The variable "cmp_str" always leaves me wondering if it is the DT name of the current board (yes) or DT name in the FIT config entry (no).

In preparation for expanding the functionality here, rename it to something that obviously means "this is the DT name we are looking for".

Signed-off-by: Samuel Holland samuel@sholland.org --- board/sunxi/board.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 71e2b758a3e..674e6816d2d 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -892,14 +892,14 @@ int ft_board_setup(void *blob, struct bd_info *bd) int board_fit_config_name_match(const char *name) { struct boot_file_head *spl = get_spl_header(SPL_DT_HEADER_VERSION); - const char *cmp_str = (const char *)spl; + const char *best_dt_name = (const char *)spl;

/* Check if there is a DT name stored in the SPL header and use that. */ if (spl != INVALID_SPL_HEADER && spl->dt_name_offset) { - cmp_str += spl->dt_name_offset; + best_dt_name += spl->dt_name_offset; } else { #ifdef CONFIG_DEFAULT_DEVICE_TREE - cmp_str = CONFIG_DEFAULT_DEVICE_TREE; + best_dt_name = CONFIG_DEFAULT_DEVICE_TREE; #else return 0; #endif @@ -907,15 +907,15 @@ int board_fit_config_name_match(const char *name)

#ifdef CONFIG_PINE64_DT_SELECTION /* Differentiate the two Pine64 board DTs by their DRAM size. */ - if (strstr(name, "-pine64") && strstr(cmp_str, "-pine64")) { + if (strstr(name, "-pine64") && strstr(best_dt_name, "-pine64")) { if ((gd->ram_size > 512 * 1024 * 1024)) return !strstr(name, "plus"); else return !!strstr(name, "plus"); } else { - return strcmp(name, cmp_str); + return strcmp(name, best_dt_name); } #endif - return strcmp(name, cmp_str); + return strcmp(name, best_dt_name); } #endif

This moves the validity checking and typecasts all to one place away from the string comparison logic, and it detangles the compile-time and runtime control flow.

The new helper will also be used by U-Boot proper in a future commit.

Signed-off-by: Samuel Holland samuel@sholland.org --- board/sunxi/board.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 674e6816d2d..5c9b811f27a 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -319,6 +319,17 @@ static struct boot_file_head * get_spl_header(uint8_t req_version) return spl; }

+static const char *get_spl_dt_name(void) +{ + struct boot_file_head *spl = get_spl_header(SPL_DT_HEADER_VERSION); + + /* Check if there is a DT name stored in the SPL header. */ + if (spl != INVALID_SPL_HEADER && spl->dt_name_offset) + return (char *)spl + spl->dt_name_offset; + + return NULL; +} + int dram_init(void) { struct boot_file_head *spl = get_spl_header(SPL_DRAM_HEADER_VERSION); @@ -891,20 +902,17 @@ int ft_board_setup(void *blob, struct bd_info *bd) #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { - struct boot_file_head *spl = get_spl_header(SPL_DT_HEADER_VERSION); - const char *best_dt_name = (const char *)spl; + const char *best_dt_name = get_spl_dt_name();

- /* Check if there is a DT name stored in the SPL header and use that. */ - if (spl != INVALID_SPL_HEADER && spl->dt_name_offset) { - best_dt_name += spl->dt_name_offset; - } else { #ifdef CONFIG_DEFAULT_DEVICE_TREE + if (best_dt_name == NULL) best_dt_name = CONFIG_DEFAULT_DEVICE_TREE; -#else - return 0; #endif - };

+ if (best_dt_name == NULL) { + /* No DT name was provided, so accept the first config. */ + return 0; + } #ifdef CONFIG_PINE64_DT_SELECTION /* Differentiate the two Pine64 board DTs by their DRAM size. */ if (strstr(name, "-pine64") && strstr(best_dt_name, "-pine64")) {

Instead of using an entirely separate matching algorithm, simply update the name of the DT we want to match. Enabling this logic does not depend on the FIT config name, only on the initial guess of the board name.

Importantly, the initial guess must be "sun50i-a64-pine64-plus", because otherwise the logic would trigger when "sun50i-a64-pine64-lts" was written to the SPL header.

Signed-off-by: Samuel Holland samuel@sholland.org --- board/sunxi/board.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 5c9b811f27a..fb0d5bf4743 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -914,14 +914,10 @@ int board_fit_config_name_match(const char *name) return 0; } #ifdef CONFIG_PINE64_DT_SELECTION -/* Differentiate the two Pine64 board DTs by their DRAM size. */ - if (strstr(name, "-pine64") && strstr(best_dt_name, "-pine64")) { - if ((gd->ram_size > 512 * 1024 * 1024)) - return !strstr(name, "plus"); - else - return !!strstr(name, "plus"); - } else { - return strcmp(name, best_dt_name); + else if (strstr(best_dt_name, "-pine64-plus")) { + /* Differentiate the Pine A64 boards by their DRAM size. */ + if ((gd->ram_size == 512 * 1024 * 1024)) + best_dt_name = "sun50i-a64-pine64"; } #endif return strcmp(name, best_dt_name);

There are two different publicly-released revisions of the PinePhone hardware, versions 1.1 and 1.2; and they need different device trees. Since some GPIO pins were rerouted, we can use that to distinguish between them.

Signed-off-by: Samuel Holland samuel@sholland.org --- arch/arm/mach-sunxi/Kconfig | 7 +++++++ board/sunxi/board.c | 21 +++++++++++++++++++++ 2 files changed, 28 insertions(+)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index be0822bfb7d..8421f3b6854 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1010,4 +1010,11 @@ config PINE64_DT_SELECTION option, the device tree selection code specific to Pine64 which utilizes the DRAM size will be enabled.

