po 14. 3. 2022 v 15:26 odesílatel Michal Simek michal.simek@xilinx.com napsal:

Production SOM has emmc on it and make sense to describe pin description to be able use EMMC if it is not configured via psu_init. (Still some regs are not handled but this is one step in that direction)

Signed-off-by: Michal Simek michal.simek@xilinx.com

arch/arm/dts/zynqmp-sm-k26-revA.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)

diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts index b437d713ca8f..e904cd8ea093 100644 --- a/arch/arm/dts/zynqmp-sm-k26-revA.dts +++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts @@ -14,6 +14,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>

/ { model = "ZynqMP SM-K26 Rev1/B/A"; @@ -92,6 +93,23 @@ status = "okay"; };

+&pinctrl0 {

•   status = "okay";
  

•   pinctrl_sdhci0_default: sdhci0-default {
  

•           conf {
  

•                   groups = "sdio0_0_grp";
  

•                   slew-rate = <SLEW_RATE_SLOW>;
  

•                   power-source = <IO_STANDARD_LVCMOS18>;
  

•                   bias-disable;
  

•           };
  

•           mux {
  

•                   groups = "sdio0_0_grp";
  

•                   function = "sdio0";
  

•           };
  

•   };
  

+};

&qspi { /* MIO 0-5 - U143 */ status = "okay"; flash@0 { /* MT25QU512A */ @@ -185,6 +203,8 @@

&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ status = "okay";

•   pinctrl-names = "default";
  

•   pinctrl-0 = <&pinctrl_sdhci0_default>;
    non-removable;
    disable-wp;
    bus-width = <8>;
  

-- 2.35.1

Applied. M