Signed-off-by: Nobuhiro Iwamatsu iwamatsu@nigauri.org --- drivers/pci/Makefile | 1 + drivers/pci/pci_sh7751.c | 199 ++++++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/pci.h | 7 +- 3 files changed, 204 insertions(+), 3 deletions(-) create mode 100644 drivers/pci/pci_sh7751.c

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index ef7781f..ad1b7dd 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -32,6 +32,7 @@ COBJS-y += pci_indirect.o COBJS-y += tsi108_pci.o COBJS-y += w83c553f.o COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o +COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o

COBJS := $(COBJS-y) diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c new file mode 100644 index 0000000..13b2193 --- /dev/null +++ b/drivers/pci/pci_sh7751.c @@ -0,0 +1,199 @@ +/* + * SH7751 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu iwamatsu@nigauri.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +/* Register addresses and such */ +#define SH7751_BCR (vu_long *)0xFF800000 +#define SH7751_BCR2 (vu_short*)0xFF800004 +#define SH7751_WCR1 (vu_long *)0xFF800008 +#define SH7751_WCR2 (vu_long *)0xFF80000C +#define SH7751_WCR3 (vu_long *)0xFF800010 +#define SH7751_MCR (vu_long *)0xFF800014 +#define SH7751_BCR3 (vu_short*)0xFF800050 +#define SH7751_PCICONF0 (vu_long *)0xFE200000 +#define SH7751_PCICONF1 (vu_long *)0xFE200004 +#define SH7751_PCICONF2 (vu_long *)0xFE200008 +#define SH7751_PCICONF3 (vu_long *)0xFE20000C +#define SH7751_PCICONF4 (vu_long *)0xFE200010 +#define SH7751_PCICONF5 (vu_long *)0xFE200014 +#define SH7751_PCICONF6 (vu_long *)0xFE200018 +#define SH7751_PCICR (vu_long *)0xFE200100 +#define SH7751_PCILSR0 (vu_long *)0xFE200104 +#define SH7751_PCILSR1 (vu_long *)0xFE200108 +#define SH7751_PCILAR0 (vu_long *)0xFE20010C +#define SH7751_PCILAR1 (vu_long *)0xFE200110 +#define SH7751_PCIMBR (vu_long *)0xFE2001C4 +#define SH7751_PCIIOBR (vu_long *)0xFE2001C8 +#define SH7751_PCIPINT (vu_long *)0xFE2001CC +#define SH7751_PCIPINTM (vu_long *)0xFE2001D0 +#define SH7751_PCICLKR (vu_long *)0xFE2001D4 +#define SH7751_PCIBCR1 (vu_long *)0xFE2001E0 +#define SH7751_PCIBCR2 (vu_long *)0xFE2001E4 +#define SH7751_PCIWCR1 (vu_long *)0xFE2001E8 +#define SH7751_PCIWCR2 (vu_long *)0xFE2001EC +#define SH7751_PCIWCR3 (vu_long *)0xFE2001F0 +#define SH7751_PCIMCR (vu_long *)0xFE2001F4 +#define SH7751_PCIBCR3 (vu_long *)0xFE2001F8 + +#define BCR1_BREQEN 0x00080000 +#define PCI_SH7751_ID 0x35051054 +#define PCI_SH7751R_ID 0x350E1054 +#define SH7751_PCICONF1_WCC 0x00000080 +#define SH7751_PCICONF1_PER 0x00000040 +#define SH7751_PCICONF1_BUM 0x00000004 +#define SH7751_PCICONF1_MES 0x00000002 +#define SH7751_PCICONF1_CMDS 0x000000C6 +#define SH7751_PCI_HOST_BRIDGE 0x6 +#define SH7751_PCICR_PREFIX 0xa5000000 +#define SH7751_PCICR_PRST 0x00000002 +#define SH7751_PCICR_CFIN 0x00000001 +#define SH7751_PCIPINT_D3 0x00000002 +#define SH7751_PCIPINT_D0 0x00000001 +#define SH7751_PCICLKR_PREFIX 0xa5000000 + +#define SH7751_PCI_MEM_BASE 0xFD000000 +#define SH7751_PCI_MEM_SIZE 0x01000000 +#define SH7751_PCI_IO_BASE 0xFE240000 +#define SH7751_PCI_IO_SIZE 0x00040000 + +#define SH7751_CS3_BASE_ADDR 0x0C000000 +#define SH7751_P2CS3_BASE_ADDR 0xAC000000 + +#define SH7751_PCIPAR (vu_long *)0xFE2001C0 +#define SH7751_PCIPDR (vu_long *)0xFE200220 + +#define p4_in(addr) *(addr) +#define p4_out(data,addr) *(addr) = (data) + +/* Double word */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + *value = p4_in(SH7751_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + p4_out(value, SH7751_PCIPDR); + + return 0; +} + +int pci_sh7751_init(struct pci_controller *hose) +{ + /* Double-check that we're a 7751 or 7751R chip */ + if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID + && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) { + printf("PCI: Unknown PCI host bridge.