Emails to the board maintainer "Rishi Bhattacharya rishi@ti.com" have been bouncing.

Tom suggested to remove this board.

Remove also omap1510_udc.c because this is the last board to enable it.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Suggested-by: Tom Rini trini@ti.com ---

Changes in v2: None

arch/arm/Kconfig | 4 - board/ti/omap5912osk/Kconfig | 23 - board/ti/omap5912osk/MAINTAINERS | 6 - board/ti/omap5912osk/Makefile | 9 - board/ti/omap5912osk/config.mk | 30 - board/ti/omap5912osk/lowlevel_init.S | 477 ----------- board/ti/omap5912osk/omap5912osk.c | 307 ------- configs/omap5912osk_defconfig | 2 - doc/README.scrapyard | 1 + drivers/usb/gadget/Makefile | 1 - drivers/usb/gadget/omap1510_udc.c | 1506 ---------------------------------- include/configs/omap1510.h | 756 ----------------- include/configs/omap5912osk.h | 174 ---- 13 files changed, 1 insertion(+), 3295 deletions(-) delete mode 100644 board/ti/omap5912osk/Kconfig delete mode 100644 board/ti/omap5912osk/MAINTAINERS delete mode 100644 board/ti/omap5912osk/Makefile delete mode 100644 board/ti/omap5912osk/config.mk delete mode 100644 board/ti/omap5912osk/lowlevel_init.S delete mode 100644 board/ti/omap5912osk/omap5912osk.c delete mode 100644 configs/omap5912osk_defconfig delete mode 100644 drivers/usb/gadget/omap1510_udc.c delete mode 100644 include/configs/omap1510.h delete mode 100644 include/configs/omap5912osk.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e385eda..e97f94d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -287,9 +287,6 @@ config TARGET_SC_SPS_1 config TARGET_NHK8815 bool "Support nhk8815"

-config TARGET_OMAP5912OSK - bool "Support omap5912osk" - config TARGET_EDMINIV2 bool "Support edminiv2"

