[U-Boot] [PATCH 1/5] am33xx: Update DT files, add am335x_gp_evm_config target
- Re-sync DT files for am33xx with Linux Kernel v4.1 - Include DT file now for the "AM335x GP EVM" and build target for it, via device tree and DM. - We only need to provide platform data for UART when OF_CONTROL isn't also enabled really. We can just push GPIO to coming from DT
Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/cpu/armv7/am33xx/board.c | 36 +- arch/arm/dts/Makefile | 2 +- arch/arm/dts/am335x-bone-common.dtsi | 410 +++++++++++------- arch/arm/dts/am335x-bone.dts | 29 ++ arch/arm/dts/am335x-boneblack.dts | 72 ++++ arch/arm/dts/am335x-evm.dts | 765 ++++++++++++++++++++++++++++++++++ arch/arm/dts/am33xx-clocks.dtsi | 646 ++++++++++++++++++++++++++++ arch/arm/dts/am33xx.dtsi | 297 +++++++++++-- arch/arm/dts/tps65910.dtsi | 91 ++++ configs/am335x_gp_evm_defconfig | 14 + 10 files changed, 2156 insertions(+), 206 deletions(-) create mode 100644 arch/arm/dts/am335x-bone.dts create mode 100644 arch/arm/dts/am335x-evm.dts create mode 100644 arch/arm/dts/am33xx-clocks.dtsi create mode 100644 arch/arm/dts/tps65910.dtsi create mode 100644 configs/am335x_gp_evm_defconfig
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 67bef23..81492a5 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -38,45 +38,22 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_DM_GPIO -static const struct omap_gpio_platdata am33xx_gpio[] = { - { 0, AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, - { 1, AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { 2, AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { 3, AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, -#ifdef CONFIG_AM43XX - { 4, AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { 5, AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, -#endif -}; - -U_BOOT_DEVICES(am33xx_gpios) = { - { "gpio_omap", &am33xx_gpio[0] }, - { "gpio_omap", &am33xx_gpio[1] }, - { "gpio_omap", &am33xx_gpio[2] }, - { "gpio_omap", &am33xx_gpio[3] }, -#ifdef CONFIG_AM43XX - { "gpio_omap", &am33xx_gpio[4] }, - { "gpio_omap", &am33xx_gpio[5] }, -#endif -}; - -# ifndef CONFIG_OF_CONTROL +#if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_OF_CONTROL) /* * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove * the CONFIGs. At the same time, we should move this to the board files. */ static const struct ns16550_platdata am33xx_serial[] = { { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK }, -# ifdef CONFIG_SYS_NS16550_COM2 +# ifdef CONFIG_SYS_NS16550_COM2 { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK }, -# ifdef CONFIG_SYS_NS16550_COM3 +# ifdef CONFIG_SYS_NS16550_COM3 { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK }, { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK }, { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK }, { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK }, -# endif # endif +# endif };
U_BOOT_DEVICES(am33xx_uarts) = { @@ -91,10 +68,10 @@ U_BOOT_DEVICES(am33xx_uarts) = { # endif # endif }; -# endif +#endif
-#else
+#ifndef CONFIG_DM_GPIO static const struct gpio_bank gpio_bank_am33xx[] = { { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -107,7 +84,6 @@ static const struct gpio_bank gpio_bank_am33xx[] = { };
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; - #endif
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ba63553..43b1616 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -49,7 +49,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb -dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb +dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi index e70b4d1..fec7834 100644 --- a/arch/arm/dts/am335x-bone-common.dtsi +++ b/arch/arm/dts/am335x-bone-common.dtsi @@ -7,13 +7,6 @@ */
/ { - model = "TI AM335x BeagleBone"; - compatible = "ti,am335x-bone", "ti,am33xx"; - - chosen { - stdout-path = &uart0; - }; - cpus { cpu@0 { cpu0-supply = <&dcdc2_reg>; @@ -25,184 +18,299 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ };
- am33xx_pinmux: pinmux@44e10800 { + leds { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ - >; - }; + pinctrl-0 = <&user_leds_s0>;
- i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; + compatible = "gpio-leds";
- uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; };
- clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; };
- cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ - >; + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; };
- cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; }; + };
- davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +};
- davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; };
- ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + };
- status = "okay"; - }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + };
- musb: usb@47400000 { - status = "okay"; + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + };
- control@44e10000 { - status = "okay"; - }; + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + };
- usb-phy@47401300 { - status = "okay"; - }; + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + };
- usb-phy@47401b00 { - status = "okay"; - }; + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + };
- usb@47401000 { - status = "okay"; - }; + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + };
- usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + };
- dma-controller@07402000 { - status = "okay"; - }; - }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>;
- i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; + status = "okay"; +};
- status = "okay"; - clock-frequency = <400000>; +&usb { + status = "okay"; +};
- tps: tps@24 { - reg = <0x24>; - }; +&usb_ctrl_mod { + status = "okay"; +};
+&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; }; }; +};
- leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>;
- compatible = "gpio-leds"; + status = "okay"; + clock-frequency = <100000>;
- led@2 { - label = "beaglebone:green:heartbeat"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; + cape_eeprom0: cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + cape0_data: cape_data@0 { + reg = <0 0x100>; }; + };
- led@3 { - label = "beaglebone:green:mmc0"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; + cape_eeprom1: cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + #address-cells = <1>; + #size-cells = <1>; + cape1_data: cape_data@0 { + reg = <0 0x100>; }; + };
- led@4 { - label = "beaglebone:green:usr2"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; + cape_eeprom2: cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + #address-cells = <1>; + #size-cells = <1>; + cape2_data: cape_data@0 { + reg = <0 0x100>; }; + };
- led@5 { - label = "beaglebone:green:usr3"; - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - default-state = "off"; + cape_eeprom3: cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + cape3_data: cape_data@0 { + reg = <0 0x100>; }; }; };
+ /include/ "tps65217.dtsi"
&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + regulators { dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; regulator-always-on; };
@@ -225,18 +333,22 @@ };
ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; regulator-always-on; };
ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; regulator-always-on; };
ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; regulator-always-on; };
ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; regulator-always-on; }; }; @@ -256,11 +368,29 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - + status = "okay"; };
&davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; }; diff --git a/arch/arm/dts/am335x-bone.dts b/arch/arm/dts/am335x-bone.dts new file mode 100644 index 0000000..81441cc --- /dev/null +++ b/arch/arm/dts/am335x-bone.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; diff --git a/arch/arm/dts/am335x-boneblack.dts b/arch/arm/dts/am335x-boneblack.dts index 197cadf..679248a 100644 --- a/arch/arm/dts/am335x-boneblack.dts +++ b/arch/arm/dts/am335x-boneblack.dts @@ -10,8 +10,80 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi"
+/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; +}; + &ldo3_reg { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts new file mode 100644 index 0000000..e1c5d4f --- /dev/null +++ b/arch/arm/dts/am335x-evm.dts @@ -0,0 +1,765 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x EVM"; + compatible = "ti,am335x-evm", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WLAN_EN GPIO for this board - Bank1, pin16 */ + gpio = <&gpio1 16 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */ + &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */ + &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */ + + col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */ + &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + panel { + compatible = "ti,tilcdc,panel"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_s0>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + 800x480p62 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <39>; + hback-porch = <39>; + hsync-len = <47>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM335x-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ + 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ + 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ + >; + }; + + lcd_pins_s0: lcd_pins_s0 { + pinctrl-single,pins = < + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + am335x_evm_audio_pins: am335x_evm_audio_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vaux2_reg>; + IOVDD-supply = <&vaux2_reg>; + DRVDD-supply = <&vaux2_reg>; + DVDD-supply = <&vbat>; + }; +}; + +&lcdc { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&epwmss0 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; + }; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000C0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001C0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x001E0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00A00000 0x0F600000>; + }; + }; +}; + +#include "tps65910.dtsi" + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&am335x_evm_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + ti,charge-delay = <0x400>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&mmc3 { + /* these are on the crossbar and are outlined in the + xbar-event-map element */ + dmas = <&edma 12 + &edma 13>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 12 + 2 13>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&dcan1 { + status = "disabled"; /* Enable only if Profile 1 is selected */ + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins_default>; +}; diff --git a/arch/arm/dts/am33xx-clocks.dtsi b/arch/arm/dts/am33xx-clocks.dtsi new file mode 100644 index 0000000..afb4b3a --- /dev/null +++ b/arch/arm/dts/am33xx-clocks.dtsi @@ -0,0 +1,646 @@ +/* + * Device Tree Source for AM33xx clock data + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +&scm_clocks { + sys_clkin_ck: sys_clkin_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; + ti,bit-shift = <22>; + reg = <0x0040>; + }; + + adc_tsc_fck: adc_tsc_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dcan0_fck: dcan0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dcan1_fck: dcan1_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + mcasp0_fck: mcasp0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + mcasp1_fck: mcasp1_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + smartreflex0_fck: smartreflex0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + smartreflex1_fck: smartreflex1_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + sha0_fck: sha0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + aes0_fck: aes0_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + rng_fck: rng_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <0>; + reg = <0x0664>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <1>; + reg = <0x0664>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; +}; +&prcm_clocks { + clk_32768_ck: clk_32768_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk_rc32k_ck: clk_rc32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_24000000_ck: virt_24000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + virt_25000000_ck: virt_25000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + virt_26000000_ck: virt_26000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + tclkin_ck: tclkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + dpll_core_ck: dpll_core_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0490>, <0x045c>, <0x0468>; + }; + + dpll_core_x2_ck: dpll_core_x2_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-x2-clock"; + clocks = <&dpll_core_ck>; + }; + + dpll_core_m4_ck: dpll_core_m4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0480>; + ti,index-starts-at-one; + }; + + dpll_core_m5_ck: dpll_core_m5_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0484>; + ti,index-starts-at-one; + }; + + dpll_core_m6_ck: dpll_core_m6_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x04d8>; + ti,index-starts-at-one; + }; + + dpll_mpu_ck: dpll_mpu_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0488>, <0x0420>, <0x042c>; + }; + + dpll_mpu_m2_ck: dpll_mpu_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_mpu_ck>; + ti,max-div = <31>; + reg = <0x04a8>; + ti,index-starts-at-one; + }; + + dpll_ddr_ck: dpll_ddr_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0494>, <0x0434>, <0x0440>; + }; + + dpll_ddr_m2_ck: dpll_ddr_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_ddr_ck>; + ti,max-div = <31>; + reg = <0x04a0>; + ti,index-starts-at-one; + }; + + dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_ddr_m2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + dpll_disp_ck: dpll_disp_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0498>, <0x0448>, <0x0454>; + }; + + dpll_disp_m2_ck: dpll_disp_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_disp_ck>; + ti,max-div = <31>; + reg = <0x04a4>; + ti,index-starts-at-one; + ti,set-rate-parent; + }; + + dpll_per_ck: dpll_per_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-j-type-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x048c>, <0x0470>, <0x049c>; + }; + + dpll_per_m2_ck: dpll_per_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_ck>; + ti,max-div = <31>; + reg = <0x04ac>; + ti,index-starts-at-one; + }; + + dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + cefuse_fck: cefuse_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <1>; + reg = <0x0a20>; + }; + + clk_24mhz: clk_24mhz { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + clkdiv32k_ck: clkdiv32k_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_24mhz>; + clock-mult = <1>; + clock-div = <732>; + }; + + clkdiv32k_ick: clkdiv32k_ick { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ck>; + ti,bit-shift = <1>; + reg = <0x014c>; + }; + + l3_gclk: l3_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + pruss_ocp_gclk: pruss_ocp_gclk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; + reg = <0x0530>; + }; + + mmu_fck: mmu_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_core_m4_ck>; + ti,bit-shift = <1>; + reg = <0x0914>; + }; + + timer1_fck: timer1_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; + reg = <0x0528>; + }; + + timer2_fck: timer2_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0508>; + }; + + timer3_fck: timer3_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x050c>; + }; + + timer4_fck: timer4_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0510>; + }; + + timer5_fck: timer5_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0518>; + }; + + timer6_fck: timer6_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x051c>; + }; + + timer7_fck: timer7_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + reg = <0x0504>; + }; + + usbotg_fck: usbotg_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_ck>; + ti,bit-shift = <8>; + reg = <0x047c>; + }; + + dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + ieee5000_fck: ieee5000_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_core_m4_div2_ck>; + ti,bit-shift = <1>; + reg = <0x00e4>; + }; + + wdt1_fck: wdt1_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; + reg = <0x0538>; + }; + + l4_rtc_gclk: l4_rtc_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + l4hs_gclk: l4hs_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l3s_gclk: l3s_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_div2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l4fw_gclk: l4fw_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_div2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l4ls_gclk: l4ls_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_div2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + sysclk_div_ck: sysclk_div_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + cpsw_125mhz_gclk: cpsw_125mhz_gclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m5_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; + reg = <0x0520>; + }; + + gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>; + reg = <0x053c>; + }; + + gpio0_dbclk: gpio0_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&gpio0_dbclk_mux_ck>; + ti,bit-shift = <18>; + reg = <0x0408>; + }; + + gpio1_dbclk: gpio1_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ick>; + ti,bit-shift = <18>; + reg = <0x00ac>; + }; + + gpio2_dbclk: gpio2_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ick>; + ti,bit-shift = <18>; + reg = <0x00b0>; + }; + + gpio3_dbclk: gpio3_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkdiv32k_ick>; + ti,bit-shift = <18>; + reg = <0x00b4>; + }; + + lcd_gclk: lcd_gclk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; + reg = <0x0534>; + ti,set-rate-parent; + }; + + mmc_clk: mmc_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + gfx_fclk_clksel_ck: gfx_fclk_clksel_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + reg = <0x052c>; + }; + + gfx_fck_div_ck: gfx_fck_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&gfx_fclk_clksel_ck>; + reg = <0x052c>; + ti,max-div = <2>; + }; + + sysclkout_pre_ck: sysclkout_pre_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; + reg = <0x0700>; + }; + + clkout2_div_ck: clkout2_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sysclkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + reg = <0x0700>; + }; + + dbg_sysclk_ck: dbg_sysclk_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <19>; + reg = <0x0414>; + }; + + dbg_clka_ck: dbg_clka_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_core_m4_ck>; + ti,bit-shift = <30>; + reg = <0x0414>; + }; + + stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; + ti,bit-shift = <22>; + reg = <0x0414>; + }; + + trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; + ti,bit-shift = <20>; + reg = <0x0414>; + }; + + stm_clk_div_ck: stm_clk_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&stm_pmd_clock_mux_ck>; + ti,bit-shift = <27>; + ti,max-div = <64>; + reg = <0x0414>; + ti,index-power-of-two; + }; + + trace_clk_div_ck: trace_clk_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&trace_pmd_clk_mux_ck>; + ti,bit-shift = <24>; + ti,max-div = <64>; + reg = <0x0414>; + ti,index-power-of-two; + }; + + clkout2_ck: clkout2_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout2_div_ck>; + ti,bit-shift = <7>; + reg = <0x0700>; + }; +}; + +&prcm_clockdomains { + clk_24mhz_clkdm: clk_24mhz_clkdm { + compatible = "ti,clockdomain"; + clocks = <&clkdiv32k_ick>; + }; +}; diff --git a/arch/arm/dts/am33xx.dtsi b/arch/arm/dts/am33xx.dtsi index f9c5da9..21fcc44 100644 --- a/arch/arm/dts/am33xx.dtsi +++ b/arch/arm/dts/am33xx.dtsi @@ -18,6 +18,9 @@ interrupt-parent = <&intc>;
aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -30,6 +33,8 @@ usb1 = &usb1; phy0 = &usb0_phy; phy1 = &usb1_phy; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; };
cpus { @@ -53,12 +58,21 @@ 275000 1125000 >; voltage-tolerance = <2>; /* 2 percentage */ + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + clock-latency = <300000>; /* From omap-cpufreq driver */ }; };
+ pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -69,19 +83,10 @@ }; };
- am33xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; - reg = <0x44e10800 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7f>; - }; - /* * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex.Since - * that will not bring real advantage to represent that in DT + * The real AM33XX interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ @@ -92,21 +97,81 @@ ranges; ti,hwmods = "l3_main";
+ l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am3-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x280000>; + + prcm: prcm@200000 { + compatible = "ti,am3-prcm"; + reg = <0x200000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; + }; + }; + intc: interrupt-controller@48200000 { - compatible = "ti,omap2-intc"; + compatible = "ti,am33xx-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <128>; reg = <0x48200000 0x1000>; };
+ edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x44e07000 0x1000>; interrupts = <96>; }; @@ -117,7 +182,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x4804c000 0x1000>; interrupts = <98>; }; @@ -128,7 +193,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ac000 0x1000>; interrupts = <32>; }; @@ -139,7 +204,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ae000 0x1000>; interrupts = <62>; }; @@ -151,6 +216,8 @@ reg = <0x44e09000 0x2000>; interrupts = <72>; status = "disabled"; + dmas = <&edma 26>, <&edma 27>; + dma-names = "tx", "rx"; };
uart1: serial@48022000 { @@ -160,6 +227,8 @@ reg = <0x48022000 0x2000>; interrupts = <73>; status = "disabled"; + dmas = <&edma 28>, <&edma 29>; + dma-names = "tx", "rx"; };
uart2: serial@48024000 { @@ -169,6 +238,8 @@ reg = <0x48024000 0x2000>; interrupts = <74>; status = "disabled"; + dmas = <&edma 30>, <&edma 31>; + dma-names = "tx", "rx"; };
uart3: serial@481a6000 { @@ -228,6 +299,51 @@ status = "disabled"; };
+ mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x48060000 0x1000>; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x481d8000 0x1000>; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + status = "disabled"; + }; + + hwspinlock: spinlock@480ca000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x480ca000 0x1000>; + ti,hwmods = "spinlock"; + #hwlock-cells = <1>; + }; + wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; @@ -235,24 +351,42 @@ interrupts = <91>; };
- dcan0: d_can@481cc000 { - compatible = "bosch,d_can"; + dcan0: can@481cc000 { + compatible = "ti,am3352-d_can"; ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000 - 0x44e10644 0x4>; + reg = <0x481cc000 0x2000>; + clocks = <&dcan0_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = <52>; status = "disabled"; };
- dcan1: d_can@481d0000 { - compatible = "bosch,d_can"; + dcan1: can@481d0000 { + compatible = "ti,am3352-d_can"; ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000 - 0x44e10644 0x4>; + reg = <0x481d0000 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = <55>; status = "disabled"; };
+ mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; + }; + timer1: timer@44e31000 { compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; @@ -307,8 +441,8 @@ ti,timer-pwm; };
- rtc@44e3e000 { - compatible = "ti,da830-rtc"; + rtc: rtc@44e3e000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = <75 76>; @@ -323,6 +457,11 @@ interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; + dmas = <&edma 16 + &edma 17 + &edma 18 + &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; };
@@ -334,6 +473,11 @@ interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; + dmas = <&edma 42 + &edma 43 + &edma 44 + &edma 45>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; };
@@ -346,7 +490,7 @@ ti,hwmods = "usb_otg_hs"; status = "disabled";
- ctrl_mod: control@44e10000 { + usb_ctrl_mod: control@44e10620 { compatible = "ti,am335x-usb-ctrl-module"; reg = <0x44e10620 0x10 0x44e10648 0x4>; @@ -359,7 +503,7 @@ reg = <0x47401300 0x100>; reg-names = "phy"; status = "disabled"; - ti,ctrl_mod = <&ctrl_mod>; + ti,ctrl_mod = <&usb_ctrl_mod>; };
usb0: usb@47401000 { @@ -407,7 +551,7 @@ reg = <0x47401b00 0x100>; reg-names = "phy"; status = "disabled"; - ti,ctrl_mod = <&ctrl_mod>; + ti,ctrl_mod = <&usb_ctrl_mod>; };
usb1: usb@47401800 { @@ -449,7 +593,7 @@ "tx14", "tx15"; };
- cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 @@ -480,6 +624,8 @@ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; + interrupts = <31>; + interrupt-names = "ecap0"; ti,hwmods = "ecap0"; status = "disabled"; }; @@ -508,6 +654,8 @@ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48302100 0x80>; + interrupts = <47>; + interrupt-names = "ecap1"; ti,hwmods = "ecap1"; status = "disabled"; }; @@ -536,6 +684,8 @@ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48304100 0x80>; + interrupts = <61>; + interrupt-names = "ecap2"; ti,hwmods = "ecap2"; status = "disabled"; }; @@ -552,6 +702,8 @@ mac: ethernet@4a100000 { compatible = "ti,cpsw"; ti,hwmods = "cpgmac0"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; @@ -575,6 +727,8 @@ */ interrupts = <40 41 42 43>; ranges; + syscon = <&scm_conf>; + status = "disabled";
davinci_mdio: mdio@4a101000 { compatible = "ti,davinci_mdio"; @@ -583,6 +737,7 @@ ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x4a101000 0x100>; + status = "disabled"; };
cpsw_emac0: slave@4a100200 { @@ -594,12 +749,17 @@ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; };
ocmcram: ocmcram@40300000 { - compatible = "ti,am3352-ocmcram"; - reg = <0x40300000 0x10000>; - ti,hwmods = "ocmcram"; + compatible = "mmio-sram"; + reg = <0x40300000 0x10000>; /* 64k */ };
wkup_m3: wkup_m3@44d00000 { @@ -607,6 +767,7 @@ reg = <0x44d00000 0x4000 /* M3 UMEM */ 0x44d80000 0x2000>; /* M3 DMEM */ ti,hwmods = "wkup_m3"; + ti,no-reset-on-init; };
elm: elm@48080000 { @@ -617,6 +778,15 @@ status = "disabled"; };
+ lcdc: lcdc@4830e000 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + status = "disabled"; + }; + tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; reg = <0x44e0d000 0x1000>; @@ -637,6 +807,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; + ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; gpmc,num-cs = <7>; @@ -645,5 +816,61 @@ #size-cells = <1>; status = "disabled"; }; + + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; + + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <103>; + dmas = <&edma 6>, + <&edma 5>; + dma-names = "tx", "rx"; + }; + + mcasp0: mcasp@48038000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8>, + <&edma 9>; + dma-names = "tx", "rx"; + }; + + mcasp1: mcasp@4803C000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp1"; + reg = <0x4803C000 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10>, + <&edma 11>; + dma-names = "tx", "rx"; + }; + + rng: rng@48310000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48310000 0x2000>; + interrupts = <111>; + }; }; }; + +/include/ "am33xx-clocks.dtsi" diff --git a/arch/arm/dts/tps65910.dtsi b/arch/arm/dts/tps65910.dtsi new file mode 100644 index 0000000..b0ac665 --- /dev/null +++ b/arch/arm/dts/tps65910.dtsi @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65910.pdf + */ + +&tps { + compatible = "ti,tps65910"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vrtc_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vrtc"; + }; + + vio_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vio"; + }; + + vdd1_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vdd1"; + }; + + vdd2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vdd2"; + }; + + vdd3_reg: regulator@4 { + reg = <4>; + regulator-compatible = "vdd3"; + }; + + vdig1_reg: regulator@5 { + reg = <5>; + regulator-compatible = "vdig1"; + }; + + vdig2_reg: regulator@6 { + reg = <6>; + regulator-compatible = "vdig2"; + }; + + vpll_reg: regulator@7 { + reg = <7>; + regulator-compatible = "vpll"; + }; + + vdac_reg: regulator@8 { + reg = <8>; + regulator-compatible = "vdac"; + }; + + vaux1_reg: regulator@9 { + reg = <9>; + regulator-compatible = "vaux1"; + }; + + vaux2_reg: regulator@10 { + reg = <10>; + regulator-compatible = "vaux2"; + }; + + vaux33_reg: regulator@11 { + reg = <11>; + regulator-compatible = "vaux33"; + }; + + vmmc_reg: regulator@12 { + reg = <12>; + regulator-compatible = "vmmc"; + }; + + vbb_reg: regulator@13 { + reg = <13>; + regulator-compatible = "vbb"; + }; + }; +}; diff --git a/configs/am335x_gp_evm_defconfig b/configs/am335x_gp_evm_defconfig new file mode 100644 index 0000000..62d3b6b --- /dev/null +++ b/configs/am335x_gp_evm_defconfig @@ -0,0 +1,14 @@ +CONFIG_ARM=y +CONFIG_TARGET_AM335X_EVM=y +CONFIG_DEFAULT_DEVICE_TREE="am335x-evm" +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SYS_EXTRA_OPTIONS="NAND" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_SPI_FLASH=y +CONFIG_RSA=y
The "method" parameter was part of the original port of the driver from the kernel. At some point this may have been added to allow for future differentiation (as omap1 and omap2 have different GPIO IP blocks, so this wasn't an unreasonable thing to do). At this point however it's just extra overhead, so drop.
Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/cpu/armv7/am33xx/board.c | 12 ++--- arch/arm/cpu/armv7/omap3/board.c | 24 ++++----- arch/arm/cpu/armv7/omap4/hwinit.c | 12 ++--- arch/arm/cpu/armv7/omap5/hwinit.c | 18 ++++--- arch/arm/include/asm/omap_gpio.h | 7 +-- drivers/gpio/omap_gpio.c | 107 ++++++++++++++++++++----------------- 6 files changed, 94 insertions(+), 86 deletions(-)
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 81492a5..77c1f9b 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -73,13 +73,13 @@ U_BOOT_DEVICES(am33xx_uarts) = {
#ifndef CONFIG_DM_GPIO static const struct gpio_bank gpio_bank_am33xx[] = { - { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO0_BASE }, + { (void *)AM33XX_GPIO1_BASE }, + { (void *)AM33XX_GPIO2_BASE }, + { (void *)AM33XX_GPIO3_BASE }, #ifdef CONFIG_AM43XX - { (void *)AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO4_BASE }, + { (void *)AM33XX_GPIO5_BASE }, #endif };
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 17cb5b7..8252b32 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -38,12 +38,12 @@ static void omap3_invalidate_l2_cache_secure(void);
#ifdef CONFIG_DM_GPIO static const struct omap_gpio_platdata omap34xx_gpio[] = { - { 0, OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { 1, OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { 2, OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { 3, OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { 4, OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { 5, OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, + { 0, OMAP34XX_GPIO1_BASE }, + { 1, OMAP34XX_GPIO2_BASE }, + { 2, OMAP34XX_GPIO3_BASE }, + { 3, OMAP34XX_GPIO4_BASE }, + { 4, OMAP34XX_GPIO5_BASE }, + { 5, OMAP34XX_GPIO6_BASE }, };
U_BOOT_DEVICES(am33xx_gpios) = { @@ -58,12 +58,12 @@ U_BOOT_DEVICES(am33xx_gpios) = { #else
static const struct gpio_bank gpio_bank_34xx[6] = { - { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO1_BASE }, + { (void *)OMAP34XX_GPIO2_BASE }, + { (void *)OMAP34XX_GPIO3_BASE }, + { (void *)OMAP34XX_GPIO4_BASE }, + { (void *)OMAP34XX_GPIO5_BASE }, + { (void *)OMAP34XX_GPIO6_BASE }, };
const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 9792761..a68947f 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -25,12 +25,12 @@ DECLARE_GLOBAL_DATA_PTR; u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
static const struct gpio_bank gpio_bank_44xx[6] = { - { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO1_BASE }, + { (void *)OMAP44XX_GPIO2_BASE }, + { (void *)OMAP44XX_GPIO3_BASE }, + { (void *)OMAP44XX_GPIO4_BASE }, + { (void *)OMAP44XX_GPIO5_BASE }, + { (void *)OMAP44XX_GPIO6_BASE }, };
const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 39f8d0d..ad15b94 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -27,18 +27,20 @@ DECLARE_GLOBAL_DATA_PTR;
u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
+#ifndef CONFIG_DM_GPIO static struct gpio_bank gpio_bank_54xx[8] = { - { (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO7_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO8_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO1_BASE }, + { (void *)OMAP54XX_GPIO2_BASE }, + { (void *)OMAP54XX_GPIO3_BASE }, + { (void *)OMAP54XX_GPIO4_BASE }, + { (void *)OMAP54XX_GPIO5_BASE }, + { (void *)OMAP54XX_GPIO6_BASE }, + { (void *)OMAP54XX_GPIO7_BASE }, + { (void *)OMAP54XX_GPIO8_BASE }, };
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; +#endif
void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size) { diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 839af54..ef38b63 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -23,24 +23,19 @@
#include <asm/arch/cpu.h>
-enum gpio_method { - METHOD_GPIO_24XX = 4, -}; - #ifdef CONFIG_DM_GPIO
/* Information about a GPIO bank */ struct omap_gpio_platdata { int bank_index; ulong base; /* address of registers in physical memory */ - enum gpio_method method; + const char *port_name; };
#else
struct gpio_bank { void *base; - int method; };
extern const struct gpio_bank *const omap_gpio_bank; diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index 0a1e124..cd960dc 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -20,9 +20,13 @@ */ #include <common.h> #include <dm.h> +#include <fdtdec.h> #include <asm/gpio.h> #include <asm/io.h> #include <asm/errno.h> +#include <malloc.h> + +DECLARE_GLOBAL_DATA_PTR;
#define OMAP_GPIO_DIR_OUT 0 #define OMAP_GPIO_DIR_IN 1 @@ -34,7 +38,6 @@ struct gpio_bank { /* TODO(sjg@chromium.org): Can we use a struct here? */ void *base; /* address of registers in physical memory */ - enum gpio_method method; };
#endif @@ -55,13 +58,8 @@ static void _set_gpio_direction(const struct gpio_bank *bank, int gpio, void *reg = bank->base; u32 l;
- switch (bank->method) { - case METHOD_GPIO_24XX: - reg += OMAP_GPIO_OE; - break; - default: - return; - } + reg += OMAP_GPIO_OE; + l = __raw_readl(reg); if (is_input) l |= 1 << gpio; @@ -79,13 +77,7 @@ static int _get_gpio_direction(const struct gpio_bank *bank, int gpio) void *reg = bank->base; u32 v;
- switch (bank->method) { - case METHOD_GPIO_24XX: - reg += OMAP_GPIO_OE; - break; - default: - return -1; - } + reg += OMAP_GPIO_OE;
v = __raw_readl(reg);
@@ -101,19 +93,12 @@ static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio, void *reg = bank->base; u32 l = 0;
- switch (bank->method) { - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP_GPIO_SETDATAOUT; - else - reg += OMAP_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; - default: - printf("omap3-gpio unknown bank method %s %d\n", - __FILE__, __LINE__); - return; - } + if (enable) + reg += OMAP_GPIO_SETDATAOUT; + else + reg += OMAP_GPIO_CLEARDATAOUT; + + l = 1 << gpio; __raw_writel(l, reg); }
@@ -122,19 +107,13 @@ static int _get_gpio_value(const struct gpio_bank *bank, int gpio) void *reg = bank->base; int input;
- switch (bank->method) { - case METHOD_GPIO_24XX: - input = _get_gpio_direction(bank, gpio); - switch (input) { - case OMAP_GPIO_DIR_IN: - reg += OMAP_GPIO_DATAIN; - break; - case OMAP_GPIO_DIR_OUT: - reg += OMAP_GPIO_DATAOUT; - break; - default: - return -1; - } + input = _get_gpio_direction(bank, gpio); + switch (input) { + case OMAP_GPIO_DIR_IN: + reg += OMAP_GPIO_DATAIN; + break; + case OMAP_GPIO_DIR_OUT: + reg += OMAP_GPIO_DATAOUT; break; default: return -1; @@ -310,24 +289,56 @@ static int omap_gpio_probe(struct udevice *dev) struct gpio_bank *bank = dev_get_priv(dev); struct omap_gpio_platdata *plat = dev_get_platdata(dev); struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); - char name[18], *str;
- sprintf(name, "GPIO%d_", plat->bank_index); - str = strdup(name); - if (!str) - return -ENOMEM; - uc_priv->bank_name = str; + uc_priv->bank_name = plat->port_name; uc_priv->gpio_count = GPIO_PER_BANK; bank->base = (void *)plat->base; - bank->method = plat->method;
return 0; }
+static int omap_gpio_bind(struct udevice *dev) +{ + struct omap_gpio_platdata *plat = dev->platdata; + fdt_addr_t base_addr; + + if (plat) + return 0; + + base_addr = dev_get_addr(dev); + if (base_addr == FDT_ADDR_T_NONE) + return -ENODEV; + + /* + * TODO: + * When every board is converted to driver model and DT is + * supported, this can be done by auto-alloc feature, but + * not using calloc to alloc memory for platdata. + */ + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + + plat->base = base_addr; + plat->port_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL); + dev->platdata = plat; + + return 0; +} + +static const struct udevice_id omap_gpio_ids[] = { + { .compatible = "ti,omap3-gpio" }, + { .compatible = "ti,omap4-gpio" }, + { .compatible = "ti,am4372-gpio" }, + { } +}; + U_BOOT_DRIVER(gpio_omap) = { .name = "gpio_omap", .id = UCLASS_GPIO, .ops = &gpio_omap_ops, + .of_match = omap_gpio_ids, + .bind = omap_gpio_bind, .probe = omap_gpio_probe, .priv_auto_alloc_size = sizeof(struct gpio_bank), };
On Fri, Jul 31, 2015 at 07:55:09PM -0400, Tom Rini wrote:
The "method" parameter was part of the original port of the driver from the kernel. At some point this may have been added to allow for future differentiation (as omap1 and omap2 have different GPIO IP blocks, so this wasn't an unreasonable thing to do). At this point however it's just extra overhead, so drop.
Signed-off-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
We now have the CONFIG_SPL_DM for code within SPL to toggle caring about DM or not. Without this change platforms that do enable CONFIG_DM but not CONFIG_SPL_DM may be broken (such as OMAP5).
Cc: Albert Aribaud albert.u.boot@aribaud.net Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/cpu/armv7/lowlevel_init.S | 2 +- arch/arm/lib/spl.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index 427b0b1..1872c57 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -21,7 +21,7 @@ ENTRY(lowlevel_init) */ ldr sp, =CONFIG_SYS_INIT_SP_ADDR bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ -#ifdef CONFIG_DM +#ifdef CONFIG_SPL_DM mov r9, #0 #else /* diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c index bd8c7d2..d737a5c 100644 --- a/arch/arm/lib/spl.c +++ b/arch/arm/lib/spl.c @@ -13,7 +13,7 @@ #include <image.h> #include <linux/compiler.h>
-#ifndef CONFIG_DM +#ifndef CONFIG_SPL_DM /* Pointer to as well as the global data structure for SPL */ DECLARE_GLOBAL_DATA_PTR;
@@ -35,7 +35,7 @@ void __weak board_init_f(ulong dummy) /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start);
-#ifndef CONFIG_DM +#ifndef CONFIG_SPL_DM /* TODO: Remove settings of the global data pointer here */ gd = &gdata; #endif
On Fri, Jul 31, 2015 at 07:55:10PM -0400, Tom Rini wrote:
We now have the CONFIG_SPL_DM for code within SPL to toggle caring about DM or not. Without this change platforms that do enable CONFIG_DM but not CONFIG_SPL_DM may be broken (such as OMAP5).
