[U-Boot] Problem with JTAG - mpc8315e
Hello,
I've started the bring-up process in my board. All power sources are up and the JTAG interface is OK. I'm getting the following result, the JTAG starts and tries to stop the processor, but it doesn't stop.
I put BDI2000 log below.
- CONFIG: loading configuration file passed - CONFIG: loading register definition passed - TARGET: processing user reset request - BDI asserts HRESET - Reset JTAG controller passed - Bypass check: 0x00000001 => 0x00000001 - JTAG exists check passed - IDCODE is 0x268B401D - BDI removes HRESET - PVR is 0x80850020 - SVR is 0x80B40012 - BDI sets breakpoint at 0xFFF00100 - BDI resumes program execution - COP status is 0x01 - Waiting for target stop failed - TARGET: Break at boot vector failed, freeze forced - TARGET: Target PVR is 0x80850020 - TARGET: resetting target passed - TARGET: processing target startup .... - COP status is 0x01 *** Core is freezed, no restart possible # PPC: timeout while waiting for freeze *** TARGET: processing target startup failed # PPC: timeout while waiting for freeze - TARGET: target will be restarted in 10 sec
Thanks in advance,
I've attached the BDI2000 configuration file
Hi Raphael,
I've started the bring-up process in my board. All power sources are up and the JTAG interface is OK. I'm getting the following result, the JTAG starts and tries to stop the processor, but it doesn't stop.
Did you try to contact Abatron support? They are usually pretty good at answering such questions.
Cheers Detlev
Hello Detlev,
Yes, I did. In fact they're analyzing this right now, but I know that there are many people in this list that have large experience with this JTAG.
Thanks,
Raphael
On Tue, Jul 14, 2009 at 8:40 AM, Detlev Zundel dzu@denx.de wrote:
Hi Raphael,
I've started the bring-up process in my board. All power sources are up
and
the JTAG interface is OK. I'm getting the following result, the JTAG starts and tries to stop the processor, but it doesn't stop.
Did you try to contact Abatron support? They are usually pretty good at answering such questions.
Cheers Detlev
-- One of the main causes of the fall of the Roman Empire was that, lacking zero, they had no way to indicate successful termination of their C programs. -- Robert Firth -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu@denx.de
participants (2)
-
Detlev Zundel -
Raphael Amorim