@@ -977,7 +974,6 @@ source "board/ti/beagle/Kconfig" source "board/ti/dra7xx/Kconfig" source "board/ti/evm/Kconfig" source "board/ti/ks2_evm/Kconfig" -source "board/ti/omap5912osk/Kconfig" source "board/ti/omap5_uevm/Kconfig" source "board/ti/panda/Kconfig" source "board/ti/sdp3430/Kconfig" diff --git a/board/ti/omap5912osk/Kconfig b/board/ti/omap5912osk/Kconfig deleted file mode 100644 index 9f7493a..0000000 --- a/board/ti/omap5912osk/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if TARGET_OMAP5912OSK - -config SYS_CPU - string - default "arm926ejs" - -config SYS_BOARD - string - default "omap5912osk" - -config SYS_VENDOR - string - default "ti" - -config SYS_SOC - string - default "omap" - -config SYS_CONFIG_NAME - string - default "omap5912osk" - -endif diff --git a/board/ti/omap5912osk/MAINTAINERS b/board/ti/omap5912osk/MAINTAINERS deleted file mode 100644 index 43ffb9b..0000000 --- a/board/ti/omap5912osk/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -OMAP5912OSK BOARD -M: Rishi Bhattacharya rishi@ti.com -S: Maintained -F: board/ti/omap5912osk/ -F: include/configs/omap5912osk.h -F: configs/omap5912osk_defconfig diff --git a/board/ti/omap5912osk/Makefile b/board/ti/omap5912osk/Makefile deleted file mode 100644 index d7c0ebd..0000000 --- a/board/ti/omap5912osk/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := omap5912osk.o -obj-y += lowlevel_init.o diff --git a/board/ti/omap5912osk/config.mk b/board/ti/omap5912osk/config.mk deleted file mode 100644 index 5b8d952..0000000 --- a/board/ti/omap5912osk/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# (C) Copyright 2002-2004 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Kshitij Gupta Kshitij@ti.com -# -# (C) Copyright 2004 -# Texas Instruments, <www.ti.com> -# Rishi Bhattacharya rishi@ti.com -# -# TI OSK board with OMAP5912 (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# OSK has 1 bank of 32 MB SDRAM -# Physical Address: -# 1000'0000 to 1200'0000 -# -# -# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 -# (mem base + reserved) -# -# When running from RAM use address 1108'0000, otherwise when -# booting from NOR flash link to address 0000'0000. -# - -CONFIG_SYS_TEXT_BASE = 0x00000000 -#CONFIG_SYS_TEXT_BASE = 0x11080000 diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S deleted file mode 100644 index e05a1c7..0000000 --- a/board/ti/omap5912osk/lowlevel_init.S +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta Kshitij@ti.com - * - * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 - * - * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004 - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_OMAP1610) -#include <./configs/omap1510.h> -#endif - -.globl lowlevel_init -lowlevel_init: - - /*------------------------------------------------------* - * Ensure i-cache is enabled * - * To configure TC regs without fetching instruction * - *------------------------------------------------------*/ - mrc p15, 0, r0, c1, c0 - orr r0, r0, #0x1000 - mcr p15, 0, r0, c1, c0 - - /*------------------------------------------------------* - *mask all IRQs by setting all bits in the INTMR default* - *------------------------------------------------------*/ - mov r1, #0xffffffff - ldr r0, =REG_IHL1_MIR - str r1, [r0] - ldr r0, =REG_IHL2_MIR - str r1, [r0] - - /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT1) * - *------------------------------------------------------*/ - ldr r0, REG_ARM_IDLECT1 - ldr r1, VAL_ARM_IDLECT1 - str r1, [r0] - - /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT2) * - *------------------------------------------------------*/ - ldr r0, REG_ARM_IDLECT2 - ldr r1, VAL_ARM_IDLECT2 - str r1, [r0] - - /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT3) * - *------------------------------------------------------*/ - ldr r0, REG_ARM_IDLECT3 - ldr r1, VAL_ARM_IDLECT3 - str r1, [r0] - - mov r1, #0x01 /* PER_EN bit */ - ldr r0, REG_ARM_RSTCT2 - strh r1, [r0] /* CLKM; Peripheral reset. */ - - /* Set CLKM to Sync-Scalable */ - mov r1, #0x1000 - ldr r0, REG_ARM_SYSST - - mov r2, #0 -1: cmp r2, #1 - streqh r1, [r0] - add r2, r2, #1 - cmp r2, #0x100 /* wait for any bubbles to finish */ - bne 1b - - ldr r1, VAL_ARM_CKCTL - ldr r0, REG_ARM_CKCTL - strh r1, [r0] - - /* a few nops to let settle */ - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop - - /* setup DPLL 1 */ - /* Ramp up the clock to 96Mhz */ - ldr r1, VAL_DPLL1_CTL - ldr r0, REG_DPLL1_CTL - strh r1, [r0] - ands r1, r1, #0x10 /* Check if PLL is enabled. */ - beq lock_end /* Do not look for lock if BYPASS selected */ -2: - ldrh r1, [r0] - ands r1, r1, #0x01 /* Check the LOCK bit.*/ - beq 2b /* loop until bit goes hi. */ -lock_end: - - /*------------------------------------------------------* - * Turn off the watchdog during init... * - *------------------------------------------------------*/ - ldr r0, REG_WATCHDOG - ldr r1, WATCHDOG_VAL1 - str r1, [r0] - ldr r1, WATCHDOG_VAL2 - str r1, [r0] - ldr r0, REG_WSPRDOG - ldr r1, WSPRDOG_VAL1 - str r1, [r0] - ldr r0, REG_WWPSDOG - -watch1Wait: - ldr r1, [r0] - tst r1, #0x10 - bne watch1Wait - - ldr r0, REG_WSPRDOG - ldr r1, WSPRDOG_VAL2 - str r1, [r0] - ldr r0, REG_WWPSDOG -watch2Wait: - ldr r1, [r0] - tst r1, #0x10 - bne watch2Wait - - /* Set memory timings corresponding to the new clock speed */ - ldr r3, VAL_SDRAM_CONFIG_SDF0 - - /* Check execution location to determine current execution location - * and branch to appropriate initialization code. - */ - mov r0, #0x10000000 /* Load physical SDRAM base. */ - mov r1, pc /* Get current execution location. */ - cmp r1, r0 /* Compare. */ - bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */ - - /* identify the device revision, -- TMX or TMP(TMS) */ - ldr r0, REG_DEVICE_ID - ldr r1, [r0] - - ldr r0, VAL_DEVICE_ID_TMP - mov r1, r1, lsl #15 - mov r1, r1, lsr #16 - cmp r0, r1 - bne skip_TMP_Patch - - /* Enable TMP/TMS device new features */ - mov r0, #1 - ldr r1, REG_TC_EMIFF_DOUBLER - str r0, [r1] - - /* Enable new ac parameters */ - mov r0, #0x0b - ldr r1, REG_SDRAM_CONFIG2 - str r0, [r1] - - ldr r3, VAL_SDRAM_CONFIG_SDF1 - -skip_TMP_Patch: - - /* - * Delay for SDRAM initialization. - */ - mov r0, #0x1800 /* value should be checked */ -3: - subs r0, r0, #0x1 /* Decrement count */ - bne 3b - - /* - * Set SDRAM control values. Disable refresh before MRS command. - */ - - /* mobile ddr operation */ - ldr r0, REG_SDRAM_OPERATION - mov r2, #07 - str r2, [r0] - - /* config register */ - ldr r0, REG_SDRAM_CONFIG - str r3, [r0] - - /* manual command register */ - ldr r0, REG_SDRAM_MANUAL_CMD - - /* issue set cke high */ - mov r1, #CMD_SDRAM_CKE_SET_HIGH - str r1, [r0] - - /* issue nop */ - mov r1, #CMD_SDRAM_NOP - str r1, [r0] - - mov r2, #0x0100 -waitMDDR1: - subs r2, r2, #1 - bne waitMDDR1 /* delay loop */ - - /* issue precharge */ - mov r1, #CMD_SDRAM_PRECHARGE - str r1, [r0] - - /* issue autorefresh x 2 */ - mov r1, #CMD_SDRAM_AUTOREFRESH - str r1, [r0] - str r1, [r0] - - /* mrs register ddr mobile */ - ldr r0, REG_SDRAM_MRS - mov r1, #0x33 - str r1, [r0] - - /* emrs1 low-power register */ - ldr r0, REG_SDRAM_EMRS1 - /* self refresh on all banks */ - mov r1, #0 - str r1, [r0] - - ldr r0, REG_DLL_URD_CONTROL - ldr r1, DLL_URD_CONTROL_VAL - str r1, [r0] - - ldr r0, REG_DLL_LRD_CONTROL - ldr r1, DLL_LRD_CONTROL_VAL - str r1, [r0] - - ldr r0, REG_DLL_WRT_CONTROL - ldr r1, DLL_WRT_CONTROL_VAL - str r1, [r0] - - /* delay loop */ - mov r0, #0x0100 -waitMDDR2: - subs r0, r0, #1 - bne waitMDDR2 - - /* - * Delay for SDRAM initialization. - */ - mov r0, #0x1800 -4: - subs r0, r0, #1 /* Decrement count. */ - bne 4b - b common_tc - -skip_sdram: - ldr r0, REG_SDRAM_CONFIG - str r3, [r0] - -common_tc: - /* slow interface */ - ldr r1, VAL_TC_EMIFS_CS0_CONFIG - ldr r0, REG_TC_EMIFS_CS0_CONFIG - str r1, [r0] /* Chip Select 0 */ - - ldr r1, VAL_TC_EMIFS_CS1_CONFIG - ldr r0, REG_TC_EMIFS_CS1_CONFIG - str r1, [r0] /* Chip Select 1 */ - - ldr r1, VAL_TC_EMIFS_CS3_CONFIG - ldr r0, REG_TC_EMIFS_CS3_CONFIG - str r1, [r0] /* Chip Select 3 */ - - ldr r1, VAL_TC_EMIFS_DWS - ldr r0, REG_TC_EMIFS_DWS - str r1, [r0] /* Enable EMIFS.RDY for CS1 (ether) */ - -#ifdef CONFIG_H2_OMAP1610 - /* inserting additional 2 clock cycle hold time for LAN */ - ldr r0, REG_TC_EMIFS_CS1_ADVANCED - ldr r1, VAL_TC_EMIFS_CS1_ADVANCED - str r1, [r0] -#endif - /* Start MPU Timer 1 */ - ldr r0, REG_MPU_LOAD_TIMER - ldr r1, VAL_MPU_LOAD_TIMER - str r1, [r0] - - ldr r0, REG_MPU_CNTL_TIMER - ldr r1, VAL_MPU_CNTL_TIMER - str r1, [r0] - - /* - * Setup a temporary stack - */ - ldr sp, SRAM_STACK - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - - /* - * Save the old lr(passed in ip) and the current lr to stack - */ - push {ip, lr} - - /* - * go setup pll, mux, memory - */ - bl s_init - pop {ip, pc} - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -REG_DEVICE_ID: /* 32 bits */ - .word 0xfffe2004 -REG_TC_EMIFS_CONFIG: - .word 0xfffecc0c -REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ - .word 0xfffecc10 -REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ - .word 0xfffecc14 -REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ - .word 0xfffecc18 -REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ - .word 0xfffecc1c -REG_TC_EMIFS_DWS: /* 32 bits */ - .word 0xfffecc40 -#ifdef CONFIG_H2_OMAP1610 -REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */ - .word 0xfffecc54 -#endif - -/* MPU clock/reset/power mode control registers */ -REG_ARM_CKCTL: /* 16 bits */ - .word 0xfffece00 -REG_ARM_IDLECT3: /* 16 bits */ - .word 0xfffece24 -REG_ARM_IDLECT2: /* 16 bits */ - .word 0xfffece08 -REG_ARM_IDLECT1: /* 16 bits */ - .word 0xfffece04 -REG_ARM_RSTCT2: /* 16 bits */ - .word 0xfffece14 -REG_ARM_SYSST: /* 16 bits */ - .word 0xfffece18 - -/* DPLL control registers */ -REG_DPLL1_CTL: /* 16 bits */ - .word 0xfffecf00 - -/* Watch Dog register */ -/* secure watchdog stop */ -REG_WSPRDOG: - .word 0xfffeb048 -/* watchdog write pending */ -REG_WWPSDOG: - .word 0xfffeb034 - -WSPRDOG_VAL1: - .word 0x0000aaaa -WSPRDOG_VAL2: - .word 0x00005555 - -/* SDRAM config is: auto refresh enabled, 16 bit 4 bank, - counter @8192 rows, 10 ns, 8 burst */ -REG_SDRAM_CONFIG: - .word 0xfffecc20 -REG_SDRAM_CONFIG2: - .word 0xfffecc3c -REG_TC_EMIFF_DOUBLER: /* 32 bits */ - .word 0xfffecc60 - -/* Operation register */ -REG_SDRAM_OPERATION: - .word 0xfffecc80 - -/* Manual command register */ -REG_SDRAM_MANUAL_CMD: - .word 0xfffecc84 - -/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ -REG_SDRAM_MRS: - .word 0xfffecc70 - -/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ -REG_SDRAM_EMRS1: - .word 0xfffecc78 - -/* WRT DLL register */ -REG_DLL_WRT_CONTROL: - .word 0xfffecc68 -DLL_WRT_CONTROL_VAL: - .word 0x03f00002 /* Phase of 72deg, write offset +31 */ - -/* URD DLL register */ -REG_DLL_URD_CONTROL: - .word 0xfffeccc0 -DLL_URD_CONTROL_VAL: - .word 0x00800002 /* Phase of 72deg, read offset +31 */ - -/* LRD DLL register */ -REG_DLL_LRD_CONTROL: - .word 0xfffecccc -DLL_LRD_CONTROL_VAL: - .word 0x00800002 /* read offset +31 */ - -REG_WATCHDOG: - .word 0xfffec808 -WATCHDOG_VAL1: - .word 0x000000f5 -WATCHDOG_VAL2: - .word 0x000000a0 - -REG_MPU_LOAD_TIMER: - .word 0xfffec504 -REG_MPU_CNTL_TIMER: - .word 0xfffec500 -VAL_MPU_LOAD_TIMER: - .word 0xffffffff -VAL_MPU_CNTL_TIMER: - .word 0xffffffa1 - -/* 96 MHz Samsung Mobile DDR */ -/* Original setting for TMX device */ -VAL_SDRAM_CONFIG_SDF0: - .word 0x0014e6fe - -/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */ -VAL_SDRAM_CONFIG_SDF1: - .word 0x0114e6fe - -VAL_ARM_CKCTL: - .word 0x2000 /* was: 0x3000, now use CLK_REF for timer input */ -VAL_DPLL1_CTL: - .word 0x2830 - -#ifdef CONFIG_OSK_OMAP5912 -VAL_TC_EMIFS_CS0_CONFIG: - .word 0x002130b0 -VAL_TC_EMIFS_CS1_CONFIG: - .word 0x00001133 -VAL_TC_EMIFS_CS2_CONFIG: - .word 0x000055f0 -VAL_TC_EMIFS_CS3_CONFIG: - .word 0x88013141 -VAL_TC_EMIFS_DWS: /* Enable EMIFS.RDY for CS1 access (ether) */ - .word 0x000000c0 -VAL_DEVICE_ID_TMP: /* TMP/TMS=0xb65f, TMX=0xb58c */ - .word 0xb65f -#endif - -#ifdef CONFIG_H2_OMAP1610 -VAL_TC_EMIFS_CS0_CONFIG: - .word 0x00203331 -VAL_TC_EMIFS_CS1_CONFIG: - .word 0x8180fff3 -VAL_TC_EMIFS_CS2_CONFIG: - .word 0xf800f22a -VAL_TC_EMIFS_CS3_CONFIG: - .word 0x88013141 -VAL_TC_EMIFS_CS1_ADVANCED: - .word 0x00000022 -#endif - -VAL_ARM_IDLECT1: - .word 0x00000400 -VAL_ARM_IDLECT2: - .word 0x00000886 -VAL_ARM_IDLECT3: - .word 0x00000015 - -SRAM_STACK: - .word CONFIG_SYS_INIT_SP_ADDR - -/* command values */ -.equ CMD_SDRAM_NOP, 0x00000000 -.equ CMD_SDRAM_PRECHARGE, 0x00000001 -.equ CMD_SDRAM_AUTOREFRESH, 0x00000002 -.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007 diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c deleted file mode 100644 index 88a7310..0000000 --- a/board/ti/omap5912osk/omap5912osk.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta Kshitij@ti.com - * - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Rishi Bhattacharya rishi@ti.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#if defined(CONFIG_OMAP1610) -#include <./configs/omap1510.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -void flash__init (void); -void ether__init (void); -void set_muxconf_regs (void); -void peripheral_power_enable (void); - -#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - flash__init(); - ether__init(); - - return 0; -} - -void s_init(void) -{ - /* Configure MUX settings */ - set_muxconf_regs (); - peripheral_power_enable (); - -/* this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable (); -} - -/****************************** - Routine: - Description: -******************************/ -void flash__init (void) -{ -#define EMIFS_GlB_Config_REG 0xfffecc0c - unsigned int regval; - regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); - /* Turn off write protection for flash devices. */ - regval = regval | 0x0001; - *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; -} -/************************************************************* - Routine:ether__init - Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. -*************************************************************/ -void ether__init (void) -{ -#define ETH_CONTROL_REG 0x0480000b - int i; - - *((volatile unsigned short *) 0xfffece08) = 0x03FF; - *((volatile unsigned short *) 0xfffb3824) = 0x8000; - *((volatile unsigned short *) 0xfffb3830) = 0x0000; - *((volatile unsigned short *) 0xfffb3834) = 0x0009; - *((volatile unsigned short *) 0xfffb3838) = 0x0009; - *((volatile unsigned short *) 0xfffb3818) = 0x0002; - *((volatile unsigned short *) 0xfffb382C) = 0x0048; - *((volatile unsigned short *) 0xfffb3824) = 0x8603; - udelay (3); - for (i=0;i<2000;i++); - *((volatile unsigned short *) 0xfffb381C) = 0x6610; - udelay (30); - for (i=0;i<10000;i++); - - *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; - udelay (3); - - -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -/****************************************************** - Routine: set_muxconf_regs - Description: Setting up the configuration Mux registers - specific to the hardware -*******************************************************/ -void set_muxconf_regs (void) -{ - volatile unsigned int *MuxConfReg; - /* set each registers to its reset value; */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0); - /* setup for UART1 */ - *MuxConfReg &= ~(0x02000000); /* bit 25 */ - /* setup for UART2 */ - *MuxConfReg &= ~(0x01000000); /* bit 24 */ - /* Disable Uwire CS Hi-Z */ - *MuxConfReg |= 0x08000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6); - /*setup mux for UART3 */ - *MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */ - *MuxConfReg &= ~0x0000003e; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8); - /* Disable Uwire CS Hi-Z */ - *MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9); - /* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */ - /* hardware will actually use TX and RTS based on bit 25 in */ - /* FUNC_MUX_CTRL_0. I told you this thing was screwy! */ - *MuxConfReg |= 0x00201000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C); - /* setup for UART2 */ - /* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */ - /* hardware will actually use TX and RTS based on bit 24 in */ - /* FUNC_MUX_CTRL_0. */ - *MuxConfReg |= 0x09000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_D); - *MuxConfReg |= 0x00000020; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1); - *MuxConfReg = 0x00000000; - /* mux setup for SD/MMC driver */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2); - *MuxConfReg &= 0xFFFE0FFF; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); - /* bit 13 for MMC2 XOR_CLK */ - *MuxConfReg &= ~(0x00002000); - /* bit 29 for UART 1 */ - *MuxConfReg &= ~(0x00002000); - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0); - /* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */ - *MuxConfReg |= 0x000C0000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL); - *MuxConfReg &= ~(0x00000070); - *MuxConfReg &= ~(0x00000008); - *MuxConfReg |= 0x00000003; - *MuxConfReg |= 0x00000180; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); - /* bit 17, software controls VBUS */ - *MuxConfReg &= ~(0x00020000); - /* Enable USB 48 and 12M clocks */ - *MuxConfReg |= 0x00000200; - *MuxConfReg &= ~(0x00000180); - /*2.75V for MMCSDIO1 */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0); - *MuxConfReg = 0x00001FE7; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_0); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_1); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_3); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_4); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4); - *MuxConfReg = 0x00000000; - /* Turn on UART2 48 MHZ clock */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); - *MuxConfReg |= 0x40000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) USB_OTG_CTRL); - /* setup for USB VBus detection OMAP161x */ - *MuxConfReg |= 0x00040000; /* bit 18 */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2); - /* PullUps for SD/MMC driver */ - *MuxConfReg |= ~(0xFFFE0FFF); - MuxConfReg = - (volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0); - *MuxConfReg = COMP_MODE_ENABLE; -} - -/****************************************************** - Routine: peripheral_power_enable - Description: Enable the power for UART1 -*******************************************************/ -void peripheral_power_enable (void) -{ -#define UART1_48MHZ_ENABLE ((unsigned short)0x0200) -#define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834) - - *SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE; -} - -/* - * Check Board Identity - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: OSK5912"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif diff --git a/configs/omap5912osk_defconfig b/configs/omap5912osk_defconfig deleted file mode 100644 index 5aeb097..0000000 --- a/configs/omap5912osk_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_OMAP5912OSK=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index b950a41..6f28ab0 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +omap5912osk arm arm926ejs - - Rishi Bhattacharya rishi@ti.com p1023rds powerpc mpc85xx d0bc5140 2014-07-22 Roy Zang tie-fei.zang@freescale.com spc1920 powerpc mpc8xx 98ad54be 2014-07-07 v37 powerpc mpc8xx b8c1438a 2014-07-07 diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 4eea907..2efd5a4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -31,7 +31,6 @@ ifdef CONFIG_USB_DEVICE obj-y += core.o obj-y += ep0.o obj-$(CONFIG_DW_UDC) += designware_udc.o -obj-$(CONFIG_OMAP1610) += omap1510_udc.o obj-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o obj-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o endif diff --git a/drivers/usb/gadget/omap1510_udc.c b/drivers/usb/gadget/omap1510_udc.c deleted file mode 100644 index 959df8c..0000000 --- a/drivers/usb/gadget/omap1510_udc.c +++ /dev/null @@ -1,1506 +0,0 @@ -/* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * - * Based on - * linux/drivers/usb/device/bi/omap.c - * TI OMAP1510 USB bus interface driver - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * (C) Copyright 2002 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <usbdevice.h> -#include <usb/omap1510_udc.h> -#include <usb/udc.h> - -#include "ep0.h" - - -#define UDC_INIT_MDELAY 80 /* Device settle delay */ -#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */ - -/* Some kind of debugging output... */ -#if 1 -#define UDCDBG(str) -#define UDCDBGA(fmt,args...) -#else /* The bugs still exists... */ -#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__) -#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args) -#endif - -#if 1 -#define UDCREG(name) -#define UDCREGL(name) -#else /* The bugs still exists... */ -#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */ -#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */ -#endif - - -static struct urb *ep0_urb = NULL; - -static struct usb_device_instance *udc_device; /* Used in interrupt handler */ -static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */ -static u32 udc_interrupts = 0; - -static void udc_stall_ep (unsigned int ep_addr); - - -static struct usb_endpoint_instance *omap1510_find_ep (int ep) -{ - int i; - - for (i = 0; i < udc_device->bus->max_endpoints; i++) { - if (udc_device->bus->endpoint_array[i].endpoint_address == ep) - return &udc_device->bus->endpoint_array[i]; - } - return NULL; -} - -/* ************************************************************************** */ -/* IO - */ - -/* - * omap1510_prepare_endpoint_for_rx - * - * This function implements TRM Figure 14-11. - * - * The endpoint to prepare for transfer is specified as a physical endpoint - * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint - * configuration register is checked to see if the endpoint is ISO or not. - * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled. - * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30. - */ -static void omap1510_prepare_endpoint_for_rx (int ep_addr) -{ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr); - if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) { - if ((inw (UDC_EP_RX (ep_num)) & - (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) == - UDC_EPn_RX_Valid) { - /* rx endpoint is valid, non-ISO, so enable its FIFO */ - outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); - outw (UDC_Set_FIFO_En, UDC_CTRL); - outw (0, UDC_EP_NUM); - } - } -} - -/* omap1510_configure_endpoints - * - * This function implements TRM Figure 14-10. - */ -static void omap1510_configure_endpoints (struct usb_device_instance *device) -{ - int ep; - struct usb_bus_instance *bus; - struct usb_endpoint_instance *endpoint; - unsigned short ep_ptr; - unsigned short ep_size; - unsigned short ep_isoc; - unsigned short ep_doublebuffer; - int ep_addr; - int packet_size; - int buffer_size; - int attributes; - - bus = device->bus; - - /* There is a dedicated 2048 byte buffer for USB packets that may be - * arbitrarily partitioned among the endpoints on 8-byte boundaries. - * The first 8 bytes are reserved for receiving setup packets on - * endpoint 0. - */ - ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */ - - for (ep = 0; ep < bus->max_endpoints; ep++) { - endpoint = bus->endpoint_array + ep; - ep_addr = endpoint->endpoint_address; - if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* IN endpoint */ - packet_size = endpoint->tx_packetSize; - attributes = endpoint->tx_attributes; - } else { - /* OUT endpoint */ - packet_size = endpoint->rcv_packetSize; - attributes = endpoint->rcv_attributes; - } - - switch (packet_size) { - case 0: - ep_size = 0; - break; - case 8: - ep_size = 0; - break; - case 16: - ep_size = 1; - break; - case 32: - ep_size = 2; - break; - case 64: - ep_size = 3; - break; - case 128: - ep_size = 4; - break; - case 256: - ep_size = 5; - break; - case 512: - ep_size = 6; - break; - default: - UDCDBGA ("ep 0x%02x has bad packet size %d", - ep_addr, packet_size); - packet_size = 0; - ep_size = 0; - break; - } - - switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - default: - /* A non-isochronous endpoint may optionally be - * double-buffered. For now we disable - * double-buffering. - */ - ep_doublebuffer = 0; - ep_isoc = 0; - if (packet_size > 64) - packet_size = 0; - if (!ep || !ep_doublebuffer) - buffer_size = packet_size; - else - buffer_size = packet_size * 2; - break; - case USB_ENDPOINT_XFER_ISOC: - /* Isochronous endpoints are always double- - * buffered, but the double-buffering bit - * in the endpoint configuration register - * becomes the msb of the endpoint size so we - * set the double-buffering flag to zero. - */ - ep_doublebuffer = 0; - ep_isoc = 1; - buffer_size = packet_size * 2; - break; - } - - /* check to see if our packet buffer RAM is exhausted */ - if ((ep_ptr + buffer_size) > 2048) { - UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size); - buffer_size = packet_size = 0; - } - - /* force a default configuration for endpoint 0 since it is - * always enabled - */ - if (!ep && ((packet_size < 8) || (packet_size > 64))) { - buffer_size = packet_size = 64; - ep_size = 3; - } - - if (!ep) { - /* configure endpoint 0 */ - outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0); - /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */ - /* ep_ptr, packet_size); */ - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* IN endpoint */ - if (packet_size) { - outw ((1 << 15) | (ep_doublebuffer << 14) | - (ep_size << 12) | (ep_isoc << 11) | - (ep_ptr >> 3), - UDC_EP_TX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - UDCDBGA ("IN ep %d buffer offset 0x%03x" - " packet size 0x%03x", - ep_addr & USB_ENDPOINT_NUMBER_MASK, - ep_ptr, packet_size); - } else { - outw (0, - UDC_EP_TX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - } - } else { - /* OUT endpoint */ - if (packet_size) { - outw ((1 << 15) | (ep_doublebuffer << 14) | - (ep_size << 12) | (ep_isoc << 11) | - (ep_ptr >> 3), - UDC_EP_RX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - UDCDBGA ("OUT ep %d buffer offset 0x%03x" - " packet size 0x%03x", - ep_addr & USB_ENDPOINT_NUMBER_MASK, - ep_ptr, packet_size); - } else { - outw (0, - UDC_EP_RX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - } - } - ep_ptr += buffer_size; - } -} - -/* omap1510_deconfigure_device - * - * This function balances omap1510_configure_device. - */ -static void omap1510_deconfigure_device (void) -{ - int epnum; - - UDCDBG ("clear Cfg_Lock"); - outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1); - UDCREG (UDC_SYSCON1); - - /* deconfigure all endpoints */ - for (epnum = 1; epnum <= 15; epnum++) { - outw (0, UDC_EP_RX (epnum)); - outw (0, UDC_EP_TX (epnum)); - } -} - -/* omap1510_configure_device - * - * This function implements TRM Figure 14-9. - */ -static void omap1510_configure_device (struct usb_device_instance *device) -{ - omap1510_configure_endpoints (device); - - - /* Figure 14-9 indicates we should enable interrupts here, but we have - * other routines (udc_all_interrupts, udc_suspended_interrupts) to - * do that. - */ - - UDCDBG ("set Cfg_Lock"); - outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1); - UDCREG (UDC_SYSCON1); -} - -/* omap1510_write_noniso_tx_fifo - * - * This function implements TRM Figure 14-30. - * - * If the endpoint has an active tx_urb, then the next packet of data from the - * URB is written to the tx FIFO. The total amount of data in the urb is given - * by urb->actual_length. The maximum amount of data that can be sent in any - * one packet is given by endpoint->tx_packetSize. The number of data bytes - * from this URB that have already been transmitted is given by endpoint->sent. - * endpoint->last is updated by this routine with the number of data bytes - * transmitted in this packet. - * - * In accordance with Figure 14-30, the EP_NUM register must already have been - * written with the value to select the appropriate tx FIFO before this routine - * is called. - */ -static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance - *endpoint) -{ - struct urb *urb = endpoint->tx_urb; - - if (urb) { - unsigned int last, i; - - UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d", - urb->buffer, urb->buffer_length, urb->actual_length); - if ((last = - MIN (urb->actual_length - endpoint->sent, - endpoint->tx_packetSize))) { - u8 *cp = urb->buffer + endpoint->sent; - - UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); - - if (((u32) cp & 1) == 0) { /* word aligned? */ - outsw (UDC_DATA, cp, last >> 1); - } else { /* byte aligned. */ - for (i = 0; i < (last >> 1); i++) { - u16 w = ((u16) cp[2 * i + 1] << 8) | - (u16) cp[2 * i]; - outw (w, UDC_DATA); - } - } - if (last & 1) { - outb (*(cp + last - 1), UDC_DATA); - } - } - endpoint->last = last; - } -} - -/* omap1510_read_noniso_rx_fifo - * - * This function implements TRM Figure 14-28. - * - * If the endpoint has an active rcv_urb, then the next packet of data is read - * from the rcv FIFO and written to rcv_urb->buffer at offset - * rcv_urb->actual_length to append the packet data to the data from any - * previous packets for this transfer. We assume that there is