From: Peng Fan peng.fan@nxp.com

Add i.MX8QXP pads definition

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- include/dt-bindings/pinctrl/pads-imx8qxp.h | 757 +++++++++++++++++++++ 1 file changed, 757 insertions(+) create mode 100644 include/dt-bindings/pinctrl/pads-imx8qxp.h

diff --git a/include/dt-bindings/pinctrl/pads-imx8qxp.h b/include/dt-bindings/pinctrl/pads-imx8qxp.h new file mode 100644 index 0000000000..41f4fe564c --- /dev/null +++ b/include/dt-bindings/pinctrl/pads-imx8qxp.h @@ -0,0 +1,757 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef _SC_PADS_H +#define _SC_PADS_H + +#define SC_P_PCIE_CTRL0_PERST_B 0 /* HSIO.PCIE0.PERST_B, LSIO.GPIO4.IO00 */ +#define SC_P_PCIE_CTRL0_CLKREQ_B 1 /* HSIO.PCIE0.CLKREQ_B, LSIO.GPIO4.IO01 */ +#define SC_P_PCIE_CTRL0_WAKE_B 2 /* HSIO.PCIE0.WAKE_B, LSIO.GPIO4.IO02 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_PCIESEP 3 /* */ +#define SC_P_USB_SS3_TC0 4 /* ADMA.I2C1.SCL, CONN.USB_OTG1.PWR, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO03 */ +#define SC_P_USB_SS3_TC1 5 /* ADMA.I2C1.SCL, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO04 */ +#define SC_P_USB_SS3_TC2 6 /* ADMA.I2C1.SDA, CONN.USB_OTG1.OC, CONN.USB_OTG2.OC, LSIO.GPIO4.IO05 */ +#define SC_P_USB_SS3_TC3 7 /* ADMA.I2C1.SDA, CONN.USB_OTG2.OC, LSIO.GPIO4.IO06 */ +#define SC_P_COMP_CTL_GPIO_3V3_USB3IO 8 /* */ +#define SC_P_EMMC0_CLK 9 /* CONN.EMMC0.CLK, CONN.NAND.READY_B, LSIO.GPIO4.IO07 */ +#define SC_P_EMMC0_CMD 10 /* CONN.EMMC0.CMD, CONN.NAND.DQS, LSIO.GPIO4.IO08 */ +#define SC_P_EMMC0_DATA0 11 /* CONN.EMMC0.DATA0, CONN.NAND.DATA00, LSIO.GPIO4.IO09 */ +#define SC_P_EMMC0_DATA1 12 /* CONN.EMMC0.DATA1, CONN.NAND.DATA01, LSIO.GPIO4.IO10 */ +#define SC_P_EMMC0_DATA2 13 /* CONN.EMMC0.DATA2, CONN.NAND.DATA02, LSIO.GPIO4.IO11 */ +#define SC_P_EMMC0_DATA3 14 /* CONN.EMMC0.DATA3, CONN.NAND.DATA03, LSIO.GPIO4.IO12 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_SD1FIX0 15 /* */ +#define SC_P_EMMC0_DATA4 16 /* CONN.EMMC0.DATA4, CONN.NAND.DATA04, CONN.EMMC0.WP, LSIO.GPIO4.IO13 */ +#define SC_P_EMMC0_DATA5 17 /* CONN.EMMC0.DATA5, CONN.NAND.DATA05, CONN.EMMC0.VSELECT, LSIO.GPIO4.IO14 */ +#define SC_P_EMMC0_DATA6 18 /* CONN.EMMC0.DATA6, CONN.NAND.DATA06, CONN.MLB.CLK, LSIO.GPIO4.IO15 */ +#define SC_P_EMMC0_DATA7 19 /* CONN.EMMC0.DATA7, CONN.NAND.DATA07, CONN.MLB.SIG, LSIO.GPIO4.IO16 */ +#define SC_P_EMMC0_STROBE 20 /* CONN.EMMC0.STROBE, CONN.NAND.CLE, CONN.MLB.DATA, LSIO.GPIO4.IO17 */ +#define SC_P_EMMC0_RESET_B 21 /* CONN.EMMC0.RESET_B, CONN.NAND.WP_B, LSIO.GPIO4.IO18 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_SD1FIX1 22 /* */ +#define SC_P_USDHC1_RESET_B 23 /* CONN.USDHC1.RESET_B, CONN.NAND.RE_N, ADMA.SPI2.SCK, LSIO.GPIO4.IO19 */ +#define SC_P_USDHC1_VSELECT 24 /* CONN.USDHC1.VSELECT, CONN.NAND.RE_P, ADMA.SPI2.SDO, CONN.NAND.RE_B, LSIO.GPIO4.IO20 */ +#define SC_P_CTL_NAND_RE_P_N 25 /* */ +#define SC_P_USDHC1_WP 26 /* CONN.USDHC1.WP, CONN.NAND.DQS_N, ADMA.SPI2.SDI, LSIO.GPIO4.IO21 */ +#define SC_P_USDHC1_CD_B 27 /* CONN.USDHC1.CD_B, CONN.NAND.DQS_P, ADMA.SPI2.CS0, CONN.NAND.DQS, LSIO.GPIO4.IO22 */ +#define SC_P_CTL_NAND_DQS_P_N 28 /* */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSELSEP 29 /* */ +#define SC_P_USDHC1_CLK 30 /* CONN.USDHC1.CLK, ADMA.UART3.RX, LSIO.GPIO4.IO23 */ +#define SC_P_USDHC1_CMD 31 /* CONN.USDHC1.CMD, CONN.NAND.CE0_B, ADMA.MQS.R, LSIO.GPIO4.IO24 */ +#define SC_P_USDHC1_DATA0 32 /* CONN.USDHC1.DATA0, CONN.NAND.CE1_B, ADMA.MQS.L, LSIO.GPIO4.IO25 */ +#define SC_P_USDHC1_DATA1 33 /* CONN.USDHC1.DATA1, CONN.NAND.RE_B, ADMA.UART3.TX, LSIO.GPIO4.IO26 */ +#define SC_P_USDHC1_DATA2 34 /* CONN.USDHC1.DATA2, CONN.NAND.WE_B, ADMA.UART3.CTS_B, LSIO.GPIO4.IO27 */ +#define SC_P_USDHC1_DATA3 35 /* CONN.USDHC1.DATA3, CONN.NAND.ALE, ADMA.UART3.RTS_B, LSIO.GPIO4.IO28 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSEL3 36 /* */ +#define SC_P_ENET0_RGMII_TXC 37 /* CONN.ENET0.RGMII_TXC, CONN.ENET0.RCLK50M_OUT, CONN.ENET0.RCLK50M_IN, CONN.NAND.CE1_B, LSIO.GPIO4.IO29 */ +#define SC_P_ENET0_RGMII_TX_CTL 38 /* CONN.ENET0.RGMII_TX_CTL, CONN.USDHC1.RESET_B, LSIO.GPIO4.IO30 */ +#define SC_P_ENET0_RGMII_TXD0 39 /* CONN.ENET0.RGMII_TXD0, CONN.USDHC1.VSELECT, LSIO.GPIO4.IO31 */ +#define SC_P_ENET0_RGMII_TXD1 40 /* CONN.ENET0.RGMII_TXD1, CONN.USDHC1.WP, LSIO.GPIO5.IO00 */ +#define SC_P_ENET0_RGMII_TXD2 41 /* CONN.ENET0.RGMII_TXD2, CONN.MLB.CLK, CONN.NAND.CE0_B, CONN.USDHC1.CD_B, LSIO.GPIO5.IO01 */ +#define SC_P_ENET0_RGMII_TXD3 42 /* CONN.ENET0.RGMII_TXD3, CONN.MLB.SIG, CONN.NAND.RE_B, LSIO.GPIO5.IO02 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0 43 /* */ +#define SC_P_ENET0_RGMII_RXC 44 /* CONN.ENET0.RGMII_RXC, CONN.MLB.DATA, CONN.NAND.WE_B, CONN.USDHC1.CLK, LSIO.GPIO5.IO03 */ +#define SC_P_ENET0_RGMII_RX_CTL 45 /* CONN.ENET0.RGMII_RX_CTL, CONN.USDHC1.CMD, LSIO.GPIO5.IO04 */ +#define SC_P_ENET0_RGMII_RXD0 46 /* CONN.ENET0.RGMII_RXD0, CONN.USDHC1.DATA0, LSIO.GPIO5.IO05 */ +#define SC_P_ENET0_RGMII_RXD1 47 /* CONN.ENET0.RGMII_RXD1, CONN.USDHC1.DATA1, LSIO.GPIO5.IO06 */ +#define SC_P_ENET0_RGMII_RXD2 48 /* CONN.ENET0.RGMII_RXD2, CONN.ENET0.RMII_RX_ER, CONN.USDHC1.DATA2, LSIO.GPIO5.IO07 */ +#define SC_P_ENET0_RGMII_RXD3 49 /* CONN.ENET0.RGMII_RXD3, CONN.NAND.ALE, CONN.USDHC1.DATA3, LSIO.GPIO5.IO08 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1 50 /* */ +#define SC_P_ENET0_REFCLK_125M_25M 51 /* CONN.ENET0.REFCLK_125M_25M, CONN.ENET0.PPS, CONN.ENET1.PPS, LSIO.GPIO5.IO09 */ +#define SC_P_ENET0_MDIO 52 /* CONN.ENET0.MDIO, ADMA.I2C3.SDA, CONN.ENET1.MDIO, LSIO.GPIO5.IO10 */ +#define SC_P_ENET0_MDC 53 /* CONN.ENET0.MDC, ADMA.I2C3.SCL, CONN.ENET1.MDC, LSIO.GPIO5.IO11 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOCT 54 /* */ +#define SC_P_ESAI0_FSR 55 /* ADMA.ESAI0.FSR, CONN.ENET1.RCLK50M_OUT, ADMA.LCDIF.D00, CONN.ENET1.RGMII_TXC, CONN.ENET1.RCLK50M_IN */ +#define SC_P_ESAI0_FST 56 /* ADMA.ESAI0.FST, CONN.MLB.CLK, ADMA.LCDIF.D01, CONN.ENET1.RGMII_TXD2, LSIO.GPIO0.IO01 */ +#define SC_P_ESAI0_SCKR 57 /* ADMA.ESAI0.SCKR, ADMA.LCDIF.D02, CONN.ENET1.RGMII_TX_CTL, LSIO.GPIO0.IO02 */ +#define SC_P_ESAI0_SCKT 58 /* ADMA.ESAI0.SCKT, CONN.MLB.SIG, ADMA.LCDIF.D03, CONN.ENET1.RGMII_TXD3, LSIO.GPIO0.IO03 */ +#define SC_P_ESAI0_TX0 59 /* ADMA.ESAI0.TX0, CONN.MLB.DATA, ADMA.LCDIF.D04, CONN.ENET1.RGMII_RXC, LSIO.GPIO0.IO04 */ +#define SC_P_ESAI0_TX1 60 /* ADMA.ESAI0.TX1, ADMA.LCDIF.D05, CONN.ENET1.RGMII_RXD3, LSIO.GPIO0.IO05 */ +#define SC_P_ESAI0_TX2_RX3 61 /* ADMA.ESAI0.TX2_RX3, CONN.ENET1.RMII_RX_ER, ADMA.LCDIF.D06, CONN.ENET1.RGMII_RXD2, LSIO.GPIO0.IO06 */ +#define SC_P_ESAI0_TX3_RX2 62 /* ADMA.ESAI0.TX3_RX2, ADMA.LCDIF.D07, CONN.ENET1.RGMII_RXD1, LSIO.GPIO0.IO07 */ +#define SC_P_ESAI0_TX4_RX1 63 /* ADMA.ESAI0.TX4_RX1, ADMA.LCDIF.D08, CONN.ENET1.RGMII_TXD0, LSIO.GPIO0.IO08 */ +#define SC_P_ESAI0_TX5_RX0 64 /* ADMA.ESAI0.TX5_RX0, ADMA.LCDIF.D09, CONN.ENET1.RGMII_TXD1, LSIO.GPIO0.IO09 */ +#define SC_P_SPDIF0_RX 65 /* ADMA.SPDIF0.RX, ADMA.MQS.R, ADMA.LCDIF.D10, CONN.ENET1.RGMII_RXD0, LSIO.GPIO0.IO10 */ +#define SC_P_SPDIF0_TX 66 /* ADMA.SPDIF0.TX, ADMA.MQS.L, ADMA.LCDIF.D11, CONN.ENET1.RGMII_RX_CTL, LSIO.GPIO0.IO11 */ +#define SC_P_SPDIF0_EXT_CLK 67 /* ADMA.SPDIF0.EXT_CLK, ADMA.LCDIF.D12, CONN.ENET1.REFCLK_125M_25M, LSIO.GPIO0.IO12 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB 68 /* */ +#define SC_P_SPI3_SCK 69 /* ADMA.SPI3.SCK, ADMA.LCDIF.D13, LSIO.GPIO0.IO13 */ +#define SC_P_SPI3_SDO 70 /* ADMA.SPI3.SDO, ADMA.LCDIF.D14, LSIO.GPIO0.IO14 */ +#define SC_P_SPI3_SDI 71 /* ADMA.SPI3.SDI, ADMA.LCDIF.D15, LSIO.GPIO0.IO15 */ +#define SC_P_SPI3_CS0 72 /* ADMA.SPI3.CS0, ADMA.ACM.MCLK_OUT1, ADMA.LCDIF.HSYNC, LSIO.GPIO0.IO16 */ +#define SC_P_SPI3_CS1 73 /* ADMA.SPI3.CS1, ADMA.I2C3.SCL, ADMA.LCDIF.RESET, ADMA.SPI2.CS0, ADMA.LCDIF.D16 */ +#define SC_P_MCLK_IN1 74 /* ADMA.ACM.MCLK_IN1, ADMA.I2C3.SDA, ADMA.LCDIF.EN, ADMA.SPI2.SCK, ADMA.LCDIF.D17 */ +#define SC_P_MCLK_IN0 75 /* ADMA.ACM.MCLK_IN0, ADMA.ESAI0.RX_HF_CLK, ADMA.LCDIF.VSYNC, ADMA.SPI2.SDI, LSIO.GPIO0.IO19 */ +#define SC_P_MCLK_OUT0 76 /* ADMA.ACM.MCLK_OUT0, ADMA.ESAI0.TX_HF_CLK, ADMA.LCDIF.CLK, ADMA.SPI2.SDO, LSIO.GPIO0.IO20 */ +#define SC_P_UART1_TX 77 /* ADMA.UART1.TX, LSIO.PWM0.OUT, LSIO.GPT0.CAPTURE, LSIO.GPIO0.IO21 */ +#define SC_P_UART1_RX 78 /* ADMA.UART1.RX, LSIO.PWM1.OUT, LSIO.GPT0.COMPARE, LSIO.GPT1.CLK, LSIO.GPIO0.IO22 */ +#define SC_P_UART1_RTS_B 79 /* ADMA.UART1.RTS_B, LSIO.PWM2.OUT, ADMA.LCDIF.D16, LSIO.GPT1.CAPTURE, LSIO.GPT0.CLK */ +#define SC_P_UART1_CTS_B 80 /* ADMA.UART1.CTS_B, LSIO.PWM3.OUT, ADMA.LCDIF.D17, LSIO.GPT1.COMPARE, LSIO.GPIO0.IO24 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHK 81 /* */ +#define SC_P_SAI0_TXD 82 /* ADMA.SAI0.TXD, ADMA.SAI1.RXC, ADMA.SPI1.SDO, ADMA.LCDIF.D18, LSIO.GPIO0.IO25 */ +#define SC_P_SAI0_TXC 83 /* ADMA.SAI0.TXC, ADMA.SAI1.TXD, ADMA.SPI1.SDI, ADMA.LCDIF.D19, LSIO.GPIO0.IO26 */ +#define SC_P_SAI0_RXD 84 /* ADMA.SAI0.RXD, ADMA.SAI1.RXFS, ADMA.SPI1.CS0, ADMA.LCDIF.D20, LSIO.GPIO0.IO27 */ +#define SC_P_SAI0_TXFS 85 /* ADMA.SAI0.TXFS, ADMA.SPI2.CS1, ADMA.SPI1.SCK, LSIO.GPIO0.IO28 */ +#define SC_P_SAI1_RXD 86 /* ADMA.SAI1.RXD, ADMA.SAI0.RXFS, ADMA.SPI1.CS1, ADMA.LCDIF.D21, LSIO.GPIO0.IO29 */ +#define SC_P_SAI1_RXC 87 /* ADMA.SAI1.RXC, ADMA.SAI1.TXC, ADMA.LCDIF.D22, LSIO.GPIO0.IO30 */ +#define SC_P_SAI1_RXFS 88 /* ADMA.SAI1.RXFS, ADMA.SAI1.TXFS, ADMA.LCDIF.D23, LSIO.GPIO0.IO31 */ +#define SC_P_SPI2_CS0 89 /* ADMA.SPI2.CS0, LSIO.GPIO1.IO00 */ +#define SC_P_SPI2_SDO 90 /* ADMA.SPI2.SDO, LSIO.GPIO1.IO01 */ +#define SC_P_SPI2_SDI 91 /* ADMA.SPI2.SDI, LSIO.GPIO1.IO02 */ +#define SC_P_SPI2_SCK 92 /* ADMA.SPI2.SCK, LSIO.GPIO1.IO03 */ +#define SC_P_SPI0_SCK 93 /* ADMA.SPI0.SCK, ADMA.SAI0.TXC, M40.I2C0.SCL, M40.GPIO0.IO00, LSIO.GPIO1.IO04 */ +#define SC_P_SPI0_SDI 94 /* ADMA.SPI0.SDI, ADMA.SAI0.TXD, M40.TPM0.CH0, M40.GPIO0.IO02, LSIO.GPIO1.IO05 */ +#define SC_P_SPI0_SDO 95 /* ADMA.SPI0.SDO, ADMA.SAI0.TXFS, M40.I2C0.SDA, M40.GPIO0.IO01, LSIO.GPIO1.IO06 */ +#define SC_P_SPI0_CS1 96 /* ADMA.SPI0.CS1, ADMA.SAI0.RXC, ADMA.SAI1.TXD, ADMA.LCD_PWM0.OUT, LSIO.GPIO1.IO07 */ +#define SC_P_SPI0_CS0 97 /* ADMA.SPI0.CS0, ADMA.SAI0.RXD, M40.TPM0.CH1, M40.GPIO0.IO03, LSIO.GPIO1.IO08 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHT 98 /* */ +#define SC_P_ADC_IN1 99 /* ADMA.ADC.IN1, M40.I2C0.SDA, M40.GPIO0.IO01, LSIO.GPIO1.IO09 */ +#define SC_P_ADC_IN0 100 /* ADMA.ADC.IN0, M40.I2C0.SCL, M40.GPIO0.IO00, LSIO.GPIO1.IO10 */ +#define SC_P_ADC_IN3 101 /* ADMA.ADC.IN3, M40.UART0.TX, M40.GPIO0.IO03, ADMA.ACM.MCLK_OUT0, LSIO.GPIO1.IO11 */ +#define SC_P_ADC_IN2 102 /* ADMA.ADC.IN2, M40.UART0.RX, M40.GPIO0.IO02, ADMA.ACM.MCLK_IN0, LSIO.GPIO1.IO12 */ +#define SC_P_ADC_IN5 103 /* ADMA.ADC.IN5, M40.TPM0.CH1, M40.GPIO0.IO05, LSIO.GPIO1.IO13 */ +#define SC_P_ADC_IN4 104 /* ADMA.ADC.IN4, M40.TPM0.CH0, M40.GPIO0.IO04, LSIO.GPIO1.IO14 */ +#define SC_P_FLEXCAN0_RX 105 /* ADMA.FLEXCAN0.RX, ADMA.SAI2.RXC, ADMA.UART0.RTS_B, ADMA.SAI1.TXC, LSIO.GPIO1.IO15 */ +#define SC_P_FLEXCAN0_TX 106 /* ADMA.FLEXCAN0.TX, ADMA.SAI2.RXD, ADMA.UART0.CTS_B, ADMA.SAI1.TXFS, LSIO.GPIO1.IO16 */ +#define SC_P_FLEXCAN1_RX 107 /* ADMA.FLEXCAN1.RX, ADMA.SAI2.RXFS, ADMA.FTM.CH2, ADMA.SAI1.TXD, LSIO.GPIO1.IO17 */ +#define SC_P_FLEXCAN1_TX 108 /* ADMA.FLEXCAN1.TX, ADMA.SAI3.RXC, ADMA.DMA0.REQ_IN0, ADMA.SAI1.RXD, LSIO.GPIO1.IO18 */ +#define SC_P_FLEXCAN2_RX 109 /* ADMA.FLEXCAN2.RX, ADMA.SAI3.RXD, ADMA.UART3.RX, ADMA.SAI1.RXFS, LSIO.GPIO1.IO19 */ +#define SC_P_FLEXCAN2_TX 110 /* ADMA.FLEXCAN2.TX, ADMA.SAI3.RXFS, ADMA.UART3.TX, ADMA.SAI1.RXC, LSIO.GPIO1.IO20 */ +#define SC_P_UART0_RX 111 /* ADMA.UART0.RX, ADMA.MQS.R, ADMA.FLEXCAN0.RX, SCU.UART0.RX, LSIO.GPIO1.IO21 */ +#define SC_P_UART0_TX 112 /* ADMA.UART0.TX, ADMA.MQS.L, ADMA.FLEXCAN0.TX, SCU.UART0.TX, LSIO.GPIO1.IO22 */ +#define SC_P_UART2_TX 113 /* ADMA.UART2.TX, ADMA.FTM.CH1, ADMA.FLEXCAN1.TX, LSIO.GPIO1.IO23 */ +#define SC_P_UART2_RX 114 /* ADMA.UART2.RX, ADMA.FTM.CH0, ADMA.FLEXCAN1.RX, LSIO.GPIO1.IO24 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOLH 115 /* */ +#define SC_P_MIPI_DSI0_I2C0_SCL 116 /* MIPI_DSI0.I2C0.SCL, MIPI_DSI1.GPIO0.IO02, LSIO.GPIO1.IO25 */ +#define SC_P_MIPI_DSI0_I2C0_SDA 117 /* MIPI_DSI0.I2C0.SDA, MIPI_DSI1.GPIO0.IO03, LSIO.GPIO1.IO26 */ +#define SC_P_MIPI_DSI0_GPIO0_00 118 /* MIPI_DSI0.GPIO0.IO00, ADMA.I2C1.SCL, MIPI_DSI0.PWM0.OUT, LSIO.GPIO1.IO27 */ +#define SC_P_MIPI_DSI0_GPIO0_01 119 /* MIPI_DSI0.GPIO0.IO01, ADMA.I2C1.SDA, LSIO.GPIO1.IO28 */ +#define SC_P_MIPI_DSI1_I2C0_SCL 120 /* MIPI_DSI1.I2C0.SCL, MIPI_DSI0.GPIO0.IO02, LSIO.GPIO1.IO29 */ +#define SC_P_MIPI_DSI1_I2C0_SDA 121 /* MIPI_DSI1.I2C0.SDA, MIPI_DSI0.GPIO0.IO03, LSIO.GPIO1.IO30 */ +#define SC_P_MIPI_DSI1_GPIO0_00 122 /* MIPI_DSI1.GPIO0.IO00, ADMA.I2C2.SCL, MIPI_DSI1.PWM0.OUT, LSIO.GPIO1.IO31 */ +#define SC_P_MIPI_DSI1_GPIO0_01 123 /* MIPI_DSI1.GPIO0.IO01, ADMA.I2C2.SDA, LSIO.GPIO2.IO00 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_MIPIDSIGPIO 124 /* */ +#define SC_P_JTAG_TRST_B 125 /* SCU.JTAG.TRST_B, SCU.WDOG0.WDOG_OUT */ +#define SC_P_PMIC_I2C_SCL 126 /* SCU.PMIC_I2C.SCL, SCU.GPIO0.IOXX_PMIC_A35_ON, LSIO.GPIO2.IO01 */ +#define SC_P_PMIC_I2C_SDA 127 /* SCU.PMIC_I2C.SDA, SCU.GPIO0.IOXX_PMIC_GPU_ON, LSIO.GPIO2.IO02 */ +#define SC_P_PMIC_INT_B 128 /* SCU.DSC.PMIC_INT_B */ +#define SC_P_SCU_GPIO0_00 129 /* SCU.GPIO0.IO00, SCU.UART0.RX, M40.UART0.RX, ADMA.UART3.RX, LSIO.GPIO2.IO03 */ +#define SC_P_SCU_GPIO0_01 130 /* SCU.GPIO0.IO01, SCU.UART0.TX, M40.UART0.TX, ADMA.UART3.TX, SCU.WDOG0.WDOG_OUT */ +#define SC_P_SCU_PMIC_STANDBY 131 /* SCU.DSC.PMIC_STANDBY */ +#define SC_P_SCU_BOOT_MODE0 132 /* SCU.DSC.BOOT_MODE0 */ +#define