[U-Boot] [PATCH V3 00/12] Blackfin: add new processor and board
Blackfin bf60x is a new processor for blackfin. This series patches add some basic support for it with a bf609-ezkit reference board.
I got some suggestion in the former commit. Some of them are fixed, but some is still not clear. Since it's a long time ago, i send out V3 for feedback.
Bob Liu (7): Blackfin: bf60x: new processor header files Blackfin: bf60x: add dma support Blackfin: bf60x: support big cplb page Blackfin: bf60x: add gpio support Blackfin: bf60x: core support blackfin: bf609: add board support Blackfin: bf60x: add hw watchdog support
Scott Jiang (1): Blackfin: spi: add bf6xx spi driver
Sonic Zhang (3): Blackfin: bf60x: add serial support Blackfin: bf60x: add rsi/sdh support Blackfin: bf609-ezkit: implement soft switch
Steven Miao (1): Blackfin: Bf60x: add resume from hibernate
MAINTAINERS | 1 + arch/blackfin/cpu/cpu.c | 4 +- arch/blackfin/cpu/gpio.c | 36 +- arch/blackfin/cpu/initcode.c | 365 +- arch/blackfin/cpu/initcode.h | 52 + arch/blackfin/cpu/reset.c | 6 + arch/blackfin/cpu/serial.c | 81 +- arch/blackfin/cpu/serial.h | 222 +- arch/blackfin/cpu/serial1.h | 275 ++ arch/blackfin/cpu/serial4.h | 139 + arch/blackfin/cpu/start.S | 2 + arch/blackfin/include/asm/blackfin_cdef.h | 3 + arch/blackfin/include/asm/blackfin_def.h | 5 + arch/blackfin/include/asm/blackfin_local.h | 3 + arch/blackfin/include/asm/config-pre.h | 4 + arch/blackfin/include/asm/cplb.h | 17 +- arch/blackfin/include/asm/dma.h | 113 +- arch/blackfin/include/asm/gpio.h | 2 +- arch/blackfin/include/asm/mach-bf609/BF609_cdef.h | 543 +++ arch/blackfin/include/asm/mach-bf609/BF609_def.h | 3758 ++++++++++++++++++++ arch/blackfin/include/asm/mach-bf609/anomaly.h | 128 + arch/blackfin/include/asm/mach-bf609/def_local.h | 5 + arch/blackfin/include/asm/mach-bf609/gpio.h | 151 + arch/blackfin/include/asm/mach-bf609/portmux.h | 257 ++ arch/blackfin/include/asm/mach-bf609/ports.h | 103 + arch/blackfin/include/asm/mach-common/bits/cgu.h | 80 + arch/blackfin/include/asm/mach-common/bits/dde.h | 88 + arch/blackfin/include/asm/mach-common/bits/dma.h | 48 +- arch/blackfin/include/asm/mach-common/bits/mpu.h | 6 +- arch/blackfin/include/asm/mach-common/bits/pll.h | 5 + arch/blackfin/include/asm/mach-common/bits/sdh.h | 38 +- .../blackfin/include/asm/mach-common/bits/spi6xx.h | 240 ++ arch/blackfin/include/asm/mach-common/bits/uart4.h | 66 + arch/blackfin/lib/board.c | 33 +- arch/blackfin/lib/clocks.c | 113 +- arch/blackfin/lib/string.c | 97 +- board/bf609-ezkit/Makefile | 55 + board/bf609-ezkit/bf609-ezkit.c | 67 + board/bf609-ezkit/soft_switch.c | 169 + board/bf609-ezkit/soft_switch.h | 71 + boards.cfg | 1 + common/cmd_reginfo.c | 19 +- drivers/mmc/bfin_sdh.c | 68 +- drivers/spi/Makefile | 1 + drivers/spi/bfin_spi6xx.c | 308 ++ include/configs/bf609-ezkit.h | 175 + include/configs/bfin_adi_common.h | 8 +- 47 files changed, 7611 insertions(+), 420 deletions(-) create mode 100644 arch/blackfin/cpu/serial1.h create mode 100644 arch/blackfin/cpu/serial4.h create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_cdef.h create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_def.h create mode 100644 arch/blackfin/include/asm/mach-bf609/anomaly.h create mode 100644 arch/blackfin/include/asm/mach-bf609/def_local.h create mode 100644 arch/blackfin/include/asm/mach-bf609/gpio.h create mode 100644 arch/blackfin/include/asm/mach-bf609/portmux.h create mode 100644 arch/blackfin/include/asm/mach-bf609/ports.h create mode 100644 arch/blackfin/include/asm/mach-common/bits/cgu.h create mode 100644 arch/blackfin/include/asm/mach-common/bits/dde.h create mode 100644 arch/blackfin/include/asm/mach-common/bits/spi6xx.h create mode 100644 arch/blackfin/include/asm/mach-common/bits/uart4.h create mode 100644 board/bf609-ezkit/Makefile create mode 100644 board/bf609-ezkit/bf609-ezkit.c create mode 100644 board/bf609-ezkit/soft_switch.c create mode 100644 board/bf609-ezkit/soft_switch.h create mode 100644 drivers/spi/bfin_spi6xx.c create mode 100644 include/configs/bf609-ezkit.h
Add header files for blackfin new processor bf60x.
Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/include/asm/blackfin_cdef.h | 3 + arch/blackfin/include/asm/blackfin_def.h | 5 + arch/blackfin/include/asm/blackfin_local.h | 3 + arch/blackfin/include/asm/mach-bf609/BF609_cdef.h | 543 +++ arch/blackfin/include/asm/mach-bf609/BF609_def.h | 3758 +++++++++++++++++++++ arch/blackfin/include/asm/mach-bf609/anomaly.h | 128 + arch/blackfin/include/asm/mach-bf609/def_local.h | 5 + arch/blackfin/include/asm/mach-bf609/portmux.h | 257 ++ arch/blackfin/include/asm/mach-bf609/ports.h | 103 + arch/blackfin/include/asm/mach-common/bits/cgu.h | 80 + arch/blackfin/include/asm/mach-common/bits/dde.h | 88 + arch/blackfin/include/asm/mach-common/bits/mpu.h | 6 +- arch/blackfin/include/asm/mach-common/bits/pll.h | 5 + 13 files changed, 4983 insertions(+), 1 deletion(-) create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_cdef.h create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_def.h create mode 100644 arch/blackfin/include/asm/mach-bf609/anomaly.h create mode 100644 arch/blackfin/include/asm/mach-bf609/def_local.h create mode 100644 arch/blackfin/include/asm/mach-bf609/portmux.h create mode 100644 arch/blackfin/include/asm/mach-bf609/ports.h create mode 100644 arch/blackfin/include/asm/mach-common/bits/cgu.h create mode 100644 arch/blackfin/include/asm/mach-common/bits/dde.h
diff --git a/arch/blackfin/include/asm/blackfin_cdef.h b/arch/blackfin/include/asm/blackfin_cdef.h index a19f0f7..8608711 100644 --- a/arch/blackfin/include/asm/blackfin_cdef.h +++ b/arch/blackfin/include/asm/blackfin_cdef.h @@ -84,5 +84,8 @@ #ifdef __ADSPBF561__ # include "mach-bf561/BF561_cdef.h" #endif +#ifdef __ADSPBF609__ +# include "mach-bf609/BF609_cdef.h" +#endif
#endif /* __MACH_CDEF_BLACKFIN__ */ diff --git a/arch/blackfin/include/asm/blackfin_def.h b/arch/blackfin/include/asm/blackfin_def.h index f06d1f1..c96a3ec 100644 --- a/arch/blackfin/include/asm/blackfin_def.h +++ b/arch/blackfin/include/asm/blackfin_def.h @@ -136,5 +136,10 @@ # include "mach-bf561/anomaly.h" # include "mach-bf561/def_local.h" #endif +#ifdef __ADSPBF609__ +# include "mach-bf609/BF609_def.h" +# include "mach-bf609/anomaly.h" +# include "mach-bf609/def_local.h" +#endif
#endif /* __MACH_DEF_BLACKFIN__ */ diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h index 49d0c9e..fc46ef4 100644 --- a/arch/blackfin/include/asm/blackfin_local.h +++ b/arch/blackfin/include/asm/blackfin_local.h @@ -61,6 +61,9 @@ extern u_long get_vco(void); extern u_long get_cclk(void); extern u_long get_sclk(void); +extern u_long get_sclk0(void); +extern u_long get_sclk1(void); +extern u_long get_dclk(void);
# define bfin_revid() (bfin_read_CHIPID() >> 28)
diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_cdef.h b/arch/blackfin/include/asm/mach-bf609/BF609_cdef.h new file mode 100644 index 0000000..a8c0773 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/BF609_cdef.h @@ -0,0 +1,543 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-cdef-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_CDEF_ADSP_BF504_proc__ +#define __BFIN_CDEF_ADSP_BF504_proc__ + +#include "../mach-common/ADSP-EDN-core_cdef.h" + +#define bfin_read_CGU_STAT() bfin_read32(CGU_STAT) +#define bfin_read_CGU_CLKOUTSEL() bfin_read32(CGU_CLKOUTSEL) +#define bfin_read_CGU_CTL() bfin_read32(CGU_CTL) +#define bfin_write_CGU_CTL(val) bfin_write32(CGU_CTL, val) +#define bfin_read_CGU_DIV() bfin_read32(CGU_DIV) +#define bfin_write_CGU_DIV(val) bfin_write32(CGU_DIV, val) + +#define bfin_read_RCU0_CTL() bfin_read32(RCU0_CTL) +#define bfin_write_RCU0_CTL(val) bfin_write32(RCU0_CTL, val) + +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + +#define bfin_read_DMC0_CFG() bfin_read32(DMC0_CFG) +#define bfin_write_DMC0_CFG(val) bfin_write32(DMC0_CFG, val) +#define bfin_read_DMC0_TR0() bfin_read32(DMC0_TR0) +#define bfin_write_DMC0_TR0(val) bfin_write32(DMC0_TR0, val) +#define bfin_read_DMC0_TR1() bfin_read32(DMC0_TR1) +#define bfin_write_DMC0_TR1(val) bfin_write32(DMC0_TR1, val) +#define bfin_read_DMC0_TR2() bfin_read32(DMC0_TR2) +#define bfin_write_DMC0_TR2(val) bfin_write32(DMC0_TR2, val) +#define bfin_read_DMC0_MR() bfin_read32(DMC0_MR) +#define bfin_write_DMC0_MR(val) bfin_write32(DMC0_MR, val) +#define bfin_read_DMC0_EMR1() bfin_read32(DMC0_EMR1) +#define bfin_write_DMC0_EMR1(val) bfin_write32(DMC0_EMR1, val) +#define bfin_read_DMC0_CTL() bfin_read32(DMC0_CTL) +#define bfin_write_DMC0_CTL(val) bfin_write32(DMC0_CTL, val) +#define bfin_read_DMC0_STAT() bfin_read32(DMC0_STAT) +#define bfin_write_DMC0_STAT(val) bfin_write32(DMC0_STAT, val) +#define bfin_read_DMC0_DLLCTL() bfin_read32(DMC0_DLLCTL) +#define bfin_write_DMC0_DLLCTL(val) bfin_write32(DMC0_DLLCTL, val) + +#define bfin_read_SEC_CCTL() bfin_read32(SEC0_CCTL0) +#define bfin_write_SEC_CCTL(val) bfin_write32(SEC0_CCTL0, val) +#define bfin_read_SEC_GCTL() bfin_read32(SEC0_GCTL) +#define bfin_write_SEC_GCTL(val) bfin_write32(SEC0_GCTL, val) + +#define bfin_read_SEC_FCTL() bfin_read32(SEC0_FCTL) +#define bfin_write_SEC_FCTL(val) bfin_write32(SEC0_FCTL, val) +#define bfin_read_SEC_SCTL(sid) bfin_read32((SEC0_SCTL0 + (sid) * 8)) +#define bfin_write_SEC_SCTL(sid, val) bfin_write32((SEC0_SCTL0 + (sid) * 8), val) + +#define bfin_read_SMC_GCTL() bfin_read32(SMC_GCTL) +#define bfin_write_SMC_GCTL(val) bfin_write32(SMC_GCTL, val) +#define bfin_read_SMC_GSTAT() bfin_read32(SMC_GSTAT) +#define bfin_read_SMC_B0CTL() bfin_read32(SMC_B0CTL) +#define bfin_write_SMC_B0CTL(val) bfin_write32(SMC_B0CTL, val) +#define bfin_read_SMC_B0TIM() bfin_read32(SMC_B0TIM) +#define bfin_write_SMC_B0TIM(val) bfin_write32(SMC_B0TIM, val) +#define bfin_read_SMC_B0ETIM() bfin_read32(SMC_B0ETIM) +#define bfin_write_SMC_B0ETIM(val) bfin_write32(SMC_B0ETIM, val) +#define bfin_read_SMC_B1CTL() bfin_read32(SMC_B1CTL) +#define bfin_write_SMC_B1CTL(val) bfin_write32(SMC_B1CTL, val) +#define bfin_read_SMC_B1TIM() bfin_read32(SMC_B1TIM) +#define bfin_write_SMC_B1TIM(val) bfin_write32(SMC_B1TIM, val) +#define bfin_read_SMC_B1ETIM() bfin_read32(SMC_B1ETIM) +#define bfin_write_SMC_B1ETIM(val) bfin_write32(SMC_B1ETIM, val) +#define bfin_read_SMC_B2CTL() bfin_read32(SMC_B2CTL) +#define bfin_write_SMC_B2CTL(val) bfin_write32(SMC_B2CTL, val) +#define bfin_read_SMC_B2TIM() bfin_read32(SMC_B2TIM) +#define bfin_write_SMC_B2TIM(val) bfin_write32(SMC_B2TIM, val) +#define bfin_read_SMC_B2ETIM() bfin_read32(SMC_B2ETIM) +#define bfin_write_SMC_B2ETIM(val) bfin_write32(SMC_B2ETIM, val) +#define bfin_read_SMC_B3CTL() bfin_read32(SMC_B3CTL) +#define bfin_write_SMC_B3CTL(val) bfin_write32(SMC_B3CTL, val) +#define bfin_read_SMC_B3TIM() bfin_read32(SMC_B3TIM) +#define bfin_write_SMC_B3TIM(val) bfin_write32(SMC_B3TIM, val) +#define bfin_read_SMC_B3ETIM() bfin_read32(SMC_B3ETIM) +#define bfin_write_SMC_B3ETIM(val) bfin_write32(SMC_B3ETIM, val) + +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_DSCPTR_NXT) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_DSCPTR_NXT, val) +#define bfin_read_DMA0_START_ADDR() bfin_readPTR(DMA0_ADDRSTART) +#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_ADDRSTART, val) +#define bfin_read_DMA0_CONFIG() bfin_read32(DMA0_CFG) +#define bfin_write_DMA0_CONFIG(val) bfin_write32(DMA0_CFG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read32(DMA0_XCNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write32(DMA0_XCNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read32(DMA0_XMOD) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write32(DMA0_XMOD, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read32(DMA0_YCNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write32(DMA0_YCNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read32(DMA0_YMOD) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write32(DMA0_YMOD, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_DSCPTR_CUR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_DSCPTR_CUR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_readPTR(DMA0_ADDR_CUR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_ADDR_CUR, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read32(DMA0_STAT) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write32(DMA0_STAT, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read32(DMA0_XCNT_CUR) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write32(DMA0_XCNT_CUR, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read32(DMA0_YCNT_CUR) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write32(DMA0_YCNT_CUR, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_DSCPTR_NXT) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_DSCPTR_NXT, val) +#define bfin_read_DMA1_START_ADDR() bfin_readPTR(DMA1_ADDRSTART) +#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_ADDRSTART, val) +#define bfin_read_DMA1_CONFIG() bfin_read32(DMA1_CFG) +#define bfin_write_DMA1_CONFIG(val) bfin_write32(DMA1_CFG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read32(DMA1_XCNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write32(DMA1_XCNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read32(DMA1_XMOD) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write32(DMA1_XMOD, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read32(DMA1_YCNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write32(DMA1_YCNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read32(DMA1_YMOD) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write32(DMA1_YMOD, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_DSCPTR_CUR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_DSCPTR_CUR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_readPTR(DMA1_ADDR_CUR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_ADDR_CUR, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read32(DMA1_STAT) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write32(DMA1_STAT, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read32(DMA1_XCNT_CUR) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write32(DMA1_XCNT_CUR, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read32(DMA1_YCNT_CUR) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write32(DMA1_YCNT_CUR, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_DSCPTR_NXT) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_DSCPTR_NXT, val) +#define bfin_read_DMA2_START_ADDR() bfin_readPTR(DMA2_ADDRSTART) +#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_ADDRSTART, val) +#define bfin_read_DMA2_CONFIG() bfin_read32(DMA2_CFG) +#define bfin_write_DMA2_CONFIG(val) bfin_write32(DMA2_CFG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read32(DMA2_XCNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write32(DMA2_XCNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read32(DMA2_XMOD) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write32(DMA2_XMOD, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read32(DMA2_YCNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write32(DMA2_YCNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read32(DMA2_YMOD) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write32(DMA2_YMOD, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_DSCPTR_CUR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_DSCPTR_CUR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_readPTR(DMA2_ADDR_CUR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_ADDR_CUR, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read32(DMA2_STAT) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write32(DMA2_STAT, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read32(DMA2_XCNT_CUR) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write32(DMA2_XCNT_CUR, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read32(DMA2_YCNT_CUR) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write32(DMA2_YCNT_CUR, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_DSCPTR_NXT) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_DSCPTR_NXT, val) +#define bfin_read_DMA3_START_ADDR() bfin_readPTR(DMA3_ADDRSTART) +#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_ADDRSTART, val) +#define bfin_read_DMA3_CONFIG() bfin_read32(DMA3_CFG) +#define bfin_write_DMA3_CONFIG(val) bfin_write32(DMA3_CFG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read32(DMA3_XCNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write32(DMA3_XCNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read32(DMA3_XMOD) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write32(DMA3_XMOD, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read32(DMA3_YCNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write32(DMA3_YCNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read32(DMA3_YMOD) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write32(DMA3_YMOD, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_DSCPTR_CUR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_DSCPTR_CUR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_readPTR(DMA3_ADDR_CUR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_ADDR_CUR, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read32(DMA3_STAT) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write32(DMA3_STAT, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read32(DMA3_XCNT_CUR) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write32(DMA3_XCNT_CUR, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read32(DMA3_YCNT_CUR) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write32(DMA3_YCNT_CUR, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_DSCPTR_NXT) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_DSCPTR_NXT, val) +#define bfin_read_DMA4_START_ADDR() bfin_readPTR(DMA4_ADDRSTART) +#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_ADDRSTART, val) +#define bfin_read_DMA4_CONFIG() bfin_read32(DMA4_CFG) +#define bfin_write_DMA4_CONFIG(val) bfin_write32(DMA4_CFG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read32(DMA4_XCNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write32(DMA4_XCNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read32(DMA4_XMOD) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write32(DMA4_XMOD, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read32(DMA4_YCNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write32(DMA4_YCNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read32(DMA4_YMOD) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write32(DMA4_YMOD, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_DSCPTR_CUR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_DSCPTR_CUR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_readPTR(DMA4_ADDR_CUR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_ADDR_CUR, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read32(DMA4_STAT) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write32(DMA4_STAT, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read32(DMA4_XCNT_CUR) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write32(DMA4_XCNT_CUR, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read32(DMA4_YCNT_CUR) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write32(DMA4_YCNT_CUR, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_DSCPTR_NXT) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_DSCPTR_NXT, val) +#define bfin_read_DMA5_START_ADDR() bfin_readPTR(DMA5_ADDRSTART) +#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_ADDRSTART, val) +#define bfin_read_DMA5_CONFIG() bfin_read32(DMA5_CFG) +#define bfin_write_DMA5_CONFIG(val) bfin_write32(DMA5_CFG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read32(DMA5_XCNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write32(DMA5_XCNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read32(DMA5_XMOD) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write32(DMA5_XMOD, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read32(DMA5_YCNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write32(DMA5_YCNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read32(DMA5_YMOD) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write32(DMA5_YMOD, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_DSCPTR_CUR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_DSCPTR_CUR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_readPTR(DMA5_ADDR_CUR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_ADDR_CUR, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read32(DMA5_STAT) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write32(DMA5_STAT, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read32(DMA5_XCNT_CUR) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write32(DMA5_XCNT_CUR, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read32(DMA5_YCNT_CUR) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write32(DMA5_YCNT_CUR, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_DSCPTR_NXT) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_DSCPTR_NXT, val) +#define bfin_read_DMA6_START_ADDR() bfin_readPTR(DMA6_ADDRSTART) +#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_ADDRSTART, val) +#define bfin_read_DMA6_CONFIG() bfin_read32(DMA6_CFG) +#define bfin_write_DMA6_CONFIG(val) bfin_write32(DMA6_CFG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read32(DMA6_XCNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write32(DMA6_XCNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read32(DMA6_XMOD) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write32(DMA6_XMOD, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read32(DMA6_YCNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write32(DMA6_YCNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read32(DMA6_YMOD) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write32(DMA6_YMOD, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_DSCPTR_CUR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_DSCPTR_CUR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_readPTR(DMA6_ADDR_CUR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_ADDR_CUR, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read32(DMA6_STAT) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write32(DMA6_STAT, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read32(DMA6_XCNT_CUR) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write32(DMA6_XCNT_CUR, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read32(DMA6_YCNT_CUR) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write32(DMA6_YCNT_CUR, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_DSCPTR_NXT) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_DSCPTR_NXT, val) +#define bfin_read_DMA7_START_ADDR() bfin_readPTR(DMA7_ADDRSTART) +#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_ADDRSTART, val) +#define bfin_read_DMA7_CONFIG() bfin_read32(DMA7_CFG) +#define bfin_write_DMA7_CONFIG(val) bfin_write32(DMA7_CFG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read32(DMA7_XCNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write32(DMA7_XCNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read32(DMA7_XMOD) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write32(DMA7_XMOD, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read32(DMA7_YCNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write32(DMA7_YCNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read32(DMA7_YMOD) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write32(DMA7_YMOD, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_DSCPTR_CUR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_DSCPTR_CUR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_readPTR(DMA7_ADDR_CUR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_ADDR_CUR, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read32(DMA7_STAT) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write32(DMA7_STAT, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read32(DMA7_XCNT_CUR) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write32(DMA7_XCNT_CUR, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read32(DMA7_YCNT_CUR) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write32(DMA7_YCNT_CUR, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_DSCPTR_NXT) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_DSCPTR_NXT, val) +#define bfin_read_DMA8_START_ADDR() bfin_readPTR(DMA8_ADDRSTART) +#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_ADDRSTART, val) +#define bfin_read_DMA8_CONFIG() bfin_read32(DMA8_CFG) +#define bfin_write_DMA8_CONFIG(val) bfin_write32(DMA8_CFG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read32(DMA8_XCNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write32(DMA8_XCNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read32(DMA8_XMOD) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write32(DMA8_XMOD, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read32(DMA8_YCNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write32(DMA8_YCNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read32(DMA8_YMOD) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write32(DMA8_YMOD, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_DSCPTR_CUR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_DSCPTR_CUR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_readPTR(DMA8_ADDR_CUR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_ADDR_CUR, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read32(DMA8_STAT) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write32(DMA8_STAT, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read32(DMA8_XCNT_CUR) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write32(DMA8_XCNT_CUR, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read32(DMA8_YCNT_CUR) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write32(DMA8_YCNT_CUR, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_DSCPTR_NXT) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_DSCPTR_NXT, val) +#define bfin_read_DMA9_START_ADDR() bfin_readPTR(DMA9_ADDRSTART) +#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_ADDRSTART, val) +#define bfin_read_DMA9_CONFIG() bfin_read32(DMA9_CFG) +#define bfin_write_DMA9_CONFIG(val) bfin_write32(DMA9_CFG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read32(DMA9_XCNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write32(DMA9_XCNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read32(DMA9_XMOD) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write32(DMA9_XMOD, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read32(DMA9_YCNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write32(DMA9_YCNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read32(DMA9_YMOD) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write32(DMA9_YMOD, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_DSCPTR_CUR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_DSCPTR_CUR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_readPTR(DMA9_ADDR_CUR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_ADDR_CUR, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read32(DMA9_STAT) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write32(DMA9_STAT, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read32(DMA9_XCNT_CUR) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write32(DMA9_XCNT_CUR, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read32(DMA9_YCNT_CUR) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write32(DMA9_YCNT_CUR, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_DSCPTR_NXT) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_DSCPTR_NXT, val) +#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_ADDRSTART) +#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_ADDRSTART, val) +#define bfin_read_DMA10_CONFIG() bfin_read32(DMA10_CFG) +#define bfin_write_DMA10_CONFIG(val) bfin_write32(DMA10_CFG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read32(DMA10_XCNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write32(DMA10_XCNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read32(DMA10_XMOD) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write32(DMA10_XMOD, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read32(DMA10_YCNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write32(DMA10_YCNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read32(DMA10_YMOD) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write32(DMA10_YMOD, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_DSCPTR_CUR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_DSCPTR_CUR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_ADDR_CUR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_ADDR_CUR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read32(DMA10_STAT) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write32(DMA10_STAT, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read32(DMA10_XCNT_CUR) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write32(DMA10_XCNT_CUR, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read32(DMA10_YCNT_CUR) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write32(DMA10_YCNT_CUR, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_DSCPTR_NXT) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_DSCPTR_NXT, val) +#define bfin_read_DMA11_START_ADDR() bfin_readPTR(DMA11_ADDRSTART) +#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_ADDRSTART, val) +#define bfin_read_DMA11_CONFIG() bfin_read32(DMA11_CFG) +#define bfin_write_DMA11_CONFIG(val) bfin_write32(DMA11_CFG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read32(DMA11_XCNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write32(DMA11_XCNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read32(DMA11_XMOD) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write32(DMA11_XMOD, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read32(DMA11_YCNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write32(DMA11_YCNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read32(DMA11_YMOD) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write32(DMA11_YMOD, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_DSCPTR_CUR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_DSCPTR_CUR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_readPTR(DMA11_ADDR_CUR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_ADDR_CUR, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read32(DMA11_STAT) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write32(DMA11_STAT, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read32(DMA11_XCNT_CUR) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write32(DMA11_XCNT_CUR, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read32(DMA11_YCNT_CUR) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write32(DMA11_YCNT_CUR, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA_S0_DSCPTR_NXT) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S0_DSCPTR_NXT, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_readPTR(MDMA_S0_ADDRSTART) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_writePTR(MDMA_S0_ADDRSTART, val) +#define bfin_read_MDMA_S0_CONFIG() bfin_read32(MDMA_S0_CFG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write32(MDMA_S0_CFG, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read32(MDMA_S0_XCNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write32(MDMA_S0_XCNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read32(MDMA_S0_XMOD) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write32(MDMA_S0_XMOD, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read32(MDMA_S0_YCNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write32(MDMA_S0_YCNT, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read32(MDMA_S0_YMOD) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write32(MDMA_S0_YMOD, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_readPTR(MDMA_S0_DSCPTR_CUR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S0_DSCPTR_CUR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_readPTR(MDMA_S0_ADDR_CUR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_writePTR(MDMA_S0_ADDR_CUR, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read32(MDMA_S0_STAT) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write32(MDMA_S0_STAT, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read32(MDMA_S0_XCNT_CUR) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write32(MDMA_S0_XCNT_CUR, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read32(MDMA_S0_YCNT_CUR) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write32(MDMA_S0_YCNT_CUR, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA_D0_DSCPTR_NXT) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D0_DSCPTR_NXT, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_readPTR(MDMA_D0_ADDRSTART) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_writePTR(MDMA_D0_ADDRSTART, val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read32(MDMA_D0_CFG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write32(MDMA_D0_CFG, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read32(MDMA_D0_XCNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write32(MDMA_D0_XCNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read32(MDMA_D0_XMOD) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write32(MDMA_D0_XMOD, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read32(MDMA_D0_YCNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write32(MDMA_D0_YCNT, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read32(MDMA_D0_YMOD) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write32(MDMA_D0_YMOD, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_readPTR(MDMA_D0_DSCPTR_CUR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D0_DSCPTR_CUR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_readPTR(MDMA_D0_ADDR_CUR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_writePTR(MDMA_D0_ADDR_CUR, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read32(MDMA_D0_STAT) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write32(MDMA_D0_STAT, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read32(MDMA_D0_XCNT_CUR) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write32(MDMA_D0_XCNT_CUR, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read32(MDMA_D0_YCNT_CUR) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write32(MDMA_D0_YCNT_CUR, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA_S1_DSCPTR_NXT) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S1_DSCPTR_NXT, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_readPTR(MDMA_S1_ADDRSTART) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_writePTR(MDMA_S1_ADDRSTART, val) +#define bfin_read_MDMA_S1_CONFIG() bfin_read32(MDMA_S1_CFG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write32(MDMA_S1_CFG, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read32(MDMA_S1_XCNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write32(MDMA_S1_XCNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read32(MDMA_S1_XMOD) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write32(MDMA_S1_XMOD, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read32(MDMA_S1_YCNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write32(MDMA_S1_YCNT, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read32(MDMA_S1_YMOD) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write32(MDMA_S1_YMOD, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_readPTR(MDMA_S1_DSCPTR_CUR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S1_DSCPTR_CUR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_readPTR(MDMA_S1_ADDR_CUR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_writePTR(MDMA_S1_ADDR_CUR, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read32(MDMA_S1_STAT) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write32(MDMA_S1_STAT, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read32(MDMA_S1_XCNT_CUR) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write32(MDMA_S1_XCNT_CUR, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read32(MDMA_S1_YCNT_CUR) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write32(MDMA_S1_YCNT_CUR, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA_D1_DSCPTR_NXT) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D1_DSCPTR_NXT, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_readPTR(MDMA_D1_ADDRSTART) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_writePTR(MDMA_D1_ADDRSTART, val) +#define bfin_read_MDMA_D1_CONFIG() bfin_read32(MDMA_D1_CFG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write32(MDMA_D1_CFG, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read32(MDMA_D1_XCNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write32(MDMA_D1_XCNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read32(MDMA_D1_XMOD) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write32(MDMA_D1_XMOD, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read32(MDMA_D1_YCNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write32(MDMA_D1_YCNT, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read32(MDMA_D1_YMOD) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write32(MDMA_D1_YMOD, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_readPTR(MDMA_D1_DSCPTR_CUR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D1_DSCPTR_CUR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_readPTR(MDMA_D1_ADDR_CUR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_writePTR(MDMA_D1_ADDR_CUR, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read32(MDMA_D1_STAT) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write32(MDMA_D1_STAT, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read32(MDMA_D1_XCNT_CUR) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write32(MDMA_D1_XCNT_CUR, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read32(MDMA_D1_YCNT_CUR) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write32(MDMA_D1_YCNT_CUR, val) + +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_CTL() bfin_read32(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write32(WDOG_CTL, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) +#define bfin_read_SPI_BAUD() bfin_read32(SPI0_CLK) +#define bfin_write_SPI_BAUD(val) bfin_write32(SPI0_CLK, val) + +#define bfin_read_PORTD_FER() bfin_read32(PORTD_FER) +#define bfin_write_PORTD_FER_SET(val) bfin_write32(PORTD_FER_SET, val) +#define bfin_write_PORTD_FER_CLR(val) bfin_write32(PORTD_FER_CLR, val) +#define bfin_read_PORTD_MUX() bfin_read32(PORTD_MUX) +#define bfin_write_PORTD_MUX(val) bfin_write32(PORTD_MUX, val) +#define bfin_read_PORTG_FER() bfin_read32(PORTG_FER) +#define bfin_write_PORTG_FER_SET(val) bfin_write32(PORTG_FER_SET, val) +#define bfin_write_PORTG_FER_CLR(val) bfin_write32(PORTG_FER_CLR, val) +#define bfin_read_PORTG_MUX() bfin_read32(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write32(PORTG_MUX, val) + +#define bfin_read_RSI_CLK_CONTROL() bfin_read16(RSI_CLK_CONTROL) +#define bfin_write_RSI_CLK_CONTROL(val) bfin_write16(RSI_CLK_CONTROL, val) +#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) +#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) +#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) +#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) +#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) +#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) +#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) +#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) +#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) +#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) +#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) +#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) +#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) +#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) +#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) +#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) +#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) +#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) +#define bfin_read_RSI_DATA_CONTROL() bfin_read16(RSI_DATA_CONTROL) +#define bfin_write_RSI_DATA_CONTROL(val) bfin_write16(RSI_DATA_CONTROL, val) +#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) +#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) +#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) +#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) +#define bfin_read_RSI_STATUSCL() bfin_read16(RSI_STATUSCL) +#define bfin_write_RSI_STATUSCL(val) bfin_write16(RSI_STATUSCL, val) +#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) +#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) +#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) +#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) +#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) +#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) +#define bfin_read_RSI_CEATA_CONTROL() bfin_read16(RSI_CEATA_CONTROL) +#define bfin_write_RSI_CEATA_CONTROL(val) bfin_write16(RSI_CEATA_CONTROL, val) +#define bfin_read_RSI_BLKSZ() bfin_read16(RSI_BLKSZ) +#define bfin_write_RSI_BLKSZ(val) bfin_write16(RSI_BLKSZ, val) +#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) +#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) +#define bfin_read_RSI_ESTAT() bfin_read32(RSI_ESTAT) +#define bfin_write_RSI_ESTAT(val) bfin_write32(RSI_ESTAT, val) +#define bfin_read_RSI_EMASK() bfin_read32(RSI_EMASK) +#define bfin_write_RSI_EMASK(val) bfin_write32(RSI_EMASK, val) +#define bfin_read_RSI_CONFIG() bfin_read16(RSI_CONFIG) +#define bfin_write_RSI_CONFIG(val) bfin_write16(RSI_CONFIG, val) +#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) +#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) +#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) +#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) +#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) +#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) +#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) +#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) +#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) +#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) + +#endif /* __BFIN_CDEF_ADSP_BF504_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_def.h b/arch/blackfin/include/asm/mach-bf609/BF609_def.h new file mode 100644 index 0000000..9c92a6b --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/BF609_def.h @@ -0,0 +1,3758 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-def-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_DEF_ADSP_BF504_proc__ +#define __BFIN_DEF_ADSP_BF504_proc__ + +#include "../mach-common/ADSP-EDN-core_def.h" + +#define CNT_CFG 0xFFC00400 /* CNT0 Configuration Register */ +#define CNT_IMSK 0xFFC00404 /* CNT0 Interrupt Mask Register */ +#define CNT_STAT 0xFFC00408 /* CNT0 Status Register */ +#define CNT_CMD 0xFFC0040C /* CNT0 Command Register */ +#define CNT_DEBNCE 0xFFC00410 /* CNT0 Debounce Register */ +#define CNT_CNTR 0xFFC00414 /* CNT0 Counter Register */ +#define CNT_MAX 0xFFC00418 /* CNT0 Maximum Count Register */ +#define CNT_MIN 0xFFC0041C /* CNT0 Minimum Count Register */ + +#define RSI_CLK_CONTROL 0xFFC00604 /* RSI0 Clock Control Register */ +#define RSI_ARGUMENT 0xFFC00608 /* RSI0 Argument Register */ +#define RSI_COMMAND 0xFFC0060C /* RSI0 Command Register */ +#define RSI_RESP_CMD 0xFFC00610 /* RSI0 Response Command Register */ +#define RSI_RESPONSE0 0xFFC00614 /* RSI0 Response 0 Register */ +#define RSI_RESPONSE1 0xFFC00618 /* RSI0 Response 1 Register */ +#define RSI_RESPONSE2 0xFFC0061C /* RSI0 Response 2 Register */ +#define RSI_RESPONSE3 0xFFC00620 /* RSI0 Response 3 Register */ +#define RSI_DATA_TIMER 0xFFC00624 /* RSI0 Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC00628 /* RSI0 Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0062C /* RSI0 Data Control Register */ +#define RSI_DATA_CNT 0xFFC00630 /* RSI0 Data Count Register */ +#define RSI_STATUS 0xFFC00634 /* RSI0 Status Register */ +#define RSI_STATUSCL 0xFFC00638 /* RSI0 Status Clear Register */ +#define RSI_IMSK0 0xFFC0063C /* RSI0 Interrupt 0 Mask Register */ +#define RSI_IMSK1 0xFFC00640 /* RSI0 Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC00648 /* RSI0 FIFO Counter Register */ +#define RSI_CEATA_CONTROL 0xFFC0064C /* RSI0 This register contains bit to dis CCS gen */ +#define RSI_BOOT_TCNTR 0xFFC00650 /* RSI0 Boot Timing Counter Register */ +#define RSI_BACK_TOUT 0xFFC00654 /* RSI0 Boot Acknowledge Timeout Register */ +#define RSI_SLP_WKUP_TOUT 0xFFC00658 /* RSI0 Sleep Wakeup Timeout Register */ +#define RSI_BLKSZ 0xFFC0065C /* RSI0 Block Size Register */ +#define RSI_FIFO 0xFFC00680 /* RSI0 Data FIFO Register */ +#define RSI_ESTAT 0xFFC006C0 /* RSI0 Exception Status Register */ +#define RSI_EMASK 0xFFC006C4 /* RSI0 Exception Mask Register */ +#define RSI_CONFIG 0xFFC006C8 /* RSI0 Configuration Register */ +#define RSI_RD_WAIT_EN 0xFFC006CC /* RSI0 Read Wait Enable Register */ +#define RSI_PID0 0xFFC006D0 /* RSI0 Peripheral Identification Register */ +#define RSI_PID1 0xFFC006D4 /* RSI0 Peripheral Identification Register */ +#define RSI_PID2 0xFFC006D8 /* RSI0 Peripheral Identification Register */ +#define RSI_PID3 0xFFC006DC /* RSI0 Peripheral Identification Register */ + +#define CAN0_MC1 0xFFC00A00 /* CAN0 Mailbox Configuration Register 1 */ +#define CAN0_MD1 0xFFC00A04 /* CAN0 Mailbox Direction Register 1 */ +#define CAN0_TRS1 0xFFC00A08 /* CAN0 Transmission Request Set Register 1 */ +#define CAN0_TRR1 0xFFC00A0C /* CAN0 Transmission Request Reset Register 1 */ +#define CAN0_TA1 0xFFC00A10 /* CAN0 Transmission Acknowledge Register 1 */ +#define CAN0_AA1 0xFFC00A14 /* CAN0 Abort Acknowledge Register 1 */ +#define CAN0_RMP1 0xFFC00A18 /* CAN0 Receive Message Pending Register 1 */ +#define CAN0_RML1 0xFFC00A1C /* CAN0 Receive Message Lost Register 1 */ +#define CAN0_MBTIF1 0xFFC00A20 /* CAN0 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN0_MBRIF1 0xFFC00A24 /* CAN0 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN0_MBIM1 0xFFC00A28 /* CAN0 Mailbox Interrupt Mask Register 1 */ +#define CAN0_RFH1 0xFFC00A2C /* CAN0 Remote Frame Handling Register 1 */ +#define CAN0_OPSS1 0xFFC00A30 /* CAN0 Overwrite Protection/Single Shot Transmission Register 1 */ +#define CAN0_MC2 0xFFC00A40 /* CAN0 Mailbox Configuration Register 2 */ +#define CAN0_MD2 0xFFC00A44 /* CAN0 Mailbox Direction Register 2 */ +#define CAN0_TRS2 0xFFC00A48 /* CAN0 Transmission Request Set Register 2 */ +#define CAN0_TRR2 0xFFC00A4C /* CAN0 Transmission Request Reset Register 2 */ +#define CAN0_TA2 0xFFC00A50 /* CAN0 Transmission Acknowledge Register 2 */ +#define CAN0_AA2 0xFFC00A54 /* CAN0 Abort Acknowledge Register 2 */ +#define CAN0_RMP2 0xFFC00A58 /* CAN0 Receive Message Pending Register 2 */ +#define CAN0_RML2 0xFFC00A5C /* CAN0 Receive Message Lost Register 2 */ +#define CAN0_MBTIF2 0xFFC00A60 /* CAN0 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN0_MBRIF2 0xFFC00A64 /* CAN0 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN0_MBIM2 0xFFC00A68 /* CAN0 Mailbox Interrupt Mask Register 2 */ +#define CAN0_RFH2 0xFFC00A6C /* CAN0 Remote Frame Handling Register 2 */ +#define CAN0_OPSS2 0xFFC00A70 /* CAN0 Overwrite Protection/Single Shot Transmission Register 2 */ +#define CAN0_CLK 0xFFC00A80 /* CAN0 Clock Register */ +#define CAN0_TIMING 0xFFC00A84 /* CAN0 Timing Register */ +#define CAN0_DBG 0xFFC00A88 /* CAN0 Debug Register */ +#define CAN0_STAT 0xFFC00A8C /* CAN0 Status Register */ +#define CAN0_CEC 0xFFC00A90 /* CAN0 Error Counter Register */ +#define CAN0_GIS 0xFFC00A94 /* CAN0 Global CAN Interrupt Status */ +#define CAN0_GIM 0xFFC00A98 /* CAN0 Global CAN Interrupt Mask */ +#define CAN0_GIF 0xFFC00A9C /* CAN0 Global CAN Interrupt Flag */ +#define CAN0_CTL 0xFFC00AA0 /* CAN0 CAN Master Control Register */ +#define CAN0_INT 0xFFC00AA4 /* CAN0 Interrupt Pending Register */ +#define CAN0_MBTD 0xFFC00AAC /* CAN0 Temporary Mailbox Disable Register */ +#define CAN0_EWR 0xFFC00AB0 /* CAN0 Error Counter Warning Level Register */ +#define CAN0_ESR 0xFFC00AB4 /* CAN0 Error Status Register */ +#define CAN0_UCCNT 0xFFC00AC4 /* CAN0 Universal Counter Register */ +#define CAN0_UCRC 0xFFC00AC8 /* CAN0 Universal Counter Reload/Capture Register */ +#define CAN0_UCCNF 0xFFC00ACC /* CAN0 Universal Counter Configuration Mode Register */ +#define CAN0_AM00L 0xFFC00B00 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM01L 0xFFC00B08 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM02L 0xFFC00B10 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM03L 0xFFC00B18 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM04L 0xFFC00B20 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM05L 0xFFC00B28 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM06L 0xFFC00B30 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM07L 0xFFC00B38 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM08L 0xFFC00B40 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM09L 0xFFC00B48 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM10L 0xFFC00B50 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM11L 0xFFC00B58 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM12L 0xFFC00B60 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM13L 0xFFC00B68 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM14L 0xFFC00B70 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM15L 0xFFC00B78 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM16L 0xFFC00B80 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM17L 0xFFC00B88 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM18L 0xFFC00B90 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM19L 0xFFC00B98 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM20L 0xFFC00BA0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM21L 0xFFC00BA8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM22L 0xFFC00BB0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM23L 0xFFC00BB8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM24L 0xFFC00BC0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM25L 0xFFC00BC8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM26L 0xFFC00BD0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM27L 0xFFC00BD8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM28L 0xFFC00BE0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM29L 0xFFC00BE8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM30L 0xFFC00BF0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM31L 0xFFC00BF8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM00H 0xFFC00B04 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM01H 0xFFC00B0C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM02H 0xFFC00B14 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM03H 0xFFC00B1C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM04H 0xFFC00B24 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM05H 0xFFC00B2C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM06H 0xFFC00B34 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM07H 0xFFC00B3C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM08H 0xFFC00B44 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM09H 0xFFC00B4C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM10H 0xFFC00B54 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM11H 0xFFC00B5C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM12H 0xFFC00B64 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM13H 0xFFC00B6C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM14H 0xFFC00B74 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM15H 0xFFC00B7C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM16H 0xFFC00B84 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM17H 0xFFC00B8C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM18H 0xFFC00B94 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM19H 0xFFC00B9C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM20H 0xFFC00BA4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM21H 0xFFC00BAC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM22H 0xFFC00BB4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM23H 0xFFC00BBC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM24H 0xFFC00BC4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM25H 0xFFC00BCC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM26H 0xFFC00BD4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM27H 0xFFC00BDC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM28H 0xFFC00BE4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM29H 0xFFC00BEC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM30H 0xFFC00BF4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM31H 0xFFC00BFC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_MB00_DATA0 0xFFC00C00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB01_DATA0 0xFFC00C20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB02_DATA0 0xFFC00C40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB03_DATA0 0xFFC00C60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB04_DATA0 0xFFC00C80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB05_DATA0 0xFFC00CA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB06_DATA0 0xFFC00CC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB07_DATA0 0xFFC00CE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB08_DATA0 0xFFC00D00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB09_DATA0 0xFFC00D20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB10_DATA0 0xFFC00D40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB11_DATA0 0xFFC00D60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB12_DATA0 0xFFC00D80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB13_DATA0 0xFFC00DA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB14_DATA0 0xFFC00DC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB15_DATA0 0xFFC00DE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB16_DATA0 0xFFC00E00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB17_DATA0 0xFFC00E20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB18_DATA0 0xFFC00E40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB19_DATA0 0xFFC00E60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB20_DATA0 0xFFC00E80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB21_DATA0 0xFFC00EA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB22_DATA0 0xFFC00EC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB23_DATA0 0xFFC00EE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB24_DATA0 0xFFC00F00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB25_DATA0 0xFFC00F20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB26_DATA0 0xFFC00F40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB27_DATA0 0xFFC00F60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB28_DATA0 0xFFC00F80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB29_DATA0 0xFFC00FA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB30_DATA0 0xFFC00FC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB31_DATA0 0xFFC00FE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB00_DATA1 0xFFC00C04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB01_DATA1 0xFFC00C24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB02_DATA1 0xFFC00C44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB03_DATA1 0xFFC00C64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB04_DATA1 0xFFC00C84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB05_DATA1 0xFFC00CA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB06_DATA1 0xFFC00CC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB07_DATA1 0xFFC00CE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB08_DATA1 0xFFC00D04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB09_DATA1 0xFFC00D24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB10_DATA1 0xFFC00D44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB11_DATA1 0xFFC00D64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB12_DATA1 0xFFC00D84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB13_DATA1 0xFFC00DA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB14_DATA1 0xFFC00DC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB15_DATA1 