sufficient room - * left in the buffer to hold an entire packet of data. - * - * The return value is the number of bytes read from the FIFO for this packet. - * - * In accordance with Figure 14-28, the EP_NUM register must already have been - * written with the value to select the appropriate rcv FIFO before this routine - * is called. - */ -static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance - *endpoint) -{ - struct urb *urb = endpoint->rcv_urb; - int len = 0; - - if (urb) { - len = inw (UDC_RXFSTAT); - - if (len) { - unsigned char *cp = urb->buffer + urb->actual_length; - - insw (UDC_DATA, cp, len >> 1); - if (len & 1) - *(cp + len - 1) = inb (UDC_DATA); - } - } - return len; -} - -/* omap1510_prepare_for_control_write_status - * - * This function implements TRM Figure 14-17. - * - * We have to deal here with non-autodecoded control writes that haven't already - * been dealt with by ep0_recv_setup. The non-autodecoded standard control - * write requests are: set/clear endpoint feature, set configuration, set - * interface, and set descriptor. ep0_recv_setup handles set/clear requests for - * ENDPOINT_HALT by halting the endpoint for a set request and resetting the - * endpoint for a clear request. ep0_recv_setup returns an error for - * SET_DESCRIPTOR requests which causes them to be terminated with a stall by - * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by - * generating a DEVICE_SET_INTERFACE event. This leaves only the - * SET_CONFIGURATION event for us to deal with here. - * - */ -static void omap1510_prepare_for_control_write_status (struct urb *urb) -{ - struct usb_device_request *request = &urb->device_request;; - - /* check for a SET_CONFIGURATION request */ - if (request->bRequest == USB_REQ_SET_CONFIGURATION) { - int configuration = le16_to_cpu (request->wValue) & 0xff; - unsigned short devstat = inw (UDC_DEVSTAT); - - if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) { - /* device is currently in ADDRESSED state */ - if (configuration) { - /* Assume the specified non-zero configuration - * value is valid and switch to the CONFIGURED - * state. - */ - outw (UDC_Dev_Cfg, UDC_SYSCON2); - } - } else if ((devstat & UDC_CFG) == UDC_CFG) { - /* device is currently in CONFIGURED state */ - if (!configuration) { - /* Switch to ADDRESSED state. */ - outw (UDC_Clr_Cfg, UDC_SYSCON2); - } - } - } - - /* select EP0 tx FIFO */ - outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - /* clear endpoint (no data bytes in status stage) */ - outw (UDC_Clr_EP, UDC_CTRL); - /* enable the EP0 tx FIFO */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the endpoint */ - outw (UDC_EP_Dir, UDC_EP_NUM); -} - -/* udc_state_transition_up - * udc_state_transition_down - * - * Helper functions to implement device state changes. The device states and - * the events that transition between them are: - * - * STATE_ATTACHED - * || /\ - * / || - * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET - * || /\ - * / || - * STATE_POWERED - * || /\ - * / || - * DEVICE_RESET DEVICE_POWER_INTERRUPTION - * || /\ - * / || - * STATE_DEFAULT - * || /\ - * / || - * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET - * || /\ - * / || - * STATE_ADDRESSED - * || /\ - * / || - * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED - * || /\ - * / || - * STATE_CONFIGURED - * - * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED - * to STATE_CONFIGURED) from the specified initial state to the specified final - * state, passing through each intermediate state on the way. If the initial - * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then - * no state transitions will take place. - * - * udc_state_transition_down transitions down (in the direction from - * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the - * specified final state, passing through each intermediate state on the way. - * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final - * state, then no state transitions will take place. - * - * These functions must only be called with interrupts disabled. - */ -static void udc_state_transition_up (usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial < final) { - switch (initial) { - case STATE_ATTACHED: - usbd_device_event_irq (udc_device, - DEVICE_HUB_CONFIGURED, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq (udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq (udc_device, - DEVICE_ADDRESS_ASSIGNED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, - 0); - case STATE_CONFIGURED: - break; - default: - break; - } - } -} - -static void udc_state_transition_down (usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial > final) { - switch (initial) { - case STATE_CONFIGURED: - usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq (udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0); - case STATE_ATTACHED: - break; - default: - break; - } - } -} - -/* Handle all device state changes. - * This function implements TRM Figure 14-21. - */ -static void omap1510_udc_state_changed (void) -{ - u16 bits; - u16 devstat = inw (UDC_DEVSTAT); - - UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat); - - bits = devstat ^ udc_devstat; - if (bits) { - if (bits & UDC_ATT) { - if (devstat & UDC_ATT) { - UDCDBG ("device attached and powered"); - udc_state_transition_up (udc_device->device_state, STATE_POWERED); - } else { - UDCDBG ("device detached or unpowered"); - udc_state_transition_down (udc_device->device_state, STATE_ATTACHED); - } - } - if (bits & UDC_USB_Reset) { - if (devstat & UDC_USB_Reset) { - UDCDBG ("device reset in progess"); - udc_state_transition_down (udc_device->device_state, STATE_POWERED); - } else { - UDCDBG ("device reset completed"); - } - } - if (bits & UDC_DEF) { - if (devstat & UDC_DEF) { - UDCDBG ("device entering default state"); - udc_state_transition_up (udc_device->device_state, STATE_DEFAULT); - } else { - UDCDBG ("device leaving default state"); - udc_state_transition_down (udc_device->device_state, STATE_POWERED); - } - } - if (bits & UDC_SUS) { - if (devstat & UDC_SUS) { - UDCDBG ("entering suspended state"); - usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0); - } else { - UDCDBG ("leaving suspended state"); - usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0); - } - } - if (bits & UDC_R_WK_OK) { - UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK) - ? "enabled" : "disabled"); - } - if (bits & UDC_ADD) { - if (devstat & UDC_ADD) { - UDCDBG ("default -> addressed"); - udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED); - } else { - UDCDBG ("addressed -> default"); - udc_state_transition_down (udc_device->device_state, STATE_DEFAULT); - } - } - if (bits & UDC_CFG) { - if (devstat & UDC_CFG) { - UDCDBG ("device configured"); - /* The ep0_recv_setup function generates the - * DEVICE_CONFIGURED event when a - * USB_REQ_SET_CONFIGURATION setup packet is - * received, so we should already be in the - * state STATE_CONFIGURED. - */ - udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED); - } else { - UDCDBG ("device deconfigured"); - udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED); - } - } - } - - /* Clear interrupt source */ - outw (UDC_DS_Chg, UDC_IRQ_SRC); - - /* Save current DEVSTAT */ - udc_devstat = devstat; -} - -/* Handle SETUP USB interrupt. - * This function implements TRM Figure 14-14. - */ -static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint) -{ - UDCDBG ("-> Entering device setup"); - - do { - const int setup_pktsize = 8; - unsigned char *datap = - (unsigned char *) &ep0_urb->device_request; - - /* Gain access to EP 0 setup FIFO */ - outw (UDC_Setup_Sel, UDC_EP_NUM); - - /* Read control request data */ - insb (UDC_DATA, datap, setup_pktsize); - - UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]", - *(datap + 0), *(datap + 1), *(datap + 2), - *(datap + 3), *(datap + 4), *(datap + 5), - *(datap + 6), *(datap + 7)); - - /* Reset EP0 setup FIFO */ - outw (0, UDC_EP_NUM); - } while (inw (UDC_IRQ_SRC) & UDC_Setup); - - /* Try to process setup packet */ - if (ep0_recv_setup (ep0_urb)) { - /* Not a setup packet, stall next EP0 transaction */ - udc_stall_ep (0); - UDCDBG ("can't parse setup packet, still waiting for setup"); - return; - } - - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) - == USB_REQ_HOST2DEVICE) { - UDCDBG ("control write on EP0"); - if (le16_to_cpu (ep0_urb->device_request.wLength)) { - /* We don't support control write data stages. - * The only standard control write request with a data - * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't - * support that so we just stall those requests. A - * function driver might support a non-standard - * write request with a data stage, but it isn't - * obvious what we would do with the data if we read it - * so we'll just stall it. It seems like the API isn't - * quite right here. - */ -#if 0 - /* Here is what we would do if we did support control - * write data stages. - */ - ep0_urb->actual_length = 0; - outw (0, UDC_EP_NUM); - /* enable the EP0 rx FIFO */ - outw (UDC_Set_FIFO_En, UDC_CTRL); -#else - /* Stall this request */ - UDCDBG ("Stalling unsupported EP0 control write data " - "stage."); - udc_stall_ep (0); -#endif - } else { - omap1510_prepare_for_control_write_status (ep0_urb); - } - } else { - UDCDBG ("control read on EP0"); - /* The ep0_recv_setup function has already placed our response - * packet data in ep0_urb->buffer and the packet length in - * ep0_urb->actual_length. - */ - endpoint->tx_urb = ep0_urb; - endpoint->sent = 0; - /* select the EP0 tx FIFO */ - outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo - * will update endpoint->last with the number of bytes written - * to the FIFO. - */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable the FIFO to start the packet transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the EP0 tx FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } - - UDCDBG ("<- Leaving device setup"); -} - -/* Handle endpoint 0 RX interrupt - * This routine implements TRM Figure 14-16. - */ -static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint) -{ - unsigned short status; - - UDCDBG ("RX on EP0"); - /* select EP0 rx FIFO */ - outw (UDC_EP_Sel, UDC_EP_NUM); - - status = inw (UDC_STAT_FLG); - - if (status & UDC_ACK) { - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType - & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { - /* This rx interrupt must be for a control write data - * stage packet. - * - * We don't support control write data stages. - * We should never end up here. - */ - - /* clear the EP0 rx FIFO */ - outw (UDC_Clr_EP, UDC_CTRL); - - /* deselect the EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - - UDCDBG ("Stalling unexpected EP0 control write " - "data stage packet"); - udc_stall_ep (0); - } else { - /* This rx interrupt must be for a control read status - * stage packet. - */ - UDCDBG ("ACK on EP0 control read status stage packet"); - /* deselect EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - } - } else if (status & UDC_STALL) { - UDCDBG ("EP0 stall during RX"); - /* deselect EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - } else { - /* deselect EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - } -} - -/* Handle endpoint 0 TX interrupt - * This routine implements TRM Figure 14-18. - */ -static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint) -{ - unsigned short status; - struct usb_device_request *request = &ep0_urb->device_request; - - UDCDBG ("TX on EP0"); - /* select EP0 TX FIFO */ - outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - - status = inw (UDC_STAT_FLG); - if (status & UDC_ACK) { - /* Check direction */ - if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == - USB_REQ_HOST2DEVICE) { - /* This tx interrupt must be for a control write status - * stage packet. - */ - UDCDBG ("ACK on EP0 control write status stage packet"); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } else { - /* This tx interrupt must be for a control read data - * stage packet. - */ - int wLength = le16_to_cpu (request->wLength); - - /* Update our count of bytes sent so far in this - * transfer. - */ - endpoint->sent += endpoint->last; - - /* We are finished with this transfer if we have sent - * all of the bytes in our tx urb (urb->actual_length) - * unless we need a zero-length terminating packet. We - * need a zero-length terminating packet if we returned - * fewer bytes than were requested (wLength) by the host, - * and the number of bytes we returned is an exact - * multiple of the packet size endpoint->tx_packetSize. - */ - if ((endpoint->sent == ep0_urb->actual_length) - && ((ep0_urb->actual_length == wLength) - || (endpoint->last != - endpoint->tx_packetSize))) { - /* Done with control read data stage. */ - UDCDBG ("control read data stage complete"); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - /* select EP0 RX FIFO to prepare for control - * read status stage. - */ - outw (UDC_EP_Sel, UDC_EP_NUM); - /* clear the EP0 RX FIFO */ - outw (UDC_Clr_EP, UDC_CTRL); - /* enable the EP0 RX FIFO */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the EP0 RX FIFO */ - outw (0, UDC_EP_NUM); - } else { - /* We still have another packet of data to send - * in this control read data stage or else we - * need a zero-length terminating packet. - */ - UDCDBG ("ACK control read data stage packet"); - omap1510_write_noniso_tx_fifo (endpoint); - /* enable the EP0 tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } - } - } else if (status & UDC_STALL) { - UDCDBG ("EP0 stall during TX"); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } else { - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } -} - -/* Handle RX transaction on non-ISO endpoint. - * This function implements TRM Figure 14-27. - * The ep argument is a physical endpoint number for a non-ISO OUT endpoint - * in the range 1 to 15. - */ -static void omap1510_udc_epn_rx (int ep) -{ - unsigned short status; - - /* Check endpoint status */ - status = inw (UDC_STAT_FLG); - - if (status & UDC_ACK) { - int nbytes; - struct usb_endpoint_instance *endpoint = - omap1510_find_ep (ep); - - nbytes = omap1510_read_noniso_rx_fifo (endpoint); - usbd_rcv_complete (endpoint, nbytes, 0); - - /* enable rx FIFO to prepare for next packet */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - } else if (status & UDC_STALL) { - UDCDBGA ("STALL on RX endpoint %d", ep); - } else if (status & UDC_NAK) { - UDCDBGA ("NAK on RX ep %d", ep); - } else { - serial_printf ("omap-bi: RX on ep %d with status %x", ep, - status); - } -} - -/* Handle TX transaction on non-ISO endpoint. - * This function implements TRM Figure 14-29. - * The ep argument is a physical endpoint number for a non-ISO IN endpoint - * in the range 16 to 30. - */ -static void omap1510_udc_epn_tx (int ep) -{ - unsigned short status; - - /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */ - - /* Check endpoint status */ - status = inw (UDC_STAT_FLG); - - if (status & UDC_ACK) { - struct usb_endpoint_instance *endpoint = - omap1510_find_ep (ep); - - /* We need to transmit a terminating zero-length packet now if - * we have sent all of the data in this URB and the transfer - * size was an exact multiple of the packet size. - */ - if (endpoint->tx_urb - && (endpoint->last == endpoint->tx_packetSize) - && (endpoint->tx_urb->actual_length - endpoint->sent - - endpoint->last == 0)) { - /* Prepare to transmit a zero-length packet. */ - endpoint->sent += endpoint->last; - /* write 0 bytes of data to FIFO */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - } else if (endpoint->tx_urb - && endpoint->tx_urb->actual_length) { - /* retire the data that was just sent */ - usbd_tx_complete (endpoint); - /* Check to see if we have more data ready to transmit - * now. - */ - if (endpoint->tx_urb - && endpoint->tx_urb->actual_length) { - /* write data to FIFO */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - } - } - } else if (status & UDC_STALL) { - UDCDBGA ("STALL on TX endpoint %d", ep); - } else if (status & UDC_NAK) { - UDCDBGA ("NAK on TX endpoint %d", ep); - } else { - /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */ - } -} - - -/* -------------------------------------------------------------------------------- -*/ - -/* Handle general USB interrupts and dispatch according to type. - * This function implements TRM Figure 14-13. - */ -void omap1510_udc_irq (void) -{ - u16 irq_src = inw (UDC_IRQ_SRC); - int valid_irq = 0; - - if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */ - return; - - UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src); - /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */ - - if (irq_src & UDC_DS_Chg) { - /* Device status changed */ - omap1510_udc_state_changed (); - valid_irq++; - } - if (irq_src & UDC_EP0_RX) { - /* Endpoint 0 receive */ - outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */ - omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0); - valid_irq++; - } - if (irq_src & UDC_EP0_TX) { - /* Endpoint 0 transmit */ - outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */ - omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0); - valid_irq++; - } - if (irq_src & UDC_Setup) { - /* Device setup */ - omap1510_udc_setup (udc_device->bus->endpoint_array + 0); - valid_irq++; - } - /*if (!valid_irq) */ - /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */ - UDCDBGA ("< IRQ #%d end >", udc_interrupts); - udc_interrupts++; -} - -/* This function implements TRM Figure 14-26. */ -void omap1510_udc_noniso_irq (void) -{ - unsigned short epnum; - unsigned short irq_src = inw (UDC_IRQ_SRC); - int valid_irq = 0; - - if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX))) - return; - - UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC)); - - if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */ - /* Determine the endpoint number for this interrupt */ - epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8; - UDCDBGA ("RX on ep %x", epnum); - - /* acknowledge interrupt */ - outw (UDC_EPn_RX, UDC_IRQ_SRC); - - if (epnum) { - /* select the endpoint FIFO */ - outw (UDC_EP_Sel | epnum, UDC_EP_NUM); - - omap1510_udc_epn_rx (epnum); - - /* deselect the endpoint FIFO */ - outw (epnum, UDC_EP_NUM); - } - valid_irq++; - } - if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */ - /* Determine the endpoint number for this interrupt */ - epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN; - UDCDBGA ("TX on ep %x", epnum); - - /* acknowledge interrupt */ - outw (UDC_EPn_TX, UDC_IRQ_SRC); - - if (epnum) { - /* select the endpoint FIFO */ - outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); - - omap1510_udc_epn_tx (epnum); - - /* deselect the endpoint FIFO */ - outw (UDC_EP_Dir | epnum, UDC_EP_NUM); - } - valid_irq++; - } - if (!valid_irq) - serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n", - irq_src); -} - -/* -------------------------------------------------------------------------------- -*/ - - -/* - * Start of public functions. - */ - -/* Called to start packet transmission. */ -int udc_endpoint_write (struct usb_endpoint_instance *endpoint) -{ - unsigned short epnum = - endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("Starting transmit on ep %x", epnum); - - if (endpoint->tx_urb) { - /* select the endpoint FIFO */ - outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); - /* write data to FIFO */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the endpoint FIFO */ - outw (UDC_EP_Dir | epnum, UDC_EP_NUM); - } - - return 0; -} - -/* Start to initialize h/w stuff */ -int udc_init (void) -{ - u16 udc_rev; - uchar value; - ulong gpio; - int i; - - /* Let the device settle down before we start */ - for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000); - - udc_device = NULL; - - UDCDBG ("starting"); - - /* Check peripheral reset. Must be 1 to make sure - MPU TIPB peripheral reset is inactive */ - UDCREG (ARM_RSTCT2); - - /* Set and check clock control. - * We might ought to be using the clock control API to do - * this instead of fiddling with the clock registers directly - * here. - */ - outw ((1 << 4) | (1 << 5), CLOCK_CTRL); - UDCREG (CLOCK_CTRL); - - /* Set and check SOFT - * The below line of code has been changed to perform a - * read-modify-write instead of a simple write for - * configuring the SOFT_REQ register. This allows the code - * to be compatible with OMAP5912 and OMAP16xx devices - */ - outw ((1 << 4) | (1 << 3) | 1 | (inw(SOFT_REQ)), SOFT_REQ); - - /* Short delay to wait for DPLL */ - udelay (1000); - - /* Print banner with device revision */ - udc_rev = inw (UDC_REV) & 0xff; - -#ifdef CONFIG_OMAP1610 - printf ("USB: TI OMAP5912 USB function module rev %d.%d\n", - udc_rev >> 4, udc_rev & 0xf); -#endif - - /* The VBUS_MODE bit selects whether VBUS detection is done via - * software (1) or hardware (0). When software detection is - * selected, VBUS_CTRL selects whether USB is not connected (0) - * or connected (1). - */ - outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); - outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); - UDCREGL (FUNC_MUX_CTRL_0); - - /* - * At this point, device is ready for configuration... - */ - - UDCDBG ("disable USB interrupts"); - outw (0, UDC_IRQ_EN); - UDCREG (UDC_IRQ_EN); - - UDCDBG ("disable USB DMA"); - outw (0, UDC_DMA_IRQ_EN); - UDCREG (UDC_DMA_IRQ_EN); - - UDCDBG ("initialize SYSCON1"); - outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1); - UDCREG (UDC_SYSCON1); - - return 0; -} - -/* Stall endpoint */ -static void udc_stall_ep (unsigned int ep_addr) -{ - /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("stall ep_addr %d", ep_addr); - - /* REVISIT? - * The OMAP TRM section 14.2.4.2 says we must check that the FIFO - * is empty before halting the endpoint. The current implementation - * doesn't check that the FIFO is empty. - */ - - if (!ep_num) { - outw (UDC_Stall_Cmd, UDC_SYSCON2); - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { - if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { - /* we have a valid rx endpoint, so halt it */ - outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); - outw (UDC_Set_Halt, UDC_CTRL); - outw (ep_num, UDC_EP_NUM); - } - } else { - if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { - /* we have a valid tx endpoint, so halt it */ - outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM); - outw (UDC_Set_Halt, UDC_CTRL); - outw (ep_num, UDC_EP_NUM); - } - } -} - -/* Reset endpoint */ -#if 0 -static void udc_reset_ep (unsigned int ep_addr) -{ - /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("reset ep_addr %d", ep_addr); - - if (!ep_num) { - /* control endpoint 0 can't be reset */ - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { - UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num, - inw (UDC_EP_RX (ep_num))); - if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { - /* we have a valid rx endpoint, so reset it */ - outw (ep_num | UDC_EP_Sel, UDC_EP_NUM); - outw (UDC_Reset_EP, UDC_CTRL); - outw (ep_num, UDC_EP_NUM); - UDCDBGA ("OUT endpoint %d reset", ep_num); - } - } else { - UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num, - inw (UDC_EP_TX (ep_num))); - /* Resetting of tx endpoints seems to be causing the USB function - * module to fail, which causes problems when the driver is - * uninstalled. We'll skip resetting tx endpoints for now until - * we figure out what the problem is. - */ -#if 0 - if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { - /* we have a valid tx endpoint, so reset it */ - outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - outw (UDC_Reset_EP, UDC_CTRL); - outw (ep_num | UDC_EP_Dir, UDC_EP_NUM); - UDCDBGA ("IN endpoint %d reset", ep_num); - } -#endif - } -} -#endif - -/* ************************************************************************** */ - -/** - * udc_check_ep - check logical endpoint - * - * Return physical endpoint number to use for this logical endpoint or zero if not valid. - */ -#if 0 -int udc_check_ep (int logical_endpoint, int packetsize) -{ - if ((logical_endpoint == 0x80) || - ((logical_endpoint & 0x8f) != logical_endpoint)) { - return 0; - } - - switch (packetsize) { - case 8: - case 16: - case 32: - case 64: - case 128: - case 256: - case 512: - break; - default: - return 0; - } - - return EP_ADDR_TO_PHYS_EP (logical_endpoint); -} -#endif - -/* - * udc_setup_ep - setup endpoint - * - * Associate a physical endpoint with endpoint_instance - */ -void udc_setup_ep (struct usb_device_instance *device, - unsigned int ep, struct usb_endpoint_instance *endpoint) -{ - UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address); - - /* This routine gets called by bi_modinit for endpoint 0 and from - * bi_config for all of the other endpoints. bi_config gets called - * during the DEVICE_CREATE, DEVICE_CONFIGURED, and - * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet - * RAM after bi_config scans the selected device configuration and - * initializes the endpoint structures, but before this routine enables - * the OUT endpoint FIFOs. Since bi_config calls this routine in a - * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our - * packet RAM here when ep==1. - * I really hate to do this here, but it seems like the API exported - * by the USB bus interface controller driver to the usbd-bi module - * isn't quite right so there is no good place to do this. - */ - if (ep == 1) { - omap1510_deconfigure_device (); - omap1510_configure_device (device); - } - - if (endpoint && (ep < UDC_MAX_ENDPOINTS)) { - int ep_addr = endpoint->endpoint_address; - - if (!ep_addr) { - /* nothing to do for endpoint 0 */ - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* nothing to do for IN (tx) endpoints */ - } else { /* OUT (rx) endpoint */ - if (endpoint->rcv_packetSize) { - /*struct urb* urb = &(urb_out_array[ep&0xFF]); */ - /*urb->endpoint = endpoint; */ - /*urb->device = device; */ - /*urb->buffer_length = sizeof(urb->buffer); */ - - /*endpoint->rcv_urb = urb; */ - omap1510_prepare_endpoint_for_rx (ep_addr); - } - } - } -} - -/** - * udc_disable_ep - disable endpoint - * @ep: - * - * Disable specified endpoint - */ -#if 0 -void udc_disable_ep (unsigned int ep_addr) -{ - /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */ - - UDCDBGA ("disable ep_addr %d", ep_addr); - - if (!ep_num) { - /* nothing to do for endpoint 0 */ ; - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - if (endpoint->tx_packetSize) { - /* we have a valid tx endpoint */ - /*usbd_flush_tx(endpoint); */ - endpoint->tx_urb = NULL; - } - } else { - if (endpoint->rcv_packetSize) { - /* we have a valid rx endpoint */ - /*usbd_flush_rcv(endpoint); */ - endpoint->rcv_urb = NULL; - } - } -} -#endif - -/* ************************************************************************** */ - -/** - * udc_connected - is the USB cable connected - * - * Return non-zero if cable is connected. - */ -#if 0 -int udc_connected (void) -{ - return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); -} -#endif - -/* Turn on the USB connection by enabling the pullup resistor */ -void udc_connect (void) -{ - UDCDBG ("connect, enable Pullup"); - outl (0x00000018, FUNC_MUX_CTRL_D); -} - -/* Turn off the USB connection by disabling the pullup resistor */ -void udc_disconnect (void) -{ - UDCDBG ("disconnect, disable Pullup"); - outl (0x00000000, FUNC_MUX_CTRL_D); -} - -/* ************************************************************************** */ - - -/* - * udc_disable_interrupts - disable interrupts - * switch off interrupts - */ -#if 0 -void udc_disable_interrupts (struct usb_device_instance *device) -{ - UDCDBG ("disabling all interrupts"); - outw (0, UDC_IRQ_EN); -} -#endif - -/* ************************************************************************** */ - -/** - * udc_ep0_packetsize - return ep0 packetsize - */ -#if 0 -int udc_ep0_packetsize (void) -{ - return EP0_PACKETSIZE; -} -#endif - -/* Switch on the UDC */ -void udc_enable (struct usb_device_instance *device) -{ - UDCDBGA ("enable device %p, status %d", device, device->status); - - /* initialize driver state variables */ - udc_devstat = 0; - - /* Save the device structure pointer */ - udc_device = device; - - /* Setup ep0 urb */ - if (!ep0_urb) { - ep0_urb = - usbd_alloc_urb (udc_device, - udc_device->bus->endpoint_array); - } else { - serial_printf ("udc_enable: ep0_urb already allocated %p\n", - ep0_urb); - } - - UDCDBG ("Check clock status"); - UDCREG (STATUS_REQ); - - /* The VBUS_MODE bit selects whether VBUS detection is done via - * software (1) or hardware (0). When software detection is - * selected, VBUS_CTRL selects whether USB is not connected (0) - * or connected (1). - */ - outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE, - FUNC_MUX_CTRL_0); - UDCREGL (FUNC_MUX_CTRL_0); - - omap1510_configure_device (device); -} - -/* Switch off the UDC */ -void udc_disable (void) -{ - UDCDBG ("disable UDC"); - - omap1510_deconfigure_device (); - - /* The VBUS_MODE bit selects whether VBUS detection is done via - * software (1) or hardware (0). When software detection is - * selected, VBUS_CTRL selects whether USB is not connected (0) - * or connected (1). - */ - outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); - outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); - UDCREGL (FUNC_MUX_CTRL_0); - - /* Free ep0 URB */ - if (ep0_urb) { - /*usbd_dealloc_urb(ep0_urb); */ - ep0_urb = NULL; - } - - /* Reset device pointer. - * We ought to do this here to balance the initialization of udc_device - * in udc_enable, but some of our other exported functions get called - * by the bus interface driver after udc_disable, so we have to hang on - * to the device pointer to avoid a null pointer dereference. */ - /* udc_device = NULL; */ -} - -/** - * udc_startup - allow udc code to do any additional startup - */ -void udc_startup_events (struct usb_device_instance *device) -{ - /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ - usbd_device_event_irq (device, DEVICE_INIT, 0); - - /* The DEVICE_CREATE event puts the USB device in the state - * STATE_ATTACHED. - */ - usbd_device_event_irq (device, DEVICE_CREATE, 0); - - /* Some USB controller driver implementations signal - * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. - * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, - * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. - * The OMAP USB client controller has the capability to detect when the - * USB cable is connected to a powered USB bus via the ATT bit in the - * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and - * DEVICE_RESET events until later. - */ - - udc_enable (device); -} - -/** - * udc_irq - do pseudo interrupts - */ -void udc_irq(void) -{ - /* Loop while we have interrupts. - * If we don't do this, the input chain - * polling delay is likely to miss - * host requests. - */ - while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { - /* Handle any new IRQs */ - omap1510_udc_irq (); - omap1510_udc_noniso_irq (); - } -} - -/* Flow control */ -void udc_set_nak(int epid) -{ - /* TODO: implement this functionality in omap1510 */ -} - -void udc_unset_nak (int epid) -{ - /* TODO: implement this functionality in omap1510 */ -} diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h deleted file mode 100644 index 5482722..0000000 --- a/include/configs/omap1510.h +++ /dev/null @@ -1,756 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * OMAP hardware map - * - * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com) - * Author: RidgeRun, Inc. - * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/sizes.h> - -/* - There are 2 sets of general I/O --> - 1. GPIO (shared between ARM & DSP, configured by ARM) - 2. MPUIO which can be used only by the ARM. - - Base address FFFB:5000 is where the ARM accesses the MPUIO control registers - (see 7.2.2 of the TRM for MPUIO reg definitions). - - Base address E101:5000 is reserved for ARM access of the same MPUIO control - regs, but via the DSP I/O map. This address is unavailable on 1510. - - Base address FFFC:E000 is where the ARM accesses the GPIO config registers - directly via its own peripheral bus. - - Base address E101:E000 is where the ARM can access the same GPIO config - registers, but the access takes place through the ARM port interface (called - API or MPUI) via the DSP's peripheral bus (DSP I/O space). - - Therefore, the ARM should setup the GPIO regs thru the FFFC:E000 addresses - instead of the E101:E000 addresses. The DSP has only read access of the pin - control register, so this may explain the inability to write to E101:E018. - Try accessing pin control reg at FFFC:E018. - */ -#define OMAP1510_GPIO_BASE 0xfffce000 -#define OMAP1510_GPIO_START OMAP1510_GPIO_BASE -#define OMAP1510_GPIO_SIZE SZ_4K - -#define OMAP1510_MCBSP1_BASE 0xE1011000 -#define OMAP1510_MCBSP1_SIZE SZ_4K -#define OMAP1510_MCBSP1_START 0xE1011000 - -#define OMAP1510_MCBSP2_BASE 0xFFFB1000 - -#define OMAP1510_MCBSP3_BASE 0xE1017000 -#define OMAP1510_MCBSP3_SIZE SZ_4K -#define OMAP1510_MCBSP3_START 0xE1017000 - -/* - * Where's the flush address (for flushing D and I cache?) - */ -#define FLUSH_BASE 0xdf000000 -#define FLUSH_BASE_PHYS 0x00000000 - -#ifndef __ASSEMBLER__ - -#define PCIO_BASE 0 - -/* - * RAM definitions - */ -#define MAPTOPHYS(a) ((unsigned long)(a) - PAGE_OFFSET) -#define KERNTOPHYS(a) ((unsigned long)(&a)) -#define KERNEL_BASE (0x10008000) -#endif - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x)) - -/* ---------------------------------------------------------------------------- - * OMAP1510 system registers - * ---------------------------------------------------------------------------- - */ - -#define OMAP1510_UART1_BASE 0xfffb0000 /* "BLUETOOTH-UART" */ -#define OMAP1510_UART2_BASE 0xfffb0800 /* "MODEM-UART" */ -#define OMAP1510_RTC_BASE 0xfffb4800 /* RTC */ -#define OMAP1510_UART3_BASE 0xfffb9800 /* Shared MPU/DSP UART */ -#define OMAP1510_COM_MCBSP2_BASE 0xffff1000 /* Com McBSP2 */ -#define OMAP1510_AUDIO_MCBSP_BASE 0xffff1800 /* Audio McBSP2 */ -#define OMAP1510_ARMIO_BASE 0xfffb5000 /* keyboard/gpio */ - -/* - * OMAP1510 UART3 Registers - */ - -#define OMAP_MPU_UART3_BASE 0xFFFB9800 /* UART3 through MPU bus */ - -/* UART3 Registers Maping through MPU bus */ - -#define UART3_RHR (OMAP_MPU_UART3_BASE + 0) -#define UART3_THR (OMAP_MPU_UART3_BASE + 0) -#define UART3_DLL (OMAP_MPU_UART3_BASE + 0) -#define UART3_IER (OMAP_MPU_UART3_BASE + 4) -#define UART3_DLH (OMAP_MPU_UART3_BASE + 4) -#define UART3_IIR (OMAP_MPU_UART3_BASE + 8) -#define UART3_FCR (OMAP_MPU_UART3_BASE + 8) -#define UART3_EFR (OMAP_MPU_UART3_BASE + 8) -#define UART3_LCR (OMAP_MPU_UART3_BASE + 0x0C) -#define UART3_MCR (OMAP_MPU_UART3_BASE + 0x10) -#define UART3_XON1_ADDR1 (OMAP_MPU_UART3_BASE + 0x10) -#define UART3_XON2_ADDR2 (OMAP_MPU_UART3_BASE + 0x14) -#define UART3_LSR (OMAP_MPU_UART3_BASE + 0x14) -#define UART3_TCR (OMAP_MPU_UART3_BASE + 0x18) -#define UART3_MSR (OMAP_MPU_UART3_BASE + 0x18) -#define UART3_XOFF1 (OMAP_MPU_UART3_BASE + 0x18) -#define UART3_XOFF2 (OMAP_MPU_UART3_BASE + 0x1C) -#define UART3_SPR (OMAP_MPU_UART3_BASE + 0x1C) -#define UART3_TLR (OMAP_MPU_UART3_BASE + 0x1C) -#define UART3_MDR1 (OMAP_MPU_UART3_BASE + 0x20) -#define UART3_MDR2 (OMAP_MPU_UART3_BASE + 0x24) -#define UART3_SFLSR (OMAP_MPU_UART3_BASE + 0x28) -#define UART3_TXFLL (OMAP_MPU_UART3_BASE + 0x28) -#define UART3_RESUME (OMAP_MPU_UART3_BASE + 0x2C) -#define UART3_TXFLH (OMAP_MPU_UART3_BASE + 0x2C) -#define UART3_SFREGL (OMAP_MPU_UART3_BASE + 0x30) -#define UART3_RXFLL (OMAP_MPU_UART3_BASE + 0x30) -#define UART3_SFREGH (OMAP_MPU_UART3_BASE + 0x34) -#define UART3_RXFLH (OMAP_MPU_UART3_BASE + 0x34) -#define UART3_BLR (OMAP_MPU_UART3_BASE + 0x38) -#define UART3_ACREG (OMAP_MPU_UART3_BASE + 0x3C) -#define UART3_DIV16 (OMAP_MPU_UART3_BASE + 0x3C) -#define UART3_SCR (OMAP_MPU_UART3_BASE + 0x40) -#define UART3_SSR (OMAP_MPU_UART3_BASE + 0x44) -#define UART3_EBLR (OMAP_MPU_UART3_BASE + 0x48) -#define UART3_OSC_12M_SEL (OMAP_MPU_UART3_BASE + 0x4C) -#define UART3_MVR (OMAP_MPU_UART3_BASE + 0x50) - -/* - * Configuration Registers - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define GATE_INH_CTRL_0 0xfffe1050 -#define VOLTAGE_CTRL_0 0xfffe1060 -#define TEST_DBG_CTRL_0 0xfffe1070 - -#define MOD_CONF_CTRL_0 0xfffe1080 - -#ifdef CONFIG_OMAP1610 /* 1610 Configuration Register */ - -#define USB_OTG_CTRL 0xFFFB040C -#define USB_TRANSCEIVER_CTRL 0xFFFE1064 -#define PULL_DWN_CTRL_4 0xFFFE10AC -#define PU_PD_SEL_0 0xFFFE10B4 -#define PU_PD_SEL_1 0xFFFE10B8 -#define PU_PD_SEL_2 0xFFFE10BC -#define PU_PD_SEL_3 0xFFFE10C0 -#define PU_PD_SEL_4 0xFFFE10C4 - -#endif -/* - * Traffic Controller Memory Interface Registers - */ -#define TCMIF_BASE 0xfffecc00 -#define IMIF_PRIO (TCMIF_BASE + 0x00) -#define EMIFS_PRIO_REG (TCMIF_BASE + 0x04) -#define EMIFF_PRIO_REG (TCMIF_BASE + 0x08) -#define EMIFS_CONFIG_REG (TCMIF_BASE + 0x0c) -#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) -#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) -#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) -#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) -#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) -#define EMIFF_MRS (TCMIF_BASE + 0x24) -#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) -#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) -#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) -#define TC_ENDIANISM (TCMIF_BASE + 0x34) -#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) -#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) - -/* - * LCD Panel - */ -#define TI925_LCD_BASE 0xFFFEC000 -#define TI925_LCD_CONTROL (TI925_LCD_BASE) -#define TI925_LCD_TIMING0 (TI925_LCD_BASE+0x4) -#define TI925_LCD_TIMING1 (TI925_LCD_BASE+0x8) -#define TI925_LCD_TIMING2 (TI925_LCD_BASE+0xc) -#define TI925_LCD_STATUS (TI925_LCD_BASE+0x10) -#define TI925_LCD_SUBPANEL (TI925_LCD_BASE+0x14) - -#define OMAP_LCD_CONTROL TI925_LCD_CONTROL - -/* I2C Registers */ - -#define I2C_BASE 0xfffb3800 - -#define I2C_REV (I2C_BASE + 0x00) -#define I2C_IE (I2C_BASE + 0x04) -#define I2C_STAT (I2C_BASE + 0x08) -#define I2C_IV (I2C_BASE + 0x0c) -#define I2C_BUF (I2C_BASE + 0x14) -#define I2C_CNT (I2C_BASE + 0x18) -#define I2C_DATA (I2C_BASE + 0x1c) -#define I2C_CON (I2C_BASE + 0x24) -#define I2C_OA (I2C_BASE + 0x28) -#define I2C_SA (I2C_BASE + 0x2c) -#define I2C_PSC (I2C_BASE + 0x30) -#define I2C_SCLL (I2C_BASE + 0x34) -#define I2C_SCLH (I2C_BASE + 0x38) -#define I2C_SYSTEST (I2C_BASE + 0x3c) - -/* I2C masks */ - -/* I2C Interrupt Enable Register (I2C_IE): */ - -#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ -#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ -#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ -#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ - -/* I2C Status Register (I2C_STAT): */ - -#define I2C_STAT_SBD (1 << 15) /* Single byte data */ -#define I2C_STAT_BB (1 << 12) /* Bus busy */ -#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ -#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ -#define I2C_STAT_AAS (1 << 9) /* Address as slave */ -#define I2C_STAT_AD0 (1 << 8) /* Address zero */ -#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ -#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ -#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ -#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ - -/* I2C Interrupt Vector Register (I2C_IV): */ - -/* I2C Interrupt Code Register (I2C_INTCODE): */ - -#define I2C_INTCODE_MASK 7 -#define I2C_INTCODE_NONE 0 -#define I2C_INTCODE_AL 1 /* Arbitration lost */ -#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ -#define I2C_INTCODE_ARDY 3 /* Register access ready */ -#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ -#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ - -/* I2C Buffer Configuration Register (I2C_BUF): */ - -#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ -#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ - -/* I2C Configuration Register (I2C_CON): */ - -#define I2C_CON_EN (1 << 15) /* I2C module enable */ -#define I2C_CON_BE (1 << 14) /* Big endian mode */ -#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ -#define I2C_CON_MST (1 << 10) /* Master/slave mode */ -#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ -#define I2C_CON_XA (1 << 8) /* Expand address */ -#define I2C_CON_RM (1 << 2) /* Repeat mode (master mode only) */ -#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ -#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ - -/* I2C System Test Register (I2C_SYSTEST): */ - -#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ -#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */ -#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ -#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ -#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ -#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ -#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ -#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ - -/* - * MMC/SD Host Controller Registers - */ - -#define OMAP_MMC_CMD 0xFFFB7800 /* MMC Command */ -#define OMAP_MMC_ARGL 0xFFFB7804 /* MMC argument low */ -#define OMAP_MMC_ARGH 0xFFFB7808 /* MMC argument high */ -#define OMAP_MMC_CON 0xFFFB780C /* MMC system configuration */ -#define OMAP_MMC_STAT 0xFFFB7810 /* MMC status */ -#define OMAP_MMC_IE 0xFFFB7814 /* MMC system interrupt enable */ -#define OMAP_MMC_CTO 0xFFFB7818 /* MMC command time-out */ -#define OMAP_MMC_DTO 0xFFFB781C /* MMC data time-out */ -#define OMAP_MMC_DATA 0xFFFB7820 /* MMC TX/RX FIFO data */ -#define OMAP_MMC_BLEN 0xFFFB7824 /* MMC block length */ -#define OMAP_MMC_NBLK 0xFFFB7828 /* MMC number of blocks */ -#define OMAP_MMC_BUF 0xFFFB782C /* MMC buffer configuration */ -#define OMAP_MMC_SPI 0xFFFB7830 /* MMC serial port interface */ -#define OMAP_MMC_SDIO 0xFFFB7834 /* MMC SDIO mode configuration */ -#define OMAP_MMC_SYST 0xFFFB7838 /* MMC system test */ -#define OMAP_MMC_REV 0xFFFB783C /* MMC module version */ -#define OMAP_MMC_RSP0 0xFFFB7840 /* MMC command response 0 */ -#define OMAP_MMC_RSP1 0xFFFB7844 /* MMC command response 1 */ -#define OMAP_MMC_RSP2 0xFFFB7848 /* MMC command response 2 */ -#define OMAP_MMC_RSP3 0xFFFB784C /* MMC command response 3 */ -#define OMAP_MMC_RSP4 0xFFFB7850 /* MMC command response 4 */ -#define OMAP_MMC_RSP5 0xFFFB7854 /* MMC command response 5 */ -#define OMAP_MMC_RSP6 0xFFFB7858 /* MMC command response 6 */ -#define OMAP_MMC_RSP7 0xFFFB785C /* MMC command response 4 */ - -/* MMC masks */ - -#define OMAP_MMC_END_OF_CMD (1 << 0) /* End of command phase */ -#define OMAP_MMC_CARD_BUSY (1 << 2) /* Card enter busy state */ -#define OMAP_MMC_BLOCK_RS (1 << 3) /* Block received/sent */ -#define OMAP_MMC_EOF_BUSY (1 << 4) /* Card exit busy state */ -#define OMAP_MMC_DATA_TIMEOUT (1 << 5) /* Data response time-out */ -#define OMAP_MMC_DATA_CRC (1 << 6) /* Date CRC error */ -#define OMAP_MMC_CMD_TIMEOUT (1 << 7) /* Command response time-out */ -#define OMAP_MMC_CMD_CRC (1 << 8) /* Command CRC error */ -#define OMAP_MMC_A_FULL (1 << 10) /* Buffer almost full */ -#define OMAP_MMC_A_EMPTY (1 << 11) /* Buffer almost empty */ -#define OMAP_MMC_OCR_BUSY (1 << 12) /* OCR busy */ -#define OMAP_MMC_CARD_IRQ (1 << 13) /* Card IRQ received */ -#define OMAP_MMC_CARD_ERR (1 << 14) /* Card status error in response */ - -/* 2.9.2 MPUI Interface Registers FFFE:C900 */ - -#define MPUI_CTRL_REG (volatile __u32 *)(0xfffec900) -#define MPUI_DEBUG_ADDR (volatile __u32 *)(0xfffec904) -#define MPUI_DEBUG_DATA (volatile __u32 *)(0xfffec908) -#define MPUI_DEBUG_FLAG (volatile __u16 *)(0xfffec90c) -#define MPUI_STATUS_REG (volatile __u16 *)(0xfffec910) -#define MPUI_DSP_STATUS_REG (volatile __u16 *)(0xfffec914) -#define MPUI_DSP_BOOT_CONFIG (volatile __u16 *)(0xfffec918) -#define MPUI_DSP_API_CONFIG (volatile __u16 *)(0xfffec91c) - -/* 2.9.6 Traffic Controller Memory Interface Registers: */ -#define OMAP_IMIF_PRIO_REG 0xfffecc00 -#define OMAP_EMIFS_PRIO_REG 0xfffecc04 -#define OMAP_EMIFF_PRIO_REG 0xfffecc08 -#define OMAP_EMIFS_CONFIG_REG 0xfffecc0c -#define OMAP_EMIFS_CS0_CONFIG 0xfffecc10 -#define OMAP_EMIFS_CS1_CONFIG 0xfffecc14 -#define OMAP_EMIFS_CS2_CONFIG 0xfffecc18 -#define OMAP_EMIFS_CS3_CONFIG 0xfffecc1c -#define OMAP_EMIFF_SDRAM_CONFIG 0xfffecc20 -#define OMAP_EMIFF_MRS 0xfffecc24 -#define OMAP_TIMEOUT1 0xfffecc28 -#define OMAP_TIMEOUT2 0xfffecc2c -#define OMAP_TIMEOUT3 0xfffecc30 -#define OMAP_ENDIANISM 0xfffecc34 - -/* 2.9.10 EMIF Slow Interface Configuration Register (EMIFS_CONFIG_REG): */ -#define OMAP_EMIFS_CONFIG_FR (1 << 4) -#define OMAP_EMIFS_CONFIG_PDE (1 << 3) -#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) -#define OMAP_EMIFS_CONFIG_BM (1 << 1) -#define OMAP_EMIFS_CONFIG_WP (1 << 0) - -/* - * Memory chunk set aside for the Framebuffer in SRAM - */ -#define SRAM_FRAMEBUFFER_MEMORY OMAP1510_SRAM_BASE - - -/* - * DMA - */ - -#define OMAP1510_DMA_BASE 0xFFFED800 -#define OMAP_DMA_BASE OMAP1510_DMA_BASE - -/* Global Register selection */ -#define NO_GLOBAL_DMA_ACCESS 0 - -/* Channel select field - * NOTE: all other channels are linear, chan0 is 0, chan1 is 1, etc... - */ -#define LCD_CHANNEL 0xc - -/* Register Select Field (LCD) */ -#define DMA_LCD_CTRL 0 -#define DMA_LCD_TOP_F1_L 1 -#define DMA_LCD_TOP_F1_U 2 -#define DMA_LCD_BOT_F1_L 3 -#define DMA_LCD_BOT_F1_U 4 - -#define LCD_FRAME_MODE (1<<0) -#define LCD_FRAME_IT_IE (1<<1) -#define LCD_BUS_ERROR_IT_IE (1<<2) -#define LCD_FRAME_1_IT_COND (1<<3) -#define LCD_FRAME_2_IT_COND (1<<4) -#define LCD_BUS_ERROR_IT_COND (1<<5) -#define LCD_SOURCE_IMIF (1<<6) - -/* - * Real-Time Clock - */ - -#define RTC_SECONDS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x00) -#define RTC_MINUTES (volatile __u8 *)(OMAP1510_RTC_BASE + 0x04) -#define RTC_HOURS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x08) -#define RTC_DAYS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x0C) -#define RTC_MONTHS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x10) -#define RTC_YEARS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x14) -#define RTC_CTRL (volatile __u8 *)(OMAP1510_RTC_BASE + 0x40) - - -/* --------------------------------------------------------------------------- - * OMAP1510 Interrupt Handlers - * --------------------------------------------------------------------------- - * - */ -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 -#define OMAP1510_ITR 0x0 -#define OMAP1510_MASK 0x4 - -#define INTERRUPT_HANDLER_BASE OMAP_IH1_BASE -#define INTERRUPT_INPUT_REGISTER OMAP1510_ITR -#define INTERRUPT_MASK_REGISTER OMAP1510_MASK - - -/* --------------------------------------------------------------------------- - * OMAP1510 TIMERS - * --------------------------------------------------------------------------- - * - */ - -#define OMAP1510_32kHz_TIMER_BASE 0xfffb9000 - -/* 32k Timer Registers */ -#define TIMER32k_CR 0x08 -#define TIMER32k_TVR 0x00 -#define TIMER32k_TCR 0x04 - -/* 32k Timer Control Register definition */ -#define TIMER32k_TSS (1<<0) -#define TIMER32k_TRB (1<<1) -#define TIMER32k_INT (1<<2) -#define TIMER32k_ARL (1<<3) - -/* MPU Timer base addresses */ -#define OMAP1510_MPUTIMER_BASE 0xfffec500 -#define OMAP1510_MPUTIMER_OFF 0x00000100 - -#define OMAP1510_TIMER1_BASE 0xfffec500 -#define OMAP1510_TIMER2_BASE 0xfffec600 -#define OMAP1510_TIMER3_BASE 0xfffec700 - -/* MPU Timer Registers */ -#define CNTL_TIMER 0 -#define LOAD_TIM 4 -#define READ_TIM 8 - -/* CNTL_TIMER register bits */ -#define MPUTIM_FREE (1<<6) -#define MPUTIM_CLOCK_ENABLE (1<<5) -#define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT) -#define MPUTIM_PTV_BIT 2 -#define MPUTIM_AR (1<<1) -#define MPUTIM_ST (1<<0) - -/* --------------------------------------------------------------------------- - * OMAP1510 GPIO (SHARED) - * --------------------------------------------------------------------------- - * - */ -#define GPIO_DATA_INPUT_REG (OMAP1510_GPIO_BASE + 0x0) -#define GPIO_DATA_OUTPUT_REG (OMAP1510_GPIO_BASE + 0x4) -#define GPIO_DIR_CONTROL_REG (OMAP1510_GPIO_BASE + 0x8) -#define GPIO_INT_CONTROL_REG (OMAP1510_GPIO_BASE + 0xc) -#define GPIO_INT_MASK_REG (OMAP1510_GPIO_BASE + 0x10) -#define GPIO_INT_STATUS_REG (OMAP1510_GPIO_BASE + 0x14) -#define GPIO_PIN_CONTROL_REG (OMAP1510_GPIO_BASE + 0x18) - - -/* --------------------------- - * OMAP1510 MPUIO (ARM only) - *---------------------------- - */ -#define OMAP1510_MPUIO_BASE 0xFFFB5000 -#define MPUIO_DATA_INPUT_REG (OMAP1510_MPUIO_BASE + 0x0) -#define MPUIO_DATA_OUTPUT_REG (OMAP1510_MPUIO_BASE + 0x4) -#define MPUIO_DIR_CONTROL_REG (OMAP1510_MPUIO_BASE + 0x8) - -/* --------------------------------------------------------------------------- - * OMAP1510 TIPB (only) - * --------------------------------------------------------------------------- - * - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL_REG (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL_REG (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * OMAP1510 Camera Interface - * --------------------------------------------------------------------------- - */ -#define CAMERA_BASE (IO_BASE + 0x6800) -#define CAM_CTRLCLOCK_REG (CAMERA_BASE + 0x00) -#define CAM_IT_STATUS_REG (CAMERA_BASE + 0x04) -#define CAM_MODE_REG (CAMERA_BASE + 0x08) -#define CAM_STATUS_REG (CAMERA_BASE + 0x0C) -#define CAM_CAMDATA_REG (CAMERA_BASE + 0x10) -#define CAM_GPIO_REG (CAMERA_BASE + 0x14) -#define CAM_PEAK_CTR_REG (CAMERA_BASE + 0x18) - -#if 0 -#ifndef __ASSEMBLY__ -typedef struct { - __u32 ctrlclock; - __u32 it_status; - __u32 mode; - __u32 status; - __u32 camdata; - __u32 gpio; - __u32 peak_counter; -} camera_regs_t; -#endif -#endif - -/* CTRLCLOCK bit shifts */ -#define FOSCMOD_BIT 0 -#define FOSCMOD_MASK (0x7 << FOSCMOD_BIT) -#define FOSCMOD_12MHz 0x0 -#define FOSCMOD_6MHz 0x2 -#define FOSCMOD_9_6MHz 0x4 -#define FOSCMOD_24MHz 0x5 -#define FOSCMOD_8MHz 0x6 -#define POLCLK (1<<3) -#define CAMEXCLK_EN (1<<4) -#define MCLK_EN (1<<5) -#define DPLL_EN (1<<6) -#define LCLK_EN (1<<7) - -/* IT_STATUS bit shifts */ -#define V_UP (1<<0) -#define V_DOWN (1<<1) -#define H_UP (1<<2) -#define H_DOWN (1<<3) -#define FIFO_FULL (1<<4) -#define DATA_XFER (1<<5) - -/* MODE bit shifts */ -#define CAMOSC (1<<0) -#define IMGSIZE_BIT 1 -#define IMGSIZE_MASK (0x3 << IMGSIZE_BIT) -#define IMGSIZE_CIF (0x0 << IMGSIZE_BIT) /* 352x288 */ -#define IMGSIZE_QCIF (0x1 << IMGSIZE_BIT) /* 176x144 */ -#define IMGSIZE_VGA (0x2 << IMGSIZE_BIT) /* 640x480 */ -#define IMGSIZE_QVGA (0x3 << IMGSIZE_BIT) /* 320x240 */ -#define ORDERCAMD (1<<3) -#define EN_V_UP (1<<4) -#define EN_V_DOWN (1<<5) -#define EN_H_UP (1<<6) -#define EN_H_DOWN (1<<7) -#define EN_DMA (1<<8) -#define THRESHOLD (1<<9) -#define THRESHOLD_BIT 9 -#define THRESHOLD_MASK (0x7f<<9) -#define EN_NIRQ (1<<16) -#define EN_FIFO_FULL (1<<17) -#define RAZ_FIFO (1<<18) - -/* STATUS bit shifts */ -#define VSTATUS (1<<0) -#define HSTATUS (1<<1) - -/* GPIO bit shifts */ -#define CAM_RST (1<<0) - - -/********************* - * Watchdog timer. - *********************/ -#define WDTIM_BASE 0xfffec800 -#define WDTIM_CONTROL (WDTIM_BASE+0x00) -#define WDTIM_LOAD (WDTIM_BASE+0x04) -#define WDTIM_READ (WDTIM_BASE+0x04) -#define WDTIM_MODE (WDTIM_BASE+0x08) - -/* Values to write to mode register to disable the watchdog function. */ -#define DISABLE_SEQ1 0xF5 -#define DISABLE_SEQ2 0xA0 - -/* WDTIM_CONTROL bit definitions. */ -#define WDTIM_CONTROL_ST BIT7 - - -/* --------------------------------------------------------------------------- - * Differentiating processor versions for those who care. - * --------------------------------------------------------------------------- - * - */ -#define OMAP1509 0 -#define OMAP1510 1 - -#define OMAP1510_ID_CODE_REG 0xfffed404 - -#ifndef __ASSEMBLY__ -int cpu_type(void); -#endif - -/*****************************************************************************/ - -#define CLKGEN_RESET_BASE (0xfffece00) -#define ARM_CKCTL (volatile __u16 *)(CLKGEN_RESET_BASE + 0x0) -#define ARM_IDLECT1 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x4) -#define ARM_IDLECT2 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x8) -#define ARM_EWUPCT (volatile __u16 *)(CLKGEN_RESET_BASE + 0xC) -#define ARM_RSTCT1 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x10) -#define ARM_RSTCT2 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x14) -#define ARM_SYSST (volatile __u16 *)(CLKGEN_RESET_BASE + 0x18) - - -#define CK_CLKIN 12 /* MHz */ -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#ifndef __ASSEMBLER__ -#define CK_DPLL1 ((volatile __u16 *)0xfffecf00) -#else -#define CK_DPLL1 (0xfffecf00) -#endif -#define SETARM_IDLE_SHIFT - -/* ARM_CKCTL bit shifts */ -#define PERDIV 0 -#define LCDDIV 2 -#define ARMDIV 4 -#define DSPDIV 6 -#define TCDIV 8 -#define DSPMMUDIV 10 -#define ARM_TIMXO 12 -#define EN_DSPCK 13 -#define ARM_INTHCK_SEL 14 /* REVISIT -- where is this used? */ - -#define ARM_CKCTL_RSRVD_BIT15 (1 << 15) -#define ARM_CKCTL_ARM_INTHCK_SEL (1 << 14) -#define ARM_CKCTL_EN_DSPCK (1 << 13) -#define ARM_CKCTL_ARM_TIMXO (1 << 12) -#define ARM_CKCTL_DSPMMU_DIV1 (1 << 11) -#define ARM_CKCTL_DSPMMU_DIV2 (1 << 10) -#define ARM_CKCTL_TCDIV1 (1 << 9) -#define ARM_CKCTL_TCDIV2 (1 << 8) -#define ARM_CKCTL_DSPDIV1 (1 << 7) -#define ARM_CKCTL_DSPDIV0 (1 << 6) -#define ARM_CKCTL_ARMDIV1 (1 << 5) -#define ARM_CKCTL_ARMDIV0 (1 << 4) -#define ARM_CKCTL_LCDDIV1 (1 << 3) -#define ARM_CKCTL_LCDDIV0 (1 << 2) -#define ARM_CKCTL_PERDIV1 (1 << 1) -#define ARM_CKCTL_PERDIV0 (1 << 0) - -/* ARM_IDLECT1 bit shifts */ -#define IDLWDT_ARM 0 -#define IDLXORP_ARM 1 -#define IDLPER_ARM 2 -#define IDLLCD_ARM 3 -#define IDLLB_ARM 4 -#define IDLHSAB_ARM 5 -#define IDLIF_ARM 6 -#define IDLDPLL_ARM 7 -#define IDLAPI_ARM 8 -#define IDLTIM_ARM 9 -#define SETARM_IDLE 11 - -/* ARM_IDLECT2 bit shifts */ -#define EN_WDTCK 0 -#define EN_XORPCK 1 -#define EN_PERCK 2 -#define EN_LCDCK 3 -#define EN_LBCK 4 -#define EN_HSABCK 5 -#define EN_APICK 6 -#define EN_TIMCK 7 -#define DMACK_REQ 8 -#define EN_GPIOCK 9 -#define EN_LBFREECK 10 - -#define ARM_RSTCT1_SW_RST (1 << 3) -#define ARM_RSTCT1_DSP_RST (1 << 2) -#define ARM_RSTCT1_DSP_EN (1 << 1) -#define ARM_RSTCT1_ARM_RST (1 << 0) - -/* ARM_RSTCT2 bit shifts */ -#define EN_PER 0 - -#define ARM_SYSST_RSRVD_BIT15 (1 << 15) -#define ARM_SYSST_RSRVD_BIT14 (1 << 14) -#define ARM_SYSST_CLOCK_SELECT2 (1 << 13) -#define ARM_SYSST_CLOCK_SELECT1 (1 << 12) -#define ARM_SYSST_CLOCK_SELECT0 (1 << 11) -#define ARM_SYSST_RSRVD_BIT10 (1 << 10) -#define ARM_SYSST_RSRVD_BIT9 (1 << 9) -#define ARM_SYSST_RSRVD_BIT8 (1 << 8) -#define ARM_SYSST_RSRVD_BIT7 (1 << 7) -#define ARM_SYSST_IDLE_DSP (1 << 6) -#define ARM_SYSST_POR (1 << 5) -#define ARM_SYSST_EXT_RST (1 << 4) -#define ARM_SYSST_ARM_MCRST (1 << 3) -#define ARM_SYSST_ARM_WDRST (1 << 2) -#define ARM_SYSST_GLOB_SWRST (1 << 1) -#define ARM_SYSST_DSP_WDRST (1 << 0) - -/* Table 15-23. DPLL Control Registers: */ -#define DPLL_CTL_REG (volatile __u16 *)(0xfffecf00) - -/* Table 15-24. Control Register (CTL_REG): */ - -#define DPLL_CTL_REG_IOB (1 << 13) -#define DPLL_CTL_REG_PLL_MULT Fld(5,0) - -/*****************************************************************************/ - -/* OMAP INTERRUPT REGISTERS */ -#define IRQ_ITR 0x00 -#define IRQ_MIR 0x04 -#define IRQ_SIR_IRQ 0x10 -#define IRQ_SIR_FIQ 0x14 -#define IRQ_CONTROL_REG 0x18 -#define IRQ_ISR 0x9c -#define IRQ_ILR0 0x1c - -#define REG_IHL1_MIR (OMAP_IH1_BASE+IRQ_MIR) -#define REG_IHL2_MIR (OMAP_IH2_BASE+IRQ_MIR) - -/* INTERRUPT LEVEL REGISTER BITS */ -#define ILR_PRIORITY_MASK (0x3c) -#define ILR_PRIORITY_SHIFT (2) -#define ILR_LEVEL_TRIGGER (1<<1) -#define ILR_FIQ (1<<0) - -#define IRQ_LEVEL_INT 1 -#define IRQ_EDGE_INT 0 - -/* Macros to access registers */ -#define outb(v,p) *(volatile u8 *) (p) = v -#define outw(v,p) *(volatile u16 *) (p) = v -#define outl(v,p) *(volatile u32 *) (p) = v - -#define inb(p) *(volatile u8 *) (p) -#define inw(p) *(volatile u16 *) (p) -#define inl(p) *(volatile u32 *) (p) diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h deleted file mode 100644 index 376dfdb..0000000 --- a/include/configs/omap5912osk.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments. - * Kshitij Gupta kshitij@ti.com - * Configuation settings for the TI OMAP Innovator board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1610 1 /* 5912 is same as 1610 */ -#define CONFIG_OSK_OMAP5912 1 /* a OSK Board */ - -#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ -#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ - -/* input clock of PLL */ -/* the OMAP5912 OSK has 12MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 12000000 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -/* -*/ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE 0x04800300 -#define CONFIG_LAN91C96_EXT_PHY - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ -#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart - on helen */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP5912 OSK */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - - -#include <configs/omap1510.h> - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \ - root=/dev/nfs rw nfsroot=157.87.82.48:\ - /home/mwd/myfs/target ip=dhcp" -#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */ -#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */ -#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ -#define CONFIG_BOOTFILE "uImage" /* file to load */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "OMAP5912 OSK # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ - -/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by - * DPLL1. This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */ -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ - -#define PHYS_SRAM 0x20000000 - -/*----------------------------------------------------------------------- - * FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ - -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* addr of environment */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) - -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_OFFSET 0x40000 /* environment starts here */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR PHYS_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE (250 * 1024) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE) - -#endif /* __CONFIG_H */

