[U-Boot] [PATCH 1/3] wandboard: Replace is_cpu_type() for macro
It's not necessary to use the is_cpu_type function, there is a macro in sys_proto.h already implemented.
Signed-off-by: Breno Lima breno.lima@nxp.com --- board/wandboard/wandboard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 8340dd1..d7c1142 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -390,7 +390,7 @@ int board_late_init(void) #endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) + if (is_mx6dq()) setenv("board_rev", "MX6Q"); else setenv("board_rev", "MX6DL"); @@ -409,7 +409,7 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info); - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) + if (is_mx6dq()) setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info); else setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
On Fri, Jul 22, 2016 at 9:11 AM, Breno Lima breno.lima@nxp.com wrote:
It's not necessary to use the is_cpu_type function, there is a macro in sys_proto.h already implemented.
Signed-off-by: Breno Lima breno.lima@nxp.com
Reviewed-by: Fabio Estevam fabio.estevam@nxp.com
On 22/07/2016 14:11, Breno Lima wrote:
It's not necessary to use the is_cpu_type function, there is a macro in sys_proto.h already implemented.
Signed-off-by: Breno Lima breno.lima@nxp.com
board/wandboard/wandboard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 8340dd1..d7c1142 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -390,7 +390,7 @@ int board_late_init(void) #endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
- if (is_mx6dq()) setenv("board_rev", "MX6Q"); else setenv("board_rev", "MX6DL");
@@ -409,7 +409,7 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
- if (is_mx6dq()) setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info); else setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
Applied to u-boot-imx, thanks !
Best regards, Stefano Babic
participants (3)
-
Breno Lima -
Fabio Estevam -
Stefano Babic