0xFFC00DE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB16_DATA1 0xFFC00E04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB17_DATA1 0xFFC00E24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB18_DATA1 0xFFC00E44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB19_DATA1 0xFFC00E64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB20_DATA1 0xFFC00E84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB21_DATA1 0xFFC00EA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB22_DATA1 0xFFC00EC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB23_DATA1 0xFFC00EE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB24_DATA1 0xFFC00F04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB25_DATA1 0xFFC00F24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB26_DATA1 0xFFC00F44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB27_DATA1 0xFFC00F64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB28_DATA1 0xFFC00F84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB29_DATA1 0xFFC00FA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB30_DATA1 0xFFC00FC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB31_DATA1 0xFFC00FE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB00_DATA2 0xFFC00C08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB01_DATA2 0xFFC00C28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB02_DATA2 0xFFC00C48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB03_DATA2 0xFFC00C68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB04_DATA2 0xFFC00C88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB05_DATA2 0xFFC00CA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB06_DATA2 0xFFC00CC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB07_DATA2 0xFFC00CE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB08_DATA2 0xFFC00D08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB09_DATA2 0xFFC00D28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB10_DATA2 0xFFC00D48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB11_DATA2 0xFFC00D68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB12_DATA2 0xFFC00D88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB13_DATA2 0xFFC00DA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB14_DATA2 0xFFC00DC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB15_DATA2 0xFFC00DE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB16_DATA2 0xFFC00E08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB17_DATA2 0xFFC00E28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB18_DATA2 0xFFC00E48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB19_DATA2 0xFFC00E68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB20_DATA2 0xFFC00E88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB21_DATA2 0xFFC00EA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB22_DATA2 0xFFC00EC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB23_DATA2 0xFFC00EE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB24_DATA2 0xFFC00F08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB25_DATA2 0xFFC00F28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB26_DATA2 0xFFC00F48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB27_DATA2 0xFFC00F68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB28_DATA2 0xFFC00F88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB29_DATA2 0xFFC00FA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB30_DATA2 0xFFC00FC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB31_DATA2 0xFFC00FE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB00_DATA3 0xFFC00C0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB01_DATA3 0xFFC00C2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB02_DATA3 0xFFC00C4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB03_DATA3 0xFFC00C6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB04_DATA3 0xFFC00C8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB05_DATA3 0xFFC00CAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB06_DATA3 0xFFC00CCC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB07_DATA3 0xFFC00CEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB08_DATA3 0xFFC00D0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB09_DATA3 0xFFC00D2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB10_DATA3 0xFFC00D4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB11_DATA3 0xFFC00D6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB12_DATA3 0xFFC00D8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB13_DATA3 0xFFC00DAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB14_DATA3 0xFFC00DCC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB15_DATA3 0xFFC00DEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB16_DATA3 0xFFC00E0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB17_DATA3 0xFFC00E2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB18_DATA3 0xFFC00E4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB19_DATA3 0xFFC00E6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB20_DATA3 0xFFC00E8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB21_DATA3 0xFFC00EAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB22_DATA3 0xFFC00ECC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB23_DATA3 0xFFC00EEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB24_DATA3 0xFFC00F0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB25_DATA3 0xFFC00F2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB26_DATA3 0xFFC00F4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB27_DATA3 0xFFC00F6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB28_DATA3 0xFFC00F8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB29_DATA3 0xFFC00FAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB30_DATA3 0xFFC00FCC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB31_DATA3 0xFFC00FEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB00_LENGTH 0xFFC00C10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB01_LENGTH 0xFFC00C30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB02_LENGTH 0xFFC00C50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB03_LENGTH 0xFFC00C70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB04_LENGTH 0xFFC00C90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB05_LENGTH 0xFFC00CB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB06_LENGTH 0xFFC00CD0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB07_LENGTH 0xFFC00CF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB08_LENGTH 0xFFC00D10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB09_LENGTH 0xFFC00D30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB10_LENGTH 0xFFC00D50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB11_LENGTH 0xFFC00D70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB12_LENGTH 0xFFC00D90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB13_LENGTH 0xFFC00DB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB14_LENGTH 0xFFC00DD0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB15_LENGTH 0xFFC00DF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB16_LENGTH 0xFFC00E10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB17_LENGTH 0xFFC00E30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB18_LENGTH 0xFFC00E50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB19_LENGTH 0xFFC00E70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB20_LENGTH 0xFFC00E90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB21_LENGTH 0xFFC00EB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB22_LENGTH 0xFFC00ED0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB23_LENGTH 0xFFC00EF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB24_LENGTH 0xFFC00F10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB25_LENGTH 0xFFC00F30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB26_LENGTH 0xFFC00F50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB27_LENGTH 0xFFC00F70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB28_LENGTH 0xFFC00F90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB29_LENGTH 0xFFC00FB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB30_LENGTH 0xFFC00FD0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB31_LENGTH 0xFFC00FF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB00_TIMESTAMP 0xFFC00C14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB01_TIMESTAMP 0xFFC00C34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB02_TIMESTAMP 0xFFC00C54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB03_TIMESTAMP 0xFFC00C74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB04_TIMESTAMP 0xFFC00C94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB05_TIMESTAMP 0xFFC00CB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB06_TIMESTAMP 0xFFC00CD4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB07_TIMESTAMP 0xFFC00CF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB08_TIMESTAMP 0xFFC00D14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB09_TIMESTAMP 0xFFC00D34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB10_TIMESTAMP 0xFFC00D54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB11_TIMESTAMP 0xFFC00D74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB12_TIMESTAMP 0xFFC00D94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB13_TIMESTAMP 0xFFC00DB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB14_TIMESTAMP 0xFFC00DD4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB15_TIMESTAMP 0xFFC00DF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB16_TIMESTAMP 0xFFC00E14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB17_TIMESTAMP 0xFFC00E34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB18_TIMESTAMP 0xFFC00E54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB19_TIMESTAMP 0xFFC00E74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB20_TIMESTAMP 0xFFC00E94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB21_TIMESTAMP 0xFFC00EB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB22_TIMESTAMP 0xFFC00ED4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB23_TIMESTAMP 0xFFC00EF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB24_TIMESTAMP 0xFFC00F14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB25_TIMESTAMP 0xFFC00F34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB26_TIMESTAMP 0xFFC00F54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB27_TIMESTAMP 0xFFC00F74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB28_TIMESTAMP 0xFFC00F94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB29_TIMESTAMP 0xFFC00FB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB30_TIMESTAMP 0xFFC00FD4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB31_TIMESTAMP 0xFFC00FF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB00_ID0 0xFFC00C18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB01_ID0 0xFFC00C38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB02_ID0 0xFFC00C58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB03_ID0 0xFFC00C78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB04_ID0 0xFFC00C98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB05_ID0 0xFFC00CB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB06_ID0 0xFFC00CD8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB07_ID0 0xFFC00CF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB08_ID0 0xFFC00D18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB09_ID0 0xFFC00D38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB10_ID0 0xFFC00D58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB11_ID0 0xFFC00D78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB12_ID0 0xFFC00D98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB13_ID0 0xFFC00DB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB14_ID0 0xFFC00DD8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB15_ID0 0xFFC00DF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB16_ID0 0xFFC00E18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB17_ID0 0xFFC00E38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB18_ID0 0xFFC00E58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB19_ID0 0xFFC00E78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB20_ID0 0xFFC00E98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB21_ID0 0xFFC00EB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB22_ID0 0xFFC00ED8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB23_ID0 0xFFC00EF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB24_ID0 0xFFC00F18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB25_ID0 0xFFC00F38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB26_ID0 0xFFC00F58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB27_ID0 0xFFC00F78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB28_ID0 0xFFC00F98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB29_ID0 0xFFC00FB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB30_ID0 0xFFC00FD8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB31_ID0 0xFFC00FF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB00_ID1 0xFFC00C1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB01_ID1 0xFFC00C3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB02_ID1 0xFFC00C5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB03_ID1 0xFFC00C7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB04_ID1 0xFFC00C9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB05_ID1 0xFFC00CBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB06_ID1 0xFFC00CDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB07_ID1 0xFFC00CFC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB08_ID1 0xFFC00D1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB09_ID1 0xFFC00D3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB10_ID1 0xFFC00D5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB11_ID1 0xFFC00D7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB12_ID1 0xFFC00D9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB13_ID1 0xFFC00DBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB14_ID1 0xFFC00DDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB15_ID1 0xFFC00DFC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB16_ID1 0xFFC00E1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB17_ID1 0xFFC00E3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB18_ID1 0xFFC00E5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB19_ID1 0xFFC00E7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB20_ID1 0xFFC00E9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB21_ID1 0xFFC00EBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB22_ID1 0xFFC00EDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB23_ID1 0xFFC00EFC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB24_ID1 0xFFC00F1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB25_ID1 0xFFC00F3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB26_ID1 0xFFC00F5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB27_ID1 0xFFC00F7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB28_ID1 0xFFC00F9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB29_ID1 0xFFC00FBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB30_ID1 0xFFC00FDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB31_ID1 0xFFC00FFC /* CAN0 Mailbox Word 7 Register */ +#define LP0_CTL 0xFFC01000 /* LP0 Control Register */ +#define LP0_STAT 0xFFC01004 /* LP0 Status Register */ +#define LP0_DIV 0xFFC01008 /* LP0 Clock Divider Value */ +#define LP0_CNT 0xFFC0100C /* LP0 Current Count Value of Clock Divider */ +#define LP0_TX 0xFFC01010 /* LP0 Transmit Buffer */ +#define LP0_RX 0xFFC01014 /* LP0 Receive Buffer */ +#define LP0_TXIN_SHDW 0xFFC01018 /* LP0 Shadow Input Transmit Buffer */ +#define LP0_TXOUT_SHDW 0xFFC0101C /* LP0 Shadow Output Transmit Buffer */ +#define LP1_CTL 0xFFC01100 /* LP1 Control Register */ +#define LP1_STAT 0xFFC01104 /* LP1 Status Register */ +#define LP1_DIV 0xFFC01108 /* LP1 Clock Divider Value */ +#define LP1_CNT 0xFFC0110C /* LP1 Current Count Value of Clock Divider */ +#define LP1_TX 0xFFC01110 /* LP1 Transmit Buffer */ +#define LP1_RX 0xFFC01114 /* LP1 Receive Buffer */ +#define LP1_TXIN_SHDW 0xFFC01118 /* LP1 Shadow Input Transmit Buffer */ +#define LP1_TXOUT_SHDW 0xFFC0111C /* LP1 Shadow Output Transmit Buffer */ +#define LP2_CTL 0xFFC01200 /* LP2 Control Register */ +#define LP2_STAT 0xFFC01204 /* LP2 Status Register */ +#define LP2_DIV 0xFFC01208 /* LP2 Clock Divider Value */ +#define LP2_CNT 0xFFC0120C /* LP2 Current Count Value of Clock Divider */ +#define LP2_TX 0xFFC01210 /* LP2 Transmit Buffer */ +#define LP2_RX 0xFFC01214 /* LP2 Receive Buffer */ +#define LP2_TXIN_SHDW 0xFFC01218 /* LP2 Shadow Input Transmit Buffer */ +#define LP2_TXOUT_SHDW 0xFFC0121C /* LP2 Shadow Output Transmit Buffer */ +#define LP3_CTL 0xFFC01300 /* LP3 Control Register */ +#define LP3_STAT 0xFFC01304 /* LP3 Status Register */ +#define LP3_DIV 0xFFC01308 /* LP3 Clock Divider Value */ +#define LP3_CNT 0xFFC0130C /* LP3 Current Count Value of Clock Divider */ +#define LP3_TX 0xFFC01310 /* LP3 Transmit Buffer */ +#define LP3_RX 0xFFC01314 /* LP3 Receive Buffer */ +#define LP3_TXIN_SHDW 0xFFC01318 /* LP3 Shadow Input Transmit Buffer */ +#define LP3_TXOUT_SHDW 0xFFC0131C /* LP3 Shadow Output Transmit Buffer */ +#define TIMER0_REVID 0xFFC01400 /* TIMER0 Timer IP Version ID */ +#define TIMER0_RUN 0xFFC01404 /* TIMER0 Timer Run Register */ +#define TIMER0_RUN_SET 0xFFC01408 /* TIMER0 Run Register Alias to Set */ +#define TIMER0_RUN_CLR 0xFFC0140C /* TIMER0 Run Register Alias to Clear */ +#define TIMER0_STOP_CFG 0xFFC01410 /* TIMER0 Stop Config Register */ +#define TIMER0_STOP_CFG_SET 0xFFC01414 /* TIMER0 Stop Config Alias to Set */ +#define TIMER0_STOP_CFG_CLR 0xFFC01418 /* TIMER0 Stop Config Alias to Clear */ +#define TIMER0_DATA_IMSK 0xFFC0141C /* TIMER0 Data Interrupt Mask register */ +#define TIMER0_STAT_IMSK 0xFFC01420 /* TIMER0 Status Interrupt Mask register */ +#define TIMER0_TRG_MSK 0xFFC01424 /* TIMER0 Output Trigger Mask register */ +#define TIMER0_TRG_IE 0xFFC01428 /* TIMER0 Slave Trigger Enable register */ +#define TIMER0_DATA_ILAT 0xFFC0142C /* TIMER0 Data Interrupt Register */ +#define TIMER0_STAT_ILAT 0xFFC01430 /* TIMER0 Status (Error) Interrupt Register */ +#define TIMER0_ERR_TYPE 0xFFC01434 /* TIMER0 Register Indicating Type of Error */ +#define TIMER0_BCAST_PER 0xFFC01438 /* TIMER0 Broadcast Period */ +#define TIMER0_BCAST_WID 0xFFC0143C /* TIMER0 Broadcast Width */ +#define TIMER0_BCAST_DLY 0xFFC01440 /* TIMER0 Broadcast Delay */ +#define TIMER0_TMR0_CFG 0xFFC01460 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR1_CFG 0xFFC01480 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR2_CFG 0xFFC014A0 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR3_CFG 0xFFC014C0 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR4_CFG 0xFFC014E0 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR5_CFG 0xFFC01500 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR6_CFG 0xFFC01520 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR7_CFG 0xFFC01540 /* TIMER0 Per Timer Config Register */ +#define TIMER0_TMR0_CNT 0xFFC01464 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR1_CNT 0xFFC01484 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR2_CNT 0xFFC014A4 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR3_CNT 0xFFC014C4 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR4_CNT 0xFFC014E4 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR5_CNT 0xFFC01504 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR6_CNT 0xFFC01524 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR7_CNT 0xFFC01544 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_TMR0_PER 0xFFC01468 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR1_PER 0xFFC01488 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR2_PER 0xFFC014A8 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR3_PER 0xFFC014C8 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR4_PER 0xFFC014E8 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR5_PER 0xFFC01508 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR6_PER 0xFFC01528 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR7_PER 0xFFC01548 /* TIMER0 Per Timer Period Register */ +#define TIMER0_TMR0_WID 0xFFC0146C /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR1_WID 0xFFC0148C /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR2_WID 0xFFC014AC /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR3_WID 0xFFC014CC /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR4_WID 0xFFC014EC /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR5_WID 0xFFC0150C /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR6_WID 0xFFC0152C /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR7_WID 0xFFC0154C /* TIMER0 Per Timer Width Register */ +#define TIMER0_TMR0_DLY 0xFFC01470 /* TIMER0 Per Timer Delay Register */ +#define TIMER0_TMR1_DLY 0xFFC01490 /* TIMER0 Per Timer Delay Register */ +#define TIMER0_TMR2_DLY 0xFFC014B0 /* TIMER0 Per Timer Delay Register */ +#define TIMER0_TMR3_DLY 0xFFC014D0 /* TIMER0 Per Timer Delay Register */ +#define TIMER0_TMR4_DLY 0xFFC014F0 /* TIMER0 Per Timer Delay Register */ +#define TIMER0_TMR5_DLY 0xFFC01510 /* TIMER0 Per Timer Delay Register */ +#define TIMER0_TMR6_DLY 0xFFC01530 /* TIMER0 Per Timer Delay Register */ +#define TIMER0_TMR7_DLY 0xFFC01550 /* TIMER0 Per Timer Delay Register */ +#define CRC0_CTL 0xFFC01C00 /* CRC0 Control Register */ +#define CRC0_DCNT 0xFFC01C04 /* CRC0 Data Word Count Register */ +#define CRC0_DCNTRLD 0xFFC01C08 /* CRC0 Data Word Count Reload Register */ +#define CRC0_COMP 0xFFC01C14 /* CRC0 DATA Compare Register */ +#define CRC0_FILLVAL 0xFFC01C18 /* CRC0 Fill Value Register */ +#define CRC0_DFIFO 0xFFC01C1C /* CRC0 DATA FIFO Register */ +#define CRC0_INEN 0xFFC01C20 /* CRC0 Interrupt Enable Register */ +#define CRC0_INEN_SET 0xFFC01C24 /* CRC0 Interrupt Enable Set Register */ +#define CRC0_INEN_CLR 0xFFC01C28 /* CRC0 Interrupt Enable Clear Register */ +#define CRC0_POLY 0xFFC01C2C /* CRC0 Polynomial Register */ +#define CRC0_STAT 0xFFC01C40 /* CRC0 Status Register */ +#define CRC0_DCNTCAP 0xFFC01C44 /* CRC0 DATA Count Capture Register */ +#define CRC0_RESULT_FIN 0xFFC01C4C /* CRC0 Final CRC Result Register */ +#define CRC0_RESULT_CUR 0xFFC01C50 /* CRC0 Current CRC Result Register */ +#define CRC0_REVID 0xFFC01C60 /* CRC0 Revision ID Register */ +#define CRC0_LUT0 0xFFC01C84 /* CRC0 Look Up Table Register */ +#define CRC0_LUT1 0xFFC01C88 /* CRC0 Look Up Table Register */ +#define CRC0_LUT2 0xFFC01C8C /* CRC0 Look Up Table Register */ +#define CRC0_LUT3 0xFFC01C90 /* CRC0 Look Up Table Register */ +#define CRC0_LUT4 0xFFC01C94 /* CRC0 Look Up Table Register */ +#define CRC0_LUT5 0xFFC01C98 /* CRC0 Look Up Table Register */ +#define CRC0_LUT6 0xFFC01C9C /* CRC0 Look Up Table Register */ +#define CRC0_LUT7 0xFFC01CA0 /* CRC0 Look Up Table Register */ +#define CRC0_LUT8 0xFFC01CA4 /* CRC0 Look Up Table Register */ +#define CRC0_LUT9 0xFFC01CA8 /* CRC0 Look Up Table Register */ +#define CRC0_LUT10 0xFFC01CAC /* CRC0 Look Up Table Register */ +#define CRC0_LUT11 0xFFC01CB0 /* CRC0 Look Up Table Register */ +#define CRC0_LUT12 0xFFC01CB4 /* CRC0 Look Up Table Register */ +#define CRC0_LUT13 0xFFC01CB8 /* CRC0 Look Up Table Register */ +#define CRC0_LUT14 0xFFC01CBC /* CRC0 Look Up Table Register */ +#define CRC0_LUT15 0xFFC01CC0 /* CRC0 Look Up Table Register */ +#define CRC1_CTL 0xFFC01D00 /* CRC1 Control Register */ +#define CRC1_DCNT 0xFFC01D04 /* CRC1 Data Word Count Register */ +#define CRC1_DCNTRLD 0xFFC01D08 /* CRC1 Data Word Count Reload Register */ +#define CRC1_COMP 0xFFC01D14 /* CRC1 DATA Compare Register */ +#define CRC1_FILLVAL 0xFFC01D18 /* CRC1 Fill Value Register */ +#define CRC1_DFIFO 0xFFC01D1C /* CRC1 DATA FIFO Register */ +#define CRC1_INEN 0xFFC01D20 /* CRC1 Interrupt Enable Register */ +#define CRC1_INEN_SET 0xFFC01D24 /* CRC1 Interrupt Enable Set Register */ +#define CRC1_INEN_CLR 0xFFC01D28 /* CRC1 Interrupt Enable Clear Register */ +#define CRC1_POLY 0xFFC01D2C /* CRC1 Polynomial Register */ +#define CRC1_STAT 0xFFC01D40 /* CRC1 Status Register */ +#define CRC1_DCNTCAP 0xFFC01D44 /* CRC1 DATA Count Capture Register */ +#define CRC1_RESULT_FIN 0xFFC01D4C /* CRC1 Final CRC Result Register */ +#define CRC1_RESULT_CUR 0xFFC01D50 /* CRC1 Current CRC Result Register */ +#define CRC1_REVID 0xFFC01D60 /* CRC1 Revision ID Register */ +#define CRC1_LUT0 0xFFC01D84 /* CRC1 Look Up Table Register */ +#define CRC1_LUT1 0xFFC01D88 /* CRC1 Look Up Table Register */ +#define CRC1_LUT2 0xFFC01D8C /* CRC1 Look Up Table Register */ +#define CRC1_LUT3 0xFFC01D90 /* CRC1 Look Up Table Register */ +#define CRC1_LUT4 0xFFC01D94 /* CRC1 Look Up Table Register */ +#define CRC1_LUT5 0xFFC01D98 /* CRC1 Look Up Table Register */ +#define CRC1_LUT6 0xFFC01D9C /* CRC1 Look Up Table Register */ +#define CRC1_LUT7 0xFFC01DA0 /* CRC1 Look Up Table Register */ +#define CRC1_LUT8 0xFFC01DA4 /* CRC1 Look Up Table Register */ +#define CRC1_LUT9 0xFFC01DA8 /* CRC1 Look Up Table Register */ +#define CRC1_LUT10 0xFFC01DAC /* CRC1 Look Up Table Register */ +#define CRC1_LUT11 0xFFC01DB0 /* CRC1 Look Up Table Register */ +#define CRC1_LUT12 0xFFC01DB4 /* CRC1 Look Up Table Register */ +#define CRC1_LUT13 0xFFC01DB8 /* CRC1 Look Up Table Register */ +#define CRC1_LUT14 0xFFC01DBC /* CRC1 Look Up Table Register */ +#define CRC1_LUT15 0xFFC01DC0 /* CRC1 Look Up Table Register */ +#define TWI0_CLKDIV 0xFFC01E00 /* TWI0 SCL Clock Divider */ +#define TWI0_CTL 0xFFC01E04 /* TWI0 Control Register */ +#define TWI0_SLVCTL 0xFFC01E08 /* TWI0 Slave Mode Control Register */ +#define TWI0_SLVSTAT 0xFFC01E0C /* TWI0 Slave Mode Status Register */ +#define TWI0_SLVADDR 0xFFC01E10 /* TWI0 Slave Mode Address Register */ +#define TWI0_MSTRCTL 0xFFC01E14 /* TWI0 Master Mode Control Registers */ +#define TWI0_MSTRSTAT 0xFFC01E18 /* TWI0 Master Mode Status Register */ +#define TWI0_MSTRADDR 0xFFC01E1C /* TWI0 Master Mode Address Register */ +#define TWI0_ISTAT 0xFFC01E20 /* TWI0 Interrupt Status Register */ +#define TWI0_IMSK 0xFFC01E24 /* TWI0 Interrupt Mask Register */ +#define TWI0_FIFOCTL 0xFFC01E28 /* TWI0 FIFO Control Register */ +#define TWI0_FIFOSTAT 0xFFC01E2C /* TWI0 FIFO Status Register */ +#define TWI0_TXDATA8 0xFFC01E80 /* TWI0 FIFO Transmit Data Single-Byte Register */ +#define TWI0_TXDATA16 0xFFC01E84 /* TWI0 FIFO Transmit Data Double-Byte Register */ +#define TWI0_RXDATA8 0xFFC01E88 /* TWI0 FIFO Transmit Data Single-Byte Register */ +#define TWI0_RXDATA16 0xFFC01E8C /* TWI0 FIFO Transmit Data Double-Byte Register */ +#define TWI1_CLKDIV 0xFFC01F00 /* TWI1 SCL Clock Divider */ +#define TWI1_CTL 0xFFC01F04 /* TWI1 Control Register */ +#define TWI1_SLVCTL 0xFFC01F08 /* TWI1 Slave Mode Control Register */ +#define TWI1_SLVSTAT 0xFFC01F0C /* TWI1 Slave Mode Status Register */ +#define TWI1_SLVADDR 0xFFC01F10 /* TWI1 Slave Mode Address Register */ +#define TWI1_MSTRCTL 0xFFC01F14 /* TWI1 Master Mode Control Registers */ +#define TWI1_MSTRSTAT 0xFFC01F18 /* TWI1 Master Mode Status Register */ +#define TWI1_MSTRADDR 0xFFC01F1C /* TWI1 Master Mode Address Register */ +#define TWI1_ISTAT 0xFFC01F20 /* TWI1 Interrupt Status Register */ +#define TWI1_IMSK 0xFFC01F24 /* TWI1 Interrupt Mask Register */ +#define TWI1_FIFOCTL 0xFFC01F28 /* TWI1 FIFO Control Register */ +#define TWI1_FIFOSTAT 0xFFC01F2C /* TWI1 FIFO Status Register */ +#define TWI1_TXDATA8 0xFFC01F80 /* TWI1 FIFO Transmit Data Single-Byte Register */ +#define TWI1_TXDATA16 0xFFC01F84 /* TWI1 FIFO Transmit Data Double-Byte Register */ +#define TWI1_RXDATA8 0xFFC01F88 /* TWI1 FIFO Transmit Data Single-Byte Register */ +#define TWI1_RXDATA16 0xFFC01F8C /* TWI1 FIFO Transmit Data Double-Byte Register */ +#define UART0_REVID 0xFFC02000 /* UART0 Revision ID Register */ +#define UART0_CTL 0xFFC02004 /* UART0 Control Register */ +#define UART0_STAT 0xFFC02008 /* UART0 Status Register */ +#define UART0_SCR 0xFFC0200C /* UART0 Scratch Register */ +#define UART0_CLK 0xFFC02010 /* UART0 Clock Rate Register */ +#define UART0_IMSK 0xFFC02014 /* UART0 Interrupt Mask Register */ +#define UART0_IMSK_SET 0xFFC02018 /* UART0 Interrupt Mask Set Register */ +#define UART0_IMSK_CLR 0xFFC0201C /* UART0 Interrupt Mask Clear Register */ +#define UART0_RBR 0xFFC02020 /* UART0 Receive Buffer Register */ +#define UART0_THR 0xFFC02024 /* UART0 Transmit Hold Register */ +#define UART0_TAIP 0xFFC02028 /* UART0 Transmit Address/Insert Pulse Register */ +#define UART0_TSR 0xFFC0202C /* UART0 Transmit Shift Register */ +#define UART0_RSR 0xFFC02030 /* UART0 Receive Shift Register */ +#define UART0_TXCNT 0xFFC02034 /* UART0 Transmit Counter Register */ +#define UART0_RXCNT 0xFFC02038 /* UART0 Receive Counter Register */ +#define UART1_REVID 0xFFC02400 /* UART1 Revision ID Register */ +#define UART1_CTL 0xFFC02404 /* UART1 Control Register */ +#define UART1_STAT 0xFFC02408 /* UART1 Status Register */ +#define UART1_SCR 0xFFC0240C /* UART1 Scratch Register */ +#define UART1_CLK 0xFFC02410 /* UART1 Clock Rate Register */ +#define UART1_IMSK 0xFFC02414 /* UART1 Interrupt Mask Register */ +#define UART1_IMSK_SET 0xFFC02418 /* UART1 Interrupt Mask Set Register */ +#define UART1_IMSK_CLR 0xFFC0241C /* UART1 Interrupt Mask Clear Register */ +#define UART1_RBR 0xFFC02420 /* UART1 Receive Buffer Register */ +#define UART1_THR 0xFFC02424 /* UART1 Transmit Hold Register */ +#define UART1_TAIP 0xFFC02428 /* UART1 Transmit Address/Insert Pulse Register */ +#define UART1_TSR 0xFFC0242C /* UART1 Transmit Shift Register */ +#define UART1_RSR 0xFFC02430 /* UART1 Receive Shift Register */ +#define UART1_TXCNT 0xFFC02434 /* UART1 Transmit Counter Register */ +#define UART1_RXCNT 0xFFC02438 /* UART1 Receive Counter Register */ +#define PORTA_FER 0xFFC03000 /* PORTA Port x Function Enable Register */ +#define PORTA_FER_SET 0xFFC03004 /* PORTA Port x Function Enable Set Register */ +#define PORTA_FER_CLR 0xFFC03008 /* PORTA Port x Function Enable Clear Register */ +#define PORTA_DATA 0xFFC0300C /* PORTA Port x GPIO Data Register */ +#define PORTA_DATA_SET 0xFFC03010 /* PORTA Port x GPIO Data Set Register */ +#define PORTA_DATA_CLR 0xFFC03014 /* PORTA Port x GPIO Data Clear Register */ +#define PORTA_DIR 0xFFC03018 /* PORTA Port x GPIO Direction Register */ +#define PORTA_DIR_SET 0xFFC0301C /* PORTA Port x GPIO Direction Set Register */ +#define PORTA_DIR_CLR 0xFFC03020 /* PORTA Port x GPIO Direction Clear Register */ +#define PORTA_INEN 0xFFC03024 /* PORTA Port x GPIO Input Enable Register */ +#define PORTA_INEN_SET 0xFFC03028 /* PORTA Port x GPIO Input Enable Set Register */ +#define PORTA_INEN_CLR 0xFFC0302C /* PORTA Port x GPIO Input Enable Clear Register */ +#define PORTA_MUX 0xFFC03030 /* PORTA Port x Multiplexer Control Register */ +#define PORTA_DATA_TGL 0xFFC03034 /* PORTA Port x GPIO Input Enable Toggle Register */ +#define PORTA_POL 0xFFC03038 /* PORTA Port x GPIO Programming Inversion Register */ +#define PORTA_POL_SET 0xFFC0303C /* PORTA Port x GPIO Programming Inversion Set Register */ +#define PORTA_POL_CLR 0xFFC03040 /* PORTA Port x GPIO Programming Inversion Clear Register */ +#define PORTA_LOCK 0xFFC03044 /* PORTA Port x GPIO Lock Register */ +#define PORTA_REVID 0xFFC0307C /* PORTA Port x GPIO Revision ID */ +#define PORTB_FER 0xFFC03080 /* PORTB Port x Function Enable Register */ +#define PORTB_FER_SET 0xFFC03084 /* PORTB Port x Function Enable Set Register */ +#define PORTB_FER_CLR 0xFFC03088 /* PORTB Port x Function Enable Clear Register */ +#define PORTB_DATA 0xFFC0308C /* PORTB Port x GPIO Data Register */ +#define PORTB_DATA_SET 0xFFC03090 /* PORTB Port x GPIO Data Set Register */ +#define PORTB_DATA_CLR 0xFFC03094 /* PORTB Port x GPIO Data Clear Register */ +#define PORTB_DIR 0xFFC03098 /* PORTB Port x GPIO Direction Register */ +#define PORTB_DIR_SET 0xFFC0309C /* PORTB Port x GPIO Direction Set Register */ +#define PORTB_DIR_CLR 0xFFC030A0 /* PORTB Port x GPIO Direction Clear Register */ +#define PORTB_INEN 0xFFC030A4 /* PORTB Port x GPIO Input Enable Register */ +#define PORTB_INEN_SET 0xFFC030A8 /* PORTB Port x GPIO Input Enable Set Register */ +#define PORTB_INEN_CLR 0xFFC030AC /* PORTB Port x GPIO Input Enable Clear Register */ +#define PORTB_MUX 0xFFC030B0 /* PORTB Port x Multiplexer Control Register */ +#define PORTB_DATA_TGL 0xFFC030B4 /* PORTB Port x GPIO Input Enable Toggle Register */ +#define PORTB_POL 0xFFC030B8 /* PORTB Port x GPIO Programming Inversion Register */ +#define PORTB_POL_SET 0xFFC030BC /* PORTB Port x GPIO Programming Inversion Set Register */ +#define PORTB_POL_CLR 0xFFC030C0 /* PORTB Port x GPIO Programming Inversion Clear Register */ +#define PORTB_LOCK 0xFFC030C4 /* PORTB Port x GPIO Lock Register */ +#define PORTB_REVID 0xFFC030FC /* PORTB Port x GPIO Revision ID */ +#define PORTC_FER 0xFFC03100 /* PORTC Port x Function Enable Register */ +#define PORTC_FER_SET 0xFFC03104 /* PORTC Port x Function Enable Set Register */ +#define PORTC_FER_CLR 0xFFC03108 /* PORTC Port x Function Enable Clear Register */ +#define PORTC_DATA 0xFFC0310C /* PORTC Port x GPIO Data Register */ +#define PORTC_DATA_SET 0xFFC03110 /* PORTC Port x GPIO Data Set Register */ +#define PORTC_DATA_CLR 0xFFC03114 /* PORTC Port x GPIO Data Clear Register */ +#define PORTC_DIR 0xFFC03118 /* PORTC Port x GPIO Direction Register */ +#define PORTC_DIR_SET 0xFFC0311C /* PORTC Port x GPIO Direction Set Register */ +#define PORTC_DIR_CLR 0xFFC03120 /* PORTC Port x GPIO Direction Clear Register */ +#define PORTC_INEN 0xFFC03124 /* PORTC Port x GPIO Input Enable Register */ +#define PORTC_INEN_SET 0xFFC03128 /* PORTC Port x GPIO Input Enable Set Register */ +#define PORTC_INEN_CLR 0xFFC0312C /* PORTC Port x GPIO Input Enable Clear Register */ +#define PORTC_MUX 0xFFC03130 /* PORTC Port x Multiplexer Control Register */ +#define PORTC_DATA_TGL 0xFFC03134 /* PORTC Port x GPIO Input Enable Toggle Register */ +#define PORTC_POL 0xFFC03138 /* PORTC Port x GPIO Programming Inversion Register */ +#define PORTC_POL_SET 0xFFC0313C /* PORTC Port x GPIO Programming Inversion Set Register */ +#define PORTC_POL_CLR 0xFFC03140 /* PORTC Port x GPIO Programming Inversion Clear Register */ +#define PORTC_LOCK 0xFFC03144 /* PORTC Port x GPIO Lock Register */ +#define PORTC_REVID 0xFFC0317C /* PORTC Port x GPIO Revision ID */ +#define PORTD_FER 0xFFC03180 /* PORTD Port x Function Enable Register */ +#define PORTD_FER_SET 0xFFC03184 /* PORTD Port x Function Enable Set Register */ +#define PORTD_FER_CLR 0xFFC03188 /* PORTD Port x Function Enable Clear Register */ +#define PORTD_DATA 0xFFC0318C /* PORTD Port x GPIO Data Register */ +#define PORTD_DATA_SET 0xFFC03190 /* PORTD Port x GPIO Data Set Register */ +#define PORTD_DATA_CLR 0xFFC03194 /* PORTD Port x GPIO Data Clear Register */ +#define PORTD_DIR 0xFFC03198 /* PORTD Port x GPIO Direction Register */ +#define PORTD_DIR_SET 0xFFC0319C /* PORTD Port x GPIO Direction Set Register */ +#define PORTD_DIR_CLR 0xFFC031A0 /* PORTD Port x GPIO Direction Clear Register */ +#define PORTD_INEN 0xFFC031A4 /* PORTD Port x GPIO Input Enable Register */ +#define PORTD_INEN_SET 0xFFC031A8 /* PORTD Port x GPIO Input Enable Set Register */ +#define PORTD_INEN_CLR 0xFFC031AC /* PORTD Port x GPIO Input Enable Clear Register */ +#define PORTD_MUX 0xFFC031B0 /* PORTD Port x Multiplexer Control Register */ +#define PORTD_DATA_TGL 0xFFC031B4 /* PORTD Port x GPIO Input Enable Toggle Register */ +#define PORTD_POL 0xFFC031B8 /* PORTD Port x GPIO Programming Inversion Register */ +#define PORTD_POL_SET 0xFFC031BC /* PORTD Port x GPIO Programming Inversion Set Register */ +#define PORTD_POL_CLR 0xFFC031C0 /* PORTD Port x GPIO Programming Inversion Clear Register */ +#define PORTD_LOCK 0xFFC031C4 /* PORTD Port x GPIO Lock Register */ +#define PORTD_REVID 0xFFC031FC /* PORTD Port x GPIO Revision ID */ +#define PORTE_FER 0xFFC03200 /* PORTE Port x Function Enable Register */ +#define PORTE_FER_SET 0xFFC03204 /* PORTE Port x Function Enable Set Register */ +#define PORTE_FER_CLR 0xFFC03208 /* PORTE Port x Function Enable Clear Register */ +#define PORTE_DATA 0xFFC0320C /* PORTE Port x GPIO Data Register */ +#define PORTE_DATA_SET 0xFFC03210 /* PORTE Port x GPIO Data Set Register */ +#define PORTE_DATA_CLR 0xFFC03214 /* PORTE Port x GPIO Data Clear Register */ +#define PORTE_DIR 0xFFC03218 /* PORTE Port x GPIO Direction Register */ +#define PORTE_DIR_SET 0xFFC0321C /* PORTE Port x GPIO Direction Set Register */ +#define PORTE_DIR_CLR 0xFFC03220 /* PORTE Port x GPIO Direction Clear Register */ +#define PORTE_INEN 0xFFC03224 /* PORTE Port x GPIO Input Enable Register */ +#define PORTE_INEN_SET 0xFFC03228 /* PORTE Port x GPIO Input Enable Set Register */ +#define PORTE_INEN_CLR 0xFFC0322C /* PORTE Port x GPIO Input Enable Clear Register */ +#define PORTE_MUX 0xFFC03230 /* PORTE Port x Multiplexer Control Register */ +#define PORTE_DATA_TGL 0xFFC03234 /* PORTE Port x GPIO Input Enable Toggle Register */ +#define PORTE_POL 0xFFC03238 /* PORTE Port x GPIO Programming Inversion Register */ +#define PORTE_POL_SET 0xFFC0323C /* PORTE Port x GPIO Programming Inversion Set Register */ +#define PORTE_POL_CLR 0xFFC03240 /* PORTE Port x GPIO Programming Inversion Clear Register */ +#define PORTE_LOCK 0xFFC03244 /* PORTE Port x GPIO Lock Register */ +#define PORTE_REVID 0xFFC0327C /* PORTE Port x GPIO Revision ID */ +#define PORTF_FER 0xFFC03280 /* PORTF Port x Function Enable Register */ +#define PORTF_FER_SET 0xFFC03284 /* PORTF Port x Function Enable Set Register */ +#define PORTF_FER_CLR 0xFFC03288 /* PORTF Port x Function Enable Clear Register */ +#define PORTF_DATA 0xFFC0328C /* PORTF Port x GPIO Data Register */ +#define PORTF_DATA_SET 0xFFC03290 /* PORTF Port x GPIO Data Set Register */ +#define PORTF_DATA_CLR 0xFFC03294 /* PORTF Port x GPIO Data Clear Register */ +#define PORTF_DIR 0xFFC03298 /* PORTF Port x GPIO Direction Register */ +#define PORTF_DIR_SET 0xFFC0329C /* PORTF Port x GPIO Direction Set Register */ +#define PORTF_DIR_CLR 0xFFC032A0 /* PORTF Port x GPIO Direction Clear Register */ +#define PORTF_INEN 0xFFC032A4 /* PORTF Port x GPIO Input Enable Register */ +#define PORTF_INEN_SET 0xFFC032A8 /* PORTF Port x GPIO Input Enable Set Register */ +#define PORTF_INEN_CLR 0xFFC032AC /* PORTF Port x GPIO Input Enable Clear Register */ +#define PORTF_MUX 0xFFC032B0 /* PORTF Port x Multiplexer Control Register */ +#define PORTF_DATA_TGL 0xFFC032B4 /* PORTF Port x GPIO Input Enable Toggle Register */ +#define PORTF_POL 0xFFC032B8 /* PORTF Port x GPIO Programming Inversion Register */ +#define PORTF_POL_SET 0xFFC032BC /* PORTF Port x GPIO Programming Inversion Set Register */ +#define PORTF_POL_CLR 0xFFC032C0 /* PORTF Port x GPIO Programming Inversion Clear Register */ +#define PORTF_LOCK 0xFFC032C4 /* PORTF Port x GPIO Lock Register */ +#define PORTF_REVID 0xFFC032FC /* PORTF Port x GPIO Revision ID */ +#define PORTG_FER 0xFFC03300 /* PORTG Port x Function Enable Register */ +#define PORTG_FER_SET 0xFFC03304 /* PORTG Port x Function Enable Set Register */ +#define PORTG_FER_CLR 0xFFC03308 /* PORTG Port x Function Enable Clear Register */ +#define PORTG_DATA 0xFFC0330C /* PORTG Port x GPIO Data Register */ +#define PORTG_DATA_SET 0xFFC03310 /* PORTG Port x GPIO Data Set Register */ +#define PORTG_DATA_CLR 0xFFC03314 /* PORTG Port x GPIO Data Clear Register */ +#define PORTG_DIR 0xFFC03318 /* PORTG Port x GPIO Direction Register */ +#define PORTG_DIR_SET 0xFFC0331C /* PORTG Port x GPIO Direction Set Register */ +#define PORTG_DIR_CLR 0xFFC03320 /* PORTG Port x GPIO Direction Clear Register */ +#define PORTG_INEN 0xFFC03324 /* PORTG Port x GPIO Input Enable Register */ +#define PORTG_INEN_SET 0xFFC03328 /* PORTG Port x GPIO Input Enable Set Register */ +#define PORTG_INEN_CLR 0xFFC0332C /* PORTG Port x GPIO Input Enable Clear Register */ +#define PORTG_MUX 0xFFC03330 /* PORTG Port x Multiplexer Control Register */ +#define PORTG_DATA_TGL 0xFFC03334 /* PORTG Port x GPIO Input Enable Toggle Register */ +#define PORTG_POL 0xFFC03338 /* PORTG Port x GPIO Programming Inversion Register */ +#define PORTG_POL_SET 0xFFC0333C /* PORTG Port x GPIO Programming Inversion Set Register */ +#define PORTG_POL_CLR 0xFFC03340 /* PORTG Port x GPIO Programming Inversion Clear Register */ +#define PORTG_LOCK 0xFFC03344 /* PORTG Port x GPIO Lock Register */ +#define PORTG_REVID 0xFFC0337C /* PORTG Port x GPIO Revision ID */ +#define PADS0_EMAC_PTP_CLKSEL 0xFFC03404 /* PADS0 Clock Selection for EMAC and PTP */ +#define PADS0_TWI_VSEL 0xFFC03408 /* PADS0 TWI Voltage Selection */ +#define PADS0_PORTS_DS 0xFFC03420 /* PADS0 Voltage Domain Control Register */ +#define PADS0_NONPORTS_DS 0xFFC03424 /* PADS0 Non-GPIO Drive Strength */ +#define PADS0_PORTS_HYST 0xFFC03440 /* PADS0 Hysteresis Enable Register */ +#define PINT0_MSK_SET 0xFFC04000 /* PINT0 Pint Mask Set Register */ +#define PINT0_MSK_CLR 0xFFC04004 /* PINT0 Pint Mask Clear Register */ +#define PINT0_REQ 0xFFC04008 /* PINT0 Pint Request Register */ +#define PINT0_ASSIGN 0xFFC0400C /* PINT0 Pint Assign Register */ +#define PINT0_EDGE_SET 0xFFC04010 /* PINT0 Pint Edge Set Register */ +#define PINT0_EDGE_CLR 0xFFC04014 /* PINT0 Pint Edge Clear Register */ +#define PINT0_INV_SET 0xFFC04018 /* PINT0 Pint Invert Set Register */ +#define PINT0_INV_CLR 0xFFC0401C /* PINT0 Pint Invert Clear Register */ +#define PINT0_PINSTATE 0xFFC04020 /* PINT0 Pint Pinstate Register */ +#define PINT0_LATCH 0xFFC04024 /* PINT0 Pint Latch Register */ +#define PINT1_MSK_SET 0xFFC04100 /* PINT1 Pint Mask Set Register */ +#define PINT1_MSK_CLR 0xFFC04104 /* PINT1 Pint Mask Clear Register */ +#define PINT1_REQ 0xFFC04108 /* PINT1 Pint Request Register */ +#define PINT1_ASSIGN 0xFFC0410C /* PINT1 Pint Assign Register */ +#define PINT1_EDGE_SET 0xFFC04110 /* PINT1 Pint Edge Set Register */ +#define PINT1_EDGE_CLR 0xFFC04114 /* PINT1 Pint Edge Clear Register */ +#define PINT1_INV_SET 0xFFC04118 /* PINT1 Pint Invert Set Register */ +#define PINT1_INV_CLR 0xFFC0411C /* PINT1 Pint Invert Clear Register */ +#define PINT1_PINSTATE 0xFFC04120 /* PINT1 Pint Pinstate Register */ +#define PINT1_LATCH 0xFFC04124 /* PINT1 Pint Latch Register */ +#define PINT2_MSK_SET 0xFFC04200 /* PINT2 Pint Mask Set Register */ +#define PINT2_MSK_CLR 0xFFC04204 /* PINT2 Pint Mask Clear Register */ +#define PINT2_REQ 0xFFC04208 /* PINT2 Pint Request Register */ +#define PINT2_ASSIGN 0xFFC0420C /* PINT2 Pint Assign Register */ +#define PINT2_EDGE_SET 0xFFC04210 /* PINT2 Pint Edge Set Register */ +#define PINT2_EDGE_CLR 0xFFC04214 /* PINT2 Pint Edge Clear Register */ +#define PINT2_INV_SET 0xFFC04218 /* PINT2 Pint Invert Set Register */ +#define PINT2_INV_CLR 0xFFC0421C /* PINT2 Pint Invert Clear Register */ +#define PINT2_PINSTATE 0xFFC04220 /* PINT2 Pint Pinstate Register */ +#define PINT2_LATCH 0xFFC04224 /* PINT2 Pint Latch Register */ +#define PINT3_MSK_SET 0xFFC04300 /* PINT3 Pint Mask Set Register */ +#define PINT3_MSK_CLR 0xFFC04304 /* PINT3 Pint Mask Clear Register */ +#define PINT3_REQ 0xFFC04308 /* PINT3 Pint Request Register */ +#define PINT3_ASSIGN 0xFFC0430C /* PINT3 Pint Assign Register */ +#define PINT3_EDGE_SET 0xFFC04310 /* PINT3 Pint Edge Set Register */ +#define PINT3_EDGE_CLR 0xFFC04314 /* PINT3 Pint Edge Clear Register */ +#define PINT3_INV_SET 0xFFC04318 /* PINT3 Pint Invert Set Register */ +#define PINT3_INV_CLR 0xFFC0431C /* PINT3 Pint Invert Clear Register */ +#define PINT3_PINSTATE 0xFFC04320 /* PINT3 Pint Pinstate Register */ +#define PINT3_LATCH 0xFFC04324 /* PINT3 Pint Latch Register */ +#define PINT4_MSK_SET 0xFFC04400 /* PINT4 Pint Mask Set Register */ +#define PINT4_MSK_CLR 0xFFC04404 /* PINT4 Pint Mask Clear Register */ +#define PINT4_REQ 0xFFC04408 /* PINT4 Pint Request Register */ +#define PINT4_ASSIGN 0xFFC0440C /* PINT4 Pint Assign Register */ +#define PINT4_EDGE_SET 0xFFC04410 /* PINT4 Pint Edge Set Register */ +#define PINT4_EDGE_CLR 0xFFC04414 /* PINT4 Pint Edge Clear Register */ +#define PINT4_INV_SET 0xFFC04418 /* PINT4 Pint Invert Set Register */ +#define PINT4_INV_CLR 0xFFC0441C /* PINT4 Pint Invert Clear Register */ +#define PINT4_PINSTATE 0xFFC04420 /* PINT4 Pint Pinstate Register */ +#define PINT4_LATCH 0xFFC04424 /* PINT4 Pint Latch Register */ +#define PINT5_MSK_SET 0xFFC04500 /* PINT5 Pint Mask Set Register */ +#define PINT5_MSK_CLR 0xFFC04504 /* PINT5 Pint Mask Clear Register */ +#define PINT5_REQ 0xFFC04508 /* PINT5 Pint Request Register */ +#define PINT5_ASSIGN 0xFFC0450C /* PINT5 Pint Assign Register */ +#define PINT5_EDGE_SET 0xFFC04510 /* PINT5 Pint Edge Set Register */ +#define PINT5_EDGE_CLR 0xFFC04514 /* PINT5 Pint Edge Clear Register */ +#define PINT5_INV_SET 0xFFC04518 /* PINT5 Pint Invert Set Register */ +#define PINT5_INV_CLR 0xFFC0451C /* PINT5 Pint Invert Clear Register */ +#define PINT5_PINSTATE 0xFFC04520 /* PINT5 Pint Pinstate Register */ +#define PINT5_LATCH 0xFFC04524 /* PINT5 Pint Latch Register */ +#define SMC_GCTL 0xFFC16004 /* SMC0 SMC Control Register */ +#define SMC_GSTAT 0xFFC16008 /* SMC0 SMC Status Register */ +#define SMC_B0CTL 0xFFC1600C /* SMC0 SMC Bank0 Control Register */ +#define SMC_B0TIM 0xFFC16010 /* SMC0 SMC Bank0 Timing Register */ +#define SMC_B0ETIM 0xFFC16014 /* SMC0 SMC Bank0 Extended Timing Register */ +#define SMC_B1CTL 0xFFC1601C /* SMC0 SMC BANK1 Control Register */ +#define SMC_B1TIM 0xFFC16020 /* SMC0 SMC BANK1 Timing Register */ +#define SMC_B1ETIM 0xFFC16024 /* SMC0 SMC BANK1 Extended Timing Register */ +#define SMC_B2CTL 0xFFC1602C /* SMC0 SMC BANK2 Control Register */ +#define SMC_B2TIM 0xFFC16030 /* SMC0 SMC BANK2 Timing Register */ +#define SMC_B2ETIM 0xFFC16034 /* SMC0 SMC BANK2 Extended Timing Register */ +#define SMC_B3CTL 0xFFC1603C /* SMC0 SMC BANK3 Control Register */ +#define SMC_B3TIM 0xFFC16040 /* SMC0 SMC BANK3 Timing Register */ +#define SMC_B3ETIM 0xFFC16044 /* SMC0 SMC BANK3 Extended Timing Register */ +#define WDOG_CTL 0xFFC17000 /* WDOG0 Control Register */ +#define WDOG_CNT 0xFFC17004 /* WDOG0 Count Register */ +#define WDOG_STAT 0xFFC17008 /* WDOG0 Watchdog Timer Status Register */ +#define WDOG1_CTL 0xFFC17800 /* WDOG1 Control Register */ +#define WDOG1_CNT 0xFFC17804 /* WDOG1 Count Register */ +#define WDOG1_STAT 0xFFC17808 /* WDOG1 Watchdog Timer Status Register */ +#define EPPI0_STAT 0xFFC18000 /* EPPI0 Status Register */ +#define EPPI0_HCNT 0xFFC18004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDLY 0xFFC18008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCNT 0xFFC1800C /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDLY 0xFFC18010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xFFC18014 /* EPPI0 Lines Per Frame Register */ +#define EPPI0_LINE 0xFFC18018 /* EPPI0 Samples Per Line Register */ +#define EPPI0_CLKDIV 0xFFC1801C /* EPPI0 Clock Divide Register */ +#define EPPI0_CTL 0xFFC18020 /* EPPI0 Control Register */ +#define EPPI0_FS1_WLHB 0xFFC18024 /* EPPI0 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1_PASPL 0xFFC18028 /* EPPI0 FS1 Period Register / EPPI Active Samples Per Line Register */ +#define EPPI0_FS2_WLVB 0xFFC1802C /* EPPI0 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */ +#define EPPI0_FS2_PALPF 0xFFC18030 /* EPPI0 FS2 Period Register / EPPI Active Lines Per Field Register */ +#define EPPI0_IMSK 0xFFC18034 /* EPPI0 Interrupt Mask Register */ +#define EPPI0_ODDCLIP 0xFFC1803C /* EPPI0 Clipping Register for ODD (Chroma) Data */ +#define EPPI0_EVENCLIP 0xFFC18040 /* EPPI0 Clipping Register for EVEN (Luma) Data */ +#define EPPI0_FS1_DLY 0xFFC18044 /* EPPI0 Frame Sync 1 Delay Value */ +#define EPPI0_FS2_DLY 0xFFC18048 /* EPPI0 Frame Sync 2 Delay Value */ +#define EPPI0_CTL2 0xFFC1804C /* EPPI0 Control Register 2 */ +#define EPPI1_STAT 0xFFC18400 /* EPPI1 Status Register */ +#define EPPI1_HCNT 0xFFC18404 /* EPPI1 Horizontal Transfer Count Register */ +#define EPPI1_HDLY 0xFFC18408 /* EPPI1 Horizontal Delay Count Register */ +#define EPPI1_VCNT 0xFFC1840C /* EPPI1 Vertical Transfer Count Register */ +#define EPPI1_VDLY 0xFFC18410 /* EPPI1 Vertical Delay Count Register */ +#define EPPI1_FRAME 0xFFC18414 /* EPPI1 Lines Per Frame Register */ +#define EPPI1_LINE 0xFFC18418 /* EPPI1 Samples Per Line Register */ +#define EPPI1_CLKDIV 0xFFC1841C /* EPPI1 Clock Divide Register */ +#define EPPI1_CTL 0xFFC18420 /* EPPI1 Control Register */ +#define EPPI1_FS1_WLHB 0xFFC18424 /* EPPI1 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */ +#define EPPI1_FS1_PASPL 0xFFC18428 /* EPPI1 FS1 Period Register / EPPI Active Samples Per Line Register */ +#define EPPI1_FS2_WLVB 0xFFC1842C /* EPPI1 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */ +#define EPPI1_FS2_PALPF 0xFFC18430 /* EPPI1 FS2 Period Register / EPPI Active Lines Per Field Register */ +#define EPPI1_IMSK 0xFFC18434 /* EPPI1 Interrupt Mask Register */ +#define EPPI1_ODDCLIP 0xFFC1843C /* EPPI1 Clipping Register for ODD (Chroma) Data */ +#define EPPI1_EVENCLIP 0xFFC18440 /* EPPI1 Clipping Register for EVEN (Luma) Data */ +#define EPPI1_FS1_DLY 0xFFC18444 /* EPPI1 Frame Sync 1 Delay Value */ +#define EPPI1_FS2_DLY 0xFFC18448 /* EPPI1 Frame Sync 2 Delay Value */ +#define EPPI1_CTL2 0xFFC1844C /* EPPI1 Control Register 2 */ +#define EPPI2_STAT 0xFFC18800 /* EPPI2 Status Register */ +#define EPPI2_HCNT 0xFFC18804 /* EPPI2 Horizontal Transfer Count Register */ +#define EPPI2_HDLY 0xFFC18808 /* EPPI2 Horizontal Delay Count Register */ +#define EPPI2_VCNT 0xFFC1880C /* EPPI2 Vertical Transfer Count Register */ +#define EPPI2_VDLY 0xFFC18810 /* EPPI2 Vertical Delay Count Register */ +#define EPPI2_FRAME 0xFFC18814 /* EPPI2 Lines Per Frame Register */ +#define EPPI2_LINE 0xFFC18818 /* EPPI2 Samples Per Line Register */ +#define EPPI2_CLKDIV 0xFFC1881C /* EPPI2 Clock Divide Register */ +#define EPPI2_CTL 0xFFC18820 /* EPPI2 Control Register */ +#define EPPI2_FS1_WLHB 0xFFC18824 /* EPPI2 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */ +#define EPPI2_FS1_PASPL 0xFFC18828 /* EPPI2 FS1 Period Register / EPPI Active Samples Per Line Register */ +#define EPPI2_FS2_WLVB 0xFFC1882C /* EPPI2 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */ +#define EPPI2_FS2_PALPF 0xFFC18830 /* EPPI2 FS2 Period Register / EPPI Active Lines Per Field Register */ +#define EPPI2_IMSK 0xFFC18834 /* EPPI2 Interrupt Mask Register */ +#define EPPI2_ODDCLIP 0xFFC1883C /* EPPI2 Clipping Register for ODD (Chroma) Data */ +#define EPPI2_EVENCLIP 0xFFC18840 /* EPPI2 Clipping Register for EVEN (Luma) Data */ +#define EPPI2_FS1_DLY 0xFFC18844 /* EPPI2 Frame Sync 1 Delay Value */ +#define EPPI2_FS2_DLY 0xFFC18848 /* EPPI2 Frame Sync 2 Delay Value */ +#define EPPI2_CTL2 0xFFC1884C /* EPPI2 Control Register 2 */ +#define PIXC0_CTL 0xFFC19000 /* PIXC0 Control Register */ +#define PIXC0_PPL 0xFFC19004 /* PIXC0 Pixels Per Line Register */ +#define PIXC0_LPF 0xFFC19008 /* PIXC0 Line Per Frame Register */ +#define PIXC0_HSTART_A 0xFFC1900C /* PIXC0 Overlay A Horizontal Start Register */ +#define PIXC0_HEND_A 0xFFC19010 /* PIXC0 Overlay A Horizontal End Register */ +#define PIXC0_VSTART_A 0xFFC19014 /* PIXC0 Overlay A Vertical Start Register */ +#define PIXC0_VEND_A 0xFFC19018 /* PIXC0 Overlay A Vertical End Register */ +#define PIXC0_TRANSP_A 0xFFC1901C /* PIXC0 Overlay A Transparency Ratio Register */ +#define PIXC0_HSTART_B 0xFFC19020 /* PIXC0 Overlay B Horizontal Start Register */ +#define PIXC0_HEND_B 0xFFC19024 /* PIXC0 Overlay B Horizontal End Register */ +#define PIXC0_VSTART_B 0xFFC19028 /* PIXC0 Overlay B Vertical Start Register */ +#define PIXC0_VEND_B 0xFFC1902C /* PIXC0 Overlay B Vertical End Register */ +#define PIXC0_TRANSP_B 0xFFC19030 /* PIXC0 Overlay B Transparency Ratio Register */ +#define PIXC0_IRQSTAT 0xFFC1903C /* PIXC0 Interrupt Status Register */ +#define PIXC0_CONRY 0xFFC19040 /* PIXC0 RY Conversion Component Register */ +#define PIXC0_CONGU 0xFFC19044 /* PIXC0 GU Conversion Component Register */ +#define PIXC0_CONBV 0xFFC19048 /* PIXC0 BV Conversion Component Register */ +#define PIXC0_CCBIAS 0xFFC1904C /* PIXC0 Conversion Bias Register */ +#define PIXC0_TC 0xFFC19050 /* PIXC0 Transparency Register */ +#define PIXC0_REVID 0xFFC19054 /* PIXC0 PIXC Revision Id */ +#define PVP0_REVID 0xFFC1A000 /* PVP0 Revision ID */ +#define PVP0_CTL 0xFFC1A004 /* PVP0 Control */ +#define PVP0_IMSK0 0xFFC1A008 /* PVP0 INTn interrupt line masks */ +#define PVP0_IMSK1 0xFFC1A00C /* PVP0 INTn interrupt line masks */ +#define PVP0_STAT 0xFFC1A010 /* PVP0 Status */ +#define PVP0_ILAT 0xFFC1A014 /* PVP0 Latched status */ +#define PVP0_IREQ0 0xFFC1A018 /* PVP0 INT0 masked latched status */ +#define PVP0_IREQ1 0xFFC1A01C /* PVP0 INT0 masked latched status */ +#define PVP0_OPF0_CFG 0xFFC1A020 /* PVP0 Config */ +#define PVP0_OPF1_CFG 0xFFC1A040 /* PVP0 Config */ +#define PVP0_OPF2_CFG 0xFFC1A060 /* PVP0 Config */ +#define PVP0_OPF0_CTL 0xFFC1A024 /* PVP0 Control */ +#define PVP0_OPF1_CTL 0xFFC1A044 /* PVP0 Control */ +#define PVP0_OPF2_CTL 0xFFC1A064 /* PVP0 Control */ +#define PVP0_OPF3_CFG 0xFFC1A080 /* PVP0 Config */ +#define PVP0_OPF3_CTL 0xFFC1A084 /* PVP0 Control */ +#define PVP0_PEC_CFG 0xFFC1A0A0 /* PVP0 Config */ +#define PVP0_PEC_CTL 0xFFC1A0A4 /* PVP0 Control */ +#define PVP0_PEC_D1TH0 0xFFC1A0A8 /* PVP0 Lower Hysteresis Threshold */ +#define PVP0_PEC_D1TH1 0xFFC1A0AC /* PVP0 Upper Hysteresis Threshold */ +#define PVP0_PEC_D2TH0 0xFFC1A0B0 /* PVP0 Weak Zero Crossing Threshold */ +#define PVP0_PEC_D2TH1 0xFFC1A0B4 /* PVP0 Strong Zero Crossing Threshold */ +#define PVP0_IIM0_CFG 0xFFC1A0C0 /* PVP0 Config */ +#define PVP0_IIM1_CFG 0xFFC1A0E0 /* PVP0 Config */ +#define PVP0_IIM0_CTL 0xFFC1A0C4 /* PVP0 Control */ +#define PVP0_IIM1_CTL 0xFFC1A0E4 /* PVP0 Control */ +#define PVP0_IIM0_SCALE 0xFFC1A0C8 /* PVP0 Scaler Values */ +#define PVP0_IIM1_SCALE 0xFFC1A0E8 /* PVP0 Scaler Values */ +#define PVP0_IIM0_SOVF_STAT 0xFFC1A0CC /* PVP0 Signed Overflow Status */ +#define PVP0_IIM1_SOVF_STAT 0xFFC1A0EC /* PVP0 Signed Overflow Status */ +#define PVP0_IIM0_UOVF_STAT 0xFFC1A0D0 /* PVP0 Unsigned Overflow Status */ +#define PVP0_IIM1_UOVF_STAT 0xFFC1A0F0 /* PVP0 Unsigned Overflow Status */ +#define PVP0_ACU_CFG 0xFFC1A100 /* PVP0 ACU Configuration Register */ +#define PVP0_ACU_CTL 0xFFC1A104 /* PVP0 ACU Control Register */ +#define PVP0_ACU_OFFSET 0xFFC1A108 /* PVP0 SUM constant register */ +#define PVP0_ACU_FACTOR 0xFFC1A10C /* PVP0 PROD constant register */ +#define PVP0_ACU_SHIFT 0xFFC1A110 /* PVP0 Shift constant register */ +#define PVP0_ACU_MIN 0xFFC1A114 /* PVP0 Lower saturation threshold set to MIN */ +#define PVP0_ACU_MAX 0xFFC1A118 /* PVP0 Upper saturation threshold set to MAX */ +#define PVP0_UDS_CFG 0xFFC1A140 /* PVP0 UDS Configuration Register */ +#define PVP0_UDS_CTL 0xFFC1A144 /* PVP0 UDS Control Register */ +#define PVP0_UDS_OHCNT 0xFFC1A148 /* PVP0 UDS Output H Dimension */ +#define PVP0_UDS_OVCNT 0xFFC1A14C /* PVP0 UDS Output V Dimension */ +#define PVP0_UDS_HAVG 0xFFC1A150 /* PVP0 UDS H Taps */ +#define PVP0_UDS_VAVG 0xFFC1A154 /* PVP0 UDS V Taps */ +#define PVP0_IPF0_CFG 0xFFC1A180 /* PVP0 Configuration */ +#define PVP0_IPF0_PIPECTL 0xFFC1A184 /* PVP0 Pipe Control */ +#define PVP0_IPF1_PIPECTL 0xFFC1A1C4 /* PVP0 Pipe Control */ +#define PVP0_IPF0_CTL 0xFFC1A188 /* PVP0 Control */ +#define PVP0_IPF1_CTL 0xFFC1A1C8 /* PVP0 Control */ +#define PVP0_IPF0_TAG 0xFFC1A18C /* PVP0 TAG Value */ +#define PVP0_IPF1_TAG 0xFFC1A1CC /* PVP0 TAG Value */ +#define PVP0_IPF0_FCNT 0xFFC1A190 /* PVP0 Frame Count */ +#define PVP0_IPF1_FCNT 0xFFC1A1D0 /* PVP0 Frame Count */ +#define PVP0_IPF0_HCNT 0xFFC1A194 /* PVP0 Horizontal Count */ +#define PVP0_IPF1_HCNT 0xFFC1A1D4 /* PVP0 Horizontal Count */ +#define PVP0_IPF0_VCNT 0xFFC1A198 /* PVP0 Vertical Count */ +#define PVP0_IPF1_VCNT 0xFFC1A1D8 /* PVP0 Vertical Count */ +#define PVP0_IPF0_HPOS 0xFFC1A19C /* PVP0 Horizontal Position */ +#define PVP0_IPF0_VPOS 0xFFC1A1A0 /* PVP0 Vertical Position */ +#define PVP0_IPF0_TAG_STAT 0xFFC1A1A4 /* PVP0 TAG Status */ +#define PVP0_IPF1_TAG_STAT 0xFFC1A1E4 /* PVP0 TAG Status */ +#define PVP0_IPF1_CFG 0xFFC1A1C0 /* PVP0 Configuration */ +#define PVP0_CNV0_CFG 0xFFC1A200 /* PVP0 Configuration */ +#define