In contrast to some other Allwinner SoCs, there is no difference between the DTs for the Allwinner F1C100/F1C200 SoCs (sunvi) between the U-Boot and the Linux kernel repository.

Remove the old copies of the F1Cx00 related .dts and .dtsi files, and switch the whole suniv SoC over to use OF_UPSTREAM.

Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/dts/Makefile | 2 - arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 73 ---- arch/arm/dts/suniv-f1c100s.dtsi | 330 ------------------- arch/arm/dts/suniv-f1c200s-lctech-pi.dts | 76 ----- arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts | 81 ----- arch/arm/mach-sunxi/Kconfig | 1 + configs/lctech_pi_f1c200s_defconfig | 2 +- configs/licheepi_nano_defconfig | 2 +- 8 files changed, 3 insertions(+), 564 deletions(-) delete mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts delete mode 100644 arch/arm/dts/suniv-f1c100s.dtsi delete mode 100644 arch/arm/dts/suniv-f1c200s-lctech-pi.dts delete mode 100644 arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index aef0425c967..5627daa94db 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -530,8 +530,6 @@ dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \ stm32h743i-eval.dtb \ stm32h750i-art-pi.dtb

-dtb-$(CONFIG_MACH_SUNIV) += \ - suniv-f1c100s-licheepi-nano.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ diff --git a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts deleted file mode 100644 index 43896723a99..00000000000 --- a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) -/* - * Copyright 2018 Icenowy Zheng icenowy@aosc.io - */ - -/dts-v1/; -#include "suniv-f1c100s.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Lichee Pi Nano"; - compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; - - aliases { - mmc0 = &mmc0; - serial0 = &uart0; - spi0 = &spi0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&mmc0 { - broken-cd; - bus-width = <4>; - disable-wp; - status = "okay"; - vmmc-supply = <&reg_vcc3v3>; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pc_pins>; - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - }; -}; - -&otg_sram { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pe_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ - status = "okay"; -}; diff --git a/arch/arm/dts/suniv-f1c100s.dtsi b/arch/arm/dts/suniv-f1c100s.dtsi deleted file mode 100644 index 3c61d59ab5f..00000000000 --- a/arch/arm/dts/suniv-f1c100s.dtsi +++ /dev/null @@ -1,330 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) -/* - * Copyright 2018 Icenowy Zheng icenowy@aosc.io - * Copyright 2018 Mesih Kilinc mesihkilinc@gmail.com - */ - -#include <dt-bindings/clock/suniv-ccu-f1c100s.h> -#include <dt-bindings/reset/suniv-ccu-f1c100s.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - clocks { - osc24M: clk-24M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk-32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,arm926ej-s"; - device_type = "cpu"; - reg = <0x0>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram-controller@1c00000 { - compatible = "allwinner,suniv-f1c100s-system-control", - "allwinner,sun4i-a10-system-control"; - reg = <0x01c00000 0x30>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_d: sram@10000 { - compatible = "mmio-sram"; - reg = <0x00010000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00010000 0x1000>; - - otg_sram: sram-section@0 { - compatible = "allwinner,suniv-f1c100s-sram-d", - "allwinner,sun4i-a10-sram-d"; - reg = <0x0000 0x1000>; - status = "disabled"; - }; - }; - }; - - spi0: spi@1c05000 { - compatible = "allwinner,suniv-f1c100s-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@1c06000 { - compatible = "allwinner,suniv-f1c100s-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI1>; - status = "disabled"; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc0: mmc@1c0f000 { - compatible = "allwinner,suniv-f1c100s-mmc", - "allwinner,sun7i-a20-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ccu CLK_BUS_MMC0>, - <&ccu CLK_MMC0>, - <&ccu CLK_MMC0_OUTPUT>, - <&ccu CLK_MMC0_SAMPLE>; - clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu RST_BUS_MMC0>; - reset-names = "ahb"; - interrupts = <23>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@1c10000 { - compatible = "allwinner,suniv-f1c100s-mmc", - "allwinner,sun7i-a20-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ccu CLK_BUS_MMC1>, - <&ccu CLK_MMC1>, - <&ccu CLK_MMC1_OUTPUT>, - <&ccu CLK_MMC1_SAMPLE>; - clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu RST_BUS_MMC1>; - reset-names = "ahb"; - interrupts = <24>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usb_otg: usb@1c13000 { - compatible = "allwinner,suniv-f1c100s-musb"; - reg = <0x01c13000 0x0400>; - clocks = <&ccu CLK_BUS_OTG>; - resets = <&ccu RST_BUS_OTG>; - interrupts = <26>; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - allwinner,sram = <&otg_sram 1>; - status = "disabled"; - }; - - usbphy: phy@1c13400 { - compatible = "allwinner,suniv-f1c100s-usb-phy"; - reg = <0x01c13400 0x10>; - reg-names = "phy_ctrl"; - clocks = <&ccu CLK_USB_PHY0>; - clock-names = "usb0_phy"; - resets = <&ccu RST_USB_PHY0>; - reset-names = "usb0_reset"; - #phy-cells = <1>; - status = "disabled"; - }; - - ccu: clock@1c20000 { - compatible = "allwinner,suniv-f1c100s-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - intc: interrupt-controller@1c20400 { - compatible = "allwinner,suniv-f1c100s-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@1c20800 { - compatible = "allwinner,suniv-f1c100s-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <38>, <39>, <40>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - gpio-controller; - interrupt-controller; - #interrupt-cells = <3>; - #gpio-cells = <3>; - - mmc0_pins: mmc0-pins { - pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - function = "mmc0"; - drive-strength = <30>; - }; - - /omit-if-no-ref/ - i2c0_pd_pins: i2c0-pd-pins { - pins = "PD0", "PD12"; - function = "i2c0"; - }; - - spi0_pc_pins: spi0-pc-pins { - pins = "PC0", "PC1", "PC2", "PC3"; - function = "spi0"; - }; - - uart0_pe_pins: uart0-pe-pins { - pins = "PE0", "PE1"; - function = "uart0"; - }; - - /omit-if-no-ref/ - uart1_pa_pins: uart1-pa-pins { - pins = "PA2", "PA3"; - function = "uart1"; - }; - }; - - i2c0: i2c@1c27000 { - compatible = "allwinner,suniv-f1c100s-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x01c27000 0x400>; - interrupts = <7>; - clocks = <&ccu CLK_BUS_I2C0>; - resets = <&ccu RST_BUS_I2C0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@1c27400 { - compatible = "allwinner,suniv-f1c100s-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x01c27400 0x400>; - interrupts = <8>; - clocks = <&ccu CLK_BUS_I2C1>; - resets = <&ccu RST_BUS_I2C1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@1c27800 { - compatible = "allwinner,suniv-f1c100s-i2c", - "allwinner,sun6i-a31-i2c"; - reg = <0x01c27800 0x400>; - interrupts = <9>; - clocks = <&ccu CLK_BUS_I2C2>; - resets = <&ccu RST_BUS_I2C2>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - timer@1c20c00 { - compatible = "allwinner,suniv-f1c100s-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <13>, <14>, <15>; - clocks = <&osc24M>; - }; - - wdt: watchdog@1c20ca0 { - compatible = "allwinner,suniv-f1c100s-wdt", - "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = <16>; - clocks = <&osc32k>; - }; - - pwm: pwm@1c21000 { - compatible = "allwinner,suniv-f1c100s-pwm", - "allwinner,sun7i-a20-pwm"; - reg = <0x01c21000 0x400>; - clocks = <&osc24M>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@1c22c00 { - compatible = "allwinner,suniv-f1c100s-ir", - "allwinner,sun6i-a31-ir"; - reg = <0x01c22c00 0x400>; - clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>; - clock-names = "apb", "ir"; - resets = <&ccu RST_BUS_IR>; - interrupts = <6>; - status = "disabled"; - }; - - lradc: lradc@1c23400 { - compatible = "allwinner,suniv-f1c100s-lradc", - "allwinner,sun8i-a83t-r-lradc"; - reg = <0x01c23400 0x400>; - interrupts = <22>; - status = "disabled"; - }; - - uart0: serial@1c25000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c25000 0x400>; - interrupts = <1>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART0>; - resets = <&ccu RST_BUS_UART0>; - status = "disabled"; - }; - - uart1: serial@1c25400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c25400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART1>; - resets = <&ccu RST_BUS_UART1>; - status = "disabled"; - }; - - uart2: serial@1c25800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c25800 0x400>; - interrupts = <3>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART2>; - resets = <&ccu RST_BUS_UART2>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/dts/suniv-f1c200s-lctech-pi.dts deleted file mode 100644 index 2d2a3f026df..00000000000 --- a/arch/arm/dts/suniv-f1c200s-lctech-pi.dts +++ /dev/null @@ -1,76 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Arm Ltd, - * based on work: - * Copyright 2022 Icenowy Zheng uwu@icenowy.me - */ - -/dts-v1/; -#include "suniv-f1c100s.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Lctech Pi F1C200s"; - compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s", - "allwinner,suniv-f1c100s"; - - aliases { - serial0 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_vcc3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&mmc0 { - broken-cd; - bus-width = <4>; - disable-wp; - vmmc-supply = <&reg_vcc3v3>; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pc_pins>; - status = "okay"; - - flash@0 { - compatible = "spi-nand"; - reg = <0>; - spi-max-frequency = <40000000>; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pa_pins>; - status = "okay"; -}; - -/* - * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected - * to Vin, which supplies the board. Host mode works (if the board is powered - * otherwise), but peripheral is probably the intention. - */ -&usb_otg { - dr_mode = "peripheral"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts deleted file mode 100644 index 184c245041a..00000000000 --- a/arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Icenowy Zheng uwu@icenowy.me - */ - -/dts-v1/; -#include "suniv-f1c100s.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Popcorn Computer PopStick v1.1"; - compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick", - "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */ - linux,default-trigger = "heartbeat"; - }; - }; - - reg_vcc3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&mmc0 { - cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ - bus-width = <4>; - disable-wp; - vmmc-supply = <&reg_vcc3v3>; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pc_pins>; - status = "okay"; - - flash@0 { - compatible = "spi-nand"; - reg = <0>; - spi-max-frequency = <40000000>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pe_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "peripheral"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 8065161e61e..866b55833c0 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -279,6 +279,7 @@ config MACH_SUNIV select SUPPORT_SPL select SKIP_LOWLEVEL_INIT_ONLY select SPL_SKIP_LOWLEVEL_INIT_ONLY + imply OF_UPSTREAM