Becuase the board select menu in arch/arm/Kconfig is too big, move the Zynq board select menu to zynq/Kconfig.

Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="zynq").

Refactor board/xilinx/zynq/MAINTAINERS too.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Michal Simek michal.simek@xilinx.com ---

Changes in v2: None

arch/arm/Kconfig | 15 ++---- arch/arm/cpu/armv7/zynq/Kconfig | 43 +++++++++++++++++ board/xilinx/zynq/Kconfig | 95 -------------------------------------- board/xilinx/zynq/MAINTAINERS | 12 +---- configs/zynq_microzed_defconfig | 1 + configs/zynq_zc70x_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm012_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + configs/zynq_zed_defconfig | 1 + include/configs/zynq-common.h | 1 - 11 files changed, 54 insertions(+), 118 deletions(-) create mode 100644 arch/arm/cpu/armv7/zynq/Kconfig delete mode 100644 board/xilinx/zynq/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e97f94d..f4faffc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -656,17 +656,8 @@ config TARGET_U8500_HREF config TARGET_VF610TWR bool "Support vf610twr"

-config TARGET_ZYNQ_MICROZED - bool "Support zynq_microzed" - -config TARGET_ZYNQ_ZC70X - bool "Support zynq_zc70x" - -config TARGET_ZYNQ_ZC770 - bool "Support zynq_zc770" - -config TARGET_ZYNQ_ZED - bool "Support zynq_zed" +config ZYNQ + bool "Xilinx Zynq Platform"

config TARGET_MEDCOM_WIDE bool "Support medcom-wide" @@ -769,6 +760,7 @@ config TARGET_JORNADA

endchoice

+source "arch/arm/cpu/armv7/zynq/Kconfig" source "board/8dtech/eco5pk/Kconfig" source "board/Barix/ipam390/Kconfig" source "board/BuR/kwb/Kconfig" @@ -992,7 +984,6 @@ source "board/vpac270/Kconfig" source "board/wandboard/Kconfig" source "board/woodburn/Kconfig" source "board/xaeniax/Kconfig" -source "board/xilinx/zynq/Kconfig" source "board/zipitz2/Kconfig"

endmenu diff --git a/arch/arm/cpu/armv7/zynq/Kconfig b/arch/arm/cpu/armv7/zynq/Kconfig new file mode 100644 index 0000000..6b88f18 --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/Kconfig @@ -0,0 +1,43 @@ +if ZYNQ + +choice + prompt "Xilinx Zynq board select" + +config TARGET_ZYNQ_ZED + bool "Zynq ZedBoard" + +config TARGET_ZYNQ_MICROZED + bool "Zynq MicroZed" + +config TARGET_ZYNQ_ZC70X + bool "Zynq ZC702/ZC706 Board" + +config TARGET_ZYNQ_ZC770 + bool "Zynq ZC770 Board" + +endchoice + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "zynq" + +config SYS_VENDOR + string + default "xilinx" + +config SYS_SOC + string + default "zynq" + +config SYS_CONFIG_NAME + string + default "zynq_zed" if TARGET_ZYNQ_ZED + default "zynq_microzed" if TARGET_ZYNQ_MICROZED + default "zynq_zc70x" if TARGET_ZYNQ_ZC70X + default "zynq_zc770" if TARGET_ZYNQ_ZC770 + +endif diff --git a/board/xilinx/zynq/Kconfig b/board/xilinx/zynq/Kconfig deleted file mode 100644 index 3b72a5f..0000000 --- a/board/xilinx/zynq/Kconfig +++ /dev/null @@ -1,95 +0,0 @@ -if TARGET_ZYNQ_MICROZED - -config SYS_CPU - string - default "armv7" - -config SYS_BOARD - string - default "zynq" - -config SYS_VENDOR - string - default "xilinx" - -config SYS_SOC - string - default "zynq" - -config SYS_CONFIG_NAME - string - default "zynq_microzed" - -endif - -if TARGET_ZYNQ_ZC70X - -config SYS_CPU - string - default "armv7" - -config SYS_BOARD - string - default "zynq" - -config SYS_VENDOR - string - default "xilinx" - -config SYS_SOC - string - default "zynq" - -config SYS_CONFIG_NAME - string - default "zynq_zc70x" - -endif - -if TARGET_ZYNQ_ZC770 - -config SYS_CPU - string - default "armv7" - -config SYS_BOARD - string - default "zynq" - -config SYS_VENDOR - string - default "xilinx" - -config SYS_SOC - string - default "zynq" - -config SYS_CONFIG_NAME - string - default "zynq_zc770" - -endif - -if TARGET_ZYNQ_ZED - -config SYS_CPU - string - default "armv7" - -config SYS_BOARD - string - default "zynq" - -config SYS_VENDOR - string - default "xilinx" - -config SYS_SOC - string - default "zynq" - -config SYS_CONFIG_NAME - string - default "zynq_zed" - -endif diff --git a/board/xilinx/zynq/MAINTAINERS b/board/xilinx/zynq/MAINTAINERS index e167816..382e921 100644 --- a/board/xilinx/zynq/MAINTAINERS +++ b/board/xilinx/zynq/MAINTAINERS @@ -3,13 +3,5 @@ M: Michal Simek monstr@monstr.eu M: Jagannadha Sutradharudu Teki jaganna@xilinx.com S: Maintained F: board/xilinx/zynq/ -F: include/configs/zynq_microzed.h -F: configs/zynq_microzed_defconfig -F: include/configs/zynq_zc70x.h -F: configs/zynq_zc70x_defconfig -F: include/configs/zynq_zc770.h -F: configs/zynq_zc770_xm010_defconfig -F: configs/zynq_zc770_xm012_defconfig -F: configs/zynq_zc770_xm013_defconfig -F: include/configs/zynq_zed.h -F: configs/zynq_zed_defconfig +F: include/configs/zynq*.h +F: configs/zynq_*_defconfig diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 14024d0..3aedb35 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_MICROZED=y diff --git a/configs/zynq_zc70x_defconfig b/configs/zynq_zc70x_defconfig index d2e79a5..04c8def 100644 --- a/configs/zynq_zc70x_defconfig +++ b/configs/zynq_zc70x_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC70X=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index e9f9c4b..1178b40 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010" +S:CONFIG_ARM=y ++S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 78f1fe6..52c2121 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" +S:CONFIG_ARM=y ++S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index d96e8ff..836809a 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" +S:CONFIG_ARM=y ++S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index abf7e82..2337906 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZED=y diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index d57e9d5..875cb43 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -12,7 +12,6 @@

/* High Level configuration Options */ #define CONFIG_ARMV7 -#define CONFIG_ZYNQ

/* CPU clock */ #ifndef CONFIG_CPU_FREQ_HZ

Becuase the board select menu in arch/arm/Kconfig is too big, move the Tegra board select menu to tegra/Kconfig.

Insert the Tegra SoC select menu between the arch select and the board select.

