I would like to implement the functionality found in flash.c for many boards for my board. There seems to be a lot of overlap between them. Is there one that is better than others to start with as a base? My board has a single Intel TE28F128 flash chip, is based on the AMD AU1500, and is currently booting u-boot. I started by trying to modify the flash.c from the a3000 board, but now after u-boot loads any command at the prompt results in u-boot hanging. If I revert to the orginal flash.c I was using from the dbau1x00 boards, commands work properly, but I lack the flash commands.

Ed Okerson