AVS driver needs to be notified before or after clock change, depending upon new rate is greater or less than current clock rate.

Fixes: 1e0aa873bc7cd ("clk: clk-ti-sci: Notify AVS driver upon setting clock rate")

Cc: Keerthy j-keerthy@ti.com Signed-off-by: Udit Kumar u-kumar1@ti.com --- Boot logs https://gist.github.com/uditkumarti/5a05f9b18b8e5bc347ef98c901cc13d4

Separate patch for clk-sci driver to handle AVS, as per review feedback in https://lore.kernel.org/all/20230920120256.2901860-1-u-kumar1@ti.com/

drivers/clk/ti/clk-sci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/ti/clk-sci.c b/drivers/clk/ti/clk-sci.c index 74df5a397b..8fc3254c99 100644 --- a/drivers/clk/ti/clk-sci.c +++ b/drivers/clk/ti/clk-sci.c @@ -91,12 +91,12 @@ static ulong ti_sci_clk_set_rate(struct clk *clk, ulong rate) const struct ti_sci_handle *sci = data->sci; const struct ti_sci_clk_ops *cops = &sci->ops.clk_ops; int ret; + int freq_scale_up = rate >= ti_sci_clk_get_rate(clk) ? 1 : 0;

debug("%s(clk=%p, rate=%lu)\n", __func__, clk, rate);

-#ifdef CONFIG_K3_AVS0 - k3_avs_notify_freq(clk->id, clk->data, rate); -#endif + if (IS_ENABLED(CONFIG_K3_AVS0) && freq_scale_up) + k3_avs_notify_freq(clk->id, clk->data, rate);

ret = cops->set_freq(sci, clk->id, clk->data, 0, rate, ULONG_MAX); if (ret) { @@ -104,6 +104,9 @@ static ulong ti_sci_clk_set_rate(struct clk *clk, ulong rate) return ret; }

+ if (IS_ENABLED(CONFIG_K3_AVS0) && !freq_scale_up) + k3_avs_notify_freq(clk->id, clk->data, rate); + return rate; }