Dear Rob Herring,

In message 1378670088-17602-1-git-send-email-robherring2@gmail.com you wrote:

...

diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index e59ee96..4c25289 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -53,4 +53,8 @@ #define HAVE_BLOCK_DEVICE #endif

+#ifndef CONFIG_SYS_HZ +#define CONFIG_SYS_HZ 1000 +#endif

This should be not a fallback (i. e. default value) which can be silently overwritten - this should be a mandatory definition that causes build errors if somebody tries to define a different value.

Best regards,

Wolfgang Denk

From: Rob Herring rob.herring@calxeda.com

According to the README, CONFIG_SYS_HZ must be 1000 and most platforms follow that. Remove CONFIG_SYS_HZ from all these platforms and provide a common definition. The platforms which use a value other than 1000 are untouched and will get build errors. These configs are:

include/configs/M5271EVB.h:#define CONFIG_SYS_HZ 1000000 include/configs/balloon3.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ include/configs/idmr.h:#define CONFIG_SYS_HZ (50000000 / 64) include/configs/mini2440.h:#define CONFIG_SYS_HZ 1562500 include/configs/mx1ads.h:#define CONFIG_SYS_HZ 3686400 include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) include/configs/omap730p2.h:#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) include/configs/palmld.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ include/configs/palmtc.h:#define CONFIG_SYS_HZ 3686400 /* Timer @ 3686400 Hz */ include/configs/rsk7203.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7264.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7269.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/scb9328.h:#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ include/configs/versatile.h:#define CONFIG_SYS_HZ (1000000 / 256) include/configs/zipitz2.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */

Signed-off-by: Rob Herring rob.herring@calxeda.com --- v2: - Add warning for boards defining CONFIG_SYS_HZ. Boards using value other than 1000 will now generate warnings. - Change KAREF, METROBOX, and MVBLUE to use 1000. Appeared to be a typo. - Convert a few more boards to remove CONFIG_SYS_HZ that were missed in v1.

