Reading doc/board/google/chromebook_coral.rst we can see that at some point it was intended to put the bloblist in CAR, rather than DRAM, at some point during development. This is fine for TPL/SPL stages where we have very minimal information stored in the bloblist and so we can set the limit there to 4KiB and then expand it to 196KiB in U-Boot proper so there's room for ACPI tables and so forth. We also update the documentation to use the same location for CONFIG_BLOBLIST_ADDR in both references.

Signed-off-by: Tom Rini trini@konsulko.com --- Looking at https://source.denx.de/u-boot/u-boot/-/jobs/978027 this brings Coral back to just having the known TPM issue to resolve wrt test cases.

Cc: Simon Glass sjg@chromium.org --- configs/chromebook_coral_defconfig | 5 +++-- doc/board/google/chromebook_coral.rst | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig index 0fb730497386..b4f7e61ad0d4 100644 --- a/configs/chromebook_coral_defconfig +++ b/configs/chromebook_coral_defconfig @@ -2,6 +2,7 @@ CONFIG_X86=y CONFIG_TEXT_BASE=0x1110000 CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SYS_MALLOC_F_LEN=0x3d00 +CONFIG_BLOBLIST_SIZE_RELOC=0x30000 CONFIG_NR_DRAM_BANKS=8 CONFIG_MAX_CPUS=8 CONFIG_SPL_DM_SPI=y @@ -44,8 +45,8 @@ CONFIG_LOGF_FUNC=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BLOBLIST=y # CONFIG_TPL_BLOBLIST is not set -CONFIG_BLOBLIST_ADDR=0x100000 -CONFIG_BLOBLIST_SIZE=0x30000 +CONFIG_BLOBLIST_ADDR=0xfef10000 +CONFIG_BLOBLIST_SIZE=0x1000 CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_HANDOFF=y CONFIG_SPL_SEPARATE_BSS=y diff --git a/doc/board/google/chromebook_coral.rst b/doc/board/google/chromebook_coral.rst index 1eda769c7528..b48afb279386 100644 --- a/doc/board/google/chromebook_coral.rst +++ b/doc/board/google/chromebook_coral.rst @@ -243,7 +243,7 @@ board_init_r(), as per the rules, and DRAM is available then. SPL sets up a bloblist and passes the SPL hand-off information to U-Boot proper. This includes a pointer to the HOB list as well as DRAM information. See struct arch_spl_handoff. The bloblist address is set by CONFIG_BLOBLIST_ADDR, -normally 100000. +normally fef10000.

SPL uses SPI flash to update the MRC caches in ROM. This speeds up subsequent boots. Be warned that SPL can take 30 seconds without this cache! This is a