SC_P_SCU_BOOT_MODE1 133 /* SCU.DSC.BOOT_MODE1 */ +#define SC_P_SCU_BOOT_MODE2 134 /* SCU.DSC.BOOT_MODE2, SCU.PMIC_I2C.SDA */ +#define SC_P_SCU_BOOT_MODE3 135 /* SCU.DSC.BOOT_MODE3, SCU.PMIC_I2C.SCL, SCU.DSC.RTC_CLOCK_OUTPUT_32K */ +#define SC_P_CSI_D00 136 /* CI_PI.D02, ADMA.SAI0.RXC */ +#define SC_P_CSI_D01 137 /* CI_PI.D03, ADMA.SAI0.RXD */ +#define SC_P_CSI_D02 138 /* CI_PI.D04, ADMA.SAI0.RXFS */ +#define SC_P_CSI_D03 139 /* CI_PI.D05, ADMA.SAI2.RXC */ +#define SC_P_CSI_D04 140 /* CI_PI.D06, ADMA.SAI2.RXD */ +#define SC_P_CSI_D05 141 /* CI_PI.D07, ADMA.SAI2.RXFS */ +#define SC_P_CSI_D06 142 /* CI_PI.D08, ADMA.SAI3.RXC */ +#define SC_P_CSI_D07 143 /* CI_PI.D09, ADMA.SAI3.RXD */ +#define SC_P_CSI_HSYNC 144 /* CI_PI.HSYNC, CI_PI.D00, ADMA.SAI3.RXFS */ +#define SC_P_CSI_VSYNC 145 /* CI_PI.VSYNC, CI_PI.D01 */ +#define SC_P_CSI_PCLK 146 /* CI_PI.PCLK, MIPI_CSI0.I2C0.SCL, ADMA.SPI1.SCK, LSIO.GPIO3.IO00 */ +#define SC_P_CSI_MCLK 147 /* CI_PI.MCLK, MIPI_CSI0.I2C0.SDA, ADMA.SPI1.SDO, LSIO.GPIO3.IO01 */ +#define SC_P_CSI_EN 148 /* CI_PI.EN, CI_PI.I2C.SCL, ADMA.I2C3.SCL, ADMA.SPI1.SDI, LSIO.GPIO3.IO02 */ +#define SC_P_CSI_RESET 149 /* CI_PI.RESET, CI_PI.I2C.SDA, ADMA.I2C3.SDA, ADMA.SPI1.CS0, LSIO.GPIO3.IO03 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHD 150 /* */ +#define SC_P_MIPI_CSI0_MCLK_OUT 151 /* MIPI_CSI0.ACM.MCLK_OUT, LSIO.GPIO3.IO04 */ +#define SC_P_MIPI_CSI0_I2C0_SCL 152 /* MIPI_CSI0.I2C0.SCL, MIPI_CSI0.GPIO0.IO02, LSIO.GPIO3.IO05 */ +#define SC_P_MIPI_CSI0_I2C0_SDA 153 /* MIPI_CSI0.I2C0.SDA, MIPI_CSI0.GPIO0.IO03, LSIO.GPIO3.IO06 */ +#define SC_P_MIPI_CSI0_GPIO0_01 154 /* MIPI_CSI0.GPIO0.IO01, ADMA.I2C0.SDA, LSIO.GPIO3.IO07 */ +#define SC_P_MIPI_CSI0_GPIO0_00 155 /* MIPI_CSI0.GPIO0.IO00, ADMA.I2C0.SCL, LSIO.GPIO3.IO08 */ +#define SC_P_QSPI0A_DATA0 156 /* LSIO.QSPI0A.DATA0, LSIO.GPIO3.IO09 */ +#define SC_P_QSPI0A_DATA1 157 /* LSIO.QSPI0A.DATA1, LSIO.GPIO3.IO10 */ +#define SC_P_QSPI0A_DATA2 158 /* LSIO.QSPI0A.DATA2, LSIO.GPIO3.IO11 */ +#define SC_P_QSPI0A_DATA3 159 /* LSIO.QSPI0A.DATA3, LSIO.GPIO3.IO12 */ +#define SC_P_QSPI0A_DQS 160 /* LSIO.QSPI0A.DQS, LSIO.GPIO3.IO13 */ +#define SC_P_QSPI0A_SS0_B 161 /* LSIO.QSPI0A.SS0_B, LSIO.GPIO3.IO14 */ +#define SC_P_QSPI0A_SS1_B 162 /* LSIO.QSPI0A.SS1_B, LSIO.GPIO3.IO15 */ +#define SC_P_QSPI0A_SCLK 163 /* LSIO.QSPI0A.SCLK, LSIO.GPIO3.IO16 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI0A 164 /* */ +#define SC_P_QSPI0B_SCLK 165 /* LSIO.QSPI0B.SCLK, LSIO.QSPI1A.SCLK, LSIO.KPP0.COL0, LSIO.GPIO3.IO17 */ +#define SC_P_QSPI0B_DATA0 166 /* LSIO.QSPI0B.DATA0, LSIO.QSPI1A.DATA0, LSIO.KPP0.COL1, LSIO.GPIO3.IO18 */ +#define SC_P_QSPI0B_DATA1 167 /* LSIO.QSPI0B.DATA1, LSIO.QSPI1A.DATA1, LSIO.KPP0.COL2, LSIO.GPIO3.IO19 */ +#define SC_P_QSPI0B_DATA2 168 /* LSIO.QSPI0B.DATA2, LSIO.QSPI1A.DATA2, LSIO.KPP0.COL3, LSIO.GPIO3.IO20 */ +#define SC_P_QSPI0B_DATA3 169 /* LSIO.QSPI0B.DATA3, LSIO.QSPI1A.DATA3, LSIO.KPP0.ROW0, LSIO.GPIO3.IO21 */ +#define SC_P_QSPI0B_DQS 170 /* LSIO.QSPI0B.DQS, LSIO.QSPI1A.DQS, LSIO.KPP0.ROW1, LSIO.GPIO3.IO22 */ +#define SC_P_QSPI0B_SS0_B 171 /* LSIO.QSPI0B.SS0_B, LSIO.QSPI1A.SS0_B, LSIO.KPP0.ROW2, LSIO.GPIO3.IO23 */ +#define SC_P_QSPI0B_SS1_B 172 /* LSIO.QSPI0B.SS1_B, LSIO.QSPI1A.SS1_B, LSIO.KPP0.ROW3, LSIO.GPIO3.IO24 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI0B 173 /* */ +/*@}*/ + +/*! + * @name Pad Mux Definitions + * format: name padid padmux + */ +/*@{*/ +#define SC_P_PCIE_CTRL0_PERST_B_HSIO_PCIE0_PERST_B SC_P_PCIE_CTRL0_PERST_B 0 +#define SC_P_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 SC_P_PCIE_CTRL0_PERST_B 4 +#define SC_P_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B SC_P_PCIE_CTRL0_CLKREQ_B 0 +#define SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 SC_P_PCIE_CTRL0_CLKREQ_B 4 +#define SC_P_PCIE_CTRL0_WAKE_B_HSIO_PCIE0_WAKE_B SC_P_PCIE_CTRL0_WAKE_B 0 +#define SC_P_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 SC_P_PCIE_CTRL0_WAKE_B 4 +#define SC_P_USB_SS3_TC0_ADMA_I2C1_SCL SC_P_USB_SS3_TC0 0 +#define SC_P_USB_SS3_TC0_CONN_USB_OTG1_PWR SC_P_USB_SS3_TC0 1 +#define SC_P_USB_SS3_TC0_CONN_USB_OTG2_PWR SC_P_USB_SS3_TC0 2 +#define SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 SC_P_USB_SS3_TC0 4 +#define SC_P_USB_SS3_TC1_ADMA_I2C1_SCL SC_P_USB_SS3_TC1 0 +#define SC_P_USB_SS3_TC1_CONN_USB_OTG2_PWR SC_P_USB_SS3_TC1 1 +#define SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 SC_P_USB_SS3_TC1 4 +#define SC_P_USB_SS3_TC2_ADMA_I2C1_SDA SC_P_USB_SS3_TC2 0 +#define SC_P_USB_SS3_TC2_CONN_USB_OTG1_OC SC_P_USB_SS3_TC2 1 +#define SC_P_USB_SS3_TC2_CONN_USB_OTG2_OC SC_P_USB_SS3_TC2 2 +#define SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 SC_P_USB_SS3_TC2 4 +#define SC_P_USB_SS3_TC3_ADMA_I2C1_SDA SC_P_USB_SS3_TC3 0 +#define SC_P_USB_SS3_TC3_CONN_USB_OTG2_OC SC_P_USB_SS3_TC3 1 +#define SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 SC_P_USB_SS3_TC3 4 +#define SC_P_EMMC0_CLK_CONN_EMMC0_CLK SC_P_EMMC0_CLK 0 +#define SC_P_EMMC0_CLK_CONN_NAND_READY_B SC_P_EMMC0_CLK 1 +#define SC_P_EMMC0_CLK_LSIO_GPIO4_IO07 SC_P_EMMC0_CLK 4 +#define SC_P_EMMC0_CMD_CONN_EMMC0_CMD SC_P_EMMC0_CMD 0 +#define SC_P_EMMC0_CMD_CONN_NAND_DQS SC_P_EMMC0_CMD 1 +#define SC_P_EMMC0_CMD_LSIO_GPIO4_IO08 SC_P_EMMC0_CMD 4 +#define SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 SC_P_EMMC0_DATA0 0 +#define SC_P_EMMC0_DATA0_CONN_NAND_DATA00 SC_P_EMMC0_DATA0 1 +#define SC_P_EMMC0_DATA0_LSIO_GPIO4_IO09 SC_P_EMMC0_DATA0 4 +#define SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 SC_P_EMMC0_DATA1 0 +#define SC_P_EMMC0_DATA1_CONN_NAND_DATA01 SC_P_EMMC0_DATA1 1 +#define SC_P_EMMC0_DATA1_LSIO_GPIO4_IO10 SC_P_EMMC0_DATA1 4 +#define SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 SC_P_EMMC0_DATA2 0 +#define SC_P_EMMC0_DATA2_CONN_NAND_DATA02 SC_P_EMMC0_DATA2 1 +#define SC_P_EMMC0_DATA2_LSIO_GPIO4_IO11 SC_P_EMMC0_DATA2 4 +#define SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 SC_P_EMMC0_DATA3 0 +#define SC_P_EMMC0_DATA3_CONN_NAND_DATA03 SC_P_EMMC0_DATA3 1 +#define SC_P_EMMC0_DATA3_LSIO_GPIO4_IO12 SC_P_EMMC0_DATA3 4 +#define SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 SC_P_EMMC0_DATA4 0 +#define SC_P_EMMC0_DATA4_CONN_NAND_DATA04 SC_P_EMMC0_DATA4 1 +#define SC_P_EMMC0_DATA4_CONN_EMMC0_WP SC_P_EMMC0_DATA4 3 +#define SC_P_EMMC0_DATA4_LSIO_GPIO4_IO13 SC_P_EMMC0_DATA4 4 +#define SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 SC_P_EMMC0_DATA5 0 +#define SC_P_EMMC0_DATA5_CONN_NAND_DATA05 SC_P_EMMC0_DATA5 1 +#define SC_P_EMMC0_DATA5_CONN_EMMC0_VSELECT SC_P_EMMC0_DATA5 3 +#define SC_P_EMMC0_DATA5_LSIO_GPIO4_IO14 SC_P_EMMC0_DATA5 4 +#define SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 SC_P_EMMC0_DATA6 0 +#define SC_P_EMMC0_DATA6_CONN_NAND_DATA06 SC_P_EMMC0_DATA6 1 +#define SC_P_EMMC0_DATA6_CONN_MLB_CLK SC_P_EMMC0_DATA6 3 +#define SC_P_EMMC0_DATA6_LSIO_GPIO4_IO15 SC_P_EMMC0_DATA6 4 +#define SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 SC_P_EMMC0_DATA7 0 +#define SC_P_EMMC0_DATA7_CONN_NAND_DATA07 SC_P_EMMC0_DATA7 1 +#define SC_P_EMMC0_DATA7_CONN_MLB_SIG SC_P_EMMC0_DATA7 3 +#define SC_P_EMMC0_DATA7_LSIO_GPIO4_IO16 SC_P_EMMC0_DATA7 4 +#define SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE SC_P_EMMC0_STROBE 0 +#define SC_P_EMMC0_STROBE_CONN_NAND_CLE SC_P_EMMC0_STROBE 1 +#define SC_P_EMMC0_STROBE_CONN_MLB_DATA SC_P_EMMC0_STROBE 3 +#define SC_P_EMMC0_STROBE_LSIO_GPIO4_IO17 SC_P_EMMC0_STROBE 4 +#define SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B SC_P_EMMC0_RESET_B 0 +#define SC_P_EMMC0_RESET_B_CONN_NAND_WP_B SC_P_EMMC0_RESET_B 1 +#define SC_P_EMMC0_RESET_B_LSIO_GPIO4_IO18 SC_P_EMMC0_RESET_B 4 +#define SC_P_USDHC1_RESET_B_CONN_USDHC1_RESET_B SC_P_USDHC1_RESET_B 0 +#define SC_P_USDHC1_RESET_B_CONN_NAND_RE_N SC_P_USDHC1_RESET_B 1 +#define SC_P_USDHC1_RESET_B_ADMA_SPI2_SCK SC_P_USDHC1_RESET_B 2 +#define SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19 SC_P_USDHC1_RESET_B 4 +#define SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT SC_P_USDHC1_VSELECT 0 +#define SC_P_USDHC1_VSELECT_CONN_NAND_RE_P SC_P_USDHC1_VSELECT 1 +#define SC_P_USDHC1_VSELECT_ADMA_SPI2_SDO SC_P_USDHC1_VSELECT 2 +#define SC_P_USDHC1_VSELECT_CONN_NAND_RE_B SC_P_USDHC1_VSELECT 3 +#define SC_P_USDHC1_VSELECT_LSIO_GPIO4_IO20 SC_P_USDHC1_VSELECT 4 +#define SC_P_USDHC1_WP_CONN_USDHC1_WP SC_P_USDHC1_WP 0 +#define SC_P_USDHC1_WP_CONN_NAND_DQS_N SC_P_USDHC1_WP 1 +#define SC_P_USDHC1_WP_ADMA_SPI2_SDI SC_P_USDHC1_WP 2 +#define SC_P_USDHC1_WP_LSIO_GPIO4_IO21 SC_P_USDHC1_WP 4 +#define SC_P_USDHC1_CD_B_CONN_USDHC1_CD_B SC_P_USDHC1_CD_B 0 +#define SC_P_USDHC1_CD_B_CONN_NAND_DQS_P SC_P_USDHC1_CD_B 1 +#define SC_P_USDHC1_CD_B_ADMA_SPI2_CS0 SC_P_USDHC1_CD_B 2 +#define SC_P_USDHC1_CD_B_CONN_NAND_DQS SC_P_USDHC1_CD_B 3 +#define SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 SC_P_USDHC1_CD_B 4 +#define SC_P_USDHC1_CLK_CONN_USDHC1_CLK SC_P_USDHC1_CLK 0 +#define SC_P_USDHC1_CLK_ADMA_UART3_RX SC_P_USDHC1_CLK 2 +#define SC_P_USDHC1_CLK_LSIO_GPIO4_IO23 SC_P_USDHC1_CLK 4 +#define SC_P_USDHC1_CMD_CONN_USDHC1_CMD SC_P_USDHC1_CMD 0 +#define SC_P_USDHC1_CMD_CONN_NAND_CE0_B SC_P_USDHC1_CMD 1 +#define SC_P_USDHC1_CMD_ADMA_MQS_R SC_P_USDHC1_CMD 2 +#define SC_P_USDHC1_CMD_LSIO_GPIO4_IO24 SC_P_USDHC1_CMD 4 +#define SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 SC_P_USDHC1_DATA0 0 +#define SC_P_USDHC1_DATA0_CONN_NAND_CE1_B SC_P_USDHC1_DATA0 1 +#define SC_P_USDHC1_DATA0_ADMA_MQS_L SC_P_USDHC1_DATA0 2 +#define SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25 SC_P_USDHC1_DATA0 4 +#define SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 SC_P_USDHC1_DATA1 0 +#define SC_P_USDHC1_DATA1_CONN_NAND_RE_B SC_P_USDHC1_DATA1 1 +#define SC_P_USDHC1_DATA1_ADMA_UART3_TX SC_P_USDHC1_DATA1 2 +#define SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26 SC_P_USDHC1_DATA1 4 +#define SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 SC_P_USDHC1_DATA2 0 +#define SC_P_USDHC1_DATA2_CONN_NAND_WE_B SC_P_USDHC1_DATA2 1 +#define SC_P_USDHC1_DATA2_ADMA_UART3_CTS_B SC_P_USDHC1_DATA2 2 +#define SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27 SC_P_USDHC1_DATA2 4 +#define SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 SC_P_USDHC1_DATA3 0 +#define SC_P_USDHC1_DATA3_CONN_NAND_ALE SC_P_USDHC1_DATA3 1 +#define SC_P_USDHC1_DATA3_ADMA_UART3_RTS_B SC_P_USDHC1_DATA3 2 +#define SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28 SC_P_USDHC1_DATA3 4 +#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC SC_P_ENET0_RGMII_TXC 0 +#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT SC_P_ENET0_RGMII_TXC 1 +#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_IN SC_P_ENET0_RGMII_TXC 2 +#define SC_P_ENET0_RGMII_TXC_CONN_NAND_CE1_B SC_P_ENET0_RGMII_TXC 3 +#define SC_P_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 SC_P_ENET0_RGMII_TXC 4 +#define SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL SC_P_ENET0_RGMII_TX_CTL 0 +#define SC_P_ENET0_RGMII_TX_CTL_CONN_USDHC1_RESET_B SC_P_ENET0_RGMII_TX_CTL 3 +#define SC_P_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 SC_P_ENET0_RGMII_TX_CTL 4 +#define SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 SC_P_ENET0_RGMII_TXD0 0 +#define SC_P_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT SC_P_ENET0_RGMII_TXD0 3 +#define SC_P_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 SC_P_ENET0_RGMII_TXD0 4 +#define SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 SC_P_ENET0_RGMII_TXD1 0 +#define SC_P_ENET0_RGMII_TXD1_CONN_USDHC1_WP SC_P_ENET0_RGMII_TXD1 3 +#define SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 SC_P_ENET0_RGMII_TXD1 4 +#define SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 SC_P_ENET0_RGMII_TXD2 0 +#define SC_P_ENET0_RGMII_TXD2_CONN_MLB_CLK SC_P_ENET0_RGMII_TXD2 1 +#define SC_P_ENET0_RGMII_TXD2_CONN_NAND_CE0_B SC_P_ENET0_RGMII_TXD2 2 +#define SC_P_ENET0_RGMII_TXD2_CONN_USDHC1_CD_B SC_P_ENET0_RGMII_TXD2 3 +#define SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 SC_P_ENET0_RGMII_TXD2 4 +#define SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 SC_P_ENET0_RGMII_TXD3 0 +#define SC_P_ENET0_RGMII_TXD3_CONN_MLB_SIG SC_P_ENET0_RGMII_TXD3 1 +#define SC_P_ENET0_RGMII_TXD3_CONN_NAND_RE_B SC_P_ENET0_RGMII_TXD3 2 +#define SC_P_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 SC_P_ENET0_RGMII_TXD3 4 +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0 0 +#define SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC SC_P_ENET0_RGMII_RXC 0 +#define SC_P_ENET0_RGMII_RXC_CONN_MLB_DATA SC_P_ENET0_RGMII_RXC 1 +#define SC_P_ENET0_RGMII_RXC_CONN_NAND_WE_B SC_P_ENET0_RGMII_RXC 2 +#define SC_P_ENET0_RGMII_RXC_CONN_USDHC1_CLK SC_P_ENET0_RGMII_RXC 3 +#define SC_P_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 SC_P_ENET0_RGMII_RXC 4 +#define SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL SC_P_ENET0_RGMII_RX_CTL 0 +#define SC_P_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD SC_P_ENET0_RGMII_RX_CTL 3 +#define SC_P_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 SC_P_ENET0_RGMII_RX_CTL 4 +#define SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 SC_P_ENET0_RGMII_RXD0 0 +#define SC_P_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 SC_P_ENET0_RGMII_RXD0 3 +#define SC_P_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 SC_P_ENET0_RGMII_RXD0 4 +#define SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 SC_P_ENET0_RGMII_RXD1 0 +#define SC_P_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 SC_P_ENET0_RGMII_RXD1 3 +#define SC_P_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 SC_P_ENET0_RGMII_RXD1 4 +#define SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 SC_P_ENET0_RGMII_RXD2 0 +#define SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER SC_P_ENET0_RGMII_RXD2 1 +#define SC_P_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 SC_P_ENET0_RGMII_RXD2 3 +#define SC_P_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 SC_P_ENET0_RGMII_RXD2 4 +#define SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 SC_P_ENET0_RGMII_RXD3 0 +#define SC_P_ENET0_RGMII_RXD3_CONN_NAND_ALE SC_P_ENET0_RGMII_RXD3 2 +#define SC_P_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 SC_P_ENET0_RGMII_RXD3 3 +#define SC_P_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 SC_P_ENET0_RGMII_RXD3 4 +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1 0 +#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M SC_P_ENET0_REFCLK_125M_25M 0 +#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_PPS SC_P_ENET0_REFCLK_125M_25M 1 +#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET1_PPS SC_P_ENET0_REFCLK_125M_25M 2 +#define SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 SC_P_ENET0_REFCLK_125M_25M 4 +#define SC_P_ENET0_MDIO_CONN_ENET0_MDIO SC_P_ENET0_MDIO 0 +#define SC_P_ENET0_MDIO_ADMA_I2C3_SDA SC_P_ENET0_MDIO 1 +#define SC_P_ENET0_MDIO_CONN_ENET1_MDIO SC_P_ENET0_MDIO 2 +#define SC_P_ENET0_MDIO_LSIO_GPIO5_IO10 SC_P_ENET0_MDIO 4 +#define SC_P_ENET0_MDC_CONN_ENET0_MDC SC_P_ENET0_MDC 0 +#define SC_P_ENET0_MDC_ADMA_I2C3_SCL SC_P_ENET0_MDC 1 +#define SC_P_ENET0_MDC_CONN_ENET1_MDC SC_P_ENET0_MDC 2 +#define SC_P_ENET0_MDC_LSIO_GPIO5_IO11 SC_P_ENET0_MDC 4 +#define SC_P_ESAI0_FSR_ADMA_ESAI0_FSR SC_P_ESAI0_FSR 0 +#define SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_OUT SC_P_ESAI0_FSR 1 +#define SC_P_ESAI0_FSR_ADMA_LCDIF_D00 SC_P_ESAI0_FSR 2 +#define SC_P_ESAI0_FSR_CONN_ENET1_RGMII_TXC SC_P_ESAI0_FSR 3 +#define SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_IN SC_P_ESAI0_FSR 4 +#define SC_P_ESAI0_FST_ADMA_ESAI0_FST SC_P_ESAI0_FST 0 +#define SC_P_ESAI0_FST_CONN_MLB_CLK SC_P_ESAI0_FST 1 +#define SC_P_ESAI0_FST_ADMA_LCDIF_D01 SC_P_ESAI0_FST 2 +#define SC_P_ESAI0_FST_CONN_ENET1_RGMII_TXD2 SC_P_ESAI0_FST 3 +#define SC_P_ESAI0_FST_LSIO_GPIO0_IO01 SC_P_ESAI0_FST 4 +#define SC_P_ESAI0_SCKR_ADMA_ESAI0_SCKR SC_P_ESAI0_SCKR 0 +#define SC_P_ESAI0_SCKR_ADMA_LCDIF_D02 SC_P_ESAI0_SCKR 2 +#define SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL SC_P_ESAI0_SCKR 3 +#define SC_P_ESAI0_SCKR_LSIO_GPIO0_IO02 SC_P_ESAI0_SCKR 4 +#define SC_P_ESAI0_SCKT_ADMA_ESAI0_SCKT SC_P_ESAI0_SCKT 0 +#define SC_P_ESAI0_SCKT_CONN_MLB_SIG SC_P_ESAI0_SCKT 1 +#define SC_P_ESAI0_SCKT_ADMA_LCDIF_D03 SC_P_ESAI0_SCKT 2 +#define SC_P_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 SC_P_ESAI0_SCKT 3 +#define SC_P_ESAI0_SCKT_LSIO_GPIO0_IO03 SC_P_ESAI0_SCKT 4 +#define SC_P_ESAI0_TX0_ADMA_ESAI0_TX0 SC_P_ESAI0_TX0 0 +#define SC_P_ESAI0_TX0_CONN_MLB_DATA SC_P_ESAI0_TX0 1 +#define SC_P_ESAI0_TX0_ADMA_LCDIF_D04 SC_P_ESAI0_TX0 2 +#define SC_P_ESAI0_TX0_CONN_ENET1_RGMII_RXC SC_P_ESAI0_TX0 3 +#define SC_P_ESAI0_TX0_LSIO_GPIO0_IO04 SC_P_ESAI0_TX0 4 +#define SC_P_ESAI0_TX1_ADMA_ESAI0_TX1 SC_P_ESAI0_TX1 0 +#define SC_P_ESAI0_TX1_ADMA_LCDIF_D05 SC_P_ESAI0_TX1 2 +#define SC_P_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 SC_P_ESAI0_TX1 3 +#define SC_P_ESAI0_TX1_LSIO_GPIO0_IO05 SC_P_ESAI0_TX1 4 +#define SC_P_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 SC_P_ESAI0_TX2_RX3 0 +#define SC_P_ESAI0_TX2_RX3_CONN_ENET1_RMII_RX_ER SC_P_ESAI0_TX2_RX3 1 +#define SC_P_ESAI0_TX2_RX3_ADMA_LCDIF_D06 SC_P_ESAI0_TX2_RX3 2 +#define SC_P_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 SC_P_ESAI0_TX2_RX3 3 +#define SC_P_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 SC_P_ESAI0_TX2_RX3 4 +#define SC_P_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 SC_P_ESAI0_TX3_RX2 0 +#define SC_P_ESAI0_TX3_RX2_ADMA_LCDIF_D07 SC_P_ESAI0_TX3_RX2 2 +#define SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 SC_P_ESAI0_TX3_RX2 3 +#define SC_P_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 SC_P_ESAI0_TX3_RX2 4 +#define SC_P_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 SC_P_ESAI0_TX4_RX1 0 +#define SC_P_ESAI0_TX4_RX1_ADMA_LCDIF_D08 SC_P_ESAI0_TX4_RX1 2 +#define SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 SC_P_ESAI0_TX4_RX1 3 +#define SC_P_ESAI0_TX4_RX1_LSIO_GPIO0_IO08 SC_P_ESAI0_TX4_RX1 4 +#define SC_P_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 SC_P_ESAI0_TX5_RX0 0 +#define SC_P_ESAI0_TX5_RX0_ADMA_LCDIF_D09 SC_P_ESAI0_TX5_RX0 2 +#define SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 SC_P_ESAI0_TX5_RX0 3 +#define SC_P_ESAI0_TX5_RX0_LSIO_GPIO0_IO09 SC_P_ESAI0_TX5_RX0 4 +#define SC_P_SPDIF0_RX_ADMA_SPDIF0_RX SC_P_SPDIF0_RX 0 +#define SC_P_SPDIF0_RX_ADMA_MQS_R SC_P_SPDIF0_RX 1 +#define SC_P_SPDIF0_RX_ADMA_LCDIF_D10 SC_P_SPDIF0_RX 2 +#define SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 SC_P_SPDIF0_RX 3 +#define SC_P_SPDIF0_RX_LSIO_GPIO0_IO10 SC_P_SPDIF0_RX 4 +#define SC_P_SPDIF0_TX_ADMA_SPDIF0_TX SC_P_SPDIF0_TX 0 +#define SC_P_SPDIF0_TX_ADMA_MQS_L SC_P_SPDIF0_TX 1 +#define SC_P_SPDIF0_TX_ADMA_LCDIF_D11 SC_P_SPDIF0_TX 2 +#define SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL SC_P_SPDIF0_TX 3 +#define SC_P_SPDIF0_TX_LSIO_GPIO0_IO11 SC_P_SPDIF0_TX 4 +#define SC_P_SPDIF0_EXT_CLK_ADMA_SPDIF0_EXT_CLK SC_P_SPDIF0_EXT_CLK 0 +#define SC_P_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 SC_P_SPDIF0_EXT_CLK 2 +#define SC_P_SPDIF0_EXT_CLK_CONN_ENET1_REFCLK_125M_25M SC_P_SPDIF0_EXT_CLK 3 +#define SC_P_SPDIF0_EXT_CLK_LSIO_GPIO0_IO12 SC_P_SPDIF0_EXT_CLK 4 +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB 0 +#define SC_P_SPI3_SCK_ADMA_SPI3_SCK SC_P_SPI3_SCK 0 +#define SC_P_SPI3_SCK_ADMA_LCDIF_D13 SC_P_SPI3_SCK 2 +#define SC_P_SPI3_SCK_LSIO_GPIO0_IO13 SC_P_SPI3_SCK 4 +#define SC_P_SPI3_SDO_ADMA_SPI3_SDO SC_P_SPI3_SDO 0 +#define SC_P_SPI3_SDO_ADMA_LCDIF_D14 SC_P_SPI3_SDO 2 +#define SC_P_SPI3_SDO_LSIO_GPIO0_IO14 SC_P_SPI3_SDO 4 +#define SC_P_SPI3_SDI_ADMA_SPI3_SDI SC_P_SPI3_SDI 0 +#define SC_P_SPI3_SDI_ADMA_LCDIF_D15 SC_P_SPI3_SDI 2 +#define SC_P_SPI3_SDI_LSIO_GPIO0_IO15 SC_P_SPI3_SDI 4 +#define SC_P_SPI3_CS0_ADMA_SPI3_CS0 SC_P_SPI3_CS0 0 +#define SC_P_SPI3_CS0_ADMA_ACM_MCLK_OUT1 SC_P_SPI3_CS0 1 +#define SC_P_SPI3_CS0_ADMA_LCDIF_HSYNC SC_P_SPI3_CS0 2 +#define SC_P_SPI3_CS0_LSIO_GPIO0_IO16 SC_P_SPI3_CS0 4 +#define SC_P_SPI3_CS1_ADMA_SPI3_CS1 SC_P_SPI3_CS1 0 +#define SC_P_SPI3_CS1_ADMA_I2C3_SCL SC_P_SPI3_CS1 1 +#define SC_P_SPI3_CS1_ADMA_LCDIF_RESET SC_P_SPI3_CS1 2 +#define SC_P_SPI3_CS1_ADMA_SPI2_CS0 SC_P_SPI3_CS1 3 +#define SC_P_SPI3_CS1_ADMA_LCDIF_D16 SC_P_SPI3_CS1 4 +#define SC_P_MCLK_IN1_ADMA_ACM_MCLK_IN1 SC_P_MCLK_IN1 0 +#define SC_P_MCLK_IN1_ADMA_I2C3_SDA SC_P_MCLK_IN1 1 +#define SC_P_MCLK_IN1_ADMA_LCDIF_EN SC_P_MCLK_IN1 2 +#define SC_P_MCLK_IN1_ADMA_SPI2_SCK SC_P_MCLK_IN1 3 +#define SC_P_MCLK_IN1_ADMA_LCDIF_D17 SC_P_MCLK_IN1 4 +#define SC_P_MCLK_IN0_ADMA_ACM_MCLK_IN0 SC_P_MCLK_IN0 0 +#define SC_P_MCLK_IN0_ADMA_ESAI0_RX_HF_CLK SC_P_MCLK_IN0 1 +#define SC_P_MCLK_IN0_ADMA_LCDIF_VSYNC SC_P_MCLK_IN0 2 +#define SC_P_MCLK_IN0_ADMA_SPI2_SDI SC_P_MCLK_IN0 3 +#define SC_P_MCLK_IN0_LSIO_GPIO0_IO19 SC_P_MCLK_IN0 4 +#define SC_P_MCLK_OUT0_ADMA_ACM_MCLK_OUT0 SC_P_MCLK_OUT0 0 +#define SC_P_MCLK_OUT0_ADMA_ESAI0_TX_HF_CLK SC_P_MCLK_OUT0 1 +#define SC_P_MCLK_OUT0_ADMA_LCDIF_CLK SC_P_MCLK_OUT0 2 +#define SC_P_MCLK_OUT0_ADMA_SPI2_SDO SC_P_MCLK_OUT0 3 +#define SC_P_MCLK_OUT0_LSIO_GPIO0_IO20 SC_P_MCLK_OUT0 4 +#define SC_P_UART1_TX_ADMA_UART1_TX SC_P_UART1_TX 0 +#define SC_P_UART1_TX_LSIO_PWM0_OUT SC_P_UART1_TX 1 +#define SC_P_UART1_TX_LSIO_GPT0_CAPTURE SC_P_UART1_TX 2 +#define SC_P_UART1_TX_LSIO_GPIO0_IO21 SC_P_UART1_TX 4 +#define SC_P_UART1_RX_ADMA_UART1_RX SC_P_UART1_RX 0 +#define SC_P_UART1_RX_LSIO_PWM1_OUT SC_P_UART1_RX 1 +#define SC_P_UART1_RX_LSIO_GPT0_COMPARE SC_P_UART1_RX 2 +#define SC_P_UART1_RX_LSIO_GPT1_CLK SC_P_UART1_RX 3 +#define SC_P_UART1_RX_LSIO_GPIO0_IO22 SC_P_UART1_RX 4 +#define SC_P_UART1_RTS_B_ADMA_UART1_RTS_B SC_P_UART1_RTS_B 0 +#define SC_P_UART1_RTS_B_LSIO_PWM2_OUT SC_P_UART1_RTS_B 1 +#define SC_P_UART1_RTS_B_ADMA_LCDIF_D16 SC_P_UART1_RTS_B 2 +#define SC_P_UART1_RTS_B_LSIO_GPT1_CAPTURE SC_P_UART1_RTS_B 3 +#define SC_P_UART1_RTS_B_LSIO_GPT0_CLK SC_P_UART1_RTS_B 4 +#define SC_P_UART1_CTS_B_ADMA_UART1_CTS_B SC_P_UART1_CTS_B 0 +#define SC_P_UART1_CTS_B_LSIO_PWM3_OUT SC_P_UART1_CTS_B 1 +#define SC_P_UART1_CTS_B_ADMA_LCDIF_D17 SC_P_UART1_CTS_B 2 +#define SC_P_UART1_CTS_B_LSIO_GPT1_COMPARE SC_P_UART1_CTS_B 3 +#define SC_P_UART1_CTS_B_LSIO_GPIO0_IO24 SC_P_UART1_CTS_B 4 +#define SC_P_SAI0_TXD_ADMA_SAI0_TXD SC_P_SAI0_TXD 0 +#define SC_P_SAI0_TXD_ADMA_SAI1_RXC SC_P_SAI0_TXD 1 +#define SC_P_SAI0_TXD_ADMA_SPI1_SDO SC_P_SAI0_TXD 2 +#define SC_P_SAI0_TXD_ADMA_LCDIF_D18 SC_P_SAI0_TXD 3 +#define SC_P_SAI0_TXD_LSIO_GPIO0_IO25 SC_P_SAI0_TXD 4 +#define SC_P_SAI0_TXC_ADMA_SAI0_TXC SC_P_SAI0_TXC 0 +#define SC_P_SAI0_TXC_ADMA_SAI1_TXD SC_P_SAI0_TXC 1 +#define SC_P_SAI0_TXC_ADMA_SPI1_SDI SC_P_SAI0_TXC 2 +#define SC_P_SAI0_TXC_ADMA_LCDIF_D19 SC_P_SAI0_TXC 3 +#define SC_P_SAI0_TXC_LSIO_GPIO0_IO26 SC_P_SAI0_TXC 4 +#define SC_P_SAI0_RXD_ADMA_SAI0_RXD SC_P_SAI0_RXD 0 +#define SC_P_SAI0_RXD_ADMA_SAI1_RXFS SC_P_SAI0_RXD 1 +#define SC_P_SAI0_RXD_ADMA_SPI1_CS0 SC_P_SAI0_RXD 2 +#define SC_P_SAI0_RXD_ADMA_LCDIF_D20 SC_P_SAI0_RXD 3 +#define SC_P_SAI0_RXD_LSIO_GPIO0_IO27 SC_P_SAI0_RXD 4 +#define SC_P_SAI0_TXFS_ADMA_SAI0_TXFS SC_P_SAI0_TXFS 0 +#define SC_P_SAI0_TXFS_ADMA_SPI2_CS1 SC_P_SAI0_TXFS 1 +#define SC_P_SAI0_TXFS_ADMA_SPI1_SCK SC_P_SAI0_TXFS 2 +#define SC_P_SAI0_TXFS_LSIO_GPIO0_IO28 SC_P_SAI0_TXFS 4 +#define SC_P_SAI1_RXD_ADMA_SAI1_RXD SC_P_SAI1_RXD 0 +#define SC_P_SAI1_RXD_ADMA_SAI0_RXFS SC_P_SAI1_RXD 1 +#define SC_P_SAI1_RXD_ADMA_SPI1_CS1 SC_P_SAI1_RXD 2 +#define SC_P_SAI1_RXD_ADMA_LCDIF_D21 SC_P_SAI1_RXD 3 +#define SC_P_SAI1_RXD_LSIO_GPIO0_IO29 SC_P_SAI1_RXD 4 +#define SC_P_SAI1_RXC_ADMA_SAI1_RXC SC_P_SAI1_RXC 0 +#define SC_P_SAI1_RXC_ADMA_SAI1_TXC SC_P_SAI1_RXC 1 +#define SC_P_SAI1_RXC_ADMA_LCDIF_D22 SC_P_SAI1_RXC 3 +#define SC_P_SAI1_RXC_LSIO_GPIO0_IO30 SC_P_SAI1_RXC 4 +#define SC_P_SAI1_RXFS_ADMA_SAI1_RXFS SC_P_SAI1_RXFS 0 +#define SC_P_SAI1_RXFS_ADMA_SAI1_TXFS SC_P_SAI1_RXFS 1 +#define SC_P_SAI1_RXFS_ADMA_LCDIF_D23 SC_P_SAI1_RXFS 3 +#define SC_P_SAI1_RXFS_LSIO_GPIO0_IO31 SC_P_SAI1_RXFS 4 +#define SC_P_SPI2_CS0_ADMA_SPI2_CS0 SC_P_SPI2_CS0 0 +#define SC_P_SPI2_CS0_LSIO_GPIO1_IO00 SC_P_SPI2_CS0 4 +#define SC_P_SPI2_SDO_ADMA_SPI2_SDO SC_P_SPI2_SDO 0 +#define SC_P_SPI2_SDO_LSIO_GPIO1_IO01 SC_P_SPI2_SDO 4 +#define SC_P_SPI2_SDI_ADMA_SPI2_SDI SC_P_SPI2_SDI 0 +#define SC_P_SPI2_SDI_LSIO_GPIO1_IO02 SC_P_SPI2_SDI 4 +#define SC_P_SPI2_SCK_ADMA_SPI2_SCK SC_P_SPI2_SCK 0 +#define SC_P_SPI2_SCK_LSIO_GPIO1_IO03 SC_P_SPI2_SCK 4 +#define SC_P_SPI0_SCK_ADMA_SPI0_SCK SC_P_SPI0_SCK 0 +#define SC_P_SPI0_SCK_ADMA_SAI0_TXC SC_P_SPI0_SCK 1 +#define SC_P_SPI0_SCK_M40_I2C0_SCL SC_P_SPI0_SCK 2 +#define SC_P_SPI0_SCK_M40_GPIO0_IO00 SC_P_SPI0_SCK 3 +#define SC_P_SPI0_SCK_LSIO_GPIO1_IO04 SC_P_SPI0_SCK 4 +#define SC_P_SPI0_SDI_ADMA_SPI0_SDI SC_P_SPI0_SDI 0 +#define SC_P_SPI0_SDI_ADMA_SAI0_TXD SC_P_SPI0_SDI 1 +#define SC_P_SPI0_SDI_M40_TPM0_CH0 SC_P_SPI0_SDI 2 +#define SC_P_SPI0_SDI_M40_GPIO0_IO02 SC_P_SPI0_SDI 3 +#define SC_P_SPI0_SDI_LSIO_GPIO1_IO05 SC_P_SPI0_SDI 4 +#define SC_P_SPI0_SDO_ADMA_SPI0_SDO SC_P_SPI0_SDO 0 +#define SC_P_SPI0_SDO_ADMA_SAI0_TXFS SC_P_SPI0_SDO 1 +#define SC_P_SPI0_SDO_M40_I2C0_SDA SC_P_SPI0_SDO 2 +#define SC_P_SPI0_SDO_M40_GPIO0_IO01 SC_P_SPI0_SDO 3 +#define SC_P_SPI0_SDO_LSIO_GPIO1_IO06 SC_P_SPI0_SDO 4 +#define SC_P_SPI0_CS1_ADMA_SPI0_CS1 SC_P_SPI0_CS1 0 +#define SC_P_SPI0_CS1_ADMA_SAI0_RXC SC_P_SPI0_CS1 1 +#define SC_P_SPI0_CS1_ADMA_SAI1_TXD SC_P_SPI0_CS1 2 +#define SC_P_SPI0_CS1_ADMA_LCD_PWM0_OUT SC_P_SPI0_CS1 3 +#define SC_P_SPI0_CS1_LSIO_GPIO1_IO07 SC_P_SPI0_CS1 4 +#define SC_P_SPI0_CS0_ADMA_SPI0_CS0 SC_P_SPI0_CS0 0 +#define SC_P_SPI0_CS0_ADMA_SAI0_RXD SC_P_SPI0_CS0 1 +#define SC_P_SPI0_CS0_M40_TPM0_CH1 SC_P_SPI0_CS0 2 +#define SC_P_SPI0_CS0_M40_GPIO0_IO03 SC_P_SPI0_CS0 3 +#define SC_P_SPI0_CS0_LSIO_GPIO1_IO08 SC_P_SPI0_CS0 4 +#define SC_P_ADC_IN1_ADMA_ADC_IN1 SC_P_ADC_IN1 0 +#define SC_P_ADC_IN1_M40_I2C0_SDA SC_P_ADC_IN1 1 +#define SC_P_ADC_IN1_M40_GPIO0_IO01 SC_P_ADC_IN1 2 +#define SC_P_ADC_IN1_LSIO_GPIO1_IO09 SC_P_ADC_IN1 4 +#define SC_P_ADC_IN0_ADMA_ADC_IN0 SC_P_ADC_IN0 0 +#define SC_P_ADC_IN0_M40_I2C0_SCL SC_P_ADC_IN0 1 +#define SC_P_ADC_IN0_M40_GPIO0_IO00 SC_P_ADC_IN0 2 +#define SC_P_ADC_IN0_LSIO_GPIO1_IO10 SC_P_ADC_IN0 4 +#define SC_P_ADC_IN3_ADMA_ADC_IN3 SC_P_ADC_IN3 0 +#define SC_P_ADC_IN3_M40_UART0_TX SC_P_ADC_IN3 1 +#define SC_P_ADC_IN3_M40_GPIO0_IO03 SC_P_ADC_IN3 2 +#define SC_P_ADC_IN3_ADMA_ACM_MCLK_OUT0 SC_P_ADC_IN3 3 +#define SC_P_ADC_IN3_LSIO_GPIO1_IO11 SC_P_ADC_IN3 4 +#define SC_P_ADC_IN2_ADMA_ADC_IN2 SC_P_ADC_IN2 0 +#define SC_P_ADC_IN2_M40_UART0_RX SC_P_ADC_IN2 1 +#define SC_P_ADC_IN2_M40_GPIO0_IO02 SC_P_ADC_IN2 2 +#define SC_P_ADC_IN2_ADMA_ACM_MCLK_IN0 SC_P_ADC_IN2 3 +#define SC_P_ADC_IN2_LSIO_GPIO1_IO12 SC_P_ADC_IN2 4 +#define SC_P_ADC_IN5_ADMA_ADC_IN5 SC_P_ADC_IN5 0 +#define SC_P_ADC_IN5_M40_TPM0_CH1 SC_P_ADC_IN5 1 +#define SC_P_ADC_IN5_M40_GPIO0_IO05 SC_P_ADC_IN5 2 +#define SC_P_ADC_IN5_LSIO_GPIO1_IO13 SC_P_ADC_IN5 4 +#define SC_P_ADC_IN4_ADMA_ADC_IN4 SC_P_ADC_IN4 0 +#define SC_P_ADC_IN4_M40_TPM0_CH0 SC_P_ADC_IN4 1 +#define SC_P_ADC_IN4_M40_GPIO0_IO04 SC_P_ADC_IN4 2 +#define SC_P_ADC_IN4_LSIO_GPIO1_IO14 SC_P_ADC_IN4 4 +#define SC_P_FLEXCAN0_RX_ADMA_FLEXCAN0_RX SC_P_FLEXCAN0_RX 0 +#define SC_P_FLEXCAN0_RX_ADMA_SAI2_RXC SC_P_FLEXCAN0_RX 1 +#define