arch/arm/include/asm/arch-lpc32xx/config.h | 3 --- arch/blackfin/include/asm/config.h | 7 ------- include/config_fallbacks.h | 5 +++++ include/configs/A3000.h | 1 - include/configs/APC405.h | 2 -- include/configs/AR405.h | 2 -- include/configs/ASH405.h | 2 -- include/configs/Adder.h | 2 -- include/configs/B4860QDS.h | 1 - include/configs/BC3450.h | 2 -- include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/CATcenter.h | 2 -- include/configs/CMS700.h | 2 -- include/configs/CPC45.h | 1 - include/configs/CPCI2DP.h | 2 -- include/configs/CPCI405.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/CPCI405AB.h | 2 -- include/configs/CPCI405DT.h | 2 -- include/configs/CPCI750.h | 1 - include/configs/CPCIISER4.h | 2 -- include/configs/CPU86.h | 2 -- include/configs/CPU87.h | 2 -- include/configs/CRAYL1.h | 1 - include/configs/CU824.h | 1 - include/configs/DB64360.h | 1 - include/configs/DB64460.h | 1 - include/configs/DP405.h | 2 -- include/configs/DU405.h | 2 -- include/configs/DU440.h | 2 -- include/configs/ELPPC.h | 2 -- include/configs/ELPT860.h | 2 -- include/configs/EP88x.h | 2 -- include/configs/ESTEEM192E.h | 2 -- include/configs/EVB64260.h | 2 -- include/configs/EXBITGEN.h | 2 -- include/configs/FADS823.h | 2 -- include/configs/FADS850SAR.h | 2 -- include/configs/FLAGADM.h | 2 -- include/configs/FPS850L.h | 2 -- include/configs/FPS860L.h | 2 -- include/configs/G2000.h | 2 -- include/configs/GEN860T.h | 5 ----- include/configs/GENIETV.h | 2 -- include/configs/HH405.h | 2 -- include/configs/HIDDEN_DRAGON.h | 1 - include/configs/HUB405.h | 2 -- include/configs/HWW1U1A.h | 2 -- include/configs/ICU862.h | 2 -- include/configs/IDS8247.h | 2 -- include/configs/IP860.h | 2 -- include/configs/IPHASE4539.h | 2 -- include/configs/ISPAN.h | 2 -- include/configs/IVML24.h | 2 -- include/configs/IVMS8.h | 2 -- include/configs/IceCube.h | 2 -- include/configs/JSE.h | 2 -- include/configs/KAREF.h | 3 --- include/configs/KUP4K.h | 2 -- include/configs/KUP4X.h | 2 -- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 2 -- include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 2 -- include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 2 -- include/configs/M54451EVB.h | 2 -- include/configs/M54455EVB.h | 2 -- include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MBX.h | 2 -- include/configs/MBX860T.h | 2 -- include/configs/MERGERBOX.h | 1 - include/configs/METROBOX.h | 3 --- include/configs/MHPC.h | 2 -- include/configs/MIP405.h | 2 -- include/configs/MOUSSE.h | 1 - include/configs/MPC8260ADS.h | 2 -- include/configs/MPC8266ADS.h | 2 -- include/configs/MPC8308RDB.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MUSENKI.h | 1 - include/configs/MVBC_P.h | 2 -- include/configs/MVBLM7.h | 1 - include/configs/MVBLUE.h | 1 - include/configs/MVS1.h | 2 -- include/configs/MVSMR.h | 2 -- include/configs/MigoR.h | 1 - include/configs/NETPHONE.h | 2 -- include/configs/NETTA.h | 2 -- include/configs/NETTA2.h | 2 -- include/configs/NETVIA.h | 2 -- include/configs/NSCU.h | 2 -- include/configs/NX823.h | 2 -- include/configs/OCRTC.h | 2 -- include/configs/ORSG.h | 2 -- include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/P1023RDB.h | 1 - include/configs/P1023RDS.h | 1 - include/configs/P1_P2_RDB.h | 1 - include/configs/P2020COME.h | 1 - include/configs/P2020DS.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/P3G4.h | 2 -- include/configs/PATI.h | 2 -- include/configs/PCI405.h | 2 -- include/configs/PCI5441.h | 1 - include/configs/PIP405.h | 2 -- include/configs/PK1C20.h | 1 - include/configs/PLU405.h | 2 -- include/configs/PM520.h | 2 -- include/configs/PM826.h | 2 -- include/configs/PM828.h | 2 -- include/configs/PMC405.h | 2 -- include/configs/PMC405DE.h | 2 -- include/configs/PMC440.h | 2 -- include/configs/PN62.h | 1 - include/configs/PPChameleonEVB.h | 2 -- include/configs/QS823.h | 2 -- include/configs/QS850.h | 2 -- include/configs/QS860T.h | 2 -- include/configs/R360MPI.h | 2 -- include/configs/RBC823.h | 2 -- include/configs/RPXClassic.h | 2 -- include/configs/RPXlite.h | 2 -- include/configs/RPXlite_DW.h | 2 -- include/configs/RPXsuper.h | 1 - include/configs/RRvision.h | 2 -- include/configs/Rattler.h | 2 -- include/configs/SIMPC8313.h | 1 - include/configs/SM850.h | 2 -- include/configs/SPD823TS.h | 2 -- include/configs/SXNI855T.h | 2 -- include/configs/Sandpoint8240.h | 1 - include/configs/Sandpoint8245.h | 1 - include/configs/TASREG.h | 2 -- include/configs/TB5200.h | 2 -- include/configs/TK885D.h | 2 -- include/configs/TOP5200.h | 2 -- include/configs/TOP860.h | 1 - include/configs/TQM5200.h | 2 -- include/configs/TQM823L.h | 2 -- include/configs/TQM823M.h | 2 -- include/configs/TQM8260.h | 2 -- include/configs/TQM8272.h | 2 -- include/configs/TQM834x.h | 1 - include/configs/TQM850L.h | 2 -- include/configs/TQM850M.h | 2 -- include/configs/TQM855L.h | 2 -- include/configs/TQM855M.h | 2 -- include/configs/TQM860L.h | 2 -- include/configs/TQM860M.h | 2 -- include/configs/TQM862L.h | 2 -- include/configs/TQM862M.h | 2 -- include/configs/TQM866M.h | 2 -- include/configs/TQM885D.h | 2 -- include/configs/Total5200.h | 2 -- include/configs/VCMA9.h | 1 - include/configs/VOH405.h | 2 -- include/configs/VOM405.h | 2 -- include/configs/VoVPN-GW.h | 1 - include/configs/W7OLMC.h | 2 -- include/configs/W7OLMG.h | 2 -- include/configs/WUH405.h | 2 -- include/configs/ZPC1900.h | 2 -- include/configs/ZUMA.h | 2 -- include/configs/a320evb.h | 1 - include/configs/a3m071.h | 1 - include/configs/a4m072.h | 2 -- include/configs/ac14xx.h | 3 --- include/configs/actux1.h | 1 - include/configs/actux2.h | 1 - include/configs/actux3.h | 1 - include/configs/actux4.h | 1 - include/configs/adp-ag101.h | 6 ------ include/configs/adp-ag101p.h | 6 ------ include/configs/adp-ag102.h | 6 ------ include/configs/aev.h | 2 -- include/configs/afeb9260.h | 1 - include/configs/alpr.h | 2 -- include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/am43xx_evm.h | 1 - include/configs/amcc-common.h | 2 -- include/configs/ap325rxa.h | 1 - include/configs/ap_sh4a_4a.h | 1 - include/configs/aria.h | 2 -- include/configs/armadillo-800eva.h | 1 - include/configs/arndale.h | 2 -- include/configs/astro_mcf5373l.h | 2 -- include/configs/at91rm9200ek.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/atc.h | 2 -- include/configs/atngw100.h | 2 -- include/configs/atngw100mkii.h | 6 ------ include/configs/atstk1002.h | 6 ------ include/configs/atstk1003.h | 6 ------ include/configs/atstk1004.h | 6 ------ include/configs/atstk1006.h | 5 ----- include/configs/calimain.h | 1 - include/configs/cam_enc_4xx.h | 1 - include/configs/canmb.h | 2 -- include/configs/cgtqmx6eval.h | 1 - include/configs/cm4008.h | 2 -- include/configs/cm41xx.h | 2 -- include/configs/cm5200.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cmi_mpc5xx.h | 2 -- include/configs/cobra5272.h | 2 -- include/configs/cogent_mpc8260.h | 2 -- include/configs/cogent_mpc8xx.h | 2 -- include/configs/colibri_pxa270.h | 1 - include/configs/controlcenterd.h | 1 - include/configs/coreboot.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cpci5200.h | 2 -- include/configs/cpu9260.h | 1 - include/configs/cpuat91.h | 1 - include/configs/csb272.h | 2 -- include/configs/csb472.h | 1 - include/configs/da830evm.h | 1 - include/configs/da850evm.h | 1 - include/configs/davinci_dm355evm.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/davinci_dm365evm.h | 1 - include/configs/davinci_dm6467evm.h | 1 - include/configs/davinci_dvevm.h | 1 - include/configs/davinci_schmoogie.h | 1 - include/configs/davinci_sffsdr.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/dbau1x00.h | 2 -- include/configs/debris.h | 1 - include/configs/devkit8000.h | 1 - include/configs/dig297.h | 1 - include/configs/digsy_mtc.h | 2 -- include/configs/dvlhost.h | 1 - include/configs/eXalion.h | 1 - include/configs/ea20.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/eb_cpux9k2.h | 1 - include/configs/ecovec.h | 1 - include/configs/edminiv2.h | 2 -- include/configs/enbw_cmc.h | 1 - include/configs/ep8248.h | 2 -- include/configs/ep8260.h | 2 -- include/configs/ep82xxm.h | 2 -- include/configs/espt.h | 1 - include/configs/ethernut5.h | 1 - include/configs/exynos5250-dt.h | 2 -- include/configs/favr-32-ezkit.h | 6 ------ include/configs/flea3.h | 2 -- include/configs/galaxy5200.h | 1 - include/configs/gr_cpci_ax2000.h | 2 -- include/configs/gr_ep2s60.h | 2 -- include/configs/gr_xc3s_1500.h | 2 -- include/configs/grasshopper.h | 6 ------ include/configs/grsim.h | 2 -- include/configs/grsim_leon2.h | 2 -- include/configs/gw8260.h | 1 - include/configs/h2200.h | 2 -- include/configs/hammerhead.h | 2 -- include/configs/hawkboard.h | 1 - include/configs/hermes.h | 2 -- include/configs/highbank.h | 2 -- include/configs/hmi1001.h | 2 -- include/configs/hymod.h | 2 -- include/configs/igep0033.h | 1 - include/configs/igep00x0.h | 1 - include/configs/ima3-mx53.h | 1 - include/configs/imx27lite-common.h | 1 - include/configs/imx31_litekit.h | 2 -- include/configs/imx31_phycore.h | 2 -- include/configs/incaip.h | 2 -- include/configs/inka4x0.h | 2 -- include/configs/integrator-common.h | 1 - include/configs/ipam390.h | 1 - include/configs/ipek01.h | 1 - include/configs/jadecpu.h | 1 - include/configs/jornada.h | 1 - include/configs/jupiter.h | 2 -- include/configs/km/keymile-common.h | 2 -- include/configs/korat.h | 2 -- include/configs/kvme080.h | 1 - include/configs/kzm9g.h | 2 -- include/configs/linkstation.h | 1 - include/configs/lp8x4x.h | 5 ----- include/configs/lubbock.h | 1 - include/configs/lwmon.h | 2 -- include/configs/lwmon5.h | 2 -- include/configs/m53evk.h | 1 - include/configs/manroland/mpc5200-common.h | 2 -- include/configs/mcc200.h | 2 -- include/configs/mcx.h | 1 - include/configs/mecp5123.h | 2 -- include/configs/mecp5200.h | 2 -- include/configs/meesc.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/mimc200.h | 2 -- include/configs/motionpro.h | 2 -- include/configs/mpc5121ads.h | 1 - include/configs/mpc7448hpc2.h | 2 -- include/configs/mpc8308_p1m.h | 1 - include/configs/mpq101.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/muas3001.h | 2 -- include/configs/munices.h | 1 - include/configs/mv-common.h | 1 - include/configs/mx1ads.h | 1 - include/configs/mx25pdk.h | 1 - include/configs/mx31ads.h | 2 -- include/configs/mx31pdk.h | 2 -- include/configs/mx35pdk.h | 2 -- include/configs/mx51_efikamx.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53ard.h | 1 - include/configs/mx53evk.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx53smd.h | 1 - include/configs/mx6qarm2.h | 1 - include/configs/mx6sabre_common.h | 1 - include/configs/mx6slevk.h | 1 - include/configs/mxs.h | 3 --- include/configs/nhk8815.h | 1 - include/configs/nios2-generic.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/o2dnt-common.h | 1 - include/configs/omap1510inn.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_mvblx.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/omap4_common.h | 1 - include/configs/omap5912osk.h | 1 - include/configs/openrisc-generic.h | 1 - include/configs/origen.h | 2 -- include/configs/otc570.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/p3mx.h | 2 -- include/configs/p3p440.h | 2 -- include/configs/palmtreo680.h | 1 - include/configs/pb1x00.h | 2 -- include/configs/pcm030.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcs440ep.h | 2 -- include/configs/pdm360ng.h | 1 - include/configs/pdnb3.h | 1 - include/configs/pf5200.h | 2 -- include/configs/pm9261.h | 2 -- include/configs/pm9263.h | 2 -- include/configs/pm9g45.h | 1 - include/configs/ppmc7xx.h | 1 - include/configs/ppmc8260.h | 1 - include/configs/pxa255_idp.h | 1 - include/configs/qemu-malta.h | 1 - include/configs/qemu-mips.h | 2 -- include/configs/qemu-mips64.h | 2 -- include/configs/qong.h | 2 -- include/configs/quad100hd.h | 2 -- include/configs/quantum.h | 2 -- include/configs/r0p7734.h | 1 - include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rpi_b.h | 3 --- include/configs/rsdproto.h | 2 -- include/configs/s5p_goni.h | 2 -- include/configs/s5pc210_universal.h | 2 -- include/configs/sacsng.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sandbox.h | 2 -- include/configs/sbc35_a9g20.h | 1 - include/configs/sbc405.h | 2 -- include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sc3.h | 2 -- include/configs/sh7752evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/siemens-am33x-common.h | 2 -- include/configs/smdk2410.h | 2 -- include/configs/smdkc100.h | 2 -- include/configs/smdkv310.h | 2 -- include/configs/snapper9260.h | 1 - include/configs/snowball.h | 1 - include/configs/socfpga_cyclone5.h | 1 - include/configs/socrates.h | 1 - include/configs/spc1920.h | 2 -- include/configs/spear-common.h | 1 - include/configs/spieval.h | 2 -- include/configs/stamp9g20.h | 1 - include/configs/stxgp3.h | 1 - include/configs/stxssa.h | 1 - include/configs/stxxtc.h | 2 -- include/configs/svm_sc8xx.h | 2 -- include/configs/t4qds.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tb0229.h | 2 -- include/configs/tegra-common.h | 2 -- include/configs/ti814x_evm.h | 2 -- include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/titanium.h | 1 - include/configs/tnetv107x_evm.h | 1 - include/configs/tny_a9260.h | 1 - include/configs/top9000.h | 1 - include/configs/trats.h | 2 -- include/configs/tricorder.h | 1 - include/configs/trizepsiv.h | 1 - include/configs/tt01.h | 2 -- include/configs/tx25.h | 1 - include/configs/u8500_href.h | 1 - include/configs/uc100.h | 2 -- include/configs/utx8245.h | 1 - include/configs/v37.h | 2 -- include/configs/v38b.h | 2 -- include/configs/vct.h | 1 - include/configs/ve8313.h | 1 - include/configs/vexpress_common.h | 1 - include/configs/vf610twr.h | 1 - include/configs/virtlab2.h | 2 -- include/configs/vision2.h | 1 - include/configs/vl_ma2sc.h | 1 - include/configs/vme8349.h | 1 - include/configs/vpac270.h | 1 - include/configs/wandboard.h | 1 - include/configs/woodburn_common.h | 3 --- include/configs/x600.h | 1 - include/configs/xaeniax.h | 1 - include/configs/xilinx-ppc.h | 1 - include/configs/xpedite1000.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/zeus.h | 2 -- include/configs/zmx25.h | 1 - include/configs/zynq.h | 1 - 485 files changed, 5 insertions(+), 777 deletions(-)

diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index a46baf2..c985401 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -15,9 +15,6 @@

