Re: [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST
On Wed, Aug 12, 2009 at 11:48:27AM -0500, Paulraj, Sandeep wrote:
There are other issues. The NAND manufacturers have changed the format of the 4Th ID byte and some other are supporting ONFI. Current NAND driver has no support for these
There are always other issues. :-)
Unless the issues show up on hardware I'm working with, there's not much I can do other than apply patches from others.
Shrinking the footprint will first need to be done in the MTD GIT and then the changes should trickle down to other trees including U-Boot.
That would be preferable, but we are not obligated to follow Linux's lead if they aren't interested.
So I take it that you will add these 2 patches to the u-boot-nand-flash/next git soon.
Assuming no other issues, yes.
-Scott
There are always other issues. :-)
Unless the issues show up on hardware I'm working with, there's not much I can do other than apply patches from others.
Shrinking the footprint will first need to be done in the MTD GIT and then the changes should trickle down to other trees including U-Boot.
That would be preferable, but we are not obligated to follow Linux's lead if they aren't interested.
So I take it that you will add these 2 patches to the u-boot-nand-
flash/next git soon.
Assuming no other issues, yes.
Ok Thanks
-Scott
When you get time can you also review the following NAND specific patches [PATCH] NAND: DaVinci: Adding 4 BIT ECC support [PATCH] ARM: DaVinci DM355: Updating the DM355 EVM config
Thanks, Sandeep
participants (2)
-
Paulraj, Sandeep -
Scott Wood