SC_P_FLEXCAN0_RX_ADMA_UART0_RTS_B SC_P_FLEXCAN0_RX 2 +#define SC_P_FLEXCAN0_RX_ADMA_SAI1_TXC SC_P_FLEXCAN0_RX 3 +#define SC_P_FLEXCAN0_RX_LSIO_GPIO1_IO15 SC_P_FLEXCAN0_RX 4 +#define SC_P_FLEXCAN0_TX_ADMA_FLEXCAN0_TX SC_P_FLEXCAN0_TX 0 +#define SC_P_FLEXCAN0_TX_ADMA_SAI2_RXD SC_P_FLEXCAN0_TX 1 +#define SC_P_FLEXCAN0_TX_ADMA_UART0_CTS_B SC_P_FLEXCAN0_TX 2 +#define SC_P_FLEXCAN0_TX_ADMA_SAI1_TXFS SC_P_FLEXCAN0_TX 3 +#define SC_P_FLEXCAN0_TX_LSIO_GPIO1_IO16 SC_P_FLEXCAN0_TX 4 +#define SC_P_FLEXCAN1_RX_ADMA_FLEXCAN1_RX SC_P_FLEXCAN1_RX 0 +#define SC_P_FLEXCAN1_RX_ADMA_SAI2_RXFS SC_P_FLEXCAN1_RX 1 +#define SC_P_FLEXCAN1_RX_ADMA_FTM_CH2 SC_P_FLEXCAN1_RX 2 +#define SC_P_FLEXCAN1_RX_ADMA_SAI1_TXD SC_P_FLEXCAN1_RX 3 +#define SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17 SC_P_FLEXCAN1_RX 4 +#define SC_P_FLEXCAN1_TX_ADMA_FLEXCAN1_TX SC_P_FLEXCAN1_TX 0 +#define SC_P_FLEXCAN1_TX_ADMA_SAI3_RXC SC_P_FLEXCAN1_TX 1 +#define SC_P_FLEXCAN1_TX_ADMA_DMA0_REQ_IN0 SC_P_FLEXCAN1_TX 2 +#define SC_P_FLEXCAN1_TX_ADMA_SAI1_RXD SC_P_FLEXCAN1_TX 3 +#define SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18 SC_P_FLEXCAN1_TX 4 +#define SC_P_FLEXCAN2_RX_ADMA_FLEXCAN2_RX SC_P_FLEXCAN2_RX 0 +#define SC_P_FLEXCAN2_RX_ADMA_SAI3_RXD SC_P_FLEXCAN2_RX 1 +#define SC_P_FLEXCAN2_RX_ADMA_UART3_RX SC_P_FLEXCAN2_RX 2 +#define SC_P_FLEXCAN2_RX_ADMA_SAI1_RXFS SC_P_FLEXCAN2_RX 3 +#define SC_P_FLEXCAN2_RX_LSIO_GPIO1_IO19 SC_P_FLEXCAN2_RX 4 +#define SC_P_FLEXCAN2_TX_ADMA_FLEXCAN2_TX SC_P_FLEXCAN2_TX 0 +#define SC_P_FLEXCAN2_TX_ADMA_SAI3_RXFS SC_P_FLEXCAN2_TX 1 +#define SC_P_FLEXCAN2_TX_ADMA_UART3_TX SC_P_FLEXCAN2_TX 2 +#define SC_P_FLEXCAN2_TX_ADMA_SAI1_RXC SC_P_FLEXCAN2_TX 3 +#define SC_P_FLEXCAN2_TX_LSIO_GPIO1_IO20 SC_P_FLEXCAN2_TX 4 +#define SC_P_UART0_RX_ADMA_UART0_RX SC_P_UART0_RX 0 +#define SC_P_UART0_RX_ADMA_MQS_R SC_P_UART0_RX 1 +#define SC_P_UART0_RX_ADMA_FLEXCAN0_RX SC_P_UART0_RX 2 +#define SC_P_UART0_RX_SCU_UART0_RX SC_P_UART0_RX 3 +#define SC_P_UART0_RX_LSIO_GPIO1_IO21 SC_P_UART0_RX 4 +#define SC_P_UART0_TX_ADMA_UART0_TX SC_P_UART0_TX 0 +#define SC_P_UART0_TX_ADMA_MQS_L SC_P_UART0_TX 1 +#define SC_P_UART0_TX_ADMA_FLEXCAN0_TX SC_P_UART0_TX 2 +#define SC_P_UART0_TX_SCU_UART0_TX SC_P_UART0_TX 3 +#define SC_P_UART0_TX_LSIO_GPIO1_IO22 SC_P_UART0_TX 4 +#define SC_P_UART2_TX_ADMA_UART2_TX SC_P_UART2_TX 0 +#define SC_P_UART2_TX_ADMA_FTM_CH1 SC_P_UART2_TX 1 +#define SC_P_UART2_TX_ADMA_FLEXCAN1_TX SC_P_UART2_TX 2 +#define SC_P_UART2_TX_LSIO_GPIO1_IO23 SC_P_UART2_TX 4 +#define SC_P_UART2_RX_ADMA_UART2_RX SC_P_UART2_RX 0 +#define SC_P_UART2_RX_ADMA_FTM_CH0 SC_P_UART2_RX 1 +#define SC_P_UART2_RX_ADMA_FLEXCAN1_RX SC_P_UART2_RX 2 +#define SC_P_UART2_RX_LSIO_GPIO1_IO24 SC_P_UART2_RX 4 +#define SC_P_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL SC_P_MIPI_DSI0_I2C0_SCL 0 +#define SC_P_MIPI_DSI0_I2C0_SCL_MIPI_DSI1_GPIO0_IO02 SC_P_MIPI_DSI0_I2C0_SCL 1 +#define SC_P_MIPI_DSI0_I2C0_SCL_LSIO_GPIO1_IO25 SC_P_MIPI_DSI0_I2C0_SCL 4 +#define SC_P_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA SC_P_MIPI_DSI0_I2C0_SDA 0 +#define SC_P_MIPI_DSI0_I2C0_SDA_MIPI_DSI1_GPIO0_IO03 SC_P_MIPI_DSI0_I2C0_SDA 1 +#define SC_P_MIPI_DSI0_I2C0_SDA_LSIO_GPIO1_IO26 SC_P_MIPI_DSI0_I2C0_SDA 4 +#define SC_P_MIPI_DSI0_GPIO0_00_MIPI_DSI0_GPIO0_IO00 SC_P_MIPI_DSI0_GPIO0_00 0 +#define SC_P_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL SC_P_MIPI_DSI0_GPIO0_00 1 +#define SC_P_MIPI_DSI0_GPIO0_00_MIPI_DSI0_PWM0_OUT SC_P_MIPI_DSI0_GPIO0_00 2 +#define SC_P_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27 SC_P_MIPI_DSI0_GPIO0_00 4 +#define SC_P_MIPI_DSI0_GPIO0_01_MIPI_DSI0_GPIO0_IO01 SC_P_MIPI_DSI0_GPIO0_01 0 +#define SC_P_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA SC_P_MIPI_DSI0_GPIO0_01 1 +#define SC_P_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28 SC_P_MIPI_DSI0_GPIO0_01 4 +#define SC_P_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL SC_P_MIPI_DSI1_I2C0_SCL 0 +#define SC_P_MIPI_DSI1_I2C0_SCL_MIPI_DSI0_GPIO0_IO02 SC_P_MIPI_DSI1_I2C0_SCL 1 +#define SC_P_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO29 SC_P_MIPI_DSI1_I2C0_SCL 4 +#define SC_P_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA SC_P_MIPI_DSI1_I2C0_SDA 0 +#define SC_P_MIPI_DSI1_I2C0_SDA_MIPI_DSI0_GPIO0_IO03 SC_P_MIPI_DSI1_I2C0_SDA 1 +#define SC_P_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30 SC_P_MIPI_DSI1_I2C0_SDA 4 +#define SC_P_MIPI_DSI1_GPIO0_00_MIPI_DSI1_GPIO0_IO00 SC_P_MIPI_DSI1_GPIO0_00 0 +#define SC_P_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL SC_P_MIPI_DSI1_GPIO0_00 1 +#define SC_P_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT SC_P_MIPI_DSI1_GPIO0_00 2 +#define SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 SC_P_MIPI_DSI1_GPIO0_00 4 +#define SC_P_MIPI_DSI1_GPIO0_01_MIPI_DSI1_GPIO0_IO01 SC_P_MIPI_DSI1_GPIO0_01 0 +#define SC_P_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA SC_P_MIPI_DSI1_GPIO0_01 1 +#define SC_P_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 SC_P_MIPI_DSI1_GPIO0_01 4 +#define SC_P_JTAG_TRST_B_SCU_JTAG_TRST_B SC_P_JTAG_TRST_B 0 +#define SC_P_JTAG_TRST_B_SCU_WDOG0_WDOG_OUT SC_P_JTAG_TRST_B 1 +#define SC_P_PMIC_I2C_SCL_SCU_PMIC_I2C_SCL SC_P_PMIC_I2C_SCL 0 +#define SC_P_PMIC_I2C_SCL_SCU_GPIO0_IOXX_PMIC_A35_ON SC_P_PMIC_I2C_SCL 1 +#define SC_P_PMIC_I2C_SCL_LSIO_GPIO2_IO01 SC_P_PMIC_I2C_SCL 4 +#define SC_P_PMIC_I2C_SDA_SCU_PMIC_I2C_SDA SC_P_PMIC_I2C_SDA 0 +#define SC_P_PMIC_I2C_SDA_SCU_GPIO0_IOXX_PMIC_GPU_ON SC_P_PMIC_I2C_SDA 1 +#define SC_P_PMIC_I2C_SDA_LSIO_GPIO2_IO02 SC_P_PMIC_I2C_SDA 4 +#define SC_P_PMIC_INT_B_SCU_DSC_PMIC_INT_B SC_P_PMIC_INT_B 0 +#define SC_P_SCU_GPIO0_00_SCU_GPIO0_IO00 SC_P_SCU_GPIO0_00 0 +#define SC_P_SCU_GPIO0_00_SCU_UART0_RX SC_P_SCU_GPIO0_00 1 +#define SC_P_SCU_GPIO0_00_M40_UART0_RX SC_P_SCU_GPIO0_00 2 +#define SC_P_SCU_GPIO0_00_ADMA_UART3_RX SC_P_SCU_GPIO0_00 3 +#define SC_P_SCU_GPIO0_00_LSIO_GPIO2_IO03 SC_P_SCU_GPIO0_00 4 +#define SC_P_SCU_GPIO0_01_SCU_GPIO0_IO01 SC_P_SCU_GPIO0_01 0 +#define SC_P_SCU_GPIO0_01_SCU_UART0_TX SC_P_SCU_GPIO0_01 1 +#define SC_P_SCU_GPIO0_01_M40_UART0_TX SC_P_SCU_GPIO0_01 2 +#define SC_P_SCU_GPIO0_01_ADMA_UART3_TX SC_P_SCU_GPIO0_01 3 +#define SC_P_SCU_GPIO0_01_SCU_WDOG0_WDOG_OUT SC_P_SCU_GPIO0_01 4 +#define SC_P_SCU_PMIC_STANDBY_SCU_DSC_PMIC_STANDBY SC_P_SCU_PMIC_STANDBY 0 +#define SC_P_SCU_BOOT_MODE0_SCU_DSC_BOOT_MODE0 SC_P_SCU_BOOT_MODE0 0 +#define SC_P_SCU_BOOT_MODE1_SCU_DSC_BOOT_MODE1 SC_P_SCU_BOOT_MODE1 0 +#define SC_P_SCU_BOOT_MODE2_SCU_DSC_BOOT_MODE2 SC_P_SCU_BOOT_MODE2 0 +#define SC_P_SCU_BOOT_MODE2_SCU_PMIC_I2C_SDA SC_P_SCU_BOOT_MODE2 1 +#define SC_P_SCU_BOOT_MODE3_SCU_DSC_BOOT_MODE3 SC_P_SCU_BOOT_MODE3 0 +#define SC_P_SCU_BOOT_MODE3_SCU_PMIC_I2C_SCL SC_P_SCU_BOOT_MODE3 1 +#define SC_P_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K SC_P_SCU_BOOT_MODE3 3 +#define SC_P_CSI_D00_CI_PI_D02 SC_P_CSI_D00 0 +#define SC_P_CSI_D00_ADMA_SAI0_RXC SC_P_CSI_D00 2 +#define SC_P_CSI_D01_CI_PI_D03 SC_P_CSI_D01 0 +#define SC_P_CSI_D01_ADMA_SAI0_RXD SC_P_CSI_D01 2 +#define SC_P_CSI_D02_CI_PI_D04 SC_P_CSI_D02 0 +#define SC_P_CSI_D02_ADMA_SAI0_RXFS SC_P_CSI_D02 2 +#define SC_P_CSI_D03_CI_PI_D05 SC_P_CSI_D03 0 +#define SC_P_CSI_D03_ADMA_SAI2_RXC SC_P_CSI_D03 2 +#define SC_P_CSI_D04_CI_PI_D06 SC_P_CSI_D04 0 +#define SC_P_CSI_D04_ADMA_SAI2_RXD SC_P_CSI_D04 2 +#define SC_P_CSI_D05_CI_PI_D07 SC_P_CSI_D05 0 +#define SC_P_CSI_D05_ADMA_SAI2_RXFS SC_P_CSI_D05 2 +#define SC_P_CSI_D06_CI_PI_D08 SC_P_CSI_D06 0 +#define SC_P_CSI_D06_ADMA_SAI3_RXC SC_P_CSI_D06 2 +#define SC_P_CSI_D07_CI_PI_D09 SC_P_CSI_D07 0 +#define SC_P_CSI_D07_ADMA_SAI3_RXD SC_P_CSI_D07 2 +#define SC_P_CSI_HSYNC_CI_PI_HSYNC SC_P_CSI_HSYNC 0 +#define SC_P_CSI_HSYNC_CI_PI_D00 SC_P_CSI_HSYNC 1 +#define SC_P_CSI_HSYNC_ADMA_SAI3_RXFS SC_P_CSI_HSYNC 2 +#define SC_P_CSI_VSYNC_CI_PI_VSYNC SC_P_CSI_VSYNC 0 +#define SC_P_CSI_VSYNC_CI_PI_D01 SC_P_CSI_VSYNC 1 +#define SC_P_CSI_PCLK_CI_PI_PCLK SC_P_CSI_PCLK 0 +#define SC_P_CSI_PCLK_MIPI_CSI0_I2C0_SCL SC_P_CSI_PCLK 1 +#define SC_P_CSI_PCLK_ADMA_SPI1_SCK SC_P_CSI_PCLK 3 +#define SC_P_CSI_PCLK_LSIO_GPIO3_IO00 SC_P_CSI_PCLK 4 +#define SC_P_CSI_MCLK_CI_PI_MCLK SC_P_CSI_MCLK 0 +#define SC_P_CSI_MCLK_MIPI_CSI0_I2C0_SDA SC_P_CSI_MCLK 1 +#define SC_P_CSI_MCLK_ADMA_SPI1_SDO SC_P_CSI_MCLK 3 +#define SC_P_CSI_MCLK_LSIO_GPIO3_IO01 SC_P_CSI_MCLK 4 +#define SC_P_CSI_EN_CI_PI_EN SC_P_CSI_EN 0 +#define SC_P_CSI_EN_CI_PI_I2C_SCL SC_P_CSI_EN 1 +#define SC_P_CSI_EN_ADMA_I2C3_SCL SC_P_CSI_EN 2 +#define SC_P_CSI_EN_ADMA_SPI1_SDI SC_P_CSI_EN 3 +#define SC_P_CSI_EN_LSIO_GPIO3_IO02 SC_P_CSI_EN 4 +#define SC_P_CSI_RESET_CI_PI_RESET SC_P_CSI_RESET 0 +#define SC_P_CSI_RESET_CI_PI_I2C_SDA SC_P_CSI_RESET 1 +#define SC_P_CSI_RESET_ADMA_I2C3_SDA SC_P_CSI_RESET 2 +#define SC_P_CSI_RESET_ADMA_SPI1_CS0 SC_P_CSI_RESET 3 +#define SC_P_CSI_RESET_LSIO_GPIO3_IO03 SC_P_CSI_RESET 4 +#define SC_P_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT SC_P_MIPI_CSI0_MCLK_OUT 0 +#define SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 SC_P_MIPI_CSI0_MCLK_OUT 4 +#define SC_P_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL SC_P_MIPI_CSI0_I2C0_SCL 0 +#define SC_P_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_GPIO0_IO02 SC_P_MIPI_CSI0_I2C0_SCL 1 +#define SC_P_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 SC_P_MIPI_CSI0_I2C0_SCL 4 +#define SC_P_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA SC_P_MIPI_CSI0_I2C0_SDA 0 +#define SC_P_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_GPIO0_IO03 SC_P_MIPI_CSI0_I2C0_SDA 1 +#define SC_P_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 SC_P_MIPI_CSI0_I2C0_SDA 4 +#define SC_P_MIPI_CSI0_GPIO0_01_MIPI_CSI0_GPIO0_IO01 SC_P_MIPI_CSI0_GPIO0_01 0 +#define SC_P_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA SC_P_MIPI_CSI0_GPIO0_01 1 +#define SC_P_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07 SC_P_MIPI_CSI0_GPIO0_01 4 +#define SC_P_MIPI_CSI0_GPIO0_00_MIPI_CSI0_GPIO0_IO00 SC_P_MIPI_CSI0_GPIO0_00 0 +#define SC_P_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL SC_P_MIPI_CSI0_GPIO0_00 1 +#define SC_P_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08 SC_P_MIPI_CSI0_GPIO0_00 4 +#define SC_P_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 SC_P_QSPI0A_DATA0 0 +#define SC_P_QSPI0A_DATA0_LSIO_GPIO3_IO09 SC_P_QSPI0A_DATA0 4 +#define SC_P_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 SC_P_QSPI0A_DATA1 0 +#define SC_P_QSPI0A_DATA1_LSIO_GPIO3_IO10 SC_P_QSPI0A_DATA1 4 +#define SC_P_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 SC_P_QSPI0A_DATA2 0 +#define SC_P_QSPI0A_DATA2_LSIO_GPIO3_IO11 SC_P_QSPI0A_DATA2 4 +#define SC_P_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 SC_P_QSPI0A_DATA3 0 +#define SC_P_QSPI0A_DATA3_LSIO_GPIO3_IO12 SC_P_QSPI0A_DATA3 4 +#define SC_P_QSPI0A_DQS_LSIO_QSPI0A_DQS SC_P_QSPI0A_DQS 0 +#define SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 SC_P_QSPI0A_DQS 4 +#define SC_P_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B SC_P_QSPI0A_SS0_B 0 +#define SC_P_QSPI0A_SS0_B_LSIO_GPIO3_IO14 SC_P_QSPI0A_SS0_B 4 +#define SC_P_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B SC_P_QSPI0A_SS1_B 0 +#define SC_P_QSPI0A_SS1_B_LSIO_GPIO3_IO15 SC_P_QSPI0A_SS1_B 4 +#define SC_P_QSPI0A_SCLK_LSIO_QSPI0A_SCLK SC_P_QSPI0A_SCLK 0 +#define SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 SC_P_QSPI0A_SCLK 4 +#define SC_P_QSPI0B_SCLK_LSIO_QSPI0B_SCLK SC_P_QSPI0B_SCLK 0 +#define SC_P_QSPI0B_SCLK_LSIO_QSPI1A_SCLK SC_P_QSPI0B_SCLK 1 +#define SC_P_QSPI0B_SCLK_LSIO_KPP0_COL0 SC_P_QSPI0B_SCLK 2 +#define SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 SC_P_QSPI0B_SCLK 4 +#define SC_P_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 SC_P_QSPI0B_DATA0 0 +#define SC_P_QSPI0B_DATA0_LSIO_QSPI1A_DATA0 SC_P_QSPI0B_DATA0 1 +#define SC_P_QSPI0B_DATA0_LSIO_KPP0_COL1 SC_P_QSPI0B_DATA0 2 +#define SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 SC_P_QSPI0B_DATA0 4 +#define SC_P_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 SC_P_QSPI0B_DATA1 0 +#define SC_P_QSPI0B_DATA1_LSIO_QSPI1A_DATA1 SC_P_QSPI0B_DATA1 1 +#define SC_P_QSPI0B_DATA1_LSIO_KPP0_COL2 SC_P_QSPI0B_DATA1 2 +#define SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 SC_P_QSPI0B_DATA1 4 +#define SC_P_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 SC_P_QSPI0B_DATA2 0 +#define SC_P_QSPI0B_DATA2_LSIO_QSPI1A_DATA2 SC_P_QSPI0B_DATA2 1 +#define SC_P_QSPI0B_DATA2_LSIO_KPP0_COL3 SC_P_QSPI0B_DATA2 2 +#define SC_P_QSPI0B_DATA2_LSIO_GPIO3_IO20 SC_P_QSPI0B_DATA2 4 +#define SC_P_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 SC_P_QSPI0B_DATA3 0 +#define SC_P_QSPI0B_DATA3_LSIO_QSPI1A_DATA3 SC_P_QSPI0B_DATA3 1 +#define SC_P_QSPI0B_DATA3_LSIO_KPP0_ROW0 SC_P_QSPI0B_DATA3 2 +#define SC_P_QSPI0B_DATA3_LSIO_GPIO3_IO21 SC_P_QSPI0B_DATA3 4 +#define SC_P_QSPI0B_DQS_LSIO_QSPI0B_DQS SC_P_QSPI0B_DQS 0 +#define SC_P_QSPI0B_DQS_LSIO_QSPI1A_DQS SC_P_QSPI0B_DQS 1 +#define SC_P_QSPI0B_DQS_LSIO_KPP0_ROW1 SC_P_QSPI0B_DQS 2 +#define SC_P_QSPI0B_DQS_LSIO_GPIO3_IO22 SC_P_QSPI0B_DQS 4 +#define SC_P_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B SC_P_QSPI0B_SS0_B 0 +#define SC_P_QSPI0B_SS0_B_LSIO_QSPI1A_SS0_B SC_P_QSPI0B_SS0_B 1 +#define SC_P_QSPI0B_SS0_B_LSIO_KPP0_ROW2 SC_P_QSPI0B_SS0_B 2 +#define SC_P_QSPI0B_SS0_B_LSIO_GPIO3_IO23 SC_P_QSPI0B_SS0_B 4 +#define SC_P_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B SC_P_QSPI0B_SS1_B 0 +#define SC_P_QSPI0B_SS1_B_LSIO_QSPI1A_SS1_B SC_P_QSPI0B_SS1_B 1 +#define SC_P_QSPI0B_SS1_B_LSIO_KPP0_ROW3 SC_P_QSPI0B_SS1_B 2 +#define SC_P_QSPI0B_SS1_B_LSIO_GPIO3_IO24 SC_P_QSPI0B_SS1_B 4 + +#endif /* _SC_PADS_H */

