Hi Tom,

Please pull this PR, these changes were there since from last release.

thanks, Jagan.

The following changes since commit 0354f4bef0f1ff1e160673794577ca00b23f3f1a:

sunxi: Add DRAM_SUN8I_A83T kconfig entry (2018-03-19 16:46:47 +0530)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to f3fed05e095439b3fd24990e20dbea1d4b03c121:

Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT" (2018-04-04 14:15:40 +0530)

---------------------------------------------------------------- Andre Przywara (11): sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware sunxi: gpio: add missing compatible strings net: sun8i-emac: support new pinctrl DT bindings net: sun8i-emac: add support for new EMAC DT binding arm: dts: sunxi: update A64 to new EMAC binding arm: dts: sunxi: update H3 to new EMAC binding arm: dts: sunxi: update H5 to new EMAC binding net: sun8i-emac: remove support for old binding sunxi: disable direct MMC environment sunxi: revert disabling of features Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"

Miquel Raynal (20): spl: fix binman_sym output check mtd: nand: sunxi: fix ECC strength choice spl: nand: sunxi: fix second case of modulo by zero error spl: nand: sunxi: fix typo on register name spl: nand: sunxi: introduce the nand_wait_int() helper spl: nand: sunxi: introduce the nand_wait_cmd_fifo_empty() helper spl: nand: sunxi: add missing status clear spl: nand: sunxi: create an helper to handle command execution spl: nand: sunxi: ensure enough time has passed after changing the column spl: nand: sunxi: make the reset column helper more generic sunxi: spl: deassert the NAND controller reset line spl: nand: sunxi: declare the ecc_bytes array globally spl: nand: sunxi: use PIO instead of DMA sunxi: spl: remove DMA related settings of the NAND controller sunxi: allow NAND support to be compiled for sun8i platforms sunxi: dts: enable NAND on NES classic sunxi: automatically select SPL_NAND_SUPPORT in Kconfig sunxi: make NAND_SUNXI use ARCH_SUNXI as default in Kconfig sunxi: move the NAND parameters to Kconfig configs: add NAND support for NES Classic

arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi | 51 +++-- arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 7 +- arch/arm/dts/sun8i-a23-a33.dtsi | 17 ++ arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 6 +- arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 7 +- arch/arm/dts/sun8i-h3-nanopi-neo.dts | 6 +- arch/arm/dts/sun8i-h3-orangepi-2.dts | 7 +- arch/arm/dts/sun8i-h3-orangepi-one.dts | 7 +- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 7 +- arch/arm/dts/sun8i-h3-orangepi-plus.dts | 8 +- arch/arm/dts/sun8i-h3-orangepi-plus2e.dts | 9 +- arch/arm/dts/sun8i-h3.dtsi | 69 ++++-- .../dts/sun8i-r16-nintendo-nes-classic-edition.dts | 14 ++ arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 6 + board/sunxi/README.sunxi64 | 6 + board/sunxi/board.c | 7 +- cmd/Kconfig | 5 - common/spl/spl.c | 10 +- configs/CHIP_pro_defconfig | 6 +- configs/Nintendo_NES_Classic_Edition_defconfig | 4 + configs/pine64_plus_defconfig | 1 + drivers/gpio/sunxi_gpio.c | 3 + drivers/mtd/nand/Kconfig | 26 ++- drivers/mtd/nand/sunxi_nand.c | 8 +- drivers/mtd/nand/sunxi_nand_spl.c | 236 ++++++++++----------- drivers/net/sun8i_emac.c | 89 +++++--- drivers/video/Kconfig | 2 - env/Kconfig | 1 - lib/Kconfig | 1 - 29 files changed, 390 insertions(+), 236 deletions(-)