+config PINEPHONE_DT_SELECTION + bool "Enable PinePhone device tree selection code" + depends on MACH_SUN50I + help + Enable this option to automatically select the device tree for the + correct PinePhone hardware revision during boot. + endif diff --git a/board/sunxi/board.c b/board/sunxi/board.c index fb0d5bf4743..3d64ed18664 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -27,6 +27,7 @@ #include <asm/arch/dram.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/prcm.h> #include <asm/arch/spl.h> #include <linux/delay.h> #include <u-boot/crc.h> @@ -920,6 +921,26 @@ int board_fit_config_name_match(const char *name) best_dt_name = "sun50i-a64-pine64"; } #endif +#ifdef CONFIG_PINEPHONE_DT_SELECTION + else if (strstr(best_dt_name, "-pinephone")) { + /* Differentiate the PinePhone revisions by GPIO inputs. */ + prcm_apb0_enable(PRCM_APB0_GATE_PIO); + sunxi_gpio_set_pull(SUNXI_GPL(6), SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_cfgpin(SUNXI_GPL(6), SUNXI_GPIO_INPUT); + udelay(100); + + /* PL6 is pulled low by the modem on v1.2. */ + if (gpio_get_value(SUNXI_GPL(6)) == 0) + best_dt_name = "sun50i-a64-pinephone-1.2"; + else + best_dt_name = "sun50i-a64-pinephone-1.1"; + + sunxi_gpio_set_cfgpin(SUNXI_GPL(6), SUNXI_GPIO_DISABLE); + sunxi_gpio_set_pull(SUNXI_GPL(6), SUNXI_GPIO_PULL_DISABLE); + prcm_apb0_disable(PRCM_APB0_GATE_PIO); + } +#endif + return strcmp(name, best_dt_name); } #endif

This overwrites the name loaded from the SPL image. It will be different if there was previously no name provided, or if a more accurate name was determined by the board variant selection logic. This means that the DT name in the SPL header now always matches the DT appended to U-Boot.

Signed-off-by: Samuel Holland samuel@sholland.org --- board/sunxi/board.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 3d64ed18664..eaa40a1ea96 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -331,6 +331,21 @@ static const char *get_spl_dt_name(void) return NULL; }

+static void set_spl_dt_name(const char *name) +{ + struct boot_file_head *spl = get_spl_header(SPL_ENV_HEADER_VERSION); + + if (spl == INVALID_SPL_HEADER) + return; + + /* Promote the header version for U-Boot proper, if needed. */ + if (spl->spl_signature[3] < SPL_DT_HEADER_VERSION) + spl->spl_signature[3] = SPL_DT_HEADER_VERSION; + + strcpy((char *)&spl->string_pool, name); + spl->dt_name_offset = offsetof(struct boot_file_head, string_pool); +} + int dram_init(void) { struct boot_file_head *spl = get_spl_header(SPL_DRAM_HEADER_VERSION); @@ -904,6 +919,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) int board_fit_config_name_match(const char *name) { const char *best_dt_name = get_spl_dt_name(); + int ret;

#ifdef CONFIG_DEFAULT_DEVICE_TREE if (best_dt_name == NULL) @@ -941,6 +957,15 @@ int board_fit_config_name_match(const char *name) } #endif

- return strcmp(name, best_dt_name); + ret = strcmp(name, best_dt_name); + + /* + * If one of the FIT configurations matches the most accurate DT name, + * update the SPL header to provide that DT name to U-Boot proper. + */ + if (ret == 0) + set_spl_dt_name(best_dt_name); + + return ret; } #endif

Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE. This meant that, regardless of the DT chosen by SPL (either by changing the header in the image or by the selection code at runtime), Linux always used the default DT.

By using the name from the SPL header (which, because of the previous commit, always matches the DT used by U-Boot proper), Linux also sees the same board as U-Boot/SPL, even if the boot script later loads a DT from disk.

Signed-off-by: Samuel Holland samuel@sholland.org --- board/sunxi/board.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c index eaa40a1ea96..5457b28e135 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -870,6 +870,7 @@ static void setup_environment(const void *fdt)

int misc_init_r(void) { + const char *spl_dt_name; uint boot;

env_set("fel_booted", NULL); @@ -888,6 +889,16 @@ int misc_init_r(void) env_set("mmc_bootdev", "1"); }

+ /* Set fdtfile to match the FIT configuration chosen in SPL. */ + spl_dt_name = get_spl_dt_name(); + if (spl_dt_name) { + char *prefix = IS_ENABLED(CONFIG_ARM64) ? "allwinner/" : ""; + char str[64]; + + snprintf(str, sizeof(str), "%s%s.dtb", prefix, spl_dt_name); + env_set("fdtfile", str); + } + setup_environment(gd->fdt_blob);

#ifdef CONFIG_USB_ETHER

Import updated device trees from Linux v5.9-rc3. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream.

A couple of headers needed updates for recently-added hardware support.

Signed-off-by: Samuel Holland samuel@sholland.org --- arch/arm/dts/Makefile | 4 + arch/arm/dts/axp803.dtsi | 82 +-- arch/arm/dts/sun50i-a64-amarula-relic.dts | 109 +++- arch/arm/dts/sun50i-a64-bananapi-m64.dts | 118 ++-- arch/arm/dts/sun50i-a64-cpu-opp.dtsi | 75 +++ arch/arm/dts/sun50i-a64-nanopi-a64.dts | 70 +-- .../dts/sun50i-a64-oceanic-5205-5inmfd.dts | 31 +- arch/arm/dts/sun50i-a64-olinuxino-emmc.dts | 12 +- arch/arm/dts/sun50i-a64-olinuxino.dts | 113 ++-- arch/arm/dts/sun50i-a64-orangepi-win.dts | 127 +++-- arch/arm/dts/sun50i-a64-pine64-lts.dts | 7 +- arch/arm/dts/sun50i-a64-pine64-plus.dts | 52 +- arch/arm/dts/sun50i-a64-pine64.dts | 97 ++-- arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 17 - arch/arm/dts/sun50i-a64-pinebook.dts | 237 ++++++-- arch/arm/dts/sun50i-a64-pinephone-1.0.dts | 11 + arch/arm/dts/sun50i-a64-pinephone-1.1.dts | 30 + arch/arm/dts/sun50i-a64-pinephone-1.2.dts | 40 ++ arch/arm/dts/sun50i-a64-pinephone.dtsi | 429 ++++++++++++++ arch/arm/dts/sun50i-a64-pinetab.dts | 460 +++++++++++++++ arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 113 ++-- arch/arm/dts/sun50i-a64-sopine.dtsi | 69 +-- arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi | 41 -- arch/arm/dts/sun50i-a64-teres-i.dts | 138 ++++- arch/arm/dts/sun50i-a64.dtsi | 532 ++++++++++++++---- include/dt-bindings/clock/sun50i-a64-ccu.h | 4 +- include/dt-bindings/clock/sun8i-de2.h | 3 + include/dt-bindings/reset/sun8i-de2.h | 1 + 28 files changed, 2390 insertions(+), 632 deletions(-) create mode 100644 arch/arm/dts/sun50i-a64-cpu-opp.dtsi delete mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1.0.dts create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1.1.dts create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1.2.dts create mode 100644 arch/arm/dts/sun50i-a64-pinephone.dtsi create mode 100644 arch/arm/dts/sun50i-a64-pinetab.dts delete mode 100644 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f8f529435bf..57ef94450a1 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -608,6 +608,10 @@ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-pine64-plus.dtb \ sun50i-a64-pine64.dtb \ sun50i-a64-pinebook.dtb \ + sun50i-a64-pinephone-1.0.dtb \ + sun50i-a64-pinephone-1.1.dtb \ + sun50i-a64-pinephone-1.2.dtb \ + sun50i-a64-pinetab.dtb \ sun50i-a64-sopine-baseboard.dtb \ sun50i-a64-teres-i.dtb dtb-$(CONFIG_MACH_SUN9I) += \ diff --git a/arch/arm/dts/axp803.dtsi b/arch/arm/dts/axp803.dtsi index e5eae8bafc4..10e9186a76b 100644 --- a/arch/arm/dts/axp803.dtsi +++ b/arch/arm/dts/axp803.dtsi @@ -1,44 +1,5 @@ -/* - * Copyright 2017 Icenowy Zheng icenowy@aosc.xyz - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright 2017 Icenowy Zheng icenowy@aosc.xyz