From: Peng Fan peng.fan@nxp.com

Add i.MX8QXP power and resource definition

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- include/dt-bindings/soc/imx8_pd.h | 188 ++++++++++ include/dt-bindings/soc/imx_rsrc.h | 557 +++++++++++++++++++++++++++++ 2 files changed, 745 insertions(+) create mode 100644 include/dt-bindings/soc/imx8_pd.h create mode 100644 include/dt-bindings/soc/imx_rsrc.h

diff --git a/include/dt-bindings/soc/imx8_pd.h b/include/dt-bindings/soc/imx8_pd.h new file mode 100644 index 0000000000..682b608eef --- /dev/null +++ b/include/dt-bindings/soc/imx8_pd.h @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __DT_BINDINGS_IMX8_PD_H +#define __DT_BINDINGS_IMX8_PD_H + +/*! + * These defines are used to indicate a resource. Resources include peripherals + * and bus masters (but not memory regions). Note items from list should + * never be changed or removed (only added to at the end of the list). + */ +#define PD_DC_0 dc0_power_domain +#define PD_DC_0_PLL_0 dc0_pll0 +#define PD_DC_0_PLL_1 dc0_pll1 +#define PD_LVDS0 lvds0_power_domain +#define PD_LVDS0_I2C0 lvds0_i2c0 +#define PD_LVDS0_I2C1 lvds0_i2c1 +#define PD_LVDS0_PWM lvds0_pwm +#define PD_LVDS0_PWM lvds0_pwm +#define PD_LVDS0_GPIO lvds0_gpio +#define PD_DC_1 dc1_power_domain +#define PD_DC_1_PLL_0 dc1_pll0 +#define PD_DC_1_PLL_1 dc1_pll1 +#define PD_LVDS1 lvds1_power_domain +#define PD_LVDS1_I2C0 lvds1_i2c0 +#define PD_LVDS1_I2C1 lvds1_i2c1 +#define PD_LVDS1_PWM lvds1_pwm +#define PD_LVDS1_GPIO lvds1_gpio + +#define PD_DMA dma_power_domain +#define PD_DMA_SPI_0 dma_spi0 +#define PD_DMA_SPI_1 dma_spi1 +#define PD_DMA_SPI_2 dma_spi2 +#define PD_DMA_SPI_3 dma_spi3 +#define PD_DMA_UART0 dma_lpuart0 +#define PD_DMA_UART1 dma_lpuart1 +#define PD_DMA_UART2 dma_lpuart2 +#define PD_DMA_UART3 dma_lpuart3 +#define PD_DMA_UART4 dma_lpuart4 +#define PD_DMA_EMVSIM_0 dma_emvsim0 +#define PD_DMA_EMVSIM_1 dma_emvsim1 +#define PD_DMA_I2C_0 dma_lpi2c0 +#define PD_DMA_I2C_1 dma_lpi2c1 +#define PD_DMA_I2C_2 dma_lpi2c2 +#define PD_DMA_I2C_3 dma_lpi2c3 +#define PD_DMA_I2C_4 dma_lpi2c4 +#define PD_DMA_ADC_0 dma_adc0 +#define PD_DMA_ADC_1 dma_adc1 +#define PD_DMA_FTM_0 dma_ftm0 +#define PD_DMA_FTM_1 dma_ftm1 +#define PD_DMA_CAN_0 dma_flexcan0 +#define PD_DMA_CAN_1 dma_flexcan1 +#define PD_DMA_CAN_2 dma_flexcan2 +#define PD_DMA_PWM_0 dma_pwm0 +#define PD_DMA_LCD_0 dma_lcd0 + +#define PD_HSIO hsio_power_domain +#define PD_HSIO_PCIE_A hsio_pcie0 +#define PD_HSIO_PCIE_B hsio_pcie1 +#define PD_HSIO_SATA_0 hsio_sata0 +#define PD_HSIO_GPIO hsio_gpio + +#define PD_LCD_0 lcd0_power_domain +#define PD_LCD_0_I2C_0 lcd0_i2c0 +#define PD_LCD_0_I2C_1 lcd0_i2c1 +#define PD_LCD_PWM_0 lcd0_pwm0 + +#define PD_LSIO lsio_power_domain +#define PD_LSIO_GPIO_0 lsio_gpio0 +#define PD_LSIO_GPIO_1 lsio_gpio1 +#define PD_LSIO_GPIO_2 lsio_gpio2 +#define PD_LSIO_GPIO_3 lsio_gpio3 +#define PD_LSIO_GPIO_4 lsio_gpio4 +#define PD_LSIO_GPIO_5 lsio_gpio5 +#define PD_LSIO_GPIO_6 lsio_gpio6 +#define PD_LSIO_GPIO_7 lsio_gpio7 +#define PD_LSIO_GPT_0 lsio_gpt0 +#define PD_LSIO_GPT_1 lsio_gpt1 +#define PD_LSIO_GPT_2 lsio_gpt2 +#define PD_LSIO_GPT_3 lsio_gpt3 +#define PD_LSIO_GPT_4 lsio_gpt4 +#define PD_LSIO_KPP lsio_kpp +#define PD_LSIO_FSPI_0 lsio_fspi0 +#define PD_LSIO_FSPI_1 lsio_fspi1 +#define PD_LSIO_PWM_0 lsio_pwm0 +#define PD_LSIO_PWM_1 lsio_pwm1 +#define PD_LSIO_PWM_2 lsio_pwm2 +#define PD_LSIO_PWM_3 lsio_pwm3 +#define PD_LSIO_PWM_4 lsio_pwm4 +#define PD_LSIO_PWM_5 lsio_pwm5 +#define PD_LSIO_PWM_6 lsio_pwm6 +#define PD_LSIO_PWM_7 lsio_pwm7 + +#define PD_CONN connectivity_power_domain +#define PD_CONN_SDHC_0 conn_sdhc0 +#define PD_CONN_SDHC_1 conn_sdhc1 +#define PD_CONN_SDHC_2 conn_sdhc2 +#define PD_CONN_ENET_0 conn_enet0 +#define PD_CONN_ENET_1 conn_enet1 +#define PD_CONN_MLB_0 conn_mlb0 +#define PD_CONN_DMA_4_CH0 conn_dma4_ch0 +#define PD_CONN_DMA_4_CH1 conn_dma4_ch1 +#define PD_CONN_DMA_4_CH2 conn_dma4_ch2 +#define PD_CONN_DMA_4_CH3 conn_dma4_ch3 +#define PD_CONN_DMA_4_CH4 conn_dma4_ch4 +#define PD_CONN_USB_0 conn_usb0 +#define PD_CONN_USB_1 conn_usb1 +#define PD_CONN_USB_0_PHY conn_usb0_phy +#define PD_CONN_USB_2 conn_usb2 +#define PD_CONN_USB_2_PHY conn_usb2_phy +#define PD_CONN_NAND conn_nand + +#define PD_AUDIO audio_power_domain +#define PD_AUD_SAI_0 audio_sai0 +#define PD_AUD_SAI_1 audio_sai1 +#define PD_AUD_SAI_2 audio_sai2 +#define PD_AUD_ASRC_0 audio_asrc0 +#define PD_AUD_ASRC_1 audio_asrc1 +#define PD_AUD_ESAI_0 audio_esai0 +#define PD_AUD_ESAI_1 audio_esai1 +#define PD_AUD_SPDIF_0 audio_spdif0 +#define PD_AUD_SPDIF_1 audio_spdif1 +#define PD_AUD_SAI_3 audio_sai3 +#define PD_AUD_SAI_4 audio_sai4 +#define PD_AUD_SAI_5 audio_sai5 +#define PD_AUD_SAI_6 audio_sai6 +#define PD_AUD_SAI_7 audio_sai7 +#define PD_AUD_GPT_5 audio_gpt5 +#define PD_AUD_GPT_6 audio_gpt6 +#define PD_AUD_GPT_7 audio_gpt7 +#define PD_AUD_GPT_8 audio_gpt8 +#define PD_AUD_GPT_9 audio_gpt9 +#define PD_AUD_GPT_10 audio_gpt10 +#define PD_AUD_AMIX audio_amix +#define PD_AUD_MQS_0 audio_mqs0 +#define PD_AUD_HIFI audio_hifi +#define PD_AUD_OCRAM audio_ocram +#define PD_AUD_MCLK_OUT_0 audio_mclkout0 +#define PD_AUD_MCLK_OUT_1 audio_mclkout1 +#define PD_AUD_AUDIO_PLL_0 audio_audiopll0 +#define PD_AUD_AUDIO_PLL_1 audio_audiopll1 +#define PD_AUD_AUDIO_CLK_0 audio_audioclk0 +#define PD_AUD_AUDIO_CLK_1 audio_audioclk1 + +#define PD_IMAGING imaging_power_domain +#define PD_IMAGING_JPEG_DEC imaging_jpeg_dec +#define PD_IMAGING_JPEG_ENC imaging_jpeg_enc +#define PD_IMAGING_PDMA0 PD_IMAGING +#define PD_IMAGING_PDMA1 imaging_pdma1 +#define PD_IMAGING_PDMA2 imaging_pdma2 +#define PD_IMAGING_PDMA3 imaging_pdma3 +#define PD_IMAGING_PDMA4 imaging_pdma4 +#define PD_IMAGING_PDMA5 imaging_pdma5 +#define PD_IMAGING_PDMA6 imaging_pdma6 +#define PD_IMAGING_PDMA7 imaging_pdma7 + +#define PD_MIPI_0_DSI mipi0_dsi_power_domain +#define PD_MIPI_0_DSI_I2C0 mipi0_dsi_i2c0 +#define PD_MIPI_0_DSI_I2C1 mipi0_dsi_i2c1 +#define PD_MIPI_0_DSI_PWM0 mipi0_dsi_pwm0 +#define PD_MIPI_1_DSI mipi1_dsi_power_domain +#define PD_MIPI_1_DSI_I2C0 mipi1_dsi_i2c0 +#define PD_MIPI_1_DSI_I2C1 mipi1_dsi_i2c1 +#define PD_MIPI_1_DSI_PWM0 mipi1_dsi_pwm0 + +#define PD_MIPI_CSI0 mipi_csi0_power_domain +#define PD_MIPI_CSI0_PWM mipi_csi0_pwm +#define PD_MIPI_CSI0_I2C mipi_csi0_i2c +#define PD_MIPI_CSI1 mipi_csi1_power_domain +#define PD_MIPI_CSI1_PWM_0 mipi_csi1_pwm +#define PD_MIPI_CSI1_I2C_0 mipi_csi1_i2c + +#define PD_HDMI hdmi_power_domain +#define PD_HDMI_I2C_0 hdmi_i2c +#define PD_HDMI_PWM_0 hdmi_pwm +#define PD_HDMI_GPIO_0 hdmi_gpio + +#define PD_HDMI_RX hdmi_rx_power_domain +#define PD_HDMI_RX_I2C hdmi_rx_i2c +#define PD_HDMI_RX_PWM hdmi_rx_pwm + +#define PD_CM40 cm40_power_domain +#define PD_CM40_I2C cm40_i2c +#define PD_CM40_INTMUX cm40_intmux + +#endif /* __DT_BINDINGS_IMX8_PD_H */ diff --git a/include/dt-bindings/soc/imx_rsrc.h b/include/dt-bindings/soc/imx_rsrc.h new file mode 100644 index 0000000000..4870eb985b --- /dev/null +++ b/include/dt-bindings/soc/imx_rsrc.h @@ -0,0 +1,557 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef DT_BINDINGS_RSCRC_IMX_H +#define DT_BINDINGS_RSCRC_IMX_H + +/*! + * These defines are used to indicate a resource. Resources include peripherals + * and bus masters (but not memory regions). Note items from list should + * never be changed or removed (only added to at the end of the list). + */ +#define SC_R_A53 0 +#define SC_R_A53_0 1 +#define SC_R_A53_1 2 +#define SC_R_A53_2 3 +#define SC_R_A53_3 4 +#define SC_R_A72 5 +#define SC_R_A72_0 6 +#define SC_R_A72_1 7 +#define SC_R_A72_2 8 +#define SC_R_A72_3 9 +#define SC_R_CCI 10 +#define SC_R_DB 11 +#define SC_R_DRC_0 12 +#define SC_R_DRC_1 13 +#define SC_R_GIC_SMMU 14 +#define SC_R_IRQSTR_M4_0 15 +#define SC_R_IRQSTR_M4_1 16 +#define SC_R_SMMU 17 +#define SC_R_GIC 18 +#define SC_R_DC_0_BLIT0 19 +#define SC_R_DC_0_BLIT1 20 +#define SC_R_DC_0_BLIT2 21 +#define SC_R_DC_0_BLIT_OUT 22 +#define SC_R_DC_0_CAPTURE0 23 +#define SC_R_DC_0_CAPTURE1 24 +#define SC_R_DC_0_WARP 25 +#define SC_R_DC_0_INTEGRAL0 26 +#define SC_R_DC_0_INTEGRAL1 27 +#define SC_R_DC_0_VIDEO0 28 +#define SC_R_DC_0_VIDEO1 29 +#define SC_R_DC_0_FRAC0 30 +#define SC_R_DC_0_FRAC1 31 +#define SC_R_DC_0 32 +#define SC_R_GPU_2_PID0 33 +#define SC_R_DC_0_PLL_0 34 +#define SC_R_DC_0_PLL_1 35 +#define SC_R_DC_1_BLIT0 36 +#define SC_R_DC_1_BLIT1 37 +#define SC_R_DC_1_BLIT2 38 +#define SC_R_DC_1_BLIT_OUT 39 +#define SC_R_DC_1_CAPTURE0 40 +#define SC_R_DC_1_CAPTURE1 41 +#define SC_R_DC_1_WARP 42 +#define SC_R_DC_1_INTEGRAL0 43 +#define SC_R_DC_1_INTEGRAL1 44 +#define SC_R_DC_1_VIDEO0 45 +#define SC_R_DC_1_VIDEO1 46 +#define SC_R_DC_1_FRAC0 47 +#define SC_R_DC_1_FRAC1 48 +#define SC_R_DC_1 49 +#define SC_R_GPU_3_PID0 50 +#define SC_R_DC_1_PLL_0 51 +#define SC_R_DC_1_PLL_1 52 +#define SC_R_SPI_0 53 +#define SC_R_SPI_1 54 +#define SC_R_SPI_2 55 +#define SC_R_SPI_3 56 +#define SC_R_UART_0 57 +#define SC_R_UART_1 58 +#define SC_R_UART_2 59 +#define SC_R_UART_3 60 +#define SC_R_UART_4 61 +#define SC_R_EMVSIM_0 62 +#define SC_R_EMVSIM_1 63 +#define SC_R_DMA_0_CH0 64 +#define SC_R_DMA_0_CH1 65 +#define SC_R_DMA_0_CH2 66 +#define SC_R_DMA_0_CH3 67 +#define SC_R_DMA_0_CH4 68 +#define SC_R_DMA_0_CH5 69 +#define SC_R_DMA_0_CH6 70 +#define SC_R_DMA_0_CH7 71 +#define SC_R_DMA_0_CH8 72 +#define SC_R_DMA_0_CH9 73 +#define SC_R_DMA_0_CH10 74 +#define SC_R_DMA_0_CH11 75 +#define SC_R_DMA_0_CH12 76 +#define SC_R_DMA_0_CH13 77 +#define SC_R_DMA_0_CH14 78 +#define SC_R_DMA_0_CH15 79 +#define SC_R_DMA_0_CH16 80 +#define SC_R_DMA_0_CH17 81 +#define SC_R_DMA_0_CH18 82 +#define SC_R_DMA_0_CH19 83 +#define SC_R_DMA_0_CH20 84 +#define SC_R_DMA_0_CH21 85 +#define SC_R_DMA_0_CH22 86 +#define SC_R_DMA_0_CH23 87 +#define SC_R_DMA_0_CH24 88 +#define SC_R_DMA_0_CH25 89 +#define SC_R_DMA_0_CH26 90 +#define SC_R_DMA_0_CH27 91 +#define SC_R_DMA_0_CH28 92 +#define SC_R_DMA_0_CH29 93 +#define SC_R_DMA_0_CH30 94 +#define SC_R_DMA_0_CH31 95 +#define SC_R_I2C_0 96 +#define SC_R_I2C_1 97 +#define SC_R_I2C_2 98 +#define SC_R_I2C_3 99 +#define SC_R_I2C_4 100 +#define SC_R_ADC_0 101 +#define SC_R_ADC_1 102 +#define SC_R_FTM_0 103 +#define SC_R_FTM_1 104 +#define SC_R_CAN_0 105 +#define SC_R_CAN_1 106 +#define SC_R_CAN_2 107 +#define SC_R_DMA_1_CH0 108 +#define SC_R_DMA_1_CH1 109 +#define SC_R_DMA_1_CH2 110 +#define SC_R_DMA_1_CH3 111 +#define SC_R_DMA_1_CH4 112 +#define SC_R_DMA_1_CH5 113 +#define SC_R_DMA_1_CH6 114 +#define SC_R_DMA_1_CH7 115 +#define SC_R_DMA_1_CH8 116 +#define SC_R_DMA_1_CH9 117 +#define SC_R_DMA_1_CH10 118 +#define SC_R_DMA_1_CH11 119 +#define SC_R_DMA_1_CH12 120 +#define SC_R_DMA_1_CH13 121 +#define SC_R_DMA_1_CH14 122 +#define SC_R_DMA_1_CH15 123 +#define SC_R_DMA_1_CH16 124 +#define SC_R_DMA_1_CH17 125 +#define SC_R_DMA_1_CH18 126 +#define SC_R_DMA_1_CH19 127 +#define SC_R_DMA_1_CH20 128 +#define SC_R_DMA_1_CH21 129 +#define SC_R_DMA_1_CH22 130 +#define SC_R_DMA_1_CH23 131 +#define SC_R_DMA_1_CH24 132 +#define SC_R_DMA_1_CH25 133 +#define SC_R_DMA_1_CH26 134 +#define SC_R_DMA_1_CH27 135 +#define SC_R_DMA_1_CH28 136 +#define SC_R_DMA_1_CH29 137 +#define SC_R_DMA_1_CH30 138 +#define SC_R_DMA_1_CH31 139 +#define SC_R_UNUSED1 140 +#define SC_R_UNUSED2 141 +#define SC_R_UNUSED3 142 +#define SC_R_UNUSED4 143 +#define SC_R_GPU_0_PID0 144 +#define SC_R_GPU_0_PID1 145 +#define SC_R_GPU_0_PID2 146 +#define SC_R_GPU_0_PID3 147 +#define SC_R_GPU_1_PID0 148 +#define SC_R_GPU_1_PID1 149 +#define SC_R_GPU_1_PID2 150 +#define SC_R_GPU_1_PID3 151 +#define SC_R_PCIE_A 152 +#define SC_R_SERDES_0 153 +#define SC_R_MATCH_0 154 +#define SC_R_MATCH_1 155 +#define SC_R_MATCH_2 156 +#define SC_R_MATCH_3 157 +#define SC_R_MATCH_4 158 +#define SC_R_MATCH_5 159 +#define SC_R_MATCH_6 160 +#define SC_R_MATCH_7 161 +#define SC_R_MATCH_8 162 +#define SC_R_MATCH_9 163 +#define SC_R_MATCH_10 164 +#define SC_R_MATCH_11 165 +#define SC_R_MATCH_12 166 +#define SC_R_MATCH_13 167 +#define SC_R_MATCH_14 168 +#define SC_R_PCIE_B 169 +#define SC_R_SATA_0 170 +#define SC_R_SERDES_1 171 +#define SC_R_HSIO_GPIO 172 +#define SC_R_MATCH_15 173 +#define SC_R_MATCH_16 174 +#define SC_R_MATCH_17 175 +#define SC_R_MATCH_18 176 +#define SC_R_MATCH_19 177 +#define SC_R_MATCH_20 178 +#define SC_R_MATCH_21 179 +#define SC_R_MATCH_22 180 +#define SC_R_MATCH_23 181 +#define SC_R_MATCH_24 182 +#define SC_R_MATCH_25 183 +#define SC_R_MATCH_26 184 +#define SC_R_MATCH_27 185 +#define SC_R_MATCH_28 186 +#define SC_R_LCD_0 187 +#define SC_R_LCD_0_PWM_0 188 +#define SC_R_LCD_0_I2C_0 189 +#define SC_R_LCD_0_I2C_1 190 +#define SC_R_PWM_0 191 +#define SC_R_PWM_1 192 +#define SC_R_PWM_2 193 +#define SC_R_PWM_3 194 +#define SC_R_PWM_4 195 +#define SC_R_PWM_5 196 +#define SC_R_PWM_6 197 +#define SC_R_PWM_7 198 +#define SC_R_GPIO_0 199 +#define SC_R_GPIO_1 200 +#define SC_R_GPIO_2 201 +#define SC_R_GPIO_3 202 +#define SC_R_GPIO_4 203 +#define SC_R_GPIO_5 204 +#define SC_R_GPIO_6 205 +#define SC_R_GPIO_7 206 +#define SC_R_GPT_0 207 +#define SC_R_GPT_1 208 +#define SC_R_GPT_2 209 +#define SC_R_GPT_3 210 +#define SC_R_GPT_4 211 +#define SC_R_KPP 212 +#define SC_R_MU_0A 213 +#define SC_R_MU_1A 214 +#define SC_R_MU_2A 215 +#define SC_R_MU_3A 216 +#define SC_R_MU_4A 217 +#define SC_R_MU_5A 218 +#define SC_R_MU_6A 219 +#define SC_R_MU_7A 220 +#define SC_R_MU_8A 221 +#define SC_R_MU_9A 222 +#define SC_R_MU_10A 223 +#define SC_R_MU_11A 224 +#define SC_R_MU_12A 225 +#define SC_R_MU_13A 226 +#define SC_R_MU_5B 227 +#define SC_R_MU_6B 228 +#define SC_R_MU_7B 229 +#define SC_R_MU_8B 230 +#define SC_R_MU_9B 231 +#define SC_R_MU_10B 232 +#define SC_R_MU_11B 233 +#define SC_R_MU_12B 234 +#define SC_R_MU_13B 235 +#define SC_R_ROM_0 236 +#define SC_R_FSPI_0 237 +#define SC_R_FSPI_1 238 +#define SC_R_IEE 239 +#define SC_R_IEE_R0 240 +#define SC_R_IEE_R1 241 +#define SC_R_IEE_R2 242 +#define SC_R_IEE_R3 243 +#define SC_R_IEE_R4 244 +#define SC_R_IEE_R5 245 +#define SC_R_IEE_R6 246 +#define SC_R_IEE_R7 247 +#define SC_R_SDHC_0 248 +#define SC_R_SDHC_1 249 +#define SC_R_SDHC_2 250 +#define SC_R_ENET_0 251 +#define SC_R_ENET_1 252 +#define SC_R_MLB_0 253 +#define SC_R_DMA_2_CH0 254 +#define SC_R_DMA_2_CH1 255 +#define SC_R_DMA_2_CH2 256 +#define SC_R_DMA_2_CH3 257 +#define SC_R_DMA_2_CH4 258 +#define SC_R_USB_0 259 +#define SC_R_USB_1 260 +#define SC_R_USB_0_PHY 261 +#define SC_R_USB_2 262 +#define SC_R_USB_2_PHY 263 +#define SC_R_DTCP 264 +#define SC_R_NAND 265 +#define SC_R_LVDS_0 266 +#define SC_R_LVDS_0_PWM_0 267 +#define SC_R_LVDS_0_I2C_0 268 +#define SC_R_LVDS_0_I2C_1 269 +#define SC_R_LVDS_1 270 +#define SC_R_LVDS_1_PWM_0 271 +#define SC_R_LVDS_1_I2C_0 272 +#define SC_R_LVDS_1_I2C_1 273 +#define SC_R_LVDS_2 274 +#define SC_R_LVDS_2_PWM_0 275 +#define SC_R_LVDS_2_I2C_0 276 +#define SC_R_LVDS_2_I2C_1 277 +#define SC_R_M4_0_PID0 278 +#define SC_R_M4_0_PID1 279 +#define SC_R_M4_0_PID2 280 +#define SC_R_M4_0_PID3 281 +#define SC_R_M4_0_PID4 282 +#define SC_R_M4_0_RGPIO 283 +#define SC_R_M4_0_SEMA42 284 +#define SC_R_M4_0_TPM 285 +#define SC_R_M4_0_PIT 286 +#define SC_R_M4_0_UART 287 +#define SC_R_M4_0_I2C 288 +#define SC_R_M4_0_INTMUX 289 +#define SC_R_M4_0_SIM 290 +#define SC_R_M4_0_WDOG 291 +#define SC_R_M4_0_MU_0B 292 +#define SC_R_M4_0_MU_0A0 293 +#define SC_R_M4_0_MU_0A1 294 +#define SC_R_M4_0_MU_0A2 295 +#define SC_R_M4_0_MU_0A3 296 +#define SC_R_M4_0_MU_1A 297 +#define SC_R_M4_1_PID0 298 +#define SC_R_M4_1_PID1 299 +#define SC_R_M4_1_PID2 300 +#define SC_R_M4_1_PID3 301 +#define SC_R_M4_1_PID4 302 +#define SC_R_M4_1_RGPIO 303 +#define SC_R_M4_1_SEMA42 304 +#define SC_R_M4_1_TPM 305 +#define SC_R_M4_1_PIT 306 +#define SC_R_M4_1_UART 307 +#define SC_R_M4_1_I2C 308 +#define SC_R_M4_1_INTMUX 309 +#define SC_R_M4_1_SIM 310 +#define SC_R_M4_1_WDOG 311 +#define SC_R_M4_1_MU_0B 312 +#define SC_R_M4_1_MU_0A0 313 +#define SC_R_M4_1_MU_0A1 314 +#define SC_R_M4_1_MU_0A2 315 +#define SC_R_M4_1_MU_0A3 316 +#define SC_R_M4_1_MU_1A 317 +#define SC_R_SAI_0 318 +#define SC_R_SAI_1 319 +#define SC_R_SAI_2 320 +#define SC_R_IRQSTR_SCU2 321 +#define SC_R_IRQSTR_DSP 322 +#define SC_R_UNUSED5 323 +#define SC_R_OCRAM 324 +#define SC_R_AUDIO_PLL_0 325 +#define SC_R_PI_0 326 +#define SC_R_PI_0_PWM_0 327 +#define SC_R_PI_0_PWM_1 328 +#define SC_R_PI_0_I2C_0 329 +#define SC_R_PI_0_PLL 330 +#define SC_R_PI_1 331 +#define SC_R_PI_1_PWM_0 332 +#define SC_R_PI_1_PWM_1 333 +#define SC_R_PI_1_I2C_0 334 +#define SC_R_PI_1_PLL 335 +#define SC_R_SC_PID0 336 +#define SC_R_SC_PID1 337 +#define SC_R_SC_PID2 338 +#define SC_R_SC_PID3 339 +#define SC_R_SC_PID4 340 +#define SC_R_SC_SEMA42 341 +#define SC_R_SC_TPM 342 +#define SC_R_SC_PIT 343 +#define SC_R_SC_UART 344 +#define SC_R_SC_I2C 345 +#define SC_R_SC_MU_0B 346 +#define SC_R_SC_MU_0A0 347 +#define SC_R_SC_MU_0A1 348 +#define SC_R_SC_MU_0A2 349 +#define SC_R_SC_MU_0A3 350 +#define SC_R_SC_MU_1A 351 +#define SC_R_SYSCNT_RD 352 +#define SC_R_SYSCNT_CMP 353 +#define SC_R_DEBUG 354 +#define SC_R_SYSTEM 355 +#define SC_R_SNVS 356 +#define SC_R_OTP 357 +#define SC_R_VPU_PID0 358 +#define SC_R_VPU_PID1 359 +#define SC_R_VPU_PID2 360 +#define SC_R_VPU_PID3 361 +#define SC_R_VPU_PID4 362 +#define SC_R_VPU_PID5 363 +#define SC_R_VPU_PID6 364 +#define SC_R_VPU_PID7 365 +#define SC_R_VPU_UART 366 +#define SC_R_VPUCORE 367 +#define SC_R_VPUCORE_0 368 +#define SC_R_VPUCORE_1 369 +#define SC_R_VPUCORE_2 370 +#define SC_R_VPUCORE_3 371 +#define SC_R_DMA_4_CH0 372 +#define SC_R_DMA_4_CH1 373 +#define SC_R_DMA_4_CH2 374 +#define SC_R_DMA_4_CH3 375 +#define SC_R_DMA_4_CH4 376 +#define SC_R_ISI_CH0 377 +#define SC_R_ISI_CH1 378 +#define SC_R_ISI_CH2 379 +#define SC_R_ISI_CH3 380 +#define SC_R_ISI_CH4 381 +#define SC_R_ISI_CH5 382 +#define SC_R_ISI_CH6 383 +#define SC_R_ISI_CH7 384 +#define SC_R_MJPEG_DEC_S0 385 +#define SC_R_MJPEG_DEC_S1 386 +#define SC_R_MJPEG_DEC_S2 387 +#define SC_R_MJPEG_DEC_S3 388 +#define SC_R_MJPEG_ENC_S0 389 +#define SC_R_MJPEG_ENC_S1 390 +#define SC_R_MJPEG_ENC_S2 391 +#define SC_R_MJPEG_ENC_S3 392 +#define SC_R_MIPI_0 393 +#define SC_R_MIPI_0_PWM_0 394 +#define SC_R_MIPI_0_I2C_0 395 +#define SC_R_MIPI_0_I2C_1 396 +#define SC_R_MIPI_1 397 +#define SC_R_MIPI_1_PWM_0 398 +#define SC_R_MIPI_1_I2C_0 399 +#define SC_R_MIPI_1_I2C_1 400 +#define SC_R_CSI_0 401 +#define SC_R_CSI_0_PWM_0 402 +#define SC_R_CSI_0_I2C_0 403 +#define SC_R_CSI_1 404 +#define SC_R_CSI_1_PWM_0 405 +#define SC_R_CSI_1_I2C_0 406 +#define SC_R_HDMI 407 +#define SC_R_HDMI_I2S 408 +#define SC_R_HDMI_I2C_0 409 +#define SC_R_HDMI_PLL_0 410 +#define SC_R_HDMI_RX 411 +#define SC_R_HDMI_RX_BYPASS 412 +#define SC_R_HDMI_RX_I2C_0 413 +#define SC_R_ASRC_0 414 +#define SC_R_ESAI_0 415 +#define SC_R_SPDIF_0 416 +#define SC_R_SPDIF_1 417 +#define SC_R_SAI_3 418 +#define SC_R_SAI_4 419 +#define SC_R_SAI_5 420 +#define SC_R_GPT_5 421 +#define SC_R_GPT_6 422 +#define SC_R_GPT_7 423 +#define SC_R_GPT_8 424 +#define SC_R_GPT_9 425 +#define SC_R_GPT_10 426 +#define SC_R_DMA_2_CH5 427 +#define SC_R_DMA_2_CH6 428 +#define SC_R_DMA_2_CH7 429 +#define SC_R_DMA_2_CH8 430 +#define SC_R_DMA_2_CH9 431 +#define SC_R_DMA_2_CH10 432 +#define SC_R_DMA_2_CH11 433 +#define SC_R_DMA_2_CH12 434 +#define SC_R_DMA_2_CH13 435 +#define SC_R_DMA_2_CH14 436 +#define SC_R_DMA_2_CH15 437 +#define SC_R_DMA_2_CH16 438 +#define SC_R_DMA_2_CH17 439 +#define SC_R_DMA_2_CH18 440 +#define SC_R_DMA_2_CH19 441 +#define SC_R_DMA_2_CH20 442 +#define SC_R_DMA_2_CH21 443 +#define SC_R_DMA_2_CH22 444 +#define SC_R_DMA_2_CH23 445 +#define SC_R_DMA_2_CH24 446 +#define SC_R_DMA_2_CH25 447 +#define SC_R_DMA_2_CH26 448 +#define SC_R_DMA_2_CH27 449 +#define SC_R_DMA_2_CH28 450 +#define SC_R_DMA_2_CH29 451 +#define SC_R_DMA_2_CH30 452 +#define SC_R_DMA_2_CH31 453 +#define SC_R_ASRC_1 454 +#define SC_R_ESAI_1 455 +#define SC_R_SAI_6 456 +#define SC_R_SAI_7 457 +#define SC_R_AMIX 458 +#define SC_R_MQS_0 459 +#define SC_R_DMA_3_CH0 460 +#define SC_R_DMA_3_CH1 461 +#define SC_R_DMA_3_CH2 462 +#define SC_R_DMA_3_CH3 463 +#define SC_R_DMA_3_CH4 464 +#define SC_R_DMA_3_CH5 465 +#define SC_R_DMA_3_CH6 466 +#define SC_R_DMA_3_CH7 467 +#define SC_R_DMA_3_CH8 468 +#define SC_R_DMA_3_CH9 469 +#define SC_R_DMA_3_CH10 470 +#define SC_R_DMA_3_CH11 471 +#define SC_R_DMA_3_CH12 472 +#define SC_R_DMA_3_CH13 473 +#define SC_R_DMA_3_CH14 474 +#define SC_R_DMA_3_CH15 475 +#define SC_R_DMA_3_CH16 476 +#define SC_R_DMA_3_CH17 477 +#define SC_R_DMA_3_CH18 478 +#define SC_R_DMA_3_CH19 479 +#define SC_R_DMA_3_CH20 480 +#define SC_R_DMA_3_CH21 481 +#define SC_R_DMA_3_CH22 482 +#define SC_R_DMA_3_CH23 483 +#define SC_R_DMA_3_CH24 484 +#define SC_R_DMA_3_CH25 485 +#define SC_R_DMA_3_CH26 486 +#define SC_R_DMA_3_CH27 487 +#define SC_R_DMA_3_CH28 488 +#define SC_R_DMA_3_CH29 489 +#define SC_R_DMA_3_CH30 490 +#define SC_R_DMA_3_CH31 491 +#define SC_R_AUDIO_PLL_1 492 +#define SC_R_AUDIO_CLK_0 493 +#define SC_R_AUDIO_CLK_1 494 +#define SC_R_MCLK_OUT_0 495 +#define SC_R_MCLK_OUT_1 496 +#define SC_R_PMIC_0 497 +#define SC_R_PMIC_1 498 +#define SC_R_SECO 499 +#define SC_R_CAAM_JR1 500 +#define SC_R_CAAM_JR2 501 +#define SC_R_CAAM_JR3 502 +#define SC_R_SECO_MU_2 503 +#define SC_R_SECO_MU_3 504 +#define SC_R_SECO_MU_4 505 +#define SC_R_HDMI_RX_PWM_0 506 +#define SC_R_A35 507 +#define SC_R_A35_0 508 +#define SC_R_A35_1 509 +#define SC_R_A35_2 510 +#define SC_R_A35_3 511 +#define SC_R_DSP 512 +#define SC_R_DSP_RAM 513 +#define SC_R_CAAM_JR1_OUT 514 +#define SC_R_CAAM_JR2_OUT 515 +#define SC_R_CAAM_JR3_OUT 516 +#define SC_R_VPU_DEC_0 517 +#define SC_R_VPU_ENC_0 518 +#define SC_R_CAAM_JR0 519 +#define SC_R_CAAM_JR0_OUT 520 +#define SC_R_PMIC_2 521 +#define SC_R_DBLOGIC 522 +#define SC_R_HDMI_PLL_1 523 +#define SC_R_BOARD_R0 524 +#define SC_R_BOARD_R1 525 +#define SC_R_BOARD_R2 526 +#define SC_R_BOARD_R3 527 +#define SC_R_BOARD_R4 528 +#define SC_R_BOARD_R5 529 +#define SC_R_BOARD_R6 530 +#define SC_R_BOARD_R7 531 +#define SC_R_MJPEG_DEC_MP 532 +#define SC_R_MJPEG_ENC_MP 533 +#define SC_R_VPU_TS_0 534 +#define SC_R_VPU_MU_0 535 +#define SC_R_VPU_MU_1 536 +#define SC_R_VPU_MU_2 537 +#define SC_R_VPU_MU_3 538 +#define SC_R_VPU_ENC_1 539 +#define SC_R_VPU 540 +#define SC_R_LAST 541 + +#endif /* DT_BINDINGS_RSCRC_IMX_H */

