[U-Boot-Users] [PATCH 2/6] AVR32: Make some AT32AP700x peripherals optional
Add a chip-features file providing definitions of the form
AT32AP700x_CHIP_HAS_<peripheral>
to indicate the availability of the given peripheral on the currently selected chip.
Signed-off-by: Haavard Skinnemoen hskinnemoen@atmel.com --- cpu/at32ap/at32ap700x/gpio.c | 7 ++++ include/asm-avr32/arch-at32ap700x/chip-features.h | 34 +++++++++++++++++++++ include/asm-avr32/arch-at32ap700x/clk.h | 8 +++++ include/asm-avr32/arch-at32ap700x/gpio.h | 8 +++++ 4 files changed, 57 insertions(+), 0 deletions(-) create mode 100644 include/asm-avr32/arch-at32ap700x/chip-features.h
diff --git a/cpu/at32ap/at32ap700x/gpio.c b/cpu/at32ap/at32ap700x/gpio.c index 52f5372..2d53726 100644 --- a/cpu/at32ap/at32ap700x/gpio.c +++ b/cpu/at32ap/at32ap700x/gpio.c @@ -21,6 +21,7 @@ */ #include <common.h>
+#include <asm/arch/chip-features.h> #include <asm/arch/gpio.h>
/* @@ -52,6 +53,7 @@ void gpio_enable_ebi(void) #endif }
+#ifdef AT32AP700x_CHIP_HAS_USART void gpio_enable_usart0(void) { gpio_select_periph_B(GPIO_PIN_PA8, 0); @@ -75,7 +77,9 @@ void gpio_enable_usart3(void) gpio_select_periph_B(GPIO_PIN_PB18, 0); gpio_select_periph_B(GPIO_PIN_PB19, 0); } +#endif
+#ifdef AT32AP700x_CHIP_HAS_MACB void gpio_enable_macb0(void) { gpio_select_periph_A(GPIO_PIN_PC3, 0); /* TXD0 */ @@ -125,7 +129,9 @@ void gpio_enable_macb1(void) gpio_select_periph_B(GPIO_PIN_PD15, 0); /* SPD */ #endif } +#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI void gpio_enable_mmci(void) { gpio_select_periph_A(GPIO_PIN_PA10, 0); /* CLK */ @@ -135,3 +141,4 @@ void gpio_enable_mmci(void) gpio_select_periph_A(GPIO_PIN_PA14, 0); /* DATA2 */ gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */ } +#endif diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h new file mode 100644 index 0000000..29b1fd6 --- /dev/null +++ b/include/asm-avr32/arch-at32ap700x/chip-features.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__ +#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__ + +/* Currently, all the AP700x chips have these */ +#define AT32AP700x_CHIP_HAS_USART +#define AT32AP700x_CHIP_HAS_MMCI + +/* Only AP7000 has ethernet interface */ +#ifdef CONFIG_AT32AP7000 +#define AT32AP700x_CHIP_HAS_MACB +#endif + +#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */ diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h index 7e20d97..ea84c08 100644 --- a/include/asm-avr32/arch-at32ap700x/clk.h +++ b/include/asm-avr32/arch-at32ap700x/clk.h @@ -22,6 +22,8 @@ #ifndef __ASM_AVR32_ARCH_CLK_H__ #define __ASM_AVR32_ARCH_CLK_H__
+#include <asm/arch/chip-features.h> + #ifdef CONFIG_PLL #define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) #else @@ -50,10 +52,13 @@ static inline unsigned long get_sdram_clk_rate(void) { return get_hsb_clk_rate(); } +#ifdef AT32AP700x_CHIP_HAS_USART static inline unsigned long get_usart_clk_rate(unsigned int dev_id) { return get_pba_clk_rate(); } +#endif +#ifdef AT32AP700x_CHIP_HAS_USART static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) { return get_pbb_clk_rate(); @@ -62,9 +67,12 @@ static inline unsigned long get_macb_hclk_rate(unsigned int dev_id) { return get_hsb_clk_rate(); } +#endif +#ifdef AT32AP700x_CHIP_HAS_MMCI static inline unsigned long get_mci_clk_rate(void) { return get_pbb_clk_rate(); } +#endif
#endif /* __ASM_AVR32_ARCH_CLK_H__ */ diff --git a/include/asm-avr32/arch-at32ap700x/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h index e4812d4..b10a3e4 100644 --- a/include/asm-avr32/arch-at32ap700x/gpio.h +++ b/include/asm-avr32/arch-at32ap700x/gpio.h @@ -22,6 +22,7 @@ #ifndef __ASM_AVR32_ARCH_GPIO_H__ #define __ASM_AVR32_ARCH_GPIO_H__
+#include <asm/arch/chip-features.h> #include <asm/arch/memory-map.h>
#define NR_GPIO_CONTROLLERS 5 @@ -201,12 +202,19 @@ void gpio_select_periph_A(unsigned int pin, int use_pullup); void gpio_select_periph_B(unsigned int pin, int use_pullup);
void gpio_enable_ebi(void); + +#ifdef AT32AP700x_CHIP_HAS_USART void gpio_enable_usart0(void); void gpio_enable_usart1(void); void gpio_enable_usart2(void); void gpio_enable_usart3(void); +#endif +#ifdef AT32AP700x_CHIP_HAS_MACB void gpio_enable_macb0(void); void gpio_enable_macb1(void); +#endif +#ifdef AT32AP700x_CHIP_HAS_MMCI void gpio_enable_mmci(void); +#endif
#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, which is a derivative of AT32AP7000.