\n"); + return 1; + } + printf("PCI: SH7751 PCI host bridge found.\n"); + + /* Double-check some BSC config settings */ + /* (Area 3 non-MPX 32-bit, PCI bus pins) */ + if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) { + printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1)); + return 2; + } + if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 3; + } + if (p4_in(SH7751_BCR2) & 0x01) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 4; + } + + /* Force BREQEN in BCR1 to allow PCIC access */ + p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1); + + /* Toggle PCI reset pin */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR); + udelay(32); + p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR); + + /* Set cmd bits: WCC, PER, BUM, MES */ + /* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */ + p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */ + + /* Define this host as the host bridge */ + p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2); + + /* Force PCI clock(s) on */ + p4_out(0, SH7751_PCICLKR); + p4_out(0x03, SH7751_PCICLKR); + + /* Clear powerdown IRQs, also mask them (unused) */ + p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT); + p4_out(0, SH7751_PCIPINTM); + + p4_out(0xab000001, SH7751_PCICONF4); + + /* Set up target memory mappings (for external DMA access) */ + /* Map both P0 and P2 range to Area 3 RAM for ease of use */ + p4_out((64 - 1) << 20, SH7751_PCILSR0); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0); + p4_out(0, SH7751_PCILSR1); + p4_out(0, SH7751_PCILAR1); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5); + p4_out(0xd0000000, SH7751_PCICONF6); + + /* Map memory window to same address on PCI bus */ + p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR); + + /* Map IO window to same address on PCI bus */ + p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR); + + /* set BREQEN */ + p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1); + + /* Copy BSC registers into PCI BSC */ + p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1); + p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2); + p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3); + p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1); + p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2); + p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3); + p4_out(inl(SH7751_MCR), SH7751_PCIMCR); + + /* Finally, set central function init complete */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR); + + pci_sh4_init(hose); + + return 0; +} diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h index 821961f..bc59491 100644 --- a/include/asm-sh/pci.h +++ b/include/asm-sh/pci.h @@ -1,7 +1,7 @@ /* * SH4 PCI Controller (PCIC) for U-Boot. * (C) Dustin McIntire (dustin@sensoria.com) - * (C) 2007 Nobuhiro Iwamatsu iwamatsu@nigauri.org + * (C) 2007,2008 Nobuhiro Iwamatsu iwamatsu@nigauri.org * (C) 2008 Yusuke Goda goda.yusuke@renesas.com * * u-boot/include/asm-sh/pci.h @@ -28,8 +28,9 @@ #define _ASM_PCI_H_

#include <pci.h> - -#if defined(CONFIG_CPU_SH7780) +#if defined(CONFIG_SH7751_PCI) +int pci_sh7751_init(struct pci_controller *hose); +#elif defined(CONFIG_SH7780_PCI) int pci_sh7780_init(struct pci_controller *hose); #else #error "Not support PCI."