PMIC interrupt can be active high or active low depending on BIT(1) of the GPIO_INT_CFG pin. The default is 0x1, which means active high. Change the polarity in the device tree to reflect the default state.

This change does not impact U-Boot directly as there are no interrupts at this stage but it keeps the device tree synced with Linux.

Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com --- arch/arm/dts/px30-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts index 53ab8bc7db..b1a4f72152 100644 --- a/arch/arm/dts/px30-evb.dts +++ b/arch/arm/dts/px30-evb.dts @@ -179,7 +179,7 @@ compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; rockchip,system-power-controller;