The TI DA850/OMAP-L138/AM18x EVM can be populated with devices having different maximum allowed CPU clock rating.

The maximum clock the chip can support can only be determined from the label on the package (not software readable).

Introduce a method to pass the maximum allowed clock rate information to kernel using ATAG_REVISION. The kernel uses this information to determine the maximum cpu clock rate reachable using cpufreq.

Note that U-Boot itself does not set the CPU clock rate. The CPU clock is setup by a primary bootloader ("UBL"). The rate setup by UBL could be different from the maximum clock rate supported by the device.

Signed-off-by: Sekhar Nori nsekhar@ti.com --- Changes in v3: a) renamed maxspeed to maxcpuclk b) add information regarding the new environment variable in README.davinci c) use if-else instead of switch to check for value range rather than specific values of maxcpuclk d) change comment to document values returned in bit[0-3] by get_board_rev() in binary

board/davinci/da8xxevm/da850evm.c | 33 +++++++++++++++++++++++++++++++++ doc/README.davinci | 13 +++++++++++++ include/configs/da850evm.h | 1 + 3 files changed, 47 insertions(+), 0 deletions(-)

diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index eeb456c..266c4d8 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -70,6 +70,39 @@ static const struct lpsc_resource lpsc[] = { { DAVINCI_LPSC_GPIO }, };

+#ifndef CONFIG_DA850_EVM_MAX_CPU_CLK +#define CONFIG_DA850_EVM_MAX_CPU_CLK 300000000 +#endif + +/* + * get_board_rev() - setup to pass kernel board revision information + * Returns: + * bit[0-3] Maximum cpu clock rate supported by onboard SoC + * 0000b - 300 MHz + * 0001b - 372 MHz + * 0010b - 408 MHz + * 0011b - 456 MHz + */ +u32 get_board_rev(void) +{ + char *s; + u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK; + u32 rev = 0; + + s = getenv("maxcpuclk"); + if (s) + maxcpuclk = simple_strtoul(s, NULL, 10); + + if (maxcpuclk >= 456000000) + rev = 3; + else if (maxcpuclk >= 408000000) + rev = 2; + else if (maxcpuclk >= 372000000) + rev = 1; + + return rev; +} + int board_init(void) { #ifndef CONFIG_USE_IRQ diff --git a/doc/README.davinci b/doc/README.davinci index a2e96a5..3e624ee 100644 --- a/doc/README.davinci +++ b/doc/README.davinci @@ -95,6 +95,19 @@ into the RAM. The programmers and UBL are always released as part of any standard TI software release associated with an SOC.

+Environment Variables +===================== + +The DA850 EVM allows the user to specify the maximum cpu clock allowed by the +silicon, in Hz, via an environment variable "maxcpuclk". + +The maximum clock rate allowed depends on the silicon populated on the EVM. +Please make sure you understand the restrictions placed on this clock in the +device specific datasheet before setting up this variable. + +If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK +is used to obtain this information. + Links =====

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 357715d..3ea9032 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -102,6 +102,7 @@ */ #define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) #define CONFIG_CMDLINE_TAG +#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTARGS \ "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"