[U-Boot] [PATCH v4 1/3] spi: pl022: Simplify platdata code

pl022 spi driver support both OF_CONTROL and PLATDATA, this patch is trying to simplify the code that differentiating platdata vs of_control. - Move OF_CONTROL code at one place - Handle clock setup code directly in pl022_spi_ofdata_to_platdata
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v4: - preserve fdtdec.h Changes for v3: - none Changes for v2: - Update commit message - Use struct clk for clkdev
drivers/spi/pl022_spi.c | 48 ++++++++++++---------------- include/dm/platform_data/pl022_spi.h | 7 ---- 2 files changed, 20 insertions(+), 35 deletions(-)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index 86b71d2e21..05f4f6f481 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -72,11 +72,7 @@
struct pl022_spi_slave { void *base; -#if !CONFIG_IS_ENABLED(OF_PLATDATA) - struct clk clk; -#else unsigned int freq; -#endif };
/* @@ -96,30 +92,13 @@ static int pl022_is_supported(struct pl022_spi_slave *ps) return 0; }
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) -static int pl022_spi_ofdata_to_platdata(struct udevice *bus) -{ - struct pl022_spi_pdata *plat = bus->platdata; - const void *fdt = gd->fdt_blob; - int node = dev_of_offset(bus); - - plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size); - - return clk_get_by_index(bus, 0, &plat->clk); -} -#endif - static int pl022_spi_probe(struct udevice *bus) { struct pl022_spi_pdata *plat = dev_get_platdata(bus); struct pl022_spi_slave *ps = dev_get_priv(bus);
ps->base = ioremap(plat->addr, plat->size); -#if !CONFIG_IS_ENABLED(OF_PLATDATA) - ps->clk = plat->clk; -#else ps->freq = plat->freq; -#endif
/* Check the PL022 version */ if (!pl022_is_supported(ps)) @@ -240,11 +219,7 @@ static int pl022_spi_set_speed(struct udevice *bus, uint speed) u16 scr = SSP_SCR_MIN, cr0 = 0, cpsr = SSP_CPSR_MIN, best_scr = scr, best_cpsr = cpsr; u32 min, max, best_freq = 0, tmp; -#if !CONFIG_IS_ENABLED(OF_PLATDATA) - u32 rate = clk_get_rate(&ps->clk); -#else u32 rate = ps->freq; -#endif bool found = false;
max = spi_rate(rate, SSP_CPSR_MIN, SSP_SCR_MIN); @@ -316,6 +291,25 @@ static const struct dm_spi_ops pl022_spi_ops = { };
#if !CONFIG_IS_ENABLED(OF_PLATDATA) +static int pl022_spi_ofdata_to_platdata(struct udevice *bus) +{ + struct pl022_spi_pdata *plat = bus->platdata; + const void *fdt = gd->fdt_blob; + int node = dev_of_offset(bus); + struct clk clkdev; + int ret; + + plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size); + + ret = clk_get_by_index(bus, 0, &clkdev); + if (ret) + return ret; + + plat->freq = clk_get_rate(&clkdev); + + return 0; +} + static const struct udevice_id pl022_spi_ids[] = { { .compatible = "arm,pl022-spi" }, { } @@ -327,11 +321,9 @@ U_BOOT_DRIVER(pl022_spi) = { .id = UCLASS_SPI, #if !CONFIG_IS_ENABLED(OF_PLATDATA) .of_match = pl022_spi_ids, -#endif - .ops = &pl022_spi_ops, -#if !CONFIG_IS_ENABLED(OF_PLATDATA) .ofdata_to_platdata = pl022_spi_ofdata_to_platdata, #endif + .ops = &pl022_spi_ops, .platdata_auto_alloc_size = sizeof(struct pl022_spi_pdata), .priv_auto_alloc_size = sizeof(struct pl022_spi_slave), .probe = pl022_spi_probe, diff --git a/include/dm/platform_data/pl022_spi.h b/include/dm/platform_data/pl022_spi.h index 77fe6da3cb..df8870169d 100644 --- a/include/dm/platform_data/pl022_spi.h +++ b/include/dm/platform_data/pl022_spi.h @@ -10,19 +10,12 @@ #ifndef __PL022_SPI_H__ #define __PL022_SPI_H__
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) -#include <clk.h> -#endif #include <fdtdec.h>
struct pl022_spi_pdata { fdt_addr_t addr; fdt_size_t size; -#if !CONFIG_IS_ENABLED(OF_PLATDATA) - struct clk clk; -#else unsigned int freq; -#endif };
#endif

