Dear Reinhard Meyer & All,                Apology for not sending to the mailing list; forwarding the same to the mailing list. There is already a #define CONFIG_AT91SAM9260ek 1 in /include/configs/at91sam9260ek.h. I will check further.

Please help me if you have any clue further. Thanks & regards Sandeep Suresh.

________________________________ From: Reinhard Meyer u-boot@emk-elektronik.de To: sandeep suresh sandeep.suresh@yahoo.co.in; u-boot u-boot@lists.denx.de Sent: Tue, 24 August, 2010 1:50:24 PM Subject: Re: [U-Boot] Non-experimental U-Boot compilation

Dear sandeep suresh,

Dear Reinhard Meyer, Appreciate your quick response. I had done this earlier before posting this mail, but with the same problem: step 1) export PATH=$PATH:/work/arm/4.3.2/bin step 2) make distclean step 3) make AT91SAM9260ek_config step 4)make Can you please help me further, please.

I can't help you with the following tasks:

1. find out what are the differences between 9260-EK and 9G20-EK ?

2. find out what subtle differences might exist between 9260 and 9G20 SoC?

It might be more than "AT91SAM9G20 = 400MHz version of  AT91SAM9260"...

And I can't see in above transcript where you set the #define I mentioned.

"#ifdef CONFIG_AT91SAM9G20EK" exists in various places in the source, but I do not know if that ever was a really working port or just someone starting on it.

Reinhard

PS: it is mandatory to post replies to the mailing list as well!