#define CONFIG_NR_DRAM_BANKS_MAX 2

-/* 1KHz clock tick */ -#define CONFIG_SYS_HZ 1000 - /* UART configuration */ #if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6) #define CONFIG_SYS_NS16550_SERIAL diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index d870d12..1da386e 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -155,13 +155,6 @@ #ifndef CONFIG_SYS_MAXARGS # define CONFIG_SYS_MAXARGS 16 #endif -#if defined(CONFIG_SYS_HZ) -# if (CONFIG_SYS_HZ != 1000) -# warning "CONFIG_SYS_HZ must always be 1000" -# endif -# undef CONFIG_SYS_HZ -#endif -#define CONFIG_SYS_HZ 1000

/* Blackfin POST tests */ #ifdef CONFIG_POST_BSPEC1_GPIO_LEDS diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index e59ee96..937d385 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -53,4 +53,9 @@ #define HAVE_BLOCK_DEVICE #endif

+#ifdef CONFIG_SYS_HZ +#warning "CONFIG_SYS_HZ must be 1000 and not be defined by platforms" +#endif +#define CONFIG_SYS_HZ 1000 + #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 90a2176..8f3a672 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -168,7 +168,6 @@ */

#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_SYS_HZ 1000

/* Bit-field values for MCCR1. */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 37bcac3..1ddfdaf 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -177,8 +177,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

/* Only interrupt boot if space is pressed */ diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 1105179..7f757b0 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -128,8 +128,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

/*----------------------------------------------------------------------- diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 54de966..29d704d 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -123,8 +123,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 1a159ad..ffe380d 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -82,8 +82,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* Default load address */

-#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 2f0bc6b..071519b 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -725,7 +725,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/

/* * For booting Linux, the board info and command line data diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 0c50919..528bef1 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -445,8 +445,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 948394e..aea04ec 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -372,7 +372,6 @@ extern unsigned long get_sdram_size(void); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 03f3a4f..b1217d6 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -614,7 +614,6 @@ combinations. this should be removed later /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq:1ms ticks */

/* diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 83779ef..714edf8 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -401,7 +401,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 3906863..16d539b 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -185,8 +185,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

/*----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 323eac3..29f933b 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -121,8 +121,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 9a083b7..2ce6cb7 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -180,7 +180,6 @@ */

#define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000

/* Bit-field values for MCCR1. diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index bd9fd6e..3a6706f 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -111,8 +111,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOOPW 1 /* enable loopw command */

#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 94ef16e..dc439b6 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -124,8 +124,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOOPW 1 /* enable loopw command */

#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 8383c19..5606f71 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -133,8 +133,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING /* add command line history */

#define CONFIG_LOOPW 1 /* enable loopw command */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index ec9f5ae..8d9aee6 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -132,8 +132,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING /* add command line history */

#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index ba926ab..70b4734 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -134,8 +134,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOOPW 1 /* enable loopw command */

#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index cd2fa95..a2068e2 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -219,7 +219,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */

#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index dc4df29..b727aa9 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -111,8 +111,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

/*----------------------------------------------------------------------- diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index a85a418..e217cba 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -186,8 +186,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */

/* diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 7bbcb77..9268ec9 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -200,8 +200,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */

#define CONFIG_LOOPW diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index fa3efab..3a76243 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -70,7 +70,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_IDENT_STRING "Cray L1" #define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SOURCE 1

diff --git a/include/configs/CU824.h b/include/configs/CU824.h index f6f05a4..b45124d 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -144,7 +144,6 @@ */

#define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000

/* Bit-field values for MCCR1. */ diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index 2000a88..502ed24 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -300,7 +300,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"

#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */

diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index e0f7e46..d13b357 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -238,7 +238,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"

#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */

diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 872a2b4..72f65fd 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -98,8 +98,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 5b9e0d2..c6fa2c7 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -115,8 +115,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 0827113..b37c579 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -327,8 +327,6 @@ int du440_phy_addr(int devnum); #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index fb2f3be..d52721c 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -96,8 +96,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

/* diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index 69f44b1..a9d62c8 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -120,8 +120,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Environment Variables and Storages */ diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h index 1d9d0df..348f671 100644 --- a/include/configs/EP88x.h +++ b/include/configs/EP88x.h @@ -77,8 +77,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* Default load address */

-#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index 7d2fb47..347f8b6 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -84,8 +84,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index fc8b921..2026c02 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -124,8 +124,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 100000000 /* 100 MHz */

#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index d1b9f97..2b5ffd5 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -116,8 +116,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index 35c0c7e..50de4ea 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -152,8 +152,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index 559a83f..d48460b 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -98,8 +98,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index a5d1a9c..6c2dbf6 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -94,8 +94,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x40040000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 002a804..90c4068 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -130,8 +130,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index 5eaf2f8..93a233c 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -130,8 +130,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 5a74abc..2cdaa69 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -150,8 +150,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */

diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 06c0e50..2822a08 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -310,11 +310,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x01000000

/* - * Set decrementer frequency (1 ms ticks) - */ -#define CONFIG_SYS_HZ 1000 - -/* * Device memory map (after SDRAM remap to 0x0): * * CS Device Base Addr Size diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index c5ca279..6a34b12 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -142,8 +142,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }

/* diff --git a/include/configs/HH405.h b/include/configs/HH405.h index d20ca77..0f45cda 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -175,8 +175,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index ddeccb0..f5e6565 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -70,7 +70,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index cf796bf..00413b4 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -117,8 +117,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h index 5aaa976..f3f2136 100644 --- a/include/configs/HWW1U1A.h +++ b/include/configs/HWW1U1A.h @@ -53,8 +53,6 @@

/* Enable IRQs and watchdog with a 1000Hz system decrementer */ #define CONFIG_CMD_IRQ -#define CONFIG_SYS_HZ 1000 -

/* -------------------------------------------------------------------- */

diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index 40d0d7c..b1869e8 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -153,8 +153,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 590abc3..4ce3c81 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -196,8 +196,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */

/* diff --git a/include/configs/IP860.h b/include/configs/IP860.h index c852ca9..e963cd8 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -116,8 +116,6 @@

#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index cbc8b5b..3e24d8c 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -154,8 +154,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0x04400000

#define CONFIG_MISC_INIT_R 1 /* We need misc_init_r() */ diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index b0287e2..f80987c 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -141,8 +141,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* Default load address */

-#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0x09900000

#define CONFIG_MISC_INIT_R /* We need misc_init_r() */ diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index 53b51f3..f63e126 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -111,8 +111,6 @@ #define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010) /* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020) /* PC 10 */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 70e201a..bcc5475 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -108,8 +108,6 @@ #define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010) /* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020) /* PC 10 */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index df29c7d..58cf9db 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -315,8 +315,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 6439d99..dad5603 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -192,8 +192,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_PPC4XX #define CONFIG_SYS_I2C_PPC4XX_CH0 diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 2cbb6ee..44a9369 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -283,7 +283,4 @@ #define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */

-#define CONFIG_SYS_HZ 100 /* decr freq: 1 ms ticks */ - - #endif /* __CONFIG_H */ diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index ef51e35..eafb341 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -172,8 +172,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }

#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index 6da07e7..c987e9e 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -191,8 +191,6 @@ #define CONFIG_SYS_MEMTEST_END 0x003C00000 /* 4 ... 60 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }

#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index fe901ce..72107e0 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -113,7 +113,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */ #define CONFIG_SYS_PLL_ODR 0x36 #define CONFIG_SYS_PLL_FDR 0x7D diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 1d10f7f..3d999ad 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -176,8 +176,6 @@

#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000

/* diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index aaaaa41..7078084 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000)

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 75000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2

diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 2a1a904..3f6e937 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000

-#define CONFIG_SYS_HZ 1000 - /* * Clock configuration: enable only one of the following options */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 83122cf..d837e42 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -124,8 +124,6 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc. #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000

-#define CONFIG_SYS_HZ 1000 - #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 109b1c0..bdbb413 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -93,8 +93,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000

-#define CONFIG_SYS_HZ 1000 - #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 434c839..d12f00f 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -129,7 +129,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x20000 #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 66000000

/* diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index bacee0a..c6d986c 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -139,7 +139,6 @@ "save\0" \ ""

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 150000000

/* diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index d22018f..fd970d0 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -117,7 +117,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 64000000

/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 0ced196..e2ec34e 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3

diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 86b06f4..46b890e 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -126,7 +126,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3

diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index cca7609..b67dad0 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -126,7 +126,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3

diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index bc26427..2eb93be 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -253,8 +253,6 @@

#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000

/* diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 72ad836..50c528f 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -187,8 +187,6 @@

#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000

/* diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 3dc87d6..d97218d 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -246,8 +246,6 @@

#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000

/* diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index dc38219..cdaaf7f 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -172,7 +172,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2

diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 0307f19..47dbe9e 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -158,7 +158,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2

diff --git a/include/configs/MBX.h b/include/configs/MBX.h index b3cd12d..e6e1dfd 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -98,8 +98,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 8d1ca48..74f44df 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -72,8 +72,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index ad9c77e..61e2a08 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -367,7 +367,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000