Architecture select |-- Tegra Platform (Tegra) |- Tegra SoC select (Tegra20 / 30 / 114 / 124) |- Board select

Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="tegra*") and always "select" CONFIG_SPL as follows:

config TEGRA bool select SPL

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Tom Warren twarren@nvidia.com Acked-by: Stephen Warren swarren@nvidia.com ---

Changes in v2: - Fix board names (The names were taken from DTS)

arch/arm/Kconfig | 69 +++--------------------------- arch/arm/cpu/armv7/tegra-common/Kconfig | 30 +++++++++++++ arch/arm/cpu/armv7/tegra114/Kconfig | 17 ++++++++ arch/arm/cpu/armv7/tegra124/Kconfig | 21 +++++++++ arch/arm/cpu/armv7/tegra20/Kconfig | 53 +++++++++++++++++++++++ arch/arm/cpu/armv7/tegra30/Kconfig | 25 +++++++++++ arch/arm/include/asm/arch-tegra114/tegra.h | 2 - arch/arm/include/asm/arch-tegra124/tegra.h | 2 - arch/arm/include/asm/arch-tegra20/tegra.h | 2 - arch/arm/include/asm/arch-tegra30/tegra.h | 2 - board/avionic-design/medcom-wide/Kconfig | 9 ---- board/avionic-design/plutux/Kconfig | 9 ---- board/avionic-design/tec-ng/Kconfig | 9 ---- board/avionic-design/tec/Kconfig | 9 ---- board/compal/paz00/Kconfig | 9 ---- board/compulab/trimslice/Kconfig | 9 ---- board/nvidia/beaver/Kconfig | 9 ---- board/nvidia/cardhu/Kconfig | 9 ---- board/nvidia/dalmore/Kconfig | 9 ---- board/nvidia/harmony/Kconfig | 9 ---- board/nvidia/jetson-tk1/Kconfig | 9 ---- board/nvidia/seaboard/Kconfig | 9 ---- board/nvidia/venice2/Kconfig | 9 ---- board/nvidia/ventana/Kconfig | 9 ---- board/nvidia/whistler/Kconfig | 9 ---- board/toradex/colibri_t20_iris/Kconfig | 9 ---- configs/beaver_defconfig | 3 +- configs/cardhu_defconfig | 3 +- configs/colibri_t20_iris_defconfig | 3 +- configs/dalmore_defconfig | 3 +- configs/harmony_defconfig | 3 +- configs/jetson-tk1_defconfig | 3 +- configs/medcom-wide_defconfig | 3 +- configs/paz00_defconfig | 3 +- configs/plutux_defconfig | 3 +- configs/seaboard_defconfig | 3 +- configs/tec-ng_defconfig | 3 +- configs/tec_defconfig | 3 +- configs/trimslice_defconfig | 3 +- configs/venice2_defconfig | 3 +- configs/ventana_defconfig | 3 +- configs/whistler_defconfig | 3 +- include/configs/tegra-common.h | 1 - 43 files changed, 184 insertions(+), 232 deletions(-) create mode 100644 arch/arm/cpu/armv7/tegra-common/Kconfig create mode 100644 arch/arm/cpu/armv7/tegra114/Kconfig create mode 100644 arch/arm/cpu/armv7/tegra124/Kconfig create mode 100644 arch/arm/cpu/armv7/tegra20/Kconfig create mode 100644 arch/arm/cpu/armv7/tegra30/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f4faffc..812e8af 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -659,53 +659,9 @@ config TARGET_VF610TWR config ZYNQ bool "Xilinx Zynq Platform"

-config TARGET_MEDCOM_WIDE - bool "Support medcom-wide" - -config TARGET_PLUTUX - bool "Support plutux" - -config TARGET_TEC - bool "Support tec" - -config TARGET_PAZ00 - bool "Support paz00" - -config TARGET_TRIMSLICE - bool "Support trimslice" - -config TARGET_HARMONY - bool "Support harmony" - -config TARGET_SEABOARD - bool "Support seaboard" - -config TARGET_VENTANA - bool "Support ventana" - -config TARGET_WHISTLER - bool "Support whistler" - -config TARGET_COLIBRI_T20_IRIS - bool "Support colibri_t20_iris" - -config TARGET_TEC_NG - bool "Support tec-ng" - -config TARGET_BEAVER - bool "Support beaver" - -config TARGET_CARDHU - bool "Support cardhu" - -config TARGET_DALMORE - bool "Support dalmore" - -config TARGET_JETSON_TK1 - bool "Support jetson-tk1" - -config TARGET_VENICE2 - bool "Support venice2" +config TEGRA + bool "NVIDIA Tegra" + select SPL

config TARGET_VEXPRESS_AEMV8A bool "Support vexpress_aemv8a" @@ -760,7 +716,10 @@ config TARGET_JORNADA

endchoice

+source "arch/arm/cpu/armv7/tegra-common/Kconfig" + source "arch/arm/cpu/armv7/zynq/Kconfig" + source "board/8dtech/eco5pk/Kconfig" source "board/Barix/ipam390/Kconfig" source "board/BuR/kwb/Kconfig" @@ -802,10 +761,6 @@ source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" -source "board/avionic-design/medcom-wide/Kconfig" -source "board/avionic-design/plutux/Kconfig" -source "board/avionic-design/tec-ng/Kconfig" -source "board/avionic-design/tec/Kconfig" source "board/balloon3/Kconfig" source "board/barco/titanium/Kconfig" source "board/bluegiga/apx4devkit/Kconfig" @@ -821,11 +776,9 @@ source "board/cloudengines/pogo_e02/Kconfig" source "board/cm4008/Kconfig" source "board/cm41xx/Kconfig" source "board/comelit/dig297/Kconfig" -source "board/compal/paz00/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t35/Kconfig" source "board/compulab/cm_t54/Kconfig" -source "board/compulab/trimslice/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" source "board/corscience/tricorder/Kconfig" source "board/creative/xfi3/Kconfig" @@ -896,15 +849,6 @@ source "board/logicpd/zoom1/Kconfig" source "board/matrix_vision/mvblx/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/nokia/rx51/Kconfig" -source "board/nvidia/beaver/Kconfig" -source "board/nvidia/cardhu/Kconfig" -source "board/nvidia/dalmore/Kconfig" -source "board/nvidia/harmony/Kconfig" -source "board/nvidia/jetson-tk1/Kconfig" -source "board/nvidia/seaboard/Kconfig" -source "board/nvidia/venice2/Kconfig" -source "board/nvidia/ventana/Kconfig" -source "board/nvidia/whistler/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/omicron/calimain/Kconfig" source "board/overo/Kconfig" @@ -976,7 +920,6 @@ source "board/ti/tnetv107xevm/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" -source "board/toradex/colibri_t20_iris/Kconfig" source "board/trizepsiv/Kconfig" source "board/ttcontrol/vision2/Kconfig" source "board/udoo/Kconfig" diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig new file mode 100644 index 0000000..8e2153b --- /dev/null +++ b/arch/arm/cpu/armv7/tegra-common/Kconfig @@ -0,0 +1,30 @@ +if TEGRA + +choice + prompt "Tegra SoC select" + +config TEGRA20 + bool "Tegra20 family" + +config TEGRA30 + bool "Tegra30 family" + +config TEGRA114 + bool "Tegra114 family" + +config TEGRA124 + bool "Tegra124 family" + +endchoice + +config SYS_CPU + string + default "arm720t" if SPL_BUILD + default "armv7" if !SPL_BUILD + +source "arch/arm/cpu/armv7/tegra20/Kconfig" +source "arch/arm/cpu/armv7/tegra30/Kconfig" +source "arch/arm/cpu/armv7/tegra114/Kconfig" +source "arch/arm/cpu/armv7/tegra124/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/tegra114/Kconfig b/arch/arm/cpu/armv7/tegra114/Kconfig new file mode 100644 index 0000000..33a22da --- /dev/null +++ b/arch/arm/cpu/armv7/tegra114/Kconfig @@ -0,0 +1,17 @@ +if TEGRA114 + +choice + prompt "Tegra114 board select" + +config TARGET_DALMORE + bool "NVIDIA Tegra114 Dalmore evaluation board" + +endchoice + +config SYS_SOC + string + default "tegra114" + +source "board/nvidia/dalmore/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/tegra124/Kconfig b/arch/arm/cpu/armv7/tegra124/Kconfig new file mode 100644 index 0000000..753f511 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra124/Kconfig @@ -0,0 +1,21 @@ +if TEGRA124 + +choice + prompt "Tegra124 board select" + +config TARGET_JETSON_TK1 + bool "NVIDIA Tegra124 Jetson TK1 board" + +config TARGET_VENICE2 + bool "NVIDIA Tegra124 Venice2" + +endchoice + +config SYS_SOC + string + default "tegra124" + +source "board/nvidia/jetson-tk1/Kconfig" +source "board/nvidia/venice2/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/tegra20/Kconfig b/arch/arm/cpu/armv7/tegra20/Kconfig new file mode 100644 index 0000000..e2e0890 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/Kconfig @@ -0,0 +1,53 @@ +if TEGRA20 + +choice + prompt "Tegra20 board select" + +config TARGET_HARMONY + bool "NVIDIA Tegra20 Harmony evaluation board" + +config TARGET_MEDCOM_WIDE + bool "Avionic Design Medcom-Wide board" + +config TARGET_PAZ00 + bool "Paz00 board" + +config TARGET_PLUTUX + bool "Avionic Design Plutux board" + +config TARGET_SEABOARD + bool "NVIDIA Seaboard" + +config TARGET_TEC + bool "Avionic Design Tamonten Evaluation Carrier" + +config TARGET_TRIMSLICE + bool "Compulab TrimSlice board" + +config TARGET_VENTANA + bool "NVIDIA Tegra20 Ventana evaluation board" + +config TARGET_WHISTLER + bool "NVIDIA Tegra20 Whistler evaluation board" + +config TARGET_COLIBRI_T20_IRIS + bool "Toradex Colibri T20 board" + +endchoice + +config SYS_SOC + string + default "tegra20" + +source "board/nvidia/harmony/Kconfig" +source "board/avionic-design/medcom-wide/Kconfig" +source "board/compal/paz00/Kconfig" +source "board/avionic-design/plutux/Kconfig" +source "board/nvidia/seaboard/Kconfig" +source "board/avionic-design/tec/Kconfig" +source "board/compulab/trimslice/Kconfig" +source "board/nvidia/ventana/Kconfig" +source "board/nvidia/whistler/Kconfig" +source "board/toradex/colibri_t20_iris/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/tegra30/Kconfig b/arch/arm/cpu/armv7/tegra30/Kconfig new file mode 100644 index 0000000..15fa335 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra30/Kconfig @@ -0,0 +1,25 @@ +if TEGRA30 + +choice + prompt "Tegra30 board select" + +config TARGET_BEAVER + bool "NVIDIA Tegra30 Beaver evaluation board" + +config TARGET_CARDHU + bool "NVIDIA Tegra30 Cardhu evaluation board" + +config TARGET_TEC_NG + bool "Avionic Design TEC-NG board" + +endchoice + +config SYS_SOC + string + default "tegra30" + +source "board/nvidia/beaver/Kconfig" +source "board/nvidia/cardhu/Kconfig" +source "board/avionic-design/tec-ng/Kconfig" + +endif diff --git a/arch/arm/include/asm/arch-tegra114/tegra.h b/arch/arm/include/asm/arch-tegra114/tegra.h index 705ca57..5d426b5 100644 --- a/arch/arm/include/asm/arch-tegra114/tegra.h +++ b/arch/arm/include/asm/arch-tegra114/tegra.h @@ -17,8 +17,6 @@ #ifndef _TEGRA114_H_ #define _TEGRA114_H_

-#define CONFIG_TEGRA114 - #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T114 */ #define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */

diff --git a/arch/arm/include/asm/arch-tegra124/tegra.h b/arch/arm/include/asm/arch-tegra124/tegra.h index 86ebd19..db3d837 100644 --- a/arch/arm/include/asm/arch-tegra124/tegra.h +++ b/arch/arm/include/asm/arch-tegra124/tegra.h @@ -8,8 +8,6 @@ #ifndef _TEGRA124_H_ #define _TEGRA124_H_

-#define CONFIG_TEGRA124 - #define NV_PA_SDRAM_BASE 0x80000000 #define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ #define NV_PA_MC_BASE 0x70019000 /* Mem Ctlr regs (MCB, etc.) */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h index 6a4b40e..18856ac 100644 --- a/arch/arm/include/asm/arch-tegra20/tegra.h +++ b/arch/arm/include/asm/arch-tegra20/tegra.h @@ -8,8 +8,6 @@ #ifndef _TEGRA20_H_ #define _TEGRA20_H_

-#define CONFIG_TEGRA20 - #define NV_PA_SDRAM_BASE 0x00000000

#include <asm/arch-tegra/tegra.h> diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h index 4ad8b1c..c02c5d8 100644 --- a/arch/arm/include/asm/arch-tegra30/tegra.h +++ b/arch/arm/include/asm/arch-tegra30/tegra.h @@ -17,8 +17,6 @@ #ifndef _TEGRA30_H_ #define _TEGRA30_H_

-#define CONFIG_TEGRA30 - #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T30 */

#include <asm/arch-tegra/tegra.h> diff --git a/board/avionic-design/medcom-wide/Kconfig b/board/avionic-design/medcom-wide/Kconfig index 2472fe2..16001e4 100644 --- a/board/avionic-design/medcom-wide/Kconfig +++ b/board/avionic-design/medcom-wide/Kconfig @@ -1,10 +1,5 @@ if TARGET_MEDCOM_WIDE

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "medcom-wide" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "avionic-design"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "medcom-wide" diff --git a/board/avionic-design/plutux/Kconfig b/board/avionic-design/plutux/Kconfig index a697a54..c9a90247 100644 --- a/board/avionic-design/plutux/Kconfig +++ b/board/avionic-design/plutux/Kconfig @@ -1,10 +1,5 @@ if TARGET_PLUTUX

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "plutux" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "avionic-design"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "plutux" diff --git a/board/avionic-design/tec-ng/Kconfig b/board/avionic-design/tec-ng/Kconfig index f52edda..e6b69e8 100644 --- a/board/avionic-design/tec-ng/Kconfig +++ b/board/avionic-design/tec-ng/Kconfig @@ -1,10 +1,5 @@ if TARGET_TEC_NG

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "tec-ng" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "avionic-design"

-config SYS_SOC - string - default "tegra30" - config SYS_CONFIG_NAME string default "tec-ng" diff --git a/board/avionic-design/tec/Kconfig b/board/avionic-design/tec/Kconfig index d19e3f4..fbf7f46 100644 --- a/board/avionic-design/tec/Kconfig +++ b/board/avionic-design/tec/Kconfig @@ -1,10 +1,5 @@ if TARGET_TEC

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "tec" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "avionic-design"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "tec" diff --git a/board/compal/paz00/Kconfig b/board/compal/paz00/Kconfig index 4f0f09f..690d7a7 100644 --- a/board/compal/paz00/Kconfig +++ b/board/compal/paz00/Kconfig @@ -1,10 +1,5 @@ if TARGET_PAZ00

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "paz00" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "compal"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "paz00" diff --git a/board/compulab/trimslice/Kconfig b/board/compulab/trimslice/Kconfig index e545f0c..6ae030c 100644 --- a/board/compulab/trimslice/Kconfig +++ b/board/compulab/trimslice/Kconfig @@ -1,10 +1,5 @@ if TARGET_TRIMSLICE

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "trimslice" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "compulab"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "trimslice" diff --git a/board/nvidia/beaver/Kconfig b/board/nvidia/beaver/Kconfig index f052676..e487b66 100644 --- a/board/nvidia/beaver/Kconfig +++ b/board/nvidia/beaver/Kconfig @@ -1,10 +1,5 @@ if TARGET_BEAVER

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "beaver" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra30" - config SYS_CONFIG_NAME string default "beaver" diff --git a/board/nvidia/cardhu/Kconfig b/board/nvidia/cardhu/Kconfig index 9853114..150815f 100644 --- a/board/nvidia/cardhu/Kconfig +++ b/board/nvidia/cardhu/Kconfig @@ -1,10 +1,5 @@ if TARGET_CARDHU

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "cardhu" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra30" - config SYS_CONFIG_NAME string default "cardhu" diff --git a/board/nvidia/dalmore/Kconfig b/board/nvidia/dalmore/Kconfig index 33b78db..9eed19c 100644 --- a/board/nvidia/dalmore/Kconfig +++ b/board/nvidia/dalmore/Kconfig @@ -1,10 +1,5 @@ if TARGET_DALMORE

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "dalmore" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra114" - config SYS_CONFIG_NAME string default "dalmore" diff --git a/board/nvidia/harmony/Kconfig b/board/nvidia/harmony/Kconfig index 2a3bde4..7d75f2d 100644 --- a/board/nvidia/harmony/Kconfig +++ b/board/nvidia/harmony/Kconfig @@ -1,10 +1,5 @@ if TARGET_HARMONY

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "harmony" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "harmony" diff --git a/board/nvidia/jetson-tk1/Kconfig b/board/nvidia/jetson-tk1/Kconfig index 22b4c69..02b46b7 100644 --- a/board/nvidia/jetson-tk1/Kconfig +++ b/board/nvidia/jetson-tk1/Kconfig @@ -1,10 +1,5 @@ if TARGET_JETSON_TK1

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "jetson-tk1" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra124" - config SYS_CONFIG_NAME string default "jetson-tk1" diff --git a/board/nvidia/seaboard/Kconfig b/board/nvidia/seaboard/Kconfig index 39c65b5..7863702 100644 --- a/board/nvidia/seaboard/Kconfig +++ b/board/nvidia/seaboard/Kconfig @@ -1,10 +1,5 @@ if TARGET_SEABOARD

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "seaboard" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "seaboard" diff --git a/board/nvidia/venice2/Kconfig b/board/nvidia/venice2/Kconfig index 84a7160..993da79 100644 --- a/board/nvidia/venice2/Kconfig +++ b/board/nvidia/venice2/Kconfig @@ -1,10 +1,5 @@ if TARGET_VENICE2

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "venice2" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra124" - config SYS_CONFIG_NAME string default "venice2" diff --git a/board/nvidia/ventana/Kconfig b/board/nvidia/ventana/Kconfig index 59e85c4..95840a8 100644 --- a/board/nvidia/ventana/Kconfig +++ b/board/nvidia/ventana/Kconfig @@ -1,10 +1,5 @@ if TARGET_VENTANA

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "ventana" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "ventana" diff --git a/board/nvidia/whistler/Kconfig b/board/nvidia/whistler/Kconfig index f025413..113e2ef 100644 --- a/board/nvidia/whistler/Kconfig +++ b/board/nvidia/whistler/Kconfig @@ -1,10 +1,5 @@ if TARGET_WHISTLER

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "whistler" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "nvidia"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "whistler" diff --git a/board/toradex/colibri_t20_iris/Kconfig b/board/toradex/colibri_t20_iris/Kconfig index 334b7e0..cccdd58 100644 --- a/board/toradex/colibri_t20_iris/Kconfig +++ b/board/toradex/colibri_t20_iris/Kconfig @@ -1,10 +1,5 @@ if TARGET_COLIBRI_T20_IRIS

-config SYS_CPU - string - default "arm720t" if SPL_BUILD - default "armv7" if !SPL_BUILD - config SYS_BOARD string default "colibri_t20_iris" @@ -13,10 +8,6 @@ config SYS_VENDOR string default "toradex"

-config SYS_SOC - string - default "tegra20" - config SYS_CONFIG_NAME string default "colibri_t20_iris" diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 0e70f25..7c9d94b 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_BEAVER=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 564ad5a..bb042b4 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_CARDHU=y diff --git a/configs/colibri_t20_iris_defconfig b/configs/colibri_t20_iris_defconfig index 8ff2464..b2a21e1 100644 --- a/configs/colibri_t20_iris_defconfig +++ b/configs/colibri_t20_iris_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_COLIBRI_T20_IRIS=y diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 288b238..70677aa 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA114=y +S:CONFIG_TARGET_DALMORE=y diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index d25ea5c..a52231b 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_HARMONY=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 6926257..00eac92 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA124=y +S:CONFIG_TARGET_JETSON_TK1=y diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index ddf3437..e9a3930 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_MEDCOM_WIDE=y diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index 61a536e..05974eb 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_PAZ00=y diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 672b66c..60e80ff 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_PLUTUX=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index c0f078b..516e760 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_SEABOARD=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index 2360d25..e4a31cc 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_TEC_NG=y diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 1aaa9d1..62a9542 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_TEC=y diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index c096c65..94f23e3 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_TRIMSLICE=y diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index 2bfa91d..dfc5407 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA124=y +S:CONFIG_TARGET_VENICE2=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 75fca96..845e241 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_VENTANA=y diff --git a/configs/whistler_defconfig b/configs/whistler_defconfig index cdc2c90..8c07c18 100644 --- a/configs/whistler_defconfig +++ b/configs/whistler_defconfig @@ -1,3 +1,4 @@ -CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_TEGRA=y ++S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_WHISTLER=y diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 717cd61..d27fceb 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -14,7 +14,6 @@ * High Level Configuration Options */ #define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */ -#define CONFIG_TEGRA /* which is a Tegra generic machine */ #define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */

#include <asm/arch/tegra.h> /* get chip and board defs */

Move Versatile-specific settings to versatile/Kconfig.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

Changes in v2: None

arch/arm/Kconfig | 13 ++---- arch/arm/cpu/arm926ejs/versatile/Kconfig | 23 +++++++++++ board/armltd/versatile/Kconfig | 71 -------------------------------- configs/versatileab_defconfig | 2 +- configs/versatilepb_defconfig | 2 +- configs/versatileqemu_defconfig | 2 +- 6 files changed, 30 insertions(+), 83 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/versatile/Kconfig delete mode 100644 board/armltd/versatile/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a288ee1..955fce8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -308,14 +308,8 @@ config TARGET_SPEAR600 config TARGET_X600 bool "Support x600"

-config TARGET_VERSATILEAB - bool "Support versatileab" - -config TARGET_VERSATILEPB - bool "Support versatilepb" - -config TARGET_VERSATILEQEMU - bool "Support versatileqemu" +config ARCH_VERSATILE + bool "ARM Ltd. Versatile family"

config TARGET_INTEGRATORCP_CM1136 bool "Support integratorcp_cm1136" @@ -708,6 +702,8 @@ source "arch/arm/cpu/armv7/rmobile/Kconfig"

source "arch/arm/cpu/armv7/tegra-common/Kconfig"

+source "arch/arm/cpu/arm926ejs/versatile/Kconfig" + source "arch/arm/cpu/armv7/zynq/Kconfig"

source "board/8dtech/eco5pk/Kconfig" @@ -737,7 +733,6 @@ source "board/ait/cam_enc_4xx/Kconfig" source "board/altera/socfpga/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/integrator/Kconfig" -source "board/armltd/versatile/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/atmel/at91rm9200ek/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/versatile/Kconfig b/arch/arm/cpu/arm926ejs/versatile/Kconfig new file mode 100644 index 0000000..fc29c98 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/versatile/Kconfig @@ -0,0 +1,23 @@ +if ARCH_VERSATILE + +config SYS_CPU + string + default "arm926ejs" + +config SYS_BOARD + string + default "versatile" + +config SYS_VENDOR + string + default "armltd" + +config SYS_SOC + string + default "versatile" + +config SYS_CONFIG_NAME + string + default "versatile" + +endif diff --git a/board/armltd/versatile/Kconfig b/board/armltd/versatile/Kconfig deleted file mode 100644 index f96d0b2..0000000 --- a/board/armltd/versatile/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -if TARGET_VERSATILEAB - -config SYS_CPU - string - default "arm926ejs" - -config SYS_BOARD - string - default "versatile" - -config SYS_VENDOR - string - default "armltd" - -config SYS_SOC - string - default "versatile" - -config SYS_CONFIG_NAME - string - default "versatile" - -endif - -if TARGET_VERSATILEPB - -config SYS_CPU - string - default "arm926ejs" - -config SYS_BOARD - string - default "versatile" - -config SYS_VENDOR - string - default "armltd" - -config SYS_SOC - string - default "versatile" - -config SYS_CONFIG_NAME - string - default "versatile" - -endif - -if TARGET_VERSATILEQEMU - -config SYS_CPU - string - default "arm926ejs" - -config SYS_BOARD - string - default "versatile" - -config SYS_VENDOR - string - default "armltd" - -config SYS_SOC - string - default "versatile" - -config SYS_CONFIG_NAME - string - default "versatile" - -endif diff --git a/configs/versatileab_defconfig b/configs/versatileab_defconfig index 9d64dd0..94680fe 100644 --- a/configs/versatileab_defconfig +++ b/configs/versatileab_defconfig @@ -1,3 +1,3 @@ CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_AB" CONFIG_ARM=y -CONFIG_TARGET_VERSATILEAB=y +CONFIG_ARCH_VERSATILE=y diff --git a/configs/versatilepb_defconfig b/configs/versatilepb_defconfig index fadaf93..2c59e5c 100644 --- a/configs/versatilepb_defconfig +++ b/configs/versatilepb_defconfig @@ -1,3 +1,3 @@ CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_PB" CONFIG_ARM=y -CONFIG_TARGET_VERSATILEPB=y +CONFIG_ARCH_VERSATILE=y diff --git a/configs/versatileqemu_defconfig b/configs/versatileqemu_defconfig index 9d24558..fb0485d 100644 --- a/configs/versatileqemu_defconfig +++ b/configs/versatileqemu_defconfig @@ -1,3 +1,3 @@ CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB" CONFIG_ARM=y -CONFIG_TARGET_VERSATILEQEMU=y +CONFIG_ARCH_VERSATILE=y

Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP3 board select menu to omap3/Kconfig.

Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap3

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Reviewed-by: Tom Rini trini@ti.com ---

Changes in v2: None

arch/arm/Kconfig | 93 ++-------------------------- arch/arm/cpu/armv7/omap3/Kconfig | 107 +++++++++++++++++++++++++++++++++ board/8dtech/eco5pk/Kconfig | 8 --- board/comelit/dig297/Kconfig | 8 --- board/compulab/cm_t35/Kconfig | 8 --- board/corscience/tricorder/Kconfig | 8 --- board/htkw/mcx/Kconfig | 8 --- board/isee/igep00x0/Kconfig | 8 --- board/logicpd/am3517evm/Kconfig | 8 --- board/logicpd/omap3som/Kconfig | 8 --- board/logicpd/zoom1/Kconfig | 8 --- board/matrix_vision/mvblx/Kconfig | 8 --- board/nokia/rx51/Kconfig | 8 --- board/overo/Kconfig | 8 --- board/pandora/Kconfig | 8 --- board/technexion/tao3530/Kconfig | 8 --- board/technexion/twister/Kconfig | 8 --- board/teejet/mt_ventoux/Kconfig | 8 --- board/ti/am3517crane/Kconfig | 8 --- board/ti/beagle/Kconfig | 8 --- board/ti/evm/Kconfig | 24 -------- board/ti/sdp3430/Kconfig | 8 --- board/timll/devkit8000/Kconfig | 8 --- configs/am3517_crane_defconfig | 1 + configs/am3517_evm_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/devkit8000_defconfig | 1 + configs/dig297_defconfig | 1 + configs/eco5pk_defconfig | 1 + configs/igep0020_defconfig | 1 + configs/igep0020_nand_defconfig | 1 + configs/igep0030_defconfig | 1 + configs/igep0030_nand_defconfig | 1 + configs/igep0032_defconfig | 1 + configs/mcx_defconfig | 1 + configs/mt_ventoux_defconfig | 1 + configs/nokia_rx51_defconfig | 1 + configs/omap3_beagle_defconfig | 1 + configs/omap3_evm_defconfig | 1 + configs/omap3_evm_quick_mmc_defconfig | 1 + configs/omap3_evm_quick_nand_defconfig | 1 + configs/omap3_ha_defconfig | 1 + configs/omap3_logic_defconfig | 1 + configs/omap3_mvblx_defconfig | 1 + configs/omap3_overo_defconfig | 1 + configs/omap3_pandora_defconfig | 1 + configs/omap3_sdp3430_defconfig | 1 + configs/omap3_zoom1_defconfig | 1 + configs/tao3530_defconfig | 1 + configs/tricorder_defconfig | 1 + configs/tricorder_flash_defconfig | 1 + configs/twister_defconfig | 1 + include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/cm_t35.h | 1 - include/configs/devkit8000.h | 1 - include/configs/dig297.h | 1 - include/configs/mcx.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_mvblx.h | 1 - include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/ti_omap3_common.h | 1 - include/configs/tricorder.h | 1 - 68 files changed, 140 insertions(+), 289 deletions(-) create mode 100644 arch/arm/cpu/armv7/omap3/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8b3b7f7..ee29e30 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -400,74 +400,8 @@ config TARGET_GW_VENTANA config TARGET_HUMMINGBOARD bool "Support hummingboard"

-config TARGET_OMAP3_OVERO - bool "Support omap3_overo" - -config TARGET_OMAP3_PANDORA - bool "Support omap3_pandora" - -config TARGET_ECO5PK - bool "Support eco5pk" - -config TARGET_DIG297 - bool "Support dig297" - -config TARGET_CM_T35 - bool "Support cm_t35" - -config TARGET_TRICORDER - bool "Support tricorder" - -config TARGET_MCX - bool "Support mcx" - -config TARGET_OMAP3_IGEP00X0 - bool "Support omap3_igep00x0" - -config TARGET_AM3517_EVM - bool "Support am3517_evm" - -config TARGET_OMAP3_LOGIC - bool "Support omap3_logic" - -config TARGET_OMAP3_ZOOM1 - bool "Support omap3_zoom1" - -config TARGET_OMAP3_MVBLX - bool "Support omap3_mvblx" - -config TARGET_NOKIA_RX51 - bool "Support nokia_rx51" - -config TARGET_TAO3530 - bool "Support tao3530" - -config TARGET_TWISTER - bool "Support twister" - -config TARGET_MT_VENTOUX - bool "Support mt_ventoux" - -config TARGET_AM3517_CRANE - bool "Support am3517_crane" - -config TARGET_OMAP3_BEAGLE - bool "Support omap3_beagle" - -config TARGET_OMAP3_EVM - bool "Support omap3_evm" - -config TARGET_OMAP3_EVM_QUICK_MMC - bool "Support omap3_evm_quick_mmc" - -config TARGET_OMAP3_EVM_QUICK_NAND - bool "Support omap3_evm_quick_nand" - -config TARGET_OMAP3_SDP3430 - bool "Support omap3_sdp3430" - -config TARGET_DEVKIT8000 - bool "Support devkit8000" +config OMAP34XX + bool "OMAP34XX SoC"

config TARGET_DUOVERO bool "Support duovero" @@ -583,6 +517,8 @@ source "arch/arm/cpu/armv7/exynos/Kconfig"

source "arch/arm/cpu/arm926ejs/kirkwood/Kconfig"

+source "arch/arm/cpu/armv7/omap3/Kconfig" + source "arch/arm/cpu/armv7/rmobile/Kconfig"

source "arch/arm/cpu/armv7/tegra-common/Kconfig" @@ -591,7 +527,6 @@ source "arch/arm/cpu/arm926ejs/versatile/Kconfig"

source "arch/arm/cpu/armv7/zynq/Kconfig"

-source "board/8dtech/eco5pk/Kconfig" source "board/BuR/kwb/Kconfig" source "board/BuR/tseries/Kconfig" source "board/BuS/eb_cpux9k2/Kconfig" @@ -629,12 +564,9 @@ source "board/calao/usb_a9263/Kconfig" source "board/cirrus/edb93xx/Kconfig" source "board/cm4008/Kconfig" source "board/cm41xx/Kconfig" -source "board/comelit/dig297/Kconfig" source "board/compulab/cm_t335/Kconfig" -source "board/compulab/cm_t35/Kconfig" source "board/compulab/cm_t54/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" -source "board/corscience/tricorder/Kconfig" source "board/creative/xfi3/Kconfig" source "board/davedenx/qong/Kconfig" source "board/denx/m28evk/Kconfig" @@ -672,27 +604,18 @@ source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hale/tt01/Kconfig" source "board/highbank/Kconfig" -source "board/htkw/mcx/Kconfig" source "board/icpdas/lp8x4x/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" -source "board/isee/igep00x0/Kconfig" source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" -source "board/logicpd/am3517evm/Kconfig" source "board/logicpd/imx27lite/Kconfig" source "board/logicpd/imx31_litekit/Kconfig" -source "board/logicpd/omap3som/Kconfig" -source "board/logicpd/zoom1/Kconfig" -source "board/matrix_vision/mvblx/Kconfig" source "board/mpl/vcma9/Kconfig" -source "board/nokia/rx51/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" -source "board/overo/Kconfig" source "board/palmld/Kconfig" source "board/palmtc/Kconfig" source "board/palmtreo680/Kconfig" -source "board/pandora/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/pxa255_idp/Kconfig" @@ -725,25 +648,17 @@ source "board/sunxi/Kconfig" source "board/syteco/jadecpu/Kconfig" source "board/syteco/zmx25/Kconfig" source "board/taskit/stamp9g20/Kconfig" -source "board/technexion/tao3530/Kconfig" -source "board/technexion/twister/Kconfig" -source "board/teejet/mt_ventoux/Kconfig" source "board/ti/am335x/Kconfig" -source "board/ti/am3517crane/Kconfig" source "board/ti/am43xx/Kconfig" -source "board/ti/beagle/Kconfig" source "board/ti/dra7xx/Kconfig" -source "board/ti/evm/Kconfig" source "board/ti/ks2_evm/Kconfig" source "board/ti/omap5_uevm/Kconfig" source "board/ti/panda/Kconfig" -source "board/ti/sdp3430/Kconfig" source "board/ti/sdp4430/Kconfig" source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" source "board/ti/tnetv107xevm/Kconfig" source "board/timll/devkit3250/Kconfig" -source "board/timll/devkit8000/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/trizepsiv/Kconfig" source "board/ttcontrol/vision2/Kconfig" diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig new file mode 100644 index 0000000..6578f0c --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -0,0 +1,107 @@ +if OMAP34XX + +choice + prompt "OMAP3 board select" + +config TARGET_AM3517_EVM + bool "AM3517 EVM" + +config TARGET_MT_VENTOUX + bool "TeeJet Mt.Ventoux" + +config TARGET_OMAP3_SDP3430 + bool "TI OMAP3430 SDP" + +config TARGET_OMAP3_BEAGLE + bool "TI OMAP3 BeagleBoard" + +config TARGET_CM_T35 + bool "CompuLab CM-T35" + +config TARGET_DEVKIT8000 + bool "TimLL OMAP3 Devkit8000" + +config TARGET_OMAP3_EVM + bool "TI OMAP3 EVM" + +config TARGET_OMAP3_EVM_QUICK_MMC + bool "TI OMAP3 EVM Quick MMC" + +config TARGET_OMAP3_EVM_QUICK_NAND + bool "TI OMAP3 EVM Quick NAND" + +config TARGET_OMAP3_IGEP00X0 + bool "IGEP" + +config TARGET_OMAP3_OVERO + bool "OMAP35xx Gumstix Overo" + +config TARGET_OMAP3_ZOOM1 + bool "TI Zoom1" + +config TARGET_AM3517_CRANE + bool "am3517_crane" + +config TARGET_OMAP3_PANDORA + bool "OMAP3 Pandora" + +config TARGET_ECO5PK + bool "ECO5PK" + +config TARGET_DIG297 + bool "DIG297" + +config TARGET_TRICORDER + bool "Tricorder" + +config TARGET_MCX + bool "MCX" + +config TARGET_OMAP3_LOGIC + bool "OMAP3 Logic" + +config TARGET_OMAP3_MVBLX + bool "OMAP3 MVBLX" + +config TARGET_NOKIA_RX51 + bool "Nokia RX51" + +config TARGET_TAO3530 + bool "TAO3530" + +config TARGET_TWISTER + bool "Twister" + +endchoice + +config SYS_CPU + string + default "armv7" + +config SYS_SOC + string + default "omap3" + +source "board/logicpd/am3517evm/Kconfig" +source "board/teejet/mt_ventoux/Kconfig" +source "board/ti/sdp3430/Kconfig" +source "board/ti/beagle/Kconfig" +source "board/compulab/cm_t35/Kconfig" +source "board/timll/devkit8000/Kconfig" +source "board/ti/evm/Kconfig" +source "board/isee/igep00x0/Kconfig" +source "board/overo/Kconfig" +source "board/logicpd/zoom1/Kconfig" +source "board/ti/am3517crane/Kconfig" +source "board/pandora/Kconfig" +source "board/8dtech/eco5pk/Kconfig" +source "board/comelit/dig297/Kconfig" +source "board/corscience/tricorder/Kconfig" +source "board/htkw/mcx/Kconfig" +source "board/logicpd/omap3som/Kconfig" +source "board/matrix_vision/mvblx/Kconfig" +source "board/nokia/rx51/Kconfig" +source "board/technexion/tao3530/Kconfig" +source "board/technexion/twister/Kconfig" + +endif diff --git a/board/8dtech/eco5pk/Kconfig b/board/8dtech/eco5pk/Kconfig index fb1b308..0af1b30 100644 --- a/board/8dtech/eco5pk/Kconfig +++ b/board/8dtech/eco5pk/Kconfig @@ -1,9 +1,5 @@ if TARGET_ECO5PK

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "eco5pk" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "8dtech"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "eco5pk" diff --git a/board/comelit/dig297/Kconfig b/board/comelit/dig297/Kconfig index d7a2bf2..4c5ea09 100644 --- a/board/comelit/dig297/Kconfig +++ b/board/comelit/dig297/Kconfig @@ -1,9 +1,5 @@ if TARGET_DIG297

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "dig297" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "comelit"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "dig297" diff --git a/board/compulab/cm_t35/Kconfig b/board/compulab/cm_t35/Kconfig index fd960bc..06de692 100644 --- a/board/compulab/cm_t35/Kconfig +++ b/board/compulab/cm_t35/Kconfig @@ -1,9 +1,5 @@ if TARGET_CM_T35

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "cm_t35" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "compulab"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "cm_t35" diff --git a/board/corscience/tricorder/Kconfig b/board/corscience/tricorder/Kconfig index a1e06e7..5147fd7 100644 --- a/board/corscience/tricorder/Kconfig +++ b/board/corscience/tricorder/Kconfig @@ -1,9 +1,5 @@ if TARGET_TRICORDER

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "tricorder" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "corscience"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "tricorder" diff --git a/board/htkw/mcx/Kconfig b/board/htkw/mcx/Kconfig index 1e2c679..343ff4d 100644 --- a/board/htkw/mcx/Kconfig +++ b/board/htkw/mcx/Kconfig @@ -1,9 +1,5 @@ if TARGET_MCX

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "mcx" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "htkw"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "mcx" diff --git a/board/isee/igep00x0/Kconfig b/board/isee/igep00x0/Kconfig index c9f2969..c9352fd 100644 --- a/board/isee/igep00x0/Kconfig +++ b/board/isee/igep00x0/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP3_IGEP00X0

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "igep00x0" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "isee"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_igep00x0" diff --git a/board/logicpd/am3517evm/Kconfig b/board/logicpd/am3517evm/Kconfig index 9bc5ae5..1012d3d 100644 --- a/board/logicpd/am3517evm/Kconfig +++ b/board/logicpd/am3517evm/Kconfig @@ -1,9 +1,5 @@ if TARGET_AM3517_EVM

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "am3517evm" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "logicpd"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "am3517_evm" diff --git a/board/logicpd/omap3som/Kconfig b/board/logicpd/omap3som/Kconfig index daaefa6..adeaf4d 100644 --- a/board/logicpd/omap3som/Kconfig +++ b/board/logicpd/omap3som/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP3_LOGIC

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "omap3som" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "logicpd"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_logic" diff --git a/board/logicpd/zoom1/Kconfig b/board/logicpd/zoom1/Kconfig index 3199130..e9a5623 100644 --- a/board/logicpd/zoom1/Kconfig +++ b/board/logicpd/zoom1/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP3_ZOOM1

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "zoom1" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "logicpd"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_zoom1" diff --git a/board/matrix_vision/mvblx/Kconfig b/board/matrix_vision/mvblx/Kconfig index d89c1e3..69f0566 100644 --- a/board/matrix_vision/mvblx/Kconfig +++ b/board/matrix_vision/mvblx/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP3_MVBLX

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "mvblx" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "matrix_vision"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_mvblx" diff --git a/board/nokia/rx51/Kconfig b/board/nokia/rx51/Kconfig index 41d0daa..faa90d2 100644 --- a/board/nokia/rx51/Kconfig +++ b/board/nokia/rx51/Kconfig @@ -1,9 +1,5 @@ if TARGET_NOKIA_RX51

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "rx51" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "nokia"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "nokia_rx51" diff --git a/board/overo/Kconfig b/board/overo/Kconfig index 1d4a261..d1ea236 100644 --- a/board/overo/Kconfig +++ b/board/overo/Kconfig @@ -1,17 +1,9 @@ if TARGET_OMAP3_OVERO

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "overo"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_overo" diff --git a/board/pandora/Kconfig b/board/pandora/Kconfig index a36c0c8..6f41005 100644 --- a/board/pandora/Kconfig +++ b/board/pandora/Kconfig @@ -1,17 +1,9 @@ if TARGET_OMAP3_PANDORA

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "pandora"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_pandora" diff --git a/board/technexion/tao3530/Kconfig b/board/technexion/tao3530/Kconfig index 06e56a4..910a9cd 100644 --- a/board/technexion/tao3530/Kconfig +++ b/board/technexion/tao3530/Kconfig @@ -1,9 +1,5 @@ if TARGET_TAO3530

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "tao3530" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "technexion"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "tao3530" diff --git a/board/technexion/twister/Kconfig b/board/technexion/twister/Kconfig index 1790f6d..e6f811a 100644 --- a/board/technexion/twister/Kconfig +++ b/board/technexion/twister/Kconfig @@ -1,9 +1,5 @@ if TARGET_TWISTER

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "twister" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "technexion"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "twister" diff --git a/board/teejet/mt_ventoux/Kconfig b/board/teejet/mt_ventoux/Kconfig index 96cf7c0..a567204 100644 --- a/board/teejet/mt_ventoux/Kconfig +++ b/board/teejet/mt_ventoux/Kconfig @@ -1,9 +1,5 @@ if TARGET_MT_VENTOUX

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "mt_ventoux" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "teejet"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "mt_ventoux" diff --git a/board/ti/am3517crane/Kconfig b/board/ti/am3517crane/Kconfig index fdb20ab..c44dab5 100644 --- a/board/ti/am3517crane/Kconfig +++ b/board/ti/am3517crane/Kconfig @@ -1,9 +1,5 @@ if TARGET_AM3517_CRANE

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "am3517crane" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "am3517_crane" diff --git a/board/ti/beagle/Kconfig b/board/ti/beagle/Kconfig index 15dccdf..10c81c2 100644 --- a/board/ti/beagle/Kconfig +++ b/board/ti/beagle/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP3_BEAGLE

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "beagle" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_beagle" diff --git a/board/ti/evm/Kconfig b/board/ti/evm/Kconfig index e342942..c54ce33 100644 --- a/board/ti/evm/Kconfig +++ b/board/ti/evm/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP3_EVM

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "evm" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_evm" @@ -24,10 +16,6 @@ endif

if TARGET_OMAP3_EVM_QUICK_MMC

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "evm" @@ -36,10 +24,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_evm_quick_mmc" @@ -48,10 +32,6 @@ endif

if TARGET_OMAP3_EVM_QUICK_NAND

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "evm" @@ -60,10 +40,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_evm_quick_nand" diff --git a/board/ti/sdp3430/Kconfig b/board/ti/sdp3430/Kconfig index 81989b7..fcf7329 100644 --- a/board/ti/sdp3430/Kconfig +++ b/board/ti/sdp3430/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP3_SDP3430