PVP0_CNV1_CFG 0xFFC1A280 /* PVP0 Configuration */ +#define PVP0_CNV2_CFG 0xFFC1A300 /* PVP0 Configuration */ +#define PVP0_CNV3_CFG 0xFFC1A380 /* PVP0 Configuration */ +#define PVP0_CNV0_CTL 0xFFC1A204 /* PVP0 Control */ +#define PVP0_CNV1_CTL 0xFFC1A284 /* PVP0 Control */ +#define PVP0_CNV2_CTL 0xFFC1A304 /* PVP0 Control */ +#define PVP0_CNV3_CTL 0xFFC1A384 /* PVP0 Control */ +#define PVP0_CNV0_C00C01 0xFFC1A208 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV1_C00C01 0xFFC1A288 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV2_C00C01 0xFFC1A308 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV3_C00C01 0xFFC1A388 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV0_C02C03 0xFFC1A20C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV1_C02C03 0xFFC1A28C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV2_C02C03 0xFFC1A30C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV3_C02C03 0xFFC1A38C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV0_C04 0xFFC1A210 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV1_C04 0xFFC1A290 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV2_C04 0xFFC1A310 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV3_C04 0xFFC1A390 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV0_C10C11 0xFFC1A214 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV1_C10C11 0xFFC1A294 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV2_C10C11 0xFFC1A314 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV3_C10C11 0xFFC1A394 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV0_C12C13 0xFFC1A218 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV1_C12C13 0xFFC1A298 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV2_C12C13 0xFFC1A318 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV3_C12C13 0xFFC1A398 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV0_C14 0xFFC1A21C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV1_C14 0xFFC1A29C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV2_C14 0xFFC1A31C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV3_C14 0xFFC1A39C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV0_C20C21 0xFFC1A220 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV1_C20C21 0xFFC1A2A0 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV2_C20C21 0xFFC1A320 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV3_C20C21 0xFFC1A3A0 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV0_C22C23 0xFFC1A224 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV1_C22C23 0xFFC1A2A4 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV2_C22C23 0xFFC1A324 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV3_C22C23 0xFFC1A3A4 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV0_C24 0xFFC1A228 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV1_C24 0xFFC1A2A8 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV2_C24 0xFFC1A328 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV3_C24 0xFFC1A3A8 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV0_C30C31 0xFFC1A22C /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV1_C30C31 0xFFC1A2AC /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV2_C30C31 0xFFC1A32C /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV3_C30C31 0xFFC1A3AC /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV0_C32C33 0xFFC1A230 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV1_C32C33 0xFFC1A2B0 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV2_C32C33 0xFFC1A330 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV3_C32C33 0xFFC1A3B0 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV0_C34 0xFFC1A234 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV1_C34 0xFFC1A2B4 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV2_C34 0xFFC1A334 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV3_C34 0xFFC1A3B4 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV0_C40C41 0xFFC1A238 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV1_C40C41 0xFFC1A2B8 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV2_C40C41 0xFFC1A338 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV3_C40C41 0xFFC1A3B8 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV0_C42C43 0xFFC1A23C /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV1_C42C43 0xFFC1A2BC /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV2_C42C43 0xFFC1A33C /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV3_C42C43 0xFFC1A3BC /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV0_C44 0xFFC1A240 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV1_C44 0xFFC1A2C0 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV2_C44 0xFFC1A340 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV3_C44 0xFFC1A3C0 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV0_SCALE 0xFFC1A244 /* PVP0 Scaling factor */ +#define PVP0_CNV1_SCALE 0xFFC1A2C4 /* PVP0 Scaling factor */ +#define PVP0_CNV2_SCALE 0xFFC1A344 /* PVP0 Scaling factor */ +#define PVP0_CNV3_SCALE 0xFFC1A3C4 /* PVP0 Scaling factor */ +#define PVP0_THC0_CFG 0xFFC1A400 /* PVP0 Configuration */ +#define PVP0_THC1_CFG 0xFFC1A500 /* PVP0 Configuration */ +#define PVP0_THC0_CTL 0xFFC1A404 /* PVP0 Control */ +#define PVP0_THC1_CTL 0xFFC1A504 /* PVP0 Control */ +#define PVP0_THC0_HFCNT 0xFFC1A408 /* PVP0 Number of frames */ +#define PVP0_THC1_HFCNT 0xFFC1A508 /* PVP0 Number of frames */ +#define PVP0_THC0_RMAXREP 0xFFC1A40C /* PVP0 Maximum number of RLE reports */ +#define PVP0_THC1_RMAXREP 0xFFC1A50C /* PVP0 Maximum number of RLE reports */ +#define PVP0_THC0_CMINVAL 0xFFC1A410 /* PVP0 Min clip value */ +#define PVP0_THC1_CMINVAL 0xFFC1A510 /* PVP0 Min clip value */ +#define PVP0_THC0_CMINTH 0xFFC1A414 /* PVP0 Clip Min Threshold */ +#define PVP0_THC1_CMINTH 0xFFC1A514 /* PVP0 Clip Min Threshold */ +#define PVP0_THC0_CMAXTH 0xFFC1A418 /* PVP0 Clip Max Threshold */ +#define PVP0_THC1_CMAXTH 0xFFC1A518 /* PVP0 Clip Max Threshold */ +#define PVP0_THC0_CMAXVAL 0xFFC1A41C /* PVP0 Max clip value */ +#define PVP0_THC1_CMAXVAL 0xFFC1A51C /* PVP0 Max clip value */ +#define PVP0_THC0_TH0 0xFFC1A420 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH0 0xFFC1A520 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH1 0xFFC1A424 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH1 0xFFC1A524 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH2 0xFFC1A428 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH2 0xFFC1A528 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH3 0xFFC1A42C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH3 0xFFC1A52C /* PVP0 Threshold Value */ +#define PVP0_THC0_TH4 0xFFC1A430 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH4 0xFFC1A530 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH5 0xFFC1A434 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH5 0xFFC1A534 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH6 0xFFC1A438 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH6 0xFFC1A538 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH7 0xFFC1A43C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH7 0xFFC1A53C /* PVP0 Threshold Value */ +#define PVP0_THC0_TH8 0xFFC1A440 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH8 0xFFC1A540 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH9 0xFFC1A444 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH9 0xFFC1A544 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH10 0xFFC1A448 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH10 0xFFC1A548 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH11 0xFFC1A44C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH11 0xFFC1A54C /* PVP0 Threshold Value */ +#define PVP0_THC0_TH12 0xFFC1A450 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH12 0xFFC1A550 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH13 0xFFC1A454 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH13 0xFFC1A554 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH14 0xFFC1A458 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH14 0xFFC1A558 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH15 0xFFC1A45C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH15 0xFFC1A55C /* PVP0 Threshold Value */ +#define PVP0_THC0_HHPOS 0xFFC1A460 /* PVP0 Window start X-coordinate */ +#define PVP0_THC1_HHPOS 0xFFC1A560 /* PVP0 Window start X-coordinate */ +#define PVP0_THC0_HVPOS 0xFFC1A464 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC1_HVPOS 0xFFC1A564 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC0_HHCNT 0xFFC1A468 /* PVP0 Window width in X dimension */ +#define PVP0_THC1_HHCNT 0xFFC1A568 /* PVP0 Window width in X dimension */ +#define PVP0_THC0_HVCNT 0xFFC1A46C /* PVP0 Window width in Y dimension */ +#define PVP0_THC1_HVCNT 0xFFC1A56C /* PVP0 Window width in Y dimension */ +#define PVP0_THC0_RHPOS 0xFFC1A470 /* PVP0 Window start X-coordinate */ +#define PVP0_THC1_RHPOS 0xFFC1A570 /* PVP0 Window start X-coordinate */ +#define PVP0_THC0_RVPOS 0xFFC1A474 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC1_RVPOS 0xFFC1A574 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC0_RHCNT 0xFFC1A478 /* PVP0 Window width in X dimension */ +#define PVP0_THC1_RHCNT 0xFFC1A578 /* PVP0 Window width in X dimension */ +#define PVP0_THC0_RVCNT 0xFFC1A47C /* PVP0 Window width in Y dimension */ +#define PVP0_THC1_RVCNT 0xFFC1A57C /* PVP0 Window width in Y dimension */ +#define PVP0_THC0_HFCNT_STAT 0xFFC1A480 /* PVP0 Current Frame counter */ +#define PVP0_THC1_HFCNT_STAT 0xFFC1A580 /* PVP0 Current Frame counter */ +#define PVP0_THC0_HCNT0_STAT 0xFFC1A484 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT0_STAT 0xFFC1A584 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT1_STAT 0xFFC1A488 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT1_STAT 0xFFC1A588 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT2_STAT 0xFFC1A48C /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT2_STAT 0xFFC1A58C /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT3_STAT 0xFFC1A490 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT3_STAT 0xFFC1A590 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT4_STAT 0xFFC1A494 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT4_STAT 0xFFC1A594 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT5_STAT 0xFFC1A498 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT5_STAT 0xFFC1A598 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT6_STAT 0xFFC1A49C /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT6_STAT 0xFFC1A59C /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT7_STAT 0xFFC1A4A0 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT7_STAT 0xFFC1A5A0 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT8_STAT 0xFFC1A4A4 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT8_STAT 0xFFC1A5A4 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT9_STAT 0xFFC1A4A8 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT9_STAT 0xFFC1A5A8 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT10_STAT 0xFFC1A4AC /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT10_STAT 0xFFC1A5AC /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT11_STAT 0xFFC1A4B0 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT11_STAT 0xFFC1A5B0 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT12_STAT 0xFFC1A4B4 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT12_STAT 0xFFC1A5B4 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT13_STAT 0xFFC1A4B8 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT13_STAT 0xFFC1A5B8 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT14_STAT 0xFFC1A4BC /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT14_STAT 0xFFC1A5BC /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT15_STAT 0xFFC1A4C0 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT15_STAT 0xFFC1A5C0 /* PVP0 Histogram counter value */ +#define PVP0_THC0_RREP_STAT 0xFFC1A4C4 /* PVP0 Number of RLE Reports */ +#define PVP0_THC1_RREP_STAT 0xFFC1A5C4 /* PVP0 Number of RLE Reports */ +#define PVP0_PMA_CFG 0xFFC1A600 /* PVP0 PMA Configuration Register */ +#define PWM0_CTL 0xFFC1B000 /* PWM0 PWM Control Register */ +#define PWM0_CHANCFG 0xFFC1B004 /* PWM0 PWM Channel Config Register */ +#define PWM0_TRIPCFG 0xFFC1B008 /* PWM0 PWM Trip Config Register */ +#define PWM0_STAT 0xFFC1B00C /* PWM0 PWM Chop Config Register */ +#define PWM0_IMSK 0xFFC1B010 /* PWM0 PWM Interrupt Mask Register */ +#define PWM0_ILAT 0xFFC1B014 /* PWM0 PWM Interrupt Latch Register */ +#define PWM0_CHOPCFG 0xFFC1B018 /* PWM0 PWM Chop Configuration Register */ +#define PWM0_DT 0xFFC1B01C /* PWM0 PWM Dead Time Register */ +#define PWM0_SYNC_WID 0xFFC1B020 /* PWM0 Sync Pulse Width Register */ +#define PWM0_TM0 0xFFC1B024 /* PWM0 Timer0 Period register */ +#define PWM0_TM1 0xFFC1B028 /* PWM0 Timer1 Period register */ +#define PWM0_TM2 0xFFC1B02C /* PWM0 Timer2 Period register */ +#define PWM0_TM3 0xFFC1B030 /* PWM0 Time3 Period register */ +#define PWM0_TM4 0xFFC1B034 /* PWM0 Timer4 Period register */ +#define PWM0_DLYA 0xFFC1B038 /* PWM0 Channel-A Delay register */ +#define PWM0_DLYB 0xFFC1B03C /* PWM0 Channel-B Delay register */ +#define PWM0_DLYC 0xFFC1B040 /* PWM0 Channel-C Delay register */ +#define PWM0_DLYD 0xFFC1B044 /* PWM0 Channel-D Delay register */ +#define PWM0_ACTL 0xFFC1B048 /* PWM0 Channel-A control register */ +#define PWM0_AH0 0xFFC1B04C /* PWM0 Ch-AH Duty-0 register */ +#define PWM0_AH1 0xFFC1B050 /* PWM0 Ch-AH Duty-1 register */ +#define PWM0_AH0_HP 0xFFC1B054 /* PWM0 Ch-AH High precision Duty-0 register */ +#define PWM0_AH1_HP 0xFFC1B058 /* PWM0 Ch-AH High precision Duty-1 register */ +#define PWM0_AL0 0xFFC1B05C /* PWM0 Ch-AL Duty-0 register */ +#define PWM0_AL1 0xFFC1B060 /* PWM0 Ch-AL Duty-1 register */ +#define PWM0_BCTL 0xFFC1B064 /* PWM0 Channel-B control register */ +#define PWM0_BH0 0xFFC1B068 /* PWM0 Ch-BH Duty-0 register */ +#define PWM0_BH1 0xFFC1B06C /* PWM0 Ch-BH Duty-1 register */ +#define PWM0_BH0_HP 0xFFC1B070 /* PWM0 Ch-BH High precision Duty-0 register */ +#define PWM0_BH1_HP 0xFFC1B074 /* PWM0 Ch-BH High precision Duty-1 register */ +#define PWM0_BL0 0xFFC1B078 /* PWM0 Ch-BL Duty-0 register */ +#define PWM0_BL1 0xFFC1B07C /* PWM0 Ch-BL Duty-1 register */ +#define PWM0_CCTL 0xFFC1B080 /* PWM0 Channel-C control register */ +#define PWM0_CH0 0xFFC1B084 /* PWM0 Ch-CH Duty-0 register */ +#define PWM0_CH1 0xFFC1B088 /* PWM0 Ch-CH Duty-1 register */ +#define PWM0_CH0_HP 0xFFC1B08C /* PWM0 Ch-CH High precision Duty-0 register */ +#define PWM0_CH1_HP 0xFFC1B090 /* PWM0 Ch-CH High precision Duty-1 register */ +#define PWM0_CL0 0xFFC1B094 /* PWM0 Ch-CL Duty-0 register */ +#define PWM0_CL1 0xFFC1B098 /* PWM0 Ch-CL Duty-1 register */ +#define PWM0_DCTL 0xFFC1B09C /* PWM0 Channel-D control register */ +#define PWM0_DH0 0xFFC1B0A0 /* PWM0 Ch-DH Duty-0 register */ +#define PWM0_DH1 0xFFC1B0A4 /* PWM0 Ch-DH Duty-1 register */ +#define PWM0_DH0_HP 0xFFC1B0A8 /* PWM0 Ch-DH High precision Duty-0 register */ +#define PWM0_DH1_HP 0xFFC1B0AC /* PWM0 Ch-DH High precision Duty-1 register */ +#define PWM0_DL0 0xFFC1B0B0 /* PWM0 Ch-DL Duty-0 register */ +#define PWM0_DL1 0xFFC1B0B4 /* PWM0 Ch-DL Duty-1 register */ +#define PWM0_REVID 0xFFC1B0FC /* PWM0 PWM Revision ID Register */ +#define PWM1_CTL 0xFFC1B400 /* PWM1 PWM Control Register */ +#define PWM1_CHANCFG 0xFFC1B404 /* PWM1 PWM Channel Config Register */ +#define PWM1_TRIPCFG 0xFFC1B408 /* PWM1 PWM Trip Config Register */ +#define PWM1_STAT 0xFFC1B40C /* PWM1 PWM Chop Config Register */ +#define PWM1_IMSK 0xFFC1B410 /* PWM1 PWM Interrupt Mask Register */ +#define PWM1_ILAT 0xFFC1B414 /* PWM1 PWM Interrupt Latch Register */ +#define PWM1_CHOPCFG 0xFFC1B418 /* PWM1 PWM Chop Configuration Register */ +#define PWM1_DT 0xFFC1B41C /* PWM1 PWM Dead Time Register */ +#define PWM1_SYNC_WID 0xFFC1B420 /* PWM1 Sync Pulse Width Register */ +#define PWM1_TM0 0xFFC1B424 /* PWM1 Timer0 Period register */ +#define PWM1_TM1 0xFFC1B428 /* PWM1 Timer1 Period register */ +#define PWM1_TM2 0xFFC1B42C /* PWM1 Timer2 Period register */ +#define PWM1_TM3 0xFFC1B430 /* PWM1 Time3 Period register */ +#define PWM1_TM4 0xFFC1B434 /* PWM1 Timer4 Period register */ +#define PWM1_DLYA 0xFFC1B438 /* PWM1 Channel-A Delay register */ +#define PWM1_DLYB 0xFFC1B43C /* PWM1 Channel-B Delay register */ +#define PWM1_DLYC 0xFFC1B440 /* PWM1 Channel-C Delay register */ +#define PWM1_DLYD 0xFFC1B444 /* PWM1 Channel-D Delay register */ +#define PWM1_ACTL 0xFFC1B448 /* PWM1 Channel-A control register */ +#define PWM1_AH0 0xFFC1B44C /* PWM1 Ch-AH Duty-0 register */ +#define PWM1_AH1 0xFFC1B450 /* PWM1 Ch-AH Duty-1 register */ +#define PWM1_AH0_HP 0xFFC1B454 /* PWM1 Ch-AH High precision Duty-0 register */ +#define PWM1_AH1_HP 0xFFC1B458 /* PWM1 Ch-AH High precision Duty-1 register */ +#define PWM1_AL0 0xFFC1B45C /* PWM1 Ch-AL Duty-0 register */ +#define PWM1_AL1 0xFFC1B460 /* PWM1 Ch-AL Duty-1 register */ +#define PWM1_BCTL 0xFFC1B464 /* PWM1 Channel-B control register */ +#define PWM1_BH0 0xFFC1B468 /* PWM1 Ch-BH Duty-0 register */ +#define PWM1_BH1 0xFFC1B46C /* PWM1 Ch-BH Duty-1 register */ +#define PWM1_BH0_HP 0xFFC1B470 /* PWM1 Ch-BH High precision Duty-0 register */ +#define PWM1_BH1_HP 0xFFC1B474 /* PWM1 Ch-BH High precision Duty-1 register */ +#define PWM1_BL0 0xFFC1B478 /* PWM1 Ch-BL Duty-0 register */ +#define PWM1_BL1 0xFFC1B47C /* PWM1 Ch-BL Duty-1 register */ +#define PWM1_CCTL 0xFFC1B480 /* PWM1 Channel-C control register */ +#define PWM1_CH0 0xFFC1B484 /* PWM1 Ch-CH Duty-0 register */ +#define PWM1_CH1 0xFFC1B488 /* PWM1 Ch-CH Duty-1 register */ +#define PWM1_CH0_HP 0xFFC1B48C /* PWM1 Ch-CH High precision Duty-0 register */ +#define PWM1_CH1_HP 0xFFC1B490 /* PWM1 Ch-CH High precision Duty-1 register */ +#define PWM1_CL0 0xFFC1B494 /* PWM1 Ch-CL Duty-0 register */ +#define PWM1_CL1 0xFFC1B498 /* PWM1 Ch-CL Duty-1 register */ +#define PWM1_DCTL 0xFFC1B49C /* PWM1 Channel-D control register */ +#define PWM1_DH0 0xFFC1B4A0 /* PWM1 Ch-DH Duty-0 register */ +#define PWM1_DH1 0xFFC1B4A4 /* PWM1 Ch-DH Duty-1 register */ +#define PWM1_DH0_HP 0xFFC1B4A8 /* PWM1 Ch-DH High precision Duty-0 register */ +#define PWM1_DH1_HP 0xFFC1B4AC /* PWM1 Ch-DH High precision Duty-1 register */ +#define PWM1_DL0 0xFFC1B4B0 /* PWM1 Ch-DL Duty-0 register */ +#define PWM1_DL1 0xFFC1B4B4 /* PWM1 Ch-DL Duty-1 register */ +#define PWM1_REVID 0xFFC1B4FC /* PWM1 PWM Revision ID Register */ +#define VID0_CONN 0xFFC1D000 /* VID0 Video Subsystem Connect Register */ +#define SWU0_GCTL 0xFFC1E000 /* SWU0 Global Control Register */ +#define SWU0_GSTAT 0xFFC1E004 /* SWU0 Global Status Register */ +#define SWU0_CTL0 0xFFC1E010 /* SWU0 Control Register n */ +#define SWU0_CTL1 0xFFC1E030 /* SWU0 Control Register n */ +#define SWU0_CTL2 0xFFC1E050 /* SWU0 Control Register n */ +#define SWU0_CTL3 0xFFC1E070 /* SWU0 Control Register n */ +#define SWU0_LA0 0xFFC1E014 /* SWU0 Lower Address Register n */ +#define SWU0_LA1 0xFFC1E034 /* SWU0 Lower Address Register n */ +#define SWU0_LA2 0xFFC1E054 /* SWU0 Lower Address Register n */ +#define SWU0_LA3 0xFFC1E074 /* SWU0 Lower Address Register n */ +#define SWU0_UA0 0xFFC1E018 /* SWU0 Upper Address Register n */ +#define SWU0_UA1 0xFFC1E038 /* SWU0 Upper Address Register n */ +#define SWU0_UA2 0xFFC1E058 /* SWU0 Upper Address Register n */ +#define SWU0_UA3 0xFFC1E078 /* SWU0 Upper Address Register n */ +#define SWU0_ID0 0xFFC1E01C /* SWU0 ID Register n */ +#define SWU0_ID1 0xFFC1E03C /* SWU0 ID Register n */ +#define SWU0_ID2 0xFFC1E05C /* SWU0 ID Register n */ +#define SWU0_ID3 0xFFC1E07C /* SWU0 ID Register n */ +#define SWU0_CNT0 0xFFC1E020 /* SWU0 Count Register n */ +#define SWU0_CNT1 0xFFC1E040 /* SWU0 Count Register n */ +#define SWU0_CNT2 0xFFC1E060 /* SWU0 Count Register n */ +#define SWU0_CNT3 0xFFC1E080 /* SWU0 Count Register n */ +#define SWU0_TARG0 0xFFC1E024 /* SWU0 Target Register n */ +#define SWU0_TARG1 0xFFC1E044 /* SWU0 Target Register n */ +#define SWU0_TARG2 0xFFC1E064 /* SWU0 Target Register n */ +#define SWU0_TARG3 0xFFC1E084 /* SWU0 Target Register n */ +#define SWU0_HIST0 0xFFC1E028 /* SWU0 Bandwidth History Register n */ +#define SWU0_HIST1 0xFFC1E048 /* SWU0 Bandwidth History Register n */ +#define SWU0_HIST2 0xFFC1E068 /* SWU0 Bandwidth History Register n */ +#define SWU0_HIST3 0xFFC1E088 /* SWU0 Bandwidth History Register n */ +#define SWU0_CUR0 0xFFC1E02C /* SWU0 Current Register n */ +#define SWU0_CUR1 0xFFC1E04C /* SWU0 Current Register n */ +#define SWU0_CUR2 0xFFC1E06C /* SWU0 Current Register n */ +#define SWU0_CUR3 0xFFC1E08C /* SWU0 Current Register n */ +#define SWU1_GCTL 0xFFCAB000 /* SWU1 Global Control Register */ +#define SWU1_GSTAT 0xFFCAB004 /* SWU1 Global Status Register */ +#define SWU1_CTL0 0xFFCAB010 /* SWU1 Control Register n */ +#define SWU1_CTL1 0xFFCAB030 /* SWU1 Control Register n */ +#define SWU1_CTL2 0xFFCAB050 /* SWU1 Control Register n */ +#define SWU1_CTL3 0xFFCAB070 /* SWU1 Control Register n */ +#define SWU1_LA0 0xFFCAB014 /* SWU1 Lower Address Register n */ +#define SWU1_LA1 0xFFCAB034 /* SWU1 Lower Address Register n */ +#define SWU1_LA2 0xFFCAB054 /* SWU1 Lower Address Register n */ +#define SWU1_LA3 0xFFCAB074 /* SWU1 Lower Address Register n */ +#define SWU1_UA0 0xFFCAB018 /* SWU1 Upper Address Register n */ +#define SWU1_UA1 0xFFCAB038 /* SWU1 Upper Address Register n */ +#define SWU1_UA2 0xFFCAB058 /* SWU1 Upper Address Register n */ +#define SWU1_UA3 0xFFCAB078 /* SWU1 Upper Address Register n */ +#define SWU1_ID0 0xFFCAB01C /* SWU1 ID Register n */ +#define SWU1_ID1 0xFFCAB03C /* SWU1 ID Register n */ +#define SWU1_ID2 0xFFCAB05C /* SWU1 ID Register n */ +#define SWU1_ID3 0xFFCAB07C /* SWU1 ID Register n */ +#define SWU1_CNT0 0xFFCAB020 /* SWU1 Count Register n */ +#define SWU1_CNT1 0xFFCAB040 /* SWU1 Count Register n */ +#define SWU1_CNT2 0xFFCAB060 /* SWU1 Count Register n */ +#define SWU1_CNT3 0xFFCAB080 /* SWU1 Count Register n */ +#define SWU1_TARG0 0xFFCAB024 /* SWU1 Target Register n */ +#define SWU1_TARG1 0xFFCAB044 /* SWU1 Target Register n */ +#define SWU1_TARG2 0xFFCAB064 /* SWU1 Target Register n */ +#define SWU1_TARG3 0xFFCAB084 /* SWU1 Target Register n */ +#define SWU1_HIST0 0xFFCAB028 /* SWU1 Bandwidth History Register n */ +#define SWU1_HIST1 0xFFCAB048 /* SWU1 Bandwidth History Register n */ +#define SWU1_HIST2 0xFFCAB068 /* SWU1 Bandwidth History Register n */ +#define SWU1_HIST3 0xFFCAB088 /* SWU1 Bandwidth History Register n */ +#define SWU1_CUR0 0xFFCAB02C /* SWU1 Current Register n */ +#define SWU1_CUR1 0xFFCAB04C /* SWU1 Current Register n */ +#define SWU1_CUR2 0xFFCAB06C /* SWU1 Current Register n */ +#define SWU1_CUR3 0xFFCAB08C /* SWU1 Current Register n */ +#define SWU2_GCTL 0xFFCAC000 /* SWU2 Global Control Register */ +#define SWU2_GSTAT 0xFFCAC004 /* SWU2 Global Status Register */ +#define SWU2_CTL0 0xFFCAC010 /* SWU2 Control Register n */ +#define SWU2_CTL1 0xFFCAC030 /* SWU2 Control Register n */ +#define SWU2_CTL2 0xFFCAC050 /* SWU2 Control Register n */ +#define SWU2_CTL3 0xFFCAC070 /* SWU2 Control Register n */ +#define SWU2_LA0 0xFFCAC014 /* SWU2 Lower Address Register n */ +#define SWU2_LA1 0xFFCAC034 /* SWU2 Lower Address Register n */ +#define SWU2_LA2 0xFFCAC054 /* SWU2 Lower Address Register n */ +#define SWU2_LA3 0xFFCAC074 /* SWU2 Lower Address Register n */ +#define SWU2_UA0 0xFFCAC018 /* SWU2 Upper Address Register n */ +#define SWU2_UA1 0xFFCAC038 /* SWU2 Upper Address Register n */ +#define SWU2_UA2 0xFFCAC058 /* SWU2 Upper Address Register n */ +#define SWU2_UA3 0xFFCAC078 /* SWU2 Upper Address Register n */ +#define SWU2_ID0 0xFFCAC01C /* SWU2 ID Register n */ +#define SWU2_ID1 0xFFCAC03C /* SWU2 ID Register n */ +#define SWU2_ID2 0xFFCAC05C /* SWU2 ID Register n */ +#define SWU2_ID3 0xFFCAC07C /* SWU2 ID Register n */ +#define SWU2_CNT0 0xFFCAC020 /* SWU2 Count Register n */ +#define SWU2_CNT1 0xFFCAC040 /* SWU2 Count Register n */ +#define SWU2_CNT2 0xFFCAC060 /* SWU2 Count Register n */ +#define SWU2_CNT3 0xFFCAC080 /* SWU2 Count Register n */ +#define SWU2_TARG0 0xFFCAC024 /* SWU2 Target Register n */ +#define SWU2_TARG1 0xFFCAC044 /* SWU2 Target Register n */ +#define SWU2_TARG2 0xFFCAC064 /* SWU2 Target Register n */ +#define SWU2_TARG3 0xFFCAC084 /* SWU2 Target Register n */ +#define SWU2_HIST0 0xFFCAC028 /* SWU2 Bandwidth History Register n */ +#define SWU2_HIST1 0xFFCAC048 /* SWU2 Bandwidth History Register n */ +#define SWU2_HIST2 0xFFCAC068 /* SWU2 Bandwidth History Register n */ +#define SWU2_HIST3 0xFFCAC088 /* SWU2 Bandwidth History Register n */ +#define SWU2_CUR0 0xFFCAC02C /* SWU2 Current Register n */ +#define SWU2_CUR1 0xFFCAC04C /* SWU2 Current Register n */ +#define SWU2_CUR2 0xFFCAC06C /* SWU2 Current Register n */ +#define SWU2_CUR3 0xFFCAC08C /* SWU2 Current Register n */ +#define SWU3_GCTL 0xFFCAD000 /* SWU3 Global Control Register */ +#define SWU3_GSTAT 0xFFCAD004 /* SWU3 Global Status Register */ +#define SWU3_CTL0 0xFFCAD010 /* SWU3 Control Register n */ +#define SWU3_CTL1 0xFFCAD030 /* SWU3 Control Register n */ +#define SWU3_CTL2 0xFFCAD050 /* SWU3 Control Register n */ +#define SWU3_CTL3 0xFFCAD070 /* SWU3 Control Register n */ +#define SWU3_LA0 0xFFCAD014 /* SWU3 Lower Address Register n */ +#define SWU3_LA1 0xFFCAD034 /* SWU3 Lower Address Register n */ +#define SWU3_LA2 0xFFCAD054 /* SWU3 Lower Address Register n */ +#define SWU3_LA3 0xFFCAD074 /* SWU3 Lower Address Register n */ +#define SWU3_UA0 0xFFCAD018 /* SWU3 Upper Address Register n */ +#define SWU3_UA1 0xFFCAD038 /* SWU3 Upper Address Register n */ +#define SWU3_UA2 0xFFCAD058 /* SWU3 Upper Address Register n */ +#define SWU3_UA3 0xFFCAD078 /* SWU3 Upper Address Register n */ +#define SWU3_ID0 0xFFCAD01C /* SWU3 ID Register n */ +#define SWU3_ID1 0xFFCAD03C /* SWU3 ID Register n */ +#define SWU3_ID2 0xFFCAD05C /* SWU3 ID Register n */ +#define SWU3_ID3 0xFFCAD07C /* SWU3 ID Register n */ +#define SWU3_CNT0 0xFFCAD020 /* SWU3 Count Register n */ +#define SWU3_CNT1 0xFFCAD040 /* SWU3 Count Register n */ +#define SWU3_CNT2 0xFFCAD060 /* SWU3 Count Register n */ +#define SWU3_CNT3 0xFFCAD080 /* SWU3 Count Register n */ +#define SWU3_TARG0 0xFFCAD024 /* SWU3 Target Register n */ +#define SWU3_TARG1 0xFFCAD044 /* SWU3 Target Register n */ +#define SWU3_TARG2 0xFFCAD064 /* SWU3 Target Register n */ +#define SWU3_TARG3 0xFFCAD084 /* SWU3 Target Register n */ +#define SWU3_HIST0 0xFFCAD028 /* SWU3 Bandwidth History Register n */ +#define SWU3_HIST1 0xFFCAD048 /* SWU3 Bandwidth History Register n */ +#define SWU3_HIST2 0xFFCAD068 /* SWU3 Bandwidth History Register n */ +#define SWU3_HIST3 0xFFCAD088 /* SWU3 Bandwidth History Register n */ +#define SWU3_CUR0 0xFFCAD02C /* SWU3 Current Register n */ +#define SWU3_CUR1 0xFFCAD04C /* SWU3 Current Register n */ +#define SWU3_CUR2 0xFFCAD06C /* SWU3 Current Register n */ +#define SWU3_CUR3 0xFFCAD08C /* SWU3 Current Register n */ +#define SWU4_GCTL 0xFFCAE000 /* SWU4 Global Control Register */ +#define SWU4_GSTAT 0xFFCAE004 /* SWU4 Global Status Register */ +#define SWU4_CTL0 0xFFCAE010 /* SWU4 Control Register n */ +#define SWU4_CTL1 0xFFCAE030 /* SWU4 Control Register n */ +#define SWU4_CTL2 0xFFCAE050 /* SWU4 Control Register n */ +#define SWU4_CTL3 0xFFCAE070 /* SWU4 Control Register n */ +#define SWU4_LA0 0xFFCAE014 /* SWU4 Lower Address Register n */ +#define SWU4_LA1 0xFFCAE034 /* SWU4 Lower Address Register n */ +#define SWU4_LA2 0xFFCAE054 /* SWU4 Lower Address Register n */ +#define SWU4_LA3 0xFFCAE074 /* SWU4 Lower Address Register n */ +#define SWU4_UA0 0xFFCAE018 /* SWU4 Upper Address Register n */ +#define SWU4_UA1 0xFFCAE038 /* SWU4 Upper Address Register n */ +#define SWU4_UA2 0xFFCAE058 /* SWU4 Upper Address Register n */ +#define SWU4_UA3 0xFFCAE078 /* SWU4 Upper Address Register n */ +#define SWU4_ID0 0xFFCAE01C /* SWU4 ID Register n */ +#define SWU4_ID1 0xFFCAE03C /* SWU4 ID Register n */ +#define SWU4_ID2 0xFFCAE05C /* SWU4 ID Register n */ +#define SWU4_ID3 0xFFCAE07C /* SWU4 ID Register n */ +#define SWU4_CNT0 0xFFCAE020 /* SWU4 Count Register n */ +#define SWU4_CNT1 0xFFCAE040 /* SWU4 Count Register n */ +#define SWU4_CNT2 0xFFCAE060 /* SWU4 Count Register n */ +#define SWU4_CNT3 0xFFCAE080 /* SWU4 Count Register n */ +#define SWU4_TARG0 0xFFCAE024 /* SWU4 Target Register n */ +#define SWU4_TARG1 0xFFCAE044 /* SWU4 Target Register n */ +#define SWU4_TARG2 0xFFCAE064 /* SWU4 Target Register n */ +#define SWU4_TARG3 0xFFCAE084 /* SWU4 Target Register n */ +#define SWU4_HIST0 0xFFCAE028 /* SWU4 Bandwidth History Register n */ +#define SWU4_HIST1 0xFFCAE048 /* SWU4 Bandwidth History Register n */ +#define SWU4_HIST2 0xFFCAE068 /* SWU4 Bandwidth History Register n */ +#define SWU4_HIST3 0xFFCAE088 /* SWU4 Bandwidth History Register n */ +#define SWU4_CUR0 0xFFCAE02C /* SWU4 Current Register n */ +#define SWU4_CUR1 0xFFCAE04C /* SWU4 Current Register n */ +#define SWU4_CUR2 0xFFCAE06C /* SWU4 Current Register n */ +#define SWU4_CUR3 0xFFCAE08C /* SWU4 Current Register n */ +#define SWU5_GCTL 0xFFCAF000 /* SWU5 Global Control Register */ +#define SWU5_GSTAT 0xFFCAF004 /* SWU5 Global Status Register */ +#define SWU5_CTL0 0xFFCAF010 /* SWU5 Control Register n */ +#define SWU5_CTL1 0xFFCAF030 /* SWU5 Control Register n */ +#define SWU5_CTL2 0xFFCAF050 /* SWU5 Control Register n */ +#define SWU5_CTL3 0xFFCAF070 /* SWU5 Control Register n */ +#define SWU5_LA0 0xFFCAF014 /* SWU5 Lower Address Register n */ +#define SWU5_LA1 0xFFCAF034 /* SWU5 Lower Address Register n */ +#define SWU5_LA2 0xFFCAF054 /* SWU5 Lower Address Register n */ +#define SWU5_LA3 0xFFCAF074 /* SWU5 Lower Address Register n */ +#define SWU5_UA0 0xFFCAF018 /* SWU5 Upper Address Register n */ +#define SWU5_UA1 0xFFCAF038 /* SWU5 Upper Address Register n */ +#define SWU5_UA2 0xFFCAF058 /* SWU5 Upper Address Register n */ +#define SWU5_UA3 0xFFCAF078 /* SWU5 Upper Address Register n */ +#define SWU5_ID0 0xFFCAF01C /* SWU5 ID Register n */ +#define SWU5_ID1 0xFFCAF03C /* SWU5 ID Register n */ +#define SWU5_ID2 0xFFCAF05C /* SWU5 ID Register n */ +#define SWU5_ID3 0xFFCAF07C /* SWU5 ID Register n */ +#define SWU5_CNT0 0xFFCAF020 /* SWU5 Count Register n */ +#define SWU5_CNT1 0xFFCAF040 /* SWU5 Count Register n */ +#define SWU5_CNT2 0xFFCAF060 /* SWU5 Count Register n */ +#define SWU5_CNT3 0xFFCAF080 /* SWU5 Count Register n */ +#define SWU5_TARG0 0xFFCAF024 /* SWU5 Target Register n */ +#define SWU5_TARG1 0xFFCAF044 /* SWU5 Target Register n */ +#define SWU5_TARG2 0xFFCAF064 /* SWU5 Target Register n */ +#define SWU5_TARG3 0xFFCAF084 /* SWU5 Target Register n */ +#define SWU5_HIST0 0xFFCAF028 /* SWU5 Bandwidth History Register n */ +#define SWU5_HIST1 0xFFCAF048 /* SWU5 Bandwidth History Register n */ +#define SWU5_HIST2 0xFFCAF068 /* SWU5 Bandwidth History Register n */ +#define SWU5_HIST3 0xFFCAF088 /* SWU5 Bandwidth History Register n */ +#define SWU5_CUR0 0xFFCAF02C /* SWU5 Current Register n */ +#define SWU5_CUR1 0xFFCAF04C /* SWU5 Current Register n */ +#define SWU5_CUR2 0xFFCAF06C /* SWU5 Current Register n */ +#define SWU5_CUR3 0xFFCAF08C /* SWU5 Current Register n */ +#define SWU6_GCTL 0xFFC82000 /* SWU6 Global Control Register */ +#define SWU6_GSTAT 0xFFC82004 /* SWU6 Global Status Register */ +#define SWU6_CTL0 0xFFC82010 /* SWU6 Control Register n */ +#define SWU6_CTL1 0xFFC82030 /* SWU6 Control Register n */ +#define SWU6_CTL2 0xFFC82050 /* SWU6 Control Register n */ +#define SWU6_CTL3 0xFFC82070 /* SWU6 Control Register n */ +#define SWU6_LA0 0xFFC82014 /* SWU6 Lower Address Register n */ +#define SWU6_LA1 0xFFC82034 /* SWU6 Lower Address Register n */ +#define SWU6_LA2 0xFFC82054 /* SWU6 Lower Address Register n */ +#define SWU6_LA3 0xFFC82074 /* SWU6 Lower Address Register n */ +#define SWU6_UA0 0xFFC82018 /* SWU6 Upper Address Register n */ +#define SWU6_UA1 0xFFC82038 /* SWU6 Upper Address Register n */ +#define SWU6_UA2 0xFFC82058 /* SWU6 Upper Address Register n */ +#define SWU6_UA3 0xFFC82078 /* SWU6 Upper Address Register n */ +#define SWU6_ID0 0xFFC8201C /* SWU6 ID Register n */ +#define SWU6_ID1 0xFFC8203C /* SWU6 ID Register n */ +#define SWU6_ID2 0xFFC8205C /* SWU6 ID Register n */ +#define SWU6_ID3 0xFFC8207C /* SWU6 ID Register n */ +#define SWU6_CNT0 0xFFC82020 /* SWU6 Count Register n */ +#define SWU6_CNT1 0xFFC82040 /* SWU6 Count Register n */ +#define SWU6_CNT2 0xFFC82060 /* SWU6 Count Register n */ +#define SWU6_CNT3 0xFFC82080 /* SWU6 Count Register n */ +#define SWU6_TARG0 0xFFC82024 /* SWU6 Target Register n */ +#define SWU6_TARG1 0xFFC82044 /* SWU6 Target Register n */ +#define SWU6_TARG2 0xFFC82064 /* SWU6 Target Register n */ +#define SWU6_TARG3 0xFFC82084 /* SWU6 Target Register n */ +#define SWU6_HIST0 0xFFC82028 /* SWU6 Bandwidth History Register n */ +#define SWU6_HIST1 0xFFC82048 /* SWU6 Bandwidth History Register n */ +#define SWU6_HIST2 0xFFC82068 /* SWU6 Bandwidth History Register n */ +#define SWU6_HIST3 0xFFC82088 /* SWU6 Bandwidth History Register n */ +#define SWU6_CUR0 0xFFC8202C /* SWU6 Current Register n */ +#define SWU6_CUR1 0xFFC8204C /* SWU6 Current Register n */ +#define SWU6_CUR2 0xFFC8206C /* SWU6 Current Register n */ +#define SWU6_CUR3 0xFFC8208C /* SWU6 Current Register n */ +#define SDU0_IDCODE 0xFFC1F020 /* SDU0 ID Code Register */ +#define SDU0_CTL 0xFFC1F050 /* SDU0 Control Register */ +#define SDU0_STAT 0xFFC1F054 /* SDU0 Status Register */ +#define SDU0_MACCTL 0xFFC1F058 /* SDU0 Memory Access Control Register */ +#define SDU0_MACADDR 0xFFC1F05C /* SDU0 Memory Access Address Register */ +#define SDU0_MACDATA 0xFFC1F060 /* SDU0 Memory Access Data Register */ +#define SDU0_DMARD 0xFFC1F064 /* SDU0 DMA Read Data Register */ +#define SDU0_DMAWD 0xFFC1F068 /* SDU0 DMA Write Data Register */ +#define SDU0_MSG 0xFFC1F080 /* SDU0 Message Register */ +#define SDU0_MSG_SET 0xFFC1F084 /* SDU0 Message Set Register */ +#define SDU0_MSG_CLR 0xFFC1F088 /* SDU0 Message Clear Register */ +#define SDU0_GHLT 0xFFC1F08C /* SDU0 Group Halt Register */ +#define EMAC0_MACCFG 0xFFC20000 /* EMAC0 MAC Configuration Register */ +#define EMAC0_MACFRMFILT 0xFFC20004 /* EMAC0 Filter Register for filtering Received Frames */ +#define EMAC0_HASHTBL_HI 0xFFC20008 /* EMAC0 Contains the Upper 32 bits of the hash table */ +#define EMAC0_HASHTBL_LO 0xFFC2000C /* EMAC0 Contains the lower 32 bits of the hash table */ +#define EMAC0_GMII_ADDR 0xFFC20010 /* EMAC0 Management Address Register */ +#define EMAC0_GMII_DATA 0xFFC20014 /* EMAC0 Management Data Register */ +#define EMAC0_FLOWCTL 0xFFC20018 /* EMAC0 MAC FLow Control Register */ +#define EMAC0_VLANTAG 0xFFC2001C /* EMAC0 VLAN Tag Register */ +#define EMAC0_VER 0xFFC20020 /* EMAC0 EMAC Version Register */ +#define EMAC0_DBG 0xFFC20024 /* EMAC0 EMAC Debug Register */ +#define EMAC0_RMTWKUP 0xFFC20028 /* EMAC0 Remote wake up frame register */ +#define EMAC0_PMT_CTLSTAT 0xFFC2002C /* EMAC0 PMT Control and Status Register */ +#define EMAC0_ISTAT 0xFFC20038 /* EMAC0 EMAC Interrupt Status Register */ +#define EMAC0_IMSK 0xFFC2003C /* EMAC0 EMAC Interrupt Mask Register */ +#define EMAC0_ADDR0_HI 0xFFC20040 /* EMAC0 EMAC Address0 High Register */ +#define EMAC0_ADDR0_LO 0xFFC20044 /* EMAC0 EMAC Address0 Low Register */ +#define EMAC0_MMC_CTL 0xFFC20100 /* EMAC0 MMC Control Register */ +#define EMAC0_MMC_RXINT 0xFFC20104 /* EMAC0 MMC RX Interrupt Register */ +#define EMAC0_MMC_TXINT 0xFFC20108 /* EMAC0 MMC TX Interrupt Register */ +#define EMAC0_MMC_RXIMSK 0xFFC2010C /* EMAC0 MMC RX Interrupt Mask Register */ +#define EMAC0_MMC_TXIMSK 0xFFC20110 /* EMAC0 MMC TX Interrupt Mask Register */ +#define EMAC0_TXOCTCNT_GB 0xFFC20114 /* EMAC0 Num bytes transmitted exclusive of preamble */ +#define EMAC0_TXFRMCNT_GB 0xFFC20118 /* EMAC0 Num frames transmitted exclusive of retired */ +#define EMAC0_TXBCASTFRM_G 0xFFC2011C /* EMAC0 Number of good broadcast frames transmitted. */ +#define EMAC0_TXMCASTFRM_G 0xFFC20120 /* EMAC0 Number of good multicast frames transmitted. */ +#define EMAC0_TX64_GB 0xFFC20124 /* EMAC0 Number of 64 byte length frames */ +#define EMAC0_TX65TO127_GB 0xFFC20128 /* EMAC0 Number of frames of length b/w 65-127 (inclusive) bytes */ +#define EMAC0_TX128TO255_GB 0xFFC2012C /* EMAC0 Number of frames of length b/w 128-255 (inclusive) bytes */ +#define EMAC0_TX256TO511_GB 0xFFC20130 /* EMAC0 Number of frames of length b/w 256-511 (inclusive) bytes */ +#define EMAC0_TX512TO1023_GB 0xFFC20134 /* EMAC0 Number of frames of length b/w 512-1023 (inclusive) bytes */ +#define EMAC0_TX1024TOMAX_GB 0xFFC20138 /* EMAC0 Number of frames of length b/w 1024-max (inclusive) bytes */ +#define EMAC0_TXUCASTFRM_GB 0xFFC2013C /* EMAC0 Number of good and bad unicast frames transmitted */ +#define EMAC0_TXMCASTFRM_GB 0xFFC20140 /* EMAC0 Number of good and bad multicast frames transmitted */ +#define EMAC0_TXBCASTFRM_GB 0xFFC20144 /* EMAC0 Number of good and bad broadcast frames transmitted */ +#define EMAC0_TXUNDR_ERR 0xFFC20148 /* EMAC0 Number of frames aborted due to frame underflow error */ +#define EMAC0_TXSNGCOL_G 0xFFC2014C /* EMAC0 Number of transmitted frames after single collision */ +#define EMAC0_TXMULTCOL_G 0xFFC20150 /* EMAC0 Number of transmitted frames with more than one collision */ +#define EMAC0_TXDEFERRED 0xFFC20154 /* EMAC0 Number of transmitted frames after deferral */ +#define EMAC0_TXLATECOL 0xFFC20158 /* EMAC0 Number of frames aborted due to late collision error */ +#define EMAC0_TXEXCESSCOL 0xFFC2015C /* EMAC0 Number of aborted frames due to excessive collisions */ +#define EMAC0_TXCARR_ERR 0xFFC20160 /* EMAC0 Number of aborted frames due to carrier sense error */ +#define EMAC0_TXOCTCNT_G 0xFFC20164 /* EMAC0 Number of bytes transmitted in good frames only */ +#define EMAC0_TXFRMCNT_G 0xFFC20168 /* EMAC0 Number of good frames transmitted. */ +#define EMAC0_TXEXCESSDEF 0xFFC2016C /* EMAC0 Number of frames aborted due to excessive deferral */ +#define EMAC0_TXPAUSEFRM 0xFFC20170 /* EMAC0 Number of good PAUSE frames transmitted. */ +#define EMAC0_TXVLANFRM_G 0xFFC20174 /* EMAC0 Number of VLAN frames transmitted */ +#define EMAC0_RXFRMCNT_GB 0xFFC20180 /* EMAC0 Number of good and bad frames received. */ +#define EMAC0_RXOCTCNT_GB 0xFFC20184 /* EMAC0 Number of bytes received in good and bad frames */ +#define EMAC0_RXOCTCNT_G 0xFFC20188 /* EMAC0 Number of bytes received only in good frames */ +#define EMAC0_RXBCASTFRM_G 0xFFC2018C /* EMAC0 Number of good broadcast frames received. */ +#define EMAC0_RXMCASTFRM_G 0xFFC20190 /* EMAC0 Number of good multicast frames received */ +#define EMAC0_RXCRC_ERR 0xFFC20194 /* EMAC0 Number of frames received with CRC error */ +#define EMAC0_RXALIGN_ERR 0xFFC20198 /* EMAC0 Number of frames with alignment error */ +#define EMAC0_RXRUNT_ERR 0xFFC2019C /* EMAC0 Number of frames received with runt error. */ +#define EMAC0_RXJAB_ERR 0xFFC201A0 /* EMAC0 Number of frames received with length greater than 1518 */ +#define EMAC0_RXUSIZE_G 0xFFC201A4 /* EMAC0 Number of frames received with length 64 */ +#define EMAC0_RXOSIZE_G 0xFFC201A8 /* EMAC0 Number of frames received with length greater than maxium */ +#define EMAC0_RX64_GB 0xFFC201AC /* EMAC0 Number of good and bad frames of lengh 64 bytes */ +#define EMAC0_RX65TO127_GB 0xFFC201B0 /* EMAC0 Number of good and bad frame between 64-127(inclusive) */ +#define EMAC0_RX128TO255_GB 0xFFC201B4 /* EMAC0 Number of good and bad frames received with length between 128 and 255 (inclusive) bytes, exclusive of preamble. */ +#define EMAC0_RX256TO511_GB 0xFFC201B8 /* EMAC0 Number of good and bad frames between 256-511(inclusive) */ +#define EMAC0_RX512TO1023_GB 0xFFC201BC /* EMAC0 Number of good and bad frames received between 512-1023 */ +#define EMAC0_RX1024TOMAX_GB 0xFFC201C0 /* EMAC0 Number of frames received between 1024 and maxsize */ +#define EMAC0_RXUCASTFRM_G 0xFFC201C4 /* EMAC0 Number of good unicast frames received. */ +#define EMAC0_RXLEN_ERR 0xFFC201C8 /* EMAC0 Number of frames received with length error */ +#define EMAC0_RXOORTYPE 0xFFC201CC /* EMAC0 Number of frames with length not equal to valid frame size */ +#define EMAC0_RXPAUSEFRM 0xFFC201D0 /* EMAC0 Number of good and valid PAUSE frames received. */ +#define EMAC0_RXFIFO_OVF 0xFFC201D4 /* EMAC0 Number of missed received frames due to FIFO overflow. This counter is not present in the GMAC-CORE configuration. */ +#define EMAC0_RXVLANFRM_GB 0xFFC201D8 /* EMAC0 Number of good and bad VLAN frames received. */ +#define EMAC0_RXWDOG_ERR 0xFFC201DC /* EMAC0 Frames received with error due to watchdog timeout */ +#define EMAC0_IPC_RXIMSK 0xFFC20200 /* EMAC0 MMC IPC RX Interrupt Mask Register */ +#define EMAC0_IPC_RXINT 0xFFC20208 /* EMAC0 MMC IPC RX Interrupt Register */ +#define EMAC0_RXIPV4_GD_FRM 0xFFC20210 /* EMAC0 Number of good IPv4 datagrams */ +#define EMAC0_RXIPV4_HDR_ERR_FRM 0xFFC20214 /* EMAC0 Number of IPv4 datagrams with header errors */ +#define EMAC0_RXIPV4_NOPAY_FRM 0xFFC20218 /* EMAC0 Number of IPv4 datagrams without checksum */ +#define EMAC0_RXIPV4_FRAG_FRM 0xFFC2021C /* EMAC0 Number of good IPv4 datagrams with fragmentation */ +#define EMAC0_RXIPV4_UDSBL_FRM 0xFFC20220 /* EMAC0 Number of IPv4 UDP datagrams with disabled checksum */ +#define EMAC0_RXIPV6_GD_FRM 0xFFC20224 /* EMAC0 Number of IPv4 datagrams with TCP/UDP/ICMP payloads */ +#define EMAC0_RXIPV6_HDR_ERR_FRM 0xFFC20228 /* EMAC0 Number of IPv6 datagrams with header errors */ +#define EMAC0_RXIPV6_NOPAY_FRM 0xFFC2022C /* EMAC0 Number of IPv6 datagrams with no TCP/UDP/ICMP payload */ +#define EMAC0_RXUDP_GD_FRM 0xFFC20230 /* EMAC0 Number of good IP datagrames with good UDP payload */ +#define EMAC0_RXUDP_ERR_FRM 0xFFC20234 /* EMAC0 Number of good IP datagrams with UDP checksum errors */ +#define EMAC0_RXTCP_GD_FRM 0xFFC20238 /* EMAC0 Number of good IP datagrams with a good TCP payload */ +#define EMAC0_RXTCP_ERR_FRM 0xFFC2023C /* EMAC0 Number of good IP datagrams with TCP checksum errors */ +#define EMAC0_RXICMP_GD_FRM 0xFFC20240 /* EMAC0 Number of good IP datagrams with a good ICMP payload */ +#define EMAC0_RXICMP_ERR_FRM 0xFFC20244 /* EMAC0 Number of good IP datagrams with ICMP checksum errors */ +#define EMAC0_RXIPV4_GD_OCT 0xFFC20250 /* EMAC0 Bytes received in IPv4 datagrams including tcp,udp or icmp */ +#define EMAC0_RXIPV4_HDR_ERR_OCT 0xFFC20254 /* EMAC0 Bytes received in IPv4 datagrams with header errors */ +#define EMAC0_RXIPV4_NOPAY_OCT 0xFFC20258 /* EMAC0 Bytes received in IPv4 datagrams without tcp,udp,icmp load */ +#define EMAC0_RXIPV4_FRAG_OCT 0xFFC2025C /* EMAC0 Bytes received in fragmented IPv4 datagrams */ +#define EMAC0_RXIPV4_UDSBL_OCT 0xFFC20260 /* EMAC0 Bytes received in UDP segment with checksum disabled */ +#define EMAC0_RXIPV6_GD_OCT 0xFFC20264 /* EMAC0 Bytes received in good IPv6 including tcp,udp or icmp load */ +#define EMAC0_RXIPV6_HDR_ERR_OCT 0xFFC20268 /* EMAC0 Number of bytes received in IPv6 with header errors */ +#define EMAC0_RXIPV6_NOPAY_OCT 0xFFC2026C /* EMAC0 Bytes received in IPv6 without tcp,udp or icmp load */ +#define EMAC0_RXUDP_GD_OCT 0xFFC20270 /* EMAC0 Number of bytes received in good UDP segments */ +#define EMAC0_RXUDP_ERR_OCT 0xFFC20274 /* EMAC0 Number of bytes received in UDP segment with checksum err */ +#define EMAC0_RXTCP_GD_OCT 0xFFC20278 /* EMAC0 Number of bytes received in a good TCP segment */ +#define EMAC0_RXTCP_ERR_OCT 0xFFC2027C /* EMAC0 Number of bytes received in TCP segment with checksum err */ +#define EMAC0_RXICMP_GD_OCT 0xFFC20280 /* EMAC0 Number of bytes received in a good ICMP segment */ +#define EMAC0_RXICMP_ERR_OCT 0xFFC20284 /* EMAC0 Bytes received in an ICMP segment with checksum errors */ +#define EMAC0_TM_CTL 0xFFC20700 /* EMAC0 EMAC Time Stamp Control Register */ +#define EMAC0_TM_SUBSEC 0xFFC20704 /* EMAC0 EMAC Time Stamp Sub Second Increment */ +#define EMAC0_TM_SEC 0xFFC20708 /* EMAC0 EMAC Time Stamp Second Register */ +#define EMAC0_TM_NSEC 0xFFC2070C /* EMAC0 EMAC Time Stamp Nano Second Register */ +#define EMAC0_TM_SECUPDT 0xFFC20710 /* EMAC0 EMAC Time Stamp Seconds Update */ +#define EMAC0_TM_NSECUPDT 0xFFC20714 /* EMAC0 EMAC Time Stamp Nano Seconds Update */ +#define EMAC0_TM_ADDEND 0xFFC20718 /* EMAC0 EMAC Time Stamp Addend Register */ +#define EMAC0_TM_TGTM 0xFFC2071C /* EMAC0 EMAC Time Stamp Target Time Sec. */ +#define EMAC0_TM_NTGTM 0xFFC20720 /* EMAC0 EMAC Time Stamp Target Time Nanosec. */ +#define EMAC0_TM_HISEC 0xFFC20724 /* EMAC0 EMAC Time Stamp High Second Register */ +#define EMAC0_TM_STMPSTAT 0xFFC20728 /* EMAC0 EMAC Time Stamp Status Register */ +#define EMAC0_TM_PPSCTL 0xFFC2072C /* EMAC0 EMAC PPS Control Register */ +#define EMAC0_TM_AUXSTMP_NSEC 0xFFC20730 /* EMAC0 EMAC Auxillary Time Stamp Nano Register */ +#define EMAC0_TM_AUXSTMP_SEC 0xFFC20734 /* EMAC0 EMAC Auxillary Time Stamp Sec Register */ +#define EMAC0_DMA_BUSMODE 0xFFC21000 /* EMAC0 Bus Operating Modes for EMAC DMA */ +#define EMAC0_DMA_TXPOLL 0xFFC21004 /* EMAC0 TX DMA Poll demand register */ +#define EMAC0_DMA_RXPOLL 0xFFC21008 /* EMAC0 RX DMA Poll demand register */ +#define EMAC0_DMA_RXDSC_ADDR 0xFFC2100C /* EMAC0 RX Descriptor List Address */ +#define EMAC0_DMA_TXDSC_ADDR 0xFFC21010 /* EMAC0 TX Descriptor List Address */ +#define EMAC0_DMA_STAT 0xFFC21014 /* EMAC0 DMA Status Register */ +#define EMAC0_DMA_OPMODE 0xFFC21018 /* EMAC0 DMA Operation Mode Register */ +#define EMAC0_DMA_IEN 0xFFC2101C /* EMAC0 DMA Interrupt Enable Register */ +#define EMAC0_DMA_MISS_FRM 0xFFC21020 /* EMAC0 DMA missed frame and buffer overflow counter */ +#define EMAC0_DMA_RXIWDOG 0xFFC21024 /* EMAC0 DMA RX Interrupt Watch Dog timer */ +#define EMAC0_DMA_BMMODE 0xFFC21028 /* EMAC0 AXI Bus Mode Register */ +#define EMAC0_DMA_BMSTAT 0xFFC2102C /* EMAC0 AXI Status Register */ +#define EMAC0_DMA_TXDSC_CUR 0xFFC21048 /* EMAC0 TX current descriptor register */ +#define EMAC0_DMA_RXDSC_CUR 0xFFC2104C /* EMAC0 RX current descriptor register */ +#define EMAC0_DMA_TXBUF_CUR 0xFFC21050 /* EMAC0 TX current buffer pointer register */ +#define EMAC0_DMA_RXBUF_CUR 0xFFC21054 /* EMAC0 RX current buffer pointer register */ +#define EMAC0_HWFEAT 0xFFC21058 /* EMAC0 Hardware Feature Register */ +#define EMAC1_MACCFG 0xFFC22000 /* EMAC1 MAC Configuration Register */ +#define EMAC1_MACFRMFILT 0xFFC22004 /* EMAC1 Filter Register for filtering Received Frames */ +#define EMAC1_HASHTBL_HI 0xFFC22008 /* EMAC1 Contains the Upper 32 bits of the hash table */ +#define EMAC1_HASHTBL_LO 0xFFC2200C /* EMAC1 Contains the lower 32 bits of the hash table */ +#define EMAC1_GMII_ADDR 0xFFC22010 /* EMAC1 Management Address Register */ +#define EMAC1_GMII_DATA 0xFFC22014 /* EMAC1 Management Data Register */ +#define EMAC1_FLOWCTL 0xFFC22018 /* EMAC1 MAC FLow Control Register */ +#define EMAC1_VLANTAG 0xFFC2201C /* EMAC1 VLAN Tag Register */ +#define EMAC1_VER 0xFFC22020 /* EMAC1 EMAC Version Register */ +#define EMAC1_DBG 0xFFC22024 /* EMAC1 EMAC Debug Register */ +#define EMAC1_RMTWKUP 0xFFC22028 /* EMAC1 Remote wake up frame register */ +#define EMAC1_PMT_CTLSTAT 0xFFC2202C /* EMAC1 PMT Control and Status Register */ +#define EMAC1_ISTAT 0xFFC22038 /* EMAC1 EMAC Interrupt Status Register */ +#define EMAC1_IMSK 0xFFC2203C /* EMAC1 EMAC Interrupt Mask Register */ +#define EMAC1_ADDR0_HI 0xFFC22040 /* EMAC1 EMAC Address0 High Register */ +#define EMAC1_ADDR0_LO 0xFFC22044 /* EMAC1 EMAC Address0 Low Register */ +#define EMAC1_MMC_CTL 0xFFC22100 /* EMAC1 MMC Control Register */ +#define EMAC1_MMC_RXINT 0xFFC22104 /* EMAC1 MMC RX Interrupt Register */ +#define EMAC1_MMC_TXINT 0xFFC22108 /* EMAC1 MMC TX Interrupt Register */ +#define EMAC1_MMC_RXIMSK 0xFFC2210C /* EMAC1 MMC RX Interrupt Mask Register */ +#define EMAC1_MMC_TXIMSK 0xFFC22110 /* EMAC1 MMC TX Interrupt Mask Register */ +#define EMAC1_TXOCTCNT_GB 0xFFC22114 /* EMAC1 Num bytes transmitted exclusive of preamble */ +#define EMAC1_TXFRMCNT_GB 0xFFC22118 /* EMAC1 Num frames transmitted exclusive of retired */ +#define EMAC1_TXBCASTFRM_G 0xFFC2211C /* EMAC1 Number of good broadcast frames transmitted. */ +#define EMAC1_TXMCASTFRM_G 0xFFC22120 /* EMAC1 Number of good multicast frames transmitted. */ +#define EMAC1_TX64_GB 0xFFC22124 /* EMAC1 Number of 64 byte length frames */ +#define EMAC1_TX65TO127_GB 0xFFC22128 /* EMAC1 Number of frames of length b/w 65-127 (inclusive) bytes */ +#define EMAC1_TX128TO255_GB 0xFFC2212C /* EMAC1 Number of frames of length b/w 128-255 (inclusive) bytes */ +#define EMAC1_TX256TO511_GB 0xFFC22130 /* EMAC1 Number of frames of length b/w 256-511 (inclusive) bytes */ +#define EMAC1_TX512TO1023_GB 0xFFC22134 /* EMAC1 Number of frames of length b/w 512-1023 (inclusive) bytes */ +#define EMAC1_TX1024TOMAX_GB 0xFFC22138 /* EMAC1 Number of frames of length b/w 1024-max (inclusive) bytes */ +#define EMAC1_TXUCASTFRM_GB 0xFFC2213C /* EMAC1 Number of good and bad unicast frames transmitted */ +#define EMAC1_TXMCASTFRM_GB 0xFFC22140 /* EMAC1 Number of good and bad multicast frames transmitted */ +#define EMAC1_TXBCASTFRM_GB 0xFFC22144 /* EMAC1 Number of good and bad broadcast frames transmitted */ +#define EMAC1_TXUNDR_ERR 0xFFC22148 /* EMAC1 Number of frames aborted due to frame underflow error */ +#define EMAC1_TXSNGCOL_G 0xFFC2214C /* EMAC1 Number of transmitted frames after single collision */ +#define EMAC1_TXMULTCOL_G 0xFFC22150 /* EMAC1 Number of transmitted frames with more than one collision */ +#define EMAC1_TXDEFERRED 0xFFC22154 /* EMAC1 Number of transmitted frames after deferral */ +#define EMAC1_TXLATECOL 0xFFC22158 /* EMAC1 Number of frames aborted due to late collision error */ +#define EMAC1_TXEXCESSCOL 0xFFC2215C /* EMAC1 Number of aborted frames due to excessive collisions */ +#define EMAC1_TXCARR_ERR 0xFFC22160 /* EMAC1 Number of aborted frames due to carrier sense error */ +#define EMAC1_TXOCTCNT_G 0xFFC22164 /* EMAC1 Number of bytes transmitted in good frames only */ +#define EMAC1_TXFRMCNT_G 0xFFC22168 /* EMAC1 Number of good frames transmitted. */ +#define EMAC1_TXEXCESSDEF 0xFFC2216C /* EMAC1 Number of frames aborted due to excessive deferral */ +#define EMAC1_TXPAUSEFRM 0xFFC22170 /* EMAC1 Number of good PAUSE frames transmitted. */ +#define EMAC1_TXVLANFRM_G 0xFFC22174 /* EMAC1 Number of VLAN frames transmitted */ +#define EMAC1_RXFRMCNT_GB 0xFFC22180 /* EMAC1 Number of good and bad frames received. */ +#define EMAC1_RXOCTCNT_GB 0xFFC22184 /* EMAC1 Number of bytes received in good and bad frames */ +#define EMAC1_RXOCTCNT_G 0xFFC22188 /* EMAC1 Number of bytes received only in good frames */ +#define EMAC1_RXBCASTFRM_G 0xFFC2218C /* EMAC1 Number of good broadcast frames received. */ +#define EMAC1_RXMCASTFRM_G 0xFFC22190 /* EMAC1 Number of good multicast frames received */ +#define EMAC1_RXCRC_ERR 0xFFC22194 /* EMAC1 Number of frames received with CRC error */ +#define EMAC1_RXALIGN_ERR 0xFFC22198 /* EMAC1 Number of frames with alignment error */ +#define EMAC1_RXRUNT_ERR 0xFFC2219C /* EMAC1 Number of frames received with runt error. */ +#define EMAC1_RXJAB_ERR 0xFFC221A0 /* EMAC1 Number of frames received with length greater than 1518 */ +#define EMAC1_RXUSIZE_G 0xFFC221A4 /* EMAC1 Number of frames received with length 64 */ +#define EMAC1_RXOSIZE_G 0xFFC221A8 /* EMAC1 Number of frames received with length greater than maxium */ +#define EMAC1_RX64_GB 0xFFC221AC /* EMAC1 Number of good and bad frames of lengh 64 bytes */ +#define EMAC1_RX65TO127_GB 0xFFC221B0 /* EMAC1 Number of good and bad frame between 64-127(inclusive) */ +#define EMAC1_RX128TO255_GB 0xFFC221B4 /* EMAC1 Number of good and bad frames received with length between 128 and 255 (inclusive) bytes, exclusive of preamble. */ +#define EMAC1_RX256TO511_GB 0xFFC221B8 /* EMAC1 Number of good and bad frames between 256-511(inclusive) */ +#define EMAC1_RX512TO1023_GB 0xFFC221BC /* EMAC1 Number of good and bad frames received between 512-1023 */ +#define EMAC1_RX1024TOMAX_GB 0xFFC221C0 /* EMAC1 Number of frames received between 1024 and maxsize */ +#define EMAC1_RXUCASTFRM_G 0xFFC221C4 /* EMAC1 Number of good unicast frames received. */ +#define EMAC1_RXLEN_ERR 0xFFC221C8 /* EMAC1 Number of frames received with length error */ +#define EMAC1_RXOORTYPE 0xFFC221CC /* EMAC1 Number of frames with length not equal to valid frame size */ +#define EMAC1_RXPAUSEFRM 0xFFC221D0 /* EMAC1 Number of good and valid PAUSE frames received. */ +#define EMAC1_RXFIFO_OVF 0xFFC221D4 /* EMAC1 Number of missed received frames due to FIFO overflow. This counter is not present in the GMAC-CORE configuration. */ +#define EMAC1_RXVLANFRM_GB 0xFFC221D8 /* EMAC1 Number of good and bad VLAN frames received. */ +#define EMAC1_RXWDOG_ERR 0xFFC221DC /* EMAC1 Frames received with error due to watchdog timeout */ +#define EMAC1_IPC_RXIMSK 0xFFC22200 /* EMAC1 MMC IPC RX Interrupt Mask Register */ +#define EMAC1_IPC_RXINT 0xFFC22208 /* EMAC1 MMC IPC RX Interrupt Register */ +#define EMAC1_RXIPV4_GD_FRM 0xFFC22210 /* EMAC1 Number of good IPv4 datagrams */ +#define EMAC1_RXIPV4_HDR_ERR_FRM 0xFFC22214 /* EMAC1 Number of IPv4 datagrams with header errors */ +#define EMAC1_RXIPV4_NOPAY_FRM 0xFFC22218 /* EMAC1 Number of IPv4 datagrams without checksum */ +#define EMAC1_RXIPV4_FRAG_FRM 0xFFC2221C /* EMAC1 Number of good IPv4 datagrams with fragmentation */ +#define EMAC1_RXIPV4_UDSBL_FRM 0xFFC22220 /* EMAC1 Number of IPv4 UDP datagrams with disabled checksum */ +#define EMAC1_RXIPV6_GD_FRM 0xFFC22224 /* EMAC1 Number of IPv4 datagrams with TCP/UDP/ICMP payloads */ +#define EMAC1_RXIPV6_HDR_ERR_FRM 0xFFC22228 /* EMAC1 Number of IPv6 datagrams with header errors */ +#define EMAC1_RXIPV6_NOPAY_FRM 0xFFC2222C /* EMAC1 Number of IPv6 datagrams with no TCP/UDP/ICMP payload */ +#define EMAC1_RXUDP_GD_FRM 0xFFC22230 /* EMAC1 Number of good IP datagrames with good UDP payload */ +#define EMAC1_RXUDP_ERR_FRM 0xFFC22234 /* EMAC1 Number of good IP datagrams with UDP checksum errors */ +#define EMAC1_RXTCP_GD_FRM 0xFFC22238 /* EMAC1 Number of good IP datagrams with a good TCP payload */ +#define EMAC1_RXTCP_ERR_FRM 0xFFC2223C /* EMAC1 Number of good IP datagrams with TCP checksum errors */ +#define EMAC1_RXICMP_GD_FRM 0xFFC22240 /* EMAC1 Number of good IP datagrams with a good ICMP payload */ +#define EMAC1_RXICMP_ERR_FRM 0xFFC22244 /* EMAC1 Number of good IP datagrams with ICMP checksum errors */ +#define EMAC1_RXIPV4_GD_OCT 0xFFC22250 /* EMAC1 Bytes received in IPv4 datagrams including tcp,udp or icmp */ +#define EMAC1_RXIPV4_HDR_ERR_OCT 0xFFC22254 /* EMAC1 Bytes received in IPv4 datagrams with header errors */ +#define EMAC1_RXIPV4_NOPAY_OCT 0xFFC22258 /* EMAC1 Bytes received in IPv4 datagrams without tcp,udp,icmp load */ +#define EMAC1_RXIPV4_FRAG_OCT 0xFFC2225C /* EMAC1 Bytes received in fragmented IPv4 datagrams */ +#define EMAC1_RXIPV4_UDSBL_OCT 0xFFC22260 /* EMAC1 Bytes received in UDP segment with checksum disabled */ +#define EMAC1_RXIPV6_GD_OCT 0xFFC22264 /* EMAC1 Bytes received in good IPv6 including tcp,udp or icmp load */ +#define EMAC1_RXIPV6_HDR_ERR_OCT 0xFFC22268 /* EMAC1 Number of bytes received in IPv6 with header errors */ +#define EMAC1_RXIPV6_NOPAY_OCT 0xFFC2226C /* EMAC1 Bytes received in IPv6 without tcp,udp or icmp load */ +#define EMAC1_RXUDP_GD_OCT 0xFFC22270 /* EMAC1 Number of bytes received in good UDP segments */ +#define EMAC1_RXUDP_ERR_OCT 0xFFC22274 /* EMAC1 Number of bytes received in UDP segment with checksum err */ +#define EMAC1_RXTCP_GD_OCT 0xFFC22278 /* EMAC1 Number of bytes received in a good TCP segment */ +#define EMAC1_RXTCP_ERR_OCT 0xFFC2227C /* EMAC1 Number of bytes received in TCP segment with checksum err */ +#define EMAC1_RXICMP_GD_OCT 0xFFC22280 /* EMAC1 Number of bytes received in a good ICMP segment */ +#define EMAC1_RXICMP_ERR_OCT 0xFFC22284 /* EMAC1 Bytes received in an ICMP segment with checksum errors */ +#define EMAC1_TM_CTL 0xFFC22700 /* EMAC1 EMAC Time Stamp Control Register */ +#define EMAC1_TM_SUBSEC 0xFFC22704 /* EMAC1 EMAC Time Stamp Sub Second Increment */ +#define EMAC1_TM_SEC 0xFFC22708 /* EMAC1 EMAC Time Stamp Second Register */ +#define EMAC1_TM_NSEC 0xFFC2270C /* EMAC1 EMAC Time Stamp Nano Second Register */ +#define EMAC1_TM_SECUPDT 0xFFC22710 /* EMAC1 EMAC Time Stamp Seconds Update */ +#define EMAC1_TM_NSECUPDT 