = 0x0732, Model = 0x11, Rev = 0x06, 100baseT, FDX => End stream: console TIME: NOW: 2024/01/18 08:43:48.370420 TIME: SINCE-PREV: 0:00:00.052147 TIME: SINCE-START: 0:02:18.146733 Stream: console => mii modify 0x0 0 0x8000 0x8000 => End stream: console TIME: NOW: 2024/01/18 08:43:48.451550 TIME: SINCE-PREV: 0:00:00.081130 TIME: SINCE-START: 0:02:18.227863 Stream: console => dhcp End stream: console TIME: NOW: 2024/01/18 08:43:48.493680 TIME: SINCE-PREV: 0:00:00.042130 TIME: SINCE-START: 0:02:18.269993 Stream: console ethernet@ff3f0000 Waiting for PHY auto negotiation to complete..... done Speed: 100, full duplex BOOTP broadcast 1 DHCP client bound to address 10.34.56.144 (3 ms) => End stream: console TIME: NOW: 2024/01/18 08:43:51.002287 TIME: SINCE-PREV: 0:00:02.508607 TIME: SINCE-START: 0:02:20.778600 Stream: console => End stream: console FAILED: test/py/tests/test_net.py:171: in test_net_dhcp_abort assert "DHCP client bound to address " not in output E AssertionError: assert 'DHCP client... to address ' not in 'Speed: 100,...6.144 (3 ms)' E 'DHCP client bound to address ' is contained here: E dcast 1 E E DHCP client bound to address 10.34.56.144 (3 ms) TIME: SINCE-SECTION: 0:00:03.866916 End section: test_net_dhcp_abort
Full test logs: Job https://gitlab.com/amlogic-foss/amlogic-u-boot-autotest/-/jobs/5956146503 : https://amlogic-foss.gitlab.io/-/amlogic-u-boot-autotest/-/jobs/5956146503/a... Job https://gitlab.com/amlogic-foss/amlogic-u-boot-autotest/-/jobs/5956097398 : https://amlogic-foss.gitlab.io/-/amlogic-u-boot-autotest/-/jobs/5956097398/a...
It seems it makes DHCP fail on subsequent board reboots.
We need to rework this test to be opt-in rather than opt-out, I'll revert for now.
yes. It should be disabled by default for sure. I told to Love to designed all new tests like that.
Thanks, Michal
participants (4)
-
Love Kumar -
Michal Simek -
neil.armstrong＠linaro.org -
Tom Rini