/* * AXP803 Integrated Power Management Chip @@ -49,6 +10,39 @@ interrupt-controller; #interrupt-cells = <1>;

+ ac_power_supply: ac-power-supply { + compatible = "x-powers,axp803-ac-power-supply", + "x-powers,axp813-ac-power-supply"; + status = "disabled"; + }; + + axp_adc: adc { + compatible = "x-powers,axp803-adc", "x-powers,axp813-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio"; + gpio-controller; + #gpio-cells = <2>; + + gpio0_ldo: gpio0-ldo { + pins = "GPIO0"; + function = "ldo"; + }; + + gpio1_ldo: gpio1-ldo { + pins = "GPIO1"; + function = "ldo"; + }; + }; + + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp803-battery-power-supply", + "x-powers,axp813-battery-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; @@ -152,4 +146,10 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp803-usb-power-supply", + "x-powers,axp813-usb-power-supply"; + status = "disabled"; + }; }; diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts b/arch/arm/dts/sun50i-a64-amarula-relic.dts index 6cb2b7f0c81..c7bd73f35ed 100644 --- a/arch/arm/dts/sun50i-a64-amarula-relic.dts +++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts @@ -1,12 +1,11 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 Amarula Solutions B.V. - * Author: Jagan Teki jagan@amarulasolutions.com - */ +// Copyright (C) 2018 Amarula Solutions B.V. +// Author: Jagan Teki jagan@amarulasolutions.com

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -22,6 +21,41 @@ stdout-path = "serial0:115200n8"; };

+ i2c { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <&reg_aldo1>; + DOVDD-supply = <&reg_dldo3>; + DVDD-supply = <&reg_eldo3>; + reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */ + powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc 1>; @@ -30,10 +64,70 @@ }; };

+&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&csi { + status = "okay"; + + port { + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + &ehci0 { status = "okay"; };

+&i2c0 { + status = "okay"; + + sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + }; +}; + +&i2c0_pins { + bias-pull-up; +}; + +&i2c1 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt5663"; + reg = <0x5d>; + AVDD28-supply = <&reg_ldo_io0>; /* VCC-CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -197,6 +291,13 @@ regulator-name = "vdd-cpus"; };

+&reg_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + &reg_rtc_ldo { regulator-name = "vcc-rtc"; }; diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts index ef1c90401bb..883f217efb8 100644 --- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts +++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd.

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -94,9 +56,40 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; };

+&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -130,8 +123,6 @@ };

&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; };

@@ -207,6 +198,14 @@

#include "axp803.dtsi"

+&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &reg_aldo1 { /* * This regulator also drives the PE pingroup GPIOs, @@ -326,6 +325,22 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; @@ -335,7 +350,19 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <&reg_dldo2>; + vddio-supply = <&reg_dldo4>; + device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; };

&usb_otg { @@ -343,8 +370,13 @@ status = "okay"; };

+&usb_power_supply { + status = "okay"; +}; + &usbphy { usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <&reg_drivevbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-cpu-opp.dtsi b/arch/arm/dts/sun50i-a64-cpu-opp.dtsi new file mode 100644 index 00000000000..578c37490d9 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-cpu-opp.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Vasily khoruzhick anarsoul@gmail.com + */ + +/ { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1120000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1160000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <1240000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1260000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu0_opp_table>; +}; diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts index 31884dbc883..e58db8a6cab 100644 --- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts +++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (C) 2017 Jagan Teki jteki@openedev.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki jteki@openedev.com

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -87,6 +49,22 @@ }; };

+&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + &de { status = "okay"; }; @@ -120,12 +98,6 @@ };

/* i2c1 connected with gpio headers like pine64, bananapi */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; -}; - &i2c1_pins { bias-pull-up; }; @@ -186,6 +158,10 @@

#include "axp803.dtsi"

+&ac_power_supply { + status = "okay"; +}; + &reg_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts index 6a2154525d1..577f9e1d08a 100644 --- a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts +++ b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts @@ -1,9 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2019 Oceanic Systems (UK) Ltd. - * Copyright (C) 2019 Amarula Solutions B.V. - * Author: Jagan Teki jagan@amarulasolutions.com - */ +// Copyright (C) 2019 Oceanic Systems (UK) Ltd. +// Copyright (C) 2019 Amarula Solutions B.V. +// Author: Jagan Teki jagan@amarulasolutions.com

/dts-v1/;

@@ -37,6 +35,22 @@ status = "okay"; };

+&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + AVDD28-supply = <&reg_ldo_io0>; /* VDD_CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH11 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -52,6 +66,13 @@ regulator-name = "vcc-phy"; };

+&reg_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-ctp"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts b/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts index 96ab0227e82..efb20846de4 100644 --- a/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts +++ b/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts @@ -1,8 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 Martin Ayotte martinayotte@gmail.com - * Copyright (C) 2019 Sunil Mohan Adapa sunil@medhas.org - */ +// Copyright (C) 2018 Martin Ayotte martinayotte@gmail.com +// Copyright (C) 2019 Sunil Mohan Adapa sunil@medhas.org

#include "sun50i-a64-olinuxino.dts"

@@ -15,9 +13,13 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&reg_dcdc1>; - vqmmc-supply = <&reg_dcdc1>; + vqmmc-supply = <&reg_eldo1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; status = "okay"; }; + +&pio { + vcc-pc-supply = <&reg_eldo1>; +}; diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts index f7a4bccaa5d..f3f8e177ab6 100644 --- a/arch/arm/dts/sun50i-a64-olinuxino.dts +++ b/arch/arm/dts/sun50i-a64-olinuxino.dts @@ -1,48 +1,10 @@ -/* - * Copyright (C) 2017 Jagan Teki jteki@openedev.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki jteki@openedev.com