This patch can drop unnecessary include files in pl022_spi driver.
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v4: - none Changes for v3: - split patch from previous
drivers/spi/pl022_spi.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index 05f4f6f481..f2e5367225 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -9,16 +9,11 @@ * Driver for ARM PL022 SPI Controller. */
-#include <asm/io.h> #include <clk.h> #include <common.h> #include <dm.h> #include <dm/platform_data/pl022_spi.h> -#include <fdtdec.h> -#include <linux/bitops.h> -#include <linux/bug.h> #include <linux/io.h> -#include <linux/kernel.h> #include <spi.h>
#define SSP_CR0 0x000

Hi all,
On Sat, Nov 24, 2018 at 05:47:22PM +0530, Jagan Teki wrote:
This patch can drop unnecessary include files in pl022_spi driver.
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v4:
- none
Changes for v3:
- split patch from previous
drivers/spi/pl022_spi.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index 05f4f6f481..f2e5367225 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -9,16 +9,11 @@
- Driver for ARM PL022 SPI Controller.
*/
-#include <asm/io.h> #include <clk.h> #include <common.h> #include <dm.h> #include <dm/platform_data/pl022_spi.h> -#include <fdtdec.h> -#include <linux/bitops.h> -#include <linux/bug.h> #include <linux/io.h> -#include <linux/kernel.h> #include <spi.h>
#define SSP_CR0 0x000
Acked-by: Quentin Schulz quentin.schulz@bootlin.com
Thanks for the patch, Quentin

On Tue, Nov 27, 2018 at 1:30 PM Quentin Schulz quentin.schulz@bootlin.com wrote:
Hi all,
On Sat, Nov 24, 2018 at 05:47:22PM +0530, Jagan Teki wrote:
This patch can drop unnecessary include files in pl022_spi driver.
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v4:
- none
Changes for v3:
- split patch from previous
drivers/spi/pl022_spi.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index 05f4f6f481..f2e5367225 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -9,16 +9,11 @@
- Driver for ARM PL022 SPI Controller.
*/
-#include <asm/io.h> #include <clk.h> #include <common.h> #include <dm.h> #include <dm/platform_data/pl022_spi.h> -#include <fdtdec.h> -#include <linux/bitops.h> -#include <linux/bug.h> #include <linux/io.h> -#include <linux/kernel.h> #include <spi.h>
#define SSP_CR0 0x000
Acked-by: Quentin Schulz quentin.schulz@bootlin.com
Applied to u-boot-spi/master

Rename platform_data include file as spi_pl022.h from pl022_spi.h, this is generic notation used for spi platdata include files.
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v4: - none Changes for v3: - split patch from previous
drivers/spi/pl022_spi.c | 2 +- include/dm/platform_data/{pl022_spi.h => spi_pl022.h} | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) rename include/dm/platform_data/{pl022_spi.h => spi_pl022.h} (82%)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index f2e5367225..32bb8c8d21 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -12,7 +12,7 @@ #include <clk.h> #include <common.h> #include <dm.h> -#include <dm/platform_data/pl022_spi.h> +#include <dm/platform_data/spi_pl022.h> #include <linux/io.h> #include <spi.h>
diff --git a/include/dm/platform_data/pl022_spi.h b/include/dm/platform_data/spi_pl022.h similarity index 82% rename from include/dm/platform_data/pl022_spi.h rename to include/dm/platform_data/spi_pl022.h index df8870169d..63a58ee453 100644 --- a/include/dm/platform_data/pl022_spi.h +++ b/include/dm/platform_data/spi_pl022.h @@ -7,8 +7,8 @@ * in ofdata_to_platdata. */
-#ifndef __PL022_SPI_H__ -#define __PL022_SPI_H__ +#ifndef __spi_pl022_h +#define __spi_pl022_h
#include <fdtdec.h>
@@ -18,4 +18,4 @@ struct pl022_spi_pdata { unsigned int freq; };
-#endif +#endif /* __spi_pl022_h */