0xFFC22714 /* EMAC1 EMAC Time Stamp Nano Seconds Update */ +#define EMAC1_TM_ADDEND 0xFFC22718 /* EMAC1 EMAC Time Stamp Addend Register */ +#define EMAC1_TM_TGTM 0xFFC2271C /* EMAC1 EMAC Time Stamp Target Time Sec. */ +#define EMAC1_TM_NTGTM 0xFFC22720 /* EMAC1 EMAC Time Stamp Target Time Nanosec. */ +#define EMAC1_TM_HISEC 0xFFC22724 /* EMAC1 EMAC Time Stamp High Second Register */ +#define EMAC1_TM_STMPSTAT 0xFFC22728 /* EMAC1 EMAC Time Stamp Status Register */ +#define EMAC1_TM_PPSCTL 0xFFC2272C /* EMAC1 EMAC PPS Control Register */ +#define EMAC1_TM_AUXSTMP_NSEC 0xFFC22730 /* EMAC1 EMAC Auxillary Time Stamp Nano Register */ +#define EMAC1_TM_AUXSTMP_SEC 0xFFC22734 /* EMAC1 EMAC Auxillary Time Stamp Sec Register */ +#define EMAC1_DMA_BUSMODE 0xFFC23000 /* EMAC1 Bus Operating Modes for EMAC DMA */ +#define EMAC1_DMA_TXPOLL 0xFFC23004 /* EMAC1 TX DMA Poll demand register */ +#define EMAC1_DMA_RXPOLL 0xFFC23008 /* EMAC1 RX DMA Poll demand register */ +#define EMAC1_DMA_RXDSC_ADDR 0xFFC2300C /* EMAC1 RX Descriptor List Address */ +#define EMAC1_DMA_TXDSC_ADDR 0xFFC23010 /* EMAC1 TX Descriptor List Address */ +#define EMAC1_DMA_STAT 0xFFC23014 /* EMAC1 DMA Status Register */ +#define EMAC1_DMA_OPMODE 0xFFC23018 /* EMAC1 DMA Operation Mode Register */ +#define EMAC1_DMA_IEN 0xFFC2301C /* EMAC1 DMA Interrupt Enable Register */ +#define EMAC1_DMA_MISS_FRM 0xFFC23020 /* EMAC1 DMA missed frame and buffer overflow counter */ +#define EMAC1_DMA_RXIWDOG 0xFFC23024 /* EMAC1 DMA RX Interrupt Watch Dog timer */ +#define EMAC1_DMA_BMMODE 0xFFC23028 /* EMAC1 AXI Bus Mode Register */ +#define EMAC1_DMA_BMSTAT 0xFFC2302C /* EMAC1 AXI Status Register */ +#define EMAC1_DMA_TXDSC_CUR 0xFFC23048 /* EMAC1 TX current descriptor register */ +#define EMAC1_DMA_RXDSC_CUR 0xFFC2304C /* EMAC1 RX current descriptor register */ +#define EMAC1_DMA_TXBUF_CUR 0xFFC23050 /* EMAC1 TX current buffer pointer register */ +#define EMAC1_DMA_RXBUF_CUR 0xFFC23054 /* EMAC1 RX current buffer pointer register */ +#define EMAC1_HWFEAT 0xFFC23058 /* EMAC1 Hardware Feature Register */ +#define SPORT0_CTL_A 0xFFC40000 /* SPORT0 'A' Control Register */ +#define SPORT0_DIV_A 0xFFC40004 /* SPORT0 'A' Clock and FS Divide Register */ +#define SPORT0_MCTL_A 0xFFC40008 /* SPORT0 'A' Multichannel Control Register */ +#define SPORT0_CS0_A 0xFFC4000C /* SPORT0 'A' Multichannel Select Register (Channels 0-31) */ +#define SPORT0_CS1_A 0xFFC40010 /* SPORT0 'A' Multichannel Select Register (Channels 32-63) */ +#define SPORT0_CS2_A 0xFFC40014 /* SPORT0 'A' Multichannel Select Register (Channels 64-95) */ +#define SPORT0_CS3_A 0xFFC40018 /* SPORT0 'A' Multichannel Select Register (Channels 96-127) */ +#define SPORT0_CNT_A 0xFFC4001C /* SPORT0 'A' Frame Sync And Clock Divisor Current Count */ +#define SPORT0_ERR_A 0xFFC40020 /* SPORT0 'A' Error Register */ +#define SPORT0_MSTAT_A 0xFFC40024 /* SPORT0 'A' Multichannel Mode Status Register */ +#define SPORT0_CTL2_A 0xFFC40028 /* SPORT0 'A' Control Register 2 */ +#define SPORT0_TXPRI_A 0xFFC40040 /* SPORT0 'A' Primary Channel Transmit Buffer Register */ +#define SPORT0_RXPRI_A 0xFFC40044 /* SPORT0 'A' Primary Channel Receive Buffer Register */ +#define SPORT0_TXSEC_A 0xFFC40048 /* SPORT0 'A' Secondary Channel Transmit Buffer Register */ +#define SPORT0_RXSEC_A 0xFFC4004C /* SPORT0 'A' Secondary Channel Receive Buffer Register */ +#define SPORT0_CTL_B 0xFFC40080 /* SPORT0 'B' Control Register */ +#define SPORT0_DIV_B 0xFFC40084 /* SPORT0 'B' Clock and FS Divide Register */ +#define SPORT0_MCTL_B 0xFFC40088 /* SPORT0 'B' Multichannel Control Register */ +#define SPORT0_CS0_B 0xFFC4008C /* SPORT0 'B' Multichannel Select Register (Channels 0-31) */ +#define SPORT0_CS1_B 0xFFC40090 /* SPORT0 'B' Multichannel Select Register (Channels 32-63) */ +#define SPORT0_CS2_B 0xFFC40094 /* SPORT0 'B' Multichannel Select Register (Channels 64-95) */ +#define SPORT0_CS3_B 0xFFC40098 /* SPORT0 'B' Multichannel Select Register (Channels 96-127) */ +#define SPORT0_CNT_B 0xFFC4009C /* SPORT0 'B' Frame Sync And Clock Divisor Current Count */ +#define SPORT0_ERR_B 0xFFC400A0 /* SPORT0 'B' Error Register */ +#define SPORT0_MSTAT_B 0xFFC400A4 /* SPORT0 'B' Multichannel Mode Status Register */ +#define SPORT0_CTL2_B 0xFFC400A8 /* SPORT0 'B' Control Register 2 */ +#define SPORT0_TXPRI_B 0xFFC400C0 /* SPORT0 'B' Primary Channel Transmit Buffer Register */ +#define SPORT0_RXPRI_B 0xFFC400C4 /* SPORT0 'B' Primary Channel Receive Buffer Register */ +#define SPORT0_TXSEC_B 0xFFC400C8 /* SPORT0 'B' Secondary Channel Transmit Buffer Register */ +#define SPORT0_RXSEC_B 0xFFC400CC /* SPORT0 'B' Secondary Channel Receive Buffer Register */ +#define SPORT1_CTL_A 0xFFC40100 /* SPORT1 'A' Control Register */ +#define SPORT1_DIV_A 0xFFC40104 /* SPORT1 'A' Clock and FS Divide Register */ +#define SPORT1_MCTL_A 0xFFC40108 /* SPORT1 'A' Multichannel Control Register */ +#define SPORT1_CS0_A 0xFFC4010C /* SPORT1 'A' Multichannel Select Register (Channels 0-31) */ +#define SPORT1_CS1_A 0xFFC40110 /* SPORT1 'A' Multichannel Select Register (Channels 32-63) */ +#define SPORT1_CS2_A 0xFFC40114 /* SPORT1 'A' Multichannel Select Register (Channels 64-95) */ +#define SPORT1_CS3_A 0xFFC40118 /* SPORT1 'A' Multichannel Select Register (Channels 96-127) */ +#define SPORT1_CNT_A 0xFFC4011C /* SPORT1 'A' Frame Sync And Clock Divisor Current Count */ +#define SPORT1_ERR_A 0xFFC40120 /* SPORT1 'A' Error Register */ +#define SPORT1_MSTAT_A 0xFFC40124 /* SPORT1 'A' Multichannel Mode Status Register */ +#define SPORT1_CTL2_A 0xFFC40128 /* SPORT1 'A' Control Register 2 */ +#define SPORT1_TXPRI_A 0xFFC40140 /* SPORT1 'A' Primary Channel Transmit Buffer Register */ +#define SPORT1_RXPRI_A 0xFFC40144 /* SPORT1 'A' Primary Channel Receive Buffer Register */ +#define SPORT1_TXSEC_A 0xFFC40148 /* SPORT1 'A' Secondary Channel Transmit Buffer Register */ +#define SPORT1_RXSEC_A 0xFFC4014C /* SPORT1 'A' Secondary Channel Receive Buffer Register */ +#define SPORT1_CTL_B 0xFFC40180 /* SPORT1 'B' Control Register */ +#define SPORT1_DIV_B 0xFFC40184 /* SPORT1 'B' Clock and FS Divide Register */ +#define SPORT1_MCTL_B 0xFFC40188 /* SPORT1 'B' Multichannel Control Register */ +#define SPORT1_CS0_B 0xFFC4018C /* SPORT1 'B' Multichannel Select Register (Channels 0-31) */ +#define SPORT1_CS1_B 0xFFC40190 /* SPORT1 'B' Multichannel Select Register (Channels 32-63) */ +#define SPORT1_CS2_B 0xFFC40194 /* SPORT1 'B' Multichannel Select Register (Channels 64-95) */ +#define SPORT1_CS3_B 0xFFC40198 /* SPORT1 'B' Multichannel Select Register (Channels 96-127) */ +#define SPORT1_CNT_B 0xFFC4019C /* SPORT1 'B' Frame Sync And Clock Divisor Current Count */ +#define SPORT1_ERR_B 0xFFC401A0 /* SPORT1 'B' Error Register */ +#define SPORT1_MSTAT_B 0xFFC401A4 /* SPORT1 'B' Multichannel Mode Status Register */ +#define SPORT1_CTL2_B 0xFFC401A8 /* SPORT1 'B' Control Register 2 */ +#define SPORT1_TXPRI_B 0xFFC401C0 /* SPORT1 'B' Primary Channel Transmit Buffer Register */ +#define SPORT1_RXPRI_B 0xFFC401C4 /* SPORT1 'B' Primary Channel Receive Buffer Register */ +#define SPORT1_TXSEC_B 0xFFC401C8 /* SPORT1 'B' Secondary Channel Transmit Buffer Register */ +#define SPORT1_RXSEC_B 0xFFC401CC /* SPORT1 'B' Secondary Channel Receive Buffer Register */ +#define SPORT2_CTL_A 0xFFC40200 /* SPORT2 'A' Control Register */ +#define SPORT2_DIV_A 0xFFC40204 /* SPORT2 'A' Clock and FS Divide Register */ +#define SPORT2_MCTL_A 0xFFC40208 /* SPORT2 'A' Multichannel Control Register */ +#define SPORT2_CS0_A 0xFFC4020C /* SPORT2 'A' Multichannel Select Register (Channels 0-31) */ +#define SPORT2_CS1_A 0xFFC40210 /* SPORT2 'A' Multichannel Select Register (Channels 32-63) */ +#define SPORT2_CS2_A 0xFFC40214 /* SPORT2 'A' Multichannel Select Register (Channels 64-95) */ +#define SPORT2_CS3_A 0xFFC40218 /* SPORT2 'A' Multichannel Select Register (Channels 96-127) */ +#define SPORT2_CNT_A 0xFFC4021C /* SPORT2 'A' Frame Sync And Clock Divisor Current Count */ +#define SPORT2_ERR_A 0xFFC40220 /* SPORT2 'A' Error Register */ +#define SPORT2_MSTAT_A 0xFFC40224 /* SPORT2 'A' Multichannel Mode Status Register */ +#define SPORT2_CTL2_A 0xFFC40228 /* SPORT2 'A' Control Register 2 */ +#define SPORT2_TXPRI_A 0xFFC40240 /* SPORT2 'A' Primary Channel Transmit Buffer Register */ +#define SPORT2_RXPRI_A 0xFFC40244 /* SPORT2 'A' Primary Channel Receive Buffer Register */ +#define SPORT2_TXSEC_A 0xFFC40248 /* SPORT2 'A' Secondary Channel Transmit Buffer Register */ +#define SPORT2_RXSEC_A 0xFFC4024C /* SPORT2 'A' Secondary Channel Receive Buffer Register */ +#define SPORT2_CTL_B 0xFFC40280 /* SPORT2 'B' Control Register */ +#define SPORT2_DIV_B 0xFFC40284 /* SPORT2 'B' Clock and FS Divide Register */ +#define SPORT2_MCTL_B 0xFFC40288 /* SPORT2 'B' Multichannel Control Register */ +#define SPORT2_CS0_B 0xFFC4028C /* SPORT2 'B' Multichannel Select Register (Channels 0-31) */ +#define SPORT2_CS1_B 0xFFC40290 /* SPORT2 'B' Multichannel Select Register (Channels 32-63) */ +#define SPORT2_CS2_B 0xFFC40294 /* SPORT2 'B' Multichannel Select Register (Channels 64-95) */ +#define SPORT2_CS3_B 0xFFC40298 /* SPORT2 'B' Multichannel Select Register (Channels 96-127) */ +#define SPORT2_CNT_B 0xFFC4029C /* SPORT2 'B' Frame Sync And Clock Divisor Current Count */ +#define SPORT2_ERR_B 0xFFC402A0 /* SPORT2 'B' Error Register */ +#define SPORT2_MSTAT_B 0xFFC402A4 /* SPORT2 'B' Multichannel Mode Status Register */ +#define SPORT2_CTL2_B 0xFFC402A8 /* SPORT2 'B' Control Register 2 */ +#define SPORT2_TXPRI_B 0xFFC402C0 /* SPORT2 'B' Primary Channel Transmit Buffer Register */ +#define SPORT2_RXPRI_B 0xFFC402C4 /* SPORT2 'B' Primary Channel Receive Buffer Register */ +#define SPORT2_TXSEC_B 0xFFC402C8 /* SPORT2 'B' Secondary Channel Transmit Buffer Register */ +#define SPORT2_RXSEC_B 0xFFC402CC /* SPORT2 'B' Secondary Channel Receive Buffer Register */ +#define SPI0_REGBASE 0xFFC40400 +#define SPI0_CTL 0xFFC40404 /* SPI0 Control Register */ +#define SPI0_RXCTL 0xFFC40408 /* SPI0 RX Control Register */ +#define SPI0_TXCTL 0xFFC4040C /* SPI0 TX Control Register */ +#define SPI0_CLK 0xFFC40410 /* SPI0 Clock Rate Register */ +#define SPI0_DLY 0xFFC40414 /* SPI0 Delay Register */ +#define SPI0_SLVSEL 0xFFC40418 /* SPI0 Slave Select Register */ +#define SPI0_RWC 0xFFC4041C /* SPI0 Received Word-Count Register */ +#define SPI0_RWCR 0xFFC40420 /* SPI0 Received Word-Count Reload Register */ +#define SPI0_TWC 0xFFC40424 /* SPI0 Transmitted Word-Count Register */ +#define SPI0_TWCR 0xFFC40428 /* SPI0 Transmitted Word-Count Reload Register */ +#define SPI0_IMSK 0xFFC40430 /* SPI0 Interrupt Mask Register */ +#define SPI0_IMSK_CLR 0xFFC40434 /* SPI0 Interrupt Mask Clear Register */ +#define SPI0_IMSK_SET 0xFFC40438 /* SPI0 Interrupt Mask Set Register */ +#define SPI0_STAT 0xFFC40440 /* SPI0 Status Register */ +#define SPI0_ILAT 0xFFC40444 /* SPI0 Masked Interrupt Condition Register */ +#define SPI0_ILAT_CLR 0xFFC40448 /* SPI0 Masked Interrupt Clear Register */ +#define SPI0_RFIFO 0xFFC40450 /* SPI0 Receive FIFO Data Register */ +#define SPI0_TFIFO 0xFFC40458 /* SPI0 Transmit FIFO Data Register */ +#define SPI1_REGBASE 0xFFC40500 +#define SPI1_CTL 0xFFC40504 /* SPI1 Control Register */ +#define SPI1_RXCTL 0xFFC40508 /* SPI1 RX Control Register */ +#define SPI1_TXCTL 0xFFC4050C /* SPI1 TX Control Register */ +#define SPI1_CLK 0xFFC40510 /* SPI1 Clock Rate Register */ +#define SPI1_DLY 0xFFC40514 /* SPI1 Delay Register */ +#define SPI1_SLVSEL 0xFFC40518 /* SPI1 Slave Select Register */ +#define SPI1_RWC 0xFFC4051C /* SPI1 Received Word-Count Register */ +#define SPI1_RWCR 0xFFC40520 /* SPI1 Received Word-Count Reload Register */ +#define SPI1_TWC 0xFFC40524 /* SPI1 Transmitted Word-Count Register */ +#define SPI1_TWCR 0xFFC40528 /* SPI1 Transmitted Word-Count Reload Register */ +#define SPI1_IMSK 0xFFC40530 /* SPI1 Interrupt Mask Register */ +#define SPI1_IMSK_CLR 0xFFC40534 /* SPI1 Interrupt Mask Clear Register */ +#define SPI1_IMSK_SET 0xFFC40538 /* SPI1 Interrupt Mask Set Register */ +#define SPI1_STAT 0xFFC40540 /* SPI1 Status Register */ +#define SPI1_ILAT 0xFFC40544 /* SPI1 Masked Interrupt Condition Register */ +#define SPI1_ILAT_CLR 0xFFC40548 /* SPI1 Masked Interrupt Clear Register */ +#define SPI1_RFIFO 0xFFC40550 /* SPI1 Receive FIFO Data Register */ +#define SPI1_TFIFO 0xFFC40558 /* SPI1 Transmit FIFO Data Register */ +#define DMA0_DSCPTR_NXT 0xFFC41000 /* DMA0 Pointer to Next Initial Descriptor */ +#define DMA0_ADDRSTART 0xFFC41004 /* DMA0 Start Address of Current Buffer */ +#define DMA0_CFG 0xFFC41008 /* DMA0 Configuration Register */ +#define DMA0_XCNT 0xFFC4100C /* DMA0 Inner Loop Count Start Value */ +#define DMA0_XMOD 0xFFC41010 /* DMA0 Inner Loop Address Increment */ +#define DMA0_YCNT 0xFFC41014 /* DMA0 Outer Loop Count Start Value (2D only) */ +#define DMA0_YMOD 0xFFC41018 /* DMA0 Outer Loop Address Increment (2D only) */ +#define DMA0_DSCPTR_CUR 0xFFC41024 /* DMA0 Current Descriptor Pointer */ +#define DMA0_DSCPTR_PRV 0xFFC41028 /* DMA0 Previous Initial Descriptor Pointer */ +#define DMA0_ADDR_CUR 0xFFC4102C /* DMA0 Current Address */ +#define DMA0_STAT 0xFFC41030 /* DMA0 Status Register */ +#define DMA0_XCNT_CUR 0xFFC41034 /* DMA0 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA0_YCNT_CUR 0xFFC41038 /* DMA0 Current Row Count (2D only) */ +#define DMA0_BWLCNT 0xFFC41040 /* DMA0 Bandwidth Limit Count */ +#define DMA0_BWLCNT_CUR 0xFFC41044 /* DMA0 Bandwidth Limit Count Current */ +#define DMA0_BWMCNT 0xFFC41048 /* DMA0 Bandwidth Monitor Count */ +#define DMA0_BWMCNT_CUR 0xFFC4104C /* DMA0 Bandwidth Monitor Count Current */ +#define DMA1_DSCPTR_NXT 0xFFC41080 /* DMA1 Pointer to Next Initial Descriptor */ +#define DMA1_ADDRSTART 0xFFC41084 /* DMA1 Start Address of Current Buffer */ +#define DMA1_CFG 0xFFC41088 /* DMA1 Configuration Register */ +#define DMA1_XCNT 0xFFC4108C /* DMA1 Inner Loop Count Start Value */ +#define DMA1_XMOD 0xFFC41090 /* DMA1 Inner Loop Address Increment */ +#define DMA1_YCNT 0xFFC41094 /* DMA1 Outer Loop Count Start Value (2D only) */ +#define DMA1_YMOD 0xFFC41098 /* DMA1 Outer Loop Address Increment (2D only) */ +#define DMA1_DSCPTR_CUR 0xFFC410A4 /* DMA1 Current Descriptor Pointer */ +#define DMA1_DSCPTR_PRV 0xFFC410A8 /* DMA1 Previous Initial Descriptor Pointer */ +#define DMA1_ADDR_CUR 0xFFC410AC /* DMA1 Current Address */ +#define DMA1_STAT 0xFFC410B0 /* DMA1 Status Register */ +#define DMA1_XCNT_CUR 0xFFC410B4 /* DMA1 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA1_YCNT_CUR 0xFFC410B8 /* DMA1 Current Row Count (2D only) */ +#define DMA1_BWLCNT 0xFFC410C0 /* DMA1 Bandwidth Limit Count */ +#define DMA1_BWLCNT_CUR 0xFFC410C4 /* DMA1 Bandwidth Limit Count Current */ +#define DMA1_BWMCNT 0xFFC410C8 /* DMA1 Bandwidth Monitor Count */ +#define DMA1_BWMCNT_CUR 0xFFC410CC /* DMA1 Bandwidth Monitor Count Current */ +#define DMA2_DSCPTR_NXT 0xFFC41100 /* DMA2 Pointer to Next Initial Descriptor */ +#define DMA2_ADDRSTART 0xFFC41104 /* DMA2 Start Address of Current Buffer */ +#define DMA2_CFG 0xFFC41108 /* DMA2 Configuration Register */ +#define DMA2_XCNT 0xFFC4110C /* DMA2 Inner Loop Count Start Value */ +#define DMA2_XMOD 0xFFC41110 /* DMA2 Inner Loop Address Increment */ +#define DMA2_YCNT 0xFFC41114 /* DMA2 Outer Loop Count Start Value (2D only) */ +#define DMA2_YMOD 0xFFC41118 /* DMA2 Outer Loop Address Increment (2D only) */ +#define DMA2_DSCPTR_CUR 0xFFC41124 /* DMA2 Current Descriptor Pointer */ +#define DMA2_DSCPTR_PRV 0xFFC41128 /* DMA2 Previous Initial Descriptor Pointer */ +#define DMA2_ADDR_CUR 0xFFC4112C /* DMA2 Current Address */ +#define DMA2_STAT 0xFFC41130 /* DMA2 Status Register */ +#define DMA2_XCNT_CUR 0xFFC41134 /* DMA2 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA2_YCNT_CUR 0xFFC41138 /* DMA2 Current Row Count (2D only) */ +#define DMA2_BWLCNT 0xFFC41140 /* DMA2 Bandwidth Limit Count */ +#define DMA2_BWLCNT_CUR 0xFFC41144 /* DMA2 Bandwidth Limit Count Current */ +#define DMA2_BWMCNT 0xFFC41148 /* DMA2 Bandwidth Monitor Count */ +#define DMA2_BWMCNT_CUR 0xFFC4114C /* DMA2 Bandwidth Monitor Count Current */ +#define DMA3_DSCPTR_NXT 0xFFC41180 /* DMA3 Pointer to Next Initial Descriptor */ +#define DMA3_ADDRSTART 0xFFC41184 /* DMA3 Start Address of Current Buffer */ +#define DMA3_CFG 0xFFC41188 /* DMA3 Configuration Register */ +#define DMA3_XCNT 0xFFC4118C /* DMA3 Inner Loop Count Start Value */ +#define DMA3_XMOD 0xFFC41190 /* DMA3 Inner Loop Address Increment */ +#define DMA3_YCNT 0xFFC41194 /* DMA3 Outer Loop Count Start Value (2D only) */ +#define DMA3_YMOD 0xFFC41198 /* DMA3 Outer Loop Address Increment (2D only) */ +#define DMA3_DSCPTR_CUR 0xFFC411A4 /* DMA3 Current Descriptor Pointer */ +#define DMA3_DSCPTR_PRV 0xFFC411A8 /* DMA3 Previous Initial Descriptor Pointer */ +#define DMA3_ADDR_CUR 0xFFC411AC /* DMA3 Current Address */ +#define DMA3_STAT 0xFFC411B0 /* DMA3 Status Register */ +#define DMA3_XCNT_CUR 0xFFC411B4 /* DMA3 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA3_YCNT_CUR 0xFFC411B8 /* DMA3 Current Row Count (2D only) */ +#define DMA3_BWLCNT 0xFFC411C0 /* DMA3 Bandwidth Limit Count */ +#define DMA3_BWLCNT_CUR 0xFFC411C4 /* DMA3 Bandwidth Limit Count Current */ +#define DMA3_BWMCNT 0xFFC411C8 /* DMA3 Bandwidth Monitor Count */ +#define DMA3_BWMCNT_CUR 0xFFC411CC /* DMA3 Bandwidth Monitor Count Current */ +#define DMA4_DSCPTR_NXT 0xFFC41200 /* DMA4 Pointer to Next Initial Descriptor */ +#define DMA4_ADDRSTART 0xFFC41204 /* DMA4 Start Address of Current Buffer */ +#define DMA4_CFG 0xFFC41208 /* DMA4 Configuration Register */ +#define DMA4_XCNT 0xFFC4120C /* DMA4 Inner Loop Count Start Value */ +#define DMA4_XMOD 0xFFC41210 /* DMA4 Inner Loop Address Increment */ +#define DMA4_YCNT 0xFFC41214 /* DMA4 Outer Loop Count Start Value (2D only) */ +#define DMA4_YMOD 0xFFC41218 /* DMA4 Outer Loop Address Increment (2D only) */ +#define DMA4_DSCPTR_CUR 0xFFC41224 /* DMA4 Current Descriptor Pointer */ +#define DMA4_DSCPTR_PRV 0xFFC41228 /* DMA4 Previous Initial Descriptor Pointer */ +#define DMA4_ADDR_CUR 0xFFC4122C /* DMA4 Current Address */ +#define DMA4_STAT 0xFFC41230 /* DMA4 Status Register */ +#define DMA4_XCNT_CUR 0xFFC41234 /* DMA4 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA4_YCNT_CUR 0xFFC41238 /* DMA4 Current Row Count (2D only) */ +#define DMA4_BWLCNT 0xFFC41240 /* DMA4 Bandwidth Limit Count */ +#define DMA4_BWLCNT_CUR 0xFFC41244 /* DMA4 Bandwidth Limit Count Current */ +#define DMA4_BWMCNT 0xFFC41248 /* DMA4 Bandwidth Monitor Count */ +#define DMA4_BWMCNT_CUR 0xFFC4124C /* DMA4 Bandwidth Monitor Count Current */ +#define DMA5_DSCPTR_NXT 0xFFC41280 /* DMA5 Pointer to Next Initial Descriptor */ +#define DMA5_ADDRSTART 0xFFC41284 /* DMA5 Start Address of Current Buffer */ +#define DMA5_CFG 0xFFC41288 /* DMA5 Configuration Register */ +#define DMA5_XCNT 0xFFC4128C /* DMA5 Inner Loop Count Start Value */ +#define DMA5_XMOD 0xFFC41290 /* DMA5 Inner Loop Address Increment */ +#define DMA5_YCNT 0xFFC41294 /* DMA5 Outer Loop Count Start Value (2D only) */ +#define DMA5_YMOD 0xFFC41298 /* DMA5 Outer Loop Address Increment (2D only) */ +#define DMA5_DSCPTR_CUR 0xFFC412A4 /* DMA5 Current Descriptor Pointer */ +#define DMA5_DSCPTR_PRV 0xFFC412A8 /* DMA5 Previous Initial Descriptor Pointer */ +#define DMA5_ADDR_CUR 0xFFC412AC /* DMA5 Current Address */ +#define DMA5_STAT 0xFFC412B0 /* DMA5 Status Register */ +#define DMA5_XCNT_CUR 0xFFC412B4 /* DMA5 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA5_YCNT_CUR 0xFFC412B8 /* DMA5 Current Row Count (2D only) */ +#define DMA5_BWLCNT 0xFFC412C0 /* DMA5 Bandwidth Limit Count */ +#define DMA5_BWLCNT_CUR 0xFFC412C4 /* DMA5 Bandwidth Limit Count Current */ +#define DMA5_BWMCNT 0xFFC412C8 /* DMA5 Bandwidth Monitor Count */ +#define DMA5_BWMCNT_CUR 0xFFC412CC /* DMA5 Bandwidth Monitor Count Current */ +#define DMA6_DSCPTR_NXT 0xFFC41300 /* DMA6 Pointer to Next Initial Descriptor */ +#define DMA6_ADDRSTART 0xFFC41304 /* DMA6 Start Address of Current Buffer */ +#define DMA6_CFG 0xFFC41308 /* DMA6 Configuration Register */ +#define DMA6_XCNT 0xFFC4130C /* DMA6 Inner Loop Count Start Value */ +#define DMA6_XMOD 0xFFC41310 /* DMA6 Inner Loop Address Increment */ +#define DMA6_YCNT 0xFFC41314 /* DMA6 Outer Loop Count Start Value (2D only) */ +#define DMA6_YMOD 0xFFC41318 /* DMA6 Outer Loop Address Increment (2D only) */ +#define DMA6_DSCPTR_CUR 0xFFC41324 /* DMA6 Current Descriptor Pointer */ +#define DMA6_DSCPTR_PRV 0xFFC41328 /* DMA6 Previous Initial Descriptor Pointer */ +#define DMA6_ADDR_CUR 0xFFC4132C /* DMA6 Current Address */ +#define DMA6_STAT 0xFFC41330 /* DMA6 Status Register */ +#define DMA6_XCNT_CUR 0xFFC41334 /* DMA6 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA6_YCNT_CUR 0xFFC41338 /* DMA6 Current Row Count (2D only) */ +#define DMA6_BWLCNT 0xFFC41340 /* DMA6 Bandwidth Limit Count */ +#define DMA6_BWLCNT_CUR 0xFFC41344 /* DMA6 Bandwidth Limit Count Current */ +#define DMA6_BWMCNT 0xFFC41348 /* DMA6 Bandwidth Monitor Count */ +#define DMA6_BWMCNT_CUR 0xFFC4134C /* DMA6 Bandwidth Monitor Count Current */ +#define DMA7_DSCPTR_NXT 0xFFC41380 /* DMA7 Pointer to Next Initial Descriptor */ +#define DMA7_ADDRSTART 0xFFC41384 /* DMA7 Start Address of Current Buffer */ +#define DMA7_CFG 0xFFC41388 /* DMA7 Configuration Register */ +#define DMA7_XCNT 0xFFC4138C /* DMA7 Inner Loop Count Start Value */ +#define DMA7_XMOD 0xFFC41390 /* DMA7 Inner Loop Address Increment */ +#define DMA7_YCNT 0xFFC41394 /* DMA7 Outer Loop Count Start Value (2D only) */ +#define DMA7_YMOD 0xFFC41398 /* DMA7 Outer Loop Address Increment (2D only) */ +#define DMA7_DSCPTR_CUR 0xFFC413A4 /* DMA7 Current Descriptor Pointer */ +#define DMA7_DSCPTR_PRV 0xFFC413A8 /* DMA7 Previous Initial Descriptor Pointer */ +#define DMA7_ADDR_CUR 0xFFC413AC /* DMA7 Current Address */ +#define DMA7_STAT 0xFFC413B0 /* DMA7 Status Register */ +#define DMA7_XCNT_CUR 0xFFC413B4 /* DMA7 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA7_YCNT_CUR 0xFFC413B8 /* DMA7 Current Row Count (2D only) */ +#define DMA7_BWLCNT 0xFFC413C0 /* DMA7 Bandwidth Limit Count */ +#define DMA7_BWLCNT_CUR 0xFFC413C4 /* DMA7 Bandwidth Limit Count Current */ +#define DMA7_BWMCNT 0xFFC413C8 /* DMA7 Bandwidth Monitor Count */ +#define DMA7_BWMCNT_CUR 0xFFC413CC /* DMA7 Bandwidth Monitor Count Current */ +#define DMA8_DSCPTR_NXT 0xFFC41400 /* DMA8 Pointer to Next Initial Descriptor */ +#define DMA8_ADDRSTART 0xFFC41404 /* DMA8 Start Address of Current Buffer */ +#define DMA8_CFG 0xFFC41408 /* DMA8 Configuration Register */ +#define DMA8_XCNT 0xFFC4140C /* DMA8 Inner Loop Count Start Value */ +#define DMA8_XMOD 0xFFC41410 /* DMA8 Inner Loop Address Increment */ +#define DMA8_YCNT 0xFFC41414 /* DMA8 Outer Loop Count Start Value (2D only) */ +#define DMA8_YMOD 0xFFC41418 /* DMA8 Outer Loop Address Increment (2D only) */ +#define DMA8_DSCPTR_CUR 0xFFC41424 /* DMA8 Current Descriptor Pointer */ +#define DMA8_DSCPTR_PRV 0xFFC41428 /* DMA8 Previous Initial Descriptor Pointer */ +#define DMA8_ADDR_CUR 0xFFC4142C /* DMA8 Current Address */ +#define DMA8_STAT 0xFFC41430 /* DMA8 Status Register */ +#define DMA8_XCNT_CUR 0xFFC41434 /* DMA8 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA8_YCNT_CUR 0xFFC41438 /* DMA8 Current Row Count (2D only) */ +#define DMA8_BWLCNT 0xFFC41440 /* DMA8 Bandwidth Limit Count */ +#define DMA8_BWLCNT_CUR 0xFFC41444 /* DMA8 Bandwidth Limit Count Current */ +#define DMA8_BWMCNT 0xFFC41448 /* DMA8 Bandwidth Monitor Count */ +#define DMA8_BWMCNT_CUR 0xFFC4144C /* DMA8 Bandwidth Monitor Count Current */ +#define DMA9_DSCPTR_NXT 0xFFC41480 /* DMA9 Pointer to Next Initial Descriptor */ +#define DMA9_ADDRSTART 0xFFC41484 /* DMA9 Start Address of Current Buffer */ +#define DMA9_CFG 0xFFC41488 /* DMA9 Configuration Register */ +#define DMA9_XCNT 0xFFC4148C /* DMA9 Inner Loop Count Start Value */ +#define DMA9_XMOD 0xFFC41490 /* DMA9 Inner Loop Address Increment */ +#define DMA9_YCNT 0xFFC41494 /* DMA9 Outer Loop Count Start Value (2D only) */ +#define DMA9_YMOD 0xFFC41498 /* DMA9 Outer Loop Address Increment (2D only) */ +#define DMA9_DSCPTR_CUR 0xFFC414A4 /* DMA9 Current Descriptor Pointer */ +#define DMA9_DSCPTR_PRV 0xFFC414A8 /* DMA9 Previous Initial Descriptor Pointer */ +#define DMA9_ADDR_CUR 0xFFC414AC /* DMA9 Current Address */ +#define DMA9_STAT 0xFFC414B0 /* DMA9 Status Register */ +#define DMA9_XCNT_CUR 0xFFC414B4 /* DMA9 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA9_YCNT_CUR 0xFFC414B8 /* DMA9 Current Row Count (2D only) */ +#define DMA9_BWLCNT 0xFFC414C0 /* DMA9 Bandwidth Limit Count */ +#define DMA9_BWLCNT_CUR 0xFFC414C4 /* DMA9 Bandwidth Limit Count Current */ +#define DMA9_BWMCNT 0xFFC414C8 /* DMA9 Bandwidth Monitor Count */ +#define DMA9_BWMCNT_CUR 0xFFC414CC /* DMA9 Bandwidth Monitor Count Current */ +#define DMA10_DSCPTR_NXT 0xFFC05000 /* DMA10 Pointer to Next Initial Descriptor */ +#define DMA10_ADDRSTART 0xFFC05004 /* DMA10 Start Address of Current Buffer */ +#define DMA10_CFG 0xFFC05008 /* DMA10 Configuration Register */ +#define DMA10_XCNT 0xFFC0500C /* DMA10 Inner Loop Count Start Value */ +#define DMA10_XMOD 0xFFC05010 /* DMA10 Inner Loop Address Increment */ +#define DMA10_YCNT 0xFFC05014 /* DMA10 Outer Loop Count Start Value (2D only) */ +#define DMA10_YMOD 0xFFC05018 /* DMA10 Outer Loop Address Increment (2D only) */ +#define DMA10_DSCPTR_CUR 0xFFC05024 /* DMA10 Current Descriptor Pointer */ +#define DMA10_DSCPTR_PRV 0xFFC05028 /* DMA10 Previous Initial Descriptor Pointer */ +#define DMA10_ADDR_CUR 0xFFC0502C /* DMA10 Current Address */ +#define DMA10_STAT 0xFFC05030 /* DMA10 Status Register */ +#define DMA10_XCNT_CUR 0xFFC05034 /* DMA10 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA10_YCNT_CUR 0xFFC05038 /* DMA10 Current Row Count (2D only) */ +#define DMA10_BWLCNT 0xFFC05040 /* DMA10 Bandwidth Limit Count */ +#define DMA10_BWLCNT_CUR 0xFFC05044 /* DMA10 Bandwidth Limit Count Current */ +#define DMA10_BWMCNT 0xFFC05048 /* DMA10 Bandwidth Monitor Count */ +#define DMA10_BWMCNT_CUR 0xFFC0504C /* DMA10 Bandwidth Monitor Count Current */ +#define DMA11_DSCPTR_NXT 0xFFC05080 /* DMA11 Pointer to Next Initial Descriptor */ +#define DMA11_ADDRSTART 0xFFC05084 /* DMA11 Start Address of Current Buffer */ +#define DMA11_CFG 0xFFC05088 /* DMA11 Configuration Register */ +#define DMA11_XCNT 0xFFC0508C /* DMA11 Inner Loop Count Start Value */ +#define DMA11_XMOD 0xFFC05090 /* DMA11 Inner Loop Address Increment */ +#define DMA11_YCNT 0xFFC05094 /* DMA11 Outer Loop Count Start Value (2D only) */ +#define DMA11_YMOD 0xFFC05098 /* DMA11 Outer Loop Address Increment (2D only) */ +#define DMA11_DSCPTR_CUR 0xFFC050A4 /* DMA11 Current Descriptor Pointer */ +#define DMA11_DSCPTR_PRV 0xFFC050A8 /* DMA11 Previous Initial Descriptor Pointer */ +#define DMA11_ADDR_CUR 0xFFC050AC /* DMA11 Current Address */ +#define DMA11_STAT 0xFFC050B0 /* DMA11 Status Register */ +#define DMA11_XCNT_CUR 0xFFC050B4 /* DMA11 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA11_YCNT_CUR 0xFFC050B8 /* DMA11 Current Row Count (2D only) */ +#define DMA11_BWLCNT 0xFFC050C0 /* DMA11 Bandwidth Limit Count */ +#define DMA11_BWLCNT_CUR 0xFFC050C4 /* DMA11 Bandwidth Limit Count Current */ +#define DMA11_BWMCNT 0xFFC050C8 /* DMA11 Bandwidth Monitor Count */ +#define DMA11_BWMCNT_CUR 0xFFC050CC /* DMA11 Bandwidth Monitor Count Current */ +#define DMA12_DSCPTR_NXT 0xFFC05100 /* DMA12 Pointer to Next Initial Descriptor */ +#define DMA12_ADDRSTART 0xFFC05104 /* DMA12 Start Address of Current Buffer */ +#define DMA12_CFG 0xFFC05108 /* DMA12 Configuration Register */ +#define DMA12_XCNT 0xFFC0510C /* DMA12 Inner Loop Count Start Value */ +#define DMA12_XMOD 0xFFC05110 /* DMA12 Inner Loop Address Increment */ +#define DMA12_YCNT 0xFFC05114 /* DMA12 Outer Loop Count Start Value (2D only) */ +#define DMA12_YMOD 0xFFC05118 /* DMA12 Outer Loop Address Increment (2D only) */ +#define DMA12_DSCPTR_CUR 0xFFC05124 /* DMA12 Current Descriptor Pointer */ +#define DMA12_DSCPTR_PRV 0xFFC05128 /* DMA12 Previous Initial Descriptor Pointer */ +#define DMA12_ADDR_CUR 0xFFC0512C /* DMA12 Current Address */ +#define DMA12_STAT 0xFFC05130 /* DMA12 Status Register */ +#define DMA12_XCNT_CUR 0xFFC05134 /* DMA12 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA12_YCNT_CUR 0xFFC05138 /* DMA12 Current Row Count (2D only) */ +#define DMA12_BWLCNT 0xFFC05140 /* DMA12 Bandwidth Limit Count */ +#define DMA12_BWLCNT_CUR 0xFFC05144 /* DMA12 Bandwidth Limit Count Current */ +#define DMA12_BWMCNT 0xFFC05148 /* DMA12 Bandwidth Monitor Count */ +#define DMA12_BWMCNT_CUR 0xFFC0514C /* DMA12 Bandwidth Monitor Count Current */ +#define DMA13_DSCPTR_NXT 0xFFC07000 /* DMA13 Pointer to Next Initial Descriptor */ +#define DMA13_ADDRSTART 0xFFC07004 /* DMA13 Start Address of Current Buffer */ +#define DMA13_CFG 0xFFC07008 /* DMA13 Configuration Register */ +#define DMA13_XCNT 0xFFC0700C /* DMA13 Inner Loop Count Start Value */ +#define DMA13_XMOD 0xFFC07010 /* DMA13 Inner Loop Address Increment */ +#define DMA13_YCNT 0xFFC07014 /* DMA13 Outer Loop Count Start Value (2D only) */ +#define DMA13_YMOD 0xFFC07018 /* DMA13 Outer Loop Address Increment (2D only) */ +#define DMA13_DSCPTR_CUR 0xFFC07024 /* DMA13 Current Descriptor Pointer */ +#define DMA13_DSCPTR_PRV 0xFFC07028 /* DMA13 Previous Initial Descriptor Pointer */ +#define DMA13_ADDR_CUR 0xFFC0702C /* DMA13 Current Address */ +#define DMA13_STAT 0xFFC07030 /* DMA13 Status Register */ +#define DMA13_XCNT_CUR 0xFFC07034 /* DMA13 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA13_YCNT_CUR 0xFFC07038 /* DMA13 Current Row Count (2D only) */ +#define DMA13_BWLCNT 0xFFC07040 /* DMA13 Bandwidth Limit Count */ +#define DMA13_BWLCNT_CUR 0xFFC07044 /* DMA13 Bandwidth Limit Count Current */ +#define DMA13_BWMCNT 0xFFC07048 /* DMA13 Bandwidth Monitor Count */ +#define DMA13_BWMCNT_CUR 0xFFC0704C /* DMA13 Bandwidth Monitor Count Current */ +#define DMA14_DSCPTR_NXT 0xFFC07080 /* DMA14 Pointer to Next Initial Descriptor */ +#define DMA14_ADDRSTART 0xFFC07084 /* DMA14 Start Address of Current Buffer */ +#define DMA14_CFG 0xFFC07088 /* DMA14 Configuration Register */ +#define DMA14_XCNT 0xFFC0708C /* DMA14 Inner Loop Count Start Value */ +#define DMA14_XMOD 0xFFC07090 /* DMA14 Inner Loop Address Increment */ +#define DMA14_YCNT 0xFFC07094 /* DMA14 Outer Loop Count Start Value (2D only) */ +#define DMA14_YMOD 0xFFC07098 /* DMA14 Outer Loop Address Increment (2D only) */ +#define DMA14_DSCPTR_CUR 0xFFC070A4 /* DMA14 Current Descriptor Pointer */ +#define DMA14_DSCPTR_PRV 0xFFC070A8 /* DMA14 Previous Initial Descriptor Pointer */ +#define DMA14_ADDR_CUR 0xFFC070AC /* DMA14 Current Address */ +#define DMA14_STAT 0xFFC070B0 /* DMA14 Status Register */ +#define DMA14_XCNT_CUR 0xFFC070B4 /* DMA14 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA14_YCNT_CUR 0xFFC070B8 /* DMA14 Current Row Count (2D only) */ +#define DMA14_BWLCNT 0xFFC070C0 /* DMA14 Bandwidth Limit Count */ +#define DMA14_BWLCNT_CUR 0xFFC070C4 /* DMA14 Bandwidth Limit Count Current */ +#define DMA14_BWMCNT 0xFFC070C8 /* DMA14 Bandwidth Monitor Count */ +#define DMA14_BWMCNT_CUR 0xFFC070CC /* DMA14 Bandwidth Monitor Count Current */ +#define DMA15_DSCPTR_NXT 0xFFC07100 /* DMA15 Pointer to Next Initial Descriptor */ +#define DMA15_ADDRSTART 0xFFC07104 /* DMA15 Start Address of Current Buffer */ +#define DMA15_CFG 0xFFC07108 /* DMA15 Configuration Register */ +#define DMA15_XCNT 0xFFC0710C /* DMA15 Inner Loop Count Start Value */ +#define DMA15_XMOD 0xFFC07110 /* DMA15 Inner Loop Address Increment */ +#define DMA15_YCNT 0xFFC07114 /* DMA15 Outer Loop Count Start Value (2D only) */ +#define DMA15_YMOD 0xFFC07118 /* DMA15 Outer Loop Address Increment (2D only) */ +#define DMA15_DSCPTR_CUR 0xFFC07124 /* DMA15 Current Descriptor Pointer */ +#define DMA15_DSCPTR_PRV 0xFFC07128 /* DMA15 Previous Initial Descriptor Pointer */ +#define DMA15_ADDR_CUR 0xFFC0712C /* DMA15 Current Address */ +#define DMA15_STAT 0xFFC07130 /* DMA15 Status Register */ +#define DMA15_XCNT_CUR 0xFFC07134 /* DMA15 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA15_YCNT_CUR 0xFFC07138 /* DMA15 Current Row Count (2D only) */ +#define DMA15_BWLCNT 0xFFC07140 /* DMA15 Bandwidth Limit Count */ +#define DMA15_BWLCNT_CUR 0xFFC07144 /* DMA15 Bandwidth Limit Count Current */ +#define DMA15_BWMCNT 0xFFC07148 /* DMA15 Bandwidth Monitor Count */ +#define DMA15_BWMCNT_CUR 0xFFC0714C /* DMA15 Bandwidth Monitor Count Current */ +#define DMA16_DSCPTR_NXT 0xFFC07180 /* DMA16 Pointer to Next Initial Descriptor */ +#define DMA16_ADDRSTART 0xFFC07184 /* DMA16 Start Address of Current Buffer */ +#define DMA16_CFG 0xFFC07188 /* DMA16 Configuration Register */ +#define DMA16_XCNT 0xFFC0718C /* DMA16 Inner Loop Count Start Value */ +#define DMA16_XMOD 0xFFC07190 /* DMA16 Inner Loop Address Increment */ +#define DMA16_YCNT 0xFFC07194 /* DMA16 Outer Loop Count Start Value (2D only) */ +#define DMA16_YMOD 0xFFC07198 /* DMA16 Outer Loop Address Increment (2D only) */ +#define DMA16_DSCPTR_CUR 0xFFC071A4 /* DMA16 Current Descriptor Pointer */ +#define DMA16_DSCPTR_PRV 0xFFC071A8 /* DMA16 Previous Initial Descriptor Pointer */ +#define DMA16_ADDR_CUR 0xFFC071AC /* DMA16 Current Address */ +#define DMA16_STAT 0xFFC071B0 /* DMA16 Status Register */ +#define DMA16_XCNT_CUR 0xFFC071B4 /* DMA16 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA16_YCNT_CUR 0xFFC071B8 /* DMA16 Current Row Count (2D only) */ +#define DMA16_BWLCNT 0xFFC071C0 /* DMA16 Bandwidth Limit Count */ +#define DMA16_BWLCNT_CUR 0xFFC071C4 /* DMA16 Bandwidth Limit Count Current */ +#define DMA16_BWMCNT 0xFFC071C8 /* DMA16 Bandwidth Monitor Count */ +#define DMA16_BWMCNT_CUR 0xFFC071CC /* DMA16 Bandwidth Monitor Count Current */ +#define DMA17_DSCPTR_NXT 0xFFC07200 /* DMA17 Pointer to Next Initial Descriptor */ +#define DMA17_ADDRSTART 0xFFC07204 /* DMA17 Start Address of Current Buffer */ +#define DMA17_CFG 0xFFC07208 /* DMA17 Configuration Register */ +#define DMA17_XCNT 0xFFC0720C /* DMA17 Inner Loop Count Start Value */ +#define DMA17_XMOD 0xFFC07210 /* DMA17 Inner Loop Address Increment */ +#define DMA17_YCNT 0xFFC07214 /* DMA17 Outer Loop Count Start Value (2D only) */ +#define DMA17_YMOD 0xFFC07218 /* DMA17 Outer Loop Address Increment (2D only) */ +#define DMA17_DSCPTR_CUR 0xFFC07224 /* DMA17 Current Descriptor Pointer */ +#define DMA17_DSCPTR_PRV 0xFFC07228 /* DMA17 Previous Initial Descriptor Pointer */ +#define DMA17_ADDR_CUR 0xFFC0722C /* DMA17 Current Address */ +#define DMA17_STAT 0xFFC07230 /* DMA17 Status Register */ +#define DMA17_XCNT_CUR 0xFFC07234 /* DMA17 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA17_YCNT_CUR 0xFFC07238 /* DMA17 Current Row Count (2D only) */ +#define DMA17_BWLCNT 0xFFC07240 /* DMA17 Bandwidth Limit Count */ +#define DMA17_BWLCNT_CUR 0xFFC07244 /* DMA17 Bandwidth Limit Count Current */ +#define DMA17_BWMCNT 0xFFC07248 /* DMA17 Bandwidth Monitor Count */ +#define DMA17_BWMCNT_CUR 0xFFC0724C /* DMA17 Bandwidth Monitor Count Current */ +#define DMA18_DSCPTR_NXT 0xFFC07280 /* DMA18 Pointer to Next Initial Descriptor */ +#define DMA18_ADDRSTART 0xFFC07284 /* DMA18 Start Address of Current Buffer */ +#define DMA18_CFG 0xFFC07288 /* DMA18 Configuration Register */ +#define DMA18_XCNT 0xFFC0728C /* DMA18 Inner Loop Count Start Value */ +#define DMA18_XMOD 0xFFC07290 /* DMA18 Inner Loop Address Increment */ +#define DMA18_YCNT 0xFFC07294 /* DMA18 Outer Loop Count Start Value (2D only) */ +#define DMA18_YMOD 0xFFC07298 /* DMA18 Outer Loop Address Increment (2D only) */ +#define DMA18_DSCPTR_CUR 0xFFC072A4 /* DMA18 Current Descriptor Pointer */ +#define DMA18_DSCPTR_PRV 0xFFC072A8 /* DMA18 Previous Initial Descriptor Pointer */ +#define DMA18_ADDR_CUR 0xFFC072AC /* DMA18 Current Address */ +#define DMA18_STAT 0xFFC072B0 /* DMA18 Status Register */ +#define DMA18_XCNT_CUR 0xFFC072B4 /* DMA18 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA18_YCNT_CUR 0xFFC072B8 /* DMA18 Current Row Count (2D only) */ +#define DMA18_BWLCNT 0xFFC072C0 /* DMA18 Bandwidth Limit Count */ +#define DMA18_BWLCNT_CUR 0xFFC072C4 /* DMA18 Bandwidth Limit Count Current */ +#define DMA18_BWMCNT 0xFFC072C8 /* DMA18 Bandwidth Monitor Count */ +#define DMA18_BWMCNT_CUR 0xFFC072CC /* DMA18 Bandwidth Monitor Count Current */ +#define DMA19_DSCPTR_NXT 0xFFC07300 /* DMA19 Pointer to Next Initial Descriptor */ +#define DMA19_ADDRSTART 0xFFC07304 /* DMA19 Start Address of Current Buffer */ +#define DMA19_CFG 0xFFC07308 /* DMA19 Configuration Register */ +#define DMA19_XCNT 0xFFC0730C /* DMA19 Inner Loop Count Start Value */ +#define DMA19_XMOD 0xFFC07310 /* DMA19 Inner Loop Address Increment */ +#define DMA19_YCNT 0xFFC07314 /* DMA19 Outer Loop Count Start Value (2D only) */ +#define DMA19_YMOD 0xFFC07318 /* DMA19 Outer Loop Address Increment (2D only) */ +#define DMA19_DSCPTR_CUR 0xFFC07324 /* DMA19 Current Descriptor Pointer */ +#define DMA19_DSCPTR_PRV 0xFFC07328 /* DMA19 Previous Initial Descriptor Pointer */ +#define DMA19_ADDR_CUR 0xFFC0732C /* DMA19 Current Address */ +#define DMA19_STAT 0xFFC07330 /* DMA19 Status Register */ +#define DMA19_XCNT_CUR 0xFFC07334 /* DMA19 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA19_YCNT_CUR 0xFFC07338 /* DMA19 Current Row Count (2D only) */ +#define DMA19_BWLCNT 0xFFC07340 /* DMA19 Bandwidth Limit Count */ +#define DMA19_BWLCNT_CUR 0xFFC07344 /* DMA19 Bandwidth Limit Count Current */ +#define DMA19_BWMCNT 0xFFC07348 /* DMA19 Bandwidth Monitor Count */ +#define DMA19_BWMCNT_CUR 0xFFC0734C /* DMA19 Bandwidth Monitor Count Current */ +#define DMA20_DSCPTR_NXT 0xFFC07380 /* DMA20 Pointer to Next Initial Descriptor */ +#define DMA20_ADDRSTART 0xFFC07384 /* DMA20 Start Address of Current Buffer */ +#define DMA20_CFG 0xFFC07388 /* DMA20 Configuration Register */ +#define DMA20_XCNT 0xFFC0738C /* DMA20 Inner Loop Count Start Value */ +#define DMA20_XMOD 0xFFC07390 /* DMA20 Inner Loop Address Increment */ +#define DMA20_YCNT 0xFFC07394 /* DMA20 Outer Loop Count Start Value (2D only) */ +#define DMA20_YMOD 0xFFC07398 /* DMA20 Outer Loop Address Increment (2D only) */ +#define DMA20_DSCPTR_CUR 0xFFC073A4 /* DMA20 Current Descriptor Pointer */ +#define DMA20_DSCPTR_PRV 0xFFC073A8 /* DMA20 Previous Initial Descriptor Pointer */ +#define DMA20_ADDR_CUR 0xFFC073AC /* DMA20 Current Address */ +#define DMA20_STAT 0xFFC073B0 /* DMA20 Status Register */ +#define DMA20_XCNT_CUR 0xFFC073B4 /* DMA20 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA20_YCNT_CUR 0xFFC073B8 /* DMA20 Current Row Count (2D only) */ +#define DMA20_BWLCNT 0xFFC073C0 /* DMA20 Bandwidth Limit Count */ +#define DMA20_BWLCNT_CUR 0xFFC073C4 /* DMA20 Bandwidth Limit Count Current */ +#define DMA20_BWMCNT 0xFFC073C8 /* DMA20 Bandwidth Monitor Count */ +#define DMA20_BWMCNT_CUR 0xFFC073CC /* DMA20 Bandwidth Monitor Count Current */ +#define MDMA_S0_NEXT_DESC_PTR DMA21_DSCPTR_NXT +#define DMA21_DSCPTR_NXT 0xFFC09000 /* DMA21 Pointer to Next Initial Descriptor */ +#define DMA21_ADDRSTART 0xFFC09004 /* DMA21 Start Address of Current Buffer */ +#define DMA21_CFG 0xFFC09008 /* DMA21 Configuration Register */ +#define DMA21_XCNT 0xFFC0900C /* DMA21 Inner Loop Count Start Value */ +#define DMA21_XMOD 0xFFC09010 /* DMA21 Inner Loop Address Increment */ +#define DMA21_YCNT 0xFFC09014 /* DMA21 Outer Loop Count Start Value (2D only) */ +#define DMA21_YMOD 0xFFC09018 /* DMA21 Outer Loop Address Increment (2D only) */ +#define DMA21_DSCPTR_CUR 0xFFC09024 /* DMA21 Current Descriptor Pointer */ +#define DMA21_DSCPTR_PRV 0xFFC09028 /* DMA21 Previous Initial Descriptor Pointer */ +#define DMA21_ADDR_CUR 0xFFC0902C /* DMA21 Current Address */ +#define DMA21_STAT 0xFFC09030 /* DMA21 Status Register */ +#define DMA21_XCNT_CUR 0xFFC09034 /* DMA21 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA21_YCNT_CUR 0xFFC09038 /* DMA21 Current Row Count (2D only) */ +#define DMA21_BWLCNT 0xFFC09040 /* DMA21 Bandwidth Limit Count */ +#define DMA21_BWLCNT_CUR 0xFFC09044 /* DMA21 Bandwidth Limit Count Current */ +#define DMA21_BWMCNT 0xFFC09048 /* DMA21 Bandwidth Monitor Count */ +#define DMA21_BWMCNT_CUR 0xFFC0904C /* DMA21 Bandwidth Monitor Count Current */ +#define MDMA_D0_NEXT_DESC_PTR DMA22_DSCPTR_NXT +#define DMA22_DSCPTR_NXT 0xFFC09080 /* DMA22 Pointer to Next Initial Descriptor */ +#define DMA22_ADDRSTART 0xFFC09084 /* DMA22 Start Address of Current Buffer */ +#define DMA22_CFG 0xFFC09088 /* DMA22 Configuration Register */ +#define DMA22_XCNT 0xFFC0908C /* DMA22 Inner Loop Count Start Value */ +#define DMA22_XMOD 0xFFC09090 /* DMA22 Inner Loop Address Increment */ +#define DMA22_YCNT 0xFFC09094 /* DMA22 Outer Loop Count Start Value (2D only) */ +#define DMA22_YMOD 0xFFC09098 /* DMA22 Outer Loop Address Increment (2D only) */ +#define DMA22_DSCPTR_CUR 0xFFC090A4 /* DMA22 Current Descriptor Pointer */ +#define DMA22_DSCPTR_PRV 0xFFC090A8 /* DMA22 Previous Initial Descriptor Pointer */ +#define DMA22_ADDR_CUR 0xFFC090AC /* DMA22 Current Address */ +#define DMA22_STAT 0xFFC090B0 /* DMA22 Status Register */ +#define DMA22_XCNT_CUR 0xFFC090B4 /* DMA22 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA22_YCNT_CUR 0xFFC090B8 /* DMA22 Current Row Count (2D only) */ +#define DMA22_BWLCNT 0xFFC090C0 /* DMA22 Bandwidth Limit Count */ +#define DMA22_BWLCNT_CUR 0xFFC090C4 /* DMA22 Bandwidth Limit Count Current */ +#define DMA22_BWMCNT 0xFFC090C8 /* DMA22 Bandwidth Monitor Count */ +#define DMA22_BWMCNT_CUR 0xFFC090CC /* DMA22 Bandwidth Monitor Count Current */ +#define DMA23_DSCPTR_NXT 0xFFC09100 /* DMA23 Pointer to Next Initial Descriptor */ +#define DMA23_ADDRSTART 0xFFC09104 /* DMA23 Start Address of Current Buffer */ +#define DMA23_CFG 0xFFC09108 /* DMA23 Configuration Register */ +#define DMA23_XCNT 0xFFC0910C /* DMA23 Inner Loop Count Start Value */ +#define DMA23_XMOD 0xFFC09110 /* DMA23 Inner Loop Address Increment */ +#define DMA23_YCNT 0xFFC09114 /* DMA23 Outer Loop Count Start Value (2D only) */ +#define DMA23_YMOD 0xFFC09118 /* DMA23 Outer Loop Address Increment (2D only) */ +#define DMA23_DSCPTR_CUR 0xFFC09124 /* DMA23 Current Descriptor Pointer */ +#define DMA23_DSCPTR_PRV 0xFFC09128 /* DMA23 Previous Initial Descriptor Pointer */ +#define DMA23_ADDR_CUR 0xFFC0912C /* DMA23 Current Address */ +#define DMA23_STAT 0xFFC09130 /* DMA23 Status Register */ +#define DMA23_XCNT_CUR 0xFFC09134 /* DMA23 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA23_YCNT_CUR 0xFFC09138 /* DMA23 Current Row Count (2D only) */ +#define DMA23_BWLCNT 0xFFC09140 /* DMA23 Bandwidth Limit Count */ +#define DMA23_BWLCNT_CUR 0xFFC09144 /* DMA23 Bandwidth Limit Count Current */ +#define DMA23_BWMCNT 0xFFC09148 /* DMA23 Bandwidth Monitor Count */ +#define DMA23_BWMCNT_CUR 0xFFC0914C /* DMA23 Bandwidth Monitor Count Current */ +#define DMA24_DSCPTR_NXT 0xFFC09180 /* DMA24 Pointer to Next Initial Descriptor */ +#define DMA24_ADDRSTART 0xFFC09184 /* DMA24 Start Address of Current Buffer */ +#define DMA24_CFG 0xFFC09188 /* DMA24 Configuration Register */ +#define DMA24_XCNT 0xFFC0918C /* DMA24 Inner Loop Count Start Value */ +#define DMA24_XMOD 0xFFC09190 /* DMA24 Inner Loop Address Increment */ +#define DMA24_YCNT 0xFFC09194 /* DMA24 Outer Loop Count Start Value (2D only) */ +#define DMA24_YMOD 0xFFC09198 /* DMA24 Outer Loop Address Increment (2D only) */ +#define DMA24_DSCPTR_CUR 0xFFC091A4 /* DMA24 Current Descriptor Pointer */ +#define DMA24_DSCPTR_PRV 0xFFC091A8 /* DMA24 Previous Initial Descriptor Pointer */ +#define DMA24_ADDR_CUR 0xFFC091AC /* DMA24 Current Address */ +#define DMA24_STAT 0xFFC091B0 /* DMA24 Status Register */ +#define DMA24_XCNT_CUR 0xFFC091B4 /* DMA24 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA24_YCNT_CUR 0xFFC091B8 /* DMA24 Current Row Count (2D only) */ +#define DMA24_BWLCNT 0xFFC091C0 /* DMA24 Bandwidth Limit Count */ +#define DMA24_BWLCNT_CUR 0xFFC091C4 /* DMA24 Bandwidth Limit Count Current */ +#define DMA24_BWMCNT 0xFFC091C8 /* DMA24 Bandwidth Monitor Count */ +#define DMA24_BWMCNT_CUR 0xFFC091CC /* DMA24 Bandwidth Monitor Count Current */ +#define DMA25_DSCPTR_NXT 0xFFC09200 /* DMA25 Pointer to Next Initial Descriptor */ +#define DMA25_ADDRSTART 0xFFC09204 /* DMA25 Start Address of Current Buffer */ +#define DMA25_CFG 0xFFC09208 /* DMA25 Configuration Register */ +#define DMA25_XCNT 0xFFC0920C /* DMA25 Inner Loop Count Start Value */ +#define DMA25_XMOD 0xFFC09210 /* DMA25 Inner Loop Address Increment */ +#define DMA25_YCNT 0xFFC09214 /* DMA25 Outer Loop Count Start Value (2D only) */ +#define DMA25_YMOD 0xFFC09218 /* DMA25 Outer Loop Address Increment (2D only) */ +#define DMA25_DSCPTR_CUR 0xFFC09224 /* DMA25 Current Descriptor Pointer */ +#define DMA25_DSCPTR_PRV 0xFFC09228 /* DMA25 Previous Initial Descriptor Pointer */ +#define DMA25_ADDR_CUR 0xFFC0922C /* DMA25 Current Address */ +#define DMA25_STAT 0xFFC09230 /* DMA25 Status Register */ +#define DMA25_XCNT_CUR 0xFFC09234 /* DMA25 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA25_YCNT_CUR 0xFFC09238 /* DMA25 Current Row Count (2D only) */ +#define DMA25_BWLCNT 0xFFC09240 /* DMA25 Bandwidth Limit Count */ +#define DMA25_BWLCNT_CUR 0xFFC09244 /* DMA25 Bandwidth Limit Count Current */ +#define DMA25_BWMCNT 0xFFC09248 /* DMA25 Bandwidth Monitor Count */ +#define DMA25_BWMCNT_CUR 0xFFC0924C /* DMA25 Bandwidth Monitor Count Current */ +#define DMA26_DSCPTR_NXT 0xFFC09280 /* DMA26 Pointer to Next Initial Descriptor */ +#define DMA26_ADDRSTART 0xFFC09284 /* DMA26 Start Address of Current Buffer */ +#define DMA26_CFG 0xFFC09288 /* DMA26 Configuration Register */ +#define DMA26_XCNT 0xFFC0928C /* DMA26 Inner Loop Count Start Value */ +#define DMA26_XMOD 0xFFC09290 /* DMA26 Inner Loop Address Increment */ +#define DMA26_YCNT 0xFFC09294 /* DMA26 Outer Loop Count Start Value (2D only) */ +#define DMA26_YMOD 0xFFC09298 /* DMA26 Outer Loop Address Increment (2D only) */ +#define DMA26_DSCPTR_CUR 0xFFC092A4 /* DMA26 Current Descriptor Pointer */ +#define DMA26_DSCPTR_PRV 0xFFC092A8 /* DMA26 Previous Initial Descriptor Pointer */ +#define DMA26_ADDR_CUR 0xFFC092AC /* DMA26 Current Address */ +#define DMA26_STAT 0xFFC092B0 /* DMA26 Status Register */ +#define DMA26_XCNT_CUR 0xFFC092B4 /* DMA26 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA26_YCNT_CUR 0xFFC092B8 /* DMA26 Current Row Count (2D only) */ +#define DMA26_BWLCNT 0xFFC092C0 /* DMA26 Bandwidth Limit Count */ +#define DMA26_BWLCNT_CUR 0xFFC092C4 /* DMA26 Bandwidth Limit Count Current */ +#define DMA26_BWMCNT 0xFFC092C8 /* DMA26 Bandwidth Monitor Count */ +#define DMA26_BWMCNT_CUR 0xFFC092CC /* DMA26 Bandwidth Monitor Count Current */ +#define DMA27_DSCPTR_NXT 0xFFC09300 /* DMA27 Pointer to Next Initial Descriptor */ +#define DMA27_ADDRSTART 0xFFC09304 /* DMA27 Start Address of Current Buffer */ +#define DMA27_CFG 0xFFC09308 /* DMA27 Configuration Register */ +#define DMA27_XCNT 0xFFC0930C /* DMA27 Inner Loop Count Start Value */ +#define DMA27_XMOD 0xFFC09310 /* DMA27 Inner Loop Address Increment */ +#define DMA27_YCNT 0xFFC09314 /* DMA27 Outer Loop Count Start Value (2D only) */ +#define DMA27_YMOD 0xFFC09318 /* DMA27 Outer Loop Address Increment (2D only) */ +#define DMA27_DSCPTR_CUR 0xFFC09324 /* DMA27 Current Descriptor Pointer */ +#define DMA27_DSCPTR_PRV 0xFFC09328 /* DMA27 Previous Initial Descriptor Pointer */ +#define DMA27_ADDR_CUR 0xFFC0932C /* DMA27 Current Address */ +#define DMA27_STAT 0xFFC09330 /* DMA27 Status Register */ +#define DMA27_XCNT_CUR 0xFFC09334 /* DMA27 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA27_YCNT_CUR 0xFFC09338 /* DMA27 Current Row Count (2D only) */ +#define DMA27_BWLCNT 0xFFC09340 /* DMA27 Bandwidth Limit Count */ +#define DMA27_BWLCNT_CUR 0xFFC09344 /* DMA27 Bandwidth Limit Count Current */ +#define DMA27_BWMCNT 0xFFC09348 /* DMA27 Bandwidth Monitor Count */ +#define DMA27_BWMCNT_CUR 0xFFC0934C /* DMA27 Bandwidth Monitor Count Current */ +#define DMA28_DSCPTR_NXT 0xFFC09380 /* DMA28 Pointer to Next Initial Descriptor */ +#define DMA28_ADDRSTART 0xFFC09384 /* DMA28 Start Address of Current Buffer */ +#define DMA28_CFG 0xFFC09388 /* DMA28 Configuration Register */ +#define DMA28_XCNT 0xFFC0938C /* DMA28 Inner Loop Count Start Value */ +#define DMA28_XMOD 0xFFC09390 /* DMA28 Inner Loop Address Increment */ +#define DMA28_YCNT 0xFFC09394 /* DMA28 Outer Loop Count Start Value (2D only) */ +#define DMA28_YMOD 0xFFC09398 /* DMA28 Outer Loop Address Increment (2D only) */ +#define DMA28_DSCPTR_CUR 0xFFC093A4 /* DMA28 Current Descriptor Pointer */ +#define DMA28_DSCPTR_PRV 0xFFC093A8 /* DMA28 Previous Initial Descriptor Pointer */ +#define DMA28_ADDR_CUR 0xFFC093AC /* DMA28 Current Address */ +#define DMA28_STAT 0xFFC093B0 /* DMA28 Status Register */ +#define DMA28_XCNT_CUR 0xFFC093B4 /* DMA28 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA28_YCNT_CUR 0xFFC093B8 /* DMA28 Current Row Count (2D only) */ +#define DMA28_BWLCNT 0xFFC093C0 /* DMA28 Bandwidth Limit Count */ +#define DMA28_BWLCNT_CUR 0xFFC093C4 /* DMA28 Bandwidth Limit Count Current */ +#define DMA28_BWMCNT 0xFFC093C8 /* DMA28 Bandwidth Monitor Count */ +#define DMA28_BWMCNT_CUR 0xFFC093CC /* DMA28 Bandwidth Monitor Count Current */ +#define DMA29_DSCPTR_NXT 0xFFC0B000 /* DMA29 Pointer to Next Initial Descriptor */ +#define DMA29_ADDRSTART 0xFFC0B004 /* DMA29 Start Address of Current Buffer */ +#define DMA29_CFG 0xFFC0B008 /* DMA29 Configuration Register */ +#define DMA29_XCNT 0xFFC0B00C /* DMA29 Inner Loop Count Start Value */ +#define DMA29_XMOD 0xFFC0B010 /* DMA29 Inner Loop Address Increment */ +#define DMA29_YCNT 0xFFC0B014 /* DMA29 Outer Loop Count Start Value (2D only) */ +#define DMA29_YMOD 0xFFC0B018 /* DMA29 Outer Loop Address Increment (2D only) */ +#define DMA29_DSCPTR_CUR 0xFFC0B024 /* DMA29 Current Descriptor Pointer */ +#define DMA29_DSCPTR_PRV 0xFFC0B028 /* DMA29 Previous Initial Descriptor Pointer */ +#define DMA29_ADDR_CUR 0xFFC0B02C /* DMA29 Current Address */ +#define DMA29_STAT 0xFFC0B030 /* DMA29 Status Register */ +#define DMA29_XCNT_CUR 0xFFC0B034 /* DMA29 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA29_YCNT_CUR 0xFFC0B038 /* DMA29 Current Row Count (2D only) */ +#define DMA29_BWLCNT 0xFFC0B040 /* DMA29 Bandwidth Limit Count */ +#define DMA29_BWLCNT_CUR 0xFFC0B044 /* DMA29 Bandwidth Limit Count Current */ +#define DMA29_BWMCNT 0xFFC0B048 /* DMA29 Bandwidth Monitor Count */ +#define DMA29_BWMCNT_CUR 0xFFC0B04C /* DMA29 Bandwidth Monitor Count Current */ +#define DMA30_DSCPTR_NXT 0xFFC0B080 /* DMA30 Pointer to Next Initial Descriptor */ +#define DMA30_ADDRSTART 0xFFC0B084 /* DMA30 Start Address of Current Buffer */ +#define DMA30_CFG 0xFFC0B088 /* DMA30 Configuration Register */ +#define DMA30_XCNT 0xFFC0B08C /* DMA30 Inner Loop Count Start Value */ +#define DMA30_XMOD 0xFFC0B090 /* DMA30 Inner Loop Address Increment */ +#define DMA30_YCNT 0xFFC0B094 /* DMA30 Outer Loop Count Start Value (2D only) */ +#define DMA30_YMOD 0xFFC0B098 /* DMA30 Outer Loop Address Increment (2D only) */ +#define DMA30_DSCPTR_CUR 0xFFC0B0A4 /* DMA30 Current Descriptor Pointer */ +#define DMA30_DSCPTR_PRV 0xFFC0B0A8 /* DMA30 Previous Initial Descriptor Pointer */ +#define DMA30_ADDR_CUR 0xFFC0B0AC /* DMA30 Current Address */ +#define DMA30_STAT 0xFFC0B0B0 /* DMA30 Status Register */ +#define DMA30_XCNT_CUR 0xFFC0B0B4 /* DMA30 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA30_YCNT_CUR 0xFFC0B0B8 /* DMA30 Current Row Count (2D only) */ +#define DMA30_BWLCNT 0xFFC0B0C0 /* DMA30 Bandwidth Limit Count */ +#define DMA30_BWLCNT_CUR 0xFFC0B0C4 /* DMA30 Bandwidth Limit Count Current */ +#define DMA30_BWMCNT 0xFFC0B0C8 /* DMA30 Bandwidth Monitor Count */ +#define DMA30_BWMCNT_CUR 0xFFC0B0CC /* DMA30 Bandwidth Monitor Count Current */ +#define DMA31_DSCPTR_NXT 0xFFC0B100 /* DMA31 Pointer to Next Initial Descriptor */ +#define DMA31_ADDRSTART 0xFFC0B104 /* DMA31 Start Address of Current Buffer */ +#define DMA31_CFG 0xFFC0B108 /* DMA31 Configuration Register */ +#define DMA31_XCNT 0xFFC0B10C /* DMA31 Inner Loop Count Start Value */ +#define DMA31_XMOD 0xFFC0B110 /* DMA31 Inner Loop Address Increment */ +#define DMA31_YCNT 0xFFC0B114 /* DMA31 Outer Loop Count Start Value (2D only) */ +#define DMA31_YMOD 0xFFC0B118 /* DMA31 Outer Loop Address Increment (2D only) */ +#define DMA31_DSCPTR_CUR 0xFFC0B124 /* DMA31 Current Descriptor Pointer */ +#define DMA31_DSCPTR_PRV 0xFFC0B128 /* DMA31 Previous Initial Descriptor Pointer */ +#define DMA31_ADDR_CUR 0xFFC0B12C /* DMA31 Current Address */ +#define DMA31_STAT 0xFFC0B130 /* DMA31 Status Register */ +#define DMA31_XCNT_CUR 0xFFC0B134 /* DMA31 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA31_YCNT_CUR 0xFFC0B138 /* DMA31 Current Row Count (2D only) */ +#define DMA31_BWLCNT 0xFFC0B140 /* DMA31 Bandwidth Limit Count */ +#define DMA31_BWLCNT_CUR 0xFFC0B144 /* DMA31 Bandwidth Limit Count Current */ +#define DMA31_BWMCNT 0xFFC0B148 /* DMA31 Bandwidth Monitor Count */ +#define DMA31_BWMCNT_CUR 0xFFC0B14C /* DMA31 Bandwidth Monitor Count Current */ +#define DMA32_DSCPTR_NXT 0xFFC0B180 /* DMA32 Pointer to Next Initial Descriptor */ +#define DMA32_ADDRSTART 0xFFC0B184 /* DMA32 Start Address of Current Buffer */ +#define DMA32_CFG 0xFFC0B188 /* DMA32 Configuration Register */ +#define DMA32_XCNT 0xFFC0B18C /* DMA32 Inner Loop Count Start Value */ +#define DMA32_XMOD 0xFFC0B190 /* DMA32 Inner Loop Address Increment */ +#define DMA32_YCNT 0xFFC0B194 /* DMA32 Outer Loop Count Start Value (2D only) */ +#define DMA32_YMOD 0xFFC0B198 /* DMA32 Outer Loop Address Increment (2D only) */ +#define DMA32_DSCPTR_CUR 0xFFC0B1A4 /* DMA32 Current Descriptor Pointer */ +#define DMA32_DSCPTR_PRV 0xFFC0B1A8 /* DMA32 Previous Initial Descriptor Pointer */ +#define DMA32_ADDR_CUR 0xFFC0B1AC /* DMA32 Current Address */ +#define DMA32_STAT 0xFFC0B1B0 /* DMA32 Status Register */ +#define DMA32_XCNT_CUR 0xFFC0B1B4 /* DMA32 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA32_YCNT_CUR 0xFFC0B1B8 /* DMA32 Current Row Count (2D only) */ +#define DMA32_BWLCNT 0xFFC0B1C0 /* DMA32 Bandwidth Limit Count */ +#define DMA32_BWLCNT_CUR 0xFFC0B1C4 /* DMA32 Bandwidth Limit Count Current */ +#define DMA32_BWMCNT 0xFFC0B1C8 /* DMA32 Bandwidth Monitor Count */ +#define DMA32_BWMCNT_CUR 0xFFC0B1CC /* DMA32 Bandwidth Monitor Count Current */ +#define DMA33_DSCPTR_NXT 0xFFC0D000 /* DMA33 Pointer to Next Initial Descriptor */ +#define DMA33_ADDRSTART 0xFFC0D004 /* DMA33 Start Address of Current Buffer */ +#define DMA33_CFG 0xFFC0D008 /* DMA33 Configuration Register */ +#define DMA33_XCNT 0xFFC0D00C /* DMA33 Inner Loop Count Start Value */ +#define DMA33_XMOD 0xFFC0D010 /* DMA33 Inner Loop Address Increment */ +#define DMA33_YCNT 0xFFC0D014 /* DMA33 Outer Loop Count Start Value (2D only) */ +#define DMA33_YMOD 0xFFC0D018 /* DMA33 Outer Loop Address Increment (2D only) */ +#define DMA33_DSCPTR_CUR 0xFFC0D024 /* DMA33 Current Descriptor Pointer */ +#define DMA33_DSCPTR_PRV 0xFFC0D028 /* DMA33 Previous Initial Descriptor Pointer */ +#define DMA33_ADDR_CUR 0xFFC0D02C /* DMA33 Current Address */ +#define DMA33_STAT 0xFFC0D030 /* DMA33 Status Register */ +#define DMA33_XCNT_CUR 0xFFC0D034 /* DMA33 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA33_YCNT_CUR 0xFFC0D038 /* DMA33 Current Row Count (2D only) */ +#define DMA33_BWLCNT 0xFFC0D040 /* DMA33 Bandwidth Limit Count */ +#define DMA33_BWLCNT_CUR 0xFFC0D044 /* DMA33 Bandwidth Limit Count Current */ +#define DMA33_BWMCNT 0xFFC0D048 /* DMA33 Bandwidth Monitor Count */ +#define DMA33_BWMCNT_CUR 0xFFC0D04C /* DMA33 Bandwidth Monitor Count Current */ +#define DMA34_DSCPTR_NXT 0xFFC0D080 /* DMA34 Pointer to Next Initial Descriptor */ +#define DMA34_ADDRSTART 0xFFC0D084 /* DMA34 Start Address of Current Buffer */ +#define DMA34_CFG 0xFFC0D088 /* DMA34 Configuration Register */ +#define DMA34_XCNT 0xFFC0D08C /* DMA34 Inner Loop Count Start Value */ +#define DMA34_XMOD 0xFFC0D090 /* DMA34 Inner Loop Address Increment */ +#define DMA34_YCNT 0xFFC0D094 /* DMA34 Outer Loop Count Start Value (2D only) */ +#define DMA34_YMOD 0xFFC0D098 /* DMA34 Outer Loop Address Increment (2D only) */ +#define DMA34_DSCPTR_CUR 0xFFC0D0A4 /* DMA34 Current Descriptor Pointer */ +#define DMA34_DSCPTR_PRV 0xFFC0D0A8 /* DMA34 Previous Initial Descriptor Pointer */ +#define DMA34_ADDR_CUR 0xFFC0D0AC /* DMA34 Current Address */ +#define DMA34_STAT 0xFFC0D0B0 /* DMA34 Status Register */ +#define DMA34_XCNT_CUR 0xFFC0D0B4 /* DMA34 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA34_YCNT_CUR 0xFFC0D0B8 /* DMA34 Current Row Count (2D only) */ +#define DMA34_BWLCNT 0xFFC0D0C0 /* DMA34 Bandwidth Limit Count */ +#define DMA34_BWLCNT_CUR 0xFFC0D0C4 /* DMA34 Bandwidth Limit Count Current */ +#define DMA34_BWMCNT 0xFFC0D0C8 /* DMA34 Bandwidth Monitor Count */ +#define DMA34_BWMCNT_CUR 0xFFC0D0CC /* DMA34 Bandwidth Monitor Count Current */ +#define DMA35_DSCPTR_NXT 0xFFC10000 /* DMA35 Pointer to Next Initial Descriptor */ +#define DMA35_ADDRSTART 0xFFC10004 /* DMA35 Start Address of Current Buffer */ +#define DMA35_CFG 0xFFC10008 /* DMA35 Configuration Register */ +#define DMA35_XCNT 0xFFC1000C /* DMA35 Inner Loop Count Start Value */ +#define DMA35_XMOD 0xFFC10010 /* DMA35 Inner Loop Address Increment */ +#define DMA35_YCNT 0xFFC10014 /* DMA35 Outer Loop Count Start Value (2D only) */ +#define DMA35_YMOD 0xFFC10018 /* DMA35 Outer Loop Address Increment (2D only) */ +#define DMA35_DSCPTR_CUR 0xFFC10024 /* DMA35 Current Descriptor Pointer */ +#define DMA35_DSCPTR_PRV 0xFFC10028 /* DMA35 Previous Initial Descriptor Pointer */ +#define DMA35_ADDR_CUR 0xFFC1002C /* DMA35 Current Address */ +#define DMA35_STAT 0xFFC10030 /* DMA35 Status Register */ +#define DMA35_XCNT_CUR 0xFFC10034 /* DMA35 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA35_YCNT_CUR 0xFFC10038 /* DMA35 Current Row Count (2D only) */ +#define DMA35_BWLCNT 0xFFC10040 /* DMA35 Bandwidth Limit Count */ +#define DMA35_BWLCNT_CUR 0xFFC10044 /* DMA35 Bandwidth Limit Count Current */ +#define DMA35_BWMCNT 0xFFC10048 /* DMA35 Bandwidth Monitor Count */ +#define DMA35_BWMCNT_CUR 0xFFC1004C /* DMA35 Bandwidth Monitor Count Current */ +#define DMA36_DSCPTR_NXT 0xFFC10080 /* DMA36 Pointer to Next Initial Descriptor */ +#define DMA36_ADDRSTART 0xFFC10084 /* DMA36 Start Address of Current Buffer */ +#define DMA36_CFG 0xFFC10088 /* DMA36 Configuration Register */ +#define DMA36_XCNT 0xFFC1008C /* DMA36 Inner Loop Count Start Value */ +#define DMA36_XMOD 0xFFC10090 /* DMA36 Inner Loop Address Increment */ +#define DMA36_YCNT 0xFFC10094 /* DMA36 Outer Loop Count Start Value (2D only) */ +#define DMA36_YMOD 0xFFC10098 /* DMA36 Outer Loop Address Increment (2D only) */ +#define DMA36_DSCPTR_CUR 0xFFC100A4 /* DMA36 Current Descriptor Pointer */ +#define DMA36_DSCPTR_PRV 0xFFC100A8 /* DMA36 Previous Initial Descriptor Pointer */ +#define DMA36_ADDR_CUR 0xFFC100AC /* DMA36 Current Address */ +#define DMA36_STAT 0xFFC100B0 /* DMA36 Status Register */ +#define DMA36_XCNT_CUR 0xFFC100B4 /* DMA36 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA36_YCNT_CUR 0xFFC100B8 /* DMA36 Current Row Count (2D only) */ +#define DMA36_BWLCNT 0xFFC100C0 /* DMA36 Bandwidth Limit Count */ +#define DMA36_BWLCNT_CUR 0xFFC100C4 /* DMA36 Bandwidth Limit Count Current */ +#define DMA36_BWMCNT 0xFFC100C8 /* DMA36 Bandwidth Monitor Count */ +#define DMA36_BWMCNT_CUR 0xFFC100CC /* DMA36 Bandwidth Monitor Count Current */ +#define DMA37_DSCPTR_NXT 0xFFC10100 /* DMA37 Pointer to Next Initial Descriptor */ +#define DMA37_ADDRSTART 0xFFC10104 /* DMA37 Start Address of Current Buffer */ +#define DMA37_CFG 0xFFC10108 /* DMA37 Configuration Register */ +#define DMA37_XCNT 0xFFC1010C /* DMA37 Inner Loop Count Start Value */ +#define DMA37_XMOD 0xFFC10110 /* DMA37 Inner Loop Address Increment */ +#define DMA37_YCNT 0xFFC10114 /* DMA37 Outer Loop Count Start Value (2D only) */ +#define DMA37_YMOD 0xFFC10118 /* DMA37 Outer Loop Address Increment (2D only) */ +#define DMA37_DSCPTR_CUR 0xFFC10124 /* DMA37 Current Descriptor Pointer */ +#define DMA37_DSCPTR_PRV 0xFFC10128 /* DMA37 Previous Initial Descriptor Pointer */ +#define DMA37_ADDR_CUR 0xFFC1012C /* DMA37 Current Address */ +#define DMA37_STAT 0xFFC10130 /* DMA37 Status Register */ +#define DMA37_XCNT_CUR 0xFFC10134 /* DMA37 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA37_YCNT_CUR 0xFFC10138 /* DMA37 Current Row Count (2D only) */ +#define DMA37_BWLCNT 0xFFC10140 /* DMA37 Bandwidth Limit Count */ +#define DMA37_BWLCNT_CUR 0xFFC10144 /* DMA37 Bandwidth Limit Count Current */ +#define DMA37_BWMCNT 0xFFC10148 /* DMA37 Bandwidth Monitor Count */ +#define DMA37_BWMCNT_CUR 0xFFC1014C /* DMA37 Bandwidth Monitor Count Current */ +#define DMA38_DSCPTR_NXT 0xFFC12000 /* DMA38 Pointer to Next Initial Descriptor */ +#define DMA38_ADDRSTART 0xFFC12004 /* DMA38 Start Address of Current Buffer */ +#define DMA38_CFG 0xFFC12008 /* DMA38 Configuration Register */ +#define DMA38_XCNT 0xFFC1200C /* DMA38 Inner Loop Count Start Value */ +#define DMA38_XMOD 0xFFC12010 /* DMA38 Inner Loop Address Increment */ +#define DMA38_YCNT 0xFFC12014 /* DMA38 Outer Loop Count Start Value (2D only) */ +#define DMA38_YMOD 0xFFC12018 /* DMA38 Outer Loop Address Increment (2D only) */ +#define DMA38_DSCPTR_CUR 0xFFC12024 /* DMA38 Current Descriptor Pointer */ +#define DMA38_DSCPTR_PRV 0xFFC12028 /* DMA38 Previous Initial Descriptor Pointer */ +#define DMA38_ADDR_CUR 0xFFC1202C /* DMA38 Current Address */ +#define DMA38_STAT 0xFFC12030 /* DMA38 Status Register */ +#define DMA38_XCNT_CUR 0xFFC12034 /* DMA38 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA38_YCNT_CUR 0xFFC12038 /* DMA38 Current Row Count (2D only) */ +#define DMA38_BWLCNT 0xFFC12040 /* DMA38 Bandwidth Limit Count */ +#define DMA38_BWLCNT_CUR 0xFFC12044 /* DMA38 Bandwidth Limit Count Current */ +#define DMA38_BWMCNT 0xFFC12048 /* DMA38 Bandwidth Monitor Count */ +#define DMA38_BWMCNT_CUR 0xFFC1204C /* DMA38 Bandwidth Monitor Count Current */ +#define DMA39_DSCPTR_NXT 0xFFC12080 /* DMA39 Pointer to Next Initial Descriptor */ +#define DMA39_ADDRSTART 0xFFC12084 /* DMA39 Start Address of Current Buffer */ +#define DMA39_CFG 0xFFC12088 /* DMA39 Configuration Register */ +#define DMA39_XCNT 0xFFC1208C /* DMA39 Inner Loop Count Start Value */ +#define DMA39_XMOD 0xFFC12090 /* DMA39 Inner Loop Address Increment */ +#define DMA39_YCNT 0xFFC12094 /* DMA39 Outer Loop Count Start Value (2D only) */ +#define DMA39_YMOD 0xFFC12098 /* DMA39 Outer Loop Address Increment (2D only) */ +#define DMA39_DSCPTR_CUR 0xFFC120A4 /* DMA39 Current Descriptor Pointer */ +#define DMA39_DSCPTR_PRV 0xFFC120A8 /* DMA39 Previous Initial Descriptor Pointer */ +#define DMA39_ADDR_CUR 0xFFC120AC /* DMA39 Current Address */ +#define DMA39_STAT 0xFFC120B0 /* DMA39 Status Register */ +#define DMA39_XCNT_CUR 0xFFC120B4 /* DMA39 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA39_YCNT_CUR 0xFFC120B8 /* DMA39 Current Row Count (2D only) */ +#define DMA39_BWLCNT 0xFFC120C0 /* DMA39 Bandwidth Limit Count */ +#define DMA39_BWLCNT_CUR 0xFFC120C4 /* DMA39 Bandwidth Limit Count Current */ +#define DMA39_BWMCNT 0xFFC120C8 /* DMA39 Bandwidth Monitor Count */ +#define DMA39_BWMCNT_CUR 0xFFC120CC /* DMA39 Bandwidth Monitor Count Current */ +#define DMA40_DSCPTR_NXT 0xFFC12100 /* DMA40 Pointer to Next Initial Descriptor */ +#define DMA40_ADDRSTART 0xFFC12104 /* DMA40 Start Address of Current Buffer */ +#define DMA40_CFG 0xFFC12108 /* DMA40 Configuration Register */ +#define DMA40_XCNT 0xFFC1210C /* DMA40 Inner Loop Count Start Value */ +#define DMA40_XMOD 0xFFC12110 /* DMA40 Inner Loop Address Increment */ +#define DMA40_YCNT 0xFFC12114 /* DMA40 Outer Loop Count Start Value (2D only) */ +#define DMA40_YMOD 0xFFC12118 /* DMA40 Outer Loop Address Increment (2D only) */ +#define DMA40_DSCPTR_CUR 0xFFC12124 /* DMA40 Current Descriptor Pointer */ +#define DMA40_DSCPTR_PRV 0xFFC12128 /* DMA40 Previous Initial Descriptor Pointer */ +#define DMA40_ADDR_CUR 0xFFC1212C /* DMA40 Current Address */ +#define DMA40_STAT 0xFFC12130 /* DMA40 Status Register */ +#define DMA40_XCNT_CUR 0xFFC12134 /* DMA40 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA40_YCNT_CUR 0xFFC12138 /* DMA40 Current Row Count (2D only) */ +#define DMA40_BWLCNT 0xFFC12140 /* DMA40 Bandwidth Limit Count */ +#define DMA40_BWLCNT_CUR 0xFFC12144 /* DMA40 Bandwidth Limit Count Current */ +#define DMA40_BWMCNT 0xFFC12148 /* DMA40 Bandwidth Monitor Count */ +#define DMA40_BWMCNT_CUR 0xFFC1214C /* DMA40 Bandwidth Monitor Count Current */ +#define DMA41_DSCPTR_NXT 0xFFC12180 /* DMA41 Pointer to Next Initial Descriptor */ +#define DMA41_ADDRSTART 0xFFC12184 /* DMA41 Start Address of Current Buffer */ +#define DMA41_CFG 0xFFC12188 /* DMA41 Configuration Register */ +#define DMA41_XCNT 0xFFC1218C /* DMA41 Inner Loop Count Start Value */ +#define DMA41_XMOD 0xFFC12190 /* DMA41 Inner Loop Address Increment */ +#define DMA41_YCNT 0xFFC12194 /* DMA41 Outer Loop Count Start Value (2D only) */ +#define DMA41_YMOD 0xFFC12198 /* DMA41 Outer Loop Address Increment (2D only) */ +#define DMA41_DSCPTR_CUR 0xFFC121A4 /* DMA41 Current Descriptor Pointer */ +#define DMA41_DSCPTR_PRV 0xFFC121A8 /* DMA41 Previous Initial Descriptor Pointer */ +#define DMA41_ADDR_CUR 0xFFC121AC /* DMA41 Current Address */ +#define DMA41_STAT 0xFFC121B0 /* DMA41 Status Register */ +#define DMA41_XCNT_CUR 0xFFC121B4 /* DMA41 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA41_YCNT_CUR 0xFFC121B8 /* DMA41 Current Row Count (2D only) */ +#define DMA41_BWLCNT 0xFFC121C0 /* DMA41 Bandwidth Limit Count */ +#define DMA41_BWLCNT_CUR 0xFFC121C4 /* DMA41 Bandwidth Limit Count Current */ +#define DMA41_BWMCNT 0xFFC121C8 /* DMA41 Bandwidth Monitor Count */ +#define DMA41_BWMCNT_CUR 0xFFC121CC /* DMA41 Bandwidth Monitor Count Current */ +#define DMA42_DSCPTR_NXT 0xFFC14000 /* DMA42 Pointer to Next Initial Descriptor */ +#define DMA42_ADDRSTART 0xFFC14004 /* DMA42 Start Address of Current Buffer */ +#define DMA42_CFG 0xFFC14008 /* DMA42 Configuration Register */ +#define DMA42_XCNT 0xFFC1400C /* DMA42 Inner Loop Count Start Value */ +#define DMA42_XMOD 0xFFC14010 /* DMA42 Inner Loop Address Increment */ +#define DMA42_YCNT 0xFFC14014 /* DMA42 Outer Loop Count Start Value (2D only) */ +#define DMA42_YMOD 0xFFC14018 /* DMA42 Outer Loop Address Increment (2D only) */ +#define DMA42_DSCPTR_CUR 0xFFC14024 /* DMA42 Current Descriptor Pointer */ +#define DMA42_DSCPTR_PRV 0xFFC14028 /* DMA42 Previous Initial Descriptor Pointer */ +#define DMA42_ADDR_CUR 0xFFC1402C /* DMA42 Current Address */ +#define DMA42_STAT 0xFFC14030 /* DMA42 Status Register */ +#define DMA42_XCNT_CUR 0xFFC14034 /* DMA42 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA42_YCNT_CUR 0xFFC14038 /* DMA42 Current Row Count (2D only) */ +#define DMA42_BWLCNT 0xFFC14040 /* DMA42 Bandwidth Limit Count */ +#define DMA42_BWLCNT_CUR 0xFFC14044 /* DMA42 Bandwidth Limit Count Current */ +#define DMA42_BWMCNT 0xFFC14048 /* DMA42 Bandwidth Monitor Count */ +#define DMA42_BWMCNT_CUR 0xFFC1404C /* DMA42 Bandwidth Monitor Count Current */ +#define DMA43_DSCPTR_NXT 0xFFC14080 /* DMA43 Pointer to Next Initial Descriptor */ +#define DMA43_ADDRSTART 0xFFC14084 /* DMA43 Start Address of Current Buffer */ +#define DMA43_CFG 0xFFC14088 /* DMA43 Configuration Register */ +#define DMA43_XCNT 0xFFC1408C /* DMA43 Inner Loop Count Start Value */ +#define DMA43_XMOD 0xFFC14090 /* DMA43 Inner Loop Address Increment */ +#define DMA43_YCNT 0xFFC14094 /* DMA43 Outer Loop Count Start Value (2D only) */ +#define DMA43_YMOD 0xFFC14098 /* DMA43 Outer Loop Address Increment (2D only) */ +#define DMA43_DSCPTR_CUR 0xFFC140A4 /* DMA43 Current Descriptor Pointer */ +#define DMA43_DSCPTR_PRV 0xFFC140A8 /* DMA43 Previous Initial Descriptor Pointer */ +#define DMA43_ADDR_CUR 0xFFC140AC /* DMA43 Current Address */ +#define DMA43_STAT 0xFFC140B0 /* DMA43 Status Register */ +#define DMA43_XCNT_CUR 0xFFC140B4 /* DMA43 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA43_YCNT_CUR 0xFFC140B8 /* DMA43 Current Row Count (2D only) */ +#define DMA43_BWLCNT 0xFFC140C0 /* DMA43 Bandwidth Limit Count */ +#define DMA43_BWLCNT_CUR 0xFFC140C4 /* DMA43 Bandwidth Limit Count Current */ +#define DMA43_BWMCNT 0xFFC140C8 /* DMA43 Bandwidth Monitor Count */ +#define DMA43_BWMCNT_CUR 0xFFC140CC /* DMA43 Bandwidth Monitor Count Current */ +#define DMA44_DSCPTR_NXT 0xFFC14100 /* DMA44 Pointer to Next Initial Descriptor */ +#define DMA44_ADDRSTART 0xFFC14104 /* DMA44 Start Address of Current Buffer */ +#define DMA44_CFG 0xFFC14108 /* DMA44 Configuration Register */ +#define DMA44_XCNT 0xFFC1410C /* DMA44 Inner Loop Count Start Value */ +#define DMA44_XMOD 0xFFC14110 /* DMA44 Inner Loop Address Increment */ +#define DMA44_YCNT 0xFFC14114 /* DMA44 Outer Loop Count Start Value (2D only) */ +#define DMA44_YMOD 0xFFC14118 /* DMA44 Outer Loop Address Increment (2D only) */ +#define DMA44_DSCPTR_CUR 0xFFC14124 /* DMA44 Current Descriptor Pointer */ +#define DMA44_DSCPTR_PRV 0xFFC14128 /* DMA44 Previous Initial Descriptor Pointer */ +#define DMA44_ADDR_CUR 0xFFC1412C /* DMA44 Current Address */ +#define DMA44_STAT 0xFFC14130 /* DMA44 Status Register */ +#define DMA44_XCNT_CUR 0xFFC14134 /* DMA44 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA44_YCNT_CUR 0xFFC14138 /* DMA44 Current Row Count (2D only) */ +#define DMA44_BWLCNT 0xFFC14140 /* DMA44 Bandwidth Limit Count */ +#define DMA44_BWLCNT_CUR 0xFFC14144 /* DMA44 Bandwidth Limit Count Current */ +#define DMA44_BWMCNT 0xFFC14148 /* DMA44 Bandwidth Monitor Count */ +#define DMA44_BWMCNT_CUR 0xFFC1414C /* DMA44 Bandwidth Monitor Count Current */ +#define DMA45_DSCPTR_NXT 0xFFC14180 /* DMA45 Pointer to Next Initial Descriptor */ +#define DMA45_ADDRSTART 0xFFC14184 /* DMA45 Start Address of Current Buffer */ +#define DMA45_CFG 0xFFC14188 /* DMA45 Configuration Register */ +#define DMA45_XCNT 0xFFC1418C /* DMA45 Inner Loop Count Start Value */ +#define DMA45_XMOD 0xFFC14190 /* DMA45 Inner Loop Address Increment */ +#define DMA45_YCNT 0xFFC14194 /* DMA45 Outer Loop Count Start Value (2D only) */ +#define DMA45_YMOD 0xFFC14198 /* DMA45 Outer Loop Address Increment (2D only) */ +#define DMA45_DSCPTR_CUR 0xFFC141A4 /* DMA45 Current Descriptor Pointer */ +#define DMA45_DSCPTR_PRV 0xFFC141A8 /* DMA45 Previous Initial Descriptor Pointer */ +#define DMA45_ADDR_CUR 0xFFC141AC /* DMA45 Current Address */ +#define DMA45_STAT 0xFFC141B0 /* DMA45 Status Register */ +#define DMA45_XCNT_CUR 0xFFC141B4 /* DMA45 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA45_YCNT_CUR 0xFFC141B8 /* DMA45 Current Row Count (2D only) */ +#define DMA45_BWLCNT 0xFFC141C0 /* DMA45 Bandwidth Limit Count */ +#define DMA45_BWLCNT_CUR 0xFFC141C4 /* DMA45 Bandwidth Limit Count Current */ +#define DMA45_BWMCNT 0xFFC141C8 /* DMA45 Bandwidth Monitor Count */ +#define DMA45_BWMCNT_CUR 0xFFC141CC /* DMA45 Bandwidth Monitor Count Current */ +#define DMA46_DSCPTR_NXT 0xFFC14200 /* DMA46 Pointer to Next Initial Descriptor */ +#define DMA46_ADDRSTART 0xFFC14204 /* DMA46 Start Address of Current Buffer */ +#define DMA46_CFG 0xFFC14208 /* DMA46 Configuration Register */ +#define DMA46_XCNT 0xFFC1420C /* DMA46 Inner Loop Count Start Value */ +#define DMA46_XMOD 0xFFC14210 /* DMA46 Inner Loop Address Increment */ +#define DMA46_YCNT 0xFFC14214 /* DMA46 Outer Loop Count Start Value (2D only) */ +#define DMA46_YMOD 0xFFC14218 /* DMA46 Outer Loop Address Increment (2D only) */ +#define DMA46_DSCPTR_CUR 0xFFC14224 /* DMA46 Current Descriptor Pointer */ +#define DMA46_DSCPTR_PRV 0xFFC14228 /* DMA46 Previous Initial Descriptor Pointer */ +#define DMA46_ADDR_CUR 0xFFC1422C /* DMA46 Current Address */ +#define DMA46_STAT 0xFFC14230 /* DMA46 Status Register */ +#define DMA46_XCNT_CUR 0xFFC14234 /* DMA46 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA46_YCNT_CUR 0xFFC14238 /* DMA46 Current Row Count (2D only) */ +#define DMA46_BWLCNT 0xFFC14240 /* DMA46 Bandwidth Limit Count */ +#define DMA46_BWLCNT_CUR 0xFFC14244 /* DMA46 Bandwidth Limit Count Current */ +#define DMA46_BWMCNT 0xFFC14248 /* DMA46 Bandwidth Monitor Count */ +#define DMA46_BWMCNT_CUR 0xFFC1424C /* DMA46 Bandwidth Monitor Count Current */ +#define ACM0_CTL 0xFFC45000 /* ACM0 ACM Control Register */ +#define ACM0_TC0 0xFFC45004 /* ACM0 ACM Timing Configuration 0 Register */ +#define ACM0_TC1 0xFFC45008 /* ACM0 ACM Timing Configuration 1 Register */ +#define ACM0_STAT 0xFFC4500C /* ACM0 ACM Status Register */ +#define ACM0_EVSTAT 0xFFC45010 /* ACM0 ACM Event Status Register */ +#define ACM0_EVMSK 0xFFC45014 /* ACM0 ACM Completed Event Interrupt Mask Register */ +#define ACM0_MEVSTAT 0xFFC45018 /* ACM0 ACM Missed Event Status Register */ +#define ACM0_MEVMSK 0xFFC4501C /* ACM0 ACM Missed Event Interrupt Mask Register */ +#define ACM0_EVCTL0 0xFFC45020 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL1 0xFFC45024 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL2 0xFFC45028 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL3 0xFFC4502C /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL4 0xFFC45030 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL5 0xFFC45034 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL6 0xFFC45038 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL7 0xFFC4503C /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL8 0xFFC45040 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL9 0xFFC45044 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL10 0xFFC45048 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL11 0xFFC4504C /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL12 0xFFC45050 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL13 0xFFC45054 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL14 0xFFC45058 /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVCTL15 0xFFC4505C /* ACM0 ACM Eventn Control Register */ +#define ACM0_EVTIME0 0xFFC45060 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME1 0xFFC45064 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME2 0xFFC45068 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME3 0xFFC4506C /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME4 0xFFC45070 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME5 0xFFC45074 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME6 0xFFC45078 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME7 0xFFC4507C /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME8 0xFFC45080 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME9 0xFFC45084 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME10 0xFFC45088 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME11 0xFFC4508C /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME12 0xFFC45090 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME13 0xFFC45094 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME14 0xFFC45098 /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVTIME15 0xFFC4509C /* ACM0 ACM Eventn Time Register */ +#define ACM0_EVORD0 0xFFC450A0 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD1 0xFFC450A4 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD2 0xFFC450A8 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD3 0xFFC450AC /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD4 0xFFC450B0 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD5 0xFFC450B4 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD6 0xFFC450B8 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD7 0xFFC450BC /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD8 0xFFC450C0 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD9 0xFFC450C4 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD10 0xFFC450C8 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD11 0xFFC450CC /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD12 0xFFC450D0 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD13 0xFFC450D4 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD14 0xFFC450D8 /* ACM0 ACM Eventn Order Register */ +#define ACM0_EVORD15 0xFFC450DC /* ACM0 ACM Eventn Order Register */ +#define ACM0_TMR0 0xFFC450E8 /* ACM0 ACM Timer 0 Register */ +#define ACM0_TMR1 0xFFC450EC /* ACM0 ACM Timer 1 Register */ +#define DMC0_ID 0xFFC80000 /* DMC0 Identification Register */ +#define DMC0_CTL 0xFFC80004 /* DMC0 Control Register */ +#define DMC0_STAT 0xFFC80008 /* DMC0 Status Register */ +#define DMC0_EFFCTL 0xFFC8000C /* DMC0 Efficiency Controller */ +#define DMC0_PRIO 0xFFC80010 /* DMC0 Priority ID Register */ +#define DMC0_PRIOMSK 0xFFC80014 /* DMC0 Priority ID Mask */ +#define DMC0_CFG 0xFFC80040 /* DMC0 SDRAM Configuration */ +#define DMC0_TR0 0xFFC80044 /* DMC0 Timing Register 0 */ +#define DMC0_TR1 0xFFC80048 /* DMC0 Timing Register 1 */ +#define DMC0_TR2 0xFFC8004C /* DMC0 Timing Register 2 */ +#define DMC0_MSK 0xFFC8005C /* DMC0 Mode Register Mask */ +#define DMC0_MR 0xFFC80060 /* DMC0 Mode Shadow register */ +#define DMC0_EMR1 0xFFC80064 /* DMC0 EMR1 Shadow Register */ +#define DMC0_EMR2 0xFFC80068 /* DMC0 EMR2 Shadow Register */ +#define DMC0_EMR3 0xFFC8006C /* DMC0 EMR3 Shadow Register */ +#define DMC0_DLLCTL 0xFFC80080 /* DMC0 DLL Control Register */ +#define DMC0_PADCTL 0xFFC800C0 /* DMC0 PAD Control Register 0 */ +#define SCB0_ARBR0 0xFFCA2408 /* SCB0 Read-channel Arbitration Register for MIn */ +#define SCB0_ARBR1 0xFFCA2428 /* SCB0 Read-channel Arbitration Register for MIn */ +#define SCB0_ARBR2 0xFFCA2448 /* SCB0 Read-channel Arbitration Register for MIn */ +#define SCB0_ARBR3 0xFFCA2468 /* SCB0 Read-channel Arbitration Register for MIn */ +#define SCB0_ARBR4 0xFFCA2488 /* SCB0 Read-channel Arbitration Register for MIn */ +#define SCB0_ARBR5 0xFFCA24A8 /* SCB0 Read-channel Arbitration Register for MIn */ +#define SCB0_ARBW0 0xFFCA240C /* SCB0 Write-channel Arbitration Register for MIn */ +#define SCB0_ARBW1 0xFFCA242C /* SCB0 Write-channel Arbitration Register for MIn */ +#define SCB0_ARBW2 0xFFCA244C /* SCB0 Write-channel Arbitration Register for MIn */ +#define SCB0_ARBW3 0xFFCA246C /* SCB0 Write-channel Arbitration Register for MIn */ +#define SCB0_ARBW4 0xFFCA248C /* SCB0 Write-channel Arbitration Register for MIn */ +#define SCB0_ARBW5 0xFFCA24AC /* SCB0 Write-channel Arbitration Register for MIn */ +#define SCB0_SLAVES 0xFFCA2FC0 /* SCB0 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB0_MASTERS 0xFFCA2FC4 /* SCB0 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB1_ARBR0 0xFFC42408 /* SCB1 Read-channel Arbitration Register for MIn */ +#define SCB1_ARBW0 0xFFC4240C /* SCB1 Write-channel Arbitration Register for MIn */ +#define SCB1_SLAVES 0xFFC42FC0 /* SCB1 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB1_MASTERS 0xFFC42FC4 /* SCB1 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB2_ARBR0 0xFFC06408 /* SCB2 Read-channel Arbitration Register for MIn */ +#define SCB2_ARBW0 0xFFC0640C /* SCB2 Write-channel Arbitration Register for MIn */ +#define SCB2_SLAVES 0xFFC06FC0 /* SCB2 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB2_MASTERS 0xFFC06FC4 /* SCB2 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB3_ARBR0 0xFFC08408 /* SCB3 Read-channel Arbitration Register for MIn */ +#define SCB3_ARBW0 0xFFC0840C /* SCB3 Write-channel Arbitration Register for MIn */ +#define SCB3_SLAVES 0xFFC08FC0 /* SCB3 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB3_MASTERS 0xFFC08FC4 /* SCB3 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB4_ARBR0 0xFFC0A408 /* SCB4 Read-channel Arbitration Register for MIn */ +#define SCB4_ARBW0 0xFFC0A40C /* SCB4 Write-channel Arbitration Register for MIn */ +#define SCB4_SLAVES 0xFFC0AFC0 /* SCB4 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB4_MASTERS 0xFFC0AFC4 /* SCB4 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB5_ARBR0 0xFFC0C408 /* SCB5 Read-channel Arbitration Register for MIn */ +#define SCB5_ARBW0 0xFFC0C40C /* SCB5 Write-channel Arbitration Register for MIn */ +#define SCB5_SLAVES 0xFFC0CFC0 /* SCB5 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB5_MASTERS 0xFFC0CFC4 /* SCB5 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB6_ARBR0 0xFFC0E408 /* SCB6 Read-channel Arbitration Register for MIn */ +#define SCB6_ARBW0 0xFFC0E40C /* SCB6 Write-channel Arbitration Register for MIn */ +#define SCB6_SLAVES 0xFFC0EFC0 /* SCB6 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB6_MASTERS 0xFFC0EFC4 /* SCB6 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB7_ARBR0 0xFFC11408 /* SCB7 Read-channel Arbitration Register for MIn */ +#define SCB7_ARBW0 0xFFC1140C /* SCB7 Write-channel Arbitration Register for MIn */ +#define SCB7_SLAVES 0xFFC11FC0 /* SCB7 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB7_MASTERS 0xFFC11FC4 /* SCB7 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB8_ARBR0 0xFFC13408 /* SCB8 Read-channel Arbitration Register for MIn */ +#define SCB8_ARBW0 0xFFC1340C /* SCB8 Write-channel Arbitration Register for MIn */ +#define SCB8_SLAVES 0xFFC13FC0 /* SCB8 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB8_MASTERS 0xFFC13FC4 /* SCB8 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB9_ARBR0 0xFFC15408 /* SCB9 Read-channel Arbitration Register for MIn */ +#define SCB9_ARBW0 0xFFC1540C /* SCB9 Write-channel Arbitration Register for MIn */ +#define SCB9_SLAVES 0xFFC15FC0 /* SCB9 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB9_MASTERS 0xFFC15FC4 /* SCB9 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB10_ARBR0 0xFFCA1408 /* SCB10 Read-channel Arbitration Register for MIn */ +#define SCB10_ARBR1 0xFFCA1428 /* SCB10 Read-channel Arbitration Register for MIn */ +#define SCB10_ARBR2 0xFFCA1448 /* SCB10 Read-channel Arbitration Register for MIn */ +#define SCB10_ARBW0 0xFFCA140C /* SCB10 Write-channel Arbitration Register for MIn */ +#define SCB10_ARBW1 0xFFCA142C /* SCB10 Write-channel Arbitration Register for MIn */ +#define SCB10_ARBW2 0xFFCA144C /* SCB10 Write-channel Arbitration Register for MIn */ +#define SCB10_SLAVES 0xFFCA1FC0 /* SCB10 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB10_MASTERS 0xFFCA1FC4 /* SCB10 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define SCB11_ARBR0 0xFFCA0408 /* SCB11 Read-channel Arbitration Register for MIn */ +#define SCB11_ARBR1 0xFFCA0428 /* SCB11 Read-channel Arbitration Register for MIn */ +#define SCB11_ARBR2 0xFFCA0448 /* SCB11 Read-channel Arbitration Register for MIn */ +#define SCB11_ARBR3 0xFFCA0468 /* SCB11 Read-channel Arbitration Register for MIn */ +#define SCB11_ARBR4 0xFFCA0488 /* SCB11 Read-channel Arbitration Register for MIn */ +#define SCB11_ARBR5 0xFFCA04A8 /* SCB11 Read-channel Arbitration Register for MIn */ +#define SCB11_ARBR6 0xFFCA04C8 /* SCB11 Read-channel Arbitration Register for MIn */ +#define SCB11_ARBW0 0xFFCA040C /* SCB11 Write-channel Arbitration Register for MIn */ +#define SCB11_ARBW1 0xFFCA042C /* SCB11 Write-channel Arbitration Register for MIn */ +#define SCB11_ARBW2 0xFFCA044C /* SCB11 Write-channel Arbitration Register for MIn */ +#define SCB11_ARBW3 0xFFCA046C /* SCB11 Write-channel Arbitration Register for MIn */ +#define SCB11_ARBW4 0xFFCA048C /* SCB11 Write-channel Arbitration Register for MIn */ +#define SCB11_ARBW5 0xFFCA04AC /* SCB11 Write-channel Arbitration Register for MIn */ +#define SCB11_ARBW6 0xFFCA04CC /* SCB11 Write-channel Arbitration Register for MIn */ +#define SCB11_SLAVES 0xFFCA0FC0 /* SCB11 Number of Slave Interfaces in Matrix (Reset = $NUM_SLOTS) */ +#define SCB11_MASTERS 0xFFCA0FC4 /* SCB11 Number of Master Interfaces in Matrix (Reset = $NUM_MASTERS) */ +#define L2_CTL 0xFFCA3000 /* L2CTL0 L2 Control Register */ +#define L2_ACTL_C0 0xFFCA3004 /* L2CTL0 L2 Core 0 Access Control Register */ +#define L2_ACTL_C1 0xFFCA3008 /* L2CTL0 L2 Core 1 Access Control Register */ +#define L2_ACTL_SYS 0xFFCA300C /* L2CTL0 L2 System Access Control Register */ +#define L2_STAT 0xFFCA3010 /* L2CTL0 L2 Status Register */ +#define L2_RPCR 0xFFCA3014 /* L2CTL0 L2 Read Priority Count Register */ +#define L2_WPCR 0xFFCA3018 /* L2CTL0 L2 Write Priority Count Register */ +#define L2_RFA 0xFFCA3024 /* L2CTL0 L2 Refresh Address Regsiter */ +#define L2_ERRADDR0 0xFFCA3040 /* L2CTL0 L2 Bank 0 ECC Error Address Register */ +#define L2_ERRADDR1 0xFFCA3044 /* L2CTL0 L2 Bank 1 ECC Error Address Register */ +#define L2_ERRADDR2 0xFFCA3048 /* L2CTL0 L2 Bank 2 ECC Error Address Register */ +#define L2_ERRADDR3 0xFFCA304C /* L2CTL0 L2 Bank 3 ECC Error Address Register */ +#define L2_ERRADDR4 0xFFCA3050 /* L2CTL0 L2 Bank 4 ECC Error Address Register */ +#define L2_ERRADDR5 0xFFCA3054 /* L2CTL0 L2 Bank 5 ECC Error Address Register */ +#define L2_ERRADDR6 0xFFCA3058 /* L2CTL0 L2 Bank 6 ECC Error Address Register */ +#define L2_ERRADDR7 0xFFCA305C /* L2CTL0 L2 Bank 7 ECC Error Address Register */ +#define L2_ET0 0xFFCA3080 /* L2CTL0 L2 AXI Error 0 Type Register */ +#define L2_EADDR0 0xFFCA3084 /* L2CTL0 L2 AXI Error 0 Address Register */ +#define L2_ET1 0xFFCA3088 /* L2CTL0 L2 AXI Error 1 Type Register */ +#define L2_EADDR1 0xFFCA308C /* L2CTL0 L2 AXI Error 1 Address Register */ +#define SEC0_CCTL0 0xFFCA4400 /* SEC0 Core Control Register n */ +#define SEC0_CCTL1 0xFFCA4440 /* SEC0 Core Control Register n */ +#define SEC0_CSTAT0 0xFFCA4404 /* SEC0 Core Status Register n */ +#define SEC0_CSTAT1 0xFFCA4444 /* SEC0 Core Status Register n */ +#define SEC0_CPND0 0xFFCA4408 /* SEC0 Core Pending IRQ Register n */ +#define SEC0_CPND1 0xFFCA4448 /* SEC0 Core Pending IRQ Register n */ +#define SEC0_CACT0 0xFFCA440C /* SEC0 Core Active IRQ Register n */ +#define SEC0_CACT1 0xFFCA444C /* SEC0 Core Active IRQ Register n */ +#define SEC0_CPMSK0 0xFFCA4410 /* SEC0 Core IRQ Priority Mask Register n */ +#define SEC0_CPMSK1 0xFFCA4450 /* SEC0 Core IRQ Priority Mask Register n */ +#define SEC0_CGMSK0 0xFFCA4414 /* SEC0 Core IRQ Group Mask Register n */ +#define SEC0_CGMSK1 0xFFCA4454 /* SEC0 Core IRQ Group Mask Register n */ +#define SEC0_CPLVL0 0xFFCA4418 /* SEC0 Core IRQ Priority Level Register n */ +#define SEC0_CPLVL1 0xFFCA4458 /* SEC0 Core IRQ Priority Level Register n */ +#define SEC0_CSID0 0xFFCA441C /* SEC0 Core IRQ Source ID Register n */ +#define SEC0_CSID1 0xFFCA445C /* SEC0 Core IRQ Source ID Register n */ +#define SEC0_FCTL 0xFFCA4010 /* SEC0 Fault Control Register */ +#define SEC0_FSTAT 0xFFCA4014 /* SEC0 Fault Status Register */ +#define SEC0_FSID 0xFFCA4018 /* SEC0 Fault Source ID Register */ +#define SEC0_FEND 0xFFCA401C /* SEC0 Fault End Register */ +#define SEC0_FDLY 0xFFCA4020 /* SEC0 Fault Delay Register */ +#define SEC0_FDLY_CUR 0xFFCA4024 /* SEC0 Fault Delay Current Register */ +#define SEC0_FSRDLY 0xFFCA4028 /* SEC0 Fault System Reset Delay Register */ +#define SEC0_FSRDLY_CUR 0xFFCA402C /* SEC0 Fault System Reset Delay Current Register */ +#define SEC0_FCOPP 0xFFCA4030 /* SEC0 Fault COP Period Register */ +#define SEC0_FCOPP_CUR 0xFFCA4034 /* SEC0 Fault COP Period Current Register */ +#define SEC0_GCTL 0xFFCA4000 /* SEC0 Global Control Register */ +#define SEC0_GSTAT 0xFFCA4004 /* SEC0 Global Status Register */ +#define SEC0_RAISE 0xFFCA4008 /* SEC0 Global Raise Register */ +#define SEC0_END 0xFFCA400C /* SEC0 Global End Register */ +#define SEC0_SCTL0 0xFFCA4800 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL1 0xFFCA4808 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL2 0xFFCA4810 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL3 0xFFCA4818 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL4 0xFFCA4820 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL5 0xFFCA4828 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL6 0xFFCA4830 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL7 0xFFCA4838 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL8 0xFFCA4840 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL9 0xFFCA4848 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL10 0xFFCA4850 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL11 0xFFCA4858 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL12 0xFFCA4860 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL13 0xFFCA4868 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL14 0xFFCA4870 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL15 0xFFCA4878 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL16 0xFFCA4880 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL17 0xFFCA4888 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL18 0xFFCA4890 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL19 0xFFCA4898 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL20 0xFFCA48A0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL21 0xFFCA48A8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL22 0xFFCA48B0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL23 0xFFCA48B8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL24 0xFFCA48C0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL25 0xFFCA48C8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL26 0xFFCA48D0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL27 0xFFCA48D8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL28 0xFFCA48E0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL29 0xFFCA48E8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL30 0xFFCA48F0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL31 0xFFCA48F8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL32 0xFFCA4900 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL33 0xFFCA4908 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL34 0xFFCA4910 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL35 0xFFCA4918 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL36 0xFFCA4920 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL37 0xFFCA4928 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL38 0xFFCA4930 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL39 0xFFCA4938 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL40 0xFFCA4940 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL41 0xFFCA4948 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL42 0xFFCA4950 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL43 0xFFCA4958 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL44 0xFFCA4960 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL45 0xFFCA4968 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL46 0xFFCA4970 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL47 0xFFCA4978 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL48 0xFFCA4980 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL49 0xFFCA4988 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL50 0xFFCA4990 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL51 0xFFCA4998 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL52 0xFFCA49A0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL53 0xFFCA49A8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL54 0xFFCA49B0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL55 0xFFCA49B8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL56 0xFFCA49C0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL57 0xFFCA49C8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL58 0xFFCA49D0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL59 0xFFCA49D8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL60 0xFFCA49E0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL61 0xFFCA49E8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL62 0xFFCA49F0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL63 0xFFCA49F8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL64 0xFFCA4A00 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL65 0xFFCA4A08 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL66 0xFFCA4A10 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL67 0xFFCA4A18 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL68 0xFFCA4A20 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL69 0xFFCA4A28 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL70 0xFFCA4A30 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL71 0xFFCA4A38 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL72 0xFFCA4A40 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL73 0xFFCA4A48 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL74 0xFFCA4A50 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL75 0xFFCA4A58 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL76 0xFFCA4A60 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL77 0xFFCA4A68 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL78 0xFFCA4A70 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL79 0xFFCA4A78 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL80 0xFFCA4A80 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL81 0xFFCA4A88 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL82 0xFFCA4A90 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL83 0xFFCA4A98 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL84 0xFFCA4AA0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL85 0xFFCA4AA8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL86 0xFFCA4AB0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL87 0xFFCA4AB8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL88 0xFFCA4AC0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL89 0xFFCA4AC8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL90 0xFFCA4AD0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL91 0xFFCA4AD8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL92 0xFFCA4AE0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL93 0xFFCA4AE8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL94 0xFFCA4AF0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL95 0xFFCA4AF8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL96 0xFFCA4B00 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL97 0xFFCA4B08 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL98 0xFFCA4B10 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL99 0xFFCA4B18 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL100 0xFFCA4B20 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL101 0xFFCA4B28 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL102 0xFFCA4B30 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL103 0xFFCA4B38 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL104 0xFFCA4B40 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL105 0xFFCA4B48 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL106 0xFFCA4B50 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL107 0xFFCA4B58 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL108 0xFFCA4B60 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL109 0xFFCA4B68 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL110 0xFFCA4B70 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL111 0xFFCA4B78 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL112 0xFFCA4B80 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL113 0xFFCA4B88 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL114 0xFFCA4B90 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL115 0xFFCA4B98 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL116 0xFFCA4BA0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL117 0xFFCA4BA8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL118 0xFFCA4BB0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL119 0xFFCA4BB8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL120 0xFFCA4BC0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL121 0xFFCA4BC8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL122 0xFFCA4BD0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL123 0xFFCA4BD8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL124 0xFFCA4BE0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL125 0xFFCA4BE8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL126 0xFFCA4BF0 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL127 0xFFCA4BF8 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL128 0xFFCA4C00 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL129 0xFFCA4C08 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL130 0xFFCA4C10 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL131 0xFFCA4C18 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL132 0xFFCA4C20 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL133 0xFFCA4C28 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL134 0xFFCA4C30 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL135 0xFFCA4C38 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL136 0xFFCA4C40 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL137 0xFFCA4C48 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL138 0xFFCA4C50 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SCTL139 0xFFCA4C58 /* SEC0 IRQ Source Control Register n */ +#define SEC0_SSTAT0 0xFFCA4804 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT1 0xFFCA480C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT2 0xFFCA4814 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT3 0xFFCA481C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT4 0xFFCA4824 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT5 0xFFCA482C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT6 0xFFCA4834 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT7 0xFFCA483C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT8 0xFFCA4844 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT9 0xFFCA484C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT10 0xFFCA4854 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT11 0xFFCA485C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT12 0xFFCA4864 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT13 0xFFCA486C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT14 0xFFCA4874 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT15 0xFFCA487C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT16 0xFFCA4884 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT17 0xFFCA488C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT18 0xFFCA4894 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT19 0xFFCA489C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT20 0xFFCA48A4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT21 0xFFCA48AC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT22 0xFFCA48B4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT23 0xFFCA48BC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT24 0xFFCA48C4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT25 0xFFCA48CC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT26 0xFFCA48D4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT27 0xFFCA48DC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT28 0xFFCA48E4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT29 0xFFCA48EC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT30 0xFFCA48F4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT31 0xFFCA48FC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT32 0xFFCA4904 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT33 0xFFCA490C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT34 0xFFCA4914 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT35 0xFFCA491C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT36 0xFFCA4924 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT37 0xFFCA492C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT38 0xFFCA4934 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT39 0xFFCA493C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT40 0xFFCA4944 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT41 0xFFCA494C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT42 0xFFCA4954 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT43 0xFFCA495C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT44 0xFFCA4964 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT45 0xFFCA496C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT46 0xFFCA4974 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT47 0xFFCA497C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT48 0xFFCA4984 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT49 0xFFCA498C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT50 0xFFCA4994 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT51 0xFFCA499C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT52 0xFFCA49A4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT53 0xFFCA49AC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT54 0xFFCA49B4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT55 0xFFCA49BC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT56 0xFFCA49C4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT57 0xFFCA49CC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT58 0xFFCA49D4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT59 0xFFCA49DC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT60 0xFFCA49E4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT61 0xFFCA49EC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT62 0xFFCA49F4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT63 0xFFCA49FC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT64 0xFFCA4A04 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT65 0xFFCA4A0C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT66 0xFFCA4A14 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT67 0xFFCA4A1C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT68 0xFFCA4A24 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT69 0xFFCA4A2C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT70 0xFFCA4A34 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT71 0xFFCA4A3C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT72 0xFFCA4A44 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT73 0xFFCA4A4C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT74 0xFFCA4A54 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT75 0xFFCA4A5C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT76 0xFFCA4A64 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT77 0xFFCA4A6C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT78 0xFFCA4A74 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT79 0xFFCA4A7C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT80 0xFFCA4A84 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT81 0xFFCA4A8C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT82 0xFFCA4A94 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT83 0xFFCA4A9C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT84 0xFFCA4AA4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT85 0xFFCA4AAC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT86 0xFFCA4AB4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT87 0xFFCA4ABC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT88 0xFFCA4AC4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT89 0xFFCA4ACC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT90 0xFFCA4AD4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT91 0xFFCA4ADC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT92 0xFFCA4AE4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT93 0xFFCA4AEC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT94 0xFFCA4AF4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT95 0xFFCA4AFC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT96 0xFFCA4B04 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT97 0xFFCA4B0C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT98 0xFFCA4B14 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT99 0xFFCA4B1C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT100 0xFFCA4B24 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT101 0xFFCA4B2C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT102 0xFFCA4B34 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT103 0xFFCA4B3C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT104 0xFFCA4B44 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT105 0xFFCA4B4C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT106 0xFFCA4B54 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT107 0xFFCA4B5C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT108 0xFFCA4B64 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT109 0xFFCA4B6C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT110 0xFFCA4B74 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT111 0xFFCA4B7C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT112 0xFFCA4B84 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT113 0xFFCA4B8C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT114 0xFFCA4B94 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT115 0xFFCA4B9C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT116 0xFFCA4BA4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT117 0xFFCA4BAC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT118 0xFFCA4BB4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT119 0xFFCA4BBC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT120 0xFFCA4BC4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT121 0xFFCA4BCC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT122 0xFFCA4BD4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT123 0xFFCA4BDC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT124 0xFFCA4BE4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT125 0xFFCA4BEC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT126 0xFFCA4BF4 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT127 0xFFCA4BFC /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT128 0xFFCA4C04 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT129 0xFFCA4C0C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT130 0xFFCA4C14 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT131 0xFFCA4C1C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT132 0xFFCA4C24 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT133 0xFFCA4C2C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT134 0xFFCA4C34 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT135 0xFFCA4C3C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT136 0xFFCA4C44 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT137 0xFFCA4C4C /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT138 0xFFCA4C54 /* SEC0 IRQ Source Status Register n */ +#define SEC0_SSTAT139 0xFFCA4C5C /* SEC0 IRQ Source Status Register n */ +#define TRU0_SSR0 0xFFCA5000 /* TRU0 Slave Select Register */ +#define TRU0_SSR1 0xFFCA5004 /* TRU0 Slave Select Register */ +#define TRU0_SSR2 0xFFCA5008 /* TRU0 Slave Select Register */ +#define TRU0_SSR3 0xFFCA500C /* TRU0 Slave Select Register */ +#define TRU0_SSR4 0xFFCA5010 /* TRU0 Slave Select Register */ +#define TRU0_SSR5 0xFFCA5014 /* TRU0 Slave Select Register */ +#define TRU0_SSR6 0xFFCA5018 /* TRU0 Slave Select Register */ +#define TRU0_SSR7 0xFFCA501C /* TRU0 Slave Select Register */ +#define TRU0_SSR8 0xFFCA5020 /* TRU0 Slave Select Register */ +#define TRU0_SSR9 0xFFCA5024 /* TRU0 Slave Select Register */ +#define TRU0_SSR10 0xFFCA5028 /* TRU0 Slave Select Register */ +#define TRU0_SSR11 0xFFCA502C /* TRU0 Slave Select Register */ +#define TRU0_SSR12 0xFFCA5030 /* TRU0 Slave Select Register */ +#define TRU0_SSR13 0xFFCA5034 /* TRU0 Slave Select Register */ +#define TRU0_SSR14 0xFFCA5038 /* TRU0 Slave Select Register */ +#define TRU0_SSR15 0xFFCA503C /* TRU0 Slave Select Register */ +#define TRU0_SSR16 0xFFCA5040 /* TRU0 Slave Select Register */ +#define TRU0_SSR17 0xFFCA5044 /* TRU0 Slave Select Register */ +#define TRU0_SSR18 0xFFCA5048 /* TRU0 Slave Select Register */ +#define TRU0_SSR19 0xFFCA504C /* TRU0 Slave Select Register */ +#define TRU0_SSR20 0xFFCA5050 /* TRU0 Slave Select Register */ +#define TRU0_SSR21 0xFFCA5054 /* TRU0 Slave Select Register */ +#define TRU0_SSR22 0xFFCA5058 /* TRU0 Slave Select Register */ +#define TRU0_SSR23 0xFFCA505C /* TRU0 Slave Select Register */ +#define TRU0_SSR24 0xFFCA5060 /* TRU0 Slave Select Register */ +#define TRU0_SSR25 0xFFCA5064 /* TRU0 Slave Select Register */ +#define TRU0_SSR26 0xFFCA5068 /* TRU0 Slave Select Register */ +#define TRU0_SSR27 0xFFCA506C /* TRU0 Slave Select Register */ +#define TRU0_SSR28 0xFFCA5070 /* TRU0 Slave Select Register */ +#define TRU0_SSR29 0xFFCA5074 /* TRU0 Slave Select Register */ +#define TRU0_SSR30 0xFFCA5078 /* TRU0 Slave Select Register */ +#define TRU0_SSR31 0xFFCA507C /* TRU0 Slave Select Register */ +#define TRU0_SSR32 0xFFCA5080 /* TRU0 Slave Select Register */ +#define TRU0_SSR33 0xFFCA5084 /* TRU0 Slave Select Register */ +#define TRU0_SSR34 0xFFCA5088 /* TRU0 Slave Select Register */ +#define TRU0_SSR35 0xFFCA508C /* TRU0 Slave Select Register */ +#define TRU0_SSR36 0xFFCA5090 /* TRU0 Slave Select Register */ +#define TRU0_SSR37 0xFFCA5094 /* TRU0 Slave Select Register */ +#define TRU0_SSR38 0xFFCA5098 /* TRU0 Slave Select Register */ +#define TRU0_SSR39 0xFFCA509C /* TRU0 Slave Select Register */ +#define TRU0_SSR40 0xFFCA50A0 /* TRU0 Slave Select Register */ +#define TRU0_SSR41 0xFFCA50A4 /* TRU0 Slave Select Register */ +#define TRU0_SSR42 0xFFCA50A8 /* TRU0 Slave Select Register */ +#define TRU0_SSR43 0xFFCA50AC /* TRU0 Slave Select Register */ +#define TRU0_SSR44 0xFFCA50B0 /* TRU0 Slave Select Register */ +#define TRU0_SSR45 0xFFCA50B4 /* TRU0 Slave Select Register */ +#define TRU0_SSR46 0xFFCA50B8 /* TRU0 Slave Select Register */ +#define TRU0_SSR47 0xFFCA50BC /* TRU0 Slave Select Register */ +#define TRU0_SSR48 0xFFCA50C0 /* TRU0 Slave Select Register */ +#define TRU0_SSR49 0xFFCA50C4 /* TRU0 Slave Select Register */ +#define TRU0_SSR50 0xFFCA50C8 /* TRU0 Slave Select Register */ +#define TRU0_SSR51 0xFFCA50CC /* TRU0 Slave Select Register */ +#define TRU0_SSR52 0xFFCA50D0 /* TRU0 Slave Select Register */ +#define TRU0_SSR53 0xFFCA50D4 /* TRU0 Slave Select Register */ +#define TRU0_SSR54 0xFFCA50D8 /* TRU0 Slave Select Register */ +#define TRU0_SSR55 0xFFCA50DC /* TRU0 Slave Select Register */ +#define TRU0_SSR56 0xFFCA50E0 /* TRU0 Slave Select Register */ +#define TRU0_SSR57 0xFFCA50E4 /* TRU0 Slave Select Register */ +#define TRU0_SSR58 0xFFCA50E8 /* TRU0 Slave Select Register */ +#define TRU0_SSR59 0xFFCA50EC /* TRU0 Slave Select Register */ +#define TRU0_SSR60 0xFFCA50F0 /* TRU0 Slave Select Register */ +#define TRU0_SSR61 0xFFCA50F4 /* TRU0 Slave Select Register */ +#define TRU0_SSR62 0xFFCA50F8 /* TRU0 Slave Select Register */ +#define TRU0_SSR63 0xFFCA50FC /* TRU0 Slave Select Register */ +#define TRU0_SSR64 0xFFCA5100 /* TRU0 Slave Select Register */ +#define TRU0_SSR65 0xFFCA5104 /* TRU0 Slave Select Register */ +#define TRU0_SSR66 0xFFCA5108 /* TRU0 Slave Select Register */ +#define TRU0_SSR67 0xFFCA510C /* TRU0 Slave Select Register */ +#define TRU0_SSR68 0xFFCA5110 /* TRU0 Slave Select Register */ +#define TRU0_SSR69 0xFFCA5114 /* TRU0 Slave Select Register */ +#define TRU0_SSR70 0xFFCA5118 /* TRU0 Slave Select Register */ +#define TRU0_SSR71 0xFFCA511C /* TRU0 Slave Select Register */ +#define TRU0_SSR72 0xFFCA5120 /* TRU0 Slave Select Register */ +#define TRU0_SSR73 0xFFCA5124 /* TRU0 Slave Select Register */ +#define TRU0_SSR74 0xFFCA5128 /* TRU0 Slave Select Register */ +#define TRU0_SSR75 0xFFCA512C /* TRU0 Slave Select Register */ +#define TRU0_SSR76 0xFFCA5130 /* TRU0 Slave Select Register */ +#define TRU0_SSR77 0xFFCA5134 /* TRU0 Slave Select Register */ +#define TRU0_SSR78 0xFFCA5138 /* TRU0 Slave Select Register */ +#define TRU0_SSR79 0xFFCA513C /* TRU0 Slave Select Register */ +#define TRU0_SSR80 0xFFCA5140 /* TRU0 Slave Select Register */ +#define TRU0_SSR81 0xFFCA5144 /* TRU0 Slave Select Register */ +#define TRU0_SSR82 0xFFCA5148 /* TRU0 Slave Select Register */ +#define TRU0_SSR83 0xFFCA514C /* TRU0 Slave Select Register */ +#define TRU0_SSR84 0xFFCA5150 /* TRU0 Slave Select Register */ +#define TRU0_SSR85 0xFFCA5154 /* TRU0 Slave Select Register */ +#define TRU0_SSR86 0xFFCA5158 /* TRU0 Slave Select Register */ +#define TRU0_MTR 0xFFCA57E0 /* TRU0 Master Trigger Register */ +#define TRU0_ERRADDR 0xFFCA57E8 /* TRU0 Error Address Register */ +#define TRU0_STAT 0xFFCA57EC /* TRU0 Status Information Register */ +#define TRU0_REVID 0xFFCA57F0 /* TRU0 Revision ID Register */ +#define TRU0_GCTL 0xFFCA57F4 /* TRU0 Global Control Register */ +#define RCU0_CTL 0xFFCA6000 /* RCU0 Control Register */ +#define RCU0_STAT 0xFFCA6004 /* RCU0 Status Register */ +#define RCU0_CRCTL 0xFFCA6008 /* RCU0 Core Reset Control Register */ +#define RCU0_CRSTAT 0xFFCA600C /* RCU0 Core Reset Status Register */ +#define RCU0_SIDIS 0xFFCA6010 /* RCU0 