When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address, so fix it accordingly.

Reported-by: Igor Opaniuk igor.opaniuk@toradex.com Signed-off-by: Fabio Estevam festevam@gmail.com --- board/freescale/mx6sllevk/mx6sllevk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx6sllevk/mx6sllevk.c b/board/freescale/mx6sllevk/mx6sllevk.c index 227d178e07..0a36b46e9e 100644 --- a/board/freescale/mx6sllevk/mx6sllevk.c +++ b/board/freescale/mx6sllevk/mx6sllevk.c @@ -57,7 +57,7 @@ int power_init_board(void) u32 switch_num = 6; u32 offset = PFUZE100_SW1CMODE;

- ret = pmic_get("pfuze100", &dev); + ret = pmic_get("pfuze100@08", &dev); if (ret == -ENODEV) return 0;

Subject: [PATCH 1/3] mx7dsabresd: Fix the pmic_get() parameter in the DM case

When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address, so fix it accordingly.

Reported-by: Igor Opaniuk igor.opaniuk@toradex.com Signed-off-by: Fabio Estevam festevam@gmail.com

Reviewed-by: Peng Fan peng.fan@nxp.com

---

board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index f1120d67e3..05cf8c8c7c 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -326,7 +326,7 @@ int power_init_board(void) struct udevice *dev; int ret, dev_id, rev_id;

• ret = pmic_get("pfuze3000", &dev);

• ret = pmic_get("pfuze3000@08", &dev); if (ret == -ENODEV) return 0; if (ret != 0)

-- 2.17.1