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -70,6 +32,15 @@ }; };

+ leds { + compatible = "gpio-leds"; + + led-0 { + label = "a64-olinuxino:red:user"; + gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + }; + }; + reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; regulator-name = "usb1-vbus"; @@ -87,6 +58,22 @@ }; };

+&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + &de { status = "okay"; }; @@ -140,7 +127,7 @@ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <&reg_aldo2>; + vmmc-supply = <&reg_dcdc1>; vqmmc-supply = <&reg_dldo4>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -163,6 +150,34 @@ status = "okay"; };

+&pio { + vcc-pc-supply = <&reg_dcdc1>; + vcc-pd-supply = <&reg_dcdc1>; + vcc-pe-supply = <&reg_aldo1>; + vcc-pg-supply = <&reg_dldo4>; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <&reg_aldo2>; + */ +}; + +&pio { + vcc-pa-supply = <&reg_dcdc1>; + vcc-pb-supply = <&reg_dcdc1>; + vcc-pc-supply = <&reg_dcdc1>; + vcc-pd-supply = <&reg_dcdc1>; + vcc-pe-supply = <&reg_aldo1>; + vcc-pf-supply = <&reg_dcdc1>; + vcc-pg-supply = <&reg_dldo4>; + vcc-ph-supply = <&reg_dcdc1>; +}; + &r_rsb { status = "okay";

@@ -175,8 +190,22 @@ }; };

+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */ +/* interface used to talk to the PMIC in on the PL pins */ +/* &r_pio { */ +/* vcc-pl-supply = <&reg_aldo2>; */ +/* }; */ + #include "axp803.dtsi"

+&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &reg_aldo1 { regulator-always-on; regulator-min-microvolt = <2800000>; diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts index b0c64f75792..fde9c7a99b1 100644 --- a/arch/arm/dts/sun50i-a64-orangepi-win.dts +++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts @@ -1,49 +1,11 @@ -/* - * Copyright (C) 2017 Jagan Teki jteki@openedev.com - * Copyright (C) 2017-2018 Samuel Holland samuel@sholland.org - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki jteki@openedev.com +// Copyright (C) 2017-2018 Samuel Holland samuel@sholland.org

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -109,9 +71,40 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; };

+&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -170,6 +163,14 @@ bus-width = <4>; non-removable; status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; };

&ohci0 { @@ -180,6 +181,10 @@ status = "okay"; };

+&r_ir { + status = "okay"; +}; + &r_rsb { status = "okay";

@@ -188,11 +193,20 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; };

#include "axp803.dtsi"

+&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &reg_aldo1 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -310,6 +324,22 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &spi0 { status = "okay";

@@ -333,7 +363,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <&reg_dldo2>; + vddio-supply = <&reg_dldo4>; + device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; };

/* On Pi-2 connector, RTS/CTS optional */ diff --git a/arch/arm/dts/sun50i-a64-pine64-lts.dts b/arch/arm/dts/sun50i-a64-pine64-lts.dts index 72d6961dc31..302e24be0a3 100644 --- a/arch/arm/dts/sun50i-a64-pine64-lts.dts +++ b/arch/arm/dts/sun50i-a64-pine64-lts.dts @@ -1,8 +1,5 @@ -/* - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - * - * Copyright (c) 2018 ARM Ltd. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2018 ARM Ltd.

#include "sun50i-a64-sopine-baseboard.dts"

diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts index 24f1aac366d..b26181cf909 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus.dts +++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts @@ -1,44 +1,5 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd.

#include "sun50i-a64-pine64.dts"

@@ -63,3 +24,12 @@ reg = <1>; }; }; + +&reg_dc1sw { + /* + * Ethernet PHY needs 30ms to properly power up and some more + * to initialize. 100ms should be plenty of time to finish + * whole process. + */ + regulator-enable-ramp-delay = <100000>; +}; diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts index c077b6c1f45..2165f238af1 100644 --- a/arch/arm/dts/sun50i-a64-pine64.dts +++ b/arch/arm/dts/sun50i-a64-pine64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd.

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

@@ -75,6 +37,35 @@ }; };

+&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -109,8 +100,6 @@ };

&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; };

@@ -156,6 +145,14 @@

#include "axp803.dtsi"

+&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &reg_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -259,6 +256,20 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "MIC2", "Microphone Jack"; + status = "okay"; +}; + /* On Euler connector */ &spdif { status = "disabled"; diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi deleted file mode 100644 index 650ab97ec99..00000000000 --- a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 Vasily Khoruzhick anarsoul@gmail.com - * - */ - -#include "sunxi-u-boot.dtsi" - -/* The ANX6345 eDP-bridge is on r_i2c */ -&r_i2c { - anx6345: edp-bridge@38 { - compatible = "analogix,anx6345"; - reg = <0x38>; - reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ - status = "okay"; - }; -}; diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts index ec537c52972..64b1c54f87c 100644 --- a/arch/arm/dts/sun50i-a64-pinebook.dts +++ b/arch/arm/dts/sun50i-a64-pinebook.dts @@ -1,15 +1,14 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2017 Icenowy Zheng icenowy@aosc.xyz - * Copyright (C) 2018 Vasily Khoruzhick anarsoul@gmail.com - * - */ +// Copyright (C) 2017 Icenowy Zheng icenowy@aosc.xyz +// Copyright (C) 2018 Vasily Khoruzhick anarsoul@gmail.com

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h>

@@ -22,32 +21,17 @@ ethernet0 = &rtl8723cs; };

- vdd_bl: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "bl-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - enable-active-high; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 0>; brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; default-brightness-level = <2>; enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ - power-supply = <&vdd_bl>; + power-supply = <&reg_vbklt>; };

chosen { stdout-path = "serial0:115200n8"; - - framebuffer-lcd { - panel-supply = <&reg_dc1sw>; - dvdd25-supply = <&reg_dldo2>; - dvdd12-supply = <&reg_fldo1>; - }; };

gpio_keys { @@ -60,20 +44,85 @@ linux,code = <SW_LID>; linux,can-disable; wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + panel_edp: panel-edp { + compatible = "neweast,wjfh116008a"; + backlight = <&backlight>; + power-supply = <&reg_dc1sw>; + + port { + panel_edp_in: endpoint { + remote-endpoint = <&anx6345_out_edp>; + }; }; };