From: Peng Fan peng.fan@nxp.com

Add Kconfig entry for i.MX8QXP

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/Kconfig | 8 ++++++++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/imx8/Kconfig | 13 +++++++++++++ 3 files changed, 22 insertions(+) create mode 100644 arch/arm/mach-imx/imx8/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c7168e0cc3..afc5a77a53 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -668,6 +668,12 @@ config ARCH_MESON targeted at media players and tablet computers. We currently support the S905 (GXBaby) 64-bit SoC.

+config ARCH_IMX8 + bool "NXP i.MX8 platform" + select ARM64 + select DM + select OF_CONTROL + config ARCH_MX8M bool "NXP i.MX8M platform" select ARM64 @@ -1416,6 +1422,8 @@ source "arch/arm/mach-imx/mx7/Kconfig"

source "arch/arm/mach-imx/mx7ulp/Kconfig"

+source "arch/arm/mach-imx/imx8/Kconfig" + source "arch/arm/mach-imx/mx8m/Kconfig"

source "arch/arm/mach-imx/mxs/Kconfig" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 733c308670..375789efb2 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -141,3 +141,4 @@ obj-$(CONFIG_MX6) += mx6/ obj-$(CONFIG_MX7) += mx7/ obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/ obj-$(CONFIG_MX8M) += mx8m/ +obj-$(CONFIG_ARCH_IMX8) += imx8/ diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig new file mode 100644 index 0000000000..28910c1509 --- /dev/null +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -0,0 +1,13 @@ +if ARCH_IMX8 + +config IMX8 + bool + +config IMX8QXP + select IMX8 + bool + +config SYS_SOC + default "imx8" + +endif

From: Peng Fan peng.fan@nxp.com

Add scu_dev for i.MX8, this will be used as a handle to communite with SCU from A35.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/global_data.h | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 287a7bd5b1..c3ee5f0c7b 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -74,6 +74,10 @@ struct arch_global_data { #if defined(CONFIG_FSL_LSCH3) && defined(CONFIG_SYS_FSL_HAS_DP_DDR) unsigned long mem2_clk; #endif + +#ifdef CONFIG_ARCH_IMX8 + struct udevice *scu_dev; +#endif };

#include <asm-generic/global_data.h>

From: Peng Fan peng.fan@nxp.com

Add clk/misc/pad/pm/rm scfw api implementaion for different drivers to invoke. The low level code is using misc_call to invoke imx8_scu driver.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/sci/sci.h | 30 ++ drivers/misc/imx8/Makefile | 2 +- drivers/misc/imx8/scu_api.c | 367 +++++++++++++++++++++++ 3 files changed, 398 insertions(+), 1 deletion(-) create mode 100644 drivers/misc/imx8/scu_api.c

diff --git a/arch/arm/include/asm/arch-imx8/sci/sci.h b/arch/arm/include/asm/arch-imx8/sci/sci.h index d0ff5c5c41..d1621669e2 100644 --- a/arch/arm/include/asm/arch-imx8/sci/sci.h +++ b/arch/arm/include/asm/arch-imx8/sci/sci.h @@ -55,4 +55,34 @@ static inline int sc_err_to_linux(sc_err_t err) return ret; }

+/* PM API*/ +int sc_pm_set_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource, + sc_pm_power_mode_t mode); +int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_pm_clock_rate_t *rate); +int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_pm_clock_rate_t *rate); +int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_pm_clock_rate_t *rate); +int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_pm_clock_rate_t *rate); +int sc_pm_clock_enable(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_bool_t enable, sc_bool_t autog); + +/* MISC API */ +int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl, + u32 *val); +void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev); +void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status); +void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit); +int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val); + +/* RM API */ +sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr); +int sc_rm_get_memreg_info(sc_ipc_t ipc, sc_rm_mr_t mr, sc_faddr_t *addr_start, + sc_faddr_t *addr_end); +sc_bool_t sc_rm_is_resource_owned(sc_ipc_t ipc, sc_rsrc_t resource); + +/* PAD API */ +int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val); #endif diff --git a/drivers/misc/imx8/Makefile b/drivers/misc/imx8/Makefile index 3395340d22..ee05893cbb 100644 --- a/drivers/misc/imx8/Makefile +++ b/drivers/misc/imx8/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0+

-obj-y += scu.o +obj-y += scu_api.o scu.o diff --git a/drivers/misc/imx8/scu_api.c b/drivers/misc/imx8/scu_api.c new file mode 100644 index 0000000000..65080d7544 --- /dev/null +++ b/drivers/misc/imx8/scu_api.c @@ -0,0 +1,367 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2018 NXP + * + * Peng Fan peng.fan@nxp.com + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <asm/arch/sci/sci.h> +#include <misc.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* CLK and PM */ +int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_pm_clock_rate_t *rate) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_PM; + RPC_FUNC(&msg) = (u8)PM_FUNC_SET_CLOCK_RATE; + RPC_U32(&msg, 0U) = *(u32 *)rate; + RPC_U16(&msg, 4U) = (u16)resource; + RPC_U8(&msg, 6U) = (u8)clk; + RPC_SIZE(&msg) = 3U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: rate:%u resource:%u: clk:%u res:%d\n", + __func__, *rate, resource, clk, RPC_R8(&msg)); + + *rate = RPC_U32(&msg, 0U); + + return ret; +} + +int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_pm_clock_rate_t *rate) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_PM; + RPC_FUNC(&msg) = (u8)PM_FUNC_GET_CLOCK_RATE; + RPC_U16(&msg, 0U) = (u16)resource; + RPC_U8(&msg, 2U) = (u8)clk; + RPC_SIZE(&msg) = 2U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) { + printf("%s: resource:%d clk:%d: res:%d\n", + __func__, resource, clk, RPC_R8(&msg)); + return ret; + } + + if (rate) + *rate = RPC_U32(&msg, 0U); + + return 0; +} + +int sc_pm_clock_enable(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, + sc_bool_t enable, sc_bool_t autog) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_PM; + RPC_FUNC(&msg) = (u8)PM_FUNC_CLOCK_ENABLE; + RPC_U16(&msg, 0U) = (u16)resource; + RPC_U8(&msg, 2U) = (u8)clk; + RPC_U8(&msg, 3U) = (u8)enable; + RPC_U8(&msg, 4U) = (u8)autog; + RPC_SIZE(&msg) = 3U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: resource:%d clk:%d: enable:%d autog: %d, res:%d\n", + __func__, resource, clk, enable, autog, RPC_R8(&msg)); + + return ret; +} + +int sc_pm_set_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource, + sc_pm_power_mode_t mode) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_PM; + RPC_FUNC(&msg) = (u8)PM_FUNC_SET_RESOURCE_POWER_MODE; + RPC_U16(&msg, 0U) = (u16)resource; + RPC_U8(&msg, 2U) = (u8)mode; + RPC_SIZE(&msg) = 2U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: resource:%d mode:%d: res:%d\n", + __func__, resource, mode, RPC_R8(&msg)); + + return ret; +} + +/* PAD */ +int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_PAD; + RPC_FUNC(&msg) = (u8)PAD_FUNC_SET; + RPC_U32(&msg, 0U) = (u32)val; + RPC_U16(&msg, 4U) = (u16)pad; + RPC_SIZE(&msg) = 3U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: val:%d pad:%d: res:%d\n", + __func__, val, pad, RPC_R8(&msg)); + + return ret; +} + +/* MISC */ +int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl, + u32 *val) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_MISC; + RPC_FUNC(&msg) = (u8)MISC_FUNC_GET_CONTROL; + RPC_U32(&msg, 0U) = (u32)ctrl; + RPC_U16(&msg, 4U) = (u16)resource; + RPC_SIZE(&msg) = 3U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: ctrl:%d resource:%d: res:%d\n", + __func__, ctrl, resource, RPC_R8(&msg)); + + if (!val) + *val = RPC_U32(&msg, 0U); + + return ret; +} + +void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_MISC; + RPC_FUNC(&msg) = (u8)MISC_FUNC_GET_BOOT_DEV; + RPC_SIZE(&msg) = 1U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: res:%d\n", __func__, RPC_R8(&msg)); + + if (!boot_dev) + *boot_dev = RPC_U16(&msg, 0U); +} + +void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_MISC; + RPC_FUNC(&msg) = (u8)MISC_FUNC_BOOT_STATUS; + RPC_U8(&msg, 0U) = (u8)status; + RPC_SIZE(&msg) = 2U; + + ret = misc_call(dev, SC_TRUE, &msg, size, &msg, size); + if (ret) + printf("%s: status:%d res:%d\n", + __func__, status, RPC_R8(&msg)); +} + +void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = SC_RPC_SVC_MISC; + RPC_FUNC(&msg) = MISC_FUNC_BUILD_INFO; + RPC_SIZE(&msg) = 1; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret < 0) { + printf("%s: err: %d\n", __func__, ret); + return; + } + + if (build) + *build = RPC_U32(&msg, 0); + if (commit) + *commit = RPC_U32(&msg, 4); +} + +int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = SC_RPC_SVC_MISC; + RPC_FUNC(&msg) = MISC_FUNC_OTP_FUSE_READ; + RPC_U32(&msg, 0) = word; + RPC_SIZE(&msg) = 2; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret < 0) + return ret; + + if (val) + *val = RPC_U32(&msg, 0U); + + return 0; +} + +/* RM */ +sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + sc_err_t result; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM; + RPC_FUNC(&msg) = (u8)RM_FUNC_IS_MEMREG_OWNED; + RPC_U8(&msg, 0U) = (u8)mr; + RPC_SIZE(&msg) = 2U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + result = RPC_R8(&msg); + + if (result != 0 && result != 1) { + printf("%s: mr:%d res:%d\n", __func__, mr, RPC_R8(&msg)); + if (ret) + printf("%s: mr:%d res:%d\n", __func__, mr, + RPC_R8(&msg)); + } + + return (sc_bool_t)result; +} + +int sc_rm_get_memreg_info(sc_ipc_t ipc, sc_rm_mr_t mr, sc_faddr_t *addr_start, + sc_faddr_t *addr_end) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM; + RPC_FUNC(&msg) = (u8)RM_FUNC_GET_MEMREG_INFO; + RPC_U8(&msg, 0U) = (u8)mr; + RPC_SIZE(&msg) = 2U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: mr:%d res:%d\n", __func__, mr, RPC_R8(&msg)); + + if (addr_start) + *addr_start = ((u64)RPC_U32(&msg, 0U) << 32U) | + RPC_U32(&msg, 4U); + + if (addr_end) + *addr_end = ((u64)RPC_U32(&msg, 8U) << 32U) | + RPC_U32(&msg, 12U); + + return ret; +} + +sc_bool_t sc_rm_is_resource_owned(sc_ipc_t ipc, sc_rsrc_t resource) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + u8 result; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM; + RPC_FUNC(&msg) = (u8)RM_FUNC_IS_RESOURCE_OWNED; + RPC_U16(&msg, 0U) = (u16)resource; + RPC_SIZE(&msg) = 2U; + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + result = RPC_R8(&msg); + if (result != 0 && result != 1) { + printf("%s: resource:%d res:%d\n", + __func__, resource, RPC_R8(&msg)); + if (ret) + printf("%s: res:%d res:%d\n", __func__, resource, + RPC_R8(&msg)); + } + + return !!result; +}

From: Peng Fan peng.fan@nxp.com

Add imx-regs header file to include the register base definition

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/imx-regs.h | 46 +++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 arch/arm/include/asm/arch-imx8/imx-regs.h

diff --git a/arch/arm/include/asm/arch-imx8/imx-regs.h b/arch/arm/include/asm/arch-imx8/imx-regs.h new file mode 100644 index 0000000000..af0fb5154b --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/imx-regs.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __ASM_ARCH_IMX8_REGS_H__ +#define __ASM_ARCH_IMX8_REGS_H__ + +#define LPUART_BASE 0x5A060000 + +#define GPT1_BASE_ADDR 0x5D140000 +#define SCU_LPUART_BASE 0x33220000 +#define GPIO1_BASE_ADDR 0x5D080000 +#define GPIO2_BASE_ADDR 0x5D090000 +#define GPIO3_BASE_ADDR 0x5D0A0000 +#define GPIO4_BASE_ADDR 0x5D0B0000 +#define GPIO5_BASE_ADDR 0x5D0C0000 +#define GPIO6_BASE_ADDR 0x5D0D0000 +#define GPIO7_BASE_ADDR 0x5D0E0000 +#define GPIO8_BASE_ADDR 0x5D0F0000 +#define LPI2C1_BASE_ADDR 0x5A800000 +#define LPI2C2_BASE_ADDR 0x5A810000 +#define LPI2C3_BASE_ADDR 0x5A820000 +#define LPI2C4_BASE_ADDR 0x5A830000 +#define LPI2C5_BASE_ADDR 0x5A840000 + +#ifdef CONFIG_IMX8QXP +#define LVDS0_PHYCTRL_BASE 0x56221000 +#define LVDS1_PHYCTRL_BASE 0x56241000 +#define MIPI0_SS_BASE 0x56220000 +#define MIPI1_SS_BASE 0x56240000 +#endif + +#define APBH_DMA_ARB_BASE_ADDR 0x5B810000 +#define APBH_DMA_ARB_END_ADDR 0x5B81FFFF +#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR + +#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) +#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) + +#define PASS_OVER_INFO_ADDR 0x0010fe00 + +#define USB_BASE_ADDR 0x5b0d0000 +#define USB_PHY0_BASE_ADDR 0x5b100000 + +#endif /* __ASM_ARCH_IMX8_REGS_H__ */

From: Peng Fan peng.fan@nxp.com

Add i.MX8 cpu type and is_imx8/is_imx8qxp help macros.

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx/cpu.h | 5 +++++ arch/arm/include/asm/mach-imx/sys_proto.h | 3 +++ 2 files changed, 8 insertions(+)

diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 62df1b9ad2..cf6303c3f5 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -25,12 +25,14 @@ #define MXC_CPU_MX7S 0x71 /* dummy ID */ #define MXC_CPU_MX7D 0x72 #define MXC_CPU_MX8MQ 0x82 +#define MXC_CPU_IMX8QXP 0x92 /* dummy ID */ #define MXC_CPU_MX7ULP 0xE1 /* Temporally hard code */ #define MXC_CPU_VF610 0xF6 /* dummy ID */

#define MXC_SOC_MX6 0x60 #define MXC_SOC_MX7 0x70 #define MXC_SOC_MX8M 0x80 +#define MXC_SOC_IMX8 0x90 /* dummy */ #define MXC_SOC_MX7ULP 0xE0 /* dummy */

#define CHIP_REV_1_0 0x10 @@ -41,6 +43,9 @@ #define CHIP_REV_2_5 0x25 #define CHIP_REV_3_0 0x30

+#define CHIP_REV_A 0x0 +#define CHIP_REV_B 0x1 + #define BOARD_REV_1_0 0x0 #define BOARD_REV_2_0 0x1 #define BOARD_VER_OFFSET 0x8 diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index d1d6cbc462..f8890b57da 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -27,6 +27,7 @@ #define is_mx6() (is_soc_type(MXC_SOC_MX6)) #define is_mx7() (is_soc_type(MXC_SOC_MX7)) #define is_mx8m() (is_soc_type(MXC_SOC_MX8M)) +#define is_imx8() (is_soc_type(MXC_SOC_IMX8))

#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)) #define is_mx6dq() (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) @@ -41,6 +42,8 @@

#define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP))

+#define is_imx8qxp() (is_cpu_type(MXC_CPU_IMX8QXP)) + #ifdef CONFIG_MX6 #define IMX6_SRC_GPR10_BMODE BIT(28)

From: Peng Fan peng.fan@nxp.com

Add basic cpu support, including cpu revision, cpu type, cpu core detection.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/mach-imx/imx8/Makefile | 7 +++ arch/arm/mach-imx/imx8/cpu.c | 93 +++++++++++++++++++++++++++++++++ 2 files changed, 100 insertions(+) create mode 100644 arch/arm/mach-imx/imx8/Makefile create mode 100644 arch/arm/mach-imx/imx8/cpu.c

diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile new file mode 100644 index 0000000000..57876139a1 --- /dev/null +++ b/arch/arm/mach-imx/imx8/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cpu.o diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c new file mode 100644 index 0000000000..0b841e291d --- /dev/null +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/lists.h> +#include <dm/uclass.h> +#include <errno.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch-imx/cpu.h> +#include <asm/armv8/cpu.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 get_cpu_rev(void) +{ + u32 id = 0, rev = 0; + int ret; + + ret = sc_misc_get_control(-1, SC_R_SYSTEM, SC_C_ID, &id); + if (ret) + return 0; + + rev = (id >> 5) & 0xf; + id = (id & 0x1f) + MXC_SOC_IMX8; /* Dummy ID for chip */ + + return (id << 12) | rev; +} + +#ifdef CONFIG_DISPLAY_CPUINFO +const char *get_imx8_type(u32 imxtype) +{ + switch (imxtype) { + case MXC_CPU_IMX8QXP: + return "8QXP"; + default: + return "??"; + } +} + +const char *get_imx8_rev(u32 rev) +{ + switch (rev) { + case CHIP_REV_A: + return "A"; + case CHIP_REV_B: + return "B"; + default: + return "?"; + } +} + +const char *get_core_name(void) +{ + if (is_cortex_a35()) + return "A35"; + else + return "?"; +} + +int print_cpuinfo(void) +{ + struct udevice *dev; + struct clk cpu_clk; + int ret; + + ret = uclass_get_device(UCLASS_CPU, 0, &dev); + if (ret) + return 0; + + ret = clk_get_by_index(dev, 0, &cpu_clk); + if (ret) { + dev_err(dev, "failed to clk\n"); + return 0; + } + + u32 cpurev; + + cpurev = get_cpu_rev(); + + printf("CPU: Freescale i.MX%s rev%s %s at %ld MHz\n", + get_imx8_type((cpurev & 0xFF000) >> 12), + get_imx8_rev((cpurev & 0xFFF)), + get_core_name(), + clk_get_rate(&cpu_clk) / 1000000); + + return 0; +} +#endif

From: Peng Fan peng.fan@nxp.com

Implement mmc_get_env_dev for i.MX8.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/mach-imx/imx8/cpu.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)

diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 90b6ea4211..0cacaa895c 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -176,3 +176,35 @@ enum boot_device get_boot_device(void)

return boot_dev; } + +#ifdef CONFIG_ENV_IS_IN_MMC +__weak int board_mmc_get_env_dev(int devno) +{ + return CONFIG_SYS_MMC_ENV_DEV; +} + +int mmc_get_env_dev(void) +{ + sc_rsrc_t dev_rsrc; + int devno; + + sc_misc_get_boot_dev(-1, &dev_rsrc); + + switch (dev_rsrc) { + case SC_R_SDHC_0: + devno = 0; + break; + case SC_R_SDHC_1: + devno = 1; + break; + case SC_R_SDHC_2: + devno = 2; + break; + default: + /* If not boot from sd/mmc, use default value */ + return CONFIG_SYS_MMC_ENV_DEV; + } + + return board_mmc_get_env_dev(devno); +} +#endif

From: Peng Fan peng.fan@nxp.com

Add arch_cpu_init(_dm) mainly to open the channel between ACore and SCU.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/sys_proto.h | 9 ++++ arch/arm/mach-imx/imx8/cpu.c | 53 +++++++++++++++++++++- 2 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h b/arch/arm/include/asm/arch-imx8/sys_proto.h index f9a3016132..73ffaba7d5 100644 --- a/arch/arm/include/asm/arch-imx8/sys_proto.h +++ b/arch/arm/include/asm/arch-imx8/sys_proto.h @@ -6,5 +6,14 @@ #include <asm/mach-imx/sys_proto.h> #include <linux/types.h>

+struct pass_over_info_t { + u16 barker; + u16 len; + u32 g_bt_cfg_shadow; + u32 card_address_mode; + u32 bad_block_count_met; + u32 g_ap_mu; +}; + enum boot_device get_boot_device(void); int print_bootinfo(void); diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index f73ce2fde3..d80b4b175d 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -95,6 +95,57 @@ int print_cpuinfo(void) } #endif

