[U-Boot-Users] [PATCH] sh: Add support for MPR2 board
Hello,
the attached patch adds support for the Renesas SH7720 based board MPR2.
Regards, Mark Jonas
CHANGELOG: ---------- sh: Added support for SH7720 based board MPR2.
Signed-off-by: Mark Jonas mark.jonas@de.bosch.com
Hello, Mark.
On Fri, 7 Mar 2008 10:23:35 +0100 "Mark Jonas" toertel@gmail.com wrote:
Hello,
the attached patch adds support for the Renesas SH7720 based board MPR2.
Please transmit the patch by the text without settling with tar. Could you send it again? Please do not send it to this ML with the HTML mail.
regards, Nobuhiro
Hello Nobuhiro,
the attached patch adds support for the Renesas SH7720 based board MPR2.
Please transmit the patch by the text without settling with tar. Could you send it again?
Attached you'll find the uncompressed patch this time. In my previous post the patch was not tared but compressed using bzip2. I choose to compress the patches because the Ethernet patch would have been more than 40 KiB uncompressed. Isn't compressing patches an option on this mailing list to minimize traffic?
Please do not send it to this ML with the HTML mail.
I am terribly sorry to have sent HTML - although my default setting in GMail is plain text and not rich formatting. I also looked up my posting on http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg02469.html and I am not able to see any HTML. I hope that there is no HTML this time.
Regards, Mark
Hello, Mark.
On Fri, 7 Mar 2008 23:05:16 +0100 "Mark Jonas" toertel@gmail.com wrote:
Hello Nobuhiro,
the attached patch adds support for the Renesas SH7720 based board MPR2.
Please transmit the patch by the text without settling with tar. Could you send it again?
Attached you'll find the uncompressed patch this time. In my previous post the patch was not tared but compressed using bzip2. I choose to compress the patches because the Ethernet patch would have been more than 40 KiB uncompressed. Isn't compressing patches an option on this mailing list to minimize traffic?
Please check http://www.denx.de/wiki/UBoot/Patches . The rule of this ML is written here.
Please do not send it to this ML with the HTML mail.
I am terribly sorry to have sent HTML - although my default setting in GMail is plain text and not rich formatting. I also looked up my posting on http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg02469.html and I am not able to see any HTML. I hope that there is no HTML this time.
Oh, Sorry! It is my mistake.
[u-boot_mpr2_20080307.patch application/octet-stream (23.7KB)] diff -purN u-boot_v1.3.2-rc3_20080303/board/mpr2/config.mk u-boot_v1.3.2-rc3_20080303_mpr2_no_net/board/mpr2/config.mk --- u-boot_v1.3.2-rc3_20080303/board/mpr2/config.mk 1970-01-01 01:00:00.000000000 +0100 +++ u-boot_v1.3.2-rc3_20080303_mpr2_no_net/board/mpr2/config.mk 2008-03-07 08:13:13.000000000 +0100 <snip> Please add your name and board name to MAINTAINERS file.
regards, Nobuhiro
Hello Nobuhiro,
Attached you'll find the uncompressed patch this time. In my previous post the patch was not tared but compressed using bzip2. I choose to compress the patches because the Ethernet patch would have been more than 40 KiB uncompressed. Isn't compressing patches an option on this mailing list to minimize traffic?
Please check http://www.denx.de/wiki/UBoot/Patches . The rule of this ML is written here.
Interesting, U-Boot's Readme seems to be in conflict with U-Boot's web page. The Readme says:
"* Remember that there is a size limit of 40 kB per message on the u-boot-users mailing list. Compression may help."
So I understood compression is optional to minimize traffic on the list.
Please add your name and board name to MAINTAINERS file.
I will do so.
Regards, Mark
participants (2)
-
Mark Jonas -
Nobuhiro Iwamatsu