#define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 1e50032..b3e51b0 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -348,7 +348,4 @@ #define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */

-#define CONFIG_SYS_HZ 100 /* decr freq: 1 ms ticks */ - - #endif /* __CONFIG_H */ diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 75eef20..d67ae84 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -144,8 +144,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x300000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index c535dbe..54fe3de 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -180,8 +180,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index f9fc8ff..4c25a44 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -153,7 +153,6 @@

#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 -#define CONFIG_SYS_HZ 1000

#define CONFIG_SYS_ETH_DEV_FN 0x00 #define CONFIG_SYS_ETH_IOBASE 0x00104000 diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 0f6ca94..fcfbe55 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -287,8 +287,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_FLASH_BASE 0xff800000 diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 5a101cf..cf6f01a 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -229,8 +229,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_FLASH_BASE 0xFE000000 diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index d315729..f90f6dc 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -471,7 +471,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index ddcbfa6..1e35249 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -520,7 +520,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index fef19d4..5d3f84d 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -532,7 +532,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index d5db65d..f7608ec 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -368,7 +368,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 32e05af..f088b26 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -454,7 +454,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 432db72..39a658d 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -520,7 +520,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index c3a577f..8655265 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -562,7 +562,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 7c4f3ef..919b175 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -557,7 +557,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 1973447..6842b4b 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -418,7 +418,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 51688a7..0c3ef5a 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -536,7 +536,6 @@ extern int board_pci_host_broken(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index a5fe220..6d55fb8 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -551,7 +551,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 8ff2c3a..033024b 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -730,7 +730,6 @@ + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index acd37a0..ade5188 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -387,7 +387,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 61775d2..3d3e345 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -400,7 +400,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 7f16285..6f8cc18 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -431,7 +431,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 8deb241..3f68dd5 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -525,7 +525,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 1ec3797..affae4c 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -398,7 +398,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 49f6a35..b511c59 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -428,7 +428,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 2d5e8c0..6f66463 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -420,7 +420,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index c35fd2b..945d44a 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -556,7 +556,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index acd3981..ac4f100 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -670,7 +670,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 0b2cf87..0557586 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -508,7 +508,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 0945ae1..84630a6 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -661,7 +661,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index 96efc63..b08e86e 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -151,7 +151,6 @@ */

#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_SYS_HZ 1000

/* Bit-field values for MCCR1. */ diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index b7bc920..68e8539 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -266,8 +266,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x02f00000

-#define CONFIG_SYS_HZ 1000 - /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000 /* default location for tftp and bootm */ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 044a1bc..8f71a54 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -292,7 +292,6 @@ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000

/* * For booting Linux, the board info and command line data diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 0968b86..e37050d 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -209,7 +209,6 @@ */

#define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 10000

/* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 7 diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index 2ddca10..4bc0086 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -103,8 +103,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index 47f5c32..f9c49c8 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -236,8 +236,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x02f00000

-#define CONFIG_SYS_HZ 1000 - /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000 /* default location for tftp and bootm */ diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index dc4a768..2d42a3d 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -124,6 +124,5 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000

#endif /* __MIGO_R_H */ diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index dbf2efc..7b7198b 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -136,8 +136,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 53b0f13..290e82c 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -149,8 +149,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 18ab2cc..7ff50ce 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -137,8 +137,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index 0fd635d..88beac2 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -119,8 +119,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 46faa5d..ab1fffb 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -138,8 +138,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NX823.h b/include/configs/NX823.h index 635f9ce..e903116 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -83,8 +83,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index c919613..e4af3f5 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -107,8 +107,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

/*----------------------------------------------------------------------- diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index 56d251c..c562344 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -105,8 +105,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

/*----------------------------------------------------------------------- diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index ba3f7c2..88d6e0b 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -675,7 +675,6 @@ extern unsigned long get_sdram_size(void); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */

/* * Internal Definitions diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index edece1f..b4bdad2 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -715,7 +715,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000

/* * For booting Linux, the board info and command line data diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index cd6d20c..00a9b2f 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -323,7 +323,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index a8202c6..5a7a9d1 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -459,7 +459,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index adaed56..d6537d4 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -596,7 +596,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index 08d1c25..11f08c8 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -422,7 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 785e497..89072a3 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -660,7 +660,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 862614b..e43d01a 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -667,7 +667,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index 6328ba9..028c8b6 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -150,8 +150,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */

#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 732fe64..d823b0f 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -94,8 +94,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }

diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index a71a521..2dacc7e 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -110,8 +110,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #undef CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h index 84ef49c..4812de7 100644 --- a/include/configs/PCI5441.h +++ b/include/configs/PCI5441.h @@ -101,7 +101,6 @@ * If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 2251ca6..6a2dac8 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -173,8 +173,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 115c89a..f29861e 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -111,7 +111,6 @@ * If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 3c31cfb..58fccc3 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -134,8 +134,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 7ab1d84..c6dc745 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -266,8 +266,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index b466513..5f6b27a 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -183,8 +183,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */

/* diff --git a/include/configs/PM828.h b/include/configs/PM828.h index cb68c41..88e4719 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -183,8 +183,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */

/* diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 67a96d2..5407594 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -128,8 +128,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */

diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 531e956..54316a6 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -104,8 +104,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index a54c099..8efcdc3 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -388,8 +388,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h index fbf8a99..c6753d8 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -92,7 +92,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

#define CONFIG_PRAM 1024 /* reserve 1 MB protected RAM */

diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index cd9eb4b..45380ed 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -194,8 +194,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

/*----------------------------------------------------------------------- diff --git a/include/configs/QS823.h b/include/configs/QS823.h index d712828..8a73705 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -236,8 +236,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 3229095..1750854 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -236,8 +236,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 7c77c6b..dc5b872 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -146,8 +146,6 @@ CONFIG_SPI

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index efe6995..fba489f 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -149,8 +149,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * JFFS2 partitions */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 3970dc3..aa08c31 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -134,8 +134,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x0100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index 6ba8a02..0c3dd11 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -116,8 +116,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index ada7e14..2111f6e 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -115,8 +115,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index ffc84d2..50c82c6 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -162,8 +162,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index d4d3d57..7f01450 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -214,7 +214,6 @@ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/* * Low Level Configuration Settings diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 06273a2..29d5967 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -160,8 +160,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index 1404634..df91b43 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -170,8 +170,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_FLASH_BASE 0xFE000000 diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 3448ef3..486d7fa 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -366,7 +366,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 5d48f8f..36d9c8c 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -91,8 +91,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index 64596b3..4a41468 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -103,8 +103,6 @@

#define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index e2b05de..08e78cd 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -170,8 +170,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index ed8a32f..29d3d67 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -104,7 +104,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 97e8968..aa02795 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -72,7 +72,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index bce4176..234fe70 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -84,8 +84,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000

-#define CONFIG_SYS_HZ 1000 - /* * Clock configuration: enable only one of the following options */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 1fa4714..b712d68 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -410,8 +410,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index 7f2b842..35b1588 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -175,8 +175,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 00056a3..84fe6e9 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -332,8 +332,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 5c5ce84..6666a12 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -68,7 +68,6 @@ #define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK #define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK #define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK

/*----------------------------------------------------------------------- diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 8a4dd35..935b5d3 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -632,8 +632,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 0221d16..5b1b242 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -146,8 +146,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 514bbec..2aafb7c 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -141,8 +141,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 1b02cbb..ffe8d4a 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -247,8 +247,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */

/* diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 3f586fb..d21f950 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -311,8 +311,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x300000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0x40000104 /* "bad" address */

/* diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 07b5acb..53b47b6 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -334,7 +334,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

#undef CONFIG_WATCHDOG /* watchdog disabled */

diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index fc854d9..db4b445 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -130,8 +130,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 7bf685d..3c73054 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -131,8 +131,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index f8bf75b..232ebfe 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -134,8 +134,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 37e3541..67653cb 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -164,8 +164,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index a6e36b3..8b3cc6d 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -133,8 +133,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 78ecb47..80335ae 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -134,8 +134,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 379698a..85a2458 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -137,8 +137,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index ca7dd35..f9cf077 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -137,8 +137,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 9cf263c..33729f0 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -177,8 +177,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 1f52efc..536df3f 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -173,8 +173,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 9d88199..a81bcb8 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -294,8 +294,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 2034493..79a6079 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -162,7 +162,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x30800000

/* we configure PWM Timer 4 to 1ms 1000Hz */ -#define CONFIG_SYS_HZ 1000

/* support additional compression methods */ #define CONFIG_BZIP2 diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index a1dad2b..d7e6446 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -132,8 +132,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 5daf175..b115e4f 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -119,8 +119,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index c4f680b..162b800 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -232,7 +232,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000

/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000

/* configure flash */ #define CONFIG_SYS_FLASH_BASE 0xff800000 diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 51cfcf6..81ecb5d 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -126,8 +126,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 6769c0d..3814266 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -134,8 +134,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index f38d90e..9534b6d 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -121,8 +121,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index 2160694..f4ba208 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -154,8 +154,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index ec86023..2f30424 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -146,8 +146,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ - #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */

#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index bcb7ab4..0d3cf36 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -37,7 +37,6 @@ /* * Timer */ -#define CONFIG_SYS_HZ 1000 /* timer ticks per second */

/* * Real Time Clock diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 43d3d99..9e50dba 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -265,7 +265,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000

-#define CONFIG_SYS_HZ 1000 #define CONFIG_LOOPW #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/

diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index d243bc1..3efd513 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -286,8 +286,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index a2090da..1205557 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -440,9 +440,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

-/* decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 33669c2..80b8356 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -79,7 +79,6 @@

/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000

/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/actux2.h b/include/configs/actux2.h index 533f469..75126bc 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -72,7 +72,6 @@

/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000

/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/actux3.h b/include/configs/actux3.h index 76b5efd..94059b6 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -70,7 +70,6 @@

/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000

/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/actux4.h b/include/configs/actux4.h index 1df0a7c..94cb80d 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -77,7 +77,6 @@

/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66000000 -#define CONFIG_SYS_HZ 1000

/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h index 81f71b9..e31131f 100644 --- a/include/configs/adp-ag101.h +++ b/include/configs/adp-ag101.h @@ -40,12 +40,6 @@ /* * Timer */ - -/* - * According to the discussion in u-boot mailing list before, - * CONFIG_SYS_HZ at 1000 is mandatory. - */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ 48000000 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ

diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 48afbf4..ded3f33 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -40,12 +40,6 @@ /* * Timer */ - -/* - * According to the discussion in u-boot mailing list before, - * CONFIG_SYS_HZ at 1000 is mandatory. - */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ 39062500 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ

diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index 681dfa2..1e4ce2e 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -32,12 +32,6 @@ /* * Timer */ - -/* - * According to the discussion in u-boot mailing list before, - * CONFIG_SYS_HZ at 1000 is mandatory. - */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ (66000000 * 2) #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ

diff --git a/include/configs/aev.h b/include/configs/aev.h index 6c0b034..fd44fca 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -338,8 +338,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index be2f207..a3e4fd2 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -17,7 +17,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000

#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 5431b09..8542764 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -255,8 +255,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 1fd2508..c5e67bf 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -239,7 +239,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 6500878..5ff65c6 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -231,7 +231,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 5c802a1..59846f3 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -75,7 +75,6 @@

#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* NS16550 Configuration */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 580d079..ff5bac4 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -90,8 +90,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_LOOPW /* enable loopw command */ diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index af3a427..2be28f9 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -156,6 +156,5 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000

#endif /* __AP325RXA_H */ diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index b911291..e8d2650 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -159,6 +159,5 @@ #define CONFIG_SYS_CLK_FREQ 44444444 #endif #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

#endif /* __AP_SH4A_4A_H */ diff --git a/include/configs/aria.h b/include/configs/aria.h index 68f25ea..5a72fcb 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -485,8 +485,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

-#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 9f357ea..3694340 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -139,6 +139,5 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 50000000 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

#endif /* __ARMADILLO_800EVA_H */ diff --git a/include/configs/arndale.h b/include/configs/arndale.h index ed44a04..45fa047 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -144,8 +144,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_RD_LVL

#define CONFIG_NR_DRAM_BANKS 8 diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index ed9400e..0a89368 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -110,10 +110,8 @@ /* * Defines processor clock - important for correct timings concerning serial * interface etc. - * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms */

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3) #define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index e158b0d..c03f385 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -43,7 +43,6 @@ #define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 ) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000

/* CPU configuration */ #define CONFIG_AT91RM9200 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index d7fd6b0..ce0ca80 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -28,7 +28,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000

/* Define actual evaluation board type from used processor type */ #ifdef CONFIG_AT91SAM9G20 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index af56604..fcdf044 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -14,7 +14,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000

#ifdef CONFIG_AT91SAM9G10 #define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 40e167c..5a39392 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -26,7 +26,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000

#define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index fc4ecec..2095fe6 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -21,7 +21,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_AT91SAM9M10G45EK #define CONFIG_AT91FAMILY diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 28a7925..415a997 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -24,7 +24,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000

/* Misc CPU related */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index b08848e..3747098 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -18,7 +18,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 4a2ac9a..bb126b0 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -16,7 +16,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_AT91SAM9X5EK #define CONFIG_AT91FAMILY diff --git a/include/configs/atc.h b/include/configs/atc.h index b661e95..b03b148 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -153,8 +153,6 @@

#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */

#define CONFIG_SYS_ALLOC_DPRAM diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index c87e414..597bede 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -15,8 +15,6 @@ #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100

-#define CONFIG_SYS_HZ 1000 - /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 8e4ad07..bd4dca5 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -18,12 +18,6 @@ #define CONFIG_ATNGW100MKII

/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency. diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 5be563c..fd76572 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -17,12 +17,6 @@ #define CONFIG_ATSTK1000

/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index a49d0ad..2562460 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -17,12 +17,6 @@ #define CONFIG_ATSTK1000

/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 7f3976c..8e32a10 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -17,12 +17,6 @@ #define CONFIG_ATSTK1000

/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 97470df..9ce2264 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -16,11 +16,6 @@ #define CONFIG_ATSTK1006 #define CONFIG_ATSTK1000

-/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000

/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL diff --git a/include/configs/calimain.h b/include/configs/calimain.h index d20074c..febee45 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq() #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x60000000 #define CONFIG_DA850_LOWLEVEL #define CONFIG_SYS_DA850_PLL_INIT diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index db9eb0f..6f6c9b0 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -17,7 +17,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM365

#define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 7b90dcb..949202b 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -189,8 +189,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */

#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 5cf456a..d5db8f5 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -143,7 +143,6 @@ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

#define CONFIG_CMDLINE_EDITING

diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index b401995..275024b 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -75,8 +75,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */

-#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index d792240..458e3c4 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -75,8 +75,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */

-#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index cfd63ad..17deafd 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -296,7 +296,6 @@ #define CONFIG_LOOPW 1

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/* * Various low-level settings diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index bc5b66c..38fe064 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -258,7 +258,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index 417c873..7549a64 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -97,8 +97,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 885dfd4..26ccf01 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -37,11 +37,9 @@ /* --- * Defines processor clock - important for correct timings concerning serial * interface etc. - * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms * --- */

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 66000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */

diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index 4a8e583..c004651 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -139,8 +139,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

/* diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index c57d702..10db636 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -104,8 +104,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_ALLOC_DPRAM diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 290a08d..00f25a5 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -101,7 +101,6 @@ /* * Clock Configuration */ -#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */

/* diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index c6aad01..92d25e0 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -440,7 +440,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_HW_WATCHDOG #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 47215e5..e081b06 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -222,7 +222,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x01000000 #define CONFIG_SYS_LOAD_ADDR 0x100000 -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * SDRAM Configuration diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index c3fb80c..2d2a853 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -662,7 +662,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index 05529c8..8a6fdcd 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -268,8 +268,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */

#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 5b79ace..021be83 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -20,7 +20,6 @@ #define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)

#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768

#if defined(CONFIG_CPU9G20) diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index c56fdd7..555cc55 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -25,7 +25,6 @@ #define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000

#define CONFIG_ARM920T #define CONFIG_AT91RM9200 diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 49a144f..d64996e 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -121,8 +121,6 @@

#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 7705a5d..3de16f6 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -121,7 +121,6 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 3e71ae5..c4cc62e 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index e63d7c4..503e96e 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT

diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 96d35c5..b75371e 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -18,7 +18,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM355

/* Memory Info */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index f7adbd8..234bbc0 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -17,7 +17,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM355 /* DM355 based board */

/* Memory Info */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 82dc1a2..b631154 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -18,7 +18,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM365

/* Memory Info */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 7f57877..2132342 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -27,7 +27,6 @@ extern unsigned int davinci_arm_clk_get(void); /* Timer Input clock freq */ #define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM646X

/* EEPROM definitions for EEPROM */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index a49a989..db112e7 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -44,7 +44,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 1595bc7..18853bd 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -22,7 +22,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /*=============*/ /* Memory Info */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 6ebbe81..44449df 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -19,7 +19,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /* EEPROM definitions for Atmel 24LC64 EEPROM chip */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 3eaa7c0..3f5ae6e 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -46,7 +46,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 07c60ab..da4ff8e 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -133,8 +133,6 @@

#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */

#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ diff --git a/include/configs/debris.h b/include/configs/debris.h index c9fb8d7..d74a541 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -149,7 +149,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index cb79b4e..5fd9ccb 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -257,7 +257,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 30e3908..6b3a71a 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -239,7 +239,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index a5215db..02b7f99 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -416,8 +416,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000

-#define CONFIG_SYS_HZ 1000 - /* * Various low-level settings */ diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h index 1418795..3b86de2 100644 --- a/include/configs/dvlhost.h +++ b/include/configs/dvlhost.h @@ -78,7 +78,6 @@

/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000

/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 7321b60..47c180e 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -217,7 +217,6 @@ * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index e08423a..58e40ed 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 #define CONFIG_DA8XX_GPIO diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 08ba883..d1650ee 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -98,7 +98,6 @@ /*----------------------------------------------------------------------* * Clock and PLL Configuration * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */

/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */ diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index ccc7bd0..4ad7bcd 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -60,7 +60,6 @@

#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */ #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)

#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 2c9594b..f84550f 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -180,6 +180,5 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 41666666 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

#endif /* __ECOVEC_H */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 9c70109..8b9f66a 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -34,8 +34,6 @@ * CLKs configurations */

-#define CONFIG_SYS_HZ 1000 - /* * Board-specific values for Orion5x MPP low level init: * - MPPs 12 to 15 are SATA LEDs (mode 5) diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 90033fa..726bbad 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_DA850_LOWLEVEL #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_DA850_PLL_INIT diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index 32d5cd6..421c066 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -154,8 +154,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_FLASH_BASE 0xFF800000 diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index aba3392..e072e32 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -359,8 +359,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index bcf01b6..4778a01 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -165,8 +165,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

/*----------------------------------------------------------------------- diff --git a/include/configs/espt.h b/include/configs/espt.h index e906efb..84377f5 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -99,7 +99,6 @@ /* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

/* Ether */ #define CONFIG_SH_ETHER 1 diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index adf14be..5d33c76 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -31,7 +31,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000

/* 32kB internal SRAM */ #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 8c21909..e7992aa 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -177,8 +177,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_RD_LVL

#define CONFIG_NR_DRAM_BANKS 8 diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index 14f0784..fc015e6 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -18,12 +18,6 @@ #define CONFIG_FAVR32_EZKIT_EXT_FLASH

/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/flea3.h b/include/configs/flea3.h index cfcaf1b..531ace3 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -130,8 +130,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 - /* * Physical Memory Map */ diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 47e65d8..29905c2 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -352,7 +352,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

#define CONFIG_DISPLAY_BOARDINFO 1

diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index 4f286bd..38cab12 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -304,8 +304,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index fac7f1c..ba3e45a 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -293,8 +293,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * USB stuff *----------------------------------------------------------------------- diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index 7f0c5be..af7ec11 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -252,8 +252,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index c288b39..938ee86 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -16,12 +16,6 @@ #define CONFIG_AT32AP7000

/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 6124519..9bbbded 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -279,8 +279,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /***** Gaisler GRLIB IP-Cores Config ********/

/* AMBA Plug & Play info display on startup */ diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 2226f5b..d387af9 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -277,8 +277,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /***** Gaisler GRLIB IP-Cores Config ********/

#define CONFIG_SYS_GRLIB_SDRAM 0 diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 545fa85..dffed3e 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -352,7 +352,6 @@ #define CONFIG_CLOCKS_IN_MHZ

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/* memtest works from the end of the exception vector table diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 19ecc9a..d026484 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -17,8 +17,6 @@

#define CONFIG_SYS_NO_FLASH

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 38c70ac..3f2fadb 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -13,8 +13,6 @@ #define CONFIG_AT32AP7000 #define CONFIG_HAMMERHEAD

-#define CONFIG_SYS_HZ 1000 - /* * Set up the PLL to run at 125 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index b8197ac..73e1624 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg" diff --git a/include/configs/hermes.h b/include/configs/hermes.h index 1af5296..55a47c8 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -87,8 +87,6 @@

#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ /* * Low Level Configuration Settings diff --git a/include/configs/highbank.h b/include/configs/highbank.h index afb6e64..016305a 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -12,8 +12,6 @@ #define CONFIG_SYS_THUMB_BUILD

#define CONFIG_SYS_NO_FLASH -#define CFG_HZ 1000 -#define CONFIG_SYS_HZ CFG_HZ

#define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 747c43c..475d3ff 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -237,8 +237,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/hymod.h b/include/configs/hymod.h index f73de68..173cfc6 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -271,8 +271,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_I2C_SPEED 50000 diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h index 3e18a65..2c69d4e 100644 --- a/include/configs/igep0033.h +++ b/include/configs/igep0033.h @@ -144,7 +144,6 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */

/* NS16550 Configuration */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 9982cf6..64f10f4 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -238,7 +238,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* * Physical Memory Map diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index ae6828b..ad1614a 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -111,7 +111,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index cda7e0d..8236133 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -16,7 +16,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX27 #define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 30c65da..9bdfbe4 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -117,8 +117,6 @@

#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING 1

/*----------------------------------------------------------------------- diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 720e1bf..a7dab58 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -121,8 +121,6 @@

#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING

/* diff --git a/include/configs/incaip.h b/include/configs/incaip.h index 0ff9a7f..7d2715d 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -106,8 +106,6 @@

#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000

#define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 5cc686f..363f2cd 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -348,8 +348,6 @@ static inline void tws_data_config_output(unsigned output)

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 910c243..00f9004 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_TEXT_BASE 0x01000000 #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 82d4298..3b5a1cd 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index 50fd995..505ba24 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -297,7 +297,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_LOOPW

/* diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index d0609f6..b34e342 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -12,7 +12,6 @@

#define CONFIG_MB86R0x #define CONFIG_MB86R0x_IOCLK get_bus_freq(0) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x10000000

#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ diff --git a/include/configs/jornada.h b/include/configs/jornada.h index 71f1e72..7e18d8e 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -70,7 +70,6 @@ #define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 }

diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 01c087b..94e166e 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -262,8 +262,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index a82987d..c4735f8 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -54,8 +54,6 @@

#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */

-#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */ - #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

diff --git a/include/configs/korat.h b/include/configs/korat.h index 7c7a305..5beac50 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -324,8 +324,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 5485a42..92d906c 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -96,7 +96,6 @@ #define CONFIG_SYS_MEMTEST_END 0x07C00000

#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000

#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 222725c..9f0cd56 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -126,8 +126,6 @@ #define CONFIG_SYS_CLK_FREQ (48000000) #define CONFIG_SYS_CPU_CLK (1196000000) #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CFG_HZ (1000) -#define CONFIG_SYS_HZ CFG_HZ

/* Ether */ #define CONFIG_NET_MULTI diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 932dac3..31ebabb 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -306,7 +306,6 @@ /* FIXME: 32.768 MHz is the crystal frequency but */ /* the real frequency is lower by about 0.75% */ #define CONFIG_SYS_CLK_FREQ 32768000 -#define CONFIG_SYS_HZ 1000

/* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 0 diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h index 6df6f2b..cd96732 100644 --- a/include/configs/lp8x4x.h +++ b/include/configs/lp8x4x.h @@ -117,11 +117,6 @@ #define CONFIG_AUTO_COMPLETE 1

/* - * Clock Configuration - */ -#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ - -/* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 08d633b..36769e5 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -111,7 +111,6 @@

#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */

#ifdef CONFIG_MMC diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 459c047..3feb261 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -213,8 +213,6 @@

#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * When the watchdog is enabled, output must be fast enough in Linux. */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 96f3ba5..0e0cf5c 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -482,8 +482,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index ccb07e3..b0bb31b 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -10,7 +10,6 @@

#define CONFIG_MX53 #define CONFIG_MXC_GPIO -#define CONFIG_SYS_HZ 1000

#include <asm/arch/imx-regs.h>

diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index 29ea304..1bbc67d 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -143,8 +143,6 @@ /*use Hardware WDT */ #define CONFIG_HW_WATCHDOG

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 487574f..b46d180 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -303,8 +303,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 5e27ab2..4619dfb 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -303,7 +303,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* * Physical Memory Map diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index b48872b..9aec2d3 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -343,8 +343,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

-#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 601bb79..e01b9cd 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -250,8 +250,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */

#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index d2ec83c..18f5262 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -40,7 +40,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */

/* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 0e3de77..aa8d59d 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -399,7 +399,6 @@

/* architecture dependent code */ #define CONFIG_SYS_USR_EXCEP /* user exception */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"

diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 82f653e..3d79239 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -17,8 +17,6 @@

#define CONFIG_MIMC200_EXT_FLASH

-#define CONFIG_SYS_HZ 1000 - /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index d7383a6..efaf8b6 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -380,8 +380,6 @@ extern void __led_set(led_id_t id, int state);

#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 85ae367..6c62ea1 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -498,7 +498,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index f8c4627..6358526 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -187,8 +187,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 6875cf4..da5dc06 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -421,7 +421,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h index 55d93da..6d0d392 100644 --- a/include/configs/mpq101.h +++ b/include/configs/mpq101.h @@ -334,7 +334,6 @@

#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 7e18723..3a56539 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -68,7 +68,6 @@ /* Clocks */ #define CONFIG_SYS_CLK_FREQ 24000000 #define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000

/* UART */ #define CONFIG_SCIF_CONSOLE 1 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index bc8bb8d..ed4197a 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -86,7 +86,6 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000

/* PCMCIA */ #define CONFIG_IDE_PCMCIA 1 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index a757737..b75a847 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -112,6 +112,5 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000

#endif /* __MS7722SE_H */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index c4c96bf..439b888 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -83,6 +83,5 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

#endif /* __MS7750SE_H */ diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index 950d71b..2816bcb 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -196,8 +196,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/munices.h b/include/configs/munices.h index 7700a1d..c50c647 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -176,7 +176,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

