[U-Boot] [PATCH] x86: galileo: Define mac addresses for the on-chip ethernet ports
Not like other x86 chipset, there is no EEPROM for the ethernet controller on the Intel Quark SoC to retreive the mac address after power up. With pre-defined mac addresses, U-Boot boots up and will not show "Error: dwmac.90006000 address not set" message.
Signed-off-by: Bin Meng bmeng.cn@gmail.com ---
include/configs/galileo.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/galileo.h b/include/configs/galileo.h index d4d0eb3..961d087 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -62,6 +62,8 @@ #define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_PHYLIB +#define CONFIG_ETHADDR 00:02:b3:00:00:00 +#define CONFIG_ETH1ADDR 00:02:b3:00:00:01
/* Environment configuration */ #define CONFIG_ENV_SECT_SIZE 0x1000
Hi Bin,
On 20 April 2015 at 23:05, Bin Meng bmeng.cn@gmail.com wrote:
Not like other x86 chipset, there is no EEPROM for the ethernet controller on the Intel Quark SoC to retreive the mac address after power up. With pre-defined mac addresses, U-Boot boots up and will not show "Error: dwmac.90006000 address not set" message.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
include/configs/galileo.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/galileo.h b/include/configs/galileo.h index d4d0eb3..961d087 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -62,6 +62,8 @@ #define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_PHYLIB +#define CONFIG_ETHADDR 00:02:b3:00:00:00 +#define CONFIG_ETH1ADDR 00:02:b3:00:00:01
I recall this coming up before with another board - we are not supposed to set a default MAC address since it may create inexplicable conflicts on the network if an org two boards on the same network one day. Can you just set an environment variable?
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
1.8.2.1
Regards, Simon
Hi Simon,
On Tue, Apr 21, 2015 at 9:54 PM, Simon Glass sjg@chromium.org wrote:
Hi Bin,
On 20 April 2015 at 23:05, Bin Meng bmeng.cn@gmail.com wrote:
Not like other x86 chipset, there is no EEPROM for the ethernet controller on the Intel Quark SoC to retreive the mac address after power up. With pre-defined mac addresses, U-Boot boots up and will not show "Error: dwmac.90006000 address not set" message.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
include/configs/galileo.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/galileo.h b/include/configs/galileo.h index d4d0eb3..961d087 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -62,6 +62,8 @@ #define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_PHYLIB +#define CONFIG_ETHADDR 00:02:b3:00:00:00 +#define CONFIG_ETH1ADDR 00:02:b3:00:00:01
I recall this coming up before with another board - we are not supposed to set a default MAC address since it may create inexplicable conflicts on the network if an org two boards on the same network one day. Can you just set an environment variable?
Yes, I can. But I see lots of boards already use CONFIG_ETHADDR in their board configuration files, so I assume this is allowed.
Regards, Bin
participants (2)
-
Bin Meng -
Simon Glass