On 01.10.2015 22:48, Soeren Moch wrote:

Set missing boot address in bootm command. This fixes the error: Wrong Image Format for bootm command ERROR: can't get kernel image!

Reported-by: Uwe Scheffler scheffler.u@web.de Signed-off-by: Soeren Moch smoch@web.de Tested-by: Uwe Scheffler scheffler.u@web.de

---

Cc: Stefano Babic sbabic@denx.de Cc: Uwe Scheffler scheffler.u@web.de

Stefano, Tom,

since this fixes a user reported error, can we pull this in for v2015.10?

Thanks, Soeren

---

include/configs/tbs2910.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 66cb274..5943104 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -190,7 +190,7 @@ "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ "rdinit=/sbin/init enable_wait_mode=off\0" \ "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \

• 	"mmc read 0x10800000 0x800 0x4000; bootm\0" \
  

• 	"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
  

  "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ "run bootargs_upd; " \