System Interface Disable Register */ +#define RCU0_SISTAT 0xFFCA6014 /* RCU0 System Interface Status Register */ +#define RCU0_SVECT_LCK 0xFFCA6018 /* RCU0 SVECT Lock Register */ +#define RCU0_BCODE 0xFFCA601C /* RCU0 Boot Code Register */ +#define RCU0_SVECT0 0xFFCA6020 /* RCU0 Software Vector Register n */ +#define RCU0_SVECT1 0xFFCA6024 /* RCU0 Software Vector Register n */ +#define SPU0_CTL 0xFFCA7000 /* SPU0 Control Register */ +#define SPU0_STAT 0xFFCA7004 /* SPU0 Status Register */ +#define SPU0_WP0 0xFFCA7400 /* SPU0 Write Protect Register n */ +#define SPU0_WP1 0xFFCA7404 /* SPU0 Write Protect Register n */ +#define SPU0_WP2 0xFFCA7408 /* SPU0 Write Protect Register n */ +#define SPU0_WP3 0xFFCA740C /* SPU0 Write Protect Register n */ +#define SPU0_WP4 0xFFCA7410 /* SPU0 Write Protect Register n */ +#define SPU0_WP5 0xFFCA7414 /* SPU0 Write Protect Register n */ +#define SPU0_WP6 0xFFCA7418 /* SPU0 Write Protect Register n */ +#define SPU0_WP7 0xFFCA741C /* SPU0 Write Protect Register n */ +#define SPU0_WP8 0xFFCA7420 /* SPU0 Write Protect Register n */ +#define SPU0_WP9 0xFFCA7424 /* SPU0 Write Protect Register n */ +#define SPU0_WP10 0xFFCA7428 /* SPU0 Write Protect Register n */ +#define SPU0_WP11 0xFFCA742C /* SPU0 Write Protect Register n */ +#define SPU0_WP12 0xFFCA7430 /* SPU0 Write Protect Register n */ +#define SPU0_WP13 0xFFCA7434 /* SPU0 Write Protect Register n */ +#define SPU0_WP14 0xFFCA7438 /* SPU0 Write Protect Register n */ +#define SPU0_WP15 0xFFCA743C /* SPU0 Write Protect Register n */ +#define SPU0_WP16 0xFFCA7440 /* SPU0 Write Protect Register n */ +#define SPU0_WP17 0xFFCA7444 /* SPU0 Write Protect Register n */ +#define SPU0_WP18 0xFFCA7448 /* SPU0 Write Protect Register n */ +#define SPU0_WP19 0xFFCA744C /* SPU0 Write Protect Register n */ +#define SPU0_WP20 0xFFCA7450 /* SPU0 Write Protect Register n */ +#define SPU0_WP21 0xFFCA7454 /* SPU0 Write Protect Register n */ +#define SPU0_WP22 0xFFCA7458 /* SPU0 Write Protect Register n */ +#define SPU0_WP23 0xFFCA745C /* SPU0 Write Protect Register n */ +#define SPU0_WP24 0xFFCA7460 /* SPU0 Write Protect Register n */ +#define SPU0_WP25 0xFFCA7464 /* SPU0 Write Protect Register n */ +#define SPU0_WP26 0xFFCA7468 /* SPU0 Write Protect Register n */ +#define SPU0_WP27 0xFFCA746C /* SPU0 Write Protect Register n */ +#define SPU0_WP28 0xFFCA7470 /* SPU0 Write Protect Register n */ +#define SPU0_WP29 0xFFCA7474 /* SPU0 Write Protect Register n */ +#define SPU0_WP30 0xFFCA7478 /* SPU0 Write Protect Register n */ +#define SPU0_WP31 0xFFCA747C /* SPU0 Write Protect Register n */ +#define SPU0_WP32 0xFFCA7480 /* SPU0 Write Protect Register n */ +#define SPU0_WP33 0xFFCA7484 /* SPU0 Write Protect Register n */ +#define SPU0_WP34 0xFFCA7488 /* SPU0 Write Protect Register n */ +#define SPU0_WP35 0xFFCA748C /* SPU0 Write Protect Register n */ +#define SPU0_WP36 0xFFCA7490 /* SPU0 Write Protect Register n */ +#define SPU0_WP37 0xFFCA7494 /* SPU0 Write Protect Register n */ +#define SPU0_WP38 0xFFCA7498 /* SPU0 Write Protect Register n */ +#define SPU0_WP39 0xFFCA749C /* SPU0 Write Protect Register n */ +#define SPU0_WP40 0xFFCA74A0 /* SPU0 Write Protect Register n */ +#define SPU0_WP41 0xFFCA74A4 /* SPU0 Write Protect Register n */ +#define SPU0_WP42 0xFFCA74A8 /* SPU0 Write Protect Register n */ +#define SPU0_WP43 0xFFCA74AC /* SPU0 Write Protect Register n */ +#define SPU0_WP44 0xFFCA74B0 /* SPU0 Write Protect Register n */ +#define SPU0_WP45 0xFFCA74B4 /* SPU0 Write Protect Register n */ +#define SPU0_WP46 0xFFCA74B8 /* SPU0 Write Protect Register n */ +#define SPU0_WP47 0xFFCA74BC /* SPU0 Write Protect Register n */ +#define SPU0_WP48 0xFFCA74C0 /* SPU0 Write Protect Register n */ +#define SPU0_WP49 0xFFCA74C4 /* SPU0 Write Protect Register n */ +#define SPU0_WP50 0xFFCA74C8 /* SPU0 Write Protect Register n */ +#define SPU0_WP51 0xFFCA74CC /* SPU0 Write Protect Register n */ +#define SPU0_WP52 0xFFCA74D0 /* SPU0 Write Protect Register n */ +#define SPU0_WP53 0xFFCA74D4 /* SPU0 Write Protect Register n */ +#define SPU0_WP54 0xFFCA74D8 /* SPU0 Write Protect Register n */ +#define SPU0_WP55 0xFFCA74DC /* SPU0 Write Protect Register n */ +#define SPU0_WP56 0xFFCA74E0 /* SPU0 Write Protect Register n */ +#define SPU0_WP57 0xFFCA74E4 /* SPU0 Write Protect Register n */ +#define SPU0_WP58 0xFFCA74E8 /* SPU0 Write Protect Register n */ +#define SPU0_WP59 0xFFCA74EC /* SPU0 Write Protect Register n */ +#define SPU0_WP60 0xFFCA74F0 /* SPU0 Write Protect Register n */ +#define SPU0_WP61 0xFFCA74F4 /* SPU0 Write Protect Register n */ +#define SPU0_WP62 0xFFCA74F8 /* SPU0 Write Protect Register n */ +#define SPU0_WP63 0xFFCA74FC /* SPU0 Write Protect Register n */ +#define SPU0_WP64 0xFFCA7500 /* SPU0 Write Protect Register n */ +#define SPU0_WP65 0xFFCA7504 /* SPU0 Write Protect Register n */ +#define SPU0_WP66 0xFFCA7508 /* SPU0 Write Protect Register n */ +#define SPU0_WP67 0xFFCA750C /* SPU0 Write Protect Register n */ +#define SPU0_WP68 0xFFCA7510 /* SPU0 Write Protect Register n */ +#define SPU0_WP69 0xFFCA7514 /* SPU0 Write Protect Register n */ +#define SPU0_WP70 0xFFCA7518 /* SPU0 Write Protect Register n */ +#define SPU0_WP71 0xFFCA751C /* SPU0 Write Protect Register n */ +#define SPU0_WP72 0xFFCA7520 /* SPU0 Write Protect Register n */ +#define SPU0_WP73 0xFFCA7524 /* SPU0 Write Protect Register n */ +#define SPU0_WP74 0xFFCA7528 /* SPU0 Write Protect Register n */ +#define SPU0_WP75 0xFFCA752C /* SPU0 Write Protect Register n */ +#define SPU0_WP76 0xFFCA7530 /* SPU0 Write Protect Register n */ +#define SPU0_WP77 0xFFCA7534 /* SPU0 Write Protect Register n */ +#define SPU0_WP78 0xFFCA7538 /* SPU0 Write Protect Register n */ +#define SPU0_WP79 0xFFCA753C /* SPU0 Write Protect Register n */ +#define SPU0_WP80 0xFFCA7540 /* SPU0 Write Protect Register n */ +#define SPU0_WP81 0xFFCA7544 /* SPU0 Write Protect Register n */ +#define SPU0_WP82 0xFFCA7548 /* SPU0 Write Protect Register n */ +#define SPU0_WP83 0xFFCA754C /* SPU0 Write Protect Register n */ +#define SPU0_WP84 0xFFCA7550 /* SPU0 Write Protect Register n */ +#define SPU0_WP85 0xFFCA7554 /* SPU0 Write Protect Register n */ +#define CGU_CTL 0xFFCA8000 /* CGU0 Control Register */ +#define CGU_STAT 0xFFCA8004 /* CGU0 Status Register */ +#define CGU_DIV 0xFFCA8008 /* CGU0 Divisor Register */ +#define CGU_CLKOUTSEL 0xFFCA800C /* CGU0 CLKOUT Select Register */ +#define DPM0_CTL 0xFFCA9000 /* DPM0 Control Register */ +#define DPM0_STAT 0xFFCA9004 /* DPM0 Status Register */ +#define DPM0_CCBF_DIS 0xFFCA9008 /* DPM0 Core Clock Buffer Disable Register */ +#define DPM0_CCBF_EN 0xFFCA900C /* DPM0 Core Clock Buffer Enable Register */ +#define DPM0_CCBF_STAT 0xFFCA9010 /* DPM0 Core Clock Buffer Status Register */ +#define DPM0_CCBF_STAT_STKY 0xFFCA9014 /* DPM0 Core Clock Buffer Status Sticky Register */ +#define DPM0_SCBF_DIS 0xFFCA9018 /* DPM0 System Clock Buffer Disable Register */ +#define DPM0_WAKE_EN 0xFFCA901C /* DPM0 Wakeup Enable Register */ +#define DPM0_WAKE_POL 0xFFCA9020 /* DPM0 Wakeup Polarity Register */ +#define DPM0_WAKE_STAT 0xFFCA9024 /* DPM0 Wakeup Status Register */ +#define DPM0_HIB_DIS 0xFFCA9028 /* DPM0 Hibernate Disable Register */ +#define DPM0_PGCNTR 0xFFCA902C /* DPM0 Power Good Counter Register */ +#define DPM0_RESTORE0 0xFFCA9030 /* DPM0 Restore Register */ +#define DPM0_RESTORE1 0xFFCA9034 /* DPM0 Restore Register */ +#define DPM0_RESTORE2 0xFFCA9038 /* DPM0 Restore Register */ +#define DPM0_RESTORE3 0xFFCA903C /* DPM0 Restore Register */ +#define DPM0_RESTORE4 0xFFCA9040 /* DPM0 Restore Register */ +#define DPM0_RESTORE5 0xFFCA9044 /* DPM0 Restore Register */ +#define DPM0_RESTORE6 0xFFCA9048 /* DPM0 Restore Register */ +#define DPM0_RESTORE7 0xFFCA904C /* DPM0 Restore Register */ +#define DPM0_RESTORE8 0xFFCA9050 /* DPM0 Restore Register */ +#define DPM0_RESTORE9 0xFFCA9054 /* DPM0 Restore Register */ +#define DPM0_RESTORE10 0xFFCA9058 /* DPM0 Restore Register */ +#define DPM0_RESTORE11 0xFFCA905C /* DPM0 Restore Register */ +#define DPM0_RESTORE12 0xFFCA9060 /* DPM0 Restore Register */ +#define DPM0_RESTORE13 0xFFCA9064 /* DPM0 Restore Register */ +#define DPM0_RESTORE14 0xFFCA9068 /* DPM0 Restore Register */ +#define DPM0_RESTORE15 0xFFCA906C /* DPM0 Restore Register */ +#define EFS0_CTL 0xFFCC0000 /* EFS0 Control Register */ +#define EFS0_DAT0 0xFFCC0008 /* EFS0 Data Register 0 */ +#define EFS0_DAT1 0xFFCC000C /* EFS0 Data Register 1 */ +#define EFS0_DAT2 0xFFCC0010 /* EFS0 Data Register 2 */ +#define EFS0_DAT3 0xFFCC0014 /* EFS0 Data Register 3 */ +#define EFS0_DAT4 0xFFCC0018 /* EFS0 Data Register 4 */ +#define EFS0_DAT5 0xFFCC001C /* EFS0 Data Register 5 */ +#define EFS0_DAT6 0xFFCC0020 /* EFS0 Data Register 6 */ +#define EFS0_DAT7 0xFFCC0024 /* EFS0 Data Register 7 */ +#define EFS0_PGM0 0xFFCC0028 /* EFS0 Program Register 0 */ +#define EFS0_PGM1 0xFFCC002C /* EFS0 Program Register 1 */ +#define EFS0_PGM2 0xFFCC0030 /* EFS0 Program Register 2 */ +#define EFS0_PGM3 0xFFCC0034 /* EFS0 Program Register 3 */ +#define EFS0_PGM4 0xFFCC0038 /* EFS0 Program Register 4 */ +#define EFS0_PGM5 0xFFCC003C /* EFS0 Program Register 5 */ +#define EFS0_PGM6 0xFFCC0040 /* EFS0 Program Register 6 */ +#define EFS0_PGM7 0xFFCC0044 /* EFS0 Program Register 7 */ +#define EFS0_PGM_TIMING 0xFFCC007C /* EFS0 Timing configuration register */ +#define USB0_FADDR 0xFFCC1000 /* USB0 Device Address in Peripheral Mode */ +#define USB0_POWER 0xFFCC1001 /* USB0 Power and Device Control */ +#define USB0_INTRTX 0xFFCC1002 /* USB0 Transmit Interrupt */ +#define USB0_INTRRX 0xFFCC1004 /* USB0 Receive Interrupts */ +#define USB0_INTRTXE 0xFFCC1006 /* USB0 Transmit Interrupt Enable */ +#define USB0_INTRRXE 0xFFCC1008 /* USB0 Receive Interrupt Enable */ +#define USB0_IRQ 0xFFCC100A /* USB0 USB Interrupts */ +#define USB0_IEN 0xFFCC100B /* USB0 USB Interrupt Enable */ +#define USB0_FRAME 0xFFCC100C /* USB0 Frame Number */ +#define USB0_INDEX 0xFFCC100E /* USB0 Index */ +#define USB0_TESTMODE 0xFFCC100F /* USB0 Testmodes */ +#define USB0_EPI_TXMAXP0 0xFFCC1010 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP0I_CSR0_H 0xFFCC1012 /* USB0 Config and Status EP0 */ +#define USB0_EPI_TXCSR0_H 0xFFCC1012 /* USB0 Transmit Configuration and Status */ +#define USB0_EP0I_CSR0_P 0xFFCC1012 /* USB0 Config and Status EP0 */ +#define USB0_EPI_TXCSR0_P 0xFFCC1012 /* USB0 Transmit Configuration and Status */ +#define USB0_EPI_RXMAXP0 0xFFCC1014 /* USB0 Receive Maximum Packet Length */ +#define USB0_EPI_RXCSR0_H 0xFFCC1016 /* USB0 Receive Configuration and Status Register */ +#define USB0_EPI_RXCSR0_P 0xFFCC1016 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP0I_CNT0 0xFFCC1018 /* USB0 Number of Received Bytes for Endpoint 0 */ +#define USB0_EPI_RXCNT0 0xFFCC1018 /* USB0 Number of Byte Received */ +#define USB0_EP0I_TYPE0 0xFFCC101A /* USB0 Speed for Endpoint 0 */ +#define USB0_EPI_TXTYPE0 0xFFCC101A /* USB0 Transmit Type */ +#define USB0_EP0I_NAKLIMIT0 0xFFCC101B /* USB0 NAK Response Timeout for Endpoint 0 */ +#define USB0_EPI_TXINTERVAL0 0xFFCC101B /* USB0 Transmit Polling Interval */ +#define USB0_EPI_RXTYPE0 0xFFCC101C /* USB0 Receive Type */ +#define USB0_EPI_RXINTERVAL0 0xFFCC101D /* USB0 Receive Polling Interval */ +#define USB0_EP0I_CFGDATA0 0xFFCC101F /* USB0 Configuration Information */ +#define USB0_FIFOB0 0xFFCC1020 /* USB0 FIFO Data */ +#define USB0_FIFOB1 0xFFCC1024 /* USB0 FIFO Data */ +#define USB0_FIFOB2 0xFFCC1028 /* USB0 FIFO Data */ +#define USB0_FIFOB3 0xFFCC102C /* USB0 FIFO Data */ +#define USB0_FIFOB4 0xFFCC1030 /* USB0 FIFO Data */ +#define USB0_FIFOB5 0xFFCC1034 /* USB0 FIFO Data */ +#define USB0_FIFOB6 0xFFCC1038 /* USB0 FIFO Data */ +#define USB0_FIFOB7 0xFFCC103C /* USB0 FIFO Data */ +#define USB0_FIFOB8 0xFFCC1040 /* USB0 FIFO Data */ +#define USB0_FIFOB9 0xFFCC1044 /* USB0 FIFO Data */ +#define USB0_FIFOB10 0xFFCC1048 /* USB0 FIFO Data */ +#define USB0_FIFOB11 0xFFCC104C /* USB0 FIFO Data */ +#define USB0_FIFOH0 0xFFCC1020 /* USB0 FIFO Data */ +#define USB0_FIFOH1 0xFFCC1024 /* USB0 FIFO Data */ +#define USB0_FIFOH2 0xFFCC1028 /* USB0 FIFO Data */ +#define USB0_FIFOH3 0xFFCC102C /* USB0 FIFO Data */ +#define USB0_FIFOH4 0xFFCC1030 /* USB0 FIFO Data */ +#define USB0_FIFOH5 0xFFCC1034 /* USB0 FIFO Data */ +#define USB0_FIFOH6 0xFFCC1038 /* USB0 FIFO Data */ +#define USB0_FIFOH7 0xFFCC103C /* USB0 FIFO Data */ +#define USB0_FIFOH8 0xFFCC1040 /* USB0 FIFO Data */ +#define USB0_FIFOH9 0xFFCC1044 /* USB0 FIFO Data */ +#define USB0_FIFOH10 0xFFCC1048 /* USB0 FIFO Data */ +#define USB0_FIFOH11 0xFFCC104C /* USB0 FIFO Data */ +#define USB0_FIFO0 0xFFCC1020 /* USB0 FIFO Data */ +#define USB0_FIFO1 0xFFCC1024 /* USB0 FIFO Data */ +#define USB0_FIFO2 0xFFCC1028 /* USB0 FIFO Data */ +#define USB0_FIFO3 0xFFCC102C /* USB0 FIFO Data */ +#define USB0_FIFO4 0xFFCC1030 /* USB0 FIFO Data */ +#define USB0_FIFO5 0xFFCC1034 /* USB0 FIFO Data */ +#define USB0_FIFO6 0xFFCC1038 /* USB0 FIFO Data */ +#define USB0_FIFO7 0xFFCC103C /* USB0 FIFO Data */ +#define USB0_FIFO8 0xFFCC1040 /* USB0 FIFO Data */ +#define USB0_FIFO9 0xFFCC1044 /* USB0 FIFO Data */ +#define USB0_FIFO10 0xFFCC1048 /* USB0 FIFO Data */ +#define USB0_FIFO11 0xFFCC104C /* USB0 FIFO Data */ +#define USB0_DEV_CTL 0xFFCC1060 /* USB0 Device Control */ +#define USB0_TXFIFOSZ 0xFFCC1062 /* USB0 Transmit FIFO Size */ +#define USB0_RXFIFOSZ 0xFFCC1063 /* USB0 Receive FIFO Size */ +#define USB0_TXFIFOADDR 0xFFCC1064 /* USB0 Transmit FIFO Address */ +#define USB0_RXFIFOADDR 0xFFCC1066 /* USB0 Receive FIFO Address */ +#define USB0_VENDSTAT 0xFFCC1068 /* USB0 Vendor Status */ +#define USB0_HWVERS 0xFFCC106C /* USB0 Hardware Version */ +#define USB0_EPINFO 0xFFCC1078 /* USB0 Endpoint Info */ +#define USB0_RAMINFO 0xFFCC1079 /* USB0 Ram Information */ +#define USB0_LINKINFO 0xFFCC107A /* USB0 Programmable Delay Values */ +#define USB0_VPLEN 0xFFCC107B /* USB0 VBus Pulse Duration */ +#define USB0_HS_EOF1 0xFFCC107C /* USB0 High Speed End of Frame Remaining */ +#define USB0_FS_EOF1 0xFFCC107D /* USB0 Full Speed End of Frame Remaining */ +#define USB0_LS_EOF1 0xFFCC107E /* USB0 Low Speed End of Frame Remaining */ +#define USB0_SOFT_RST 0xFFCC107F /* USB0 Software Reset */ +#define USB0_TXFUNCADDR0 0xFFCC1080 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR1 0xFFCC1088 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR2 0xFFCC1090 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR3 0xFFCC1098 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR4 0xFFCC10A0 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR5 0xFFCC10A8 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR6 0xFFCC10B0 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR7 0xFFCC10B8 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR8 0xFFCC10C0 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR9 0xFFCC10C8 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR10 0xFFCC10D0 /* USB0 Transmit Function Address */ +#define USB0_TXFUNCADDR11 0xFFCC10D8 /* USB0 Transmit Function Address */ +#define USB0_TXHUBADDR0 0xFFCC1082 /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR1 0xFFCC108A /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR2 0xFFCC1092 /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR3 0xFFCC109A /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR4 0xFFCC10A2 /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR5 0xFFCC10AA /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR6 0xFFCC10B2 /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR7 0xFFCC10BA /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR8 0xFFCC10C2 /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR9 0xFFCC10CA /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR10 0xFFCC10D2 /* USB0 Transmit Hub Address */ +#define USB0_TXHUBADDR11 0xFFCC10DA /* USB0 Transmit Hub Address */ +#define USB0_TXHUBPORT0 0xFFCC1083 /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT1 0xFFCC108B /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT2 0xFFCC1093 /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT3 0xFFCC109B /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT4 0xFFCC10A3 /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT5 0xFFCC10AB /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT6 0xFFCC10B3 /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT7 0xFFCC10BB /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT8 0xFFCC10C3 /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT9 0xFFCC10CB /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT10 0xFFCC10D3 /* USB0 Transmit Hub Port */ +#define USB0_TXHUBPORT11 0xFFCC10DB /* USB0 Transmit Hub Port */ +#define USB0_RXFUNCADDR0 0xFFCC1084 /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR1 0xFFCC108C /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR2 0xFFCC1094 /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR3 0xFFCC109C /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR4 0xFFCC10A4 /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR5 0xFFCC10AC /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR6 0xFFCC10B4 /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR7 0xFFCC10BC /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR8 0xFFCC10C4 /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR9 0xFFCC10CC /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR10 0xFFCC10D4 /* USB0 Receive Function Address */ +#define USB0_RXFUNCADDR11 0xFFCC10DC /* USB0 Receive Function Address */ +#define USB0_RXHUBADDR0 0xFFCC1086 /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR1 0xFFCC108E /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR2 0xFFCC1096 /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR3 0xFFCC109E /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR4 0xFFCC10A6 /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR5 0xFFCC10AE /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR6 0xFFCC10B6 /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR7 0xFFCC10BE /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR8 0xFFCC10C6 /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR9 0xFFCC10CE /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR10 0xFFCC10D6 /* USB0 Receive Hub Address */ +#define USB0_RXHUBADDR11 0xFFCC10DE /* USB0 Receive Hub Address */ +#define USB0_RXHUBPORT0 0xFFCC1087 /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT1 0xFFCC108F /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT2 0xFFCC1097 /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT3 0xFFCC109F /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT4 0xFFCC10A7 /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT5 0xFFCC10AF /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT6 0xFFCC10B7 /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT7 0xFFCC10BF /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT8 0xFFCC10C7 /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT9 0xFFCC10CF /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT10 0xFFCC10D7 /* USB0 Receive Hub Port */ +#define USB0_RXHUBPORT11 0xFFCC10DF /* USB0 Receive Hub Port */ +#define USB0_EP0_CSR0_H 0xFFCC1102 /* USB0 Config and Status EP0 */ +#define USB0_EP0_CSR0_P 0xFFCC1102 /* USB0 Config and Status EP0 */ +#define USB0_EP0_CNT0 0xFFCC1108 /* USB0 Number of Received Bytes for Endpoint 0 */ +#define USB0_EP0_TYPE0 0xFFCC110A /* USB0 Speed for Endpoint 0 */ +#define USB0_EP0_NAKLIMIT0 0xFFCC110B /* USB0 NAK Response Timeout for Endpoint 0 */ +#define USB0_EP0_CFGDATA0 0xFFCC110F /* USB0 Configuration Information */ +#define USB0_EP_TXMAXP0 0xFFCC1110 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP1 0xFFCC1120 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP2 0xFFCC1130 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP3 0xFFCC1140 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP4 0xFFCC1150 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP5 0xFFCC1160 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP6 0xFFCC1170 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP7 0xFFCC1180 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP8 0xFFCC1190 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP9 0xFFCC11A0 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXMAXP10 0xFFCC11B0 /* USB0 Transmit Maximum Packet Length */ +#define USB0_EP_TXCSR0_H 0xFFCC1112 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR1_H 0xFFCC1122 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR2_H 0xFFCC1132 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR3_H 0xFFCC1142 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR4_H 0xFFCC1152 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR5_H 0xFFCC1162 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR6_H 0xFFCC1172 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR7_H 0xFFCC1182 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR8_H 0xFFCC1192 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR9_H 0xFFCC11A2 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR10_H 0xFFCC11B2 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR0_P 0xFFCC1112 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR1_P 0xFFCC1122 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR2_P 0xFFCC1132 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR3_P 0xFFCC1142 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR4_P 0xFFCC1152 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR5_P 0xFFCC1162 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR6_P 0xFFCC1172 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR7_P 0xFFCC1182 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR8_P 0xFFCC1192 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR9_P 0xFFCC11A2 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_TXCSR10_P 0xFFCC11B2 /* USB0 Transmit Configuration and Status */ +#define USB0_EP_RXMAXP0 0xFFCC1114 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP1 0xFFCC1124 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP2 0xFFCC1134 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP3 0xFFCC1144 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP4 0xFFCC1154 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP5 0xFFCC1164 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP6 0xFFCC1174 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP7 0xFFCC1184 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP8 0xFFCC1194 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP9 0xFFCC11A4 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXMAXP10 0xFFCC11B4 /* USB0 Receive Maximum Packet Length */ +#define USB0_EP_RXCSR0_H 0xFFCC1116 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR1_H 0xFFCC1126 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR2_H 0xFFCC1136 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR3_H 0xFFCC1146 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR4_H 0xFFCC1156 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR5_H 0xFFCC1166 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR6_H 0xFFCC1176 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR7_H 0xFFCC1186 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR8_H 0xFFCC1196 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR9_H 0xFFCC11A6 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR10_H 0xFFCC11B6 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR0_P 0xFFCC1116 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR1_P 0xFFCC1126 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR2_P 0xFFCC1136 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR3_P 0xFFCC1146 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR4_P 0xFFCC1156 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR5_P 0xFFCC1166 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR6_P 0xFFCC1176 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR7_P 0xFFCC1186 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR8_P 0xFFCC1196 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR9_P 0xFFCC11A6 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCSR10_P 0xFFCC11B6 /* USB0 Receive Configuration and Status Register */ +#define USB0_EP_RXCNT0 0xFFCC1118 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT1 0xFFCC1128 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT2 0xFFCC1138 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT3 0xFFCC1148 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT4 0xFFCC1158 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT5 0xFFCC1168 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT6 0xFFCC1178 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT7 0xFFCC1188 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT8 0xFFCC1198 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT9 0xFFCC11A8 /* USB0 Number of Byte Received */ +#define USB0_EP_RXCNT10 0xFFCC11B8 /* USB0 Number of Byte Received */ +#define USB0_EP_TXTYPE0 0xFFCC111A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE1 0xFFCC112A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE2 0xFFCC113A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE3 0xFFCC114A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE4 0xFFCC115A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE5 0xFFCC116A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE6 0xFFCC117A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE7 0xFFCC118A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE8 0xFFCC119A /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE9 0xFFCC11AA /* USB0 Transmit Type */ +#define USB0_EP_TXTYPE10 0xFFCC11BA /* USB0 Transmit Type */ +#define USB0_EP_TXINTERVAL0 0xFFCC111B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL1 0xFFCC112B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL2 0xFFCC113B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL3 0xFFCC114B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL4 0xFFCC115B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL5 0xFFCC116B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL6 0xFFCC117B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL7 0xFFCC118B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL8 0xFFCC119B /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL9 0xFFCC11AB /* USB0 Transmit Polling Interval */ +#define USB0_EP_TXINTERVAL10 0xFFCC11BB /* USB0 Transmit Polling Interval */ +#define USB0_EP_RXTYPE0 0xFFCC111C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE1 0xFFCC112C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE2 0xFFCC113C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE3 0xFFCC114C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE4 0xFFCC115C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE5 0xFFCC116C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE6 0xFFCC117C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE7 0xFFCC118C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE8 0xFFCC119C /* USB0 Receive Type */ +#define USB0_EP_RXTYPE9 0xFFCC11AC /* USB0 Receive Type */ +#define USB0_EP_RXTYPE10 0xFFCC11BC /* USB0 Receive Type */ +#define USB0_EP_RXINTERVAL0 0xFFCC111D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL1 0xFFCC112D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL2 0xFFCC113D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL3 0xFFCC114D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL4 0xFFCC115D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL5 0xFFCC116D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL6 0xFFCC117D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL7 0xFFCC118D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL8 0xFFCC119D /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL9 0xFFCC11AD /* USB0 Receive Polling Interval */ +#define USB0_EP_RXINTERVAL10 0xFFCC11BD /* USB0 Receive Polling Interval */ +#define USB0_DMA_IRQ 0xFFCC1200 /* USB0 Interrupt Register */ +#define USB0_DMA_CTL0 0xFFCC1204 /* USB0 DMA Control */ +#define USB0_DMA_CTL1 0xFFCC1214 /* USB0 DMA Control */ +#define USB0_DMA_CTL2 0xFFCC1224 /* USB0 DMA Control */ +#define USB0_DMA_CTL3 0xFFCC1234 /* USB0 DMA Control */ +#define USB0_DMA_CTL4 0xFFCC1244 /* USB0 DMA Control */ +#define USB0_DMA_CTL5 0xFFCC1254 /* USB0 DMA Control */ +#define USB0_DMA_CTL6 0xFFCC1264 /* USB0 DMA Control */ +#define USB0_DMA_CTL7 0xFFCC1274 /* USB0 DMA Control */ +#define USB0_DMA_ADDR0 0xFFCC1208 /* USB0 DMA Address */ +#define USB0_DMA_ADDR1 0xFFCC1218 /* USB0 DMA Address */ +#define USB0_DMA_ADDR2 0xFFCC1228 /* USB0 DMA Address */ +#define USB0_DMA_ADDR3 0xFFCC1238 /* USB0 DMA Address */ +#define USB0_DMA_ADDR4 0xFFCC1248 /* USB0 DMA Address */ +#define USB0_DMA_ADDR5 0xFFCC1258 /* USB0 DMA Address */ +#define USB0_DMA_ADDR6 0xFFCC1268 /* USB0 DMA Address */ +#define USB0_DMA_ADDR7 0xFFCC1278 /* USB0 DMA Address */ +#define USB0_DMA_CNT0 0xFFCC120C /* USB0 DMA Count */ +#define USB0_DMA_CNT1 0xFFCC121C /* USB0 DMA Count */ +#define USB0_DMA_CNT2 0xFFCC122C /* USB0 DMA Count */ +#define USB0_DMA_CNT3 0xFFCC123C /* USB0 DMA Count */ +#define USB0_DMA_CNT4 0xFFCC124C /* USB0 DMA Count */ +#define USB0_DMA_CNT5 0xFFCC125C /* USB0 DMA Count */ +#define USB0_DMA_CNT6 0xFFCC126C /* USB0 DMA Count */ +#define USB0_DMA_CNT7 0xFFCC127C /* USB0 DMA Count */ +#define USB0_RQPKTCNT0 0xFFCC1300 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT1 0xFFCC1304 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT2 0xFFCC1308 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT3 0xFFCC130C /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT4 0xFFCC1310 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT5 0xFFCC1314 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT6 0xFFCC1318 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT7 0xFFCC131C /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT8 0xFFCC1320 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT9 0xFFCC1324 /* USB0 Request Packet Count */ +#define USB0_RQPKTCNT10 0xFFCC1328 /* USB0 Request Packet Count */ +#define USB0_CT_UCH 0xFFCC1344 /* USB0 Chirp Timeout */ +#define USB0_CT_HHSRTN 0xFFCC1346 /* USB0 High Speed Resume Return to Normal */ +#define USB0_CT_HSBT 0xFFCC1348 /* USB0 High Speed Timeout */ +#define USB0_LPM_ATTR 0xFFCC1360 /* USB0 LPM Attribute */ +#define USB0_LPM_CTL 0xFFCC1362 /* USB0 LPM Control */ +#define USB0_LPM_IEN 0xFFCC1363 /* USB0 LPM Interrupt Enable */ +#define USB0_LPM_IRQ 0xFFCC1364 /* USB0 LPM Interrupt */ +#define USB0_LPM_FADDR 0xFFCC1365 /* USB0 LPM Function Address */ +#define USB0_VBUS_CTL 0xFFCC1380 /* USB0 VBus Control */ +#define USB0_BAT_CHG 0xFFCC1381 /* USB0 Battery Charging */ +#define USB0_PHY_CTL 0xFFCC1394 /* USB0 PHY Control */ +#define USB0_TESTCTL 0xFFCC1397 /* USB0 Test Control */ +#define USB0_PLL_OSC 0xFFCC1398 /* USB0 PLL and Oscillator Control */ + +#define CHIPID 0xffc00014 +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +#define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000 -> 0xFF803FFF Data Bank A SRAM */ +#define L1_DATA_A_SRAM_SIZE 0x8000 +#define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE) +#define L1_DATA_B_SRAM 0xFF900000 /* 0xFF900000 -> 0xFF903FFF Data Bank B SRAM */ +#define L1_DATA_B_SRAM_SIZE 0x4000 +#define L1_DATA_B_SRAM_END (L1_DATA_B_SRAM + L1_DATA_B_SRAM_SIZE) + +#define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */ +#define L1_INST_SRAM_SIZE 0x8000 +#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) + +#endif /* __BFIN_DEF_ADSP_BF504_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf609/anomaly.h b/arch/blackfin/include/asm/mach-bf609/anomaly.h new file mode 100644 index 0000000..cfe1a1d --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/anomaly.h @@ -0,0 +1,128 @@ +/* + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE + * + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + */ + +/* This file should be up to date with: + */ + +#if __SILICON_REVISION__ < 0 +# error will not work on BF506 silicon version +#endif + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) +/* UART IrDA Receiver Fails on Extended Bit Pulses */ +#define ANOMALY_05000447 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000469 (1) +/* Incorrect Default MSEL Value in PLL_CTL */ +#define ANOMALY_05000472 (1) +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) +#define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) +#define ANOMALY_05000242 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) +#define ANOMALY_05000285 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) +#define ANOMALY_05000305 (0) +#define ANOMALY_05000307 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000353 (1) +#define ANOMALY_05000357 (0) +#define ANOMALY_05000362 (1) +#define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) +#define ANOMALY_05000371 (0) +#define ANOMALY_05000380 (0) +#define ANOMALY_05000386 (0) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) +#define ANOMALY_05000402 (0) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000432 (0) +#define ANOMALY_05000440 (0) +#define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) + +#endif diff --git a/arch/blackfin/include/asm/mach-bf609/def_local.h b/arch/blackfin/include/asm/mach-bf609/def_local.h new file mode 100644 index 0000000..d4250e6 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/def_local.h @@ -0,0 +1,5 @@ +#include "gpio.h" +#include "portmux.h" +#include "ports.h" + +#define CONFIG_BF60x 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf609/portmux.h b/arch/blackfin/include/asm/mach-bf609/portmux.h new file mode 100644 index 0000000..757570f --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/portmux.h @@ -0,0 +1,257 @@ +/* + * Copyright 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +/* EMAC RMII Port Mux */ +#define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0)) +#define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0)) +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_CRS, \ + P_MII0_MDC, \ + P_PTP0_PPS, \ + P_PTP1_PPS, \ + P_MII0_MDIO, 0} + +#define P_MII1_MDC (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0)) +#define P_MII1_MDIO (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0)) +#define P_MII1_ETxD0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_MII1_ERxD0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_MII1_ETxD1 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_MII1_ERxD1 (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0)) +#define P_MII1_ETxEN (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_MII1_PHYINT (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0)) +#define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) +#define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) +#define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) + +#define P_RMII1 {\ + P_MII1_ETxD0, \ + P_MII1_ETxD1, \ + P_MII1_ETxEN, \ + P_MII1_ERxD0, \ + P_MII1_ERxD1, \ + P_MII1_ERxER, \ + P_MII1_TxCLK, \ + P_MII1_PHYINT, \ + P_MII1_CRS, \ + P_MII1_MDC, \ + P_MII1_MDIO, 0} + +/* PPI Port Mux */ +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define P_PPI0_D16 (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1)) +#define P_PPI0_D17 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1)) +#define P_PPI0_D18 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1)) +#define P_PPI0_D19 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1)) +#define P_PPI0_D20 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1)) +#define P_PPI0_D21 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1)) +#define P_PPI0_D22 (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1)) +#define P_PPI0_D23 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1)) +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(1)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1)) + +#define P_PPI1_D0 (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(1)) +#define P_PPI1_D1 (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1)) +#define P_PPI1_D2 (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(1)) +#define P_PPI1_D3 (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(1)) +#define P_PPI1_D4 (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(1)) +#define P_PPI1_D5 (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1)) +#define P_PPI1_D6 (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(1)) +#define P_PPI1_D7 (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(1)) +#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(1)) +#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(1)) +#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(1)) +#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(1)) +#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(1)) +#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(1)) +#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(1)) +#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(1)) +#define P_PPI1_D16 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1)) +#define P_PPI1_D17 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1)) +#define P_PPI1_CLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(1)) +#define P_PPI1_FS1 (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(1)) +#define P_PPI1_FS2 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1)) +#define P_PPI1_FS3 (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(1)) + +#define P_PPI2_D0 (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(1)) +#define P_PPI2_D1 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1)) +#define P_PPI2_D2 (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(1)) +#define P_PPI2_D3 (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(1)) +#define P_PPI2_D4 (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(1)) +#define P_PPI2_D5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1)) +#define P_PPI2_D6 (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(1)) +#define P_PPI2_D7 (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(1)) +#define P_PPI2_D8 (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(1)) +#define P_PPI2_D9 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1)) +#define P_PPI2_D10 (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(1)) +#define P_PPI2_D11 (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(1)) +#define P_PPI2_D12 (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(1)) +#define P_PPI2_D13 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1)) +#define P_PPI2_D14 (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(1)) +#define P_PPI2_D15 (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(1)) +#define P_PPI2_D16 (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(1)) +#define P_PPI2_D17 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1)) +#define P_PPI2_CLK (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(1)) +#define P_PPI2_FS1 (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(1)) +#define P_PPI2_FS2 (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(1)) +#define P_PPI2_FS3 (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(1)) + +/* SPI Port Mux */ +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0)) +#define P_SPI0_RDY (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0)) +#define P_SPI0_D2 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0)) +#define P_SPI0_D3 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0)) + +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(0)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0)) + +#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3)) +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0)) +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0)) +#define P_SPI1_RDY (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) +#define P_SPI1_D2 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) +#define P_SPI1_D3 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) + +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0)) +#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2)) +#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2)) +#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2)) +#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_SPI1_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_SPI1_SSEL7 (P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(0)) + +#define GPIO_DEFAULT_BOOT_SPI_CS +#define P_DEFAULT_BOOT_SPI_CS + +/* UART Port Mux */ +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1)) +#define P_UART0_RTS (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1)) +#define P_UART0_CTS (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1)) + +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) + +/* Timer */ +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(3)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) + +/* RSI */ +#define P_RSI_DATA0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) +#define P_RSI_DATA1 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_RSI_DATA2 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(2)) +#define P_RSI_DATA3 (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(2)) +#define P_RSI_DATA4 (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(2)) +#define P_RSI_DATA5 (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(2)) +#define P_RSI_DATA6 (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(2)) +#define P_RSI_DATA7 (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(2)) +#define P_RSI_CMD (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) +#define P_RSI_CLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) + +/* PTP */ +#define P_PTP0_PPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0)) +#define P_PTP0_CLKIN (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2)) +#define P_PTP0_AUXIN (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2)) + +#define P_PTP1_PPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) +#define P_PTP1_CLKIN (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2)) +#define P_PTP1_AUXIN (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2)) + +/* SMC Port Mux */ +#define P_A3 (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) +#define P_A4 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) +#define P_A5 (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) +#define P_A6 (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0)) +#define P_A7 (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0)) +#define P_A8 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0)) +#define P_A9 (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0)) +#define P_A10 (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0)) +#define P_A11 (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0)) +#define P_A12 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0)) +#define P_A13 (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0)) +#define P_A14 (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0)) +#define P_A15 (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0)) +#define P_A16 (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0)) +#define P_A17 (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0)) +#define P_A18 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0)) +#define P_A19 (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0)) +#define P_A20 (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0)) +#define P_A21 (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0)) +#define P_A22 (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0)) +#define P_A23 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0)) +#define P_A24 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0)) +#define P_A25 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0)) +#define P_NORCK (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0)) + +#define P_AMS1 (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0)) +#define P_AMS2 (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0)) +#define P_AMS3 (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0)) + +#define P_ABE0 (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(1)) +#define P_ABE1 (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(1)) + +/* CAN */ +#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf609/ports.h b/arch/blackfin/include/asm/mach-bf609/ports.h new file mode 100644 index 0000000..b361c7b --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/ports.h @@ -0,0 +1,103 @@ +/* + * Port Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT__ +#define __BFIN_PERIPHERAL_PORT__ + +/* PORTx_MUX Masks */ +#define PORT_x_MUX_0_MASK 0x00000003 +#define PORT_x_MUX_1_MASK 0x0000000C +#define PORT_x_MUX_2_MASK 0x00000030 +#define PORT_x_MUX_3_MASK 0x000000C0 +#define PORT_x_MUX_4_MASK 0x00000300 +#define PORT_x_MUX_5_MASK 0x00000C00 +#define PORT_x_MUX_6_MASK 0x00003000 +#define PORT_x_MUX_7_MASK 0x0000C000 +#define PORT_x_MUX_8_MASK 0x00030000 +#define PORT_x_MUX_9_MASK 0x000C0000 +#define PORT_x_MUX_10_MASK 0x00300000 +#define PORT_x_MUX_11_MASK 0x00C00000 +#define PORT_x_MUX_12_MASK 0x03000000 +#define PORT_x_MUX_13_MASK 0x0C000000 +#define PORT_x_MUX_14_MASK 0x30000000 +#define PORT_x_MUX_15_MASK 0xC0000000 + +#define PORT_x_MUX_FUNC_1 (0x0) +#define PORT_x_MUX_FUNC_2 (0x1) +#define PORT_x_MUX_FUNC_3 (0x2) +#define PORT_x_MUX_FUNC_4 (0x3) +#define PORT_x_MUX_0_FUNC_1 (PORT_x_MUX_FUNC_1 << 0) +#define PORT_x_MUX_0_FUNC_2 (PORT_x_MUX_FUNC_2 << 0) +#define PORT_x_MUX_0_FUNC_3 (PORT_x_MUX_FUNC_3 << 0) +#define PORT_x_MUX_0_FUNC_4 (PORT_x_MUX_FUNC_4 << 0) +#define PORT_x_MUX_1_FUNC_1 (PORT_x_MUX_FUNC_1 << 2) +#define PORT_x_MUX_1_FUNC_2 (PORT_x_MUX_FUNC_2 << 2) +#define PORT_x_MUX_1_FUNC_3 (PORT_x_MUX_FUNC_3 << 2) +#define PORT_x_MUX_1_FUNC_4 (PORT_x_MUX_FUNC_4 << 2) +#define PORT_x_MUX_2_FUNC_1 (PORT_x_MUX_FUNC_1 << 4) +#define PORT_x_MUX_2_FUNC_2 (PORT_x_MUX_FUNC_2 << 4) +#define PORT_x_MUX_2_FUNC_3 (PORT_x_MUX_FUNC_3 << 4) +#define PORT_x_MUX_2_FUNC_4 (PORT_x_MUX_FUNC_4 << 4) +#define PORT_x_MUX_3_FUNC_1 (PORT_x_MUX_FUNC_1 << 6) +#define PORT_x_MUX_3_FUNC_2 (PORT_x_MUX_FUNC_2 << 6) +#define PORT_x_MUX_3_FUNC_3 (PORT_x_MUX_FUNC_3 << 6) +#define PORT_x_MUX_3_FUNC_4 (PORT_x_MUX_FUNC_4 << 6) +#define PORT_x_MUX_4_FUNC_1 (PORT_x_MUX_FUNC_1 << 8) +#define PORT_x_MUX_4_FUNC_2 (PORT_x_MUX_FUNC_2 << 8) +#define PORT_x_MUX_4_FUNC_3 (PORT_x_MUX_FUNC_3 << 8) +#define PORT_x_MUX_4_FUNC_4 (PORT_x_MUX_FUNC_4 << 8) +#define PORT_x_MUX_5_FUNC_1 (PORT_x_MUX_FUNC_1 << 10) +#define PORT_x_MUX_5_FUNC_2 (PORT_x_MUX_FUNC_2 << 10) +#define PORT_x_MUX_5_FUNC_3 (PORT_x_MUX_FUNC_3 << 10) +#define PORT_x_MUX_5_FUNC_4 (PORT_x_MUX_FUNC_4 << 10) +#define PORT_x_MUX_6_FUNC_1 (PORT_x_MUX_FUNC_1 << 12) +#define PORT_x_MUX_6_FUNC_2 (PORT_x_MUX_FUNC_2 << 12) +#define PORT_x_MUX_6_FUNC_3 (PORT_x_MUX_FUNC_3 << 12) +#define PORT_x_MUX_6_FUNC_4 (PORT_x_MUX_FUNC_4 << 12) +#define PORT_x_MUX_7_FUNC_1 (PORT_x_MUX_FUNC_1 << 14) +#define PORT_x_MUX_7_FUNC_2 (PORT_x_MUX_FUNC_2 << 14) +#define PORT_x_MUX_7_FUNC_3 (PORT_x_MUX_FUNC_3 << 14) +#define PORT_x_MUX_7_FUNC_4 (PORT_x_MUX_FUNC_4 << 14) +#define PORT_x_MUX_8_FUNC_1 (PORT_x_MUX_FUNC_1 << 16) +#define PORT_x_MUX_8_FUNC_2 (PORT_x_MUX_FUNC_2 << 16) +#define PORT_x_MUX_8_FUNC_3 (PORT_x_MUX_FUNC_3 << 16) +#define PORT_x_MUX_8_FUNC_4 (PORT_x_MUX_FUNC_4 << 16) +#define PORT_x_MUX_9_FUNC_1 (PORT_x_MUX_FUNC_1 << 18) +#define PORT_x_MUX_9_FUNC_2 (PORT_x_MUX_FUNC_2 << 18) +#define PORT_x_MUX_9_FUNC_3 (PORT_x_MUX_FUNC_3 << 18) +#define PORT_x_MUX_9_FUNC_4 (PORT_x_MUX_FUNC_4 << 18) +#define PORT_x_MUX_10_FUNC_1 (PORT_x_MUX_FUNC_1 << 20) +#define PORT_x_MUX_10_FUNC_2 (PORT_x_MUX_FUNC_2 << 20) +#define PORT_x_MUX_10_FUNC_3 (PORT_x_MUX_FUNC_3 << 20) +#define PORT_x_MUX_10_FUNC_4 (PORT_x_MUX_FUNC_4 << 20) +#define PORT_x_MUX_11_FUNC_1 (PORT_x_MUX_FUNC_1 << 22) +#define PORT_x_MUX_11_FUNC_2 (PORT_x_MUX_FUNC_2 << 22) +#define PORT_x_MUX_11_FUNC_3 (PORT_x_MUX_FUNC_3 << 22) +#define PORT_x_MUX_11_FUNC_4 (PORT_x_MUX_FUNC_4 << 22) +#define PORT_x_MUX_12_FUNC_1 (PORT_x_MUX_FUNC_1 << 24) +#define PORT_x_MUX_12_FUNC_2 (PORT_x_MUX_FUNC_2 << 24) +#define PORT_x_MUX_12_FUNC_3 (PORT_x_MUX_FUNC_3 << 24) +#define PORT_x_MUX_12_FUNC_4 (PORT_x_MUX_FUNC_4 << 24) +#define PORT_x_MUX_13_FUNC_1 (PORT_x_MUX_FUNC_1 << 26) +#define PORT_x_MUX_13_FUNC_2 (PORT_x_MUX_FUNC_2 << 26) +#define PORT_x_MUX_13_FUNC_3 (PORT_x_MUX_FUNC_3 << 26) +#define PORT_x_MUX_13_FUNC_4 (PORT_x_MUX_FUNC_4 << 26) +#define PORT_x_MUX_14_FUNC_1 (PORT_x_MUX_FUNC_1 << 28) +#define PORT_x_MUX_14_FUNC_2 (PORT_x_MUX_FUNC_2 << 28) +#define PORT_x_MUX_14_FUNC_3 (PORT_x_MUX_FUNC_3 << 28) +#define PORT_x_MUX_14_FUNC_4 (PORT_x_MUX_FUNC_4 << 28) +#define PORT_x_MUX_15_FUNC_1 (PORT_x_MUX_FUNC_1 << 30) +#define PORT_x_MUX_15_FUNC_2 (PORT_x_MUX_FUNC_2 << 30) +#define PORT_x_MUX_15_FUNC_3 (PORT_x_MUX_FUNC_3 << 30) +#define PORT_x_MUX_15_FUNC_4 (PORT_x_MUX_FUNC_4 << 30) + +#include "../mach-common/bits/ports-a.h" +#include "../mach-common/bits/ports-b.h" +#include "../mach-common/bits/ports-c.h" +#include "../mach-common/bits/ports-d.h" +#include "../mach-common/bits/ports-e.h" +#include "../mach-common/bits/ports-f.h" +#include "../mach-common/bits/ports-g.h" + +#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/cgu.h b/arch/blackfin/include/asm/mach-common/bits/cgu.h new file mode 100644 index 0000000..cdf7349 --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/cgu.h @@ -0,0 +1,80 @@ +/* + * CGU Masks + */ + +#ifndef __BFIN_PERIPHERAL_CGU__ +#define __BFIN_PERIPHERAL_CGU__ + +/* CGU_CTL Masks */ +#define DF (1 << 0) +#define MSEL (0x7f << MSEL_P) +#define WIDLE (1 << WIDLE_P) +#define LOCK (1 << LOCK_P) + +#define DF_P 0 +#define MSEL_P 8 +#define WIDLE_P 30 +#define LOCK_P 31 +#define MSEL_MASK 0x7F00 +#define DF_MASK 0x1 + +/* CGU_STAT Masks */ +#define PLLEN (1 << 0) +#define PLLBP (1 << 1) +#define PLLLK (1 << 2) +#define CLKSALGN (1 << 3) +#define CCBF0EN (1 << 4) +#define CCBF1EN (1 << 5) +#define SCBF0EN (1 << 6) +#define SCBF1EN (1 << 7) +#define DCBFEN (1 << 8) +#define OCBFEN (1 << 9) +#define ADRERR (1 << 16) +#define LWERR (1 << 17) +#define DIVERR (1 << 18) +#define WDFMSERR (1 << 19) +#define WDIVERR (1 << 20) +#define PLLLKERR (1 << 21) + +/* CGU_DIV Masks */ +#define CSEL (0x1f << CSEL_P) +#define S0SEL (3 << S0SEL_P) +#define SYSSEL (0x1f << SYSSEL_P) +#define S1SEL (3 << S1SEL_P) +#define DSEL (0x1f << DSEL_P) +#define OSEL (0x7f << OSEL_P) +#define ALGN (1 << ALGN_P) +#define UPDT (1 << UPDT_P) +#define LOCK (1 << LOCK_P) + +#define CSEL_P 0 +#define S0SEL_P 5 +#define SYSSEL_P 8 +#define S1SEL_P 13 +#define DSEL_P 16 +#define OSEL_P 22 +#define ALGN_P 29 +#define UPDT_P 30 +#define LOCK_P 31 + +/* CGU_CLKOUTSEL Masks */ +#define CLKOUTSEL (0xf << 0) +#define USBCLKSEL (0x3f << 16) +#define LOCK (1 << LOCK_P) + +#define LOCK_P 31 + +#define CLKOUTSEL_CLKIN 0x0 +#define CLKOUTSEL_CCLK 0x1 +#define CLKOUTSEL_SYSCLK 0x2 +#define CLKOUTSEL_SCLK0 0x3 +#define CLKOUTSEL_SCLK1 0x4 +#define CLKOUTSEL_DCLK 0x5 +#define CLKOUTSEL_USB_PLL 0x6 +#define CLKOUTSEL_OUTCLK 0x7 +#define CLKOUTSEL_USB_CLKIN 0x8 +#define CLKOUTSEL_WDOG 0x9 +#define CLKOUTSEL_PMON 0xA +#define CLKOUTSEL_GND 0xB + +#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/dde.h b/arch/blackfin/include/asm/mach-common/bits/dde.h new file mode 100644 index 0000000..d7ad991 --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/dde.h @@ -0,0 +1,88 @@ +/* + * Distributed DMA Engine (DDE) Masks + */ + +#ifndef __BFIN_PERIPHERAL_DDE__ +#define __BFIN_PERIPHERAL_DDE__ + +/* DMA_CONFIG Masks */ +#define DMAEN (1 << DMAEN_P) /* DMA Channel Enable */ +#define WNR (1 << WNR_P) /* Channel Direction (W/R*) */ +#define SYNC (1 << SYNC_P) /* Synchronize Work Unit Transitions */ +#define CADDR (1 << CADDR_P) /* Use Current Address */ +#define PSIZE (7 << PSIZE_P) /* Peripheral Word Size */ +#define PSIZE_1 (0 << PSIZE_P) +#define PSIZE_2 (1 << PSIZE_P) +#define PSIZE_4 (2 << PSIZE_P) +#define PSIZE_8 (3 << PSIZE_P) +#define MSIZE (7 << MSIZE_P) /* Memory Transfer Size */ +#define MSIZE_1 (0 << MSIZE_P) +#define MSIZE_2 (1 << MSIZE_P) +#define MSIZE_4 (2 << MSIZE_P) +#define MSIZE_8 (3 << MSIZE_P) +#define MSIZE_16 (4 << MSIZE_P) +#define MSIZE_32 (5 << MSIZE_P) +#define FLOW (7 << FLOW_P) /* Next Operation */ +#define FLOW_STOP (0 << FLOW_P) /* Stop Mode */ +#define FLOW_AUTO (1 << FLOW_P) /* Autobuffer Mode */ +#define FLOW_DSCL (4 << FLOW_P) /* Descriptor List */ +#define FLOW_DSCA (5 << FLOW_P) /* Descriptor Array */ +#define FLOW_DSDL (6 << FLOW_P) /* Descriptor On Demand List */ +#define FLOW_DSDA (7 << FLOW_P) /* Descriptor On Demand Array */ +#define NDSIZE (7 << NDSIZE_P) /* Next Descriptor Set Size */ +#define NDSIZE_1 (0 << NDSIZE_P) +#define NDSIZE_2 (1 << NDSIZE_P) +#define NDSIZE_3 (2 << NDSIZE_P) +#define NDSIZE_4 (3 << NDSIZE_P) +#define NDSIZE_5 (4 << NDSIZE_P) +#define NDSIZE_6 (5 << NDSIZE_P) +#define NDSIZE_7 (6 << NDSIZE_P) +#define DI_EN_X (1 << INT_P) +#define DI_EN_Y (2 << INT_P) +#define DI_EN_P (3 << INT_P) +#define DI_EN (DI_EN_X) +#define DI_XCOUNT_EN (1 << INT_P) /* xcount expires interrupt */ +#define TRIG (3 << TRIG_P) /* Generate Trigger */ +#define TOVEN (1 << TOVEN_P) +#define DESCIDCPY (1 << DESCIDCPY_P) +#define TWOD (1 << TWOD_P) +#define PDRF (1 << PDRF_P) + +#define DMAEN_P 0 +#define WNR_P 1 +#define SYNC_P 2 +#define CADDR_P 3 +#define PSIZE_P 4 +#define MSIZE_P 8 +#define FLOW_P 12 +#define TWAIT_P 15 +#define NDSIZE_P 16 +#define INT_P 20 +#define TRIG_P 22 +#define TOVEN_P 24 +#define DESCIDCPY_P 25 +#define TWOD_P 26 +#define PDRF_P 28 + +/* DMA_STATUS Masks */ +#define DMA_DONE (1 << DMA_DONE_P) /* Work Unit/Row Done Interrupt */ +#define DMA_ERR (1 << DMA_ERR_P) /* Error Interrupt */ +#define DMA_PIRQ (1 << DMA_PIRQ_P) /* Peripheral Interrupt Request */ +#define DMA_ERRC (7 << DMA_ERRC_P) /* Error Cause */ +#define DMA_RUN (7 << DMA_RUN_P) /* Run Status */ +#define DMA_PBWIDTH (3 << DMA_PBWIDTH_P) /* Peripheral Bus Width */ +#define DMA_MBWIDTH (3 << DMA_MBWIDTH_P) /* Memory Bus Width */ +#define DMA_FIFOFILL (7 << DMA_FIFOFILL_P) /* FIFO Fill Status */ +#define DMA_TWAIT (1 << DMA_TWAIT_P) /* Trigger Wait Status */ + +#define DMA_DONE_P 0 +#define DMA_ERR_P 1 +#define DMA_PIRQ_P 2 +#define DMA_ERRC_P 4 +#define DMA_RUN_P 8 +#define DMA_PBWIDTH_P 12 +#define DMA_MBWIDTH_P 14 +#define DMA_FIFOFILL_P 16 +#define DMA_TWAIT_P 20 + +#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/mpu.h b/arch/blackfin/include/asm/mach-common/bits/mpu.h index 39998f8..d067ef9 100644 --- a/arch/blackfin/include/asm/mach-common/bits/mpu.h +++ b/arch/blackfin/include/asm/mach-common/bits/mpu.h @@ -70,7 +70,11 @@ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ #define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ -#define PAGE_SIZE_MASK 0x00030000 /* the bits for the page_size field */ +#define PAGE_SIZE_16KB 0x00040000 /* 16 KB page size */ +#define PAGE_SIZE_64KB 0x00050000 /* 64 KB page size */ +#define PAGE_SIZE_16MB 0x00060000 /* 16 MB page size */ +#define PAGE_SIZE_64MB 0x00070000 /* 64 MB page size */ +#define PAGE_SIZE_MASK 0x00070000 /* the bits for the page_size field */ #define PAGE_SIZE_SHIFT 16 #define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not mapped to L1 */ #define CPLB_PORTPRIO 0x00000200 /* 0=low priority port, 1= high priority port */ diff --git a/arch/blackfin/include/asm/mach-common/bits/pll.h b/arch/blackfin/include/asm/mach-common/bits/pll.h index 9009f26..fe0ba0f 100644 --- a/arch/blackfin/include/asm/mach-common/bits/pll.h +++ b/arch/blackfin/include/asm/mach-common/bits/pll.h @@ -16,6 +16,8 @@ #define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ #define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */
+#define MSEL_P 9 + /* PLL_DIV Masks */ #define SSEL 0x000F /* System Select */ #define CSEL 0x0030 /* Core Select */ @@ -29,6 +31,9 @@ #define CCLK_DIV4 CSEL_DIV4 #define CCLK_DIV8 CSEL_DIV8
+#define SSEL_P 0 +#define CSEL_P 4 + /* PLL_STAT Masks */ #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ #define FULL_ON 0x0002 /* Processor In Full On Mode */
From: Sonic Zhang sonic.zhang@analog.com
Add serial for bf60x.
