Hi,

I am using BDI2000 with an 8270 right now and it works fine. Its just the standard package for ppc 6xx/7xx/82xx/7400/7410. I used the configuration file for the vads8260 and fixed it up for my board (a custom unit). I don't have a config for the pq2vads board I'm afraid.

Chris.

Matias Sundman (TB/EAB) wrote:

Comrades, I have compiled uboot for the PQ2VADS Motorola evaluation board and tried to flash it with a JTAG probe from GreenHills. Unfortunately their probe does not support the 8270 architecture today.

Does BDI2000 support the ppc8270 JTAG chain architecture?

If so , does someone have a configuration file for the PQ2VADS Motorola evaluation board?

Best Regards // Matias

---

This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users