Hi Jagan,
On Sat, Nov 24, 2018 at 05:47:23PM +0530, Jagan Teki wrote:
Rename platform_data include file as spi_pl022.h from pl022_spi.h, this is generic notation used for spi platdata include files.
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v4:
- none
Changes for v3:
- split patch from previous
drivers/spi/pl022_spi.c | 2 +- include/dm/platform_data/{pl022_spi.h => spi_pl022.h} | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) rename include/dm/platform_data/{pl022_spi.h => spi_pl022.h} (82%)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index f2e5367225..32bb8c8d21 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -12,7 +12,7 @@ #include <clk.h> #include <common.h> #include <dm.h> -#include <dm/platform_data/pl022_spi.h> +#include <dm/platform_data/spi_pl022.h> #include <linux/io.h> #include <spi.h>
diff --git a/include/dm/platform_data/pl022_spi.h b/include/dm/platform_data/spi_pl022.h similarity index 82% rename from include/dm/platform_data/pl022_spi.h rename to include/dm/platform_data/spi_pl022.h index df8870169d..63a58ee453 100644 --- a/include/dm/platform_data/pl022_spi.h +++ b/include/dm/platform_data/spi_pl022.h @@ -7,8 +7,8 @@
- in ofdata_to_platdata.
*/
-#ifndef __PL022_SPI_H__ -#define __PL022_SPI_H__ +#ifndef __spi_pl022_h +#define __spi_pl022_h
#include <fdtdec.h>
@@ -18,4 +18,4 @@ struct pl022_spi_pdata { unsigned int freq; };
-#endif +#endif /* __spi_pl022_h */
Acked-by: Quentin Schulz quentin.schulz@bootlin.com
Thanks for the patch, Quentin

On Tue, Nov 27, 2018 at 1:31 PM Quentin Schulz quentin.schulz@bootlin.com wrote:
Hi Jagan,
On Sat, Nov 24, 2018 at 05:47:23PM +0530, Jagan Teki wrote:
Rename platform_data include file as spi_pl022.h from pl022_spi.h, this is generic notation used for spi platdata include files.
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v4:
- none
Changes for v3:
- split patch from previous
drivers/spi/pl022_spi.c | 2 +- include/dm/platform_data/{pl022_spi.h => spi_pl022.h} | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) rename include/dm/platform_data/{pl022_spi.h => spi_pl022.h} (82%)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index f2e5367225..32bb8c8d21 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -12,7 +12,7 @@ #include <clk.h> #include <common.h> #include <dm.h> -#include <dm/platform_data/pl022_spi.h> +#include <dm/platform_data/spi_pl022.h> #include <linux/io.h> #include <spi.h>
diff --git a/include/dm/platform_data/pl022_spi.h b/include/dm/platform_data/spi_pl022.h similarity index 82% rename from include/dm/platform_data/pl022_spi.h rename to include/dm/platform_data/spi_pl022.h index df8870169d..63a58ee453 100644 --- a/include/dm/platform_data/pl022_spi.h +++ b/include/dm/platform_data/spi_pl022.h @@ -7,8 +7,8 @@
- in ofdata_to_platdata.
*/
-#ifndef __PL022_SPI_H__ -#define __PL022_SPI_H__ +#ifndef __spi_pl022_h +#define __spi_pl022_h
#include <fdtdec.h>
@@ -18,4 +18,4 @@ struct pl022_spi_pdata { unsigned int freq; };
-#endif +#endif /* __spi_pl022_h */
Acked-by: Quentin Schulz quentin.schulz@bootlin.com
Applied to u-boot-spi/master

