On Thu, 2021-04-15 at 10:19 +0300, Oleksandr Suvorov wrote:

Update the u-boot image build instructions to support the latest revision V1.1B of the module Apalis iMX8X. The rst document formatting is fixed.

Signed-off-by: Oleksandr Suvorov oleksandr.suvorov@toradex.com

Thanks for taking this up!

Reviewed-by: Philippe Schenker philippe.schenker@toradex.com

---

doc/board/toradex/apalix-imx8x.rst | 10 +++++-----  1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/doc/board/toradex/apalix-imx8x.rst b/doc/board/toradex/apalix-imx8x.rst index efa7e0c72e3..0b88a8143eb 100644 --- a/doc/board/toradex/apalix-imx8x.rst +++ b/doc/board/toradex/apalix-imx8x.rst @@ -1,7 +1,7 @@  .. SPDX-License-Identifier: GPL-2.0+

-Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)

+Apalis iMX8X V1.1B Module (SoC NXP i.MX8QXP RevC) +=================================================    Quick Start  ----------- @@ -27,20 +27,20 @@ Get and Build the ARM Trusted Firmware      $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)    Get System Controller firmware

---

+------------------------------    .. code-block:: bash        $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/sc...    Get SECO container

---

+------------------    .. code-block:: bash        $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin      $ sh imx-seco-3.7.4.bin -    $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img +    $ cp imx-seco-3.7.4/firmware/seco/mx8qxc0-ahab-container.img $(builddir)/mx8qx-ahab-container.img    Build U-Boot  ------------