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "sdp3430" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "omap3_sdp3430" diff --git a/board/timll/devkit8000/Kconfig b/board/timll/devkit8000/Kconfig index d9c920c..d1603f4 100644 --- a/board/timll/devkit8000/Kconfig +++ b/board/timll/devkit8000/Kconfig @@ -1,9 +1,5 @@ if TARGET_DEVKIT8000

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "devkit8000" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "timll"

-config SYS_SOC - string - default "omap3" - config SYS_CONFIG_NAME string default "devkit8000" diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig index ec93224..cf9d8c7 100644 --- a/configs/am3517_crane_defconfig +++ b/configs/am3517_crane_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_AM3517_CRANE=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 1fab6c1..2336f1e 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_AM3517_EVM=y diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index 00b0590..2bb616f 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_CM_T35=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 7c5d222..578ae74 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_DEVKIT8000=y diff --git a/configs/dig297_defconfig b/configs/dig297_defconfig index 9309ac2..95bc353 100644 --- a/configs/dig297_defconfig +++ b/configs/dig297_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_OMAP34XX=y CONFIG_TARGET_DIG297=y diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig index 79f3d5a..e45bdad 100644 --- a/configs/eco5pk_defconfig +++ b/configs/eco5pk_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_ECO5PK=y diff --git a/configs/igep0020_defconfig b/configs/igep0020_defconfig index e99f773..dd56ea1 100644 --- a/configs/igep0020_defconfig +++ b/configs/igep0020_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_IGEP00X0=y diff --git a/configs/igep0020_nand_defconfig b/configs/igep0020_nand_defconfig index baa4a0a..da54da0 100644 --- a/configs/igep0020_nand_defconfig +++ b/configs/igep0020_nand_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_IGEP00X0=y diff --git a/configs/igep0030_defconfig b/configs/igep0030_defconfig index 5f404eb..1025fed 100644 --- a/configs/igep0030_defconfig +++ b/configs/igep0030_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_IGEP00X0=y diff --git a/configs/igep0030_nand_defconfig b/configs/igep0030_nand_defconfig index a43dfec..b3b3366 100644 --- a/configs/igep0030_nand_defconfig +++ b/configs/igep0030_nand_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_IGEP00X0=y diff --git a/configs/igep0032_defconfig b/configs/igep0032_defconfig index c0d019c..faa04f7 100644 --- a/configs/igep0032_defconfig +++ b/configs/igep0032_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_IGEP00X0=y diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig index a700c88..c2031f8 100644 --- a/configs/mcx_defconfig +++ b/configs/mcx_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_MCX=y diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig index 0fcad87..a0678bb 100644 --- a/configs/mt_ventoux_defconfig +++ b/configs/mt_ventoux_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_MT_VENTOUX=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 055a602..e03f586 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_OMAP34XX=y CONFIG_TARGET_NOKIA_RX51=y diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index a37ca60..a3e4c2c 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="NAND" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_BEAGLE=y diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 284abe1..c749aa7 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_EVM=y diff --git a/configs/omap3_evm_quick_mmc_defconfig b/configs/omap3_evm_quick_mmc_defconfig index 5bafeac..e89bb82 100644 --- a/configs/omap3_evm_quick_mmc_defconfig +++ b/configs/omap3_evm_quick_mmc_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y diff --git a/configs/omap3_evm_quick_nand_defconfig b/configs/omap3_evm_quick_nand_defconfig index 501e46f..e70fddd 100644 --- a/configs/omap3_evm_quick_nand_defconfig +++ b/configs/omap3_evm_quick_nand_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig index a183fe7..50bffa9 100644 --- a/configs/omap3_ha_defconfig +++ b/configs/omap3_ha_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TAO3530=y diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 6278554..5f2c063 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_LOGIC=y diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig index b7ddcc8..fb6edc2 100644 --- a/configs/omap3_mvblx_defconfig +++ b/configs/omap3_mvblx_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_MVBLX=y diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig index dca3237..7e0d334 100644 --- a/configs/omap3_overo_defconfig +++ b/configs/omap3_overo_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_OVERO=y diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig index 54dab48..bf28537 100644 --- a/configs/omap3_pandora_defconfig +++ b/configs/omap3_pandora_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_PANDORA=y diff --git a/configs/omap3_sdp3430_defconfig b/configs/omap3_sdp3430_defconfig index 9672956..1172c2a 100644 --- a/configs/omap3_sdp3430_defconfig +++ b/configs/omap3_sdp3430_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_SDP3430=y diff --git a/configs/omap3_zoom1_defconfig b/configs/omap3_zoom1_defconfig index f4c8ed9..e2d0a8c 100644 --- a/configs/omap3_zoom1_defconfig +++ b/configs/omap3_zoom1_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_ZOOM1=y diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig index d8b57b1..a511389 100644 --- a/configs/tao3530_defconfig +++ b/configs/tao3530_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TAO3530=y diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index 80c2df4..7ea5e02 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TRICORDER=y diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig index 6715e71..f6e1c46 100644 --- a/configs/tricorder_flash_defconfig +++ b/configs/tricorder_flash_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD" +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TRICORDER=y diff --git a/configs/twister_defconfig b/configs/twister_defconfig index 27e8364..9023736 100644 --- a/configs/twister_defconfig +++ b/configs/twister_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TWISTER=y diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 898ed2e..fcb4033 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ #define CONFIG_OMAP_COMMON

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 1e2d55b..c5d64ca 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */ #define CONFIG_OMAP_COMMON

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index c63608c..70df1eb 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -21,7 +21,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_GPIO #define CONFIG_CMD_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 69c51bc..7ab6d51 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -17,7 +17,6 @@

/* High Level Configuration Options */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 #define CONFIG_OMAP_GPIO diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 7e47c56..c8739ed 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -28,7 +28,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON

diff --git a/include/configs/mcx.h b/include/configs/mcx.h index dff895a..cd85a6c 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -13,7 +13,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_MCX /* working with mcx */ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 43c1617..982b689 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -24,7 +24,6 @@ */

#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3430 /* which is in a 3430 */ #define CONFIG_OMAP3_RX51 /* working with RX51 */ #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index eef4230..8885e17 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -13,7 +13,6 @@ * High level configuration options */ #define CONFIG_OMAP /* This is TI OMAP core */ -#define CONFIG_OMAP34XX /* belonging to 34XX family */ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 717c935..aeb385f 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -15,7 +15,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index a3dcb15..f3c21c4 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -20,7 +20,6 @@ */ #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ #define CONFIG_MACH_TYPE MACH_TYPE_MVBLX #define CONFIG_OMAP_GPIO diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index c22c1fc..45feeb5 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -14,7 +14,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_PANDORA 1 /* working with pandora */ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index a3e8a59..ac307eb 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -21,7 +21,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ #define CONFIG_OMAP_COMMON

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index e1fc754..c2ba0d1 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -14,7 +14,6 @@ * High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 174bfe5..8d2db27 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -18,7 +18,6 @@ */ #define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */

#define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index ade35d2..3b19d3d 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -14,7 +14,6 @@ #ifndef __CONFIG_TI_OMAP3_COMMON_H__ #define __CONFIG_TI_OMAP3_COMMON_H__

-#define CONFIG_OMAP34XX

#include <asm/arch/cpu.h> #include <asm/arch/omap3.h> diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index cc0d172..6ddf3d5 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -18,7 +18,6 @@

/* High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_COMMON

#define CONFIG_MACH_TYPE MACH_TYPE_TRICORDER

Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP5 board select menu to omap5/Kconfig.

Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap5").

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Lokesh Vutla lokeshvutla@ti.com Reviewed-by: Tom Rini trini@ti.com ---

Changes in v2: None

arch/arm/Kconfig | 15 ++++----------- arch/arm/cpu/armv7/omap5/Kconfig | 29 +++++++++++++++++++++++++++++ board/compulab/cm_t54/Kconfig | 8 -------- board/ti/dra7xx/Kconfig | 8 -------- board/ti/omap5_uevm/Kconfig | 8 -------- configs/cm_t54_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_evm_qspiboot_defconfig | 1 + configs/dra7xx_evm_uart3_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + include/configs/ti_omap5_common.h | 1 - 11 files changed, 38 insertions(+), 36 deletions(-) create mode 100644 arch/arm/cpu/armv7/omap5/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bad0c5d..fd8bc59 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -406,14 +406,8 @@ config OMAP34XX config OMAP44XX bool "OMAP44XX SoC"

-config TARGET_CM_T54 - bool "Support cm_t54" - -config TARGET_DRA7XX_EVM - bool "Support dra7xx_evm" - -config TARGET_OMAP5_UEVM - bool "Support omap5_uevm" +config OMAP54XX + bool "OMAP54XX SoC"

config RMOBILE bool "Renesas ARM SoCs" @@ -515,6 +509,8 @@ source "arch/arm/cpu/armv7/omap3/Kconfig"

source "arch/arm/cpu/armv7/omap4/Kconfig"

+source "arch/arm/cpu/armv7/omap5/Kconfig" + source "arch/arm/cpu/armv7/rmobile/Kconfig"

source "arch/arm/cpu/armv7/tegra-common/Kconfig" @@ -561,7 +557,6 @@ source "board/cirrus/edb93xx/Kconfig" source "board/cm4008/Kconfig" source "board/cm41xx/Kconfig" source "board/compulab/cm_t335/Kconfig" -source "board/compulab/cm_t54/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" source "board/creative/xfi3/Kconfig" source "board/davedenx/qong/Kconfig" @@ -645,9 +640,7 @@ source "board/syteco/zmx25/Kconfig" source "board/taskit/stamp9g20/Kconfig" source "board/ti/am335x/Kconfig" source "board/ti/am43xx/Kconfig" -source "board/ti/dra7xx/Kconfig" source "board/ti/ks2_evm/Kconfig" -source "board/ti/omap5_uevm/Kconfig" source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" source "board/ti/tnetv107xevm/Kconfig" diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig new file mode 100644 index 0000000..be80393 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/Kconfig @@ -0,0 +1,29 @@ +if OMAP54XX + +choice + prompt "OMAP5 board select" + +config TARGET_CM_T54 + bool "CompuLab CM-T54" + +config TARGET_OMAP5_UEVM + bool "TI OMAP5 uEVM board" + +config TARGET_DRA7XX_EVM + bool "TI DRA7XX" + +endchoice + +config SYS_CPU + string + default "armv7" + +config SYS_SOC + string + default "omap5" + +source "board/compulab/cm_t54/Kconfig" +source "board/ti/omap5_uevm/Kconfig" +source "board/ti/dra7xx/Kconfig" + +endif diff --git a/board/compulab/cm_t54/Kconfig b/board/compulab/cm_t54/Kconfig index 0fe3692..0edab5c 100644 --- a/board/compulab/cm_t54/Kconfig +++ b/board/compulab/cm_t54/Kconfig @@ -1,9 +1,5 @@ if TARGET_CM_T54

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "cm_t54" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "compulab"

-config SYS_SOC - string - default "omap5" - config SYS_CONFIG_NAME string default "cm_t54" diff --git a/board/ti/dra7xx/Kconfig b/board/ti/dra7xx/Kconfig index 4b13ef4..9ee13c5 100644 --- a/board/ti/dra7xx/Kconfig +++ b/board/ti/dra7xx/Kconfig @@ -1,9 +1,5 @@ if TARGET_DRA7XX_EVM

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "dra7xx" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap5" - config SYS_CONFIG_NAME string default "dra7xx_evm" diff --git a/board/ti/omap5_uevm/Kconfig b/board/ti/omap5_uevm/Kconfig index 7c7d5dc..3592e7b 100644 --- a/board/ti/omap5_uevm/Kconfig +++ b/board/ti/omap5_uevm/Kconfig @@ -1,9 +1,5 @@ if TARGET_OMAP5_UEVM

-config SYS_CPU - string - default "armv7" - config SYS_BOARD string default "omap5_uevm" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "ti"

-config SYS_SOC - string - default "omap5" - config SYS_CONFIG_NAME string default "omap5_uevm" diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig index b48a171..32efaa2 100644 --- a/configs/cm_t54_defconfig +++ b/configs/cm_t54_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP54XX=y +S:CONFIG_TARGET_CM_T54=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 82cffd7..297c6b5 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" +S:CONFIG_ARM=y ++S:CONFIG_OMAP54XX=y +S:CONFIG_TARGET_DRA7XX_EVM=y diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig index be09f40..92417f2 100644 --- a/configs/dra7xx_evm_qspiboot_defconfig +++ b/configs/dra7xx_evm_qspiboot_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,QSPI_BOOT" +S:CONFIG_ARM=y ++S:CONFIG_OMAP54XX=y +S:CONFIG_TARGET_DRA7XX_EVM=y diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig index e0d1e45..3551317 100644 --- a/configs/dra7xx_evm_uart3_defconfig +++ b/configs/dra7xx_evm_uart3_defconfig @@ -1,4 +1,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3,SPL_YMODEM_SUPPORT" +S:CONFIG_ARM=y ++S:CONFIG_OMAP54XX=y +S:CONFIG_TARGET_DRA7XX_EVM=y diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index 7a19ce9..86d5c16 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -1,3 +1,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y ++S:CONFIG_OMAP54XX=y +S:CONFIG_TARGET_OMAP5_UEVM=y diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index cb928ab..3166392 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -17,7 +17,6 @@ #ifndef __CONFIG_TI_OMAP5_COMMON_H #define __CONFIG_TI_OMAP5_COMMON_H

-#define CONFIG_OMAP54XX #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R

Becuase the board select menu in arch/arm/Kconfig is too big, move the Orion5x board select menu to orion5x/Kconfig.

Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="orion5x").

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Albert ARIBAUD albert.u.boot@aribaud.net ---

Changes in v2: None

arch/arm/Kconfig | 7 ++++--- arch/arm/cpu/arm926ejs/orion5x/Kconfig | 21 +++++++++++++++++++++ board/LaCie/edminiv2/Kconfig | 8 -------- configs/edminiv2_defconfig | 1 + include/configs/edminiv2.h | 1 - 5 files changed, 26 insertions(+), 12 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/orion5x/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2e8cd2a..74a4e4b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -193,8 +193,8 @@ config TARGET_SC_SPS_1 config TARGET_NHK8815 bool "Support nhk8815"

-config TARGET_EDMINIV2 - bool "Support edminiv2" +config ORION5X + bool "Marvell Orion"

config TARGET_DKB bool "Support dkb" @@ -510,6 +510,8 @@ source "arch/arm/cpu/armv7/omap4/Kconfig"

source "arch/arm/cpu/armv7/omap5/Kconfig"

+source "arch/arm/cpu/arm926ejs/orion5x/Kconfig" + source "arch/arm/cpu/armv7/rmobile/Kconfig"

source "arch/arm/cpu/armv7/tegra-common/Kconfig" @@ -523,7 +525,6 @@ source "board/BuR/tseries/Kconfig" source "board/BuS/eb_cpux9k2/Kconfig" source "board/BuS/vl_ma2sc/Kconfig" source "board/CarMediaLab/flea3/Kconfig" -source "board/LaCie/edminiv2/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/dkb/Kconfig" source "board/Marvell/gplugd/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/orion5x/Kconfig b/arch/arm/cpu/arm926ejs/orion5x/Kconfig new file mode 100644 index 0000000..aa40099 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/orion5x/Kconfig @@ -0,0 +1,21 @@ +if ORION5X + +choice + prompt "Marvell Orion board select" + +config TARGET_EDMINIV2 + bool "LaCie Ethernet Disk mini V2" + +endchoice + +config SYS_CPU + string + default "arm926ejs" + +config SYS_SOC + string + default "orion5x" + +source "board/LaCie/edminiv2/Kconfig" + +endif diff --git a/board/LaCie/edminiv2/Kconfig b/board/LaCie/edminiv2/Kconfig index f1151d1..9675a9e 100644 --- a/board/LaCie/edminiv2/Kconfig +++ b/board/LaCie/edminiv2/Kconfig @@ -1,9 +1,5 @@ if TARGET_EDMINIV2

-config SYS_CPU - string - default "arm926ejs" - config SYS_BOARD string default "edminiv2" @@ -12,10 +8,6 @@ config SYS_VENDOR string default "LaCie"

-config SYS_SOC - string - default "orion5x" - config SYS_CONFIG_NAME string default "edminiv2" diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index 82aa684..3b1a6c1 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y +CONFIG_ORION5X=y CONFIG_TARGET_EDMINIV2=y diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 77717a8..1df4fc1 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -25,7 +25,6 @@ #define CONFIG_MARVELL 1 #define CONFIG_ARM926EJS 1 /* Basic Architecture */ #define CONFIG_FEROCEON 1 /* CPU Core subversion */ -#define CONFIG_ORION5X 1 /* SOC Family Name */ #define CONFIG_88F5182 1 /* SOC Name */ #define CONFIG_MACH_EDMINIV2 1 /* Machine type */

Becuase the board select menu in arch/arm/Kconfig is too big, move the Nomadik board select menu to nomadik/Kconfig.

Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="nomadik").

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

Changes in v2: None

arch/arm/Kconfig | 7 ++++--- arch/arm/cpu/arm926ejs/nomadik/Kconfig | 21 +++++++++++++++++++++ board/st/nhk8815/Kconfig | 10 +--------- configs/nhk8815_defconfig | 3 ++- configs/nhk8815_onenand_defconfig | 3 ++- include/configs/nhk8815.h | 2 -- 6 files changed, 30 insertions(+), 16 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/nomadik/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3ffadb6..54e78cc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -190,8 +190,8 @@ config TARGET_SANSA_FUZE_PLUS config TARGET_SC_SPS_1 bool "Support sc_sps_1"

-config TARGET_NHK8815 - bool "Support nhk8815" +config ARCH_NOMADIK + bool "ST-Ericsson Nomadik"

config ORION5X bool "Marvell Orion" @@ -506,6 +506,8 @@ source "arch/arm/cpu/armv7/keystone/Kconfig"

source "arch/arm/cpu/arm926ejs/kirkwood/Kconfig"

+source "arch/arm/cpu/arm926ejs/nomadik/Kconfig" + source "arch/arm/cpu/armv7/omap3/Kconfig"

source "arch/arm/cpu/armv7/omap4/Kconfig" @@ -634,7 +636,6 @@ source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st-ericsson/snowball/Kconfig" source "board/st-ericsson/u8500/Kconfig" -source "board/st/nhk8815/Kconfig" source "board/sunxi/Kconfig" source "board/syteco/jadecpu/Kconfig" source "board/syteco/zmx25/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/nomadik/Kconfig b/arch/arm/cpu/arm926ejs/nomadik/Kconfig new file mode 100644 index 0000000..7177800 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/nomadik/Kconfig @@ -0,0 +1,21 @@ +if ARCH_NOMADIK + +choice + prompt "Nomadik board select" + +config NOMADIK_NHK8815 + bool "ST 8815 Nomadik Hardware Kit" + +endchoice + +config SYS_CPU + string + default "arm926ejs" + +config SYS_SOC + string + default "nomadik" + +source "board/st/nhk8815/Kconfig" + +endif diff --git a/board/st/nhk8815/Kconfig b/board/st/nhk8815/Kconfig index ec3f880..ba2e7c2 100644 --- a/board/st/nhk8815/Kconfig +++ b/board/st/nhk8815/Kconfig @@ -1,8 +1,4 @@ -if TARGET_NHK8815 - -config SYS_CPU - string - default "arm926ejs" +if NOMADIK_NHK8815

config SYS_BOARD string @@ -12,10 +8,6 @@ config SYS_VENDOR string default "st"

-config SYS_SOC - string - default "nomadik" - config SYS_CONFIG_NAME string default "nhk8815" diff --git a/configs/nhk8815_defconfig b/configs/nhk8815_defconfig index 3d20199..f661226 100644 --- a/configs/nhk8815_defconfig +++ b/configs/nhk8815_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y -CONFIG_TARGET_NHK8815=y +CONFIG_ARCH_NOMADIK=y +CONFIG_NOMADIK_NHK8815=y diff --git a/configs/nhk8815_onenand_defconfig b/configs/nhk8815_onenand_defconfig index 860ae92..dd8048d 100644 --- a/configs/nhk8815_onenand_defconfig +++ b/configs/nhk8815_onenand_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="BOOT_ONENAND" CONFIG_ARM=y -CONFIG_TARGET_NHK8815=y +CONFIG_ARCH_NOMADIK=y +CONFIG_NOMADIK_NHK8815=y diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 4d3428c..5419f55 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -13,9 +13,7 @@ #include <nomadik.h>

#define CONFIG_ARM926EJS -#define CONFIG_NOMADIK #define CONFIG_NOMADIK_8815 /* cpu variant */ -#define CONFIG_NOMADIK_NHK8815 /* board variant */

#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */