[U-Boot] [PATCH] TI: Rework SRAM definitions and maximums
On all TI platforms the ROM defines a "downloaded image" area at or near the start of SRAM which is followed by a reserved area. As it is at best bad form and at worst possibly harmful in corner cases to write in this reserved area, we stop doing that by adding in the define NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this. At current we define the end of scratch space at 0x228 bytes past the start of scratch space this this gives us a lot of room to grow. As these scratch uses are non-optional today, all targets are modified to respect this boundary.
Tested on OMAP4 Pandaboard, OMAP3 Beagle xM
Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Nagendra T S nagendra@mistralsolutions.com Cc: Vaibhav Hiremath hvaibhav@ti.com Cc: Lokesh Vutla lokeshvutla@ti.com Cc: Felipe Balbi balbi@ti.com Cc: Igor Grinberg grinberg@compulab.co.il Cc: Nikita Kiryanov nikita@compulab.co.il Cc: Paul Kocialkowski contact@paulk.fr Cc: Enric Balletbo i Serra eballetbo@gmail.com Cc: Adam Ford aford173@gmail.com Cc: Steve Sakoman sakoman@gmail.com Cc: Stefan Roese sr@denx.de Cc: Thomas Weber weber@corscience.de Cc: Hannes Schmelzer oe5hpm@oevsv.at Cc: Thomas Chou thomas@wytron.com.tw Cc: Masahiro Yamada yamada.masahiro@socionext.com Cc: Simon Glass sjg@chromium.org Cc: Joe Hershberger joe.hershberger@ni.com Cc: Sam Protsenko semen.protsenko@linaro.org Cc: Heiko Schocher hs@denx.de Cc: Samuel Egli samuel.egli@siemens.com Cc: Michal Simek michal.simek@xilinx.com Cc: Wolfgang Denk wd@denx.de Cc: Mateusz Kulikowski mateusz.kulikowski@gmail.com Cc: Ben Whitten ben.whitten@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Bin Meng bmeng.cn@gmail.com Cc: Sekhar Nori nsekhar@ti.com Cc: Mugunthan V N mugunthanvnm@ti.com Cc: "B, Ravi" ravibabu@ti.com Cc: "Matwey V. Kornilov" matwey.kornilov@gmail.com Cc: Ladislav Michl ladis@linux-mips.org Cc: Ash Charles ashcharles@gmail.com Cc: "Kipisz, Steven" s-kipisz2@ti.com Cc: Daniel Allred d-allred@ti.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/include/asm/arch-am33xx/omap.h | 13 ++++++------- arch/arm/include/asm/arch-omap3/omap.h | 5 ++++- arch/arm/include/asm/arch-omap4/omap.h | 5 ++++- arch/arm/include/asm/arch-omap5/omap.h | 6 +++++- include/configs/am3517_crane.h | 3 ++- include/configs/am3517_evm.h | 3 ++- include/configs/am43xx_evm.h | 3 --- include/configs/am57xx_evm.h | 2 -- include/configs/bur_am335x_common.h | 6 ++++-- include/configs/cm_t35.h | 3 ++- include/configs/cm_t43.h | 1 - include/configs/dra7xx_evm.h | 2 -- include/configs/kc1.h | 3 ++- include/configs/omap3_evm.h | 3 ++- include/configs/omap3_igep00x0.h | 8 ++++---- include/configs/omap3_logic.h | 10 ++++++---- include/configs/omap3_overo.h | 8 +++++--- include/configs/siemens-am33x-common.h | 3 ++- include/configs/sniper.h | 3 ++- include/configs/tam3517-common.h | 3 ++- include/configs/tao3530.h | 3 ++- include/configs/ti814x_evm.h | 3 ++- include/configs/ti816x_evm.h | 3 ++- include/configs/ti_am335x_common.h | 1 - include/configs/ti_armv7_common.h | 21 +++++++++++++-------- include/configs/ti_omap3_common.h | 1 - include/configs/ti_omap4_common.h | 1 - include/configs/ti_omap5_common.h | 7 ------- include/configs/tricorder.h | 3 ++- 29 files changed, 75 insertions(+), 61 deletions(-)
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 47962dadf59c..3293caaca4ab 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -15,24 +15,23 @@ #ifndef _OMAP_H_ #define _OMAP_H_
+#include <linux/sizes.h> + #ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4030B800 +#define NON_SECURE_SRAM_IMG_END 0x4030B800 #elif defined(CONFIG_TI81XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4031B800 +#define NON_SECURE_SRAM_IMG_END 0x4031B800 #elif defined(CONFIG_AM43XX) #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40340000 -#define SRAM_SCRATCH_SPACE_ADDR 0x40337C00 -#define AM4372_BOARD_NAME_START SRAM_SCRATCH_SPACE_ADDR -#define AM4372_BOARD_NAME_END SRAM_SCRATCH_SPACE_ADDR + 0xC -#define AM4372_BOARD_VERSION_START SRAM_SCRATCH_SPACE_ADDR + 0xD -#define AM4372_BOARD_VERSION_END SRAM_SCRATCH_SPACE_ADDR + 0x14 +#define NON_SECURE_SRAM_IMG_END 0x40337DE0 #define QSPI_BASE 0x47900000 #endif +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
/* Boot parameters */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h index bc0e02a200cb..417ff895f19e 100644 --- a/arch/arm/include/asm/arch-omap3/omap.h +++ b/arch/arm/include/asm/arch-omap3/omap.h @@ -10,6 +10,8 @@ #ifndef _OMAP3_H_ #define _OMAP3_H_
+#include <linux/sizes.h> + /* Stuff on L3 Interconnect */ #define SMX_APE_BASE 0x68000000
@@ -145,7 +147,8 @@ struct gpio {
#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ #define NON_SECURE_SRAM_END 0x40210000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4020E000 +#define NON_SECURE_SRAM_IMG_END 0x4020F000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 5ccda6ee94ce..b86a7768401c 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -19,6 +19,8 @@ #include <asm/types.h> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+#include <linux/sizes.h> + /* * L4 Peripherals - L4 Wakeup and L4 Core now */ @@ -109,7 +111,8 @@ struct s32ktimer { */ #define NON_SECURE_SRAM_START 0x40304000 #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ -#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000 +#define NON_SECURE_SRAM_IMG_END 0x4030C000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 2fd5cda6238f..ef8e9752450e 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -16,6 +16,8 @@ #include <asm/types.h> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+#include <linux/sizes.h> + /* * L4 Peripherals - L4 Wakeup and L4 Core now */ @@ -186,11 +188,13 @@ struct s32ktimer { #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ +#define NON_SECURE_SRAM_IMG_END 0x4037E000 #else #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ +#define NON_SECURE_SRAM_IMG_END 0x4031E000 #endif -#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
/* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index a65d1a884b01..7855e88c6922 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -279,7 +279,8 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 4d88aac63750..b0779c387cab 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -337,7 +337,8 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 0467953566c6..4ce133e46ee5 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -38,9 +38,6 @@
/* SPL defines. */ #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR -#define CONFIG_SPL_MAX_SIZE (NON_SECURE_SRAM_END - \ - CONFIG_PUB_ROM_DATA_SIZE - \ - CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 46e8d4cfd715..cf74dbe740ab 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -102,8 +102,6 @@ #ifdef CONFIG_SPL_BUILD #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_MAX_SIZE (256 << 10) /* 256 KiB */ #endif
/* SPI SPL */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index a94b1e271155..a6a4f0c94384 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -47,10 +47,12 @@ * area between 0x402F0400 and 0x4030B800 as a download area and * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also * supports X-MODEM loading via UART, and we leverage this and then use - * Y-MODEM to load u-boot.img, when booted over UART. + * Y-MODEM to load u-boot.img, when booted over UART. We must also include + * the scratch space that U-Boot uses in SRAM. */ #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
/* * Since SPL did pll and ddr initialization for us, diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 03dc3cc0d919..5d717a4a5284 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -344,7 +344,8 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
/* * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 5d94f133cba9..a0f981625a7d 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -154,7 +154,6 @@
/* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index b66949f4155b..ed1ee5453fbb 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -185,8 +185,6 @@ /* In SPL, use the environment and discard MMC support for space. */ #ifdef CONFIG_SPL_BUILD #undef CONFIG_SPL_MMC_SUPPORT -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ #endif #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/kc1.h b/include/configs/kc1.h index b08cf2161db7..b30aca6047cd 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -120,7 +120,8 @@ #define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (48 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 52a24d37b882..83af42686c8c 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -345,7 +345,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index e0d25937f735..3389bf316472 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -16,11 +16,11 @@ #include <configs/ti_omap3_common.h> #include <asm/mach-types.h>
-/* SRAM starts at 0x40200000 and ends at 0x4020FFFF (64KB) */ -#undef CONFIG_SPL_MAX_SIZE +/* + * We are only ever GP parts and will utilize all of the "downloaded image" + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). + */ #undef CONFIG_SPL_TEXT_BASE - -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_TEXT_BASE 0x40200000
/* diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 49a8b3f5ef43..2ed89efa0ba5 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -30,11 +30,13 @@
#include <configs/ti_omap3_common.h>
-/* Override default SPL info to minimize empty space and allow BCH8 in SPL */ +/* + * We are only ever GP parts and will utilize all of the "downloaded image" + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in + * order to allow for BCH8 to fit in. + */ #undef CONFIG_SPL_TEXT_BASE -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_TEXT_BASE 0x40200000
/* Display CPU and Board information */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index fbd0c2a07085..be7159bee35b 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -11,10 +11,12 @@ #define CONFIG_NAND
#include <configs/ti_omap3_common.h> -#undef CONFIG_SPL_MAX_SIZE +/* + * We are only ever GP parts and will utilize all of the "downloaded image" + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). + */ #undef CONFIG_SPL_TEXT_BASE -#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_BCH
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index eab665c2866b..5ca94b06d869 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -126,7 +126,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index fb348a5cd26e..cd303c3c201d 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -128,7 +128,8 @@ #define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 73ff416aed2a..06aca6a3b3da 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -220,7 +220,8 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 6616d7396e74..15243c99dd72 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -328,7 +328,8 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
/* * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 3c058832e176..bc9282faba55 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -159,7 +159,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 05fd00fd5d27..6f4926647487 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -125,7 +125,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40400000 -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index bcd56fc08dc1..38be5b6e2c40 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -59,7 +59,6 @@ * Y-MODEM to load u-boot.img, when booted over UART. */ #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20))
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 9f947eeb87ed..d60d213d5448 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -212,14 +212,14 @@ /* * Place the image at the start of the ROM defined image space (per * CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined - * downloaded image area. We initalize DRAM as soon as we can so that - * we can place stack, malloc and BSS there. We load U-Boot itself into - * memory at 0x80800000 for legacy reasons (to not conflict with older - * SPLs). We have our BSS be placed 2MiB after this, to allow for the - * default Linux kernel address of 0x80008000 to work with most sized - * kernels, in the Falcon Mode case. We have the SPL malloc pool at the - * end of the BSS area. We suggest that the stack be placed at 32MiB after - * the start of DRAM to allow room for all of the above (handled in Kconfig). + * downloaded image area minus 1KiB for scratch space. We initalize DRAM as + * soon as we can so that we can place stack, malloc and BSS there. We load + * U-Boot itself into memory at 0x80800000 for legacy reasons (to not conflict + * with older SPLs). We have our BSS be placed 2MiB after this, to allow for + * the default Linux kernel address of 0x80008000 to work with most sized + * kernels, in the Falcon Mode case. We have the SPL malloc pool at the end + * of the BSS area. We suggest that the stack be placed at 32MiB after the + * start of DRAM to allow room for all of the above (handled in Kconfig). */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x80800000 @@ -233,6 +233,11 @@ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #endif +#ifndef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE) +#endif +
/* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 32877d1964de..843f87d93081 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -70,7 +70,6 @@
/* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 5fad3c1242c5..34de087469fd 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -152,7 +152,6 @@ * So moving TEXT_BASE down to non-HS limit. */ #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 3589cdc3a88e..e68e23c2fddf 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -156,13 +156,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40300000 #endif
-/* DRA7xx/AM57xx have 512K of SRAM, OMAP5 only 128K */ -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) -#define TI_ROM_BOOT_LOAD_END 0x4037E000 -#else -#define TI_ROM_BOOT_LOAD_END 0x4031E000 -#endif -#define CONFIG_SPL_MAX_SIZE (TI_ROM_BOOT_LOAD_END - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 127a9689482f..d14f8f13c688 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -340,7 +340,8 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
On Fri, Aug 26, 2016 at 12:30 PM, Tom Rini trini@konsulko.com wrote:
On all TI platforms the ROM defines a "downloaded image" area at or near the start of SRAM which is followed by a reserved area. As it is at best bad form and at worst possibly harmful in corner cases to write in this reserved area, we stop doing that by adding in the define NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this. At current we define the end of scratch space at 0x228 bytes past the start of scratch space this this gives us a lot of room to grow. As these scratch uses are non-optional today, all targets are modified to respect this boundary.
Tested on OMAP4 Pandaboard, OMAP3 Beagle xM
Tested on LogicPD DM3730 Torpedo Tested by Adam Ford aford173@gmail.com
Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Nagendra T S nagendra@mistralsolutions.com Cc: Vaibhav Hiremath hvaibhav@ti.com Cc: Lokesh Vutla lokeshvutla@ti.com Cc: Felipe Balbi balbi@ti.com Cc: Igor Grinberg grinberg@compulab.co.il Cc: Nikita Kiryanov nikita@compulab.co.il Cc: Paul Kocialkowski contact@paulk.fr Cc: Enric Balletbo i Serra eballetbo@gmail.com Cc: Adam Ford aford173@gmail.com Cc: Steve Sakoman sakoman@gmail.com Cc: Stefan Roese sr@denx.de Cc: Thomas Weber weber@corscience.de Cc: Hannes Schmelzer oe5hpm@oevsv.at Cc: Thomas Chou thomas@wytron.com.tw Cc: Masahiro Yamada yamada.masahiro@socionext.com Cc: Simon Glass sjg@chromium.org Cc: Joe Hershberger joe.hershberger@ni.com Cc: Sam Protsenko semen.protsenko@linaro.org Cc: Heiko Schocher hs@denx.de Cc: Samuel Egli samuel.egli@siemens.com Cc: Michal Simek michal.simek@xilinx.com Cc: Wolfgang Denk wd@denx.de Cc: Mateusz Kulikowski mateusz.kulikowski@gmail.com Cc: Ben Whitten ben.whitten@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Bin Meng bmeng.cn@gmail.com Cc: Sekhar Nori nsekhar@ti.com Cc: Mugunthan V N mugunthanvnm@ti.com Cc: "B, Ravi" ravibabu@ti.com Cc: "Matwey V. Kornilov" matwey.kornilov@gmail.com Cc: Ladislav Michl ladis@linux-mips.org Cc: Ash Charles ashcharles@gmail.com Cc: "Kipisz, Steven" s-kipisz2@ti.com Cc: Daniel Allred d-allred@ti.com Signed-off-by: Tom Rini trini@konsulko.com
