Hi! I tried to useing falcom mode from nand flash: ti-u-boot, am335x based board using modified am335x_evm. include/configs/am335x_evm.h falcon mode variables untouched.

I ran manually commands presented in: https://git.ti.com/ti-u-boot/ti-u-boot/blobs/ti-u-boot-2016.05/board/ti/am33... with the exception that I took dtb spl-os partition, so nand read instead of load nand, usin nand read. I get following printout from falcon mode preparation: => run nandargs => nand read ${loadaddr} NAND.kernel

NAND read: device 0 offset 0x200000, size 0x800000 8388608 bytes read: OK => nand read ${fdtaddr} NAND.u-boot-spl-os

NAND read: device 0 offset 0x80000, size 0x40000 262144 bytes read: OK => run nandargs => spl export fdt ${loadaddr} - ${fdtaddr} data abort pc : [<8ff611b2>] lr : [<8ff66325>] reloc pc : [<8080e1b2>] lr : [<80813325>] sp : 8ef28bd0 ip : 8ff971c7 fp : 8ffb30a0 r10: 8ffb30a0 r9 : 8ef32ed8 r8 : 8ef28c6c r7 : 00000003 r6 : 00000007 r5 : 8ffb30a0 r4 : 82000000 r3 : 00000000 r2 : 82000008 r1 : 82000000 r0 : 8ffa1711 Flags: Nzcv IRQs off FIQs on Mode SVC_32 Resetting CPU ...

resetting ...

What might go wrong? Thanks, Matti