Hi Tom,

This PR fixes the pinctrl bias bit handling code and the dr-mode setup on the G12A DWC3 glue driver when switching USB device/host back and forth.

The CI job is at https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/pipelines/5575

Thanks, Neil

The following changes since commit 5a1a8a63be8f7262a300eddafb18020926b12fb6:

Merge tag 'u-boot-atmel-fixes-2021.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel (2020-12-11 15:55:17 -0500)

are available in the Git repository at:

https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic.git tags/u-boot-amlogic-20201215

for you to fetch changes up to 5ccd5d2cc98224108ae9fb09593a862c9caa5e80:

pinctrl: meson: fix bit manipulation of pin bias configuration (2020-12-14 19:58:54 +0100)

---------------------------------------------------------------- - fix pinctrl BIAS setup which caused failure on some eMMC models - fix dr-mode configuration in dwc3-meson-g12a glue driver

---------------------------------------------------------------- Marek Szyprowski (1): usb: dwc3-meson-g12a: always configure dr-mode

Neil Armstrong (1): pinctrl: meson: fix bit manipulation of pin bias configuration

drivers/pinctrl/meson/pinctrl-meson.c | 4 ++-- drivers/usb/dwc3/dwc3-meson-g12a.c | 3 --- 2 files changed, 2 insertions(+), 5 deletions(-)