Wolfgang, As it happens, I'm adding a board entry for the Cogent CSB337. I'm new to gdb debugging and am unsure on setting up the bdi2000 for this. I have followed the steps in the bdi manual but they are quite lacking.

Do you have anything written on the typical bdi setup for debugging u-boot?

Glenn Heard gheard@zoominternet.net Software Engineer gheard@altronicinc.com Altronic Inc. www.altronicinc.com ICQ: 123194600 --- A politician is a person who can tell you to go to hell and make you feel good to be on your way.

-----Original Message----- From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net] On Behalf Of Wolfgang Denk Sent: Tuesday, July 20, 2004 9:38 AM To: Olivier Singla Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] LITE5200 board: Bus Fault with 2 network cards

The recommended (most efficient) way to debug the system is with a BDI, though.

Best regards,

Wolfgang Denk

-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de If it has syntax, it isn't user friendly.

---

This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_idG21&alloc_id%10040&op=ick _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users