Hi Tom,

Please pull the STM32 related patches for v2020.10: u-boot-stm32-20200813

CI status: https://gitlab.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/4403

Thanks Patrice

The following changes since commit 554e5514ac00f204282c4a2376ae65935d104e60:

configs: Resync with savedefconfig (2020-08-10 15:31:07 -0400)

are available in the Git repository at:

https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200813

for you to fetch changes up to d0a3c4f9dbf0d661d3b91f46f0fa4db2dc33bb78:

board: stm32mp1: use const for struct node_info (2020-08-13 10:10:33 +0200)

---------------------------------------------------------------- - Use IS_ENABLED to prevent ifdef in board_key_check for STM32MP - Add STM32 FMC2 EBI controller driver - Fix dwc3-sti-glue which allows STiH410-B2260 to boot again - Add fitImage its entry for 587-200 DHCOR SoM - Add both PDK2 and DRC02 DT into DHCOM fitImage its - Fix DHCOM KS8851 ethernet MAC address - Remove stm32mp1 board.c file - Use const for struct node_info in board stm32mp1.c file

---------------------------------------------------------------- Christophe Kerello (11): mtd: rawnand: stm32_fmc2: fix a buffer overflow mtd: rawnand: stm32_fmc2: remove useless inline comments mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where relevant mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros mtd: rawnand: stm32_fmc2: use clrsetbits_le32 memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver mtd: rawnand: stm32_fmc2: get resources from parent node board: stm32mp1: update fdt fixup partitions table configs: stm32mp: add CONFIG_STM32_FMC2_EBI ARM: dts: stm32: add FMC2 EBI support for stm32mp157c

Marek Vasut (3): ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage its ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM ARM: dts: stm32: Update eth1addr from EEPROM if eth1 present

Patrice Chotard (1): usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter

Patrick Delaunay (13): board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup arm: stm32mp: bsec: use IS_ENABLED to prevent ifdef arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdef board: stm32mp1: remove board.c board: stm32mp1: use const for struct node_info

arch/arm/dts/stm32mp151.dtsi | 43 +- arch/arm/dts/stm32mp157c-ev1.dts | 16 +- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 1 + arch/arm/mach-stm32mp/bsec.c | 86 +- .../arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c | 5 +- arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 100 +- board/dhelectronics/dh_stm32mp1/board.c | 33 +- board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 32 +- board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its | 3 +- board/st/common/stm32mp_dfu.c | 20 +- board/st/stm32mp1/board.c | 36 - board/st/stm32mp1/stm32mp1.c | 201 ++-- configs/stm32mp15_basic_defconfig | 1 + configs/stm32mp15_dhcom_basic_defconfig | 1 + configs/stm32mp15_trusted_defconfig | 1 + drivers/memory/Kconfig | 9 + drivers/memory/Makefile | 1 + drivers/memory/stm32-fmc2-ebi.c | 1056 ++++++++++++++++++++ drivers/mtd/nand/raw/stm32_fmc2_nand.c | 499 +++++---- drivers/usb/host/dwc3-sti-glue.c | 2 +- 20 files changed, 1627 insertions(+), 519 deletions(-) delete mode 100644 board/st/stm32mp1/board.c create mode 100644 drivers/memory/stm32-fmc2-ebi.c