Signed-off-by: Haavard Skinnemoen hskinnemoen@atmel.com --- MAKEALL | 1 + Makefile | 3 + include/configs/atstk1003.h | 184 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 188 insertions(+), 0 deletions(-) create mode 100644 include/configs/atstk1003.h
diff --git a/MAKEALL b/MAKEALL index 20e8137..fe661d2 100755 --- a/MAKEALL +++ b/MAKEALL @@ -640,6 +640,7 @@ LIST_coldfire=" \
LIST_avr32=" \ atstk1002 \ + atstk1003 \ "
######################################################################### diff --git a/Makefile b/Makefile index f650b27..03de2f1 100644 --- a/Makefile +++ b/Makefile @@ -2605,6 +2605,9 @@ bf561-ezkit_config: unconfig atstk1002_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+atstk1003_config : unconfig + @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x + ######################################################################### ######################################################################### ######################################################################### diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h new file mode 100644 index 0000000..194788b --- /dev/null +++ b/include/configs/atstk1003.h @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * Configuration settings for the ATSTK1003 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7001 1 +#define CONFIG_ATSTK1003 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the + * PLL frequency. + * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + */ +#define CFG_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + */ +#define CFG_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + */ +#define CFG_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + */ +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=/dev/mmcblk0p1 rootwait" + +#define CONFIG_BOOTCOMMAND \ + "mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_PIO2 1 +#define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE 0x24000000 +#define CFG_INTRAM_SIZE 0x8000 + +#define CFG_SDRAM_BASE 0x10000000 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) + +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "Uboot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */
ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, which is a derivative of AT32AP7000.
Signed-off-by: Haavard Skinnemoen hskinnemoen@atmel.com --- MAKEALL | 1 + Makefile | 3 + include/configs/atstk1004.h | 185 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 189 insertions(+), 0 deletions(-) create mode 100644 include/configs/atstk1004.h
diff --git a/MAKEALL b/MAKEALL index fe661d2..cd408a3 100755 --- a/MAKEALL +++ b/MAKEALL @@ -641,6 +641,7 @@ LIST_coldfire=" \ LIST_avr32=" \ atstk1002 \ atstk1003 \ + atstk1004 \ "
######################################################################### diff --git a/Makefile b/Makefile index 03de2f1..c24ecfd 100644 --- a/Makefile +++ b/Makefile @@ -2608,6 +2608,9 @@ atstk1002_config : unconfig atstk1003_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+atstk1004_config : unconfig + @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x + ######################################################################### ######################################################################### ######################################################################### diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h new file mode 100644 index 0000000..1bad171 --- /dev/null +++ b/include/configs/atstk1004.h @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * Configuration settings for the ATSTK1003 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7002 1 +#define CONFIG_ATSTK1004 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the + * PLL frequency. + * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + */ +#define CFG_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + */ +#define CFG_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + */ +#define CFG_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + */ +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=/dev/mmcblk0p1 rootwait" + +#define CONFIG_BOOTCOMMAND \ + "mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_PIO2 1 +#define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE 0x24000000 +#define CFG_INTRAM_SIZE 0x8000 + +#define CFG_SDRAM_BASE 0x10000000 +#define CFG_SDRAM_16BIT 1 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) + +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "Uboot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */
Add all the ATSTK1000 daughterboards to MAINTAINERS along with their "mother". Also update the entry for ATSTK1000 to be not only about the AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
Signed-off-by: Haavard Skinnemoen hskinnemoen@atmel.com --- MAINTAINERS | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS index b8c1fdc..ccf4d35 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -630,7 +630,10 @@ Hayden Fraser Hayden.Fraser@freescale.com
Haavard Skinnemoen hskinnemoen@atmel.com
- ATSTK1000 AT32AP7000 + ATSTK1000 AT32AP7xxx + ATSTK1002 AT32AP7000 + ATSTK1003 AT32AP7001 + ATSTK1004 AT32AP7002
######################################################################### # End of MAINTAINERS list #
As noted by Kim Phillips, these lists tend to become out of date.
Signed-off-by: Haavard Skinnemoen hskinnemoen@atmel.com --- README | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/README b/README index 09eb76f..0c2b020 100644 --- a/README +++ b/README @@ -235,9 +235,7 @@ The following options need to be configured: - Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS.
- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) - Define exactly one of - CONFIG_ATSTK1002 - + Define exactly one, e.g. CONFIG_ATSTK1002
- CPU Module Type: (if CONFIG_COGENT is defined) Define exactly one of
participants (1)
-
Haavard Skinnemoen