Hi Jagan,
On Sat, Nov 24, 2018 at 05:47:21PM +0530, Jagan Teki wrote:
pl022 spi driver support both OF_CONTROL and PLATDATA, this patch is trying to simplify the code that differentiating platdata vs of_control.
- Move OF_CONTROL code at one place
- Handle clock setup code directly in pl022_spi_ofdata_to_platdata
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v4:
- preserve fdtdec.h
Changes for v3:
- none
Changes for v2:
- Update commit message
- Use struct clk for clkdev
drivers/spi/pl022_spi.c | 48 ++++++++++++---------------- include/dm/platform_data/pl022_spi.h | 7 ---- 2 files changed, 20 insertions(+), 35 deletions(-)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index 86b71d2e21..05f4f6f481 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -72,11 +72,7 @@
struct pl022_spi_slave { void *base; -#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- struct clk clk;
-#else unsigned int freq; -#endif };
/* @@ -96,30 +92,13 @@ static int pl022_is_supported(struct pl022_spi_slave *ps) return 0; }
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) -static int pl022_spi_ofdata_to_platdata(struct udevice *bus) -{
- struct pl022_spi_pdata *plat = bus->platdata;
- const void *fdt = gd->fdt_blob;
- int node = dev_of_offset(bus);
- plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size);
- return clk_get_by_index(bus, 0, &plat->clk);
-} -#endif
static int pl022_spi_probe(struct udevice *bus) { struct pl022_spi_pdata *plat = dev_get_platdata(bus); struct pl022_spi_slave *ps = dev_get_priv(bus);
ps->base = ioremap(plat->addr, plat->size); -#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- ps->clk = plat->clk;
-#else ps->freq = plat->freq; -#endif
/* Check the PL022 version */ if (!pl022_is_supported(ps)) @@ -240,11 +219,7 @@ static int pl022_spi_set_speed(struct udevice *bus, uint speed) u16 scr = SSP_SCR_MIN, cr0 = 0, cpsr = SSP_CPSR_MIN, best_scr = scr, best_cpsr = cpsr; u32 min, max, best_freq = 0, tmp; -#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- u32 rate = clk_get_rate(&ps->clk);
-#else u32 rate = ps->freq; -#endif bool found = false;
max = spi_rate(rate, SSP_CPSR_MIN, SSP_SCR_MIN); @@ -316,6 +291,25 @@ static const struct dm_spi_ops pl022_spi_ops = { };
#if !CONFIG_IS_ENABLED(OF_PLATDATA) +static int pl022_spi_ofdata_to_platdata(struct udevice *bus) +{
- struct pl022_spi_pdata *plat = bus->platdata;
- const void *fdt = gd->fdt_blob;
- int node = dev_of_offset(bus);
- struct clk clkdev;
- int ret;
- plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size);
- ret = clk_get_by_index(bus, 0, &clkdev);
- if (ret)
return ret;
- plat->freq = clk_get_rate(&clkdev);
- return 0;
+}
static const struct udevice_id pl022_spi_ids[] = { { .compatible = "arm,pl022-spi" }, { } @@ -327,11 +321,9 @@ U_BOOT_DRIVER(pl022_spi) = { .id = UCLASS_SPI, #if !CONFIG_IS_ENABLED(OF_PLATDATA) .of_match = pl022_spi_ids, -#endif
- .ops = &pl022_spi_ops,
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) .ofdata_to_platdata = pl022_spi_ofdata_to_platdata, #endif
- .ops = &pl022_spi_ops, .platdata_auto_alloc_size = sizeof(struct pl022_spi_pdata), .priv_auto_alloc_size = sizeof(struct pl022_spi_slave), .probe = pl022_spi_probe,
diff --git a/include/dm/platform_data/pl022_spi.h b/include/dm/platform_data/pl022_spi.h index 77fe6da3cb..df8870169d 100644 --- a/include/dm/platform_data/pl022_spi.h +++ b/include/dm/platform_data/pl022_spi.h @@ -10,19 +10,12 @@ #ifndef __PL022_SPI_H__ #define __PL022_SPI_H__
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) -#include <clk.h> -#endif #include <fdtdec.h>
struct pl022_spi_pdata { fdt_addr_t addr; fdt_size_t size; -#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- struct clk clk;
-#else unsigned int freq; -#endif };
#endif
Acked-by: Quentin Schulz quentin.schulz@bootlin.com
Thanks for the patch, Quentin