#define CONFIG_DISPLAY_BOARDINFO 1 #define CONFIG_CMDLINE_EDITING 1 diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index c458dd9..721b75d 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -35,7 +35,6 @@ /* * CLKs configurations */ -#define CONFIG_SYS_HZ 1000

/* * NS16550 Configuration diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 4de4324..f4acb7e 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -114,7 +114,6 @@ #define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */ -/*#define CONFIG_SYS_HZ 1000 */ #define CONFIG_SYS_HZ 3686400 #define CONFIG_SYS_CPUSPEED 0x141

diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 543c415..ccd3b6c 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -12,7 +12,6 @@ /* High Level Configuration Options */

#define CONFIG_MX25 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x81200000 #define CONFIG_MXC_GPIO

diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index b1b6852..3bbc40b 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -135,8 +135,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING 1

/*----------------------------------------------------------------------- diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 69045da..c1ca9b5 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -137,8 +137,6 @@ /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x81000000

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING

/*----------------------------------------------------------------------- diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 68b225a..d712fe7 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -155,8 +155,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 - /* * Physical Memory Map */ diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index f0c6776..1c99045 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -227,7 +227,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING

/*----------------------------------------------------------------------- diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 04f518a..10c7ee9 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -232,7 +232,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING

/*----------------------------------------------------------------------- diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 122ffd0..82ff3cc 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -200,7 +200,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */ diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index d39ce7b..305455f 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -150,7 +150,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 7237da5..d0bcb11 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -192,7 +192,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */ diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 7e4e1c9..d0f428d 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -135,7 +135,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */ diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 1c5c837..2c706b2 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -127,7 +127,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10010000

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

#define CONFIG_CMDLINE_EDITING

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index bf6113b..f97a37c 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -185,7 +185,6 @@ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE (128 * 1024) diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index ca8f2f6..3facf54 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -149,7 +149,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE SZ_128K diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 124dc1e..7ed7a0f 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -41,9 +41,6 @@ * CPU specifics */

-/* Ticks per second */ -#define CONFIG_SYS_HZ 1000 - /* MXS uses FDT */ #define CONFIG_OF_LIBFDT

diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 0997f49..0377b58 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -76,7 +76,6 @@ #define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */

/* timing informazion */ -#define CONFIG_SYS_HZ 1000 /* Mandatory... */ #define CONFIG_SYS_TIMERBASE 0x101E2000

/* serial port (PL011) configuration */ diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h index b528f5a..66e0419 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/nios2-generic.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE #define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ #define CONFIG_SYS_NIOS_TMRCNT \ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 3454b86..2b26faf 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -299,7 +299,6 @@ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

#define CONFIG_CMDLINE_EDITING

diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index cfc5f12..f46357e 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -426,7 +426,6 @@ int rx51_kp_getc(void); */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* * Stack sizes diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index 90c45d5..029100f 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -332,7 +332,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000

/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000

/* * Various low-level settings diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 1a7e5c7..2cb4df5 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -116,7 +116,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index c1245e7..32745c2 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -341,7 +341,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index edf6543..3eae288 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -35,7 +35,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* Size of environment - 128KB */ #define CONFIG_ENV_SIZE (128 << 10) diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index ee6db51..d484bc0 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -265,7 +265,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* * Physical Memory Map diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 0c88419..7dc1117 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -236,7 +236,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 88380a4..4641694 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -217,7 +217,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 91a2568..a83aec3 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -201,7 +201,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index a5e469c..087432a 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -273,7 +273,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index c747d52..ea7e818 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -228,7 +228,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index e9f2383..15f1f4d 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -220,7 +220,6 @@ /* Use General purpose timer 1 */ #define CONFIG_SYS_TIMERBASE GPT2_BASE #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* * SDRAM Memory Map diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 75488de..a7b6b13 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -118,7 +118,6 @@ */ #define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */ #define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ 1000

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h index dfe0258..f295f02 100644 --- a/include/configs/openrisc-generic.h +++ b/include/configs/openrisc-generic.h @@ -55,7 +55,6 @@ /* * TIMER */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_OPENRISC_TMR_HZ 100

/* diff --git a/include/configs/origen.h b/include/configs/origen.h index da13574..bad34b3 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -102,8 +102,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)

-#define CONFIG_SYS_HZ 1000 - /* ORIGEN has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 543209c..8578a1d 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -39,7 +39,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */

/* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 5f0c4fb..bae6f8d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -834,7 +834,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 4aa7064..0458ae8 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -482,7 +482,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index d1c7a1a..5b5d501 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -284,8 +284,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index c4c5093..c338ab8 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -213,8 +213,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index 2ab6fd2..20259f5 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -120,7 +120,6 @@ * Clock Configuration */ #undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */

/* diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index cab9192..e929b23 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -66,8 +66,6 @@

#define CONFIG_SYS_MIPS_TIMER_FREQ 396000000

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */

#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index a608c87..6b5a5d1 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -364,7 +364,6 @@ RTC configuration #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

#define CONFIG_DISPLAY_BOARDINFO 1

diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index e2b4de7..602e534 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -155,7 +155,6 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */

#define CONFIG_CONS_INDEX 1 /* NS16550 Configuration */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 5de8e98..df4ac61 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -293,8 +293,6 @@ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_LYNXKDI 1 /* support kdi files */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 5032119..232d123 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -417,7 +417,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000

/* * For booting Linux, the board info and command line data diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index c664010..852bd88 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -100,7 +100,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */

#define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/*************************************************************** * Platform/Board specific defines start here. diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 027ddd2..d47a18d 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -254,8 +254,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */

#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 67b40b2..37c43f4 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" #define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 2b4335e..eccc027 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263" #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 7d16bd8..51fe0be 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -31,7 +31,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x73f00000

#define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 3f9fdd4..3fa3cfd 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -363,7 +363,6 @@ */

#define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK -#define CONFIG_SYS_HZ 1000

/* diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 7cf12ba..d7782ac 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -315,7 +315,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_LOAD_ADDR 0x140000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

#define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */ /* the exception vector table */ diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index cd3dd76..2303215 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -224,7 +224,6 @@

#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */

#define RTC 1 /* enable 32KHz osc */ diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h index 4e7ad33..03514d1 100644 --- a/include/configs/qemu-malta.h +++ b/include/configs/qemu-malta.h @@ -25,7 +25,6 @@ */ #define CONFIG_SYS_MHZ 250 /* arbitrary value */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000

#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */ #define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index c3a69c5..dd3babb 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -106,8 +106,6 @@

#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)

-#define CONFIG_SYS_HZ 1000 - /* Cached addr */ #define CONFIG_SYS_SDRAM_BASE 0x80000000

diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 7267a81..a1422fc 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -108,8 +108,6 @@

#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)

-#define CONFIG_SYS_HZ 1000 - /* Cached addr */ #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000

diff --git a/include/configs/qong.h b/include/configs/qong.h index c57fddd..36d72cd 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -189,8 +189,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */

diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index a51f2d4..fe5cadb 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -122,8 +122,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */

diff --git a/include/configs/quantum.h b/include/configs/quantum.h index aaf97eb..c9ebe13 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -124,8 +124,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index 0804480..bc28292 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -165,6 +165,5 @@ #define CONFIG_SYS_CLK_FREQ 44444444 #endif #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

#endif /* __R0P7734_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 65dcffb..e6c1c27 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -78,7 +78,6 @@ */ #define CONFIG_SYS_CLK_FREQ 60000000 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */

/* diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index dd1caf1..6eacfb2 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -103,7 +103,6 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

/* PCI Controller */ #if defined(CONFIG_CMD_PCI) diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index 216c6cb..0b7add7 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -30,9 +30,6 @@ */ #define CONFIG_MACH_TYPE MACH_TYPE_BCM2708

-/* Timer */ -#define CONFIG_SYS_HZ 1000 - /* Memory layout */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 2743c9a..69804da 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -143,8 +143,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index c303244..0590d20 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -173,8 +173,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000)

-#define CONFIG_SYS_HZ 1000 - /* Goni has 3 banks of DRAM, but swap the bank */ #define CONFIG_NR_DRAM_BANKS 3 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 97a4008..d9e4c56 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -198,8 +198,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)

-#define CONFIG_SYS_HZ 1000 - /* Universal has 2 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 0feef1e..44d43ba 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -584,7 +584,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

#define CONFIG_SYS_ALT_MEMTEST /* Select full-featured memory test */ #define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 76fa500..dc6434d 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -20,7 +20,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 4027030..e873568 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -66,8 +66,6 @@ #define CONFIG_ENV_SIZE 8192 #define CONFIG_ENV_IS_NOWHERE

-#define CONFIG_SYS_HZ 1000 - /* Memory things - we don't really want a memory test */ #define CONFIG_SYS_LOAD_ADDR 0x00000000 #define CONFIG_SYS_MEMTEST_START 0x00100000 diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 4ba2242..1b07da4 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -26,7 +26,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_ARCH_CPU_INIT

diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 072f97e..cfa083c 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -146,8 +146,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */

#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 6f912ed..593f178 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -451,7 +451,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 84be524..e82e4b1 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -566,7 +566,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index cf97db9..cda40d2 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -507,7 +507,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/sc3.h b/include/configs/sc3.h index a96ffbc..9a5bea3 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -224,8 +224,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * IIC stuff *----------------------------------------------------------------------- diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index fb4dc6f..af70aa8 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -133,5 +133,4 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 48000000 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __SH7752EVB_H */ diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index af76f49..a3c7f25 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -141,5 +141,4 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 48000000 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __SH7757LCR_H */ diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index c1d33d8..f471b93 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -99,7 +99,6 @@ /* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666 #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000

/* Ether */ #define CONFIG_SH_ETHER 1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 04f1d22..4b6680e 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -173,6 +173,5 @@ /* The SCIF used external clock. system clock only used timer. */ #define CONFIG_SYS_CLK_FREQ 50000000 #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

#endif /* __SH7785LCR_H */ diff --git a/include/configs/shmin.h b/include/configs/shmin.h index 5fb7176..c4fd3cb 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -104,7 +104,6 @@ #define CONFIG_SYS_CLK_FREQ 33333333 #endif /* CONFIG_T_SH7706LSR */ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000

/* Network device */ #define CONFIG_DRIVER_NE2000 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5426ee8..9eb0a04 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -85,7 +85,6 @@ + (8 * 1024 * 1024))

#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */

#define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -113,7 +112,6 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* NS16550 Configuration */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index b787270..a87444e 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -124,8 +124,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x30800000

-#define CONFIG_SYS_HZ 1000 - /* support additional compression methods */ #define CONFIG_BZIP2 #define CONFIG_LZO diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 507a5d3..c9a2e15 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -166,8 +166,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000) #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE

-#define CONFIG_SYS_HZ 1000 - /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 0496661..e2e8efe 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -101,8 +101,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)

-#define CONFIG_SYS_HZ 1000 - /* SMDKV310 has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 17eb5f2..988b680 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -20,7 +20,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000

/* CPU */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/snowball.h b/include/configs/snowball.h index edc426a..00d6fa5 100644 --- a/include/configs/snowball.h +++ b/include/configs/snowball.h @@ -27,7 +27,6 @@

#define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF -#define CONFIG_SYS_HZ 1000 /* must be 1000 */

/*----------------------------------------------------------------------- * Size of environment and malloc() pool diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 06aeba6..33f0924 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -195,7 +195,6 @@ /* reload value when timer count to zero */ #define TIMER_LOAD_VAL 0xFFFFFFFF /* Timer info */ -#define CONFIG_SYS_HZ 1000 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET #define CONFIG_TIMER_CLOCK_KHZ 2400 #else diff --git a/include/configs/socrates.h b/include/configs/socrates.h index e73f9c1..143b7ad 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -354,7 +354,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 564f364..bf9f442 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -110,8 +110,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x00100000

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 }

/* diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index c11c2b4..23f7ad7 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -47,7 +47,6 @@ #define CONFIG_I2C_CHIPADDRESS 0x50

/* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ 1000

/* Flash configuration */ #if defined(CONFIG_FLASH_PNOR) diff --git a/include/configs/spieval.h b/include/configs/spieval.h index e91f5ae..1a5d0ba 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -402,8 +402,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h index a997331..7d6f62b 100644 --- a/include/configs/stamp9g20.h +++ b/include/configs/stamp9g20.h @@ -35,7 +35,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* 1ms resolution */

/* misc settings */ #define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index c7689a7..f742940 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -331,7 +331,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index f5f7f54..10c0113 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -366,7 +366,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index ead6745..4e3b727 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -132,8 +132,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index a6c1f99..fdb38bf 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -159,8 +159,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 3e82fc2..422e74b 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -293,7 +293,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/

/* * For booting Linux, the board info and command line data diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 60dd8ff..683bc54 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -169,7 +169,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* * Physical Memory Map diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h index a1b7720..c94f436 100644 --- a/include/configs/tb0229.h +++ b/include/configs/tb0229.h @@ -109,8 +109,6 @@

#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4)

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000

#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index ba6c6bb..fc49acb 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -109,8 +109,6 @@ #define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)

-#define CONFIG_SYS_HZ 1000 - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 2fc2c10..ba16b1c 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -122,7 +122,6 @@ + PHYS_DRAM_1_SIZE - (8 << 12))

#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */

#define CONFIG_OMAP_GPIO #define CONFIG_MMC @@ -149,7 +148,6 @@ */ #define CONFIG_SYS_TIMERBASE 0x4802E000 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* NS16550 Configuration */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index e90490c..b8c0d54 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -60,7 +60,6 @@

#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */

#define CONFIG_CMD_ASKEN #define CONFIG_CMD_ECHO diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index e89e874..de83f7a 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -56,7 +56,6 @@

/* Timer information. */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */

/* I2C IP block */ #define CONFIG_I2C diff --git a/include/configs/titanium.h b/include/configs/titanium.h index 077e25e..bfb06a7 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -194,7 +194,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 27efa69..48fcb24 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -30,7 +30,6 @@

#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) -#define CONFIG_SYS_HZ 1000

#define CONFIG_PLL_SYS_EXT_FREQ 25000000 #define CONFIG_PLL_TDM_EXT_FREQ 19200000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index f841ba8..32f6b00 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -40,7 +40,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_ARCH_CPU_INIT #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/top9000.h b/include/configs/top9000.h index 65dabde..bf341d8 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -51,7 +51,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000

/* Misc CPU related */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/trats.h b/include/configs/trats.h index 24ea06b..f67ae57 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -218,8 +218,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)

-#define CONFIG_SYS_HZ 1000 - /* TRATS has 4 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index a9b2714..c72aff7 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -227,7 +227,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000

/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index c7c6952..00b0f3f 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -150,7 +150,6 @@

#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */

#ifdef CONFIG_MMC diff --git a/include/configs/tt01.h b/include/configs/tt01.h index a755d52..8f766a5 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -239,8 +239,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

-#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING

/* MMC boot support */ diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 93dd3c5..2d7479b 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -15,7 +15,6 @@ */ #define CONFIG_MX25 #define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000

#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */

diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 0c97ab1..45d33a6 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -16,7 +16,6 @@

#define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF -#define CONFIG_SYS_HZ 1000 /* must be 1000 */

#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 8bf7353..b7ac3b5 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -161,8 +161,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */

/* diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index bf04445..1c6e657 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -209,7 +209,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" *------------------------------------------------------------------*/

#define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000

/*#define CONFIG_SYS_ETH_DEV_FN 0x7800 */ /*#define CONFIG_SYS_ETH_IOBASE 0x00104000 */ diff --git a/include/configs/v37.h b/include/configs/v37.h index 0fa55d6..4107747 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -125,8 +125,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 501010e..1465fc8 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -259,8 +259,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 85a6c11..9983116 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -28,7 +28,6 @@ #define CONFIG_MIPS32 /* MIPS 4Kc CPU core */ #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) -#define CONFIG_SYS_HZ 1000

#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */

diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index a4b4732..438524b 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -351,7 +351,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */ -#define CONFIG_SYS_HZ 1000 /* 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 75a4500..5b0721c 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -117,7 +117,6 @@

#define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END 0x20000000 -#define CONFIG_SYS_HZ 1000

#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 5a7a066..82db0bf 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -184,7 +184,6 @@ #define CONFIG_SYS_MEMTEST_END 0x87C00000

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

/* * Stack sizes diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index cf88d68..cec0724 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -139,8 +139,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/vision2.h b/include/configs/vision2.h index c24ce9c..222c61a 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -157,7 +157,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER

diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index e171ae4..4c73134 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -198,7 +198,6 @@

/* clocks */

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */

#define MHZ180 diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index b450ab5..f32471e 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -397,7 +397,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 /* max num of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */

/* * For booting Linux, the board info and command line data diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index ba92db3..ed22ac9 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -150,7 +150,6 @@ /* * Clock Configuration */ -#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 665cfc3..a683241 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -208,7 +208,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000

#define CONFIG_CMDLINE_EDITING

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 6b7e81f..e47539d 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -152,9 +152,6 @@

#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

-#define CONFIG_SYS_HZ 1000 - - /* * Stack sizes * diff --git a/include/configs/x600.h b/include/configs/x600.h index 89cd501..39540e3 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -20,7 +20,6 @@ #include <asm/arch/hardware.h>

/* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_HZ_CLOCK 8300000

#define CONFIG_SYS_TEXT_BASE 0x00800040 diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 28c84db..5aff700 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -116,7 +116,6 @@

#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */

-#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */

/* diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index f4f42c5..0ccd73a 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -64,7 +64,6 @@ /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index ea27050..77f1cf2 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -214,7 +214,6 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 97ce3eb..159f2be 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -561,7 +561,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 372135a..caf5fe1 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -342,7 +342,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 31330ea..267b740 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -416,7 +416,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 340d4be..c03301e 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -401,7 +401,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 386f9de..b4b8061 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -138,8 +138,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */

-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 765b849..2e7f145 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -12,7 +12,6 @@

#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX25 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0xA0000000

#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25 diff --git a/include/configs/zynq.h b/include/configs/zynq.h index b9f381f..4c6e6e8 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -12,7 +12,6 @@

/* CPU clock */ #define CONFIG_CPU_FREQ_HZ 800000000 -#define CONFIG_SYS_HZ 1000

/* Ram */ #define CONFIG_NR_DRAM_BANKS 1