Signed-off-by: Sonic Zhang sonic.zhang@analog.com Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/cpu/serial.c | 81 +++--- arch/blackfin/cpu/serial.h | 222 ++-------------- arch/blackfin/cpu/serial1.h | 275 ++++++++++++++++++++ arch/blackfin/cpu/serial4.h | 139 ++++++++++ arch/blackfin/include/asm/mach-common/bits/uart4.h | 66 +++++ 5 files changed, 545 insertions(+), 238 deletions(-) create mode 100644 arch/blackfin/cpu/serial1.h create mode 100644 arch/blackfin/cpu/serial4.h create mode 100644 arch/blackfin/include/asm/mach-common/bits/uart4.h
diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c index 6603dc0..7d4dad9 100644 --- a/arch/blackfin/cpu/serial.c +++ b/arch/blackfin/cpu/serial.c @@ -43,7 +43,6 @@ #include <serial.h> #include <linux/compiler.h> #include <asm/blackfin.h> -#include <asm/mach-common/bits/uart.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -52,8 +51,8 @@ DECLARE_GLOBAL_DATA_PTR; #include "serial.h"
#ifdef CONFIG_DEBUG_SERIAL -static uint16_t cached_lsr[256]; -static uint16_t cached_rbr[256]; +static uart_lsr_t cached_lsr[256]; +static uart_lsr_t cached_rbr[256]; static size_t cache_count;
/* The LSR is read-to-clear on some parts, so we have to make sure status @@ -61,10 +60,10 @@ static size_t cache_count; * works around anomaly 05000099 at the same time by keeping a cumulative * tally of all the status bits. */ -static uint16_t uart_lsr_save; -static uint16_t uart_lsr_read(uint32_t uart_base) +static uart_lsr_t uart_lsr_save; +static uart_lsr_t uart_lsr_read(uint32_t uart_base) { - uint16_t lsr = bfin_read(&pUART->lsr); + uart_lsr_t lsr = _lsr_read(pUART); uart_lsr_save |= (lsr & (OE|PE|FE|BI)); return lsr | uart_lsr_save; } @@ -72,20 +71,20 @@ static uint16_t uart_lsr_read(uint32_t uart_base) static void uart_lsr_clear(uint32_t uart_base) { uart_lsr_save = 0; - bfin_write(&pUART->lsr, bfin_read(&pUART->lsr) | -1); + _lsr_write(pUART, -1); } #else /* When debugging is disabled, we only care about the DR bit, so if other * bits get set/cleared, we don't really care since we don't read them * anyways (and thus anomaly 05000099 is irrelevant). */ -static inline uint16_t uart_lsr_read(uint32_t uart_base) +static inline uart_lsr_t uart_lsr_read(uint32_t uart_base) { - return bfin_read(&pUART->lsr); + return _lsr_read(pUART); } static void uart_lsr_clear(uint32_t uart_base) { - bfin_write(&pUART->lsr, bfin_read(&pUART->lsr) | -1); + _lsr_write(pUART, -1); } #endif
@@ -127,20 +126,14 @@ static int uart_getc(uint32_t uart_base)
#ifdef CONFIG_DEBUG_SERIAL /* grab & clear the LSR */ - uint16_t uart_lsr_val = uart_lsr_read(uart_base); + uart_lsr_t uart_lsr_val = uart_lsr_read(uart_base);
cached_lsr[cache_count] = uart_lsr_val; cached_rbr[cache_count] = uart_rbr_val; cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr);
if (uart_lsr_val & (OE|PE|FE|BI)) { - uint16_t dll, dlh; printf("\n[SERIAL ERROR]\n"); - ACCESS_LATCH(); - dll = bfin_read(&pUART->dll); - dlh = bfin_read(&pUART->dlh); - ACCESS_PORT_IER(); - printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh); do { --cache_count; printf("\t%3zu: RBR=0x%02x LSR=0x%02x\n", cache_count, @@ -160,6 +153,8 @@ static int uart_getc(uint32_t uart_base) # define LOOP(x) #endif
+#if BFIN_UART_HW_VER < 4 + LOOP( static void uart_loop(uint32_t uart_base, int state) { @@ -178,6 +173,28 @@ static void uart_loop(uint32_t uart_base, int state) } )
+#else + +LOOP( +static void uart_loop(uint32_t uart_base, int state) +{ + u32 control; + + /* Drain the TX fifo first so bytes don't come back */ + while (!(uart_lsr_read(uart_base) & TEMT)) + continue; + + control = bfin_read(&pUART->control); + if (state) + control |= LOOP_ENA | MRTS; + else + control &= ~(LOOP_ENA | MRTS); + bfin_write(&pUART->control, control); +} +) + +#endif + #ifdef CONFIG_SYS_BFIN_UART
static void uart_puts(uint32_t uart_base, const char *s) @@ -246,16 +263,16 @@ struct serial_device bfin_serial##n##_device = { \ LOOP(.loop = uart##n##_loop) \ };
-#ifdef UART0_DLL +#ifdef UART0_RBR DECL_BFIN_UART(0) #endif -#ifdef UART1_DLL +#ifdef UART1_RBR DECL_BFIN_UART(1) #endif -#ifdef UART2_DLL +#ifdef UART2_RBR DECL_BFIN_UART(2) #endif -#ifdef UART3_DLL +#ifdef UART3_RBR DECL_BFIN_UART(3) #endif
@@ -274,16 +291,16 @@ __weak struct serial_device *default_serial_console(void)
void serial_register_bfin_uart(void) { -#ifdef UART0_DLL +#ifdef UART0_RBR serial_register(&bfin_serial0_device); #endif -#ifdef UART1_DLL +#ifdef UART1_RBR serial_register(&bfin_serial1_device); #endif -#ifdef UART2_DLL +#ifdef UART2_RBR serial_register(&bfin_serial2_device); #endif -#ifdef UART3_DLL +#ifdef UART3_RBR serial_register(&bfin_serial3_device); #endif } @@ -293,7 +310,7 @@ void serial_register_bfin_uart(void) /* Symbol for our assembly to call. */ void serial_set_baud(uint32_t baud) { - serial_early_set_baud(UART_DLL, baud); + serial_early_set_baud(UART_BASE, baud); }
/* Symbol for common u-boot code to call. @@ -307,7 +324,7 @@ void serial_setbrg(void) /* Symbol for our assembly to call. */ void serial_initialize(void) { - serial_early_init(UART_DLL); + serial_early_init(UART_BASE); }
/* Symbol for common u-boot code to call. */ @@ -315,23 +332,23 @@ int serial_init(void) { serial_initialize(); serial_setbrg(); - uart_lsr_clear(UART_DLL); + uart_lsr_clear(UART_BASE); return 0; }
int serial_tstc(void) { - return uart_tstc(UART_DLL); + return uart_tstc(UART_BASE); }
int serial_getc(void) { - return uart_getc(UART_DLL); + return uart_getc(UART_BASE); }
void serial_putc(const char c) { - uart_putc(UART_DLL, c); + uart_putc(UART_BASE, c); }
void serial_puts(const char *s) @@ -343,7 +360,7 @@ void serial_puts(const char *s) LOOP( void serial_loop(int state) { - uart_loop(UART_DLL, state); + uart_loop(UART_BASE, state); } )
diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h index 8a076dd..9200339 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/cpu/serial.h @@ -3,7 +3,7 @@ * any functions defined here must be always_inline since * initcode cannot have function calls. * - * Copyright (c) 2004-2007 Analog Devices Inc. + * Copyright (c) 2004-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -12,7 +12,7 @@ #define __BFIN_CPU_SERIAL_H__
#include <asm/blackfin.h> -#include <asm/mach-common/bits/uart.h> +#include <asm/portmux.h>
#ifndef CONFIG_UART_CONSOLE # define CONFIG_UART_CONSOLE 0 @@ -24,88 +24,34 @@ # define BFIN_DEBUG_EARLY_SERIAL 0 #endif
-#ifndef __ASSEMBLY__ - -#include <asm/portmux.h> - -#define LOB(x) ((x) & 0xFF) -#define HIB(x) (((x) >> 8) & 0xFF) - -#if defined(__ADSPBF50x__) || defined(__ADSPBF54x__) +#if defined(__ADSPBF60x__) +# define BFIN_UART_HW_VER 4 +#elif defined(__ADSPBF50x__) || defined(__ADSPBF54x__) # define BFIN_UART_HW_VER 2 #else # define BFIN_UART_HW_VER 1 #endif
-/* - * All Blackfin system MMRs are padded to 32bits even if the register - * itself is only 16bits. So use a helper macro to streamline this. - */ -#define __BFP(m) u16 m; u16 __pad_##m -struct bfin_mmr_serial { -#if BFIN_UART_HW_VER == 2 - __BFP(dll); - __BFP(dlh); - __BFP(gctl); - __BFP(lcr); - __BFP(mcr); - __BFP(lsr); - __BFP(msr); - __BFP(scr); - __BFP(ier_set); - __BFP(ier_clear); - __BFP(thr); - __BFP(rbr); -#else - union { - u16 dll; - u16 thr; - const u16 rbr; - }; - const u16 __spad0; - union { - u16 dlh; - u16 ier; - }; - const u16 __spad1; - const __BFP(iir); - __BFP(lcr); - __BFP(mcr); - __BFP(lsr); - __BFP(msr); - __BFP(scr); - const u32 __spad2; - __BFP(gctl); -#endif -}; -#undef __BFP - #define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx #define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx) -#define MMR_UART(n) _PASTE_UART(n, UART, DLL) #define _P_UART(n, pin) _PASTE_UART(n, P_UART, pin) #define P_UART(pin) _P_UART(CONFIG_UART_CONSOLE, pin)
-#ifndef UART_DLL -# define UART_DLL MMR_UART(CONFIG_UART_CONSOLE) -#else -# define UART0_DLL UART_DLL -# if CONFIG_UART_CONSOLE != 0 -# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART -# endif -#endif #define pUART ((volatile struct bfin_mmr_serial *)uart_base)
-#if BFIN_UART_HW_VER == 2 -# define ACCESS_LATCH() -# define ACCESS_PORT_IER() +#ifndef __ASSEMBLY__ +__attribute__((always_inline)) +static inline void serial_do_portmux(void); +#endif + +#if BFIN_UART_HW_VER < 4 +# include "serial1.h" #else -# define ACCESS_LATCH() \ - bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) | DLAB) -# define ACCESS_PORT_IER() \ - bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) & ~DLAB) +# include "serial4.h" #endif
+#ifndef __ASSEMBLY__ + __attribute__((always_inline)) static inline void serial_do_portmux(void) { @@ -115,143 +61,7 @@ static inline void serial_do_portmux(void) return; }
-#if defined(__ADSPBF50x__) -# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_1 | PORT_x_MUX_##mux_rx##_FUNC_1); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 7, 7, 12, 13); break; /* Port G; mux 7; PG12 and PG13 */ - case 1: DO_MUX(F, 3, 3, 6, 7); break; /* Port F; mux 3; PF6 and PF7 */ - } - SSYNC(); -#elif defined(__ADSPBF51x__) -# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */ - case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */ - } - SSYNC(); -#elif defined(__ADSPBF52x__) -# define DO_MUX(port, mux, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */ - case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */ - } - SSYNC(); -#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) - const uint16_t func[] = { PFDE, PFTE, }; - bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]); - bfin_write_PORTF_FER(bfin_read_PORTF_FER() | - (1 << P_IDENT(P_UART(RX))) | - (1 << P_IDENT(P_UART(TX)))); - SSYNC(); -#elif defined(__ADSPBF54x__) -# define DO_MUX(port, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */ - case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */ - case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */ - case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ - } - SSYNC(); -#elif defined(__ADSPBF561__) - /* UART pins could be GPIO, but they aren't pin muxed. */ -#else -# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) -# error "missing portmux logic for UART" -# endif -#endif -} - -__attribute__((always_inline)) -static inline int uart_init(uint32_t uart_base) -{ - /* always enable UART -- avoids anomalies 05000309 and 05000350 */ - bfin_write(&pUART->gctl, UCEN); - - /* Set LCR to Word Lengh 8-bit word select */ - bfin_write(&pUART->lcr, WLS_8); - - SSYNC(); - - return 0; -} - -__attribute__((always_inline)) -static inline int serial_early_init(uint32_t uart_base) -{ - /* handle portmux crap on different Blackfins */ - serial_do_portmux(); - - return uart_init(uart_base); -} - -__attribute__((always_inline)) -static inline int serial_early_uninit(uint32_t uart_base) -{ - /* disable the UART by clearing UCEN */ - bfin_write(&pUART->gctl, 0); - - return 0; -} - -__attribute__((always_inline)) -static inline void serial_early_put_div(uint32_t uart_base, uint16_t divisor) -{ - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - /* Program the divisor to get the baud rate we want */ - bfin_write(&pUART->dll, LOB(divisor)); - bfin_write(&pUART->dlh, HIB(divisor)); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); -} - -__attribute__((always_inline)) -static inline uint16_t serial_early_get_div(void) -{ - uint32_t uart_base = UART_DLL; - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - uint8_t dll = bfin_read(&pUART->dll); - uint8_t dlh = bfin_read(&pUART->dlh); - uint16_t divisor = (dlh << 8) | dll; - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); - - return divisor; -} - -/* We cannot use get_sclk() early on as it uses caches in external memory */ -#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) -# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV) -#endif - -__attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) -{ - /* Translate from baud into divisor in terms of SCLK. The - * weird multiplication is to make sure we over sample just - * a little rather than under sample the incoming signals. - */ - serial_early_put_div(uart_base, - (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); + serial_early_do_portmux(); }
#ifndef BFIN_IN_INITCODE diff --git a/arch/blackfin/cpu/serial1.h b/arch/blackfin/cpu/serial1.h new file mode 100644 index 0000000..986494d --- /dev/null +++ b/arch/blackfin/cpu/serial1.h @@ -0,0 +1,275 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL1_H__ +#define __BFIN_CPU_SERIAL1_H__ + +#include <asm/mach-common/bits/uart.h> + +#ifndef __ASSEMBLY__ + +#define MMR_UART(n) _PASTE_UART(n, UART, DLL) +#ifdef UART_DLL +# define UART0_DLL UART_DLL +# if CONFIG_UART_CONSOLE != 0 +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART +# endif +#endif +#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) + +#define LOB(x) ((x) & 0xFF) +#define HIB(x) (((x) >> 8) & 0xFF) + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m +struct bfin_mmr_serial { +#if BFIN_UART_HW_VER == 2 + __BFP(dll); + __BFP(dlh); + __BFP(gctl); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + __BFP(ier_set); + __BFP(ier_clear); + __BFP(thr); + __BFP(rbr); +#else + union { + u16 dll; + u16 thr; + const u16 rbr; + }; + const u16 __spad0; + union { + u16 dlh; + u16 ier; + }; + const u16 __spad1; + const __BFP(iir); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + const u32 __spad2; + __BFP(gctl); +#endif +}; +#undef __BFP + +typedef uint16_t uart_lsr_t; +#define _lsr_read(p) bfin_read(&p->lsr) +#define _lsr_write(p, v) bfin_write(&p->lsr, v) + +#if BFIN_UART_HW_VER == 2 +# define ACCESS_LATCH() +# define ACCESS_PORT_IER() +#else +# define ACCESS_LATCH() bfin_write_or(&pUART->lcr, DLAB) +# define ACCESS_PORT_IER() bfin_write_and(&pUART->lcr, ~DLAB) +#endif + +__attribute__((always_inline)) +static inline void serial_early_do_portmux(void) +{ +#if defined(__ADSPBF50x__) +# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_1 | PORT_x_MUX_##mux_rx##_FUNC_1); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: + DO_MUX(G, 7, 7, 12, 13); + break; /* Port G; mux 7; PG12 and PG13 */ + case 1: + DO_MUX(F, 3, 3, 6, 7); + break; /* Port F; mux 3; PF6 and PF7 */ + } + SSYNC(); +#elif defined(__ADSPBF51x__) +# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: + DO_MUX(G, 5, 5, 9, 10); + break; /* Port G; mux 5; PG9 and PG10 */ + case 1: + DO_MUX(F, 2, 3, 14, 15); + break; /* Port H; mux 2/3; PH14 and PH15 */ + } + SSYNC(); +#elif defined(__ADSPBF52x__) +# define DO_MUX(port, mux, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: + DO_MUX(G, 2, 7, 8); + break; /* Port G; mux 2; PG2 and PG8 */ + case 1: + DO_MUX(F, 5, 14, 15); + break; /* Port F; mux 5; PF14 and PF15 */ + } + SSYNC(); +#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) + const uint16_t func[] = { PFDE, PFTE, }; + bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]); + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | + (1 << P_IDENT(P_UART(RX))) | + (1 << P_IDENT(P_UART(TX)))); + SSYNC(); +#elif defined(__ADSPBF54x__) +# define DO_MUX(port, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: + DO_MUX(E, 7, 8); + break; /* Port E; PE7 and PE8 */ + case 1: + DO_MUX(H, 0, 1); + break; /* Port H; PH0 and PH1 */ + case 2: + DO_MUX(B, 4, 5); + break; /* Port B; PB4 and PB5 */ + case 3: + DO_MUX(B, 6, 7); + break; /* Port B; PB6 and PB7 */ + } + SSYNC(); +#elif defined(__ADSPBF561__) + /* UART pins could be GPIO, but they aren't pin muxed. */ +#else +# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) +# error "missing portmux logic for UART" +# endif +#endif +} + +__attribute__((always_inline)) +static inline uint32_t uart_sclk(void) +{ +#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) + /* We cannot use get_sclk() early on as it uses caches in external memory */ + return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV; +#else + return get_sclk(); +#endif +} + +__attribute__((always_inline)) +static inline int uart_init(uint32_t uart_base) +{ + /* always enable UART -- avoids anomalies 05000309 and 05000350 */ + bfin_write(&pUART->gctl, UCEN); + + /* Set LCR to Word Lengh 8-bit word select */ + bfin_write(&pUART->lcr, WLS_8); + + SSYNC(); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UCEN */ + bfin_write(&pUART->gctl, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_enabled(uint32_t uart_base) +{ + return bfin_read(&pUART->gctl) & UCEN; +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. The + * weird multiplication is to make sure we over sample just + * a little rather than under sample the incoming signals. + */ + uint16_t divisor = (uart_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->dll, LOB(divisor)); + bfin_write(&pUART->dlh, HIB(divisor)); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint16_t divisor) +{ + uint32_t uart_base = UART_BASE; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->dll, LOB(divisor)); + bfin_write(&pUART->dlh, HIB(divisor)); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint16_t serial_early_get_div(void) +{ + uint32_t uart_base = UART_BASE; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + uint8_t dll = bfin_read(&pUART->dll); + uint8_t dlh = bfin_read(&pUART->dlh); + uint16_t divisor = (dlh << 8) | dll; + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); + + return divisor; +} + +#endif + +#endif diff --git a/arch/blackfin/cpu/serial4.h b/arch/blackfin/cpu/serial4.h new file mode 100644 index 0000000..d84de58 --- /dev/null +++ b/arch/blackfin/cpu/serial4.h @@ -0,0 +1,139 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL4_H__ +#define __BFIN_CPU_SERIAL4_H__ + +#include <asm/mach-common/bits/uart4.h> + +#ifndef __ASSEMBLY__ + +#define MMR_UART(n) _PASTE_UART(n, UART, REVID) +#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) + +struct bfin_mmr_serial { + u32 revid; + u32 control; + u32 status; + u32 scr; + u32 clock; + u32 emask; + u32 emaskst; + u32 emaskcl; + u32 rbr; + u32 thr; + u32 taip; + u32 tsr; + u32 rsr; + u32 txdiv_cnt; + u32 rxdiv_cnt; +}; +typedef uint32_t uart_lsr_t; +#define _lsr_read(p) bfin_read(&p->status) +#define _lsr_write(p, v) bfin_write(&p->status, v) + +__attribute__((always_inline)) +static inline void serial_early_do_portmux(void) +{ +#if defined(__ADSPBF60x__) +# define DO_MUX(port, tx, rx, func) do \ +{\ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_##func | PORT_x_MUX_##rx##_FUNC_##func); \ + bfin_write_PORT##port##_FER_SET(P##port##tx | P##port##rx);\ +} while (0) + switch (CONFIG_UART_CONSOLE) { + case 0: + DO_MUX(D, 7, 8, 2); + break; /* Port D; PD7 and PD8; function 2 */ + case 1: + DO_MUX(G, 15, 14, 1); + break; /* Port G; PG15 and PH14; function 1 */ + } + SSYNC(); +#else +# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) +# error "missing portmux logic for UART" +# endif +#endif +} + +__attribute__((always_inline)) +static inline uint32_t uart_sclk(void) +{ +#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) + /* We cannot use get_sclk() early on as it uses caches in external memory */ + return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV / CONFIG_SCLK0_DIV; +#else + return get_sclk0(); +#endif +} + +__attribute__((always_inline)) +static inline int uart_init(uint32_t uart_base) +{ + /* always enable UART to 8-bit mode */ + bfin_write(&pUART->control, UEN | UMOD_UART | WLS_8); + + SSYNC(); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UEN */ + bfin_write(&pUART->control, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_enabled(uint32_t uart_base) +{ + return bfin_read(&pUART->control) & UEN; +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + uint32_t divisor = uart_sclk() / (baud * 16); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->clock, divisor); + SSYNC(); +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint32_t divisor) +{ + uint32_t uart_base = UART_BASE; + bfin_write(&pUART->clock, divisor); +} + +__attribute__((always_inline)) +static inline uint32_t serial_early_get_div(void) +{ + uint32_t uart_base = UART_BASE; + return bfin_read(&pUART->clock); +} + +#endif + +#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/uart4.h b/arch/blackfin/include/asm/mach-common/bits/uart4.h new file mode 100644 index 0000000..37808de --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/uart4.h @@ -0,0 +1,66 @@ +/* + * UART4 Masks + */ + +#ifndef __BFIN_PERIPHERAL_UART4__ +#define __BFIN_PERIPHERAL_UART4__ + +/* UART_CONTROL */ +#define UEN (1 << 0) +#define LOOP_ENA (1 << 1) +#define UMOD (3 << 4) +#define UMOD_UART (0 << 4) +#define UMOD_MDB (1 << 4) +#define UMOD_IRDA (1 << 4) +#define WLS (3 << 8) +#define WLS_5 (0 << 8) +#define WLS_6 (1 << 8) +#define WLS_7 (2 << 8) +#define WLS_8 (3 << 8) +#define STB (1 << 12) +#define STBH (1 << 13) +#define PEN (1 << 14) +#define EPS (1 << 15) +#define STP (1 << 16) +#define FPE (1 << 17) +#define FFE (1 << 18) +#define SB (1 << 19) +#define FCPOL (1 << 22) +#define RPOLC (1 << 23) +#define TPOLC (1 << 24) +#define MRTS (1 << 25) +#define XOFF (1 << 26) +#define ARTS (1 << 27) +#define ACTS (1 << 28) +#define RFIT (1 << 29) +#define RFRT (1 << 30) + +/* UART_STATUS */ +#define DR (1 << 0) +#define OE (1 << 1) +#define PE (1 << 2) +#define FE (1 << 3) +#define BI (1 << 4) +#define THRE (1 << 5) +#define TEMT (1 << 7) +#define TFI (1 << 8) +#define ASTKY (1 << 9) +#define ADDR (1 << 10) +#define RO (1 << 11) +#define SCTS (1 << 12) +#define CTS (1 << 16) +#define RFCS (1 << 17) + +/* UART_EMASK */ +#define ERBFI (1 << 0) +#define ETBEI (1 << 1) +#define ELSI (1 << 2) +#define EDSSI (1 << 3) +#define EDTPTI (1 << 4) +#define ETFI (1 << 5) +#define ERFCI (1 << 6) +#define EAWI (1 << 7) +#define ERXS (1 << 8) +#define ETXS (1 << 9) + +#endif
Add dma support for bf60x.
Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/include/asm/dma.h | 113 ++++++++++++---------- arch/blackfin/include/asm/mach-common/bits/dma.h | 48 ++++++++- arch/blackfin/lib/string.c | 97 ++++++++++--------- 3 files changed, 159 insertions(+), 99 deletions(-)
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index 21ff1cf..211719a 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -8,68 +8,77 @@ #ifndef _BLACKFIN_DMA_H_ #define _BLACKFIN_DMA_H_
+#include <linux/types.h> +#ifdef __ADSPBF60x__ +#include <asm/mach-common/bits/dde.h> +#else #include <asm/mach-common/bits/dma.h> +#endif
struct dmasg_large { void *next_desc_addr; - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + u32 start_addr; + u16 cfg; + u16 x_count; + s16 x_modify; + u16 y_count; + s16 y_modify; } __attribute__((packed));
struct dmasg { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + u32 start_addr; + u16 cfg; + u16 x_count; + s16 x_modify; + u16 y_count; + s16 y_modify; } __attribute__((packed));
+/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) m; u16 __pad_##m struct dma_register { - void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ - unsigned long start_addr; /* DMA Start address register */ - - unsigned short cfg; /* DMA Configuration register */ - unsigned short dummy1; /* DMA Configuration register */ - - unsigned long reserved; - - unsigned short x_count; /* DMA x_count register */ - unsigned short dummy2; - - short x_modify; /* DMA x_modify register */ - unsigned short dummy3; - - unsigned short y_count; /* DMA y_count register */ - unsigned short dummy4; - - short y_modify; /* DMA y_modify register */ - unsigned short dummy5; - - void *curr_desc_ptr; /* DMA Current Descriptor Pointer - register */ - unsigned long curr_addr_ptr; /* DMA Current Address Pointer - register */ - unsigned short irq_status; /* DMA irq status register */ - unsigned short dummy6; - - unsigned short peripheral_map; /* DMA peripheral map register */ - unsigned short dummy7; - - unsigned short curr_x_count; /* DMA Current x-count register */ - unsigned short dummy8; - - unsigned long reserved2; - - unsigned short curr_y_count; /* DMA Current y-count register */ - unsigned short dummy9; - - unsigned long reserved3; - +#ifdef __ADSPBF60x__ + void *next_desc_ptr; + u32 start_addr; + u32 config; + u32 x_count; + s32 x_modify; + u32 y_count; + s32 y_modify; + u32 __pad0[2]; + void *curr_desc_ptr; + void *prev_desc_ptr; + void *curr_addr; + u32 status; + u32 curr_x_count; + u32 curr_y_count; + u32 __pad1[2]; + u32 bw_limit; + u32 curr_bw_limit; + u32 bw_monitor; + u32 curr_bw_monitor; +#else + void *next_desc_ptr; + u32 start_addr; + u16 __BFP(config); + u32 __pad0; + u16 __BFP(x_count); + s16 __BFP(x_modify); + u16 __BFP(y_count); + s16 __BFP(y_modify); + void *curr_desc_ptr; + u32 curr_addr_ptr; + u16 __BFP(status); + u16 __BFP(peripheral_map); + u16 __BFP(curr_x_count); + u32 __pad1; + u16 __BFP(curr_y_count); + u32 __pad2; +#endif }; +#undef __BFP
#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/dma.h b/arch/blackfin/include/asm/mach-common/bits/dma.h index 136313e..1126c44 100644 --- a/arch/blackfin/include/asm/mach-common/bits/dma.h +++ b/arch/blackfin/include/asm/mach-common/bits/dma.h @@ -9,8 +9,48 @@ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ + +#ifdef CONFIG_BF60x + +#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */ +#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */ +#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */ +#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */ +#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */ +#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */ +#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */ +#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */ +#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */ +#define DI_EN_X 0x00100000 /* Data Interrupt Enable in X count */ +#define DI_EN_Y 0x00200000 /* Data Interrupt Enable in Y count */ +#define DI_EN_P 0x00300000 /* Data Interrupt Enable in Peripheral */ +#define DI_EN DI_EN_X /* Data Interrupt Enable */ +#define NDSIZE_0 0x00000000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x00010000 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x00020000 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x00030000 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x00040000 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x00050000 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x00060000 /* Next Descriptor Size = 6 */ +#define NDSIZE 0x00070000 /* Next Descriptor Size */ +#define NDSIZE_OFFSET 16 /* Next Descriptor Size Offset */ +#define DMAFLOW_LIST 0x00004000 /* Descriptor List Mode */ +#define DMAFLOW_ARRAY 0x00005000 /* Descriptor Array Mode */ +#define DMAFLOW_LIST_DEMAND 0x00006000 /* Descriptor Demand List Mode */ +#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Descriptor Demand Array Mode */ +#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Running Indicator (DFETCH) */ +#define DMA_RUN 0x00000200 /* DMA Channel Running Indicator */ +#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Running Indicator (WAIT TRIG) */ +#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Running Indicator (WAIT ACK) */ + +#else + #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define PSIZE_16 WDSIZE_16 +#define PSIZE_32 WDSIZE_32 #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define RESTART 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ @@ -26,14 +66,13 @@ #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define FLOW_STOP 0x0000 /* Stop Mode */ -#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ #define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
#define DMAEN_P 0 /* Channel Enable */ #define WNR_P 1 /* Channel Direction (W/R*) */ +#define WDSIZE_P 2 /* Transfer Word Size */ #define DMA2D_P 4 /* 2D/1D* Mode */ #define RESTART_P 5 /* Restart */ #define DI_SEL_P 6 /* Data Interrupt Select */ @@ -45,6 +84,11 @@ #define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ #define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
+#endif +#define DMAFLOW 0x7000 /* Flow Control */ +#define FLOW_STOP 0x0000 /* Stop Mode */ +#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ + #define DMA_DONE_P 0 /* DMA Done Indicator */ #define DMA_ERR_P 1 /* DMA Error Indicator */ #define DFETCH_P 2 /* Descriptor Fetch Indicator */ diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c index e344d3b..44d8c6d 100644 --- a/arch/blackfin/lib/string.c +++ b/arch/blackfin/lib/string.c @@ -29,7 +29,7 @@ #include <config.h> #include <asm/blackfin.h> #include <asm/io.h> -#include <asm/mach-common/bits/dma.h> +#include <asm/dma.h>
char *strcpy(char *dest, const char *src) { @@ -117,81 +117,88 @@ int strncmp(const char *cs, const char *ct, size_t count) return __res1; }
-#ifdef bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR -# define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA1_D0_X_COUNT -# define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA1_D0_X_MODIFY -# define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA1_D0_CONFIG -# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR -# define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA1_S0_X_COUNT -# define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA1_S0_X_MODIFY -# define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA1_S0_CONFIG -# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA1_D0_IRQ_STATUS +#ifdef MDMA1_D0_NEXT_DESC_PTR +# define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR +# define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR #endif + +static void dma_calc_size(unsigned long ldst, unsigned long lsrc, size_t count, + unsigned long *dshift, unsigned long *bpos) +{ + unsigned long limit; + +#ifdef MSIZE + limit = 6; + *dshift = MSIZE_P; +#else + limit = 3; + *dshift = WDSIZE_P; +#endif + + *bpos = min(limit, ffs(ldst | lsrc | count)) - 1; +} + /* This version misbehaves for count values of 0 and 2^16+. * Perhaps we should detect that ? Nowhere do we actually * use dma memcpy for those types of lengths though ... */ void dma_memcpy_nocache(void *dst, const void *src, size_t count) { - uint16_t wdsize, mod; + struct dma_register *mdma_d0 = (void *)MDMA_D0_NEXT_DESC_PTR; + struct dma_register *mdma_s0 = (void *)MDMA_S0_NEXT_DESC_PTR; + unsigned long ldst = (unsigned long)dst; + unsigned long lsrc = (unsigned long)src; + unsigned long dshift, bpos; + uint32_t dsize, mod;
/* Disable DMA in case it's still running (older u-boot's did not * always turn them off). Do it before the if statement below so * we can be cheap and not do a SSYNC() due to the forced abort. */ - bfin_write_MDMA_D0_CONFIG(0); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write(&mdma_d0->config, 0); + bfin_write(&mdma_s0->config, 0); + bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR);
/* Scratchpad cannot be a DMA source or destination */ - if (((unsigned long)src >= L1_SRAM_SCRATCH && - (unsigned long)src < L1_SRAM_SCRATCH_END) || - ((unsigned long)dst >= L1_SRAM_SCRATCH && - (unsigned long)dst < L1_SRAM_SCRATCH_END)) + if ((lsrc >= L1_SRAM_SCRATCH && lsrc < L1_SRAM_SCRATCH_END) || + (ldst >= L1_SRAM_SCRATCH && ldst < L1_SRAM_SCRATCH_END)) hang();
- if (((unsigned long)dst | (unsigned long)src | count) & 0x1) { - wdsize = WDSIZE_8; - mod = 1; - } else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) { - wdsize = WDSIZE_16; - count >>= 1; - mod = 2; - } else { - wdsize = WDSIZE_32; - count >>= 2; - mod = 4; - } + dma_calc_size(ldst, lsrc, count, &dshift, &bpos); + dsize = bpos << dshift; + count >>= bpos; + mod = 1 << bpos; + +#ifdef PSIZE + dsize |= min(3, bpos) << PSIZE_P; +#endif
/* Copy sram functions from sdram to sram */ /* Setup destination start address */ - bfin_write_MDMA_D0_START_ADDR(dst); + bfin_write(&mdma_d0->start_addr, ldst); /* Setup destination xcount */ - bfin_write_MDMA_D0_X_COUNT(count); + bfin_write(&mdma_d0->x_count, count); /* Setup destination xmodify */ - bfin_write_MDMA_D0_X_MODIFY(mod); + bfin_write(&mdma_d0->x_modify, mod);
/* Setup Source start address */ - bfin_write_MDMA_S0_START_ADDR(src); + bfin_write(&mdma_s0->start_addr, lsrc); /* Setup Source xcount */ - bfin_write_MDMA_S0_X_COUNT(count); + bfin_write(&mdma_s0->x_count, count); /* Setup Source xmodify */ - bfin_write_MDMA_S0_X_MODIFY(mod); + bfin_write(&mdma_s0->x_modify, mod);
/* Enable source DMA */ - bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN); - bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN); + bfin_write(&mdma_s0->config, dsize | DMAEN); + bfin_write(&mdma_d0->config, dsize | DMAEN | WNR | DI_EN); SSYNC();
- while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + while (!(bfin_read(&mdma_d0->status) & DMA_DONE)) continue;
- bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); - bfin_write_MDMA_D0_CONFIG(0); - bfin_write_MDMA_S0_CONFIG(0); + bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write(&mdma_d0->config, 0); + bfin_write(&mdma_s0->config, 0); } /* We should do a dcache invalidate on the destination after the dma, but since * we lack such hardware capability, we'll flush/invalidate the destination
Bf60x support 16K, 64K, 16M and 64M cplb pages, this patch add support for them. So that bf609-ezkit can use it's 128M memory.
Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/include/asm/cplb.h | 17 +++++++++++------ arch/blackfin/lib/board.c | 27 ++++++++++++++++++++------- 2 files changed, 31 insertions(+), 13 deletions(-)
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index cc21e93..afdc920 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -45,9 +45,14 @@ #define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID #define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL
-/* Data Attibutes*/ +#if defined(__ADSPBF60x__) +#define PAGE_SIZE (PAGE_SIZE_16MB) +#else +#define PAGE_SIZE (PAGE_SIZE_4MB) +#endif
-#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +/* Data Attibutes*/ +#define SDRAM_IGENERIC (PAGE_SIZE | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) #define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) @@ -59,18 +64,18 @@ #endif
#ifdef CONFIG_DCACHE_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#define SDRAM_DGENERIC (PAGE_SIZE | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158_WORKAROUND) #define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#define SDRAM_EBIU (PAGE_SIZE | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
#else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#define SDRAM_DGENERIC (PAGE_SIZE | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158_WORKAROUND) #define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#define SDRAM_EBIU (PAGE_SIZE | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #endif
#endif /* _CPLB_H */ diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index c380d27..32c5fc9 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -94,12 +94,12 @@ static void display_global_data(void) printf(" \-bi_flashoffset: %lx\n", bd->bi_flashoffset); }
-#define CPLB_PAGE_SIZE (4 * 1024 * 1024) -#define CPLB_PAGE_MASK (~(CPLB_PAGE_SIZE - 1)) void init_cplbtables(void) { volatile uint32_t *ICPLB_ADDR, *ICPLB_DATA; volatile uint32_t *DCPLB_ADDR, *DCPLB_DATA; + uint32_t cplb_page_size; + uint32_t cplb_page_mask; uint32_t extern_memory; size_t i;
@@ -127,12 +127,19 @@ void init_cplbtables(void) icplb_add(0xFFA00000, L1_IMEMORY); dcplb_add(0xFF800000, L1_DMEMORY); ++i; +#if defined(__ADSPBF60x__) + icplb_add(0x0, 0x0); + dcplb_add(CONFIG_SYS_FLASH_BASE, SDRAM_EBIU); + ++i; +#endif + cplb_page_size = (4 * 1024 * 1024); + cplb_page_mask = (~(cplb_page_size - 1));
if (CONFIG_MEM_SIZE) { uint32_t mbase = CONFIG_SYS_MONITOR_BASE; uint32_t mend = mbase + CONFIG_SYS_MONITOR_LEN; - mbase &= CPLB_PAGE_MASK; - mend &= CPLB_PAGE_MASK; + mbase &= cplb_page_mask; + mend &= cplb_page_mask;
icplb_add(mbase, SDRAM_IKERNEL); dcplb_add(mbase, SDRAM_DKERNEL); @@ -150,9 +157,11 @@ void init_cplbtables(void) } }
+#ifndef __ADSPBF60x__ icplb_add(0x20000000, SDRAM_INON_CHBL); dcplb_add(0x20000000, SDRAM_EBIU); ++i; +#endif
/* Add entries for the rest of external RAM up to the bootrom */ extern_memory = 0; @@ -163,14 +172,18 @@ void init_cplbtables(void) ++i; icplb_add(extern_memory, SDRAM_IKERNEL); dcplb_add(extern_memory, SDRAM_DKERNEL); - extern_memory += CPLB_PAGE_SIZE; + extern_memory += cplb_page_size; ++i; #endif
- while (i < 16 && extern_memory < (CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK)) { +#if defined(__ADSPBF60x__) + cplb_page_size = (16 * 1024 * 1024); + cplb_page_mask = (~(cplb_page_size - 1)); +#endif + while (i < 16 && extern_memory < (CONFIG_SYS_MONITOR_BASE & cplb_page_mask)) { icplb_add(extern_memory, SDRAM_IGENERIC); dcplb_add(extern_memory, SDRAM_DGENERIC); - extern_memory += CPLB_PAGE_SIZE; + extern_memory += cplb_page_size; ++i; } while (i < 16) {
From: Sonic Zhang sonic.zhang@analog.com
Add rsi/sdh support for bf60x.
Signed-off-by: Sonic Zhang sonic.zhang@analog.com Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/include/asm/mach-common/bits/sdh.h | 38 +++++++++++- drivers/mmc/bfin_sdh.c | 68 +++++++++++++++++----- 2 files changed, 88 insertions(+), 18 deletions(-)
diff --git a/arch/blackfin/include/asm/mach-common/bits/sdh.h b/arch/blackfin/include/asm/mach-common/bits/sdh.h index 8c5dd33..3495558 100644 --- a/arch/blackfin/include/asm/mach-common/bits/sdh.h +++ b/arch/blackfin/include/asm/mach-common/bits/sdh.h @@ -12,18 +12,35 @@ #define CMD_INT_E 0x100 /* Command Interrupt */ #define CMD_PEND_E 0x200 /* Command Pending */ #define CMD_E 0x400 /* Command Enable */ +#ifdef RSI_BLKSZ +#define CMD_CRC_CHECK_D 0x800 /* CRC Check is disabled */ +#define CMD_DATA0_BUSY 0x1000 /* Check for Busy State on the DATA0 pin */ +#endif
/* Bit masks for SDH_PWR_CTL */ +#ifndef RSI_BLKSZ #define PWR_ON 0x3 /* Power On */ #define SD_CMD_OD 0x40 /* Open Drain Output */ #define ROD_CTL 0x80 /* Rod Control */ +#endif
/* Bit masks for SDH_CLK_CTL */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ #define PWR_SV_E 0x200 /* Power Save Enable */ #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ +#define BUS_MODE_MASK 0x1800 /* Bus Mode Mask */ +#define STD_BUS_1 0x000 /* Standard Bus 1 bit mode */ +#define WIDE_BUS_4 0x800 /* Wide Bus 4 bit mode */ +#define BYTE_BUS_8 0x1000 /* Byte Bus 8 bit mode */ +#ifdef RSI_BLKSZ +#define CARD_TYPE_MASK 0xe000 /* Card type mask */ +#define CARD_TYPE_OFFSET 13 /* Card type offset */ +#define CARD_TYPE_SDIO 0 +#define CARD_TYPE_eMMC 1 +#define CARD_TYPE_SD 2 +#define CARD_TYPE_CEATA 3 +#endif
/* Bit masks for SDH_RESP_CMD */ #define RESP_CMD 0x3f /* Response Command */ @@ -33,7 +50,13 @@ #define DTX_DIR 0x2 /* Data Transfer Direction */ #define DTX_MODE 0x4 /* Data Transfer Mode */ #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#ifndef RSI_BLKSZ #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ +#else + +/* Bit masks for SDH_BLK_SIZE */ +#define DTX_BLK_LGTH 0x1fff /* Data Transfer Block Length */ +#endif
/* Bit masks for SDH_STATUS */ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ @@ -102,10 +125,13 @@ /* Bit masks for SDH_E_STATUS */ #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ #define SD_CARD_DET 0x10 /* SD Card Detect */ +#define SD_CARD_BUSYMODE 0x80000000 /* Card is in Busy mode */ +#define SD_CARD_SLPMODE 0x40000000 /* Card in Sleep Mode */ +#define SD_CARD_READY 0x00020000 /* Card Ready */
/* Bit masks for SDH_E_MASK */ #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ +#define SCD_MSK 0x10 /* Mask Card Detect */
/* Bit masks for SDH_CFG */ #define CLKS_EN 0x1 /* Clocks Enable */ @@ -114,7 +140,15 @@ #define SD_RST 0x10 /* SDMMC Reset */ #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#ifndef RSI_BLKSZ #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ +#else +#define PWR_ON 0x600 /* Power On */ +#define SD_CMD_OD 0x800 /* Open Drain Output */ +#define BOOT_EN 0x1000 /* Boot Enable */ +#define BOOT_MODE 0x2000 /* Alternate Boot Mode */. +#define BOOT_ACK_EN 0x4000 /* Boot ACK is expected */ +#endif
/* Bit masks for SDH_RD_WAIT_EN */ #define RWR 0x1 /* Read Wait Request */ diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index 8d59d46..f22429a 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -19,9 +19,7 @@ #include <asm/mach-common/bits/sdh.h> #include <asm/mach-common/bits/dma.h>
-#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) -# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CONTROL -# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CONTROL +#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF60x__) # define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CONTROL # define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CONTROL # define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT @@ -38,10 +36,21 @@ # define bfin_write_SDH_STATUS_CLR bfin_write_RSI_STATUSCL # define bfin_read_SDH_CFG bfin_read_RSI_CONFIG # define bfin_write_SDH_CFG bfin_write_RSI_CONFIG +# if defined(__ADSPBF60x__) +# define bfin_read_SDH_BLK_SIZE bfin_read_RSI_BLKSZ +# define bfin_write_SDH_BLK_SIZE bfin_write_RSI_BLKSZ +# define bfin_write_DMA_START_ADDR bfin_write_DMA10_START_ADDR +# define bfin_write_DMA_X_COUNT bfin_write_DMA10_X_COUNT +# define bfin_write_DMA_X_MODIFY bfin_write_DMA10_X_MODIFY +# define bfin_write_DMA_CONFIG bfin_write_DMA10_CONFIG +# else +# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CONTROL +# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CONTROL # define bfin_write_DMA_START_ADDR bfin_write_DMA4_START_ADDR # define bfin_write_DMA_X_COUNT bfin_write_DMA4_X_COUNT # define bfin_write_DMA_X_MODIFY bfin_write_DMA4_X_MODIFY # define bfin_write_DMA_CONFIG bfin_write_DMA4_CONFIG +# endif # define PORTMUX_PINS \ { P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0 } #elif defined(__ADSPBF54x__) @@ -70,6 +79,9 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd) sdh_cmd |= CMD_RSP; if (flags & MMC_RSP_136) sdh_cmd |= CMD_L_RSP; +#ifdef RSI_BLKSZ + sdh_cmd |= CMD_DATA0_BUSY; +#endif
bfin_write_SDH_ARGUMENT(arg); bfin_write_SDH_COMMAND(sdh_cmd); @@ -104,6 +116,12 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT | CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT); +#ifdef RSI_BLKSZ + /* wait till card ready */ + while (!(bfin_read_RSI_ESTAT() & SD_CARD_READY)) + ; + bfin_write_RSI_ESTAT(SD_CARD_READY); +#endif
return ret; } @@ -113,16 +131,19 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) { u16 data_ctl = 0; u16 dma_cfg = 0; - int ret = 0; unsigned long data_size = data->blocksize * data->blocks;
/* Don't support write yet. */ if (data->flags & MMC_DATA_WRITE) return UNUSABLE_ERR; +#ifndef RSI_BLKSZ data_ctl |= ((ffs(data_size) - 1) << 4); +#else + bfin_write_SDH_BLK_SIZE(data_size); +#endif data_ctl |= DTX_DIR; bfin_write_SDH_DATA_CTL(data_ctl); - dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN; + dma_cfg = WDSIZE_32 | PSIZE_32 | RESTART | WNR | DMAEN;
bfin_write_SDH_DATA_TIMER(-1);
@@ -137,7 +158,7 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) /* kick off transfer */ bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
- return ret; + return 0; }
@@ -147,13 +168,23 @@ static int bfin_sdh_request(struct mmc *mmc, struct mmc_cmd *cmd, u32 status; int ret = 0;
+ if (data) { + ret = sdh_setup_data(mmc, data); + if (ret) + return ret; + } + ret = sdh_send_cmd(mmc, cmd); if (ret) { + bfin_write_SDH_COMMAND(0); + bfin_write_DMA_CONFIG(0); + bfin_write_SDH_DATA_CTL(0); + SSYNC(); printf("sending CMD%d failed\n", cmd->cmdidx); return ret; } + if (data) { - ret = sdh_setup_data(mmc, data); do { udelay(1); status = bfin_read_SDH_STATUS(); @@ -208,10 +239,12 @@ static void bfin_sdh_set_ios(struct mmc *mmc)
if (mmc->bus_width == 4) { cfg = bfin_read_SDH_CFG(); - cfg &= ~0x80; - cfg |= 0x40; +#ifndef RSI_BLKSZ + cfg &= ~PD_SDDAT3; +#endif + cfg |= PUP_SDDAT3; bfin_write_SDH_CFG(cfg); - clk_ctl |= WIDE_BUS; + clk_ctl |= WIDE_BUS_4; } bfin_write_SDH_CLK_CTL(clk_ctl); sdh_set_clk(mmc->clock); @@ -220,20 +253,23 @@ static void bfin_sdh_set_ios(struct mmc *mmc) static int bfin_sdh_init(struct mmc *mmc) { const unsigned short pins[] = PORTMUX_PINS; - u16 pwr_ctl = 0; + int ret;
/* Initialize sdh controller */ - peripheral_request_list(pins, "bfin_sdh"); + ret = peripheral_request_list(pins, "bfin_sdh"); + if (ret < 0) + return ret; #if defined(__ADSPBF54x__) bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); #endif bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); /* Disable card detect pin */ bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60); - - pwr_ctl |= ROD_CTL; - pwr_ctl |= PWR_ON; - bfin_write_SDH_PWR_CTL(pwr_ctl); +#ifndef RSI_BLKSZ + bfin_write_SDH_PWR_CTL(PWR_ON | ROD_CTL); +#else + bfin_write_SDH_CFG(bfin_read_SDH_CFG() | PWR_ON); +#endif return 0; }
From: Sonic Zhang sonic.zhang@analog.com
Set up soft switch pins properly in board init code.