On Tue, Nov 27, 2018 at 1:29 PM Quentin Schulz quentin.schulz@bootlin.com wrote:
Hi Jagan,
On Sat, Nov 24, 2018 at 05:47:21PM +0530, Jagan Teki wrote:
pl022 spi driver support both OF_CONTROL and PLATDATA, this patch is trying to simplify the code that differentiating platdata vs of_control.
- Move OF_CONTROL code at one place
- Handle clock setup code directly in pl022_spi_ofdata_to_platdata
Cc: Quentin Schulz quentin.schulz@bootlin.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v4:
- preserve fdtdec.h
Changes for v3:
- none
Changes for v2:
- Update commit message
- Use struct clk for clkdev
drivers/spi/pl022_spi.c | 48 ++++++++++++---------------- include/dm/platform_data/pl022_spi.h | 7 ---- 2 files changed, 20 insertions(+), 35 deletions(-)
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c index 86b71d2e21..05f4f6f481 100644 --- a/drivers/spi/pl022_spi.c +++ b/drivers/spi/pl022_spi.c @@ -72,11 +72,7 @@
struct pl022_spi_slave { void *base; -#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct clk clk;
-#else unsigned int freq; -#endif };
/* @@ -96,30 +92,13 @@ static int pl022_is_supported(struct pl022_spi_slave *ps) return 0; }
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) -static int pl022_spi_ofdata_to_platdata(struct udevice *bus) -{
struct pl022_spi_pdata *plat = bus->platdata;
const void *fdt = gd->fdt_blob;
int node = dev_of_offset(bus);
plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size);
return clk_get_by_index(bus, 0, &plat->clk);
-} -#endif
static int pl022_spi_probe(struct udevice *bus) { struct pl022_spi_pdata *plat = dev_get_platdata(bus); struct pl022_spi_slave *ps = dev_get_priv(bus);
ps->base = ioremap(plat->addr, plat->size);
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
ps->clk = plat->clk;
-#else ps->freq = plat->freq; -#endif
/* Check the PL022 version */ if (!pl022_is_supported(ps))
@@ -240,11 +219,7 @@ static int pl022_spi_set_speed(struct udevice *bus, uint speed) u16 scr = SSP_SCR_MIN, cr0 = 0, cpsr = SSP_CPSR_MIN, best_scr = scr, best_cpsr = cpsr; u32 min, max, best_freq = 0, tmp; -#if !CONFIG_IS_ENABLED(OF_PLATDATA)
u32 rate = clk_get_rate(&ps->clk);
-#else u32 rate = ps->freq; -#endif bool found = false;
max = spi_rate(rate, SSP_CPSR_MIN, SSP_SCR_MIN);
@@ -316,6 +291,25 @@ static const struct dm_spi_ops pl022_spi_ops = { };
#if !CONFIG_IS_ENABLED(OF_PLATDATA) +static int pl022_spi_ofdata_to_platdata(struct udevice *bus) +{
struct pl022_spi_pdata *plat = bus->platdata;
const void *fdt = gd->fdt_blob;
int node = dev_of_offset(bus);
struct clk clkdev;
int ret;
plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size);
ret = clk_get_by_index(bus, 0, &clkdev);
if (ret)
return ret;
plat->freq = clk_get_rate(&clkdev);
return 0;
+}
static const struct udevice_id pl022_spi_ids[] = { { .compatible = "arm,pl022-spi" }, { } @@ -327,11 +321,9 @@ U_BOOT_DRIVER(pl022_spi) = { .id = UCLASS_SPI, #if !CONFIG_IS_ENABLED(OF_PLATDATA) .of_match = pl022_spi_ids, -#endif
.ops = &pl022_spi_ops,
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) .ofdata_to_platdata = pl022_spi_ofdata_to_platdata, #endif
.ops = &pl022_spi_ops, .platdata_auto_alloc_size = sizeof(struct pl022_spi_pdata), .priv_auto_alloc_size = sizeof(struct pl022_spi_slave), .probe = pl022_spi_probe,
diff --git a/include/dm/platform_data/pl022_spi.h b/include/dm/platform_data/pl022_spi.h index 77fe6da3cb..df8870169d 100644 --- a/include/dm/platform_data/pl022_spi.h +++ b/include/dm/platform_data/pl022_spi.h @@ -10,19 +10,12 @@ #ifndef __PL022_SPI_H__ #define __PL022_SPI_H__
-#if !CONFIG_IS_ENABLED(OF_PLATDATA) -#include <clk.h> -#endif #include <fdtdec.h>
struct pl022_spi_pdata { fdt_addr_t addr; fdt_size_t size; -#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct clk clk;
-#else unsigned int freq; -#endif };
#endif
Acked-by: Quentin Schulz quentin.schulz@bootlin.com
Applied to u-boot-spi/master
participants (2)
-
Jagan Teki
-
Quentin Schulz