arch/arm/include/asm/arch-am33xx/omap.h | 13 ++++++------- arch/arm/include/asm/arch-omap3/omap.h | 5 ++++- arch/arm/include/asm/arch-omap4/omap.h | 5 ++++- arch/arm/include/asm/arch-omap5/omap.h | 6 +++++- include/configs/am3517_crane.h | 3 ++- include/configs/am3517_evm.h | 3 ++- include/configs/am43xx_evm.h | 3 --- include/configs/am57xx_evm.h | 2 -- include/configs/bur_am335x_common.h | 6 ++++-- include/configs/cm_t35.h | 3 ++- include/configs/cm_t43.h | 1 - include/configs/dra7xx_evm.h | 2 -- include/configs/kc1.h | 3 ++- include/configs/omap3_evm.h | 3 ++- include/configs/omap3_igep00x0.h | 8 ++++---- include/configs/omap3_logic.h | 10 ++++++---- include/configs/omap3_overo.h | 8 +++++--- include/configs/siemens-am33x-common.h | 3 ++- include/configs/sniper.h | 3 ++- include/configs/tam3517-common.h | 3 ++- include/configs/tao3530.h | 3 ++- include/configs/ti814x_evm.h | 3 ++- include/configs/ti816x_evm.h | 3 ++- include/configs/ti_am335x_common.h | 1 - include/configs/ti_armv7_common.h | 21 +++++++++++++-------- include/configs/ti_omap3_common.h | 1 - include/configs/ti_omap4_common.h | 1 - include/configs/ti_omap5_common.h | 7 ------- include/configs/tricorder.h | 3 ++- 29 files changed, 75 insertions(+), 61 deletions(-)
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 47962dadf59c..3293caaca4ab 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -15,24 +15,23 @@ #ifndef _OMAP_H_ #define _OMAP_H_
+#include <linux/sizes.h>
#ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4030B800 +#define NON_SECURE_SRAM_IMG_END 0x4030B800 #elif defined(CONFIG_TI81XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4031B800 +#define NON_SECURE_SRAM_IMG_END 0x4031B800 #elif defined(CONFIG_AM43XX) #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40340000 -#define SRAM_SCRATCH_SPACE_ADDR 0x40337C00 -#define AM4372_BOARD_NAME_START SRAM_SCRATCH_SPACE_ADDR -#define AM4372_BOARD_NAME_END SRAM_SCRATCH_SPACE_ADDR + 0xC -#define AM4372_BOARD_VERSION_START SRAM_SCRATCH_SPACE_ADDR + 0xD -#define AM4372_BOARD_VERSION_END SRAM_SCRATCH_SPACE_ADDR + 0x14 +#define NON_SECURE_SRAM_IMG_END 0x40337DE0 #define QSPI_BASE 0x47900000 #endif +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
/* Boot parameters */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h index bc0e02a200cb..417ff895f19e 100644 --- a/arch/arm/include/asm/arch-omap3/omap.h +++ b/arch/arm/include/asm/arch-omap3/omap.h @@ -10,6 +10,8 @@ #ifndef _OMAP3_H_ #define _OMAP3_H_
+#include <linux/sizes.h>
/* Stuff on L3 Interconnect */ #define SMX_APE_BASE 0x68000000
@@ -145,7 +147,8 @@ struct gpio {
#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ #define NON_SECURE_SRAM_END 0x40210000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4020E000 +#define NON_SECURE_SRAM_IMG_END 0x4020F000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 5ccda6ee94ce..b86a7768401c 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -19,6 +19,8 @@ #include <asm/types.h> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+#include <linux/sizes.h>
/*
- L4 Peripherals - L4 Wakeup and L4 Core now
*/ @@ -109,7 +111,8 @@ struct s32ktimer { */ #define NON_SECURE_SRAM_START 0x40304000 #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ -#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000 +#define NON_SECURE_SRAM_IMG_END 0x4030C000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 2fd5cda6238f..ef8e9752450e 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -16,6 +16,8 @@ #include <asm/types.h> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+#include <linux/sizes.h>
/*
- L4 Peripherals - L4 Wakeup and L4 Core now
*/ @@ -186,11 +188,13 @@ struct s32ktimer { #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ +#define NON_SECURE_SRAM_IMG_END 0x4037E000 #else #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ +#define NON_SECURE_SRAM_IMG_END 0x4031E000 #endif -#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
/* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index a65d1a884b01..7855e88c6922 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -279,7 +279,8 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 4d88aac63750..b0779c387cab 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -337,7 +337,8 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 0467953566c6..4ce133e46ee5 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -38,9 +38,6 @@
/* SPL defines. */ #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR -#define CONFIG_SPL_MAX_SIZE (NON_SECURE_SRAM_END - \
CONFIG_PUB_ROM_DATA_SIZE - \CONFIG_SPL_TEXT_BASE)#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 46e8d4cfd715..cf74dbe740ab 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -102,8 +102,6 @@ #ifdef CONFIG_SPL_BUILD #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_MAX_SIZE (256 << 10) /* 256 KiB */ #endif
/* SPI SPL */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index a94b1e271155..a6a4f0c94384 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -47,10 +47,12 @@
- area between 0x402F0400 and 0x4030B800 as a download area and
- 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
- supports X-MODEM loading via UART, and we leverage this and then use
- Y-MODEM to load u-boot.img, when booted over UART.
- Y-MODEM to load u-boot.img, when booted over UART. We must also include
*/
- the scratch space that U-Boot uses in SRAM.
#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)/*
- Since SPL did pll and ddr initialization for us,
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 03dc3cc0d919..5d717a4a5284 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -344,7 +344,8 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)/*
- Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 5d94f133cba9..a0f981625a7d 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -154,7 +154,6 @@
/* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index b66949f4155b..ed1ee5453fbb 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -185,8 +185,6 @@ /* In SPL, use the environment and discard MMC support for space. */ #ifdef CONFIG_SPL_BUILD #undef CONFIG_SPL_MMC_SUPPORT -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ #endif #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/kc1.h b/include/configs/kc1.h index b08cf2161db7..b30aca6047cd 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -120,7 +120,8 @@ #define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (48 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 52a24d37b882..83af42686c8c 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -345,7 +345,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index e0d25937f735..3389bf316472 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -16,11 +16,11 @@ #include <configs/ti_omap3_common.h> #include <asm/mach-types.h>
-/* SRAM starts at 0x40200000 and ends at 0x4020FFFF (64KB) */ -#undef CONFIG_SPL_MAX_SIZE +/*
- We are only ever GP parts and will utilize all of the "downloaded image"
- area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_TEXT_BASE 0x40200000
/* diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 49a8b3f5ef43..2ed89efa0ba5 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -30,11 +30,13 @@
#include <configs/ti_omap3_common.h>
-/* Override default SPL info to minimize empty space and allow BCH8 in SPL */ +/*
- We are only ever GP parts and will utilize all of the "downloaded image"
- area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
- order to allow for BCH8 to fit in.
- */
#undef CONFIG_SPL_TEXT_BASE -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_TEXT_BASE 0x40200000
/* Display CPU and Board information */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index fbd0c2a07085..be7159bee35b 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -11,10 +11,12 @@ #define CONFIG_NAND
#include <configs/ti_omap3_common.h> -#undef CONFIG_SPL_MAX_SIZE +/*
- We are only ever GP parts and will utilize all of the "downloaded image"
- area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
#undef CONFIG_SPL_TEXT_BASE -#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_BCH
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index eab665c2866b..5ca94b06d869 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -126,7 +126,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index fb348a5cd26e..cd303c3c201d 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -128,7 +128,8 @@ #define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 73ff416aed2a..06aca6a3b3da 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -220,7 +220,8 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 6616d7396e74..15243c99dd72 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -328,7 +328,8 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)/*
- Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 3c058832e176..bc9282faba55 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -159,7 +159,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 05fd00fd5d27..6f4926647487 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -125,7 +125,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40400000 -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index bcd56fc08dc1..38be5b6e2c40 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -59,7 +59,6 @@
- Y-MODEM to load u-boot.img, when booted over UART.
*/ #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20))
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 9f947eeb87ed..d60d213d5448 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -212,14 +212,14 @@ /*
- Place the image at the start of the ROM defined image space (per
- CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined
- downloaded image area. We initalize DRAM as soon as we can so that
- we can place stack, malloc and BSS there. We load U-Boot itself into
- memory at 0x80800000 for legacy reasons (to not conflict with older
- SPLs). We have our BSS be placed 2MiB after this, to allow for the
- default Linux kernel address of 0x80008000 to work with most sized
- kernels, in the Falcon Mode case. We have the SPL malloc pool at the
- end of the BSS area. We suggest that the stack be placed at 32MiB after
- the start of DRAM to allow room for all of the above (handled in Kconfig).
- downloaded image area minus 1KiB for scratch space. We initalize DRAM as
- soon as we can so that we can place stack, malloc and BSS there. We load
- U-Boot itself into memory at 0x80800000 for legacy reasons (to not conflict
- with older SPLs). We have our BSS be placed 2MiB after this, to allow for
- the default Linux kernel address of 0x80008000 to work with most sized
- kernels, in the Falcon Mode case. We have the SPL malloc pool at the end
- of the BSS area. We suggest that the stack be placed at 32MiB after the
*/
- start of DRAM to allow room for all of the above (handled in Kconfig).
#ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x80800000 @@ -233,6 +233,11 @@ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #endif +#ifndef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)+#endif
/* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 32877d1964de..843f87d93081 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -70,7 +70,6 @@
/* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 5fad3c1242c5..34de087469fd 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -152,7 +152,6 @@
- So moving TEXT_BASE down to non-HS limit.
*/ #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 3589cdc3a88e..e68e23c2fddf 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -156,13 +156,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40300000 #endif
-/* DRA7xx/AM57xx have 512K of SRAM, OMAP5 only 128K */ -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) -#define TI_ROM_BOOT_LOAD_END 0x4037E000 -#else -#define TI_ROM_BOOT_LOAD_END 0x4031E000 -#endif -#define CONFIG_SPL_MAX_SIZE (TI_ROM_BOOT_LOAD_END - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 127a9689482f..d14f8f13c688 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -340,7 +340,8 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
1.9.1
On Friday 26 August 2016 11:00 PM, Tom Rini wrote:
On all TI platforms the ROM defines a "downloaded image" area at or near the start of SRAM which is followed by a reserved area. As it is at best bad form and at worst possibly harmful in corner cases to write in this reserved area, we stop doing that by adding in the define NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this. At current we define the end of scratch space at 0x228 bytes past the start of scratch space this this gives us a lot of room to grow. As these scratch uses are non-optional today, all targets are modified to respect this boundary.
Tested on OMAP4 Pandaboard, OMAP3 Beagle xM
Verified on AM437x-GP EVM.
Tested-by: Lokesh Vutla lokeshvutla@ti.com Acked-by: Lokesh Vutla lokeshvutla@ti.com
Thanks and regards, Lokesh
Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Nagendra T S nagendra@mistralsolutions.com Cc: Vaibhav Hiremath hvaibhav@ti.com Cc: Lokesh Vutla lokeshvutla@ti.com Cc: Felipe Balbi balbi@ti.com Cc: Igor Grinberg grinberg@compulab.co.il Cc: Nikita Kiryanov nikita@compulab.co.il Cc: Paul Kocialkowski contact@paulk.fr Cc: Enric Balletbo i Serra eballetbo@gmail.com Cc: Adam Ford aford173@gmail.com Cc: Steve Sakoman sakoman@gmail.com Cc: Stefan Roese sr@denx.de Cc: Thomas Weber weber@corscience.de Cc: Hannes Schmelzer oe5hpm@oevsv.at Cc: Thomas Chou thomas@wytron.com.tw Cc: Masahiro Yamada yamada.masahiro@socionext.com Cc: Simon Glass sjg@chromium.org Cc: Joe Hershberger joe.hershberger@ni.com Cc: Sam Protsenko semen.protsenko@linaro.org Cc: Heiko Schocher hs@denx.de Cc: Samuel Egli samuel.egli@siemens.com Cc: Michal Simek michal.simek@xilinx.com Cc: Wolfgang Denk wd@denx.de Cc: Mateusz Kulikowski mateusz.kulikowski@gmail.com Cc: Ben Whitten ben.whitten@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Bin Meng bmeng.cn@gmail.com Cc: Sekhar Nori nsekhar@ti.com Cc: Mugunthan V N mugunthanvnm@ti.com Cc: "B, Ravi" ravibabu@ti.com Cc: "Matwey V. Kornilov" matwey.kornilov@gmail.com Cc: Ladislav Michl ladis@linux-mips.org Cc: Ash Charles ashcharles@gmail.com Cc: "Kipisz, Steven" s-kipisz2@ti.com Cc: Daniel Allred d-allred@ti.com Signed-off-by: Tom Rini trini@konsulko.com
arch/arm/include/asm/arch-am33xx/omap.h | 13 ++++++------- arch/arm/include/asm/arch-omap3/omap.h | 5 ++++- arch/arm/include/asm/arch-omap4/omap.h | 5 ++++- arch/arm/include/asm/arch-omap5/omap.h | 6 +++++- include/configs/am3517_crane.h | 3 ++- include/configs/am3517_evm.h | 3 ++- include/configs/am43xx_evm.h | 3 --- include/configs/am57xx_evm.h | 2 -- include/configs/bur_am335x_common.h | 6 ++++-- include/configs/cm_t35.h | 3 ++- include/configs/cm_t43.h | 1 - include/configs/dra7xx_evm.h | 2 -- include/configs/kc1.h | 3 ++- include/configs/omap3_evm.h | 3 ++- include/configs/omap3_igep00x0.h | 8 ++++---- include/configs/omap3_logic.h | 10 ++++++---- include/configs/omap3_overo.h | 8 +++++--- include/configs/siemens-am33x-common.h | 3 ++- include/configs/sniper.h | 3 ++- include/configs/tam3517-common.h | 3 ++- include/configs/tao3530.h | 3 ++- include/configs/ti814x_evm.h | 3 ++- include/configs/ti816x_evm.h | 3 ++- include/configs/ti_am335x_common.h | 1 - include/configs/ti_armv7_common.h | 21 +++++++++++++-------- include/configs/ti_omap3_common.h | 1 - include/configs/ti_omap4_common.h | 1 - include/configs/ti_omap5_common.h | 7 ------- include/configs/tricorder.h | 3 ++- 29 files changed, 75 insertions(+), 61 deletions(-)
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 47962dadf59c..3293caaca4ab 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -15,24 +15,23 @@ #ifndef _OMAP_H_ #define _OMAP_H_
+#include <linux/sizes.h>
#ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4030B800 +#define NON_SECURE_SRAM_IMG_END 0x4030B800 #elif defined(CONFIG_TI81XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4031B800 +#define NON_SECURE_SRAM_IMG_END 0x4031B800 #elif defined(CONFIG_AM43XX) #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40340000 -#define SRAM_SCRATCH_SPACE_ADDR 0x40337C00 -#define AM4372_BOARD_NAME_START SRAM_SCRATCH_SPACE_ADDR -#define AM4372_BOARD_NAME_END SRAM_SCRATCH_SPACE_ADDR + 0xC -#define AM4372_BOARD_VERSION_START SRAM_SCRATCH_SPACE_ADDR + 0xD -#define AM4372_BOARD_VERSION_END SRAM_SCRATCH_SPACE_ADDR + 0x14 +#define NON_SECURE_SRAM_IMG_END 0x40337DE0 #define QSPI_BASE 0x47900000 #endif +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
/* Boot parameters */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h index bc0e02a200cb..417ff895f19e 100644 --- a/arch/arm/include/asm/arch-omap3/omap.h +++ b/arch/arm/include/asm/arch-omap3/omap.h @@ -10,6 +10,8 @@ #ifndef _OMAP3_H_ #define _OMAP3_H_
+#include <linux/sizes.h>
/* Stuff on L3 Interconnect */ #define SMX_APE_BASE 0x68000000
@@ -145,7 +147,8 @@ struct gpio {
#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ #define NON_SECURE_SRAM_END 0x40210000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4020E000 +#define NON_SECURE_SRAM_IMG_END 0x4020F000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 5ccda6ee94ce..b86a7768401c 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -19,6 +19,8 @@ #include <asm/types.h> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+#include <linux/sizes.h>
/*
- L4 Peripherals - L4 Wakeup and L4 Core now
*/ @@ -109,7 +111,8 @@ struct s32ktimer { */ #define NON_SECURE_SRAM_START 0x40304000 #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ -#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000 +#define NON_SECURE_SRAM_IMG_END 0x4030C000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 2fd5cda6238f..ef8e9752450e 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -16,6 +16,8 @@ #include <asm/types.h> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+#include <linux/sizes.h>
/*
- L4 Peripherals - L4 Wakeup and L4 Core now
*/ @@ -186,11 +188,13 @@ struct s32ktimer { #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ +#define NON_SECURE_SRAM_IMG_END 0x4037E000 #else #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ +#define NON_SECURE_SRAM_IMG_END 0x4031E000 #endif -#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
/* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index a65d1a884b01..7855e88c6922 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -279,7 +279,8 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 4d88aac63750..b0779c387cab 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -337,7 +337,8 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 0467953566c6..4ce133e46ee5 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -38,9 +38,6 @@
/* SPL defines. */ #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR -#define CONFIG_SPL_MAX_SIZE (NON_SECURE_SRAM_END - \
CONFIG_PUB_ROM_DATA_SIZE - \CONFIG_SPL_TEXT_BASE)#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 46e8d4cfd715..cf74dbe740ab 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -102,8 +102,6 @@ #ifdef CONFIG_SPL_BUILD #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_MAX_SIZE (256 << 10) /* 256 KiB */ #endif
/* SPI SPL */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index a94b1e271155..a6a4f0c94384 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -47,10 +47,12 @@
- area between 0x402F0400 and 0x4030B800 as a download area and
- 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
- supports X-MODEM loading via UART, and we leverage this and then use
- Y-MODEM to load u-boot.img, when booted over UART.
- Y-MODEM to load u-boot.img, when booted over UART. We must also include
*/
- the scratch space that U-Boot uses in SRAM.
#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)/*
- Since SPL did pll and ddr initialization for us,
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 03dc3cc0d919..5d717a4a5284 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -344,7 +344,8 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)/*
- Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 5d94f133cba9..a0f981625a7d 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -154,7 +154,6 @@
/* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index b66949f4155b..ed1ee5453fbb 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -185,8 +185,6 @@ /* In SPL, use the environment and discard MMC support for space. */ #ifdef CONFIG_SPL_BUILD #undef CONFIG_SPL_MMC_SUPPORT -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ #endif #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/kc1.h b/include/configs/kc1.h index b08cf2161db7..b30aca6047cd 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -120,7 +120,8 @@ #define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (48 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 52a24d37b882..83af42686c8c 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -345,7 +345,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index e0d25937f735..3389bf316472 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -16,11 +16,11 @@ #include <configs/ti_omap3_common.h> #include <asm/mach-types.h>
-/* SRAM starts at 0x40200000 and ends at 0x4020FFFF (64KB) */ -#undef CONFIG_SPL_MAX_SIZE +/*
- We are only ever GP parts and will utilize all of the "downloaded image"
- area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_TEXT_BASE 0x40200000
/* diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 49a8b3f5ef43..2ed89efa0ba5 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -30,11 +30,13 @@
#include <configs/ti_omap3_common.h>
-/* Override default SPL info to minimize empty space and allow BCH8 in SPL */ +/*
- We are only ever GP parts and will utilize all of the "downloaded image"
- area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
- order to allow for BCH8 to fit in.
- */
#undef CONFIG_SPL_TEXT_BASE -#undef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_TEXT_BASE 0x40200000
/* Display CPU and Board information */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index fbd0c2a07085..be7159bee35b 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -11,10 +11,12 @@ #define CONFIG_NAND
#include <configs/ti_omap3_common.h> -#undef CONFIG_SPL_MAX_SIZE +/*
- We are only ever GP parts and will utilize all of the "downloaded image"
- area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
#undef CONFIG_SPL_TEXT_BASE -#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_BCH
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index eab665c2866b..5ca94b06d869 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -126,7 +126,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index fb348a5cd26e..cd303c3c201d 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -128,7 +128,8 @@ #define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 73ff416aed2a..06aca6a3b3da 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -220,7 +220,8 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 6616d7396e74..15243c99dd72 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -328,7 +328,8 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)/*
- Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 3c058832e176..bc9282faba55 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -159,7 +159,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 05fd00fd5d27..6f4926647487 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -125,7 +125,8 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40400000 -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index bcd56fc08dc1..38be5b6e2c40 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -59,7 +59,6 @@
- Y-MODEM to load u-boot.img, when booted over UART.
*/ #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20))
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 9f947eeb87ed..d60d213d5448 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -212,14 +212,14 @@ /*
- Place the image at the start of the ROM defined image space (per
- CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined
- downloaded image area. We initalize DRAM as soon as we can so that
- we can place stack, malloc and BSS there. We load U-Boot itself into
- memory at 0x80800000 for legacy reasons (to not conflict with older
- SPLs). We have our BSS be placed 2MiB after this, to allow for the
- default Linux kernel address of 0x80008000 to work with most sized
- kernels, in the Falcon Mode case. We have the SPL malloc pool at the
- end of the BSS area. We suggest that the stack be placed at 32MiB after
- the start of DRAM to allow room for all of the above (handled in Kconfig).
- downloaded image area minus 1KiB for scratch space. We initalize DRAM as
- soon as we can so that we can place stack, malloc and BSS there. We load
- U-Boot itself into memory at 0x80800000 for legacy reasons (to not conflict
- with older SPLs). We have our BSS be placed 2MiB after this, to allow for
- the default Linux kernel address of 0x80008000 to work with most sized
- kernels, in the Falcon Mode case. We have the SPL malloc pool at the end
- of the BSS area. We suggest that the stack be placed at 32MiB after the
*/
- start of DRAM to allow room for all of the above (handled in Kconfig).
#ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x80800000 @@ -233,6 +233,11 @@ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #endif +#ifndef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)+#endif
/* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 32877d1964de..843f87d93081 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -70,7 +70,6 @@
/* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 5fad3c1242c5..34de087469fd 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -152,7 +152,6 @@
- So moving TEXT_BASE down to non-HS limit.
*/ #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 3589cdc3a88e..e68e23c2fddf 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -156,13 +156,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40300000 #endif
-/* DRA7xx/AM57xx have 512K of SRAM, OMAP5 only 128K */ -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) -#define TI_ROM_BOOT_LOAD_END 0x4037E000 -#else -#define TI_ROM_BOOT_LOAD_END 0x4031E000 -#endif -#define CONFIG_SPL_MAX_SIZE (TI_ROM_BOOT_LOAD_END - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 127a9689482f..d14f8f13c688 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -340,7 +340,8 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
On Sat, Aug 27, 2016 at 05:29:44PM +0530, Lokesh Vutla wrote:
On Friday 26 August 2016 11:00 PM, Tom Rini wrote:
On all TI platforms the ROM defines a "downloaded image" area at or near the start of SRAM which is followed by a reserved area. As it is at best bad form and at worst possibly harmful in corner cases to write in this reserved area, we stop doing that by adding in the define NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this. At current we define the end of scratch space at 0x228 bytes past the start of scratch space this this gives us a lot of room to grow. As these scratch uses are non-optional today, all targets are modified to respect this boundary.
Tested on OMAP4 Pandaboard, OMAP3 Beagle xM
Verified on AM437x-GP EVM.
Tested-by: Lokesh Vutla lokeshvutla@ti.com Acked-by: Lokesh Vutla lokeshvutla@ti.com
Verified on IGEPv2.
Tested-by: Ladislav Michl ladis@linux-mips.org
Also note, that this patch and CONFIG_SPL_SYS_MALLOC_SIMPLE is needed for sucessfull build (with gcc-5.4.0), otherwise compilation fails with: arm-v7a-linux-gnueabi-ld.bfd: u-boot-spl section `.data' will not fit in region `.sram' arm-v7a-linux-gnueabi-ld.bfd: region `.sram' overflowed by 264 bytes Just enabling CONFIG_SPL_SYS_MALLOC_SIMPLE without this patch makes malloc in fat loading code fail and thus causes boot failure.
Best regards, ladis
On Fri, Aug 26, 2016 at 01:30:43PM -0400, Tom Rini wrote:
On all TI platforms the ROM defines a "downloaded image" area at or near the start of SRAM which is followed by a reserved area. As it is at best bad form and at worst possibly harmful in corner cases to write in this reserved area, we stop doing that by adding in the define NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this. At current we define the end of scratch space at 0x228 bytes past the start of scratch space this this gives us a lot of room to grow. As these scratch uses are non-optional today, all targets are modified to respect this boundary.
Tested on OMAP4 Pandaboard, OMAP3 Beagle xM
Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Nagendra T S nagendra@mistralsolutions.com Cc: Vaibhav Hiremath hvaibhav@ti.com Cc: Lokesh Vutla lokeshvutla@ti.com Cc: Felipe Balbi balbi@ti.com Cc: Igor Grinberg grinberg@compulab.co.il Cc: Nikita Kiryanov nikita@compulab.co.il Cc: Paul Kocialkowski contact@paulk.fr Cc: Enric Balletbo i Serra eballetbo@gmail.com Cc: Adam Ford aford173@gmail.com Cc: Steve Sakoman sakoman@gmail.com Cc: Stefan Roese sr@denx.de Cc: Thomas Weber weber@corscience.de Cc: Hannes Schmelzer oe5hpm@oevsv.at Cc: Thomas Chou thomas@wytron.com.tw Cc: Masahiro Yamada yamada.masahiro@socionext.com Cc: Simon Glass sjg@chromium.org Cc: Joe Hershberger joe.hershberger@ni.com Cc: Sam Protsenko semen.protsenko@linaro.org Cc: Heiko Schocher hs@denx.de Cc: Samuel Egli samuel.egli@siemens.com Cc: Michal Simek michal.simek@xilinx.com Cc: Wolfgang Denk wd@denx.de Cc: Mateusz Kulikowski mateusz.kulikowski@gmail.com Cc: Ben Whitten ben.whitten@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Bin Meng bmeng.cn@gmail.com Cc: Sekhar Nori nsekhar@ti.com Cc: Mugunthan V N mugunthanvnm@ti.com Cc: "B, Ravi" ravibabu@ti.com Cc: "Matwey V. Kornilov" matwey.kornilov@gmail.com Cc: Ladislav Michl ladis@linux-mips.org Cc: Ash Charles ashcharles@gmail.com Cc: "Kipisz, Steven" s-kipisz2@ti.com Cc: Daniel Allred d-allred@ti.com Signed-off-by: Tom Rini trini@konsulko.com Tested-by: Lokesh Vutla lokeshvutla@ti.com Acked-by: Lokesh Vutla lokeshvutla@ti.com Tested-by: Ladislav Michl ladis@linux-mips.org
Applied to u-boot/master, thanks!
participants (4)
-
Adam Ford -
Ladislav Michl -
Lokesh Vutla -
Tom Rini