+#define BT_PASSOVER_TAG 0x504F +struct pass_over_info_t *get_pass_over_info(void) +{ + struct pass_over_info_t *p = + (struct pass_over_info_t *)PASS_OVER_INFO_ADDR; + + if (p->barker != BT_PASSOVER_TAG || + p->len != sizeof(struct pass_over_info_t)) + return NULL; + + return p; +} + +int arch_cpu_init(void) +{ + struct pass_over_info_t *pass_over = get_pass_over_info(); + + if (pass_over && pass_over->g_ap_mu == 0) { + /* + * When ap_mu is 0, means the U-Boot booted + * from first container + */ + sc_misc_boot_status(-1, SC_MISC_BOOT_STATUS_SUCCESS); + } + + return 0; +} + +int arch_cpu_init_dm(void) +{ + struct udevice *devp; + int node, ret; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "fsl,imx8-mu"); + ret = device_bind_driver_to_node(gd->dm_root, "imx8_scu", "imx8_scu", + offset_to_ofnode(node), &devp); + + if (ret) { + printf("could not find scu %d\n", ret); + return ret; + } + + ret = device_probe(devp); + if (ret) { + printf("scu probe failed %d\n", ret); + return ret; + } + + return 0; +} + int print_bootinfo(void) { enum boot_device bt_dev = get_boot_device(); @@ -252,7 +303,7 @@ phys_size_t get_effective_memsize(void) if (start > end) continue;

- /* Find the memory region runs the u-boot */ + /* Find the memory region runs the U-Boot */ if (start >= PHYS_SDRAM_1 && start <= end1 && (start <= CONFIG_SYS_TEXT_BASE && end >= CONFIG_SYS_TEXT_BASE)) {

From: Peng Fan peng.fan@nxp.com

This driver is mostly used to avoid build errors. We use uclass clk driver for clk related operations.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/clock.h | 27 ++++++++++++++++++++++++++ arch/arm/mach-imx/imx8/clock.c | 21 ++++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm/include/asm/arch-imx8/clock.h create mode 100644 arch/arm/mach-imx/imx8/clock.c

diff --git a/arch/arm/include/asm/arch-imx8/clock.h b/arch/arm/include/asm/arch-imx8/clock.h new file mode 100644 index 0000000000..bea157171f --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/clock.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __ASM_ARCH_IMX8_CLOCK_H__ +#define __ASM_ARCH_IMX8_CLOCK_H__ + +/* Mainly for compatible to imx common code. */ +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_AHB_CLK, + MXC_IPG_CLK, + MXC_UART_CLK, + MXC_CSPI_CLK, + MXC_AXI_CLK, + MXC_DDR_CLK, + MXC_ESDHC_CLK, + MXC_ESDHC2_CLK, + MXC_ESDHC3_CLK, + MXC_I2C_CLK, + MXC_FEC_CLK, +}; + +u32 mxc_get_clock(enum mxc_clock clk); + +#endif /* __ASM_ARCH_IMX8_CLOCK_H__ */ diff --git a/arch/arm/mach-imx/imx8/clock.c b/arch/arm/mach-imx/imx8/clock.c new file mode 100644 index 0000000000..d747e1332f --- /dev/null +++ b/arch/arm/mach-imx/imx8/clock.c @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <linux/errno.h> +#include <asm/arch/clock.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + default: + printf("Unsupported mxc_clock %d\n", clk); + break; + } + + return 0; +}

From: Peng Fan peng.fan@nxp.com

Add pinctrl driver for i.MX8. The pads configuration is controlled by SCU, so need to ask SCU to configure pads through scfw API. Add pinctrl-scu to invoke sc_pad_set to configure pads. Add a new flag IMX8_USE_SCU to differentiate i.MX8 from other platforms which could directly configure pads from Acore side. Add CONFIG_PINCTRL_IMX8 as the built gate.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- drivers/pinctrl/nxp/Kconfig | 18 +++ drivers/pinctrl/nxp/Makefile | 2 + drivers/pinctrl/nxp/pinctrl-imx.c | 209 ++++++++++++++++------------- drivers/pinctrl/nxp/pinctrl-imx.h | 16 +++ drivers/pinctrl/nxp/pinctrl-imx8.c | 40 ++++++ drivers/pinctrl/nxp/pinctrl-scu.c | 66 +++++++++ 6 files changed, 258 insertions(+), 93 deletions(-) create mode 100644 drivers/pinctrl/nxp/pinctrl-imx8.c create mode 100644 drivers/pinctrl/nxp/pinctrl-scu.c

diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig index b668359a0b..799d1d2465 100644 --- a/drivers/pinctrl/nxp/Kconfig +++ b/drivers/pinctrl/nxp/Kconfig @@ -1,6 +1,9 @@ config PINCTRL_IMX bool

+config PINCTRL_IMX_SCU + bool + config PINCTRL_IMX5 bool "IMX5 pinctrl driver" depends on ARCH_MX5 && PINCTRL_FULL @@ -56,3 +59,18 @@ config PINCTRL_IMX7ULP is different from the linux one, this is a simple implementation, only parses the 'fsl,pins' property and configure related registers. + +config PINCTRL_IMX8 + bool "IMX8 pinctrl driver" + depends on ARCH_IMX8 && PINCTRL_FULL + select DEVRES + select PINCTRL_IMX + select PINCTRL_IMX_SCU + help + Say Y here to enable the imx8 pinctrl driver + + This provides a simple pinctrl driver for i.MX8 SoC familiy. + This feature depends on device tree configuration. This driver + is different from the linux one, this is a simple implementation, + only parses the 'fsl,pins' property and configures related + registers. diff --git a/drivers/pinctrl/nxp/Makefile b/drivers/pinctrl/nxp/Makefile index c763948376..310b3b3a2e 100644 --- a/drivers/pinctrl/nxp/Makefile +++ b/drivers/pinctrl/nxp/Makefile @@ -3,3 +3,5 @@ obj-$(CONFIG_PINCTRL_IMX5) += pinctrl-imx5.o obj-$(CONFIG_PINCTRL_IMX6) += pinctrl-imx6.o obj-$(CONFIG_PINCTRL_IMX7) += pinctrl-imx7.o obj-$(CONFIG_PINCTRL_IMX7ULP) += pinctrl-imx7ulp.o +obj-$(CONFIG_PINCTRL_IMX_SCU) += pinctrl-scu.o +obj-$(CONFIG_PINCTRL_IMX8) += pinctrl-imx8.o diff --git a/drivers/pinctrl/nxp/pinctrl-imx.c b/drivers/pinctrl/nxp/pinctrl-imx.c index 36e1e8983c..04ea82aba5 100644 --- a/drivers/pinctrl/nxp/pinctrl-imx.c +++ b/drivers/pinctrl/nxp/pinctrl-imx.c @@ -28,7 +28,9 @@ static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)

dev_dbg(dev, "%s: %s\n", __func__, config->name);

- if (info->flags & SHARE_MUX_CONF_REG) + if (info->flags & IMX8_USE_SCU) + pin_size = SHARE_IMX8_PIN_SIZE; + else if (info->flags & SHARE_MUX_CONF_REG) pin_size = SHARE_FSL_PIN_SIZE; else pin_size = FSL_PIN_SIZE; @@ -58,112 +60,127 @@ static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)

npins = size / pin_size;

- /* - * Refer to linux documentation for details: - * Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt - */ - for (i = 0; i < npins; i++) { - mux_reg = pin_data[j++]; - - if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg) - mux_reg = -1; - - if (info->flags & SHARE_MUX_CONF_REG) { - conf_reg = mux_reg; - } else { - conf_reg = pin_data[j++]; - if (!(info->flags & ZERO_OFFSET_VALID) && !conf_reg) - conf_reg = -1; - } + if (info->flags & IMX8_USE_SCU) { + imx_pinctrl_scu_conf_pins(info, pin_data, npins); + } else { + /* + * Refer to linux documentation for details: + * Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt + */ + for (i = 0; i < npins; i++) { + mux_reg = pin_data[j++];

- if ((mux_reg == -1) || (conf_reg == -1)) { - dev_err(dev, "Error mux_reg or conf_reg\n"); - devm_kfree(dev, pin_data); - return -EINVAL; - } + if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg) + mux_reg = -1;

- input_reg = pin_data[j++]; - mux_mode = pin_data[j++]; - input_val = pin_data[j++]; - config_val = pin_data[j++]; + if (info->flags & SHARE_MUX_CONF_REG) { + conf_reg = mux_reg; + } else { + conf_reg = pin_data[j++]; + if (!(info->flags & ZERO_OFFSET_VALID) && + !conf_reg) + conf_reg = -1; + }

- dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, input_reg 0x%x, " - "mux_mode 0x%x, input_val 0x%x, config_val 0x%x\n", - mux_reg, conf_reg, input_reg, mux_mode, input_val, - config_val); + if ((mux_reg == -1) || (conf_reg == -1)) { + dev_err(dev, "Error mux_reg or conf_reg\n"); + devm_kfree(dev, pin_data); + return -EINVAL; + }

- if (config_val & IMX_PAD_SION) - mux_mode |= IOMUXC_CONFIG_SION; + input_reg = pin_data[j++]; + mux_mode = pin_data[j++]; + input_val = pin_data[j++]; + config_val = pin_data[j++];

- config_val &= ~IMX_PAD_SION; + dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, " + "input_reg 0x%x, mux_mode 0x%x, " + "input_val 0x%x, config_val 0x%x\n", + mux_reg, conf_reg, input_reg, mux_mode, + input_val, config_val);

- /* Set Mux */ - if (info->flags & SHARE_MUX_CONF_REG) { - clrsetbits_le32(info->base + mux_reg, info->mux_mask, - mux_mode << mux_shift); - } else { - writel(mux_mode, info->base + mux_reg); - } + if (config_val & IMX_PAD_SION) + mux_mode |= IOMUXC_CONFIG_SION;

- dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n", mux_reg, - mux_mode); + config_val &= ~IMX_PAD_SION;

- /* - * Set select input - * - * If the select input value begins with 0xff, it's a quirky - * select input and the value should be interpreted as below. - * 31 23 15 7 0 - * | 0xff | shift | width | select | - * It's used to work around the problem that the select - * input for some pin is not implemented in the select - * input register but in some general purpose register. - * We encode the select input value, width and shift of - * the bit field into input_val cell of pin function ID - * in device tree, and then decode them here for setting - * up the select input bits in general purpose register. - */ + /* Set Mux */ + if (info->flags & SHARE_MUX_CONF_REG) { + clrsetbits_le32(info->base + mux_reg, + info->mux_mask, + mux_mode << mux_shift); + } else { + writel(mux_mode, info->base + mux_reg); + } + + dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n", + mux_reg, mux_mode);

- if (input_val >> 24 == 0xff) { - u32 val = input_val; - u8 select = val & 0xff; - u8 width = (val >> 8) & 0xff; - u8 shift = (val >> 16) & 0xff; - u32 mask = ((1 << width) - 1) << shift; - /* - * The input_reg[i] here is actually some IOMUXC general - * purpose register, not regular select input register. - */ - val = readl(info->base + input_reg); - val &= ~mask; - val |= select << shift; - writel(val, info->base + input_reg); - } else if (input_reg) { /* - * Regular select input register can never be at offset - * 0, and we only print register value for regular case. + * Set select input + * + * If the select input value begins with 0xff, + * it's a quirky select input and the value should + * be interpreted as below. + * 31 23 15 7 0 + * | 0xff | shift | width | select | + * It's used to work around the problem that the + * select input for some pin is not implemented in + * the select input register but in some general + * purpose register. We encode the select input + * value, width and shift of the bit field into + * input_val cell of pin function ID in device tree, + * and then decode them here for setting up the select + * input bits in general purpose register. */ - if (info->input_sel_base) - writel(input_val, info->input_sel_base + - input_reg); - else - writel(input_val, info->base + input_reg); - - dev_dbg(dev, "select_input: offset 0x%x val 0x%x\n", - input_reg, input_val); - }

- /* Set config */ - if (!(config_val & IMX_NO_PAD_CTL)) { - if (info->flags & SHARE_MUX_CONF_REG) { - clrsetbits_le32(info->base + conf_reg, - ~info->mux_mask, config_val); - } else { - writel(config_val, info->base + conf_reg); + if (input_val >> 24 == 0xff) { + u32 val = input_val; + u8 select = val & 0xff; + u8 width = (val >> 8) & 0xff; + u8 shift = (val >> 16) & 0xff; + u32 mask = ((1 << width) - 1) << shift; + /* + * The input_reg[i] here is actually some + * IOMUXC general purpose register, not + * regular select input register. + */ + val = readl(info->base + input_reg); + val &= ~mask; + val |= select << shift; + writel(val, info->base + input_reg); + } else if (input_reg) { + /* + * Regular select input register can never be + * at offset 0, and we only print register + * value for regular case. + */ + if (info->input_sel_base) + writel(input_val, + info->input_sel_base + + input_reg); + else + writel(input_val, + info->base + input_reg); + + dev_dbg(dev, "select_input: offset 0x%x val " + "0x%x\n", input_reg, input_val); }

- dev_dbg(dev, "write config: offset 0x%x val 0x%x\n", - conf_reg, config_val); + /* Set config */ + if (!(config_val & IMX_NO_PAD_CTL)) { + if (info->flags & SHARE_MUX_CONF_REG) { + clrsetbits_le32(info->base + conf_reg, + ~info->mux_mask, + config_val); + } else { + writel(config_val, + info->base + conf_reg); + } + + dev_dbg(dev, "write config: offset 0x%x val " + "0x%x\n", conf_reg, config_val); + } } }

@@ -193,6 +210,9 @@ int imx_pinctrl_probe(struct udevice *dev, priv->dev = dev; priv->info = info;

+ if (info->flags & IMX8_USE_SCU) + return 0; + addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg", &size);

@@ -238,6 +258,9 @@ int imx_pinctrl_remove(struct udevice *dev) struct imx_pinctrl_priv *priv = dev_get_priv(dev); struct imx_pinctrl_soc_info *info = priv->info;

+ if (info->flags & IMX8_USE_SCU) + return 0; + if (info->input_sel_base) unmap_sysmem(info->input_sel_base); if (info->base) diff --git a/drivers/pinctrl/nxp/pinctrl-imx.h b/drivers/pinctrl/nxp/pinctrl-imx.h index b0032455b7..947975ee72 100644 --- a/drivers/pinctrl/nxp/pinctrl-imx.h +++ b/drivers/pinctrl/nxp/pinctrl-imx.h @@ -40,13 +40,29 @@ extern const struct pinctrl_ops imx_pinctrl_ops; #define FSL_PIN_SIZE 24 #define SHARE_FSL_PIN_SIZE 20

+/* Each pin on imx8qm/qxp consists of 2 u32 PIN_FUNC_ID and 1 u32 CONFIG */ +#define SHARE_IMX8_PIN_SIZE 12 + #define SHARE_MUX_CONF_REG 0x1 #define ZERO_OFFSET_VALID 0x2 #define CONFIG_IBE_OBE 0x4 +#define IMX8_USE_SCU 0x8

#define IOMUXC_CONFIG_SION (0x1 << 4)

int imx_pinctrl_probe(struct udevice *dev, struct imx_pinctrl_soc_info *info);

int imx_pinctrl_remove(struct udevice *dev); + +#ifdef CONFIG_PINCTRL_IMX_SCU +int imx_pinctrl_scu_conf_pins(struct imx_pinctrl_soc_info *info, + u32 *pin_data, int npins); +#else +static inline int imx_pinctrl_scu_conf_pins(struct imx_pinctrl_soc_info *info, + u32 *pin_data, int npins) +{ + return 0; +} +#endif + #endif /* __DRIVERS_PINCTRL_IMX_H */ diff --git a/drivers/pinctrl/nxp/pinctrl-imx8.c b/drivers/pinctrl/nxp/pinctrl-imx8.c new file mode 100644 index 0000000000..0738da0ebe --- /dev/null +++ b/drivers/pinctrl/nxp/pinctrl-imx8.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-imx.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct imx_pinctrl_soc_info imx8_pinctrl_soc_info = { + .flags = IMX8_USE_SCU, +}; + +static int imx8_pinctrl_probe(struct udevice *dev) +{ + struct imx_pinctrl_soc_info *info = + (struct imx_pinctrl_soc_info *)dev_get_driver_data(dev); + + return imx_pinctrl_probe(dev, info); +} + +static const struct udevice_id imx8_pinctrl_match[] = { + { .compatible = "fsl,imx8qxp-iomuxc", .data = (ulong)&imx8_pinctrl_soc_info }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(imx8_pinctrl) = { + .name = "imx8_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(imx8_pinctrl_match), + .probe = imx8_pinctrl_probe, + .remove = imx_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv), + .ops = &imx_pinctrl_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/pinctrl/nxp/pinctrl-scu.c b/drivers/pinctrl/nxp/pinctrl-scu.c new file mode 100644 index 0000000000..aa11075e0a --- /dev/null +++ b/drivers/pinctrl/nxp/pinctrl-scu.c @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <errno.h> +#include <linux/bitops.h> +#include <asm/io.h> +#include <asm/arch/sci/sci.h> +#include <misc.h> + +#include "pinctrl-imx.h" + +#define PADRING_IFMUX_EN_SHIFT 31 +#define PADRING_IFMUX_EN_MASK BIT(31) +#define PADRING_GP_EN_SHIFT 30 +#define PADRING_GP_EN_MASK BIT(30) +#define PADRING_IFMUX_SHIFT 27 +#define PADRING_IFMUX_MASK GENMASK(29, 27) + +static int imx_pinconf_scu_set(struct imx_pinctrl_soc_info *info, u32 pad, + u32 mux, u32 val) +{ + int ret; + + /* + * Mux should be done in pmx set, but we do not have a good api + * to handle that in scfw, so config it in pad conf func + */ + + val |= PADRING_IFMUX_EN_MASK; + val |= PADRING_GP_EN_MASK; + val |= (mux << PADRING_IFMUX_SHIFT) & PADRING_IFMUX_MASK; + + ret = sc_pad_set(-1, pad, val); + if (ret) + printf("%s %d\n", __func__, ret); + + return 0; +} + +int imx_pinctrl_scu_conf_pins(struct imx_pinctrl_soc_info *info, u32 *pin_data, + int npins) +{ + int pin_id, mux, config_val; + int i, j = 0; + int ret; + + /* + * Refer to linux documentation for details: + * Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt + */ + for (i = 0; i < npins; i++) { + pin_id = pin_data[j++]; + mux = pin_data[j++]; + config_val = pin_data[j++]; + + ret = imx_pinconf_scu_set(info, pin_id, mux, config_val); + if (ret) + printf("Set pin %d, mux %d, val %d, error\n", pin_id, + mux, config_val); + } + + return 0; +}

From: Peng Fan peng.fan@nxp.com

Add clk driver for i.MX8QXP. This basic version supports clk enable/disable/get_rate/set_rate operations for I2C, ENET, SDHC0 and UART clocks.

Signed-off-by: Peng Fan peng.fan@nxp.com Signed-off-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/imx/Kconfig | 6 + drivers/clk/imx/Makefile | 5 + drivers/clk/imx/clk-imx8.c | 393 +++++++++++++++++++++++++++++++++++++ 5 files changed, 406 insertions(+) create mode 100644 drivers/clk/imx/Kconfig create mode 100644 drivers/clk/imx/Makefile create mode 100644 drivers/clk/imx/clk-imx8.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 7853a7a9d3..eadf7f8250 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -100,6 +100,7 @@ config CLK_STM32MP1

source "drivers/clk/at91/Kconfig" source "drivers/clk/exynos/Kconfig" +source "drivers/clk/imx/Kconfig" source "drivers/clk/mvebu/Kconfig" source "drivers/clk/owl/Kconfig" source "drivers/clk/renesas/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 8bc9f520c1..f87c9aec85 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -7,6 +7,7 @@

obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o clk_fixed_rate.o

+obj-y += imx/ obj-y += tegra/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-$(CONFIG_ARCH_MESON) += clk_meson.o diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig new file mode 100644 index 0000000000..a6fb58d6cf --- /dev/null +++ b/drivers/clk/imx/Kconfig @@ -0,0 +1,6 @@ +config CLK_IMX8 + bool "Clock support for i.MX8" + depends on ARCH_IMX8 + select CLK + help + This enables support clock driver for i.MX8 platforms. diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile new file mode 100644 index 0000000000..5505ae52e2 --- /dev/null +++ b/drivers/clk/imx/Makefile @@ -0,0 +1,5 @@ +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_CLK_IMX8) += clk-imx8.o diff --git a/drivers/clk/imx/clk-imx8.c b/drivers/clk/imx/clk-imx8.c new file mode 100644 index 0000000000..fcb8090d35 --- /dev/null +++ b/drivers/clk/imx/clk-imx8.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2018 NXP + * Peng Fan peng.fan@nxp.com + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/clock.h> +#include <dt-bindings/clock/imx8qxp-clock.h> +#include <dt-bindings/soc/imx_rsrc.h> +#include <misc.h> + +struct imx8_clks { + ulong id; + const char *name; +}; + +static struct imx8_clks imx8_clk_names[] = { + { IMX8QXP_A35_DIV, "A35_DIV" }, + { IMX8QXP_I2C0_CLK, "I2C0" }, + { IMX8QXP_I2C1_CLK, "I2C1" }, + { IMX8QXP_I2C2_CLK, "I2C2" }, + { IMX8QXP_I2C3_CLK, "I2C3" }, + { IMX8QXP_UART0_CLK, "UART0" }, + { IMX8QXP_UART1_CLK, "UART1" }, + { IMX8QXP_UART2_CLK, "UART2" }, + { IMX8QXP_UART3_CLK, "UART3" }, + { IMX8QXP_SDHC0_CLK, "SDHC0" }, + { IMX8QXP_SDHC1_CLK, "SDHC1" }, + { IMX8QXP_ENET0_AHB_CLK, "ENET0_AHB" }, + { IMX8QXP_ENET0_IPG_CLK, "ENET0_IPG" }, + { IMX8QXP_ENET0_REF_DIV, "ENET0_REF" }, + { IMX8QXP_ENET0_PTP_CLK, "ENET0_PTP" }, + { IMX8QXP_ENET1_AHB_CLK, "ENET1_AHB" }, + { IMX8QXP_ENET1_IPG_CLK, "ENET1_IPG" }, + { IMX8QXP_ENET1_REF_DIV, "ENET1_REF" }, + { IMX8QXP_ENET1_PTP_CLK, "ENET1_PTP" }, +}; + +static ulong imx8_clk_get_rate(struct clk *clk) +{ + sc_pm_clk_t pm_clk; + ulong rate; + u16 resource; + int ret; + + debug("%s(#%lu)\n", __func__, clk->id); + + switch (clk->id) { + case IMX8QXP_A35_DIV: + resource = SC_R_A35; + pm_clk = SC_PM_CLK_CPU; + break; + case IMX8QXP_I2C0_CLK: + resource = SC_R_I2C_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C1_CLK: + resource = SC_R_I2C_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C2_CLK: + resource = SC_R_I2C_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C3_CLK: + resource = SC_R_I2C_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC0_IPG_CLK: + case IMX8QXP_SDHC0_CLK: + case IMX8QXP_SDHC0_DIV: + resource = SC_R_SDHC_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC1_IPG_CLK: + case IMX8QXP_SDHC1_CLK: + case IMX8QXP_SDHC1_DIV: + resource = SC_R_SDHC_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART0_IPG_CLK: + case IMX8QXP_UART0_CLK: + resource = SC_R_UART_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART1_CLK: + resource = SC_R_UART_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART2_CLK: + resource = SC_R_UART_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART3_CLK: + resource = SC_R_UART_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET0_IPG_CLK: + case IMX8QXP_ENET0_AHB_CLK: + case IMX8QXP_ENET0_REF_DIV: + case IMX8QXP_ENET0_PTP_CLK: + resource = SC_R_ENET_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET1_IPG_CLK: + case IMX8QXP_ENET1_AHB_CLK: + case IMX8QXP_ENET1_REF_DIV: + case IMX8QXP_ENET1_PTP_CLK: + resource = SC_R_ENET_1; + pm_clk = SC_PM_CLK_PER; + break; + default: + if (clk->id < IMX8QXP_UART0_IPG_CLK || + clk->id >= IMX8QXP_CLK_END) { + printf("%s(Invalid clk ID #%lu)\n", + __func__, clk->id); + return -EINVAL; + } + return -ENOTSUPP; + }; + + ret = sc_pm_get_clock_rate(-1, resource, pm_clk, + (sc_pm_clock_rate_t *)&rate); + if (ret) { + printf("%s err %d\n", __func__, ret); + return ret; + } + + return rate; +} + +static ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate) +{ + sc_pm_clk_t pm_clk; + u32 new_rate = rate; + u16 resource; + int ret; + + debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); + + switch (clk->id) { + case IMX8QXP_I2C0_CLK: + resource = SC_R_I2C_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C1_CLK: + resource = SC_R_I2C_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C2_CLK: + resource = SC_R_I2C_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C3_CLK: + resource = SC_R_I2C_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART0_CLK: + resource = SC_R_UART_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART1_CLK: + resource = SC_R_UART_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART2_CLK: + resource = SC_R_UART_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART3_CLK: + resource = SC_R_UART_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC0_IPG_CLK: + case IMX8QXP_SDHC0_CLK: + case IMX8QXP_SDHC0_DIV: + resource = SC_R_SDHC_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC1_SEL: + case IMX8QXP_SDHC0_SEL: + return 0; + case IMX8QXP_SDHC1_IPG_CLK: + case IMX8QXP_SDHC1_CLK: + case IMX8QXP_SDHC1_DIV: + resource = SC_R_SDHC_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET0_IPG_CLK: + case IMX8QXP_ENET0_AHB_CLK: + case IMX8QXP_ENET0_REF_DIV: + case IMX8QXP_ENET0_PTP_CLK: + resource = SC_R_ENET_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET1_IPG_CLK: + case IMX8QXP_ENET1_AHB_CLK: + case IMX8QXP_ENET1_REF_DIV: + case IMX8QXP_ENET1_PTP_CLK: + resource = SC_R_ENET_1; + pm_clk = SC_PM_CLK_PER; + break; + default: + if (clk->id < IMX8QXP_UART0_IPG_CLK || + clk->id >= IMX8QXP_CLK_END) { + printf("%s(Invalid clk ID #%lu)\n", + __func__, clk->id); + return -EINVAL; + } + return -ENOTSUPP; + }; + + ret = sc_pm_set_clock_rate(-1, resource, pm_clk, &new_rate); + if (ret) { + printf("%s err %d\n", __func__, ret); + return ret; + } + + return new_rate; +} + +static int __imx8_clk_enable(struct clk *clk, bool enable) +{ + sc_pm_clk_t pm_clk; + u16 resource; + int ret; + + debug("%s(#%lu)\n", __func__, clk->id); + + switch (clk->id) { + case IMX8QXP_I2C0_CLK: + resource = SC_R_I2C_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C1_CLK: + resource = SC_R_I2C_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C2_CLK: + resource = SC_R_I2C_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C3_CLK: + resource = SC_R_I2C_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART0_CLK: + resource = SC_R_UART_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART1_CLK: + resource = SC_R_UART_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART2_CLK: + resource = SC_R_UART_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART3_CLK: + resource = SC_R_UART_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC0_IPG_CLK: + case IMX8QXP_SDHC0_CLK: + case IMX8QXP_SDHC0_DIV: + resource = SC_R_SDHC_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC1_IPG_CLK: + case IMX8QXP_SDHC1_CLK: + case IMX8QXP_SDHC1_DIV: + resource = SC_R_SDHC_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET0_IPG_CLK: + case IMX8QXP_ENET0_AHB_CLK: + case IMX8QXP_ENET0_REF_DIV: + case IMX8QXP_ENET0_PTP_CLK: + resource = SC_R_ENET_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET1_IPG_CLK: + case IMX8QXP_ENET1_AHB_CLK: + case IMX8QXP_ENET1_REF_DIV: + case IMX8QXP_ENET1_PTP_CLK: + resource = SC_R_ENET_1; + pm_clk = SC_PM_CLK_PER; + break; + default: + if (clk->id < IMX8QXP_UART0_IPG_CLK || + clk->id >= IMX8QXP_CLK_END) { + printf("%s(Invalid clk ID #%lu)\n", + __func__, clk->id); + return -EINVAL; + } + return -ENOTSUPP; + } + + ret = sc_pm_clock_enable(-1, resource, pm_clk, enable, 0); + if (ret) { + printf("%s err %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static int imx8_clk_disable(struct clk *clk) +{ + return __imx8_clk_enable(clk, 0); +} + +static int imx8_clk_enable(struct clk *clk) +{ + return __imx8_clk_enable(clk, 1); +} + +#if CONFIG_IS_ENABLED(CMD_CLK) +int soc_clk_dump(void) +{ + struct udevice *dev; + struct clk clk; + unsigned long rate; + int i, ret; + + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(imx8_clk), &dev); + if (ret) + return ret; + + printf("Clk\t\tHz\n"); + + for (i = 0; i < ARRAY_SIZE(imx8_clk_names); i++) { + clk.id = imx8_clk_names[i].id; + ret = clk_request(dev, &clk); + if (ret < 0) { + debug("%s clk_request() failed: %d\n", __func__, ret); + continue; + } + + ret = clk_get_rate(&clk); + rate = ret; + + clk_free(&clk); + + if (ret == -ENOTSUPP) { + printf("clk ID %lu not supported yet\n", + imx8_clk_names[i].id); + continue; + } + if (ret < 0) { + printf("%s %lu: get_rate err: %d\n", + __func__, imx8_clk_names[i].id, ret); + continue; + } + + printf("%s(%3lu):\t%lu\n", + imx8_clk_names[i].name, imx8_clk_names[i].id, rate); + } + + return 0; +} +#endif + +static struct clk_ops imx8_clk_ops = { + .set_rate = imx8_clk_set_rate, + .get_rate = imx8_clk_get_rate, + .enable = imx8_clk_enable, + .disable = imx8_clk_disable, +}; + +static int imx8_clk_probe(struct udevice *dev) +{ + return 0; +} + +static const struct udevice_id imx8_clk_ids[] = { + { .compatible = "fsl,imx8qxp-clk" }, + { }, +}; + +U_BOOT_DRIVER(imx8_clk) = { + .name = "clk_imx8", + .id = UCLASS_CLK, + .of_match = imx8_clk_ids, + .ops = &imx8_clk_ops, + .probe = imx8_clk_probe, + .flags = DM_FLAG_PRE_RELOC, +};