config MACH_SUN4I bool "sun4i (Allwinner A10)" diff --git a/configs/lctech_pi_f1c200s_defconfig b/configs/lctech_pi_f1c200s_defconfig index e1e8d3aaaa3..1588b3b4955 100644 --- a/configs/lctech_pi_f1c200s_defconfig +++ b/configs/lctech_pi_f1c200s_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c200s-lctech-pi" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/suniv-f1c200s-lctech-pi" CONFIG_SPL=y CONFIG_MACH_SUNIV=y CONFIG_DRAM_CLK=156 diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig index d59affb0d9c..051b1901f20 100644 --- a/configs/licheepi_nano_defconfig +++ b/configs/licheepi_nano_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/suniv-f1c100s-licheepi-nano" CONFIG_SPL=y CONFIG_MACH_SUNIV=y CONFIG_DRAM_CLK=156

In contrast to some other Allwinner SoCs, there is no difference between the DTs for the Allwinner A10 SoCs (sun4i) between the U-Boot and the Linux kernel repository.

Remove the old copies of the A10 related .dts and .dtsi files, and switch most of sun4i boards over to use OF_UPSTREAM.

There are two boards for which we don't have DTs in the kernel tree. Keep those two .dts files, plus the base .dtsi in the legacy U-Boot DT directory, and let their defconfig opt out of OF_UPSTREAM.

Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/dts/Makefile | 24 +- arch/arm/dts/sun4i-a10-a1000.dts | 255 ------------- arch/arm/dts/sun4i-a10-ba10-tvbox.dts | 151 -------- arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts | 159 -------- arch/arm/dts/sun4i-a10-cubieboard.dts | 255 ------------- arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts | 218 ----------- arch/arm/dts/sun4i-a10-gemei-g9.dts | 192 ---------- arch/arm/dts/sun4i-a10-hackberry.dts | 140 ------- arch/arm/dts/sun4i-a10-hyundai-a7hd.dts | 115 ------ arch/arm/dts/sun4i-a10-inet1.dts | 229 ----------- arch/arm/dts/sun4i-a10-inet97fv2.dts | 203 ---------- arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 357 ------------------ .../dts/sun4i-a10-itead-iteaduino-plus.dts | 126 ------- arch/arm/dts/sun4i-a10-jesurun-q5.dts | 181 --------- arch/arm/dts/sun4i-a10-marsboard.dts | 182 --------- arch/arm/dts/sun4i-a10-mini-xplus.dts | 144 ------- arch/arm/dts/sun4i-a10-mk802.dts | 144 ------- arch/arm/dts/sun4i-a10-mk802ii.dts | 111 ------ arch/arm/dts/sun4i-a10-olinuxino-lime.dts | 225 ----------- arch/arm/dts/sun4i-a10-pcduino.dts | 200 ---------- arch/arm/dts/sun4i-a10-pcduino2.dts | 67 ---- arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 206 ---------- arch/arm/dts/sun4i-a10-topwise-a721.dts | 242 ------------ arch/arm/mach-sunxi/Kconfig | 1 + configs/A10-OLinuXino-Lime_defconfig | 2 +- configs/Chuwi_V7_CW0825_defconfig | 2 +- configs/Cubieboard_defconfig | 2 +- configs/Hyundai_A7HD_defconfig | 2 +- configs/Linksprite_pcDuino_defconfig | 2 +- configs/Marsboard_A10_defconfig | 2 +- configs/Mele_A1000_defconfig | 2 +- configs/Mini-X_defconfig | 2 +- configs/ba10_tv_box_defconfig | 2 +- configs/dserve_dsrv9703c_defconfig | 2 +- configs/iNet_3F_defconfig | 1 + configs/iNet_3W_defconfig | 1 + configs/inet1_defconfig | 2 +- configs/inet97fv2_defconfig | 2 +- configs/inet9f_rev03_defconfig | 2 +- configs/jesurun_q5_defconfig | 2 +- configs/mk802_defconfig | 2 +- configs/mk802ii_defconfig | 2 +- configs/pov_protab2_ips9_defconfig | 2 +- configs/sunxi_Gemei_G9_defconfig | 2 +- 44 files changed, 22 insertions(+), 4143 deletions(-) delete mode 100644 arch/arm/dts/sun4i-a10-a1000.dts delete mode 100644 arch/arm/dts/sun4i-a10-ba10-tvbox.dts delete mode 100644 arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts delete mode 100644 arch/arm/dts/sun4i-a10-cubieboard.dts delete mode 100644 arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts delete mode 100644 arch/arm/dts/sun4i-a10-gemei-g9.dts delete mode 100644 arch/arm/dts/sun4i-a10-hackberry.dts delete mode 100644 arch/arm/dts/sun4i-a10-hyundai-a7hd.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet1.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet97fv2.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet9f-rev03.dts delete mode 100644 arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts delete mode 100644 arch/arm/dts/sun4i-a10-jesurun-q5.dts delete mode 100644 arch/arm/dts/sun4i-a10-marsboard.dts delete mode 100644 arch/arm/dts/sun4i-a10-mini-xplus.dts delete mode 100644 arch/arm/dts/sun4i-a10-mk802.dts delete mode 100644 arch/arm/dts/sun4i-a10-mk802ii.dts delete mode 100644 arch/arm/dts/sun4i-a10-olinuxino-lime.dts delete mode 100644 arch/arm/dts/sun4i-a10-pcduino.dts delete mode 100644 arch/arm/dts/sun4i-a10-pcduino2.dts delete mode 100644 arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts delete mode 100644 arch/arm/dts/sun4i-a10-topwise-a721.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5627daa94db..6a483f6743c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -531,30 +531,8 @@ dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb

dtb-$(CONFIG_MACH_SUN4I) += \ - sun4i-a10-a1000.dtb \ - sun4i-a10-ba10-tvbox.dtb \ - sun4i-a10-chuwi-v7-cw0825.dtb \ - sun4i-a10-cubieboard.dtb \ - sun4i-a10-dserve-dsrv9703c.dtb \ - sun4i-a10-gemei-g9.dtb \ - sun4i-a10-hackberry.dtb \ - sun4i-a10-hyundai-a7hd.dtb \ - sun4i-a10-inet1.dtb \ sun4i-a10-inet-3f.dtb \ - sun4i-a10-inet-3w.dtb \ - sun4i-a10-inet97fv2.dtb \ - sun4i-a10-inet9f-rev03.dtb \ - sun4i-a10-itead-iteaduino-plus.dtb \ - sun4i-a10-jesurun-q5.dtb \ - sun4i-a10-marsboard.dtb \ - sun4i-a10-mini-xplus.dtb \ - sun4i-a10-mk802.dtb \ - sun4i-a10-mk802ii.dtb \ - sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb \ - sun4i-a10-pcduino2.dtb \ - sun4i-a10-pov-protab2-ips9.dtb \ - sun4i-a10-topwise-a721.dtb + sun4i-a10-inet-3w.dtb dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts deleted file mode 100644 index 20f9ed24485..00000000000 --- a/arch/arm/dts/sun4i-a10-a1000.dts +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright 2013 Emilio López - * - * Emilio López emilio@elopez.com.ar - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Mele A1000"; - compatible = "mele,a1000", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "a1000:red:usr"; - gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - label = "a1000:blue:pwr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - reg_emac_3v3: emac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "emac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <20000>; - enable-active-high; - gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "On-board SPDIF"; - - simple-audio-card,cpu { - sound-dai = <&spdif>; - }; - - simple-audio-card,codec { - sound-dai = <&spdif_out>; - }; - }; - - spdif_out: spdif-out { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - }; -}; - -&ahci { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - phy-supply = <&reg_emac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -#include "axp209.dtsi" - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts deleted file mode 100644 index 816d534ac09..00000000000 --- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright 2014 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "BA10 tvbox"; - compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_usb0_vbus { - regulator-boot-on; - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts deleted file mode 100644 index 74262988881..00000000000 --- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Copyright 2015 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Chuwi V7 CW0825"; - compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; - - ft5306de4: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <1024>; - touchscreen-size-y = <768>; - }; -}; - -&lradc { - vref-supply = <&reg_vcc3v0>; - status = "okay"; - - button-800 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <800000>; - }; - - button-1000 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Back"; - linux,code = <KEY_BACK>; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts deleted file mode 100644 index 0645d606423..00000000000 --- a/arch/arm/dts/sun4i-a10-cubieboard.dts +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright 2012 Stefan Roese - * Stefan Roese sr@denx.de - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Cubietech Cubieboard"; - compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard>; - - led-0 { - label = "cubieboard:blue:usr"; - gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ - }; - - led-1 { - label = "cubieboard:green:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ - linux,default-trigger = "heartbeat"; - }; - }; -}; - -&ahci { - target-supply = <&reg_ahci_5v>; - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - led_pins_cubieboard: led-pins { - pins = "PH20", "PH21"; - function = "gpio_out"; - drive-strength = <20>; - }; -}; - -&reg_ahci_5v { - status = "okay"; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts deleted file mode 100644 index 63e77c05bfd..00000000000 --- a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Copyright 2016 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Dserve DSRV9703C"; - compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - power-supply = <&reg_vcc3v3>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - haptics { - compatible = "regulator-haptic"; - haptic-supply = <&reg_motor>; - min-microvolt = <3000000>; - max-microvolt = <3000000>; - }; - - reg_motor: reg-motor { - compatible = "regulator-fixed"; - regulator-name = "vcc-motor"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - enable-active-high; - gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - }; -}; - -&codec { - allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - /* pull-ups and devices require AXP209 LDO3 */ - status = "failed"; -}; - -&i2c2 { - status = "okay"; - - ft5406ee8: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; - touchscreen-size-x = <1024>; - touchscreen-size-y = <768>; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button-400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - - button-800 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <800000>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-gemei-g9.dts b/arch/arm/dts/sun4i-a10-gemei-g9.dts deleted file mode 100644 index ea7a59dcf8f..00000000000 --- a/arch/arm/dts/sun4i-a10-gemei-g9.dts +++ /dev/null @@ -1,192 +0,0 @@ -/* - * Copyright 2015 Priit Laes - * - * Priit Laes plaes@plaes.org - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Gemei G9 Tablet"; - compatible = "gemei,g9", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -/* - * TODO: - * 2x cameras via CSI - * AXP battery management - * NAND - * OTG - * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48 - */ -&codec { - /* PH15 controls power to external amplifier (ft2012q) */ - allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; - - /* Accelerometer */ - bma250@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */ - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - - status = "okay"; - - button-158 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <158730>; - }; - - button-349 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <349206>; - }; - - button-1142 { - label = "Esc"; - linux,code = <KEY_ESC>; - channel = <0>; - voltage = <1142856>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts deleted file mode 100644 index 47dea092250..00000000000 --- a/arch/arm/dts/sun4i-a10-hackberry.dts +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard maxime.ripard@free-electrons.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Miniand Hackberry"; - compatible = "miniand,hackberry", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_emac_3v3: emac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "emac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <20000>; - enable-active-high; - gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy0>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - phy-supply = <&reg_emac_3v3>; - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts deleted file mode 100644 index bf2044bac42..00000000000 --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright 2015 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Hyundai A7HD"; - compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts deleted file mode 100644 index 60e432a0ef1..00000000000 --- a/arch/arm/dts/sun4i-a10-inet1.dts +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright 2015 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "iNet-1"; - compatible = "inet-tek,inet1", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - power-supply = <&reg_vcc3v3>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; - - /* Accelerometer */ - bma250@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ - }; -}; - -&i2c2 { - status = "okay"; - - ft5x: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */ - touchscreen-size-x = <600>; - touchscreen-size-y = <1024>; - touchscreen-swapped-x-y; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button-200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button-1000 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-inet97fv2.dts b/arch/arm/dts/sun4i-a10-inet97fv2.dts deleted file mode 100644 index 76016f2ca29..00000000000 --- a/arch/arm/dts/sun4i-a10-inet97fv2.dts +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Copyright 2014 Open Source Support GmbH - * - * David Lanzendörfer david.lanzendoerfer@o2s.ch - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "INet-97F Rev 02"; - compatible = "primux,inet97fv2", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; - - ft5406ee8: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button-200 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <200000>; - }; - - button-600 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <600000>; - }; - - button-800 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <800000>; - }; - - button-1000 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Esc"; - linux,code = <KEY_ESC>; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts deleted file mode 100644 index 62e7aa587f8..00000000000 --- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Copyright 2015 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "iNet-9F Rev 03"; - compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - event-left-joystick-left { - label = "Left Joystick Left"; - linux,code = <ABS_X>; - linux,input-type = <EV_ABS>; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ - }; - - event-left-joystick-right { - label = "Left Joystick Right"; - linux,code = <ABS_X>; - linux,input-type = <EV_ABS>; - linux,input-value = <1>; - gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ - }; - - event-left-joystick-up { - label = "Left Joystick Up"; - linux,code = <ABS_Y>; - linux,input-type = <EV_ABS>; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ - }; - - event-left-joystick-down { - label = "Left Joystick Down"; - linux,code = <ABS_Y>; - linux,input-type = <EV_ABS>; - linux,input-value = <1>; - gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ - }; - - event-right-joystick-left { - label = "Right Joystick Left"; - linux,code = <ABS_Z>; - linux,input-type = <EV_ABS>; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ - }; - - event-right-joystick-right { - label = "Right Joystick Right"; - linux,code = <ABS_Z>; - linux,input-type = <EV_ABS>; - linux,input-value = <1>; - gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ - }; - - event-right-joystick-up { - label = "Right Joystick Up"; - linux,code = <ABS_RZ>; - linux,input-type = <EV_ABS>; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ - }; - - event-right-joystick-down { - label = "Right Joystick Down"; - linux,code = <ABS_RZ>; - linux,input-type = <EV_ABS>; - linux,input-value = <1>; - gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ - }; - - event-dpad-left { - label = "DPad Left"; - linux,code = <ABS_HAT0X>; - linux,input-type = <EV_ABS>; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ - }; - - event-dpad-right { - label = "DPad Right"; - linux,code = <ABS_HAT0X>; - linux,input-type = <EV_ABS>; - linux,input-value = <1>; - gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ - }; - - event-dpad-up { - label = "DPad Up"; - linux,code = <ABS_HAT0Y>; - linux,input-type = <EV_ABS>; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ - }; - - event-dpad-down { - label = "DPad Down"; - linux,code = <ABS_HAT0Y>; - linux,input-type = <EV_ABS>; - linux,input-value = <1>; - gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ - }; - - event-x { - label = "Button X"; - linux,code = <BTN_X>; - gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ - }; - - event-y { - label = "Button Y"; - linux,code = <BTN_Y>; - gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ - }; - - event-a { - label = "Button A"; - linux,code = <BTN_A>; - gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ - }; - - event-b { - label = "Button B"; - linux,code = <BTN_B>; - gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ - }; - - event-select { - label = "Select Button"; - linux,code = <BTN_SELECT>; - gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ - }; - - event-start { - label = "Start Button"; - linux,code = <BTN_START>; - gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ - }; - - event-top-left { - label = "Top Left Button"; - linux,code = <BTN_TL>; - gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ - }; - - event-top-right { - label = "Top Right Button"; - linux,code = <BTN_TR>; - gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ - }; - }; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; - - /* Accelerometer */ - bma250@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ - }; -}; - -&i2c2 { - status = "okay"; - - ft5406ee8: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button-200 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <200000>; - }; - - button-600 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <600000>; - }; - - button-800 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <800000>; - }; - - button-1000 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Esc"; - linux,code = <KEY_ESC>; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts deleted file mode 100644 index d4e319d16aa..00000000000 --- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright 2015 Josef Gajdusek atx@atx.name - * Copyright 2015 - Marcus Cooper codekipper@gmail.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-itead-core-common.dtsi" - -/ { - model = "Iteaduino Plus A10"; - compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10"; -}; - -&ahci { - target-supply = <&reg_ahci_5v>; - status = "okay"; -}; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins>; - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - axp209: pmic@34 { - interrupts = <0>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&reg_ahci_5v { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-0 = <&uart0_pb_pins>; -}; diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts deleted file mode 100644 index 1aeb0bd5519..00000000000 --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Copyright 2015 Gábor Nyers - * - * Gábor Nyers gabor.nyers@gmail.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Jesurun Q5"; - compatible = "jesurun,q5", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led { - label = "q5:green:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ - }; - - }; - - reg_emac_3v3: emac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "emac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <20000>; - enable-active-high; - gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ - }; -}; - -&ahci { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - phy-supply = <&reg_emac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_usb0_vbus { - regulator-boot-on; - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts deleted file mode 100644 index 81fdb217d33..00000000000 --- a/arch/arm/dts/sun4i-a10-marsboard.dts +++ /dev/null @@ -1,182 +0,0 @@ -/* - * Copyright 2015 Aleksei Mamlin - * Aleksei Mamlin mamlinav@gmail.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "HAOYU Electronics Marsboard A10"; - compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "marsboard:red1:usr"; - gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - label = "marsboard:red2:usr"; - gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>; - }; - - led-2 { - label = "marsboard:red3:usr"; - gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; - }; - - led-3 { - label = "marsboard:red4:usr"; - gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&ahci { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-mini-xplus.dts b/arch/arm/dts/sun4i-a10-mini-xplus.dts deleted file mode 100644 index f9d74e21031..00000000000 --- a/arch/arm/dts/sun4i-a10-mini-xplus.dts +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard maxime.ripard@free-electrons.