- reg_vcc3v3: vcc3v3 { + reg_vbklt: vbklt { compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "vbklt"; + regulator-min-microvolt = <18000000>; + regulator-max-microvolt = <18000000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; + enable-active-high; };

wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + VCC-supply = <&reg_vcc5v0>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + sound-name-prefix = "Speaker Amp"; + }; + +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; };

&ehci0 { @@ -86,11 +135,15 @@ status = "okay"; };

+&mixer0 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ disable-wp; bus-width = <4>; status = "okay"; @@ -133,10 +186,61 @@ status = "okay"; };

+&pio { + vcc-pc-supply = <&reg_eldo1>; + vcc-pd-supply = <&reg_dcdc1>; + vcc-pe-supply = <&reg_aldo1>; + vcc-pg-supply = <&reg_eldo1>; +}; + &pwm { status = "okay"; };

+&r_i2c { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pl89_pins>; + status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <&reg_dldo2>; + dvdd12-supply = <&reg_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + reg = <0>; + anx6345_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + reg = <1>; + anx6345_out_edp: endpoint { + remote-endpoint = <&panel_edp_in>; + }; + }; + }; + }; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <&reg_aldo2>; + */ +}; + &r_rsb { status = "okay";

@@ -148,20 +252,18 @@ }; };

-/* The ANX6345 eDP-bridge is on r_i2c */ -&r_i2c { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&r_i2c_pl89_pins>; +#include "axp803.dtsi" + +&ac_power_supply { status = "okay"; };

-#include "axp803.dtsi" +&battery_power_supply { + status = "okay"; +};

&reg_aldo1 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vcc-csi"; + regulator-name = "vcc-pe"; };

&reg_aldo2 { @@ -224,12 +326,6 @@ regulator-name = "vcc-edp"; };

-&reg_dldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avdd-csi"; -}; - &reg_dldo4 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -243,12 +339,6 @@ regulator-name = "cpvdd"; };

-&reg_eldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vdd-1v8-csi"; -}; - &reg_fldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -262,21 +352,56 @@ regulator-name = "vdd-cpus"; };

-&reg_ldo_io0 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-usb"; - status = "okay"; -}; - &reg_rtc_ldo { regulator-name = "vcc-rtc"; };

+&simplefb_lcd { + panel-supply = <&reg_dc1sw>; + dvdd25-supply = <&reg_dldo2>; + dvdd12-supply = <&reg_fldo1>; +}; + &simplefb_hdmi { vcc-hdmi-supply = <&reg_dldo1>; };

+&sound { + status = "okay"; + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Internal Microphone Left", + "Microphone", "Internal Microphone Right", + "Headphone", "Headphone Jack", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Internal Microphone Left", "MBIAS", + "MIC1", "Internal Microphone Left", + "Internal Microphone Right", "HBIAS", + "MIC2", "Internal Microphone Right"; +}; + +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint { + remote-endpoint = <&anx6345_in_tcon0>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; @@ -288,7 +413,7 @@ };