From: Ye Li ye.li@nxp.com

Enable the RX and TX FIFO in LPUART driver to avoid the input lost during U-Boot boot up.

Signed-off-by: Ye Li ye.li@nxp.com Acked-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- drivers/serial/serial_lpuart.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index c14a8105c9..b28f7cf68d 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -40,6 +40,12 @@ #define CTRL_TE (1 << 19) #define CTRL_RE (1 << 18)

+#define FIFO_RXFLUSH BIT(14) +#define FIFO_TXFLUSH BIT(15) +#define FIFO_TXSIZE_MASK 0x70 +#define FIFO_TXSIZE_OFF 4 +#define FIFO_RXSIZE_MASK 0x7 +#define FIFO_RXSIZE_OFF 0 #define FIFO_TXFE 0x80 #ifdef CONFIG_ARCH_IMX8 #define FIFO_RXFE 0x08 @@ -47,7 +53,7 @@ #define FIFO_RXFE 0x40 #endif

-#define WATER_TXWATER_OFF 1 +#define WATER_TXWATER_OFF 0 #define WATER_RXWATER_OFF 16

DECLARE_GLOBAL_DATA_PTR; @@ -318,15 +324,28 @@ static int _lpuart32_serial_tstc(struct lpuart_serial_platdata *plat) static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat) { struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg; - u32 ctrl; + u32 val, tx_fifo_size;

- lpuart_read32(plat->flags, &base->ctrl, &ctrl); - ctrl &= ~CTRL_RE; - ctrl &= ~CTRL_TE; - lpuart_write32(plat->flags, &base->ctrl, ctrl); + lpuart_read32(plat->flags, &base->ctrl, &val); + val &= ~CTRL_RE; + val &= ~CTRL_TE; + lpuart_write32(plat->flags, &base->ctrl, val);

lpuart_write32(plat->flags, &base->modir, 0); - lpuart_write32(plat->flags, &base->fifo, ~(FIFO_TXFE | FIFO_RXFE)); + + lpuart_read32(plat->flags, &base->fifo, &val); + tx_fifo_size = (val & FIFO_TXSIZE_MASK) >> FIFO_TXSIZE_OFF; + /* Set the TX water to half of FIFO size */ + if (tx_fifo_size > 1) + tx_fifo_size = tx_fifo_size >> 1; + + /* Set RX water to 0, to be triggered by any receive data */ + lpuart_write32(plat->flags, &base->water, + (tx_fifo_size << WATER_TXWATER_OFF)); + + /* Enable TX and RX FIFO */ + val |= (FIFO_TXFE | FIFO_RXFE | FIFO_TXFLUSH | FIFO_RXFLUSH); + lpuart_write32(plat->flags, &base->fifo, val);

lpuart_write32(plat->flags, &base->match, 0);

From: Peng Fan peng.fan@nxp.com

When CONIFG_CLK is enabled, use uclass clk api to handle the clock.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Jaehoon Chung jh80.chung@samsung.com Cc: Stefano Babic sbabic@denx.de --- drivers/mmc/fsl_esdhc.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 220f4f74a8..3cdfa7f5a6 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -11,6 +11,7 @@ #include <config.h> #include <common.h> #include <command.h> +#include <clk.h> #include <errno.h> #include <hwconfig.h> #include <mmc.h> @@ -121,6 +122,7 @@ struct esdhc_soc_data { struct fsl_esdhc_priv { struct fsl_esdhc *esdhc_regs; unsigned int sdhc_clk; + struct clk per_clk; unsigned int clock; unsigned int mode; unsigned int bus_width; @@ -1496,10 +1498,26 @@ static int fsl_esdhc_probe(struct udevice *dev)

init_clk_usdhc(dev->seq);

- priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq); - if (priv->sdhc_clk <= 0) { - dev_err(dev, "Unable to get clk for %s\n", dev->name); - return -EINVAL; + if (IS_ENABLED(CONFIG_CLK)) { + /* Assigned clock already set clock */ + ret = clk_get_by_name(dev, "per", &priv->per_clk); + if (ret) { + printf("Failed to get per_clk\n"); + return ret; + } + ret = clk_enable(&priv->per_clk); + if (ret) { + printf("Failed to enable per_clk\n"); + return ret; + } + + priv->sdhc_clk = clk_get_rate(&priv->per_clk); + } else { + priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq); + if (priv->sdhc_clk <= 0) { + dev_err(dev, "Unable to get clk for %s\n", dev->name); + return -EINVAL; + } }

ret = fsl_esdhc_init(priv, plat);

From: Peng Fan peng.fan@nxp.com

Add i.MX8QXP MEK board support Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver. Added README file.

Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com --- arch/arm/dts/Makefile | 2 + arch/arm/dts/fsl-imx8qxp-mek.dts | 246 ++++++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig | 13 ++ board/freescale/imx8qxp_mek/Kconfig | 14 ++ board/freescale/imx8qxp_mek/MAINTAINERS | 6 + board/freescale/imx8qxp_mek/Makefile | 7 + board/freescale/imx8qxp_mek/README | 72 +++++++ board/freescale/imx8qxp_mek/imx8qxp_mek.c | 170 +++++++++++++++ board/freescale/mx8mq_evk/README | 81 +++++++ configs/imx8qxp_mek_defconfig | 51 +++++ include/configs/imx8qxp_mek.h | 157 ++++++++++++++ 11 files changed, 819 insertions(+) create mode 100644 arch/arm/dts/fsl-imx8qxp-mek.dts create mode 100644 board/freescale/imx8qxp_mek/Kconfig create mode 100644 board/freescale/imx8qxp_mek/MAINTAINERS create mode 100644 board/freescale/imx8qxp_mek/Makefile create mode 100644 board/freescale/imx8qxp_mek/README create mode 100644 board/freescale/imx8qxp_mek/imx8qxp_mek.c create mode 100644 board/freescale/mx8mq_evk/README create mode 100644 configs/imx8qxp_mek_defconfig create mode 100644 include/configs/imx8qxp_mek.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8e6f8e99d3..4c9d4b6a09 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -454,6 +454,8 @@ dtb-$(CONFIG_MX7) += imx7-colibri.dtb \

dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb

+dtb-$(CONFIG_ARCH_IMX8) += fsl-imx8qxp-mek.dtb + dtb-$(CONFIG_RCAR_GEN3) += \ r8a7795-h3ulcb.dtb \ r8a7795-salvator-x.dtb \ diff --git a/arch/arm/dts/fsl-imx8qxp-mek.dts b/arch/arm/dts/fsl-imx8qxp-mek.dts new file mode 100644 index 0000000000..09ea3b4a3a --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp-mek.dts @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017-2018 NXP + */ + +/dts-v1/; + +#include "fsl-imx8qxp.dtsi" + +/ { + model = "Freescale i.MX8QXP MEK"; + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + + chosen { + bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200"; + stdout-path = &lpuart0; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>; + off-on-delay = <3480>; + enable-active-high; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx8qxp-mek { + pinctrl_hog: hoggrp { + fsl,pins = < + SC_P_MCLK_OUT0_ADMA_ACM_MCLK_OUT0 0x0600004c + SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 + >; + }; + + pinctrl_ioexp_rst: ioexp-rst-grp { + fsl,pins = < + SC_P_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000048 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000048 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000048 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000048 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000048 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000048 + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000048 + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000048 + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000048 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000048 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000048 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000048 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000048 + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000048 + >; + }; + + pinctrl_fec2: fec2grp { + fsl,pins = < + SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x06000048 + SC_P_ESAI0_FSR_CONN_ENET1_RGMII_TXC 0x06000048 + SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x06000048 + SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x06000048 + SC_P_ESAI0_FST_CONN_ENET1_RGMII_TXD2 0x06000048 + SC_P_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 0x06000048 + SC_P_ESAI0_TX0_CONN_ENET1_RGMII_RXC 0x06000048 + SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x06000048 + SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x06000048 + SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x06000048 + SC_P_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 0x06000048 + SC_P_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 0x06000048 + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + SC_P_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021 + SC_P_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 + SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x00000021 + SC_P_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 + SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + }; +}; + +&A35_0 { + u-boot,dm-pre-reloc; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; + status = "okay"; + + i2cswitch@71 { + compatible = "nxp,pca9646"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + + bb_i2c1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + mfi_i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + i2cexp1_i2c1: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + i2cexp2_i2c1: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + pca9557_a: gpio@1a { + compatible = "nxp,pca9557"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + }; + pca9557_b: gpio@1d { + compatible = "nxp,pca9557"; + reg = <0x1d>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&reg_usdhc2_vmmc>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii"; + phy-handle = <&ethphy0>; + fsl,ar8031-phy-fixup; + fsl,magic-packet; + status = "okay"; + phy-reset-gpios = <&pca9557_a 4 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 28910c1509..0d3a87cd74 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -10,4 +10,17 @@ config IMX8QXP config SYS_SOC default "imx8"

+choice + prompt "i.MX8 board select" + optional + +config TARGET_IMX8QXP_MEK + bool "Support i.MX8QXP MEK board" + select BOARD_LATE_INIT + select IMX8QXP + +endchoice + +source "board/freescale/imx8qxp_mek/Kconfig" + endif diff --git a/board/freescale/imx8qxp_mek/Kconfig b/board/freescale/imx8qxp_mek/Kconfig new file mode 100644 index 0000000000..b67300d816 --- /dev/null +++ b/board/freescale/imx8qxp_mek/Kconfig @@ -0,0 +1,14 @@ +if TARGET_IMX8QXP_MEK + +config SYS_BOARD + default "imx8qxp_mek" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "imx8qxp_mek" + +source "board/freescale/common/Kconfig" + +endif diff --git a/board/freescale/imx8qxp_mek/MAINTAINERS b/board/freescale/imx8qxp_mek/MAINTAINERS new file mode 100644 index 0000000000..e9bf0b35a3 --- /dev/null +++ b/board/freescale/imx8qxp_mek/MAINTAINERS @@ -0,0 +1,6 @@ +i.MX8QXP MEK BOARD +M: Peng Fan peng.fan@nxp.com +S: Maintained +F: board/freescale/imx8qxp_mek/ +F: include/configs/imx8qxp_mek.h +F: configs/imx8qxp_mek_defconfig diff --git a/board/freescale/imx8qxp_mek/Makefile b/board/freescale/imx8qxp_mek/Makefile new file mode 100644 index 0000000000..f9ee8aeff3 --- /dev/null +++ b/board/freescale/imx8qxp_mek/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2017 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8qxp_mek.o diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README new file mode 100644 index 0000000000..7f740894b2 --- /dev/null +++ b/board/freescale/imx8qxp_mek/README @@ -0,0 +1,72 @@ +U-Boot for the NXP i.MX8QXP EVK board + +Quick Start +=========== + +- Build U-Boot +- Build the ARM Trusted firmware binary +- Get scfw_tcm.bin and ahab-container.img +- Get mkimage tool +- Generate flash.bin using imx-mkimage +- Flash the binary into the SD card +- Boot + +Build U-Boot +============ + +$ make imx8qxp_mek_defconfig +$ make + +Get and Build the ARM Trusted firmware +====================================== + +$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ cd imx-atf/ +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 +$ make PLAT=imx8qxp bl31 + +Get scfw_tcm.bin and ahab-container.img +============================== + +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-0.7.bin +$ chmod +x imx-sc-firmware-0.7.bin +$ ./imx-sc-firmware-0.7.bin +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.6.bin +$ chmod +x firmware-imx-7.6.bin +$ ./firmware-imx-7.6.bin + +Get imx-mkimage tool +============================== +Download the imx-mkimage tool: + +$ git clone https://source.codeaurora.org/external/imx/imx-mkimage/ +$ cd imx-mkimage/ +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 + + +Generate flash.bin using imx-mkimage +==================================== + +Copy the following binaries to imx-mkimage/iMX8M folder: + +$ cp imx-atf/build/imx8qxp/release/bl31.bin imx-mkimage/iMX8QX/ +$ cp u-boot/u-boot.bin imx-mkimage/iMX8QX/ + +Copy the following firmwares to imx-mkimage/iMX8 folder : + +$ cp firmware-imx-7.6/firmware/seco/ahab-container.img imx-mkimage/iMX8QX/ +$ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin imx-mkimage/iMX8QX/scfw_tcm.bin + +$ cd imx-mkimage/ +$ make SOC=iMX8QX flash + +Flash the binary into the SD card +================================= + +Burn the flash.bin binary to SD card offset 32KB: + +$ sudo dd if=iMX8QX/flash.bin of=/dev/sd[x] bs=1024 seek=32 + +Boot +==== +Set Boot switch SW2: 1100. diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c new file mode 100644 index 0000000000..a4c587a390 --- /dev/null +++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <errno.h> +#include <linux/libfdt.h> +#include <environment.h> +#include <fsl_esdhc.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/imx8-pins.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define GPIO_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +static iomux_cfg_t uart0_pads[] = { + SC_P_UART0_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + SC_P_UART0_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx8_iomux_setup_multiple_pads(uart0_pads, ARRAY_SIZE(uart0_pads)); +} + +int board_early_init_f(void) +{ + int ret; + /* Set UART0 clock root to 80 MHz */ + sc_pm_clock_rate_t rate = 80000000; + + /* Power up UART0 */ + ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON); + if (ret) + return ret; + + ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate); + if (ret) + return ret; + + /* Enable UART0 clock root */ + ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false); + if (ret) + return ret; + + setup_iomux_uart(); + + return 0; +} + +#if IS_ENABLED(CONFIG_DM_GPIO) +static void board_gpio_init(void) +{ + struct gpio_desc desc; + int ret; + + ret = dm_gpio_lookup_name("gpio@1a_3", &desc); + if (ret) + return; + + ret = dm_gpio_request(&desc, "bb_per_rst_b"); + if (ret) + return; + + dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); + dm_gpio_set_value(&desc, 0); + udelay(50); + dm_gpio_set_value(&desc, 1); +} +#else +static inline void board_gpio_init(void) {} +#endif + +#if IS_ENABLED(CONFIG_FEC_MXC) +#include <miiphy.h> + +int board_phy_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); + + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif + +void build_info(void) +{ + u32 sc_build = 0, sc_commit = 0; + + /* Get SCFW build and commit id */ + sc_misc_build_info(-1, &sc_build, &sc_commit); + if (!sc_build) { + printf("SCFW does not support build info\n"); + sc_commit = 0; /* Display 0 when the build info is not supported*/ + } + printf("Build: SCFW %x\n", sc_commit); +} + +int checkboard(void) +{ + puts("Board: iMX8QXP MEK\n"); + + build_info(); + print_bootinfo(); + + return 0; +} + +int board_init(void) +{ + board_gpio_init(); + + return 0; +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(ulong addr) +{ + /* TODO */ +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + return 0; +} +#endif + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + env_set("board_name", "MEK"); + env_set("board_rev", "iMX8QXP"); +#endif + + return 0; +} diff --git a/board/freescale/mx8mq_evk/README b/board/freescale/mx8mq_evk/README new file mode 100644 index 0000000000..cd7e67eec5 --- /dev/null +++ b/board/freescale/mx8mq_evk/README @@ -0,0 +1,81 @@ +U-Boot for the NXP i.MX8MQ EVK board + +Quick Start +=========== + +- Build U-Boot +- Build the ARM Trusted firmware binary +- Get DDR firmware and mkimage tool +- Generate flash.bin using imx-mkimage +- Flash the binary into the SD card +- Boot + +Build U-Boot +============ + +$ make mx8mq_evk_defconfig +$ make + +Get and Build the ARM Trusted firmware +====================================== + +$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ cd imx-atf/ +$ git checkout origin/imx_4.9.51_imx8m_beta +$ make PLAT=imx8mq bl31 + +Get the DDR firmware and mkimage tool +============================== + +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.2.bin +$ chmod +x firmware-imx-7.2.bin +$ ./firmware-imx-7.2.bin + +Download the imx-mkimage tool: + +$ git clone https://source.codeaurora.org/external/imx/imx-mkimage/ +$ cd imx-mkimage/ +$ git checkout origin/imx_4.9.51_imx8m_beta + + +Generate flash.bin using imx-mkimage +==================================== + +Copy the following binaries to imx-mkimage/iMX8M folder: + +$ cp imx-atf/build/imx8mq/release/bl31.bin imx-mkimage/iMX8M/ +$ cp u-boot/u-boot-nodtb.bin imx-mkimage/iMX8M/ +$ cp u-boot/spl/u-boot-spl.bin imx-mkimage/iMX8M/ +$ cp u-boot/arch/arm/dts/fsl-imx8mq-evk.dtb imx-mkimage/iMX8M/ + +Copy the following firmwares to imx-mkimage/iMX8 folder : + +$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin imx-mkimage/iMX8M/ +$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin imx-mkimage/iMX8M/ +$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin imx-mkimage/iMX8M/ +$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin imx-mkimage/iMX8M/ + +If you want to run with HDMI, copy signed_hdmi_imx8m.bin to imx-mkimage/iMX8M. + +Before generating the flash.bin, transfer the mkimage generated by U-Boot to iMX8M folder: + +$ cp u-boot/tools/mkimage imx-mkimage/iMX8M/ +$ mv imx-mkimage/iMX8M/mkimage imx-mkimage/iMX8M/mkimage_uboot + +$ cd imx-mkimage/ +$ make SOC=iMX8M flash_spl_uboot + +Or for using HDMI: + +$ make SOC=iMX8M flash_hdmi_spl_uboot + +Flash the binary into the SD card +================================= + +Burn the flash.bin binary to SD card offset 33KB: + +$ sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33 + +Boot +==== +Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD. diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig new file mode 100644 index 0000000000..73e9d93a8f --- /dev/null +++ b/configs/imx8qxp_mek_defconfig @@ -0,0 +1,51 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8=y +CONFIG_SYS_TEXT_BASE=0x80020000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_IMX8QXP_MEK=y +CONFIG_NR_DRAM_BANKS=3 +CONFIG_BOOTDELAY=3 +CONFIG_CMD_CPU=y +# CONFIG_CMD_IMPORTENV is not set +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_FAT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-mek" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_CLK_IMX8=y +CONFIG_CPU=y +CONFIG_DM_GPIO=y +CONFIG_MXC_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC_SHARE_MDIO=y +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h new file mode 100644 index 0000000000..d34d174cac --- /dev/null +++ b/include/configs/imx8qxp_mek.h @@ -0,0 +1,157 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __IMX8QXP_MEK_H +#define __IMX8QXP_MEK_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#define CONFIG_REMAKE_ELF + +#define CONFIG_BOARD_EARLY_INIT_F + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_BOARD_SETUP + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV +#undef CONFIG_CMD_IMLS + +#undef CONFIG_CMD_CRC32 +#undef CONFIG_BOOTM_NETBSD + +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define USDHC1_BASE_ADDR 0x5B010000 +#define USDHC2_BASE_ADDR 0x5B020000 +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=Image\0" \ + "panel=NULL\0" \ + "console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \ + "fdt_addr=0x83000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "boot_fdt=try\0" \ + "fdt_file=fsl-imx8qxp-mek.dtb\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "echo wait for boot; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${loadaddr} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "booti; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else booti ${loadaddr} - ${fdt_addr}; fi" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x80280000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 + +/* Default environment is in SD */ +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_OFFSET (64 * SZ_64K) +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_2 0x880000000 +#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ +/* LPDDR4 board total DDR is 3GB */ +#define PHYS_SDRAM_2_SIZE 0x40000000 /* 1 GB */ + +/* Serial */ +#define CONFIG_BAUDRATE 115200 + +/* Monitor Command Prompt */ +#define CONFIG_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +#ifndef CONFIG_DM_PCA953X +#define CONFIG_PCA953X +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#endif + +/* Networking */ +#define CONFIG_FEC_XCV_TYPE RGMII +#define FEC_QUIRK_ENET_MAC + +#endif /* __IMX8QXP_MEK_H */