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "PineRiver Mini X-Plus"; - compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&ir0_rx_pins { - /* The ir receiver is not always populated */ - bias-pull-up; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_usb0_vbus { - regulator-boot-on; - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-mk802.dts b/arch/arm/dts/sun4i-a10-mk802.dts deleted file mode 100644 index 059fe9c5d02..00000000000 --- a/arch/arm/dts/sun4i-a10-mk802.dts +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright 2015 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "MK802"; - compatible = "allwinner,mk802", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; -}; - -&codec { - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-mk802ii.dts b/arch/arm/dts/sun4i-a10-mk802ii.dts deleted file mode 100644 index 17dcdf03111..00000000000 --- a/arch/arm/dts/sun4i-a10-mk802ii.dts +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright 2015 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "MK802ii"; - compatible = "allwinner,mk802ii", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts deleted file mode 100644 index 83d283cf663..00000000000 --- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright 2014 - Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Olimex A10-OLinuXino-LIME"; - compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; - - led { - label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; -}; - -&ahci { - target-supply = <&reg_ahci_5v>; - status = "okay"; -}; - -&cpu0 { - /* - * The A10-Lime is known to be unstable when running at 1008 MHz - */ - operating-points = - /* kHz uV */ - <912000 1350000>, - <864000 1300000>, - <624000 1250000>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&i2c1 { - status = "okay"; - - eeprom: eeprom@50 { - compatible = "atmel,24c16"; - reg = <0x50>; - pagesize = <16>; - }; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - led_pins_olinuxinolime: led-pin { - pins = "PH2"; - function = "gpio_out"; - drive-strength = <20>; - }; -}; - -&reg_ahci_5v { - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts deleted file mode 100644 index a332d61fd56..00000000000 --- a/arch/arm/dts/sun4i-a10-pcduino.dts +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Copyright 2014 Zoltan HERPAI - * Zoltan HERPAI wigyori@uid0.hu - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "LinkSprite pcDuino"; - compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "pcduino:green:tx"; - gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; - }; - - led-1 { - label = "pcduino:green:rx"; - gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-back { - label = "Key Back"; - linux,code = <KEY_BACK>; - gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; - }; - - key-home { - label = "Key Home"; - linux,code = <KEY_HOME>; - gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; - }; - - key-menu { - label = "Key Menu"; - linux,code = <KEY_MENU>; - gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -#include "axp209.dtsi" - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */ - usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */ - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-pcduino2.dts b/arch/arm/dts/sun4i-a10-pcduino2.dts deleted file mode 100644 index bc4f128965e..00000000000 --- a/arch/arm/dts/sun4i-a10-pcduino2.dts +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2015 Siarhei Siamashka siarhei.siamashka@gmail.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * The LinkSprite pcDuino2 board is almost identical to the older - * LinkSprite pcDuino1 board. The only software visible difference - * is that the pcDuino2 board got a USB VBUS voltage regulator, which - * is controlled by the PD2 pin (pulled-up by default). Also one of - * the USB host ports has been replaced with a USB WIFI chip. - */ - -#include "sun4i-a10-pcduino.dts" - -/ { - model = "LinkSprite pcDuino2"; - compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10"; -}; - -&reg_usb2_vbus { - gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */ - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts deleted file mode 100644 index c3259694764..00000000000 --- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright 2015 Hans de Goede hdegoede@redhat.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Point of View Protab2-IPS9"; - compatible = "pov,protab2-ips9", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - power-supply = <&reg_vcc3v3>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&codec { - allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - /* pull-ups and devices require AXP209 LDO3 */ - status = "failed"; -}; - -&i2c2 { - status = "okay"; - - touchscreen@5c { - compatible = "pixcir,pixcir_tangoc"; - reg = <0x5c>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ - attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */ - enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; - wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; - touchscreen-size-x = <1024>; - touchscreen-size-y = <768>; - touchscreen-inverted-x; - touchscreen-inverted-y; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button-400 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <400000>; - }; - - button-800 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <800000>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-topwise-a721.dts b/arch/arm/dts/sun4i-a10-topwise-a721.dts deleted file mode 100644 index 3628f12d252..00000000000 --- a/arch/arm/dts/sun4i-a10-topwise-a721.dts +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2020 Pascal Roeleven dev@pascalroeleven.nl - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Topwise A721"; - compatible = "topwise,a721", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>; - power-supply = <&reg_vbat>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - brightness-levels = <0 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - panel { - compatible = "starry,kr070pe2t"; - backlight = <&backlight>; - power-supply = <&reg_lcd_power>; - - port { - panel_input: endpoint { - remote-endpoint = <&tcon0_out_panel>; - }; - }; - }; - - reg_lcd_power: reg-lcd-power { - compatible = "regulator-fixed"; - regulator-name = "reg-lcd-power"; - gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ - enable-active-high; - }; - - reg_vbat: reg-vbat { - compatible = "regulator-fixed"; - regulator-name = "vbat"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -&battery_power_supply { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - accelerometer@4c { - compatible = "fsl,mma7660"; - reg = <0x4c>; - }; -}; - -&i2c2 { - status = "okay"; - - touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - vcc-supply = <&reg_vcc3v3>; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button-571 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <571428>; - }; - - button-761 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <761904>; - }; -}; - -&mmc0 { - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - vcc-pb-supply = <&reg_vcc3v3>; - vcc-pf-supply = <&reg_vcc3v3>; - vcc-ph-supply = <&reg_vcc3v3>; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&tcon0_out { - tcon0_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 866b55833c0..09d9f995d24 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -289,6 +289,7 @@ config MACH_SUN4I select SUPPORT_SPL imply SPL_SYS_I2C_LEGACY imply SYS_I2C_LEGACY + imply OF_UPSTREAM

config MACH_SUN5I bool "sun5i (Allwinner A13)" diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 57e91d0f017..96e3d19038b 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-olinuxino-lime" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 02b3e69584f..40f52d1a8d3 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-chuwi-v7-cw0825" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index ab3f65ad667..9fc57c23f43 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-cubieboard" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 482e0fb7a83..541f98db9e1 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-hyundai-a7hd" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_EMR1=4 diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 49dcfa098ee..0e1a7780c3d 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-pcduino" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB1_VBUS_PIN="" diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 3c5312d8824..c7608ed0fdc 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-marsboard" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_AHCI=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 9ac2e4839d9..93e73ebe3f1 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-a1000" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_VIDEO_VGA=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index e8bc1485766..e64352b4b6a 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mini-xplus" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index b89dd8ea62b..c76f36ec37e 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-ba10-tvbox" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=384 diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index f5ff69d7d63..06a79c935d7 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-dserve-dsrv9703c" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 5cc1a1d57f4..5ab210b345b 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f" +# CONFIG_OF_UPSTREAM is not set CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index 38b20109a57..415575cc228 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w" +# CONFIG_OF_UPSTREAM is not set CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index f81120b1197..68a6df50e42 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet1" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index d5d2dc32c93..a5414e2c502 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet97fv2" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet97fv2" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig index 4485f930236..5b0cda10f3b 100644 --- a/configs/inet9f_rev03_defconfig +++ b/configs/inet9f_rev03_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet9f-rev03" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index c99be7cea4e..b41c2cf3c05 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-jesurun-q5" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=312 diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 416565e5af2..8ebd5e9cbc3 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mk802" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB2_VBUS_PIN="PH12" diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 965a9cd5c4b..c56a4c7c6a0 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mk802ii" CONFIG_SPL=y CONFIG_MACH_SUN4I=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig index a62c9f8fa37..330c97fd6dc 100644 --- a/configs/pov_protab2_ips9_defconfig +++ b/configs/pov_protab2_ips9_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pov-protab2-ips9" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-pov-protab2-ips9" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index 3fee7c2e50c..4f3d0ec7443 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-gemei-g9" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432