[U-Boot] U-Boot 2009.11 ( 2��月 05 2010 - 23:46:51) how two question marks generated.
I try to port U-Boot 2009.11 to s3c2440, something success. as follows:
U-Boot 2009.11 ( 2��月 05 2010 - 23:46:51)
DRAM: 64 MB Flash: 2 MB NAND: NAND_ECC_NONE selected by board driver. This is not recommended !! 64 MiB In: serial Out: serial Err: serial Net: dm9000
----------------------------------------------------------------------------------------------------------------
but how two question marks generated? and replies appreciated. linzhavon
Dear linzhavon,
In message 9c4bdd041002060104k2ff29a02mfffa83c15b70a910@mail.gmail.com you wrote:
I try to port U-Boot 2009.11 to s3c2440, something success. as follows:
U-Boot 2009.11 ( 2=EF=BF=BD=EF=BF=BD=E6=9C=88 05 2010 - 23:46:51)
DRAM: 64 MB Flash: 2 MB NAND: NAND_ECC_NONE selected by board driver. This is not recommended !! 64 MiB In: serial Out: serial Err: serial Net: dm9000
---------------------------------------------------------------------------=
but how two question marks generated? and replies appreciated.
Where do you see two question marks?
Best regards,
Wolfgang Denk
participants (2)
-
linzhavon -
Wolfgang Denk