&usbphy { - usb0_vbus-supply = <&reg_ldo_io0>; - usb1_vbus-supply = <&reg_ldo_io0>; + usb0_vbus-supply = <&reg_vcc5v0>; + usb1_vbus-supply = <&reg_vcc5v0>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts new file mode 100644 index 00000000000..0c42272106a --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman megous@megous.com + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone Developer Batch (1.0)"; + compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64"; +}; diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts new file mode 100644 index 00000000000..3e99a87e9ce --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman megous@megous.com + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone Braveheart (1.1)"; + compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; +}; + +&backlight { + power-supply = <&reg_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since + * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight + * being off is around 20%. Duty cycle for the lowest brightness level + * also varries quite a bit between individual boards, so the lowest + * value here was chosen as a safe default. + */ + brightness-levels = < + 774 793 814 842 + 882 935 1003 1088 + 1192 1316 1462 1633 + 1830 2054 2309 2596 + 2916 3271 3664 4096>; + num-interpolated-steps = <50>; + default-brightness-level = <400>; +}; diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.2.dts b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts new file mode 100644 index 00000000000..a9f5b670c9b --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman megous@megous.com + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone (1.2)"; + compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; +}; + +&backlight { + power-supply = <&reg_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since 1.0, + * and the lowest PWM duty cycle that doesn't lead to backlight being off + * is around 10%. Duty cycle for the lowest brightness level also varries + * quite a bit between individual boards, so the lowest value here was + * chosen as a safe default. + */ + brightness-levels = < + 5000 5248 5506 5858 6345 + 6987 7805 8823 10062 11543 + 13287 15317 17654 20319 23336 + 26724 30505 34702 39335 44427 + 50000 + >; + num-interpolated-steps = <50>; + default-brightness-level = <500>; +}; + +&lis3mdl { + /* + * Board revision 1.2 fixed routing of the interrupt to DRDY pin, + * enable interrupts. + */ + interrupt-parent = <&pio>; + interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ +}; diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi new file mode 100644 index 00000000000..25150aba749 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Icenowy Zheng icenowy@aosc.xyz +// Copyright (C) 2020 Martijn Braam martijn@brixit.nl +// Copyright (C) 2020 Ondrej Jirman megous@megous.com + +#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart0; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + /* Backlight configuration differs per PinePhone revision. */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ + }; + + green { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ + }; + + red { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ + }; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ + sound-name-prefix = "Speaker Amp"; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ + vcc-supply = <&reg_dcdc1>; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <&reg_dldo1>; + status = "okay"; + + panel@0 { + compatible = "xingbangda,xbd599"; + reg = <0>; + reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */ + iovcc-supply = <&reg_dldo2>; + vcc-supply = <&reg_ldo_io0>; + backlight = <&backlight>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt917s"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + AVDD28-supply = <&reg_ldo_io0>; + VDDIO-supply = <&reg_ldo_io0>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + +&i2c1 { + status = "okay"; + + /* Magnetometer */ + lis3mdl: lis3mdl@1e { + compatible = "st,lis3mdl-magn"; + reg = <0x1e>; + vdd-supply = <&reg_dldo1>; + vddio-supply = <&reg_dldo1>; + }; + + /* Accelerometer/gyroscope */ + mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&pio>; + interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */ + vdd-supply = <&reg_dldo1>; + vddio-supply = <&reg_dldo1>; + }; +}; + +/* Connected to pogo pins (external spring based pinheader for user addons) */ +&i2c2 { + status = "okay"; +}; + +&lradc { + vref-supply = <&reg_aldo3>; + status = "okay"; + + button-200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&reg_dcdc1>; + vqmmc-supply = <&reg_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&reg_dcdc1>; + vqmmc-supply = <&reg_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <&reg_dcdc1>; + vcc-pc-supply = <&reg_dcdc1>; + vcc-pd-supply = <&reg_dcdc1>; + vcc-pe-supply = <&reg_aldo1>; + vcc-pf-supply = <&reg_dcdc1>; + vcc-pg-supply = <&reg_dldo4>; + vcc-ph-supply = <&reg_dcdc1>; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <&reg_aldo2>; + */ +}; + +&r_pwm { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&reg_aldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dovdd-csi"; +}; + +&reg_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pl"; +}; + +&reg_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +&reg_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +&reg_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +&reg_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +&reg_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +&reg_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-dsi-sensor"; +}; + +&reg_dldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-mipi-io"; +}; + +&reg_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +&reg_dldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-wifi-io"; +}; + +&reg_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-lpddr"; +}; + +&reg_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +&reg_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +&reg_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +&reg_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd-ctp-stk"; + status = "okay"; +}; + +&reg_ldo_io1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8-typec"; + status = "okay"; +}; + +&reg_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&sound { + status = "okay"; + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Headset Microphone", + "Microphone", "Internal Microphone", + "Headphone", "Headphone Jack", + "Speaker", "Internal Earpiece", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Headphone Jack", "HP", + "Internal Earpiece", "EARPIECE", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Internal Microphone", "MBIAS", + "MIC1", "Internal Microphone", + "Headset Microphone", "HBIAS", + "MIC2", "Headset Microphone"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +/* Connected to the modem (hardware flow control can't be used) */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts new file mode 100644 index 00000000000..dc4ab6b434f --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinetab.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Icenowy Zheng icenowy@aosc.xyz + * + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "PineTab"; + compatible = "pine64,pinetab", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + ethernet0 = &rtl8723cs; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>; + default-brightness-level = <15>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + power-supply = <&vdd_bl>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2c-csi { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */ + scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */ + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + /* Rear camera */ + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <&reg_dldo3>; + DOVDD-supply = <&reg_aldo1>; + DVDD-supply = <&reg_eldo3>; + reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */ + powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + sound-name-prefix = "Speaker Amp"; + }; + + vdd_bl: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "bl-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + post-power-on-delay-ms = <200>; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&csi { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <&reg_dldo1>; + status = "okay"; + + panel@0 { + compatible = "feixin,k101-im2ba02"; + reg = <0>; + avdd-supply = <&reg_dc1sw>; + dvdd-supply = <&reg_dc1sw>; + cvdd-supply = <&reg_ldo_io1>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + backlight = <&backlight>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + AVDD28-supply = <&reg_ldo_io1>; + }; +}; + +&i2c0_pins { + bias-pull-up; +}; + +&i2c1 { + status = "okay"; + + /* TODO: add Bochs BMA223 accelerometer here */ +}; + +&lradc { + vref-supply = <&reg_aldo3>; + status = "okay"; + + button-200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mixer1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&reg_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&reg_dldo4>; + vqmmc-supply = <&reg_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&reg_dcdc1>; + vqmmc-supply = <&reg_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&reg_aldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "dovdd-csi"; +}; + +&reg_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +&reg_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +&reg_dc1sw { + regulator-name = "vcc-lcd"; +}; + +&reg_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +&reg_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +&reg_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +&reg_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +&reg_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi-sensor"; +}; + +&reg_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +&reg_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&reg_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +&reg_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +&reg_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca-1v8"; +}; + +&reg_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +&reg_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +&reg_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +&reg_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb"; + status = "okay"; +}; + +&reg_ldo_io1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <3500000>; + regulator-name = "vcc-touchscreen"; + status = "okay"; +}; + +&reg_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&sound { + status = "okay"; + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Internal Microphone Left", + "Microphone", "Internal Microphone Right", + "Headphone", "Headphone Jack", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Internal Microphone Left", "MBIAS", + "MIC1", "Internal Microphone Left", + "Internal Microphone Right", "HBIAS", + "MIC2", "Internal Microphone Right"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <&reg_drivevbus>; + usb1_vbus-supply = <&reg_ldo_io0>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts index 53fcc9098df..2f6ea9f3f6a 100644 --- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts @@ -1,47 +1,7 @@ -/* - * Copyright (c) 2017 Icenowy Zheng icenowy@aosc.xyz - * - * Based on sun50i-a64-pine64.dts, which is: - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng icenowy@aosc.xyz +// Based on sun50i-a64-pine64.dts, which is: +// Copyright (c) 2016 ARM Ltd.

/dts-v1/;

@@ -55,6 +15,10 @@ aliases { ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; };

chosen { @@ -80,6 +44,26 @@ }; };

+&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -139,6 +123,12 @@ };

&reg_dc1sw { + /* + * Ethernet PHY needs 30ms to properly power up and some more + * to initialize. 100ms should be plenty of time to finish + * whole process. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-phy"; };

@@ -164,12 +154,47 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "MIC2", "Microphone Jack"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; };

+/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi index 6723b8695e0..c48692b06e1 100644 --- a/arch/arm/dts/sun50i-a64-sopine.dtsi +++ b/arch/arm/dts/sun50i-a64-sopine.dtsi @@ -1,52 +1,33 @@ -/* - * Copyright (c) 2017 Icenowy Zheng icenowy@aosc.xyz - * - * Based on sun50i-a64-pine64.dts, which is: - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng icenowy@aosc.xyz +// Based on sun50i-a64-pine64.dts, which is: +// Copyright (c) 2016 ARM Ltd.

