[U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liu r64343@freescale.com Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- board/freescale/mx53loco/mx53loco.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index b4c7f33..5e5c38f 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -139,6 +139,9 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = { int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); + mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(77); /*GPIO3_13*/
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- board/freescale/mx53ard/mx53ard.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index be32aee..e5a1142 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -87,6 +87,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1); + mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1); + if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(1); /*GPIO1_1*/ else
On 11/15/2011 04:51 PM, Fabio Estevam wrote:
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevamfabio.estevam@freescale.com
board/freescale/mx53ard/mx53ard.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index be32aee..e5a1142 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -87,6 +87,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
- mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
- if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(1); /*GPIO1_1*/ else
Applied to u-boot-imx, thanks
Best regards, Stefano Babic
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liu r64343@freescale.com Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- board/freescale/mx53evk/mx53evk.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index 335661f..aa4a2c9 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -212,6 +212,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); + mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); + if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(77); /*GPIO3_13*/ else
2011/11/15 Fabio Estevam festevam@gmail.com:
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liu r64343@freescale.com Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
Acked-by: Jason Liu jason.hui@linaro.org
board/freescale/mx53evk/mx53evk.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index 335661f..aa4a2c9 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -212,6 +212,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(77); /*GPIO3_13*/ else -- 1.7.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
On 11/15/2011 04:51 PM, Fabio Estevam wrote:
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liur64343@freescale.com Signed-off-by: Fabio Estevamfabio.estevam@freescale.com
board/freescale/mx53evk/mx53evk.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index 335661f..aa4a2c9 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -212,6 +212,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(77); /*GPIO3_13*/ else
Applied to u-boot-imx, thanks
Best regards, Stefano Babic
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- board/freescale/mx53smd/mx53smd.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index 87fa7fa..55af4e4 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -134,6 +134,7 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
int board_mmc_getcd(u8 *cd, struct mmc *mmc) { + mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); *cd = gpio_get_value(77); /*GPIO3_13*/
return 0;
On 11/15/2011 04:51 PM, Fabio Estevam wrote:
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevamfabio.estevam@freescale.com
board/freescale/mx53smd/mx53smd.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index 87fa7fa..55af4e4 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -134,6 +134,7 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
int board_mmc_getcd(u8 *cd, struct mmc *mmc) {
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); *cd = gpio_get_value(77); /*GPIO3_13*/
return 0;
Applied to u-boot-imx, thanks
Best regards, Stefano Babic
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- board/freescale/mx51evk/mx51evk.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 37e6e4d..e5b0929 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -265,6 +265,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1); + mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); + if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(0); else
On 11/15/2011 04:51 PM, Fabio Estevam wrote:
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevamfabio.estevam@freescale.com
board/freescale/mx51evk/mx51evk.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 37e6e4d..e5b0929 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -265,6 +265,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
- mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
- if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(0); else
Applied to u-boot-imx, thanks
Best regards, Stefano Babic
2011/11/15 Fabio Estevam festevam@gmail.com:
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liu r64343@freescale.com Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
Acked-by: Jason Liu jason.hui@linaro.org
board/freescale/mx53loco/mx53loco.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index b4c7f33..5e5c38f 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -139,6 +139,9 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = { int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(77); /*GPIO3_13*/ -- 1.7.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
On 11/15/2011 04:51 PM, Fabio Estevam wrote:
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liur64343@freescale.com Signed-off-by: Fabio Estevamfabio.estevam@freescale.com
board/freescale/mx53loco/mx53loco.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
Applied to u-boot-imx, thanks
Best regards, Stefano Babic
participants (3)
-
Fabio Estevam -
Jason Liu -
Stefano Babic