On 3/5/24 12:02, Venkatesh Yadav Abbarapu wrote:

USB4 has been added to the boot targets and also add support to enable JTAG.

Signed-off-by: Shubhangi Shrikrushna Mahalle shubhangi.shrikrushna-mahalle@amd.com Signed-off-by: Venkatesh Yadav Abbarapu venkatesh.abbarapu@amd.com

---

board/xilinx/zynqmp/zynqmp_kria.env | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env index 0f940bd68f..7d3ad31226 100644 --- a/board/xilinx/zynqmp/zynqmp_kria.env +++ b/board/xilinx/zynqmp/zynqmp_kria.env @@ -44,7 +44,8 @@ usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boo preboot=setenv boot_targets; setenv modeboot; run board_setup

# SOM specific boot methods -som_cc_boot=if test ${card1_name} = SCK-KV-G; then setenv boot_targets mmc1 usb0 usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; elif test ${card1_name} = SCK-KR-G; then setenv boot_targets usb0 usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; else test ${card1_name} = SCK-KD-G; setenv boot_targets usb0 usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; fi;" +usb_boot_devices='usb0 usb1 usb2 usb3 usb4' +som_cc_boot=if test ${card1_name} = SCK-KV-G; then setenv boot_targets mmc1 ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; elif test ${card1_name} = SCK-KR-G; then setenv boot_targets ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; else test ${card1_name} = SCK-KD-G; setenv boot_targets ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; fi;" som_mmc_boot=setenv boot_targets mmc0 && run distro_bootcmd

k26_starter=SMK-K26-XCL2G

Applied. M