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>

+&codec_analog { + cpvdd-supply = <&reg_eldo1>; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi deleted file mode 100644 index 1a64b7d09c2..00000000000 --- a/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2019 Vasily Khoruzhick anarsoul@gmail.com - * - */ - -#include "sunxi-u-boot.dtsi" - -/ { - vdd_bl: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "bl-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - enable-active-high; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 0>; - brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; - default-brightness-level = <2>; - enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ - power-supply = <&vdd_bl>; - }; -}; - -/* The ANX6345 eDP-bridge is on i2c */ -&i2c0 { - anx6345: edp-bridge@38 { - compatible = "analogix,anx6345"; - reg = <0x38>; - reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ - status = "okay"; - }; -}; - -&pwm { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts index c455b24dd07..f5df5f705b7 100644 --- a/arch/arm/dts/sun50i-a64-teres-i.dts +++ b/arch/arm/dts/sun50i-a64-teres-i.dts @@ -1,13 +1,11 @@ -/* - * Copyright (C) Harald Geyer harald@ccbib.org - * based on sun50i-a64-olinuxino.dts by Jagan Teki jteki@openedev.com - * - * SPDX-License-Identifier: (GPL-2.0 OR MIT) - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) Harald Geyer harald@ccbib.org +// based on sun50i-a64-olinuxino.dts by Jagan Teki jteki@openedev.com

/dts-v1/;

#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -21,6 +19,15 @@ serial0 = &uart0; };

+ backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 0>; + power-supply = <&reg_dcdc1>; + brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>; + default-brightness-level = <5>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + }; + chosen { stdout-path = "serial0:115200n8";

@@ -70,6 +77,45 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ + sound-name-prefix = "Speaker Amp"; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; };

&ehci1 { @@ -77,14 +123,31 @@ };

-/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) - * driver for this chip at the moment, the bootloader initializes it. - * However it can be accessed with the i2c-dev driver from user space. - */ &i2c0 { clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <&reg_dldo2>; + dvdd12-supply = <&reg_dldo3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + anx6345_in: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + }; + }; +}; + +&mixer0 { status = "okay"; };

@@ -131,6 +194,10 @@ status = "okay"; };

+&pwm { + status = "okay"; +}; + &r_rsb { status = "okay";

@@ -145,6 +212,14 @@

#include "axp803.dtsi"

+&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &reg_aldo1 { regulator-always-on; regulator-min-microvolt = <2800000>; @@ -239,7 +314,7 @@ };

/* - * The A64 chip cannot work without this regulator off, although + * The A64 chip cannot work with this regulator off, although * it seems to be only driving the AR100 core. * Maybe we don't still know well about CPUs domain. */ @@ -258,6 +333,43 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&sound { + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Headset Microphone", + "Microphone", "Internal Microphone", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Internal Microphone", "MBIAS", + "MIC1", "Internal Microphone", + "Headset Microphone", "HBIAS", + "MIC2", "Headset Microphone"; + status = "okay"; +}; + +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint@0 { + reg = <0>; + remote-endpoint = <&anx6345_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index ff41abc96a9..8dfbcd14407 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -1,46 +1,7 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * based on the Allwinner H3 dtsi: - * Copyright (C) 2015 Jens Kuske jenskuske@gmail.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. +// based on the Allwinner H3 dtsi: +// Copyright (C) 2015 Jens Kuske jenskuske@gmail.com

#include <dt-bindings/clock/sun50i-a64-ccu.h> #include <dt-bindings/clock/sun8i-de2.h> @@ -49,6 +10,7 @@ #include <dt-bindings/reset/sun50i-a64-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-r-ccu.h> +#include <dt-bindings/thermal/thermal.h>

/ { interrupt-parent = <&gic>; @@ -84,35 +46,47 @@ #size-cells = <0>;

cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; };

cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; };

cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; };

cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; };

L2: l2-cache { @@ -139,15 +113,16 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-output-names = "ext-osc32k"; };

- iosc: internal-osc-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <16000000>; - clock-accuracy = <300000000>; - clock-output-names = "iosc"; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; };

psci { @@ -155,26 +130,33 @@ method = "smc"; };

- sound_spdif { + sound: sound { compatible = "simple-audio-card"; - simple-audio-card,name = "On-board SPDIF"; + simple-audio-card,name = "sun50i-a64-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC"; + status = "disabled";

- simple-audio-card,cpu { - sound-dai = <&spdif>; + cpudai: simple-audio-card,cpu { + sound-dai = <&dai>; };

- simple-audio-card,codec { - sound-dai = <&spdif_out>; + link_codec: simple-audio-card,codec { + sound-dai = <&codec>; }; };

- spdif_out: spdif-out { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - }; - timer { compatible = "arm,armv8-timer"; + allwinner,erratum-unknown1; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 14 @@ -185,13 +167,76 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; };

+ thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + /* milliCelsius */ + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu0_thermal: gpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + + gpu1_thermal: gpu1-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges;

- de2@1000000 { + bus@1000000 { compatible = "allwinner,sun50i-a64-de2"; reg = <0x1000000 0x400000>; allwinner,sram = <&de2_sram 1>; @@ -201,16 +246,28 @@

display_clocks: clock@0 { compatible = "allwinner,sun50i-a64-de2-clk"; - reg = <0x0 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + reg = <0x0 0x10000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; };

+ rotate: rotate@20000 { + compatible = "allwinner,sun50i-a64-de2-rotate", + "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + mixer0: mixer@100000 { compatible = "allwinner,sun50i-a64-de2-mixer-0"; reg = <0x100000 0x100000>; @@ -225,11 +282,19 @@ #size-cells = <0>;

mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>;

- mixer0_out_tcon0: endpoint { + mixer0_out_tcon0: endpoint@0 { + reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -248,9 +313,17 @@ #size-cells = <0>;

mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>;

- mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -259,8 +332,7 @@ };

syscon: syscon@1c00000 { - compatible = "allwinner,sun50i-a64-system-control", - "syscon"; + compatible = "allwinner,sun50i-a64-system-control"; reg = <0x01c00000 0x1000>; #address-cells = <1>; #size-cells = <1>; @@ -278,6 +350,20 @@ reg = <0x0000 0x28000>; }; }; + + sram_c1: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x40000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-a64-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x40000>; + }; + }; };

dma: dma-controller@1c02000 { @@ -299,6 +385,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds";

@@ -315,12 +402,23 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; };

tcon0_out: port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; }; @@ -340,9 +438,17 @@ #size-cells = <0>;

tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>;

- tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; @@ -360,6 +466,17 @@ }; };

+ video-codec@1c0e000 { + compatible = "allwinner,sun50i-a64-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; @@ -405,6 +522,31 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun50i-a64-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 0x8>; + }; + }; + + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-a64-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun50i-a64-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; };

usb_otg: usb@1c19000 { @@ -417,6 +559,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; };

@@ -491,7 +634,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun50i-a64-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -503,22 +646,50 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 58>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>;

- i2c0_pins: i2c0_pins { + csi_pins: csi-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", + "PE7", "PE8", "PE9", "PE10", "PE11"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + + i2c0_pins: i2c0-pins { pins = "PH0", "PH1"; function = "i2c0"; };

- i2c1_pins: i2c1_pins { + i2c1_pins: i2c1-pins { pins = "PH2", "PH3"; function = "i2c1"; };