Signed-off-by: Sonic Zhang sonic.zhang@analog.com Signed-off-by: Bob Liu lliubbo@gmail.com --- board/bf609-ezkit/soft_switch.c | 169 +++++++++++++++++++++++++++++++++++++++ board/bf609-ezkit/soft_switch.h | 71 ++++++++++++++++ 2 files changed, 240 insertions(+) create mode 100644 board/bf609-ezkit/soft_switch.c create mode 100644 board/bf609-ezkit/soft_switch.h
diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c new file mode 100644 index 0000000..1e83e1d --- /dev/null +++ b/board/bf609-ezkit/soft_switch.c @@ -0,0 +1,169 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include <i2c.h> +#include "soft_switch.h" + +#define SWITCH_ADDR 0x21 + +#define NUM_SWITCH 3 +#define IODIRA 0x0 +#define IODIRB 0x1 +#define OLATA 0x14 +#define OLATB 0x15 + +struct switch_config { + uchar dir0; /* IODIRA */ + uchar dir1; /* IODIRB */ + uchar value0; /* OLATA */ + uchar value1; /* OLATB */ +}; + +static struct switch_config switch_config_array[NUM_SWITCH] = { + { +/* + U45 Port A U45 Port B + + 7--------------- RMII_CLK_EN | 7--------------- ~TEMP_THERM_EN + | 6------------- ~CNT0ZM_EN | | 6------------- ~TEMP_IRQ_EN + | | 5----------- ~CNT0DG_EN | | | 5----------- ~UART0CTS_146_EN + | | | 4--------- ~CNT0UD_EN | | | | 4--------- ~UART0CTS_RST_EN + | | | | 3------- ~CAN0RX_EN | | | | | 3------- ~UART0CTS_RTS_LPBK + | | | | | 2----- ~CAN0_ERR_EN | | | | | | 2----- ~UART0CTS_EN + | | | | | | 1--- ~CAN_STB | | | | | | | 1--- ~UART0RX_EN + | | | | | | | 0- CAN_EN | | | | | | | | 0- ~UART0RTS_EN + | | | | | | | | | | | | | | | | | + O O O O O O O O | O O O O O O O O ( I/O direction ) + 1 0 0 0 0 0 1 1 | 1 1 1 1 1 0 0 0 ( value being set ) +*/ + .dir0 = 0x0, /* all output */ + .dir1 = 0x0, /* all output */ + .value0 = RMII_CLK_EN | CAN_STB | CAN_EN, + .value1 = TEMP_THERM_EN | TEMP_IRQ_EN | UART0CTS_146_EN + | UART0CTS_RST_EN | UART0CTS_RTS_LPBK, + }, + { +/* + U46 Port A U46 Port B + + 7--------------- ~LED4_GPIO_EN | 7--------------- EMPTY + | 6------------- ~LED3_GPIO_EN | | 6------------- ~SPI0D3_EN + | | 5----------- ~LED2_GPIO_EN | | | 5----------- ~SPI0D2_EN + | | | 4--------- ~LED1_GPIO_EN | | | | 4--------- ~SPIFLASH_CS_EN + | | | | 3------- SMC0_LP0_EN | | | | | 3------- ~SD_WP_EN + | | | | | 2----- EMPTY | | | | | | 2----- ~SD_CD_EN + | | | | | | 1--- SMC0_EPPI2_LP1_SWITCH | | | | | | | 1--- ~PUSHBUTTON2_EN + | | | | | | | 0- OVERRIDE_SMC0_LP0_BOOT| | | | | | | | 0- ~PUSHBUTTON1_EN + | | | | | | | | | | | | | | | | | + O O O O O O O O | O O O O O O O O ( I/O direction ) + 0 0 0 0 0 X 0 1 | X 0 0 0 0 0 0 0 ( value being set ) +*/ + .dir0 = 0x0, /* all output */ + .dir1 = 0x0, /* all output */ +#ifdef CONFIG_BFIN_LINKPORT + .value0 = OVERRIDE_SMC0_LP0_BOOT, +#else + .value0 = SMC0_EPPI2_LP1_SWITCH, +#endif + .value1 = 0x0, + }, + { +/* + U47 Port A U47 Port B + + 7--------------- ~PD2_SPI0MISO_EI3_EN | 7--------------- EMPTY + | 6------------- ~PD1_SPI0D3_EPPI1D17_SPI0SEL2_EI3_EN | | 6------------- EMPTY + | | 5----------- ~PD0_SPI0D2_EPPI1D16_SPI0SEL3_EI3_EN | | | 5----------- EMPTY + | | | 4--------- ~WAKE_PUSHBUTTON_EN | | | | 4--------- EMPTY + | | | | 3------- ~ETHERNET_EN | | | | | 3------- EMPTY + | | | | | 2----- PHYAD0 | | | | | | 2----- EMPTY + | | | | | | 1--- PHY_PWR_DWN_INT | | | | | | | 1--- ~PD4_SPI0CK_EI3_EN + | | | | | | | 0- ~PHYINT_EN | | | | | | | | 0- ~PD3_SPI0MOSI_EI3_EN + | | | | | | | | | | | | | | | | | + O O O O O I I O | O O O O O O O O ( I/O direction ) + 1 1 1 0 0 0 0 0 | X X X X X X 1 1 ( value being set ) +*/ + .dir0 = 0x6, /* bits 1 and 2 input, all others output */ + .dir1 = 0x0, /* all output */ + .value0 = PD1_SPI0D3_EN | PD0_SPI0D2_EN, + .value1 = 0, + }, +}; + +static int setup_soft_switch(int addr, struct switch_config *config) +{ + int ret = 0; + + ret = i2c_write(addr, OLATA, 1, &config->value0, 1); + if (ret) + return ret; + ret = i2c_write(addr, OLATB, 1, &config->value1, 1); + if (ret) + return ret; + + ret = i2c_write(addr, IODIRA, 1, &config->dir0, 1); + if (ret) + return ret; + return i2c_write(addr, IODIRB, 1, &config->dir1, 1); +} + +int config_switch_bit(int num, int port, int bit, int dir, uchar value) +{ + int addr = SWITCH_ADDR + num; + int ret, data_reg, dir_reg; + uchar tmp; + + if (port == IO_PORT_A) { + data_reg = OLATA; + dir_reg = IODIRA; + } else { + data_reg = OLATB; + dir_reg = IODIRB; + } + + if (dir == IO_PORT_INPUT) { + ret = i2c_read(addr, dir_reg, 1, &tmp, 1); + if (ret) + return ret; + tmp |= bit; + return i2c_write(addr, dir_reg, 1, &tmp, 1); + } else { + ret = i2c_read(addr, data_reg, 1, &tmp, 1); + if (ret) + return ret; + if (value) + tmp |= bit; + else + tmp &= ~bit; + ret = i2c_write(addr, data_reg, 1, &tmp, 1); + if (ret) + return ret; + ret = i2c_read(addr, dir_reg, 1, &tmp, 1); + if (ret) + return ret; + tmp &= ~bit; + return i2c_write(addr, dir_reg, 1, &tmp, 1); + } +} + +int setup_board_switches(void) +{ + int ret; + int i; + + for (i = 0; i < NUM_SWITCH; i++) { + ret = setup_soft_switch(SWITCH_ADDR + i, + &switch_config_array[i]); + if (ret) + return ret; + } + return 0; +} diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h new file mode 100644 index 0000000..8da0e44 --- /dev/null +++ b/board/bf609-ezkit/soft_switch.h @@ -0,0 +1,71 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __SOFT_SWITCH_H__ +#define __SOFT_SWITCH_H__ + +/* switch 0 port A */ +#define CAN_EN 0x1 +#define CAN_STB 0x2 +#define CAN0_ERR_EN 0x4 +#define CAN0RX_EN 0x8 +#define CNT0UD_EN 0x10 +#define CNT0DG_EN 0x20 +#define CNT0ZM_EN 0x40 +#define RMII_CLK_EN 0x80 + +/* switch 0 port B */ +#define UART0RTS_EN 0x1 +#define UART0RX_EN 0x2 +#define UART0CTS_EN 0x4 +#define UART0CTS_RTS_LPBK 0x8 +#define UART0CTS_RST_EN 0x10 +#define UART0CTS_146_EN 0x20 +#define TEMP_IRQ_EN 0x40 +#define TEMP_THERM_EN 0x80 + +/* switch 1 port A */ +#define OVERRIDE_SMC0_LP0_BOOT 0x1 +#define SMC0_EPPI2_LP1_SWITCH 0x2 +#define SMC0_LP0_EN 0x8 +#define LED1_GPIO_EN 0x10 +#define LED2_GPIO_EN 0x20 +#define LED3_GPIO_EN 0x40 +#define LED4_GPIO_EN 0x80 + +/* switch 1 port B */ +#define PUSHBUTTON1_EN 0x1 +#define PUSHBUTTON2_EN 0x2 +#define SD_CD_EN 0x4 +#define SD_WP_EN 0x8 +#define SPIFLASH_CS_EN 0x10 +#define SPI0D2_EN 0x20 +#define SPI0D3_EN 0x40 + +/* switch 2 port A */ +#define PHYINT_EN 0x1 +#define PHY_PWR_DWN_INT 0x2 +#define PHYAD0 0x4 +#define ETHERNET_EN 0x8 +#define WAKE_PUSHBUTTON_EN 0x10 +#define PD0_SPI0D2_EN 0x20 +#define PD1_SPI0D3_EN 0x40 +#define PD2_SPI0MISO_EN 0x80 + +/* switch 2 port B */ +#define PD3_SPI0MOSI_EN 0x1 +#define PD4_SPI0CK_EN 0x2 + +#define IO_PORT_A 0 +#define IO_PORT_B 1 +#define IO_PORT_INPUT 0 +#define IO_PORT_OUTPUT 1 + +int config_switch_bit(int num, int port, int bit, int dir, uchar value); +int setup_board_switches(void); +#endif
From: Scott Jiang scott.jiang.linux@gmail.com
Spi driver for bf60x is different from old one, so implement a new driver for it.
Signed-off-by: Scott Jiang scott.jiang.linux@gmail.com Signed-off-by: Sonic Zhang sonic.zhang@analog.com Signed-off-by: Bob Liu lliubbo@gmail.com --- .../blackfin/include/asm/mach-common/bits/spi6xx.h | 240 +++++++++++++++ drivers/spi/Makefile | 1 + drivers/spi/bfin_spi6xx.c | 308 ++++++++++++++++++++ 3 files changed, 549 insertions(+) create mode 100644 arch/blackfin/include/asm/mach-common/bits/spi6xx.h create mode 100644 drivers/spi/bfin_spi6xx.c
diff --git a/arch/blackfin/include/asm/mach-common/bits/spi6xx.h b/arch/blackfin/include/asm/mach-common/bits/spi6xx.h new file mode 100644 index 0000000..8b8dd25 --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/spi6xx.h @@ -0,0 +1,240 @@ +/* + * Analog Devices bfin_spi3 controller driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPI_CHANNEL_H_ +#define _SPI_CHANNEL_H_ + +#include <linux/types.h> + +/* SPI_CONTROL */ +#define SPI_CTL_EN 0x00000001 /* Enable */ +#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ +#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ +#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ +#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ +#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ +#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ +#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ +#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ +#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ +#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ +#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ +#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ +#define SPI_CTL_LSBF 0x00001000 /* LSB First */ +#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ +#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ +#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ +#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ +#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ +#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ +#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ +#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ +#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ +#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ +#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ +#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ +#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ +/* SPI_RX_CONTROL */ +#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ +#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ +#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ +#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ +#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ +#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ +#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ +#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ +#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ +#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ +#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ +#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ +#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ +#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ +#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ +#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ +#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ +#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ +#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ +#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ +/* SPI_TX_CONTROL */ +#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ +#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ +#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ +#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ +#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ +#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ +#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ +#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ +#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ +#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ +#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ +#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ +#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ +#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ +#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ +#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ +#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ +#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ +#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ +#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ +/* SPI_CLOCK */ +#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ +/* SPI_DELAY */ +#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ +#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ +#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ +/* SPI_SSEL */ +#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ +#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ +#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ +#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ +#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ +#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ +#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ +#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ +#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ +#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ +#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ +#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ +#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ +#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ +/* SPI_RWC */ +#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ +/* SPI_RWCR */ +#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ +/* SPI_TWC */ +#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ +/* SPI_TWCR */ +#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ +/* SPI_IMASK */ +#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKCL */ +#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKST */ +#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_STATUS */ +#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ +#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ +#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ +#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ +#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ +#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ +#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ +#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ +#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ +#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ +#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ +#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ +#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ +#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ +#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ +#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ +#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ +#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ +#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ +#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ +#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ +#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ +#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ +/* SPI_ILAT */ +#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ +/* SPI_ILATCL */ +#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ + +/* + * bfin spi3 registers layout + */ +struct bfin_spi_regs { + u32 revid; + u32 control; + u32 rx_control; + u32 tx_control; + u32 clock; + u32 delay; + u32 ssel; + u32 rwc; + u32 rwcr; + u32 twc; + u32 twcr; + u32 reserved0; + u32 emask; + u32 emaskcl; + u32 emaskst; + u32 reserved1; + u32 status; + u32 elat; + u32 elatcl; + u32 reserved2; + u32 rfifo; + u32 reserved3; + u32 tfifo; +}; + +#endif /* _SPI_CHANNEL_H_ */ diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index c20f1f2..bec7de7 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -31,6 +31,7 @@ COBJS-$(CONFIG_ARMADA100_SPI) += armada100_spi.o COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o +COBJS-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o COBJS-$(CONFIG_CF_SPI) += cf_spi.o COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o diff --git a/drivers/spi/bfin_spi6xx.c b/drivers/spi/bfin_spi6xx.c new file mode 100644 index 0000000..be1ae70 --- /dev/null +++ b/drivers/spi/bfin_spi6xx.c @@ -0,0 +1,308 @@ +/* + * Analog Devices SPI3 controller driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> + +#include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> +#include <asm/mach-common/bits/spi6xx.h> + +struct bfin_spi_slave { + struct spi_slave slave; + u32 control, clock; + struct bfin_spi_regs *regs; + int cs_pol; +}; + +#define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave) + +#define gpio_cs(cs) ((cs) - MAX_CTRL_CS) +#ifdef CONFIG_BFIN_SPI_GPIO_CS +# define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS) +#else +# define is_gpio_cs(cs) 0 +#endif + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + if (is_gpio_cs(cs)) + return gpio_is_valid(gpio_cs(cs)); + else + return (cs >= 1 && cs <= MAX_CTRL_CS); +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_set_value(cs, bss->cs_pol); + } else { + u32 ssel; + ssel = bfin_read32(&bss->regs->ssel); + ssel |= 1 << slave->cs; + if (bss->cs_pol) + ssel |= (1 << 8) << slave->cs; + else + ssel &= ~((1 << 8) << slave->cs); + bfin_write32(&bss->regs->ssel, ssel); + } + + SSYNC(); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_set_value(cs, !bss->cs_pol); + } else { + u32 ssel; + ssel = bfin_read32(&bss->regs->ssel); + if (bss->cs_pol) + ssel &= ~((1 << 8) << slave->cs); + else + ssel |= (1 << 8) << slave->cs; + /* deassert cs */ + bfin_write32(&bss->regs->ssel, ssel); + SSYNC(); + /* disable cs */ + ssel &= ~(1 << slave->cs); + bfin_write32(&bss->regs->ssel, ssel); + } + + SSYNC(); +} + +void spi_init() +{ +} + +#define SPI_PINS(n) \ + [n] = { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 } +static unsigned short pins[][5] = { +#ifdef SPI0_REGBASE + SPI_PINS(0), +#endif +#ifdef SPI1_REGBASE + SPI_PINS(1), +#endif +#ifdef SPI2_REGBASE + SPI_PINS(2), +#endif +}; + +#define SPI_CS_PINS(n) \ + [n] = { \ + P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \ + P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \ + P_SPI##n##_SSEL7, \ + } +static const unsigned short cs_pins[][7] = { +#ifdef SPI0_REGBASE + SPI_CS_PINS(0), +#endif +#ifdef SPI1_REGBASE + SPI_CS_PINS(1), +#endif +#ifdef SPI2_REGBASE + SPI_CS_PINS(2), +#endif +}; + +void spi_set_speed(struct spi_slave *slave, uint hz) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + ulong sclk; + u32 clock; + + sclk = get_sclk1(); + clock = sclk / hz; + if (clock) + clock--; + bss->clock = clock; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct bfin_spi_slave *bss; + u32 reg_base; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) { + debug("%s: invalid bus %u\n", __func__, bus); + return NULL; + } + switch (bus) { +#ifdef SPI0_REGBASE + case 0: + reg_base = SPI0_REGBASE; + break; +#endif +#ifdef SPI1_REGBASE + case 1: + reg_base = SPI1_REGBASE; + break; +#endif +#ifdef SPI2_REGBASE + case 2: + reg_base = SPI2_REGBASE; + break; +#endif + default: + return NULL; + } + + bss = malloc(sizeof(*bss)); + if (!bss) + return NULL; + + bss->slave.bus = bus; + bss->slave.cs = cs; + bss->regs = (struct bfin_spi_regs *)reg_base; + bss->control = SPI_CTL_EN | SPI_CTL_MSTR; + if (mode & SPI_CPHA) + bss->control |= SPI_CTL_CPHA; + if (mode & SPI_CPOL) + bss->control |= SPI_CTL_CPOL; + if (mode & SPI_LSB_FIRST) + bss->control |= SPI_CTL_LSBF; + bss->control &= ~SPI_CTL_ASSEL; + bss->cs_pol = mode & SPI_CS_HIGH ? 1 : 0; + spi_set_speed(&bss->slave, max_hz); + + return &bss->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + free(bss); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_request(cs, "bfin-spi"); + gpio_direction_output(cs, !bss->cs_pol); + pins[slave->bus][0] = P_DONTCARE; + } else + pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1]; + peripheral_request_list(pins[slave->bus], "bfin-spi"); + + bfin_write32(&bss->regs->control, bss->control); + bfin_write32(&bss->regs->clock, bss->clock); + bfin_write32(&bss->regs->delay, 0x0); + bfin_write32(&bss->regs->rx_control, SPI_RXCTL_REN); + bfin_write32(&bss->regs->tx_control, SPI_TXCTL_TEN | SPI_TXCTL_TTI); + SSYNC(); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + + peripheral_free_list(pins[slave->bus]); + if (is_gpio_cs(slave->cs)) + gpio_free(gpio_cs(slave->cs)); + + bfin_write32(&bss->regs->rx_control, 0x0); + bfin_write32(&bss->regs->tx_control, 0x0); + bfin_write32(&bss->regs->control, 0x0); + SSYNC(); +} + +#ifndef CONFIG_BFIN_SPI_IDLE_VAL +# define CONFIG_BFIN_SPI_IDLE_VAL 0xff +#endif + +static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx, + uint bytes) +{ + /* discard invalid rx data and empty rfifo */ + while (!(bfin_read32(&bss->regs->status) & SPI_STAT_RFE)) + bfin_read32(&bss->regs->rfifo); + + while (bytes--) { + u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL); + debug("%s: tx:%x ", __func__, value); + bfin_write32(&bss->regs->tfifo, value); + SSYNC(); + while (bfin_read32(&bss->regs->status) & SPI_STAT_RFE) + if (ctrlc()) + return -1; + value = bfin_read32(&bss->regs->rfifo); + if (rx) + *rx++ = value; + debug("rx:%x\n", value); + } + + return 0; +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + const u8 *tx = dout; + u8 *rx = din; + uint bytes = bitlen / 8; + int ret = 0; + + debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, + slave->bus, slave->cs, bitlen, bytes, flags); + + if (bitlen == 0) + goto done; + + /* we can only do 8 bit transfers */ + if (bitlen % 8) { + flags |= SPI_XFER_END; + goto done; + } + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + ret = spi_pio_xfer(bss, tx, rx, bytes); + + done: + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return ret; +}
Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/cpu/gpio.c | 36 +++++-- arch/blackfin/include/asm/gpio.h | 2 +- arch/blackfin/include/asm/mach-bf609/gpio.h | 151 +++++++++++++++++++++++++++ 3 files changed, 181 insertions(+), 8 deletions(-) create mode 100644 arch/blackfin/include/asm/mach-bf609/gpio.h
diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index 5674d42..f684be5 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -66,6 +66,14 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *)PORTH_FER, (struct gpio_port_t *)PORTI_FER, (struct gpio_port_t *)PORTJ_FER, +#elif defined(CONFIG_BF60x) + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, #else # error no gpio arrays defined #endif @@ -216,6 +224,12 @@ static void port_setup(unsigned gpio, unsigned short usage) else gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); SSYNC(); +#elif defined(CONFIG_BF60x) + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio); + SSYNC(); #endif }
@@ -290,7 +304,7 @@ static void portmux_setup(unsigned short per) } } } -#elif defined(CONFIG_BF54x) +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) inline void portmux_setup(unsigned short per) { u32 pmux; @@ -330,7 +344,7 @@ inline void portmux_setup(unsigned short per) # define portmux_setup(...) do { } while (0) #endif
-#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -534,7 +548,7 @@ int peripheral_request(unsigned short per, const char *label) * be requested and used by several drivers */
-#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { #else if (!(per & P_MAYSHARE)) { @@ -651,7 +665,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) gpio, get_label(gpio)); return -EBUSY; } -#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) else { /* Reset POLAR setting when acquiring a gpio for the first time */ set_gpio_polar(gpio, 0); } @@ -732,12 +746,16 @@ void bfin_special_gpio_free(unsigned gpio)
static inline void __bfin_gpio_direction_input(unsigned gpio) { -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); #else gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); #endif +#if defined(CONFIG_BF60x) + gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio); +#else gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); +#endif }
int bfin_gpio_direction_input(unsigned gpio) @@ -785,9 +803,13 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
local_irq_save(flags);
+#if defined(CONFIG_BF60x) + gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio); +#else gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); +#endif gpio_set_value(gpio, value); -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); #else gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); @@ -801,7 +823,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
int bfin_gpio_get_value(unsigned gpio) { -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); #else unsigned long flags; diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 224688f..05131b5 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -68,7 +68,7 @@
#ifndef __ASSEMBLY__
-#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); diff --git a/arch/blackfin/include/asm/mach-bf609/gpio.h b/arch/blackfin/include/asm/mach-bf609/gpio.h new file mode 100644 index 0000000..e297bcc --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/gpio.h @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 112 + +#define GPIO_PA0 0 +#define GPIO_PA1 1 +#define GPIO_PA2 2 +#define GPIO_PA3 3 +#define GPIO_PA4 4 +#define GPIO_PA5 5 +#define GPIO_PA6 6 +#define GPIO_PA7 7 +#define GPIO_PA8 8 +#define GPIO_PA9 9 +#define GPIO_PA10 10 +#define GPIO_PA11 11 +#define GPIO_PA12 12 +#define GPIO_PA13 13 +#define GPIO_PA14 14 +#define GPIO_PA15 15 +#define GPIO_PB0 16 +#define GPIO_PB1 17 +#define GPIO_PB2 18 +#define GPIO_PB3 19 +#define GPIO_PB4 20 +#define GPIO_PB5 21 +#define GPIO_PB6 22 +#define GPIO_PB7 23 +#define GPIO_PB8 24 +#define GPIO_PB9 25 +#define GPIO_PB10 26 +#define GPIO_PB11 27 +#define GPIO_PB12 28 +#define GPIO_PB13 29 +#define GPIO_PB14 30 +#define GPIO_PB15 31 +#define GPIO_PC0 32 +#define GPIO_PC1 33 +#define GPIO_PC2 34 +#define GPIO_PC3 35 +#define GPIO_PC4 36 +#define GPIO_PC5 37 +#define GPIO_PC6 38 +#define GPIO_PC7 39 +#define GPIO_PC8 40 +#define GPIO_PC9 41 +#define GPIO_PC10 42 +#define GPIO_PC11 43 +#define GPIO_PC12 44 +#define GPIO_PC13 45 +#define GPIO_PC14 46 +#define GPIO_PC15 47 +#define GPIO_PD0 48 +#define GPIO_PD1 49 +#define GPIO_PD2 50 +#define GPIO_PD3 51 +#define GPIO_PD4 52 +#define GPIO_PD5 53 +#define GPIO_PD6 54 +#define GPIO_PD7 55 +#define GPIO_PD8 56 +#define GPIO_PD9 57 +#define GPIO_PD10 58 +#define GPIO_PD11 59 +#define GPIO_PD12 60 +#define GPIO_PD13 61 +#define GPIO_PD14 62 +#define GPIO_PD15 63 +#define GPIO_PE0 64 +#define GPIO_PE1 65 +#define GPIO_PE2 66 +#define GPIO_PE3 67 +#define GPIO_PE4 68 +#define GPIO_PE5 69 +#define GPIO_PE6 70 +#define GPIO_PE7 71 +#define GPIO_PE8 72 +#define GPIO_PE9 73 +#define GPIO_PE10 74 +#define GPIO_PE11 75 +#define GPIO_PE12 76 +#define GPIO_PE13 77 +#define GPIO_PE14 78 +#define GPIO_PE15 79 +#define GPIO_PF0 80 +#define GPIO_PF1 81 +#define GPIO_PF2 82 +#define GPIO_PF3 83 +#define GPIO_PF4 84 +#define GPIO_PF5 85 +#define GPIO_PF6 86 +#define GPIO_PF7 87 +#define GPIO_PF8 88 +#define GPIO_PF9 89 +#define GPIO_PF10 90 +#define GPIO_PF11 91 +#define GPIO_PF12 92 +#define GPIO_PF13 93 +#define GPIO_PF14 94 +#define GPIO_PF15 95 +#define GPIO_PG0 96 +#define GPIO_PG1 97 +#define GPIO_PG2 98 +#define GPIO_PG3 99 +#define GPIO_PG4 100 +#define GPIO_PG5 101 +#define GPIO_PG6 102 +#define GPIO_PG7 103 +#define GPIO_PG8 104 +#define GPIO_PG9 105 +#define GPIO_PG10 106 +#define GPIO_PG11 107 +#define GPIO_PG12 108 +#define GPIO_PG13 109 +#define GPIO_PG14 110 +#define GPIO_PG15 111 + +#ifndef __ASSEMBLY__ + +struct gpio_port_t { + unsigned long port_fer; + unsigned long port_fer_set; + unsigned long port_fer_clear; + unsigned long data; + unsigned long data_set; + unsigned long data_clear; + unsigned long dir; + unsigned long dir_set; + unsigned long dir_clear; + unsigned long inen; + unsigned long inen_set; + unsigned long inen_clear; + unsigned long port_mux; + unsigned long toggle; + unsigned long polar; + unsigned long polar_set; + unsigned long polar_clear; + unsigned long lock; + unsigned long spare; + unsigned long revid; +}; + +#endif + +#endif /* _MACH_GPIO_H_ */
Core changed for supporting bf60x.
Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/cpu/cpu.c | 4 +- arch/blackfin/cpu/initcode.c | 308 ++++++++++++++++++++++++++++++-- arch/blackfin/cpu/initcode.h | 52 ++++++ arch/blackfin/cpu/reset.c | 6 + arch/blackfin/include/asm/config-pre.h | 4 + arch/blackfin/lib/board.c | 6 + arch/blackfin/lib/clocks.c | 113 +++++++++--- common/cmd_reginfo.c | 19 +- 8 files changed, 473 insertions(+), 39 deletions(-)
diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c index 6a0bcca..b9fdb07 100644 --- a/arch/blackfin/cpu/cpu.c +++ b/arch/blackfin/cpu/cpu.c @@ -68,7 +68,9 @@ void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) /* Reset upon a double exception rather than just hanging. * Do not do bfin_read on SWRST as that will reset status bits. */ +# ifdef SWRST bfin_write_SWRST(DOUBLE_FAULT); +# endif #endif
serial_early_puts("Board init flash\n"); @@ -92,7 +94,7 @@ int irq_init(void) #elif defined(SICA_IMASK0) bfin_write_SICA_IMASK0(0); bfin_write_SICA_IMASK1(0); -#else +#elif defined(SIC_IMASK) bfin_write_SIC_IMASK(0); #endif /* Set up a dummy NMI handler if needed. */ diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index fb3a101..3bbdf22 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -16,19 +16,138 @@ #include <asm/mach-common/bits/bootrom.h> #include <asm/mach-common/bits/core.h> #include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h>
#define BUG() while (1) { asm volatile("emuexcpt;"); }
#include "serial.h"
+#ifndef __ADSPBF60x__ +#include <asm/mach-common/bits/pll.h> +#else +#include <asm/mach-common/bits/cgu.h> +#endif + +#ifdef __ADSPBF60x__ +#define CONFIG_BFIN_GET_DCLK_M ((CONFIG_CLKIN_HZ*CONFIG_VCO_MULT)/(CONFIG_DCLK_DIV*1000000)) + +#ifndef CONFIG_DMC_DDRCFG +#if ((CONFIG_BFIN_GET_DCLK_M != 125) && \ + (CONFIG_BFIN_GET_DCLK_M != 133) && \ + (CONFIG_BFIN_GET_DCLK_M != 150) && \ + (CONFIG_BFIN_GET_DCLK_M != 166) && \ + (CONFIG_BFIN_GET_DCLK_M != 200) && \ + (CONFIG_BFIN_GET_DCLK_M != 225) && \ + (CONFIG_BFIN_GET_DCLK_M != 250)) +#error "DDR2 CLK must be in (125, 133, 150, 166, 200, 225, 250)MHz" +#endif +#endif + +/* DMC status bits */ +#define IDLE 0x1 +#define MEMINITDONE 0x4 +#define SRACK 0x8 +#define PDACK 0x10 +#define DPDACK 0x20 +#define DLLCALDONE 0x2000 +#define PENDREF 0xF0000 +#define PHYRDPHASE 0xF00000 +#define PHYRDPHASE_OFFSET 20 + +/* DMC DLL control bits */ +#define DLLCALRDCNT 0xFF +#define DATACYC_OFFSET 8 + +struct ddr_config { + u32 ddr_clk; + u32 dmc_ddrctl; + u32 dmc_ddrcfg; + u32 dmc_ddrtr0; + u32 dmc_ddrtr1; + u32 dmc_ddrtr2; + u32 dmc_ddrmr; + u32 dmc_ddrmr1; +}; + +static struct ddr_config ddr_config_table[] = { + [0] = { + .ddr_clk = 125, /* 125MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20705212, + .dmc_ddrtr1 = 0x201003CF, + .dmc_ddrtr2 = 0x00320107, + .dmc_ddrmr = 0x00000422, + .dmc_ddrmr1 = 0x4, + }, + [1] = { + .ddr_clk = 133, /* 133MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20806313, + .dmc_ddrtr1 = 0x2013040D, + .dmc_ddrtr2 = 0x00320108, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [2] = { + .ddr_clk = 150, /* 150MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x20160492, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [3] = { + .ddr_clk = 166, /* 166MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x2016050E, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [4] = { + .ddr_clk = 200, /* 200MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20a07323, + .dmc_ddrtr1 = 0x2016050f, + .dmc_ddrtr2 = 0x00320509, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [5] = { + .ddr_clk = 225, /* 225MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x302006DB, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, + [6] = { + .ddr_clk = 250, /* 250MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x3020079E, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, +}; +#endif + __attribute__((always_inline)) static inline void serial_init(void) { - uint32_t uart_base = UART_DLL; + uint32_t uart_base = UART_BASE;
-#ifdef __ADSPBF54x__ +#if defined(__ADSPBF54x__) || defined(__ADSPBF60x__) # ifdef BFIN_BOOT_UART_USE_RTS # define BFIN_UART_USE_RTS 1 # else @@ -38,7 +157,11 @@ static inline void serial_init(void) size_t i;
/* force RTS rather than relying on auto RTS */ +#if BFIN_UART_HW_VER < 4 bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL); +#else + bfin_write32(&pUART->control, bfin_read32(&pUART->control) | FCPOL); +#endif
/* Wait for the line to clear up. We cannot rely on UART * registers as none of them reflect the status of the RSR. @@ -68,13 +191,13 @@ static inline void serial_init(void) #endif
if (BFIN_DEBUG_EARLY_SERIAL) { - int ucen = bfin_read16(&pUART->gctl) & UCEN; + int enabled = serial_early_enabled(uart_base); serial_early_init(uart_base);
/* If the UART is off, that means we need to program * the baud rate ourselves initially. */ - if (ucen != UCEN) + if (!enabled) serial_early_set_baud(uart_base, CONFIG_BAUDRATE); } } @@ -82,12 +205,16 @@ static inline void serial_init(void) __attribute__((always_inline)) static inline void serial_deinit(void) { -#ifdef __ADSPBF54x__ - uint32_t uart_base = UART_DLL; +#if defined(__ADSPBF54x__) || defined(__ADSPBF60x__) + uint32_t uart_base = UART_BASE;
if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { /* clear forced RTS rather than relying on auto RTS */ +#if BFIN_UART_HW_VER < 4 bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL); +#else + bfin_write32(&pUART->control, bfin_read32(&pUART->control) & ~FCPOL); +#endif } #endif } @@ -95,7 +222,7 @@ static inline void serial_deinit(void) __attribute__((always_inline)) static inline void serial_putc(char c) { - uint32_t uart_base = UART_DLL; + uint32_t uart_base = UART_BASE;
if (!BFIN_DEBUG_EARLY_SERIAL) return; @@ -103,9 +230,9 @@ static inline void serial_putc(char c) if (c == '\n') serial_putc('\r');
- bfin_write16(&pUART->thr, c); + bfin_write(&pUART->thr, c);
- while (!(bfin_read16(&pUART->lsr) & TEMT)) + while (!(_lsr_read(pUART) & TEMT)) continue; }
@@ -152,6 +279,24 @@ program_nmi_handler(void) # define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD #endif
+#ifdef __ADSPBF60x__ + +#ifndef CONFIG_CGU_CTL_VAL +# define CONFIG_CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CONFIG_CLKIN_HALF) +#endif + +#ifndef CONFIG_CGU_DIV_VAL +# define CONFIG_CGU_DIV_VAL \ + ((CONFIG_CCLK_DIV << CSEL_P) | \ + (CONFIG_SCLK0_DIV << S0SEL_P) | \ + (CONFIG_SCLK_DIV << SYSSEL_P) | \ + (CONFIG_SCLK1_DIV << S1SEL_P) | \ + (CONFIG_DCLK_DIV << DSEL_P) | \ + (CONFIG_OCLK_DIV << OSEL_P)) +#endif + +#else /* __ADSPBF60x__ */ + /* PLL_DIV defines */ #ifndef CONFIG_PLL_DIV_VAL # if (CONFIG_CCLK_DIV == 1) @@ -275,6 +420,8 @@ program_nmi_handler(void) # endif #endif
+#endif /* __ADSPBF60x__ */ + __attribute__((always_inline)) static inline void program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) { @@ -283,8 +430,14 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) /* Save the clock pieces that are used in baud rate calculation */ if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { serial_putc('b'); +#ifdef __ADSPBF60x__ + *sdivB = bfin_read_CGU_DIV(); + *sdivB = ((*sdivB >> 8) & 0x1f) * ((*sdivB >> 5) & 0x7); + *vcoB = (bfin_read_CGU_CTL() >> 8) & 0x7f; +#else *sdivB = bfin_read_PLL_DIV() & 0xf; *vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f; +#endif *divB = serial_early_get_div(); serial_putc('c'); } @@ -316,6 +469,7 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) * boot. Once we switch over to u-boot's SPI flash driver, we'll * increase the speed appropriately. */ +#ifdef SPI_BAUD if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) { serial_putc('h'); if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4) @@ -323,6 +477,7 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); serial_putc('i'); } +#endif
serial_putc('j'); } @@ -335,6 +490,10 @@ maybe_self_refresh(ADI_BOOT_DATA *bs) if (!CONFIG_MEM_SIZE) return false;
+#ifdef __ADSPBF60x__ + +#else /* __ADSPBF60x__ */ + /* If external memory is enabled, put it into self refresh first. */ #if defined(EBIU_RSTCTL) if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) { @@ -350,6 +509,7 @@ maybe_self_refresh(ADI_BOOT_DATA *bs) } #endif
+#endif /* __ADSPBF60x__ */ serial_putc('c');
return false; @@ -362,6 +522,37 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs)
serial_putc('a');
+#ifdef __ADSPBF60x__ + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ); + SSYNC(); + while (!(bfin_read_DMC0_STAT() & SRACK)) + continue; + } + + /* Don't set the same value of MSEL and DF to CGU_CTL */ + if ((bfin_read_CGU_CTL() & (MSEL_MASK | DF_MASK)) + != CONFIG_CGU_CTL_VAL) { + bfin_write_CGU_DIV(CONFIG_CGU_DIV_VAL); + bfin_write_CGU_CTL(CONFIG_CGU_CTL_VAL); + while ((bfin_read_CGU_STAT() & (CLKSALGN | PLLBP)) || + !(bfin_read_CGU_STAT() & PLLLK)) + continue; + } + + bfin_write_CGU_DIV(CONFIG_CGU_DIV_VAL | UPDT); + while (bfin_read_CGU_STAT() & CLKSALGN) + continue; + + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ); + SSYNC(); + while (bfin_read_DMC0_STAT() & SRACK) + continue; + } + +#else /* __ADSPBF60x__ */ + vr_ctl = bfin_read_VR_CTL();
serial_putc('b'); @@ -433,7 +624,7 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) #elif defined(SICA_IWR0) bfin_write_SICA_IWR0(1); bfin_write_SICA_IWR1(0); -#else +#elif defined(SIC_IWR) bfin_write_SIC_IWR(1); #endif
@@ -482,13 +673,15 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) #elif defined(SICA_IWR0) bfin_write_SICA_IWR0(-1); bfin_write_SICA_IWR1(-1); -#else +#elif defined(SIC_IWR) bfin_write_SIC_IWR(-1); #endif
serial_putc('n'); }
+#endif /* __ADSPBF60x__ */ + serial_putc('o');
return vr_ctl; @@ -507,14 +700,20 @@ update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { serial_putc('b'); unsigned int sdivR, vcoR; +#ifdef __ADSPBF60x__ + sdivR = bfin_read_CGU_DIV(); + sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7); + vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f; +#else sdivR = bfin_read_PLL_DIV() & 0xf; vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; +#endif int dividend = sdivB * divB * vcoR; int divisor = vcoB * sdivR; unsigned int quotient; for (quotient = 0; dividend > 0; ++quotient) dividend -= divisor; - serial_early_put_div(UART_DLL, quotient - ANOMALY_05000230); + serial_early_put_div(quotient - ANOMALY_05000230); serial_putc('c'); }
@@ -531,6 +730,83 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs)
serial_putc('b');
+#ifdef __ADSPBF60x__ + int dlldatacycle; + int dll_ctl; + int i = 0; + + if (CONFIG_BFIN_GET_DCLK_M == 125) + i = 0; + else if (CONFIG_BFIN_GET_DCLK_M == 133) + i = 1; + else if (CONFIG_BFIN_GET_DCLK_M == 150) + i = 2; + else if (CONFIG_BFIN_GET_DCLK_M == 166) + i = 3; + else if (CONFIG_BFIN_GET_DCLK_M == 200) + i = 4; + else if (CONFIG_BFIN_GET_DCLK_M == 225) + i = 5; + else if (CONFIG_BFIN_GET_DCLK_M == 250) + i = 6; + +#if 0 + for (i = 0; i < ARRAY_SIZE(ddr_config_table); i++) + if (CONFIG_BFIN_GET_DCLK_M == ddr_config_table[i].ddr_clk) + break; +#endif + +#ifndef CONFIG_DMC_DDRCFG + bfin_write_DMC0_CFG(ddr_config_table[i].dmc_ddrcfg); +#else + bfin_write_DMC0_CFG(CONFIG_DMC_DDRCFG); +#endif +#ifndef CONFIG_DMC_DDRTR0 + bfin_write_DMC0_TR0(ddr_config_table[i].dmc_ddrtr0); +#else + bfin_write_DMC0_TR0(CONFIG_DMC_DDRTR0); +#endif +#ifndef CONFIG_DMC_DDRTR1 + bfin_write_DMC0_TR1(ddr_config_table[i].dmc_ddrtr1); +#else + bfin_write_DMC0_TR1(CONFIG_DMC_DDRTR1); +#endif +#ifndef CONFIG_DMC_DDRTR2 + bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2); +#else + bfin_write_DMC0_TR2(CONFIG_DMC_DDRTR2); +#endif +#ifndef CONFIG_DMC_DDRMR + bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr); +#else + bfin_write_DMC0_MR(CONFIG_DMC_DDRMR); +#endif +#ifndef CONFIG_DMC_DDREMR1 + bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1); +#else + bfin_write_DMC0_EMR1(CONFIG_DMC_DDREMR1); +#endif +#ifndef CONFIG_DMC_DDRCTL + bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl); +#else + bfin_write_DMC0_CTL(CONFIG_DMC_DDRCTL); +#endif + + SSYNC(); + while (!(bfin_read_DMC0_STAT() & MEMINITDONE)) + continue; + + dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> PHYRDPHASE_OFFSET; + dll_ctl = bfin_read_DMC0_DLLCTL(); + dll_ctl &= 0x0ff; + bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET)); + + SSYNC(); + while (!(bfin_read_DMC0_STAT() & DLLCALDONE)) + continue; + serial_putc('!'); +#else /* __ADSPBF60x__ */ + /* Program the external memory controller before we come out of * self-refresh. This only works with our SDRAM controller. */ @@ -583,6 +859,7 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) # endif #endif
+#endif /* __ADSPBF60x__ */ serial_putc('e'); }
@@ -606,7 +883,7 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) */ if (ANOMALY_05000307 || vr_ctl & 0x8000) { uint32_t *hibernate_magic = 0; - __builtin_bfin_ssync(); /* make sure memory controller is done */ + SSYNC(); if (hibernate_magic[0] == 0xDEADBEEF) { serial_putc('c'); bfin_write_EVT15(hibernate_magic[1]); @@ -689,3 +966,4 @@ void initcode(ADI_BOOT_DATA *bs)
serial_deinit(); } + diff --git a/arch/blackfin/cpu/initcode.h b/arch/blackfin/cpu/initcode.h index e0aad6d..1fec7f3 100644 --- a/arch/blackfin/cpu/initcode.h +++ b/arch/blackfin/cpu/initcode.h @@ -15,6 +15,8 @@ # define serial_putc(c) #endif
+#ifndef __ADSPBF60x__ + #ifndef CONFIG_EBIU_RSTCTL_VAL # define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */ #endif @@ -30,6 +32,8 @@ # error invalid EBIU_DDRQUE value: must not set reserved bits #endif
+#endif /* __ADSPBF60x__ */ + __attribute__((always_inline)) static inline void program_async_controller(ADI_BOOT_DATA *bs) { @@ -45,10 +49,13 @@ program_async_controller(ADI_BOOT_DATA *bs)
serial_putc('a');
+#ifdef __ADSPBF60x__ /* Program the async banks controller. */ +#ifdef EBIU_AMGCTL bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); +#endif
serial_putc('b');
@@ -66,6 +73,51 @@ program_async_controller(ADI_BOOT_DATA *bs) #endif
serial_putc('c'); + +#else /* __ADSPBF60x__ */ + /* Program the static memory controller. */ +# ifdef CONFIG_SMC_GCTL_VAL + bfin_write_SMC_GCTL(CONFIG_SMC_GCTL_VAL); +# endif +# ifdef CONFIG_SMC_B0CTL_VAL + bfin_write_SMC_B0CTL(CONFIG_SMC_B0CTL_VAL); +# endif +# ifdef CONFIG_SMC_B0TIM_VAL + bfin_write_SMC_B0TIM(CONFIG_SMC_B0TIM_VAL); +# endif +# ifdef CONFIG_SMC_B0ETIM_VAL + bfin_write_SMC_B0ETIM(CONFIG_SMC_B0ETIM_VAL); +# endif +# ifdef CONFIG_SMC_B1CTL_VAL + bfin_write_SMC_B1CTL(CONFIG_SMC_B1CTL_VAL); +# endif +# ifdef CONFIG_SMC_B1TIM_VAL + bfin_write_SMC_B1TIM(CONFIG_SMC_B1TIM_VAL); +# endif +# ifdef CONFIG_SMC_B1ETIM_VAL + bfin_write_SMC_B1ETIM(CONFIG_SMC_B1ETIM_VAL); +# endif +# ifdef CONFIG_SMC_B2CTL_VAL + bfin_write_SMC_B2CTL(CONFIG_SMC_B2CTL_VAL); +# endif +# ifdef CONFIG_SMC_B2TIM_VAL + bfin_write_SMC_B2TIM(CONFIG_SMC_B2TIM_VAL); +# endif +# ifdef CONFIG_SMC_B2ETIM_VAL + bfin_write_SMC_B2ETIM(CONFIG_SMC_B2ETIM_VAL); +# endif +# ifdef CONFIG_SMC_B3CTL_VAL + bfin_write_SMC_B3CTL(CONFIG_SMC_B3CTL_VAL); +# endif +# ifdef CONFIG_SMC_B3TIM_VAL + bfin_write_SMC_B3TIM(CONFIG_SMC_B3TIM_VAL); +# endif +# ifdef CONFIG_SMC_B3ETIM_VAL + bfin_write_SMC_B3ETIM(CONFIG_SMC_B3ETIM_VAL); +# endif + +#endif + serial_putc('d'); }
#endif diff --git a/arch/blackfin/cpu/reset.c b/arch/blackfin/cpu/reset.c index ff39035..b6718d3 100644 --- a/arch/blackfin/cpu/reset.c +++ b/arch/blackfin/cpu/reset.c @@ -23,6 +23,7 @@ __attribute__ ((__l1_text__, __noreturn__)) static void bfin_reset(void) { +#ifdef SWRST /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as * much as possible. This code is in L1, so it won't trigger @@ -66,10 +67,15 @@ static void bfin_reset(void) : "a" (15 * 1) : "LC1", "LB1", "LT1" ); +#endif
while (1) +#if defined(__ADSPBF60x__) + bfin_write_RCU0_CTL(0x1); +#else /* Issue core reset */ asm("raise 1"); +#endif }
/* We need to trampoline ourselves up into L1 since our linker diff --git a/arch/blackfin/include/asm/config-pre.h b/arch/blackfin/include/asm/config-pre.h index 4ce67d4..88aa1da 100644 --- a/arch/blackfin/include/asm/config-pre.h +++ b/arch/blackfin/include/asm/config-pre.h @@ -31,6 +31,8 @@ #define BFIN_BOOT_16HOST_DMA 11 /* boot ldr from 16-bit host dma */ #define BFIN_BOOT_8HOST_DMA 12 /* boot ldr from 8-bit host dma */ #define BFIN_BOOT_NAND 13 /* boot ldr from nand flash */ +#define BFIN_BOOT_RSI_MASTER 14 /* boot ldr from rsi */ +#define BFIN_BOOT_LP_SLAVE 15 /* boot ldr from link port */
#ifndef __ASSEMBLY__ static inline const char *get_bfin_boot_mode(int bfin_boot) @@ -49,6 +51,8 @@ static inline const char *get_bfin_boot_mode(int bfin_boot) case BFIN_BOOT_16HOST_DMA: return "16bit dma"; case BFIN_BOOT_8HOST_DMA: return "8bit dma"; case BFIN_BOOT_NAND: return "nand flash"; + case BFIN_BOOT_RSI_MASTER: return "rsi master"; + case BFIN_BOOT_LP_SLAVE: return "link port slave"; default: return "INVALID"; } } diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 32c5fc9..f72068a 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -310,7 +310,13 @@ void board_init_f(ulong bootflag)
printf("Clock: VCO: %s MHz, ", strmhz(buf, get_vco())); printf("Core: %s MHz, ", strmhz(buf, get_cclk())); +#if defined(__ADSPBF60x__) + printf("System0: %s MHz, ", strmhz(buf, get_sclk0())); + printf("System1: %s MHz, ", strmhz(buf, get_sclk1())); + printf("Dclk: %s MHz\n", strmhz(buf, get_dclk())); +#else printf("System: %s MHz\n", strmhz(buf, get_sclk())); +#endif
if (CONFIG_MEM_SIZE) { printf("RAM: "); diff --git a/arch/blackfin/lib/clocks.c b/arch/blackfin/lib/clocks.c index 0be395b..4d9be68 100644 --- a/arch/blackfin/lib/clocks.c +++ b/arch/blackfin/lib/clocks.c @@ -9,69 +9,138 @@ #include <common.h> #include <asm/blackfin.h>
+#ifdef PLL_CTL +# include <asm/mach-common/bits/pll.h> +# define pll_is_bypassed() (bfin_read_PLL_STAT() & DF) +#else +# include <asm/mach-common/bits/cgu.h> +# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP) +# define bfin_read_PLL_CTL() bfin_read_CGU_CTL() +# define bfin_read_PLL_DIV() bfin_read_CGU_DIV() +#endif + /* Get the voltage input multiplier */ -static u_long cached_vco_pll_ctl, cached_vco; u_long get_vco(void) { - u_long msel; + static u_long cached_vco_pll_ctl, cached_vco; + + u_long msel, pll_ctl;
- u_long pll_ctl = bfin_read_PLL_CTL(); + pll_ctl = bfin_read_PLL_CTL(); if (pll_ctl == cached_vco_pll_ctl) return cached_vco; else cached_vco_pll_ctl = pll_ctl;
- msel = (pll_ctl >> 9) & 0x3F; + msel = (pll_ctl & MSEL) >> MSEL_P; if (0 == msel) - msel = 64; + msel = (MSEL >> MSEL_P) + 1;
cached_vco = CONFIG_CLKIN_HZ; - cached_vco >>= (1 & pll_ctl); /* DF bit */ + cached_vco >>= (pll_ctl & DF); cached_vco *= msel; return cached_vco; }
/* Get the Core clock */ -static u_long cached_cclk_pll_div, cached_cclk; u_long get_cclk(void) { - u_long csel, ssel; + static u_long cached_cclk_pll_div, cached_cclk; + u_long div, csel, ssel;
- if (bfin_read_PLL_STAT() & 0x1) + if (pll_is_bypassed()) return CONFIG_CLKIN_HZ;
- ssel = bfin_read_PLL_DIV(); - if (ssel == cached_cclk_pll_div) + div = bfin_read_PLL_DIV(); + if (div == cached_cclk_pll_div) return cached_cclk; else - cached_cclk_pll_div = ssel; + cached_cclk_pll_div = div;
- csel = ((ssel >> 4) & 0x03); - ssel &= 0xf; + csel = (div & CSEL) >> CSEL_P; +#ifndef CGU_DIV + ssel = (div & SSEL) >> SSEL_P; if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */ cached_cclk = get_vco() / ssel; else cached_cclk = get_vco() >> csel; +#else + cached_cclk = get_vco() / csel; +#endif return cached_cclk; }
/* Get the System clock */ -static u_long cached_sclk_pll_div, cached_sclk; +#ifdef CGU_DIV + +static u_long cached_sclk_pll_div, cached_sclk, cached_sclk0, cached_sclk1, cached_dclk; +static u_long _get_sclk(u_long *cache) +{ + u_long div, ssel; + + if (pll_is_bypassed()) + return CONFIG_CLKIN_HZ; + + div = bfin_read_PLL_DIV(); + if (div == cached_sclk_pll_div) + return *cache; + else + cached_sclk_pll_div = div; + + ssel = (div & SYSSEL) >> SYSSEL_P; + cached_sclk = get_vco() / ssel; + + ssel = (div & S0SEL) >> S0SEL_P; + cached_sclk0 = cached_sclk / ssel; + + ssel = (div & S1SEL) >> S1SEL_P; + cached_sclk1 = cached_sclk / ssel; + + ssel = (div & DSEL) >> DSEL_P; + cached_dclk = get_vco() / ssel; + + return *cache; +} + u_long get_sclk(void) { - u_long ssel; + return _get_sclk(&cached_sclk); +} + +u_long get_sclk0(void) +{ + return _get_sclk(&cached_sclk0); +} + +u_long get_sclk1(void) +{ + return _get_sclk(&cached_sclk1); +} + +u_long get_dclk(void) +{ + return _get_sclk(&cached_dclk); +} +#else + +u_long get_sclk(void) +{ + static u_long cached_sclk_pll_div, cached_sclk; + u_long div, ssel;
- if (bfin_read_PLL_STAT() & 0x1) + if (pll_is_bypassed()) return CONFIG_CLKIN_HZ;
- ssel = bfin_read_PLL_DIV(); - if (ssel == cached_sclk_pll_div) + div = bfin_read_PLL_DIV(); + if (div == cached_sclk_pll_div) return cached_sclk; else - cached_sclk_pll_div = ssel; - - ssel &= 0xf; + cached_sclk_pll_div = div;
+ ssel = (div & SSEL) >> SSEL_P; cached_sclk = get_vco() / ssel; + return cached_sclk; } + +#endif diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 908876c..ef49017 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -190,7 +190,7 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#elif defined(CONFIG_BLACKFIN) puts("\nSystem Configuration registers\n"); - +#ifndef __ADSPBF60x__ puts("\nPLL Registers\n"); printf("\tPLL_DIV: 0x%04x PLL_CTL: 0x%04x\n", bfin_read_PLL_DIV(), bfin_read_PLL_CTL()); @@ -226,7 +226,24 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\tEBIU_SDSTAT: 0x%04x EBIU_SDGCTL: 0x%08x\n", bfin_read_EBIU_SDSTAT(), bfin_read_EBIU_SDGCTL()); # endif +#else + puts("\nCGU Registers\n"); + printf("\tCGU_DIV: 0x%08x CGU_CTL: 0x%08x\n", + bfin_read_CGU_DIV(), bfin_read_CGU_CTL()); + printf("\tCGU_STAT: 0x%08x CGU_LOCKCNT: 0x%08x\n", + bfin_read_CGU_STAT(), bfin_read_CGU_CLKOUTSEL());
+ puts("\nSMC DDR Registers\n"); + printf("\tDDR_CFG: 0x%08x DDR_TR0: 0x%08x\n", + bfin_read_DMC0_CFG(), bfin_read_DMC0_TR0()); + printf("\tDDR_TR1: 0x%08x DDR_TR2: 0x%08x\n", + bfin_read_DMC0_TR1(), bfin_read_DMC0_TR2()); + printf("\tDDR_MR: 0x%08x DDR_EMR1: 0x%08x\n", + bfin_read_DMC0_MR(), bfin_read_DMC0_EMR1()); + printf("\tDDR_CTL: 0x%08x DDR_STAT: 0x%08x\n", + bfin_read_DMC0_CTL(), bfin_read_DMC0_STAT()); + printf("\tDDR_DLLCTL:0x%08x\n", bfin_read_DMC0_DLLCTL()); +#endif #endif /* CONFIG_BLACKFIN */
return 0;
Board files for bf609-ezkit support.
Signed-off-by: Bob Liu lliubbo@gmail.com --- MAINTAINERS | 1 + board/bf609-ezkit/Makefile | 55 ++++++++++++ board/bf609-ezkit/bf609-ezkit.c | 67 ++++++++++++++ boards.cfg | 1 + include/configs/bf609-ezkit.h | 174 +++++++++++++++++++++++++++++++++++++ include/configs/bfin_adi_common.h | 8 +- 6 files changed, 302 insertions(+), 4 deletions(-) create mode 100644 board/bf609-ezkit/Makefile create mode 100644 board/bf609-ezkit/bf609-ezkit.c create mode 100644 include/configs/bf609-ezkit.h
diff --git a/MAINTAINERS b/MAINTAINERS index fd0c65c..2c447d4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1154,6 +1154,7 @@ Blackfin Team u-boot-devel@blackfin.uclinux.org BF538F-EZKIT BF538 BF548-EZKIT BF548 BF561-EZKIT BF561 + BF609-EZKIT BF609
M.Hasewinkel (MHA) info@ssv-embedded.de
diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile new file mode 100644 index 0000000..0bb8fe6 --- /dev/null +++ b/board/bf609-ezkit/Makefile @@ -0,0 +1,55 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_BFIN_SOFT_SWITCH) += soft_switch.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c new file mode 100644 index 0000000..0388226 --- /dev/null +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -0,0 +1,67 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include <asm/portmux.h> +#include "soft_switch.h" + +int checkboard(void) +{ + printf("Board: ADI BF609 EZ-Kit board\n"); + printf(" Support: http://blackfin.uclinux.org/%5Cn"); + return 0; +} + +int board_early_init_f(void) +{ + static const unsigned short pins[] = { + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, + }; + peripheral_request_list(pins, "smc0"); + + return 0; +} + +#ifdef CONFIG_DESIGNWARE_ETH +int board_eth_init(bd_t *bis) +{ + int ret = 0; + + if (CONFIG_DW_PORTS & 1) { + static const unsigned short pins[] = P_RMII0; + if (!peripheral_request_list(pins, "emac0")) + ret += designware_initialize(0, EMAC0_MACCFG, 1, 0); + } + if (CONFIG_DW_PORTS & 2) { + static const unsigned short pins[] = P_RMII1; + if (!peripheral_request_list(pins, "emac1")) + ret += designware_initialize(1, EMAC1_MACCFG, 1, 0); + } + + return ret; +} +#endif + +#ifdef CONFIG_BFIN_SDH +int board_mmc_init(bd_t *bis) +{ + return bfin_mmc_init(bis); +} +#endif + +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + printf("other init\n"); + return setup_board_switches(); +} diff --git a/boards.cfg b/boards.cfg index 2d36d83..8d275a3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -313,6 +313,7 @@ bf538f-ezkit blackfin blackfin bf548-ezkit blackfin blackfin bf561-acvilon blackfin blackfin bf561-ezkit blackfin blackfin +bf609-ezkit blackfin blackfin blackstamp blackfin blackfin blackvme blackfin blackfin br4 blackfin blackfin diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h new file mode 100644 index 0000000..939459a --- /dev/null +++ b/include/configs/bf609-ezkit.h @@ -0,0 +1,174 @@ +/* + * U-boot - Configuration file for BF609 EZ-Kit board + */ + +#ifndef __CONFIG_BF609_EZKIT_H__ +#define __CONFIG_BF609_EZKIT_H__ + +#include <asm/config-pre.h> + +/* + * Processor Settings + */ +#define __ADSPBF60x__ 1 +#define __ADSPBF609__ 1 +#undef __ADSPBF592__ +#undef __ADSPBF59x__ +#define CONFIG_BFIN_CPU bf609-0.0 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA + + +/* For ez-board version 1.0, else undef this */ +#define CONFIG_BFIN_BOARD_VERSION_1_0 + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV + * SCLK0 = SCLK / SCLK0_DIV + * SCLK1 = SCLK / SCLK1_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ (25000000) +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF (0) + +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_VCO_MULT (20) + +/* CCLK_DIV controls the core clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_CCLK_DIV (1) +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_SCLK_DIV (4) +/* Values can range from 0-7 (where 0 means 8) */ +#define CONFIG_SCLK0_DIV (1) +#define CONFIG_SCLK1_DIV (1) +/* DCLK_DIV controls the DDR clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_DCLK_DIV (2) +/* OCLK_DIV controls the output clock divider */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_OCLK_DIV (16) + +#define CONFIG_BFIN_GET_VCO (CONFIG_CLKIN_HZ) +#define CONFIG_PLL_CLK (get_vco()*CONFIG_VCO_MULT) + +#define CONFIG_BFIN_GET_CCLK (CONFIG_PLL_CLK/CONFIG_CCLK_DIV) +#define CONFIG_CCLK_HZ (CONFIG_BFIN_GET_CCLK) + +/* + * Memory Settings + */ +#define CONFIG_MEM_SIZE 128 + +#define CONFIG_SMC_GCTL_VAL 0x00000010 +#define CONFIG_SMC_B0CTL_VAL 0x01007011 +#define CONFIG_SMC_B0TIM_VAL 0x08170977 +#define CONFIG_SMC_B0ETIM_VAL 0x00092231 + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) + +/* + * Network Settings + */ +#define ADI_CMDS_NETWORK 1 +#define CONFIG_NETCONSOLE 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_HOSTNAME bf609-ezkit +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_PORTS 1 +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_MII + +/* i2c Settings */ +#define CONFIG_BFIN_TWI_I2C 1 +#define CONFIG_HARD_I2C 1 + +/* + * Flash Settings + */ +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_JFFS2 +#define CONFIG_SYS_FLASH_CFI_WIDTH 2 +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0xb0000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 131 +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI6XX +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ALL + +/* + * Env Storage Settings + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + +#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0" + +/* + * SDH Settings + */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_BFIN_SDH + +/* + * Misc Settings + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_UART_CONSOLE 0 + +#define CONFIG_DEBUG_DUMP 1 +#define CONFIG_KALLSYMS 1 + +#define CONFIG_CMD_MEMORY + +#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) +#define CONFIG_BFIN_SOFT_SWITCH + +#if 0 +#define CONFIG_UART_MEM 1024 +#undef CONFIG_UART_CONSOLE +#undef CONFIG_JTAG_CONSOLE +#undef CONFIG_UART_CONSOLE_IS_JTAG +#endif + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> +#endif diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 3fbf5c6..a32d741 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -193,10 +193,10 @@ "nand erase 0 0x40000;" \ "nand write $(loadaddr) 0 0x40000" # else -# define UBOOT_ENV_UPDATE \ - "protect off 0x20000000 +$(filesize);" \ - "erase 0x20000000 +$(filesize);" \ - "cp.b $(loadaddr) 0x20000000 $(filesize)" +# define UBOOT_ENV_UPDATE \ + "protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \ + "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \ + "cp.b $(loadaddr)" MK_STR(CONFIG_SYS_FLASH_BASE) " $(filesize)" # endif # ifdef CONFIG_NETCONSOLE # define NETCONSOLE_ENV \
Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/cpu/initcode.c | 13 +++++++++++++ arch/blackfin/cpu/start.S | 2 ++ include/configs/bf609-ezkit.h | 1 + 3 files changed, 16 insertions(+)
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 3bbdf22..6740e34 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -456,8 +456,21 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { serial_putc('e'); +#ifdef __ADSPBF60x__ + bfin_write_SEC_GCTL(0x2); + SSYNC(); + bfin_write_SEC_FCTL(0xc1); + bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6); + + bfin_write_SEC_CCTL(0x2); + SSYNC(); + bfin_write_SEC_GCTL(0x1); + bfin_write_SEC_CCTL(0x1); +#endif bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); +#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART bfin_write_WDOG_CTL(0); +#endif serial_putc('f'); } #endif diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 90b4d1a..7155fc8 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -65,6 +65,7 @@ ENTRY(_start) p5.h = HI(COREMMR_BASE);
#ifdef CONFIG_HW_WATCHDOG +#ifndef __ADSPBF60x__ # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START # define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 # endif @@ -78,6 +79,7 @@ ENTRY(_start) /* fire up the watchdog - R0.L above needs to be 0x0000 */ W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; #endif +#endif
/* Turn on the serial for debugging the init process */ serial_early_init diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 939459a..d6f5190 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -73,6 +73,7 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (256 * 1024)
+#define CONFIG_HW_WATCHDOG /* * Network Settings */
From: Steven Miao realmz6@gmail.com
Add Bf60x resume from hibernate support
Signed-off-by: Steven Miao realmz6@gmail.com Signed-off-by: Sonic Zhang sonic.zhang@analog.com Signed-off-by: Bob Liu lliubbo@gmail.com --- arch/blackfin/cpu/initcode.c | 44 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+)
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 6740e34..3fd6d84 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -504,6 +504,11 @@ maybe_self_refresh(ADI_BOOT_DATA *bs) return false;
#ifdef __ADSPBF60x__ + /* resume from hibernate, return false let ddr initialize */ + if ((bfin_read32(DPM0_STAT) & 0xF0) == 0x50) { + serial_putc('b'); + return false; + }
#else /* __ADSPBF60x__ */
@@ -818,6 +823,7 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) while (!(bfin_read_DMC0_STAT() & DLLCALDONE)) continue; serial_putc('!'); + #else /* __ADSPBF60x__ */
/* Program the external memory controller before we come out of @@ -885,7 +891,44 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) return;
serial_putc('b'); +#ifdef __ADSPBF60x__ + if (bfin_read32(DPM0_RESTORE0) != 0) { + uint32_t reg = bfin_read_DMC0_CTL(); + reg &= ~0x8; + bfin_write_DMC0_CTL(reg); + + while ((bfin_read_DMC0_STAT() & 0x8)) + continue; + while (!(bfin_read_DMC0_STAT() & 0x1)) + continue;
+ serial_putc('z'); + uint32_t *hibernate_magic = bfin_read32(DPM0_RESTORE4); + SSYNC(); /* make sure memory controller is done */ + if (hibernate_magic[0] == 0xDEADBEEF) { + serial_putc('c'); + SSYNC(); + bfin_write_EVT15(hibernate_magic[1]); + bfin_write_IMASK(EVT_IVG15); + __asm__ __volatile__ ( + /* load reti early to avoid anomaly 281 */ + "reti = %2;" + /* clear hibernate magic */ + "[%0] = %1;" + /* load stack pointer */ + "SP = [%0 + 8];" + /* lower ourselves from reset ivg to ivg15 */ + "raise 15;" + "nop;nop;nop;" + "rti;" + : + : "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */), "d"(0xffa00000) + ); + } + + + } +#else /* Are we coming out of hibernate (suspend to memory) ? * The memory layout is: * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF) @@ -917,6 +960,7 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) } serial_putc('d'); } +#endif
serial_putc('e'); }
participants (1)
-
Bob Liu