Cc: Albert Aribaud albert.u.boot@aribaud.net Signed-off-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
- Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and into Kconfig proper. - While in here, enable CONFIG_SPL_STACK_ADDR
Signed-off-by: Tom Rini trini@konsulko.com --- board/ti/dra7xx/Kconfig | 8 ++++++++ configs/dra7xx_evm_defconfig | 3 ++- configs/dra7xx_evm_qspiboot_defconfig | 4 +++- configs/dra7xx_evm_uart3_defconfig | 5 ++++- 4 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/board/ti/dra7xx/Kconfig b/board/ti/dra7xx/Kconfig index 3bbd866..80341d9 100644 --- a/board/ti/dra7xx/Kconfig +++ b/board/ti/dra7xx/Kconfig @@ -9,4 +9,12 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "dra7xx_evm"
+config CONS_INDEX + int "UART used for console" + range 1 6 + default 1 + help + The DRA7xx (and AM57x) SoC has a total of 6 UARTs available to it. + Depending on your specific board you may want something other than UART1 + here. endif diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 463a7e2..f98e7b7 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -2,7 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig index 90e3cf4..f14fa62 100644 --- a/configs/dra7xx_evm_qspiboot_defconfig +++ b/configs/dra7xx_evm_qspiboot_defconfig @@ -2,7 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,QSPI_BOOT" +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig index 474cada..8882260 100644 --- a/configs/dra7xx_evm_uart3_defconfig +++ b/configs/dra7xx_evm_uart3_defconfig @@ -1,8 +1,11 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y +CONFIG_CONS_INDEX=3 CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3,SPL_YMODEM_SUPPORT" +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set
On Fri, Jul 31, 2015 at 07:55:11PM -0400, Tom Rini wrote:
- Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and into Kconfig proper.
- While in here, enable CONFIG_SPL_STACK_ADDR
Signed-off-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel v4.1 - Add config file for this board, enable DM and DM_GPIO
Cc: Simon Glass sjg@chromium.org Signed-off-by: Tom Rini trini@konsulko.com
--- For some reason I can't yet figure out, enabling CONFIG_DM_SERIAL seems to be triggering the no console panic failure path, but I can't seem to figure out why. --- arch/arm/dts/Makefile | 1 + arch/arm/dts/dra7.dtsi | 1529 ++++++++++++++++++++++++ arch/arm/dts/dra72-evm.dts | 683 +++++++++++ arch/arm/dts/dra72x.dtsi | 47 + arch/arm/dts/dra7xx-clocks.dtsi | 2149 ++++++++++++++++++++++++++++++++++ arch/arm/dts/omap4-cpu-thermal.dtsi | 41 + arch/arm/dts/omap5-core-thermal.dtsi | 28 + arch/arm/dts/omap5-gpu-thermal.dtsi | 28 + configs/dra72_evm_defconfig | 17 + drivers/serial/serial_omap.c | 1 + include/dt-bindings/pinctrl/dra.h | 51 + 11 files changed, 4575 insertions(+) create mode 100644 arch/arm/dts/dra7.dtsi create mode 100644 arch/arm/dts/dra72-evm.dts create mode 100644 arch/arm/dts/dra72x.dtsi create mode 100644 arch/arm/dts/dra7xx-clocks.dtsi create mode 100644 arch/arm/dts/omap4-cpu-thermal.dtsi create mode 100644 arch/arm/dts/omap5-core-thermal.dtsi create mode 100644 arch/arm/dts/omap5-gpu-thermal.dtsi create mode 100644 configs/dra72_evm_defconfig create mode 100644 include/dt-bindings/pinctrl/dra.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 43b1616..ca5e444 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_socrates.dtb +dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \ diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi new file mode 100644 index 0000000..8f1e25b --- /dev/null +++ b/arch/arm/dts/dra7.dtsi @@ -0,0 +1,1529 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/dra.h> + +#include "skeleton.dtsi" + +#define MAX_SOURCES 400 + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "ti,dra7xx"; + interrupt-parent = <&crossbar_mpu>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + i2c4 = &i2c5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + serial8 = &uart9; + serial9 = &uart10; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; + d_can0 = &dcan1; + d_can1 = &dcan2; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>, + <0x48214000 0x2000>, + <0x48216000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the SOC interconnect. + * The real OMAP interconnect network is quite complex. + * Since it will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,dra7-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2"; + reg = <0x44000000 0x1000000>, + <0x45000000 0x1000>; + interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l4_cfg: l4@4a000000 { + compatible = "ti,dra7-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x22c000>; + + scm: scm@2000 { + compatible = "ti,dra7-scm-core", "simple-bus"; + reg = <0x2000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x1400>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0xe00 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + + scm_conf_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + dra7_pmx_core: pinmux@1400 { + compatible = "ti,dra7-padconf", + "pinctrl-single"; + reg = <0x1400 0x0464>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + }; + + cm_core_aon: cm_core_aon@5000 { + compatible = "ti,dra7-cm-core-aon"; + reg = <0x5000 0x2000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + + cm_core: cm_core@8000 { + compatible = "ti,dra7-cm-core"; + reg = <0x8000 0x3000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; + }; + }; + + l4_wkup: l4@4ae00000 { + compatible = "ti,dra7-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4ae00000 0x3f000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x40>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,dra7-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + axi@0 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51000000 0x51000000 0x3000 + 0x0 0x20000000 0x10000000>; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 232 0x4>, <0 233 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie1"; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 1>, + <0 0 0 2 &pcie1_intc 2>, + <0 0 0 3 &pcie1_intc 3>, + <0 0 0 4 &pcie1_intc 4>; + pcie1_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + axi@1 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51800000 0x51800000 0x3000 + 0x0 0x30000000 0x10000000>; + status = "disabled"; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 355 0x4>, <0 356 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie2"; + phys = <&pcie2_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 1>, + <0 0 0 2 &pcie2_intc 2>, + <0 0 0 3 &pcie2_intc 3>, + <0 0 0 4 &pcie2_intc 4>; + pcie2_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + bandgap: bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c + 0x4a002564 0x8 + 0x4a002574 0x50>; + compatible = "ti,dra752-bandgap"; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + + dra7_ctrl_core: ctrl_core@4a002000 { + compatible = "syscon"; + reg = <0x4a002000 0x6d0>; + }; + + dra7_ctrl_general: tisyscon@4a002e00 { + compatible = "syscon"; + reg = <0x4a002e00 0x7c>; + }; + + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + + gpio1: gpio@4ae10000 { + compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@48051000 { + compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio7"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio8: gpio@48053000 { + compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio8"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart1: serial@4806a000 { + compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma 49>, <&sdma 50>; + dma-names = "tx", "rx"; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma 51>, <&sdma 52>; + dma-names = "tx", "rx"; + }; + + uart3: serial@48020000 { + compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma 53>, <&sdma 54>; + dma-names = "tx", "rx"; + }; + + uart4: serial@4806e000 { + compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma 55>, <&sdma 56>; + dma-names = "tx", "rx"; + }; + + uart5: serial@48066000 { + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma 63>, <&sdma 64>; + dma-names = "tx", "rx"; + }; + + uart6: serial@48068000 { + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma 79>, <&sdma 80>; + dma-names = "tx", "rx"; + }; + + uart7: serial@48420000 { + compatible = "ti,omap4-uart"; + reg = <0x48420000 0x100>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart7"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart8: serial@48422000 { + compatible = "ti,omap4-uart"; + reg = <0x48422000 0x100>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart8"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart9: serial@48424000 { + compatible = "ti,omap4-uart"; + reg = <0x48424000 0x100>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart9"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart10: serial@4ae2b000 { + compatible = "ti,omap4-uart"; + reg = <0x4ae2b000 0x100>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart10"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + mailbox1: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox1"; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + status = "disabled"; + }; + + mailbox2: mailbox@4883a000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883a000 0x200>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox2"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox3: mailbox@4883c000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883c000 0x200>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox3"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox4: mailbox@4883e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883e000 0x200>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox4"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox5: mailbox@48840000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48840000 0x200>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox5"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox6: mailbox@48842000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48842000 0x200>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox6"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox7: mailbox@48844000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48844000 0x200>; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox7"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox8: mailbox@48846000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48846000 0x200>; + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox8"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox9: mailbox@4885e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4885e000 0x200>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox9"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox10: mailbox@48860000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48860000 0x200>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox10"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox11: mailbox@48862000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48862000 0x200>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox11"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox12: mailbox@48864000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48864000 0x200>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox12"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox13: mailbox@48802000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48802000 0x200>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox13"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + timer1: timer@4ae18000 { + compatible = "ti,omap5430-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap5430-timer"; + reg = <0x48032000 0x80>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap5430-timer"; + reg = <0x48034000 0x80>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap5430-timer"; + reg = <0x48036000 0x80>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer4"; + }; + + timer5: timer@48820000 { + compatible = "ti,omap5430-timer"; + reg = <0x48820000 0x80>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer5"; + }; + + timer6: timer@48822000 { + compatible = "ti,omap5430-timer"; + reg = <0x48822000 0x80>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer6"; + }; + + timer7: timer@48824000 { + compatible = "ti,omap5430-timer"; + reg = <0x48824000 0x80>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer7"; + }; + + timer8: timer@48826000 { + compatible = "ti,omap5430-timer"; + reg = <0x48826000 0x80>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer8"; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap5430-timer"; + reg = <0x4803e000 0x80>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap5430-timer"; + reg = <0x48086000 0x80>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap5430-timer"; + reg = <0x48088000 0x80>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer11"; + }; + + timer13: timer@48828000 { + compatible = "ti,omap5430-timer"; + reg = <0x48828000 0x80>; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer13"; + status = "disabled"; + }; + + timer14: timer@4882a000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882a000 0x80>; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer14"; + status = "disabled"; + }; + + timer15: timer@4882c000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882c000 0x80>; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer15"; + status = "disabled"; + }; + + timer16: timer@4882e000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882e000 0x80>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer16"; + status = "disabled"; + }; + + wdt2: wdt@4ae14000 { + compatible = "ti,omap3-wdt"; + reg = <0x4ae14000 0x80>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "wd_timer2"; + }; + + hwspinlock: spinlock@4a0f6000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x4a0f6000 0x1000>; + ti,hwmods = "spinlock"; + #hwlock-cells = <1>; + }; + + dmm@4e000000 { + compatible = "ti,omap5-dmm"; + reg = <0x4e000000 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dmm"; + }; + + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + status = "disabled"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + status = "disabled"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + status = "disabled"; + }; + + i2c4: i2c@4807a000 { + compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + status = "disabled"; + }; + + i2c5: i2c@4807c000 { + compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + status = "disabled"; + }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + status = "disabled"; + pbias-supply = <&pbias_mmc_reg>; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v3"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, + <0x4ae06014 0x4>, <0x4a003b20 0xc>, + <0x4ae0c158 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1160000 0 0x4 0 0x02000000 0x01F00000 + 1210000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + abb_ivahd: regulator-abb-ivahd { + compatible = "ti,abb-v3"; + regulator-name = "abb_ivahd"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, + <0x4ae06010 0x4>, <0x4a0025cc 0xc>, + <0x4a002470 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x40000000>; + /* LDOVBBIVA_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBIVA_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1055000 0 0x0 0 0x02000000 0x01F00000 + 1150000 0 0x4 0 0x02000000 0x01F00000 + 1250000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + abb_dspeve: regulator-abb-dspeve { + compatible = "ti,abb-v3"; + regulator-name = "abb_dspeve"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, + <0x4ae06010 0x4>, <0x4a0025e0 0xc>, + <0x4a00246c 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x20000000>; + /* LDOVBBDSPEVE_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBDSPEVE_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1055000 0 0x0 0 0x02000000 0x01F00000 + 1150000 0 0x4 0 0x02000000 0x01F00000 + 1250000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + abb_gpu: regulator-abb-gpu { + compatible = "ti,abb-v3"; + regulator-name = "abb_gpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, + <0x4ae06010 0x4>, <0x4a003b08 0xc>, + <0x4ae0c154 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x10000000>; + /* LDOVBBGPU_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBGPU_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1090000 0 0x0 0 0x02000000 0x01F00000 + 1210000 0 0x4 0 0x02000000 0x01F00000 + 1280000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + status = "disabled"; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + + qspi: qspi@4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>; + reg-names = "qspi_base"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "qspi"; + clocks = <&qspi_gfclk_div>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a090000 0x20>; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; + #phy-cells = <0>; + }; + + pcie1_phy: pciephy@4a094000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4a094000 0x80>, /* phy_rx */ + <0x4a094400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + ctrl-module = <&omap_control_pcie1phy>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&optfclk_pciephy1_32khz>, + <&optfclk_pciephy1_clk>, + <&optfclk_pciephy1_div_clk>, + <&optfclk_pciephy_div>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div"; + #phy-cells = <0>; + }; + + pcie2_phy: pciephy@4a095000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4a095000 0x80>, /* phy_rx */ + <0x4a095400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + ctrl-module = <&omap_control_pcie2phy>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&optfclk_pciephy2_32khz>, + <&optfclk_pciephy2_clk>, + <&optfclk_pciephy2_div_clk>, + <&optfclk_pciephy_div>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; + + omap_control_pcie1phy: control-phy@0x4a003c40 { + compatible = "ti,control-phy-pcie"; + reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; + reg-names = "power", "control_sma", "pcie_pcs"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + omap_control_pcie2phy: control-pcie@0x4a003c44 { + compatible = "ti,control-phy-pcie"; + reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; + reg-names = "power", "control_sma", "pcie_pcs"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + status = "disabled"; + }; + + rtc: rtc@48838000 { + compatible = "ti,am3352-rtc"; + reg = <0x48838000 0x100>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "rtcss"; + clocks = <&sys_32k_ck>; + }; + + omap_control_usb2phy1: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usb3phy1: control-phy@4a002370 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002370 0x4>; + reg-names = "power"; + }; + + omap_control_usb2phy2: control-phy@0x4a002e74 { + compatible = "ti,control-phy-usb2-dra7"; + reg = <0x4a002e74 0x4>; + reg-names = "power"; + }; + + /* OCP2SCP1 */ + ocp2scp@4a080000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a080000 0x20>; + ti,hwmods = "ocp2scp1"; + + usb2_phy1: phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x400>; + ctrl-module = <&omap_control_usb2phy1>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb2_phy2: phy@4a085000 { + compatible = "ti,omap-usb2"; + reg = <0x4a085000 0x400>; + ctrl-module = <&omap_control_usb2phy2>; + clocks = <&usb_phy2_always_on_clk32k>, + <&usb_otg_ss2_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb3_phy1: phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb3phy1>; + clocks = <&usb_phy3_always_on_clk32k>, + <&sys_clkin1>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + + omap_dwc3_1: omap_dwc3_1@48880000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x48880000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb1: usb@48890000 { + compatible = "snps,dwc3"; + reg = <0x48890000 0x17000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + maximum-speed = "super-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + + omap_dwc3_2: omap_dwc3_2@488c0000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss2"; + reg = <0x488c0000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb2: usb@488d0000 { + compatible = "snps,dwc3"; + reg = <0x488d0000 0x17000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + + /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ + omap_dwc3_3: omap_dwc3_3@48900000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss3"; + reg = <0x48900000 0x10000>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb3: usb@48910000 { + compatible = "snps,dwc3"; + reg = <0x48910000 0x17000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + + elm: elm@48078000 { + compatible = "ti,am3352-elm"; + reg = <0x48078000 0xfc0>; /* device IO registers */ + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "elm"; + status = "disabled"; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x37c>; /* device IO registers */ + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; + + atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; + }; + + crossbar_mpu: crossbar@4a002a48 { + compatible = "ti,irq-crossbar"; + reg = <0x4a002a48 0x130>; + interrupt-controller; + interrupt-parent = <&wakeupgen>; + #interrupt-cells = <3>; + ti,max-irqs = <160>; + ti,max-crossbar-sources = <MAX_SOURCES>; + ti,reg-size = <2>; + ti,irqs-reserved = <0 1 2 3 5 6 131 132>; + ti,irqs-skip = <10 133 139 140>; + ti,irqs-safe-map = <0>; + }; + + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "gmac"; + clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x48484000 0x1000 + 0x48485200 0x2E00>; + #address-cells = <1>; + #size-cells = <1>; + /* + * rx_thresh_pend + * rx_pend + * tx_pend + * misc_pend + */ + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + ranges; + status = "disabled"; + + davinci_mdio: mdio@48485000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x48485000 0x100>; + }; + + cpsw_emac0: slave@48480200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@48480300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + phy_sel: cpsw-phy-sel@4a002554 { + compatible = "ti,dra7xx-cpsw-phy-sel"; + reg= <0x4a002554 0x4>; + reg-names = "gmii-sel"; + }; + }; + + dcan1: can@481cc000 { + compatible = "ti,dra7-d_can"; + ti,hwmods = "dcan1"; + reg = <0x4ae3c000 0x2000>; + syscon-raminit = <&scm_conf 0x558 0>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dcan1_sys_clk_mux>; + status = "disabled"; + }; + + dcan2: can@481d0000 { + compatible = "ti,dra7-d_can"; + ti,hwmods = "dcan2"; + reg = <0x48480000 0x2000>; + syscon-raminit = <&scm_conf 0x558 1>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clkin1>; + status = "disabled"; + }; + + dss: dss@58000000 { + compatible = "ti,dra7-dss"; + /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ + /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ + status = "disabled"; + ti,hwmods = "dss_core"; + /* CTRL_CORE_DSS_PLL_CONTROL */ + syscon-pll-ctrl = <&scm_conf 0x538>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@58001000 { + compatible = "ti,dra7-dispc"; + reg = <0x58001000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + /* CTRL_CORE_SMA_SW_1 */ + syscon-pol = <&scm_conf 0x534>; + }; + + hdmi: encoder@58060000 { + compatible = "ti,dra7-hdmi"; + reg = <0x58040000 0x200>, + <0x58040200 0x80>, + <0x58040300 0x80>, + <0x58060000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_hdmi"; + clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>; + clock-names = "fck", "sys_clk"; + }; + }; + }; + + thermal_zones: thermal-zones { + #include "omap4-cpu-thermal.dtsi" + #include "omap5-gpu-thermal.dtsi" + #include "omap5-core-thermal.dtsi" + }; + +}; + +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ +}; + +/include/ "dra7xx-clocks.dtsi" diff --git a/arch/arm/dts/dra72-evm.dts b/arch/arm/dts/dra72-evm.dts new file mode 100644 index 0000000..efb544c --- /dev/null +++ b/arch/arm/dts/dra72-evm.dts @@ -0,0 +1,683 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "TI DRA722"; + compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; + + chosen { + stdout-path = &uart1; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1024 MB */ + }; + + aliases { + display0 = &hdmi0; + }; + + evm_3v3: fixedregulator-evm_3v3 { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ + <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + + nand_default: nand_default { + pinctrl-single,pins = < + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ + 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + usb2_pins: pinmux_usb2_pins { + pinctrl-single,pins = < + 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + >; + }; + + tps65917_pins_default: tps65917_pins_default { + pinctrl-single,pins = < + 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ + >; + }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ + >; + }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + >; + }; + + hdmi_pins: pinmux_hdmi_pins { + pinctrl-single,pins = < + 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + pinctrl-names = "default"; + pinctrl-0 = <&tps65917_pins_default>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1060000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; + }; + + pcf_gpio_21: gpio@21 { + compatible = "ti,pcf8575"; + reg = <0x21>; + lines-initial-states = <0x1408>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&i2c5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + + pcf_hdmi: pcf8575@26 { + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + /* + * initial state is used here to keep the mdio interface + * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and + * VIN2_S0 driven high otherwise Ethernet stops working + * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 + */ + lines-initial-states = <0x0f2b>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_default>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + /* To use NAND, DIP switch SW5 must be set like so: + * SW5.1 (NAND_SELn) = ON (LOW) + * SW5.9 (GPMC_WPN) = OFF (HIGH) + */ + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <80>; + gpmc,cs-wr-off-ns = <80>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <60>; + gpmc,adv-wr-off-ns = <60>; + gpmc,we-on-ns = <10>; + gpmc,we-off-ns = <50>; + gpmc,oe-on-ns = <4>; + gpmc,oe-off-ns = <40>; + gpmc,access-ns = <40>; + gpmc,wr-access-ns = <80>; + gpmc,rd-cycle-ns = <80>; + gpmc,wr-cycle-ns = <80>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000c0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001c0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x001e0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x0f600000>; + }; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&usb1 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&usb2 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; + /* + * SDCD signal is not being used here - using the fact that GPIO mode + * is a viable alternative + */ + cd-gpios = <&gpio6 27 0>; +}; + +&mmc2 { + /* SW5-3 in ON position */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + + vmmc-supply = <&evm_3v3>; + bus-width = <8>; + ti,non-removable; +}; + +&dra7_pmx_core { + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 2 */ + 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + >; + + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 2 */ + 0x198 (MUX_MODE15) + 0x19c (MUX_MODE15) + 0x1a0 (MUX_MODE15) + 0x1a4 (MUX_MODE15) + 0x1a8 (MUX_MODE15) + 0x1ac (MUX_MODE15) + 0x1b0 (MUX_MODE15) + 0x1b4 (MUX_MODE15) + 0x1b8 (MUX_MODE15) + 0x1bc (MUX_MODE15) + 0x1c0 (MUX_MODE15) + 0x1c4 (MUX_MODE15) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + 0x23c (MUX_MODE15) + 0x240 (MUX_MODE15) + >; + }; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + active_slave = <1>; +}; + +&dcan1 { + status = "ok"; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; + pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; + +&dss { + status = "ok"; + + vdda_video-supply = <&ldo5_reg>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo3_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/dts/dra72x.dtsi b/arch/arm/dts/dra72x.dtsi new file mode 100644 index 0000000..eaca143 --- /dev/null +++ b/arch/arm/dts/dra72x.dtsi @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra722", "ti,dra72", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&wakeupgen>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&dss { + reg = <0x58000000 0x80>, + <0x58004054 0x4>, + <0x58004300 0x20>; + reg-names = "dss", "pll1_clkctrl", "pll1"; + + clocks = <&dss_dss_clk>, + <&dss_video1_clk>; + clock-names = "fck", "video1_clk"; +}; diff --git a/arch/arm/dts/dra7xx-clocks.dtsi b/arch/arm/dts/dra7xx-clocks.dtsi new file mode 100644 index 0000000..357bede --- /dev/null +++ b/arch/arm/dts/dra7xx-clocks.dtsi @@ -0,0 +1,2149 @@ +/* + * Device Tree Source for DRA7xx clock data + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +&cm_core_aon_clocks { + atl_clkin0_ck: atl_clkin0_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; + }; + + atl_clkin1_ck: atl_clkin1_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; + }; + + atl_clkin2_ck: atl_clkin2_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; + }; + + atl_clkin3_ck: atl_clkin3_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; + }; + + hdmi_clkin_ck: hdmi_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + mlb_clkin_ck: mlb_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + mlbp_clkin_ck: mlbp_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + pciesref_acs_clk_ck: pciesref_acs_clk_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + ref_clkin0_ck: ref_clkin0_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ref_clkin1_ck: ref_clkin1_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ref_clkin2_ck: ref_clkin2_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ref_clkin3_ck: ref_clkin3_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + rmii_clk_ck: rmii_clk_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + sdvenc_clkin_ck: sdvenc_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + secure_32k_clk_src_ck: secure_32k_clk_src_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + virt_12000000_ck: virt_12000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + virt_13000000_ck: virt_13000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + virt_16800000_ck: virt_16800000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16800000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_20000000_ck: virt_20000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + virt_26000000_ck: virt_26000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + virt_27000000_ck: virt_27000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; + + virt_38400000_ck: virt_38400000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <38400000>; + }; + + sys_clkin2: sys_clkin2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <22579200>; + }; + + usb_otg_clkin_ck: usb_otg_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + video1_clkin_ck: video1_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + video1_m2_clkin_ck: video1_m2_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + video2_clkin_ck: video2_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + video2_m2_clkin_ck: video2_m2_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + dpll_abe_ck: dpll_abe_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-m4xen-clock"; + clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; + reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; + }; + + dpll_abe_x2_ck: dpll_abe_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_abe_ck>; + }; + + dpll_abe_m2x2_ck: dpll_abe_m2x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01f0>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + abe_clk: abe_clk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2x2_ck>; + ti,max-div = <4>; + reg = <0x0108>; + ti,index-power-of-two; + }; + + dpll_abe_m2_ck: dpll_abe_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01f0>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_abe_m3x2_ck: dpll_abe_m3x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01f4>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + + dpll_core_ck: dpll_core_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-core-clock"; + clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; + reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; + }; + + dpll_core_x2_ck: dpll_core_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_core_ck>; + }; + + dpll_core_h12x2_ck: dpll_core_h12x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x013c>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_h12x2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_mpu_ck: dpll_mpu_ck { + #clock-cells = <0>; + compatible = "ti,omap5-mpu-dpll-clock"; + clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; + reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; + }; + + dpll_mpu_m2_ck: dpll_mpu_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_mpu_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0170>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + mpu_dclk_div: mpu_dclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_mpu_m2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_h12x2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_dsp_byp_mux: dpll_dsp_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0240>; + }; + + dpll_dsp_ck: dpll_dsp_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; + reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; + }; + + dpll_dsp_m2_ck: dpll_dsp_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_dsp_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0244>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_h12x2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + + dpll_iva_ck: dpll_iva_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; + reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + }; + + dpll_iva_m2_ck: dpll_iva_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_iva_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01b0>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + iva_dclk: iva_dclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_iva_m2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_gpu_byp_mux: dpll_gpu_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02e4>; + }; + + dpll_gpu_ck: dpll_gpu_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; + reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; + }; + + dpll_gpu_m2_ck: dpll_gpu_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gpu_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x02e8>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_core_m2_ck: dpll_core_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0130>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + core_dpll_out_dclk_div: core_dpll_out_dclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_ddr_byp_mux: dpll_ddr_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x021c>; + }; + + dpll_ddr_ck: dpll_ddr_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; + reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; + }; + + dpll_ddr_m2_ck: dpll_ddr_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_ddr_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0220>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_gmac_byp_mux: dpll_gmac_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02b4>; + }; + + dpll_gmac_ck: dpll_gmac_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; + reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; + }; + + dpll_gmac_m2_ck: dpll_gmac_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x02b8>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + video2_dclk_div: video2_dclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&video2_m2_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + video1_dclk_div: video1_dclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&video1_m2_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + hdmi_dclk_div: hdmi_dclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&hdmi_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + per_dpll_hs_clk_div: per_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m3x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m3x2_ck>; + clock-mult = <1>; + clock-div = <3>; + }; + + eve_dpll_hs_clk_div: eve_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_h12x2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_eve_byp_mux: dpll_eve_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0290>; + }; + + dpll_eve_ck: dpll_eve_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; + reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; + }; + + dpll_eve_m2_ck: dpll_eve_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_eve_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0294>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + eve_dclk_div: eve_dclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_eve_m2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_core_h13x2_ck: dpll_core_h13x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0140>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_core_h14x2_ck: dpll_core_h14x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0144>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_core_h22x2_ck: dpll_core_h22x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0154>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_core_h23x2_ck: dpll_core_h23x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0158>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_core_h24x2_ck: dpll_core_h24x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x015c>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_ddr_x2_ck: dpll_ddr_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_ddr_ck>; + }; + + dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_ddr_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0228>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_dsp_x2_ck: dpll_dsp_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_dsp_ck>; + }; + + dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_dsp_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0248>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_gmac_x2_ck: dpll_gmac_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_gmac_ck>; + }; + + dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x02c0>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x02c4>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x02c8>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x02bc>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + gmii_m_clk_div: gmii_m_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_gmac_h11x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + hdmi_clk2_div: hdmi_clk2_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&hdmi_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + hdmi_div_clk: hdmi_div_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&hdmi_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l3_iclk_div: l3_iclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; + clocks = <&dpll_core_h12x2_ck>; + ti,index-power-of-two; + }; + + l4_root_clk_div: l4_root_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&l3_iclk_div>; + clock-mult = <1>; + clock-div = <2>; + }; + + video1_clk2_div: video1_clk2_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&video1_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + video1_div_clk: video1_div_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&video1_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + video2_clk2_div: video2_clk2_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&video2_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + video2_div_clk: video2_div_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&video2_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + ipu1_gfclk_mux: ipu1_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; + ti,bit-shift = <24>; + reg = <0x0520>; + }; + + mcasp1_ahclkr_mux: mcasp1_ahclkr_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <28>; + reg = <0x0550>; + }; + + mcasp1_ahclkx_mux: mcasp1_ahclkx_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <24>; + reg = <0x0550>; + }; + + mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <22>; + reg = <0x0550>; + }; + + timer5_gfclk_mux: timer5_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; + ti,bit-shift = <24>; + reg = <0x0558>; + }; + + timer6_gfclk_mux: timer6_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; + ti,bit-shift = <24>; + reg = <0x0560>; + }; + + timer7_gfclk_mux: timer7_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; + ti,bit-shift = <24>; + reg = <0x0568>; + }; + + timer8_gfclk_mux: timer8_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; + ti,bit-shift = <24>; + reg = <0x0570>; + }; + + uart6_gfclk_mux: uart6_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x0580>; + }; + + dummy_ck: dummy_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; +&prm_clocks { + sys_clkin1: sys_clkin1 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; + reg = <0x0110>; + ti,index-starts-at-one; + }; + + abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&sys_clkin2>; + reg = <0x0118>; + }; + + abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; + reg = <0x0114>; + }; + + abe_dpll_clk_mux: abe_dpll_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; + reg = <0x010c>; + }; + + abe_24m_fclk: abe_24m_fclk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2x2_ck>; + reg = <0x011c>; + ti,dividers = <8>, <16>; + }; + + aess_fclk: aess_fclk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&abe_clk>; + reg = <0x0178>; + ti,max-div = <2>; + }; + + abe_giclk_div: abe_giclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&aess_fclk>; + reg = <0x0174>; + ti,max-div = <2>; + }; + + abe_lp_clk_div: abe_lp_clk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2x2_ck>; + reg = <0x01d8>; + ti,dividers = <16>, <32>; + }; + + abe_sys_clk_div: abe_sys_clk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin1>; + reg = <0x0120>; + ti,max-div = <2>; + }; + + adc_gfclk_mux: adc_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; + reg = <0x01dc>; + }; + + sys_clk1_dclk_div: sys_clk1_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin1>; + ti,max-div = <64>; + reg = <0x01c8>; + ti,index-power-of-two; + }; + + sys_clk2_dclk_div: sys_clk2_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin2>; + ti,max-div = <64>; + reg = <0x01cc>; + ti,index-power-of-two; + }; + + per_abe_x1_dclk_div: per_abe_x1_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2_ck>; + ti,max-div = <64>; + reg = <0x01bc>; + ti,index-power-of-two; + }; + + dsp_gclk_div: dsp_gclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_dsp_m2_ck>; + ti,max-div = <64>; + reg = <0x018c>; + ti,index-power-of-two; + }; + + gpu_dclk: gpu_dclk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gpu_m2_ck>; + ti,max-div = <64>; + reg = <0x01a0>; + ti,index-power-of-two; + }; + + emif_phy_dclk_div: emif_phy_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_ddr_m2_ck>; + ti,max-div = <64>; + reg = <0x0190>; + ti,index-power-of-two; + }; + + gmac_250m_dclk_div: gmac_250m_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_m2_ck>; + ti,max-div = <64>; + reg = <0x019c>; + ti,index-power-of-two; + }; + + l3init_480m_dclk_div: l3init_480m_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_m2_ck>; + ti,max-div = <64>; + reg = <0x01ac>; + ti,index-power-of-two; + }; + + usb_otg_dclk_div: usb_otg_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&usb_otg_clkin_ck>; + ti,max-div = <64>; + reg = <0x0184>; + ti,index-power-of-two; + }; + + sata_dclk_div: sata_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin1>; + ti,max-div = <64>; + reg = <0x01c0>; + ti,index-power-of-two; + }; + + pcie2_dclk_div: pcie2_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_pcie_ref_m2_ck>; + ti,max-div = <64>; + reg = <0x01b8>; + ti,index-power-of-two; + }; + + pcie_dclk_div: pcie_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&apll_pcie_m2_ck>; + ti,max-div = <64>; + reg = <0x01b4>; + ti,index-power-of-two; + }; + + emu_dclk_div: emu_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin1>; + ti,max-div = <64>; + reg = <0x0194>; + ti,index-power-of-two; + }; + + secure_32k_dclk_div: secure_32k_dclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&secure_32k_clk_src_ck>; + ti,max-div = <64>; + reg = <0x01c4>; + ti,index-power-of-two; + }; + + clkoutmux0_clk_mux: clkoutmux0_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; + reg = <0x0158>; + }; + + clkoutmux1_clk_mux: clkoutmux1_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; + reg = <0x015c>; + }; + + clkoutmux2_clk_mux: clkoutmux2_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; + reg = <0x0160>; + }; + + custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin1>; + clock-mult = <1>; + clock-div = <2>; + }; + + eve_clk: eve_clk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; + reg = <0x0180>; + }; + + hdmi_dpll_clk_mux: hdmi_dpll_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&sys_clkin2>; + reg = <0x0164>; + }; + + mlb_clk: mlb_clk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&mlb_clkin_ck>; + ti,max-div = <64>; + reg = <0x0134>; + ti,index-power-of-two; + }; + + mlbp_clk: mlbp_clk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&mlbp_clkin_ck>; + ti,max-div = <64>; + reg = <0x0130>; + ti,index-power-of-two; + }; + + per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2_ck>; + ti,max-div = <64>; + reg = <0x0138>; + ti,index-power-of-two; + }; + + timer_sys_clk_div: timer_sys_clk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin1>; + reg = <0x0144>; + ti,max-div = <2>; + }; + + video1_dpll_clk_mux: video1_dpll_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&sys_clkin2>; + reg = <0x0168>; + }; + + video2_dpll_clk_mux: video2_dpll_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&sys_clkin2>; + reg = <0x016c>; + }; + + wkupaon_iclk_mux: wkupaon_iclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&abe_lp_clk_div>; + reg = <0x0108>; + }; + + gpio1_dbclk: gpio1_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1838>; + }; + + dcan1_sys_clk_mux: dcan1_sys_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&sys_clkin2>; + ti,bit-shift = <24>; + reg = <0x1888>; + }; + + timer1_gfclk_mux: timer1_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1840>; + }; + + uart10_gfclk_mux: uart10_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1880>; + }; +}; +&cm_core_clocks { + dpll_pcie_ref_ck: dpll_pcie_ref_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&sys_clkin1>; + reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; + }; + + dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_pcie_ref_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0210>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { + compatible = "ti,mux-clock"; + clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; + #clock-cells = <0>; + reg = <0x021c 0x4>; + ti,bit-shift = <7>; + }; + + apll_pcie_ck: apll_pcie_ck { + #clock-cells = <0>; + compatible = "ti,dra7-apll-clock"; + clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; + reg = <0x021c>, <0x0220>; + }; + + optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 { + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + #clock-cells = <0>; + reg = <0x13b0>; + ti,bit-shift = <8>; + }; + + optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <8>; + }; + + optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { + compatible = "ti,divider-clock"; + clocks = <&apll_pcie_ck>; + #clock-cells = <0>; + reg = <0x021c>; + ti,dividers = <2>, <1>; + ti,bit-shift = <8>; + ti,max-div = <2>; + }; + + optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 { + compatible = "ti,gate-clock"; + clocks = <&apll_pcie_ck>; + #clock-cells = <0>; + reg = <0x13b0>; + ti,bit-shift = <9>; + }; + + optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&apll_pcie_ck>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <9>; + }; + + optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 { + compatible = "ti,gate-clock"; + clocks = <&optfclk_pciephy_div>; + #clock-cells = <0>; + reg = <0x13b0>; + ti,bit-shift = <10>; + }; + + optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&optfclk_pciephy_div>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <10>; + }; + + apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&apll_pcie_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&apll_pcie_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + apll_pcie_m2_ck: apll_pcie_m2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&apll_pcie_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + + dpll_per_ck: dpll_per_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; + reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; + }; + + dpll_per_m2_ck: dpll_per_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0150>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + func_96m_aon_dclk_div: func_96m_aon_dclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + + dpll_usb_ck: dpll_usb_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-j-type-clock"; + clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; + reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; + }; + + dpll_usb_m2_ck: dpll_usb_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_ck>; + ti,max-div = <127>; + ti,autoidle-shift = <8>; + reg = <0x0190>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_pcie_ref_ck>; + ti,max-div = <127>; + ti,autoidle-shift = <8>; + reg = <0x0210>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_x2_ck: dpll_per_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_per_ck>; + }; + + dpll_per_h11x2_ck: dpll_per_h11x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0158>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_h12x2_ck: dpll_per_h12x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x015c>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_h13x2_ck: dpll_per_h13x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0160>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_h14x2_ck: dpll_per_h14x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <63>; + ti,autoidle-shift = <8>; + reg = <0x0164>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_m2x2_ck: dpll_per_m2x2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0150>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_usb_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + func_128m_clk: func_128m_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_h11x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + func_12m_fclk: func_12m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + func_24m_clk: func_24m_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + func_48m_fclk: func_48m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + func_96m_fclk: func_96m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + l3init_60m_fclk: l3init_60m_fclk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_m2_ck>; + reg = <0x0104>; + ti,dividers = <1>, <8>; + }; + + clkout2_clk: clkout2_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkoutmux2_clk_mux>; + ti,bit-shift = <8>; + reg = <0x06b0>; + }; + + l3init_960m_gfclk: l3init_960m_gfclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_usb_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x06c0>; + }; + + dss_32khz_clk: dss_32khz_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <11>; + reg = <0x1120>; + }; + + dss_48mhz_clk: dss_48mhz_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_48m_fclk>; + ti,bit-shift = <9>; + reg = <0x1120>; + }; + + dss_dss_clk: dss_dss_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_h12x2_ck>; + ti,bit-shift = <8>; + reg = <0x1120>; + ti,set-rate-parent; + }; + + dss_hdmi_clk: dss_hdmi_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&hdmi_dpll_clk_mux>; + ti,bit-shift = <10>; + reg = <0x1120>; + }; + + dss_video1_clk: dss_video1_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&video1_dpll_clk_mux>; + ti,bit-shift = <12>; + reg = <0x1120>; + }; + + dss_video2_clk: dss_video2_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&video2_dpll_clk_mux>; + ti,bit-shift = <13>; + reg = <0x1120>; + }; + + gpio2_dbclk: gpio2_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1760>; + }; + + gpio3_dbclk: gpio3_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1768>; + }; + + gpio4_dbclk: gpio4_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1770>; + }; + + gpio5_dbclk: gpio5_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1778>; + }; + + gpio6_dbclk: gpio6_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1780>; + }; + + gpio7_dbclk: gpio7_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1810>; + }; + + gpio8_dbclk: gpio8_dbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1818>; + }; + + mmc1_clk32k: mmc1_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1328>; + }; + + mmc2_clk32k: mmc2_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1330>; + }; + + mmc3_clk32k: mmc3_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1820>; + }; + + mmc4_clk32k: mmc4_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1828>; + }; + + sata_ref_clk: sata_ref_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_clkin1>; + ti,bit-shift = <8>; + reg = <0x1388>; + }; + + usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l3init_960m_gfclk>; + ti,bit-shift = <8>; + reg = <0x13f0>; + }; + + usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l3init_960m_gfclk>; + ti,bit-shift = <8>; + reg = <0x1340>; + }; + + usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0640>; + }; + + usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0688>; + }; + + usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0698>; + }; + + atl_dpll_clk_mux: atl_dpll_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>; + ti,bit-shift = <24>; + reg = <0x0c00>; + }; + + atl_gfclk_mux: atl_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>; + ti,bit-shift = <26>; + reg = <0x0c00>; + }; + + gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_m2_ck>; + ti,bit-shift = <24>; + reg = <0x13d0>; + ti,dividers = <2>; + }; + + gmac_rft_clk_mux: gmac_rft_clk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>; + ti,bit-shift = <25>; + reg = <0x13d0>; + }; + + gpu_core_gclk_mux: gpu_core_gclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; + ti,bit-shift = <24>; + reg = <0x1220>; + }; + + gpu_hyd_gclk_mux: gpu_hyd_gclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; + ti,bit-shift = <26>; + reg = <0x1220>; + }; + + l3instr_ts_gclk_div: l3instr_ts_gclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&wkupaon_iclk_mux>; + ti,bit-shift = <24>; + reg = <0x0e50>; + ti,dividers = <8>, <16>, <32>; + }; + + mcasp2_ahclkr_mux: mcasp2_ahclkr_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <28>; + reg = <0x1860>; + }; + + mcasp2_ahclkx_mux: mcasp2_ahclkx_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <24>; + reg = <0x1860>; + }; + + mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <22>; + reg = <0x1860>; + }; + + mcasp3_ahclkx_mux: mcasp3_ahclkx_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <24>; + reg = <0x1868>; + }; + + mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <22>; + reg = <0x1868>; + }; + + mcasp4_ahclkx_mux: mcasp4_ahclkx_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <24>; + reg = <0x1898>; + }; + + mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <22>; + reg = <0x1898>; + }; + + mcasp5_ahclkx_mux: mcasp5_ahclkx_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <24>; + reg = <0x1878>; + }; + + mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <22>; + reg = <0x1878>; + }; + + mcasp6_ahclkx_mux: mcasp6_ahclkx_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <24>; + reg = <0x1904>; + }; + + mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <22>; + reg = <0x1904>; + }; + + mcasp7_ahclkx_mux: mcasp7_ahclkx_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <24>; + reg = <0x1908>; + }; + + mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <22>; + reg = <0x1908>; + }; + + mcasp8_ahclk_mux: mcasp8_ahclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + ti,bit-shift = <22>; + reg = <0x1890>; + }; + + mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; + ti,bit-shift = <24>; + reg = <0x1890>; + }; + + mmc1_fclk_mux: mmc1_fclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1328>; + }; + + mmc1_fclk_div: mmc1_fclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&mmc1_fclk_mux>; + ti,bit-shift = <25>; + ti,max-div = <4>; + reg = <0x1328>; + ti,index-power-of-two; + }; + + mmc2_fclk_mux: mmc2_fclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1330>; + }; + + mmc2_fclk_div: mmc2_fclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&mmc2_fclk_mux>; + ti,bit-shift = <25>; + ti,max-div = <4>; + reg = <0x1330>; + ti,index-power-of-two; + }; + + mmc3_gfclk_mux: mmc3_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1820>; + }; + + mmc3_gfclk_div: mmc3_gfclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&mmc3_gfclk_mux>; + ti,bit-shift = <25>; + ti,max-div = <4>; + reg = <0x1820>; + ti,index-power-of-two; + }; + + mmc4_gfclk_mux: mmc4_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1828>; + }; + + mmc4_gfclk_div: mmc4_gfclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&mmc4_gfclk_mux>; + ti,bit-shift = <25>; + ti,max-div = <4>; + reg = <0x1828>; + ti,index-power-of-two; + }; + + qspi_gfclk_mux: qspi_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>; + ti,bit-shift = <24>; + reg = <0x1838>; + }; + + qspi_gfclk_div: qspi_gfclk_div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&qspi_gfclk_mux>; + ti,bit-shift = <25>; + ti,max-div = <4>; + reg = <0x1838>; + ti,index-power-of-two; + }; + + timer10_gfclk_mux: timer10_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1728>; + }; + + timer11_gfclk_mux: timer11_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1730>; + }; + + timer13_gfclk_mux: timer13_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x17c8>; + }; + + timer14_gfclk_mux: timer14_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x17d0>; + }; + + timer15_gfclk_mux: timer15_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x17d8>; + }; + + timer16_gfclk_mux: timer16_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1830>; + }; + + timer2_gfclk_mux: timer2_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1738>; + }; + + timer3_gfclk_mux: timer3_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1740>; + }; + + timer4_gfclk_mux: timer4_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1748>; + }; + + timer9_gfclk_mux: timer9_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; + ti,bit-shift = <24>; + reg = <0x1750>; + }; + + uart1_gfclk_mux: uart1_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1840>; + }; + + uart2_gfclk_mux: uart2_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1848>; + }; + + uart3_gfclk_mux: uart3_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1850>; + }; + + uart4_gfclk_mux: uart4_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1858>; + }; + + uart5_gfclk_mux: uart5_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x1870>; + }; + + uart7_gfclk_mux: uart7_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x18d0>; + }; + + uart8_gfclk_mux: uart8_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x18e0>; + }; + + uart9_gfclk_mux: uart9_gfclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + reg = <0x18e8>; + }; + + vip1_gclk_mux: vip1_gclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; + ti,bit-shift = <24>; + reg = <0x1020>; + }; + + vip2_gclk_mux: vip2_gclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; + ti,bit-shift = <24>; + reg = <0x1028>; + }; + + vip3_gclk_mux: vip3_gclk_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; + ti,bit-shift = <24>; + reg = <0x1030>; + }; +}; + +&cm_core_clockdomains { + coreaon_clkdm: coreaon_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_usb_ck>; + }; +}; + +&scm_conf_clocks { + dss_deshdcp_clk: dss_deshdcp_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l3_iclk_div>; + ti,bit-shift = <0>; + reg = <0x558>; + }; +}; diff --git a/arch/arm/dts/omap4-cpu-thermal.dtsi b/arch/arm/dts/omap4-cpu-thermal.dtsi new file mode 100644 index 0000000..ab7f87a --- /dev/null +++ b/arch/arm/dts/omap4-cpu-thermal.dtsi @@ -0,0 +1,41 @@ +/* + * Device Tree Source for OMAP4/5 SoC CPU thermal + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Contact: Eduardo Valentin eduardo.valentin@ti.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +cpu_thermal: cpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 0>; + + cpu_trips: trips { + cpu_alert0: cpu_alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/arch/arm/dts/omap5-core-thermal.dtsi b/arch/arm/dts/omap5-core-thermal.dtsi new file mode 100644 index 0000000..de8a3d4 --- /dev/null +++ b/arch/arm/dts/omap5-core-thermal.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Source for OMAP543x SoC CORE thermal + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Contact: Eduardo Valentin eduardo.valentin@ti.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +core_thermal: core_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 2>; + + trips { + core_crit: core_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/dts/omap5-gpu-thermal.dtsi b/arch/arm/dts/omap5-gpu-thermal.dtsi new file mode 100644 index 0000000..bc3090f --- /dev/null +++ b/arch/arm/dts/omap5-gpu-thermal.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Source for OMAP543x SoC GPU thermal + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Contact: Eduardo Valentin eduardo.valentin@ti.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +gpu_thermal: gpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 1>; + + trips { + gpu_crit: gpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/configs/dra72_evm_defconfig b/configs/dra72_evm_defconfig new file mode 100644 index 0000000..3205e72 --- /dev/null +++ b/configs/dra72_evm_defconfig @@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_OMAP54XX=y +CONFIG_TARGET_DRA7XX_EVM=y +CONFIG_DEFAULT_DEVICE_TREE="dra72-evm" +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_DM_GPIO=y diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c index 265fe00..325fe42 100644 --- a/drivers/serial/serial_omap.c +++ b/drivers/serial/serial_omap.c @@ -15,6 +15,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_OF_CONTROL static const struct udevice_id omap_serial_ids[] = { { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart" }, { } };
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h new file mode 100644 index 0000000..7448edf --- /dev/null +++ b/include/dt-bindings/pinctrl/dra.h @@ -0,0 +1,51 @@ +/* + * This header provides constants for DRA pinctrl bindings. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Rajendra Nayak rnayak@ti.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DT_BINDINGS_PINCTRL_DRA_H +#define _DT_BINDINGS_PINCTRL_DRA_H + +/* DRA7 mux mode options for each pin. See TRM for options */ +#define MUX_MODE0 0x0 +#define MUX_MODE1 0x1 +#define MUX_MODE2 0x2 +#define MUX_MODE3 0x3 +#define MUX_MODE4 0x4 +#define MUX_MODE5 0x5 +#define MUX_MODE6 0x6 +#define MUX_MODE7 0x7 +#define MUX_MODE8 0x8 +#define MUX_MODE9 0x9 +#define MUX_MODE10 0xa +#define MUX_MODE11 0xb +#define MUX_MODE12 0xc +#define MUX_MODE13 0xd +#define MUX_MODE14 0xe +#define MUX_MODE15 0xf + +#define PULL_ENA (0 << 16) +#define PULL_DIS (1 << 16) +#define PULL_UP (1 << 17) +#define INPUT_EN (1 << 18) +#define SLEWCONTROL (1 << 19) +#define WAKEUP_EN (1 << 24) +#define WAKEUP_EVENT (1 << 25) + +/* Active pin states */ +#define PIN_OUTPUT (0 | PULL_DIS) +#define PIN_OUTPUT_PULLUP (PULL_UP) +#define PIN_OUTPUT_PULLDOWN (0) +#define PIN_INPUT (INPUT_EN | PULL_DIS) +#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL) +#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) + +#endif +
Hi Tom,
On 31 July 2015 at 17:55, Tom Rini trini@konsulko.com wrote:
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel v4.1
- Add config file for this board, enable DM and DM_GPIO
Cc: Simon Glass sjg@chromium.org Signed-off-by: Tom Rini trini@konsulko.com
For some reason I can't yet figure out, enabling CONFIG_DM_SERIAL seems to be triggering the no console panic failure path, but I can't seem to figure out why.
There is a bug in it but I suspect your problem is elsewhere:
http://patchwork.ozlabs.org/patch/498648/
You could enable the debug UART and print characters to see where it fails...
DM bits: Reviewed-by: Simon Glass sjg@chromium.org
arch/arm/dts/Makefile | 1 + arch/arm/dts/dra7.dtsi | 1529 ++++++++++++++++++++++++ arch/arm/dts/dra72-evm.dts | 683 +++++++++++ arch/arm/dts/dra72x.dtsi | 47 + arch/arm/dts/dra7xx-clocks.dtsi | 2149 ++++++++++++++++++++++++++++++++++ arch/arm/dts/omap4-cpu-thermal.dtsi | 41 + arch/arm/dts/omap5-core-thermal.dtsi | 28 + arch/arm/dts/omap5-gpu-thermal.dtsi | 28 + configs/dra72_evm_defconfig | 17 + drivers/serial/serial_omap.c | 1 + include/dt-bindings/pinctrl/dra.h | 51 + 11 files changed, 4575 insertions(+) create mode 100644 arch/arm/dts/dra7.dtsi create mode 100644 arch/arm/dts/dra72-evm.dts create mode 100644 arch/arm/dts/dra72x.dtsi create mode 100644 arch/arm/dts/dra7xx-clocks.dtsi create mode 100644 arch/arm/dts/omap4-cpu-thermal.dtsi create mode 100644 arch/arm/dts/omap5-core-thermal.dtsi create mode 100644 arch/arm/dts/omap5-gpu-thermal.dtsi create mode 100644 configs/dra72_evm_defconfig create mode 100644 include/dt-bindings/pinctrl/dra.h
Regards, Simon
On Sun, Aug 02, 2015 at 03:29:12PM -0600, Simon Glass wrote:
Hi Tom,
On 31 July 2015 at 17:55, Tom Rini trini@konsulko.com wrote:
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel v4.1
- Add config file for this board, enable DM and DM_GPIO
Cc: Simon Glass sjg@chromium.org Signed-off-by: Tom Rini trini@konsulko.com
For some reason I can't yet figure out, enabling CONFIG_DM_SERIAL seems to be triggering the no console panic failure path, but I can't seem to figure out why.
There is a bug in it but I suspect your problem is elsewhere:
I had that applied locally based on your hint, no help :(
You could enable the debug UART and print characters to see where it fails...
I need to, yes, but one of my tests was commenting out the panic_str(...) and that went from a loop (since I didn't have CONFIG_PANIC_HANG set) to a hard crash I'm guessing a bit later on.
Hi Tom,
On 2 August 2015 at 17:07, Tom Rini trini@konsulko.com wrote:
On Sun, Aug 02, 2015 at 03:29:12PM -0600, Simon Glass wrote:
Hi Tom,
On 31 July 2015 at 17:55, Tom Rini trini@konsulko.com wrote:
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel v4.1
- Add config file for this board, enable DM and DM_GPIO
Cc: Simon Glass sjg@chromium.org Signed-off-by: Tom Rini trini@konsulko.com
For some reason I can't yet figure out, enabling CONFIG_DM_SERIAL seems to be triggering the no console panic failure path, but I can't seem to figure out why.
There is a bug in it but I suspect your problem is elsewhere:
I had that applied locally based on your hint, no help :(
You could enable the debug UART and print characters to see where it fails...
I need to, yes, but one of my tests was commenting out the panic_str(...) and that went from a loop (since I didn't have CONFIG_PANIC_HANG set) to a hard crash I'm guessing a bit later on.
If I could repeat this on BBB I could try to track it down. But I suspect it is something else.
Is this in U-Boot proper? It really should pick up the stdout-path right at the top of serial_find_console_or_panic() and return.
Regards, Simon
On Sun, Aug 02, 2015 at 05:22:30PM -0600, Simon Glass wrote:
Hi Tom,
On 2 August 2015 at 17:07, Tom Rini trini@konsulko.com wrote:
On Sun, Aug 02, 2015 at 03:29:12PM -0600, Simon Glass wrote:
Hi Tom,
On 31 July 2015 at 17:55, Tom Rini trini@konsulko.com wrote:
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel v4.1
- Add config file for this board, enable DM and DM_GPIO
Cc: Simon Glass sjg@chromium.org Signed-off-by: Tom Rini trini@konsulko.com
For some reason I can't yet figure out, enabling CONFIG_DM_SERIAL seems to be triggering the no console panic failure path, but I can't seem to figure out why.
There is a bug in it but I suspect your problem is elsewhere:
I had that applied locally based on your hint, no help :(
You could enable the debug UART and print characters to see where it fails...
I need to, yes, but one of my tests was commenting out the panic_str(...) and that went from a loop (since I didn't have CONFIG_PANIC_HANG set) to a hard crash I'm guessing a bit later on.
If I could repeat this on BBB I could try to track it down. But I suspect it is something else.
Indeed, I was hoping it was a few things but I couldn't make am335x-gp-evm fail.
Is this in U-Boot proper? It really should pick up the stdout-path right at the top of serial_find_console_or_panic() and return.
Full U-Boot. SPL_DM is off. And yes, since we set stdout-path and have everything else set right in the DT it's very puzzling :(
Hi Tom.
On 2 August 2015 at 17:29, Tom Rini trini@konsulko.com wrote:
On Sun, Aug 02, 2015 at 05:22:30PM -0600, Simon Glass wrote:
Hi Tom,
On 2 August 2015 at 17:07, Tom Rini trini@konsulko.com wrote:
On Sun, Aug 02, 2015 at 03:29:12PM -0600, Simon Glass wrote:
Hi Tom,
On 31 July 2015 at 17:55, Tom Rini trini@konsulko.com wrote:
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel v4.1
- Add config file for this board, enable DM and DM_GPIO
Cc: Simon Glass sjg@chromium.org Signed-off-by: Tom Rini trini@konsulko.com
For some reason I can't yet figure out, enabling CONFIG_DM_SERIAL seems to be triggering the no console panic failure path, but I can't seem to figure out why.
There is a bug in it but I suspect your problem is elsewhere:
I had that applied locally based on your hint, no help :(
You could enable the debug UART and print characters to see where it fails...
I need to, yes, but one of my tests was commenting out the panic_str(...) and that went from a loop (since I didn't have CONFIG_PANIC_HANG set) to a hard crash I'm guessing a bit later on.
If I could repeat this on BBB I could try to track it down. But I suspect it is something else.
Indeed, I was hoping it was a few things but I couldn't make am335x-gp-evm fail.
Is this in U-Boot proper? It really should pick up the stdout-path right at the top of serial_find_console_or_panic() and return.
Full U-Boot. SPL_DM is off. And yes, since we set stdout-path and have everything else set right in the DT it's very puzzling :(
Well if you can get a debug UART:
- check the return value of uclass_get_device_by_of_offset(). It should be 0 assuming that you have u-boot,dm-pre-reloc set for your console UART node - if not, then lists_bind_fdt() should return 0, and then device_probe() should return 0. For the former, something is horribly wrong. For the latter check if your driver's probe function is returning something odd...
Regards, Simon
On Fri, Jul 31, 2015 at 07:55:12PM -0400, Tom Rini wrote:
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel v4.1
- Add config file for this board, enable DM and DM_GPIO
Cc: Simon Glass sjg@chromium.org Signed-off-by: Tom Rini trini@konsulko.com Reviewed-by: Simon Glass sjg@chromium.org
Applied to u-boot/master, thanks!
On Fri, Jul 31, 2015 at 07:55:08PM -0400, Tom Rini wrote:
- Re-sync DT files for am33xx with Linux Kernel v4.1
- Include DT file now for the "AM335x GP EVM" and build target for it, via device tree and DM.
- We only need to provide platform data for UART when OF_CONTROL isn't also enabled really. We can just push GPIO to coming from DT
Signed-off-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
participants (2)
-
Simon Glass -
Tom Rini