+ i2c2_pins: i2c2-pins { + pins = "PE14", "PE15"; + function = "i2c2"; + }; + + /omit-if-no-ref/ + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9", + "PD10", "PD11", "PD12", "PD13", + "PD14", "PD15", "PD16", "PD17", + "PD18", "PD19", "PD20", "PD21"; + function = "lcd0"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -551,19 +722,19 @@ bias-pull-up; };

- pwm_pin: pwm_pin { + pwm_pin: pwm-pin { pins = "PD22"; function = "pwm"; };

- rmii_pins: rmii_pins { + rmii_pins: rmii-pins { pins = "PD10", "PD11", "PD13", "PD14", "PD17", "PD18", "PD19", "PD20", "PD22", "PD23"; function = "emac"; drive-strength = <40>; };

- rgmii_pins: rgmii_pins { + rgmii_pins: rgmii-pins { pins = "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD15", "PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23"; @@ -571,17 +742,17 @@ drive-strength = <40>; };

- spdif_tx_pin: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PH8"; function = "spdif"; };

- spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; };

- spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PD0", "PD1", "PD2", "PD3"; function = "spi1"; }; @@ -591,12 +762,12 @@ function = "uart0"; };

- uart1_pins: uart1_pins { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; };

- uart1_rts_cts_pins: uart1_rts_cts_pins { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; @@ -638,6 +809,14 @@ status = "disabled"; };

+ lradc: lradc@1c21800 { + compatible = "allwinner,sun50i-a64-lradc", + "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01c21800 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2s0: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-i2s", @@ -666,6 +845,41 @@ status = "disabled"; };

+ dai: dai@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-codec-i2s"; + reg = <0x01c22c00 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + codec: codec@1c22e00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a33-codec"; + reg = <0x01c22e00 0x600>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "bus", "mod"; + status = "disabled"; + }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun50i-a64-ths"; + reg = <0x01c25000 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -727,6 +941,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -738,6 +954,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -749,12 +967,13 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; @@ -808,6 +1027,28 @@ }; };

+ mali: gpu@1c40000 { + compatible = "allwinner,sun50i-a64-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, @@ -830,6 +1071,75 @@ status = "disabled"; };

+ mbus: dram-controller@1c62000 { + compatible = "allwinner,sun50i-a64-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu 112>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x40000000 0xc0000000>; + #interconnect-cells = <1>; + }; + + csi: csi@1cb0000 { + compatible = "allwinner,sun50i-a64-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_pins>; + status = "disabled"; + }; + + dsi: dsi@1ca0000 { + compatible = "allwinner,sun50i-a64-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy>; + phy-names = "dphy"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; + }; + }; + }; + + dphy: d-phy@1ca1000 { + compatible = "allwinner,sun50i-a64-mipi-dphy", + "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + status = "disabled"; + #phy-cells = <0>; + }; + + deinterlace: deinterlace@1e00000 { + compatible = "allwinner,sun50i-a64-deinterlace", + "allwinner,sun8i-h3-deinterlace"; + reg = <0x01e00000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; @@ -842,7 +1152,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled";

ports { @@ -867,7 +1177,7 @@ compatible = "allwinner,sun50i-a64-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu 7>; + <&ccu CLK_PLL_VIDEO0>; clock-names = "bus", "mod", "pll-0"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -875,11 +1185,12 @@ };

rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + compatible = "allwinner,sun50i-a64-rtc", + "allwinner,sun8i-h3-rtc"; + reg = <0x01f00000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clock-output-names = "rtc-osc32k", "rtc-osc32k-out"; + clock-output-names = "osc32k", "osc32k-out", "iosc"; clocks = <&osc32k>; #clock-cells = <1>; }; @@ -896,13 +1207,19 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, - <&ccu 11>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; };

+ codec_analog: codec-analog@1f015c0 { + compatible = "allwinner,sun50i-a64-codec-analog"; + reg = <0x01f015c0 0x4>; + status = "disabled"; + }; + r_i2c: i2c@1f02400 { compatible = "allwinner,sun50i-a64-i2c", "allwinner,sun6i-a31-i2c"; @@ -915,6 +1232,19 @@ #size-cells = <0>; };

+ r_ir: ir@1f02000 { + compatible = "allwinner,sun50i-a64-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01f02000 0x400>; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "disabled"; + }; + r_pwm: pwm@1f03800 { compatible = "allwinner,sun50i-a64-pwm", "allwinner,sun5i-a13-pwm"; @@ -942,12 +1272,17 @@ function = "s_i2c"; };

- r_pwm_pin: pwm { + r_ir_rx_pin: r-ir-rx-pin { + pins = "PL11"; + function = "s_cir_rx"; + }; + + r_pwm_pin: r-pwm-pin { pins = "PL10"; function = "s_pwm"; };

- r_rsb_pins: rsb { + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; }; @@ -972,6 +1307,7 @@ "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; }; }; diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h index d66432c6e67..318eb15c414 100644 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -43,8 +43,10 @@ #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ #define _DT_BINDINGS_CLK_SUN50I_A64_H_

+#define CLK_PLL_VIDEO0 7 #define CLK_PLL_PERIPH0 11

+#define CLK_CPUX 21 #define CLK_BUS_MIPI_DSI 28 #define CLK_BUS_CE 29 #define CLK_BUS_DMA 30 @@ -129,7 +131,7 @@ #define CLK_AVS 109 #define CLK_HDMI 110 #define CLK_HDMI_DDC 111 - +#define CLK_MBUS 112 #define CLK_DSI_DPHY 113 #define CLK_GPU 114

diff --git a/include/dt-bindings/clock/sun8i-de2.h b/include/dt-bindings/clock/sun8i-de2.h index 3bed63b524a..7768f73b051 100644 --- a/include/dt-bindings/clock/sun8i-de2.h +++ b/include/dt-bindings/clock/sun8i-de2.h @@ -15,4 +15,7 @@ #define CLK_MIXER1 7 #define CLK_WB 8

+#define CLK_BUS_ROT 9 +#define CLK_ROT 10 + #endif /* _DT_BINDINGS_CLOCK_SUN8I_DE2_H_ */ diff --git a/include/dt-bindings/reset/sun8i-de2.h b/include/dt-bindings/reset/sun8i-de2.h index 9526017432f..1c36a6ac86d 100644 --- a/include/dt-bindings/reset/sun8i-de2.h +++ b/include/dt-bindings/reset/sun8i-de2.h @@ -10,5 +10,6 @@ #define RST_MIXER0 0 #define RST_MIXER1 1 #define RST_WB 2 +#define RST_ROT 3

#endif /* _DT_BINDINGS_RESET_SUN8I_DE2_H_ */