Hi, After good start I'm back to square one in my debugging session. After a while and with help on this list I managed to get target resetted and did some tests. After a while the same problem appeared - BDI2000 can not reset target and fails with message: - TARGET: processing reset request - TARGET: BDI asserts RESET and TRST - TARGET: BDI removed TRST - TARGET: Bypass check: 0x000000001 => 0x00FFFFFF - TARGET: JTAG exists check failed # TARGET: resetting target failed # JTAG: communication with target failed - TARGET: target will be restarted in 10 sec

I'm pretty sure that JTAG cable for first target is OK, since it was working a while ago, and I also tested BDI2000 with another PXA target and the same error emerges there (with this target I have direct connection between BDI2000 and target JTAG).

Any help is appreciated...

regards, hk