This patch adds the new board SMDK6442 that uses s5p6442 SoC.

Cc: Minkyu Kang mk7.kang@samsung.com Cc: Kyungmin Park kyungmin.park@samsung.com Signed-off-by: Joonyoung Shim jy0922.shim@samsung.com --- MAKEALL | 1 + Makefile | 3 + board/samsung/smdk6442/Makefile | 55 +++++++ board/samsung/smdk6442/config.mk | 6 + board/samsung/smdk6442/lowlevel_init.S | 202 ++++++++++++++++++++++++++ board/samsung/smdk6442/mem_setup.S | 175 +++++++++++++++++++++++ board/samsung/smdk6442/onenand.c | 41 ++++++ board/samsung/smdk6442/smdk6442.c | 54 +++++++ include/configs/smdk6442.h | 242 ++++++++++++++++++++++++++++++++ 9 files changed, 779 insertions(+), 0 deletions(-) create mode 100644 board/samsung/smdk6442/Makefile create mode 100644 board/samsung/smdk6442/config.mk create mode 100644 board/samsung/smdk6442/lowlevel_init.S create mode 100644 board/samsung/smdk6442/mem_setup.S create mode 100644 board/samsung/smdk6442/onenand.c create mode 100644 board/samsung/smdk6442/smdk6442.c create mode 100644 include/configs/smdk6442.h

diff --git a/MAKEALL b/MAKEALL index beacb5f..e3a0b49 100755 --- a/MAKEALL +++ b/MAKEALL @@ -626,6 +626,7 @@ LIST_ARM11=" \ mx31pdk_nand \ qong \ smdk6400 \ + smdk6442 \ "

######################################################################### diff --git a/Makefile b/Makefile index d801e25..eeebb13 100644 --- a/Makefile +++ b/Makefile @@ -3329,6 +3329,9 @@ smdk6400_config : unconfig fi @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk

+smdk6442_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm1176 smdk6442 samsung s5p64xx + #======================================================================== # i386 #======================================================================== diff --git a/board/samsung/smdk6442/Makefile b/board/samsung/smdk6442/Makefile new file mode 100644 index 0000000..9700ffb --- /dev/null +++ b/board/samsung/smdk6442/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := smdk6442.o +COBJS-$(CONFIG_SAMSUNG_ONENAND) += onenand.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/smdk6442/config.mk b/board/samsung/smdk6442/config.mk new file mode 100644 index 0000000..9c39c8a --- /dev/null +++ b/board/samsung/smdk6442/config.mk @@ -0,0 +1,6 @@ +# +# Copyright (C) 2010 Samsung Elecgtronics +# Minkyu Kang mk7.kang@samsung.com +# + +TEXT_BASE = 0x34800000 diff --git a/board/samsung/smdk6442/lowlevel_init.S b/board/samsung/smdk6442/lowlevel_init.S new file mode 100644 index 0000000..3b8e368 --- /dev/null +++ b/board/samsung/smdk6442/lowlevel_init.S @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang mk7.kang@samsung.com + * Joonyoung Shim jy0922.shim@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include <asm/arch/power.h> + +/* + * Register usages: + * + * r5 has zero always + */ + +_TEXT_BASE: + .word TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + mov r9, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r8, =S5P6442_GPIO_BASE @0xE0200000 + + /* IO retension release */ + ldr r0, =S5P6442_OTHERS @0xE010E000 + ldr r1, [r0] + ldr r2, =(1 << 31) @IO_RET_REL + orr r1, r1, r2 + str r1, [r0] + +#ifndef CONFIG_ONENAND_IPL + /* Disable Watchdog */ + ldr r0, =S5P6442_WATCHDOG_BASE @0xEA200000 + orr r0, r0, #0x0 + str r5, [r0] + + /* setting SRAM */ + ldr r0, =S5P6442_SROMC_BASE @0xE7000000 + ldr r1, =0x9 + str r1, [r0] +#endif + + /* S5P6442 has 3 groups of interrupt sources */ + ldr r0, =S5P6442_VIC0_BASE @0xE4000000 + add r1, r0, #0x00100000 + add r2, r0, #0x00200000 + + /* Disable all interrupts (VIC0, VIC1 and VIC2) */ + mvn r3, #0x0 + str r3, [r0, #0x14] @INTENCLEAR + str r3, [r1, #0x14] @INTENCLEAR + str r3, [r2, #0x14] @INTENCLEAR + +#ifndef CONFIG_ONENAND_IPL + /* Set all interrupts as IRQ */ + str r5, [r0, #0xc] @INTSELECT + str r5, [r1, #0xc] @INTSELECT + str r5, [r2, #0xc] @INTSELECT + + /* Pending Interrupt Clear */ + str r5, [r0, #0xf00] @INTADDRESS + str r5, [r1, #0xf00] @INTADDRESS + str r5, [r2, #0xf00] @INTADDRESS +#endif + +#ifndef CONFIG_ONENAND_IPL + /* for UART */ + bl uart_asm_init +#endif + +#ifdef CONFIG_ONENAND_IPL + /* init system clock */ + bl system_clock_init + + bl mem_ctrl_asm_init + + /* OneNAND Sync Read Support at S5PC110 only + * RM[15] : Sync Read + * BRWL[14:12] : 7 CLK + * BL[11:9] : Continuous + * VHF[3] : Very High Frequency Enable (Over 83MHz) + * HF[2] : High Frequency Enable (Over 66MHz) + */ + ldr r1, =0xE00C + + ldr r0, =0xB001E442 + strh r1, [r0] + + ldr r0, =0xB0600000 + str r1, [r0, #0x100] @ ONENAND_IF_CTRL + + /* Wakeup support. Don't know if it's going to be used, untested. */ + ldr r0, =S5P6442_RST_STAT + ldr r1, [r0] + bic r1, r1, #0xfffffff7 + cmp r1, #0x8 + beq wakeup_reset +#endif + +1: + mov lr, r9 + mov pc, lr + +#ifdef CONFIG_ONENAND_IPL +wakeup_reset: + + /* Clear wakeup status register */ + ldr r0, =S5P6442_WAKEUP_STAT + ldr r1, [r0] + str r1, [r0] + + /* Load return address and jump to kernel */ + ldr r0, =S5P6442_INFORM0 + + /* r1 = physical address of s5p6442_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel (sleep.S) */ + mov pc, r1 + nop + nop +#endif + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r8, =S5P64XX_CLOCK_BASE @ 0xE0100000 + + /* Set Lock Time */ + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r8, #0x000] @ APLL_LOCK + str r1, [r8, #0x008] @ MPLL_LOCK + str r1, [r8, #0x010] @ EPLL_LOCK + str r1, [r8, #0x020] @ VPLL_LOCK + + /* APLL_CON */ + ldr r1, =0x829b0c01 @ SDIV 1, PDIV 0xc, MDIV 0x29b + str r1, [r8, #0x100] + /* MPLL_CON */ + ldr r1, =0x810a0303 @ SDIV 3, PDIV 3, MDIV 0x10a + str r1, [r8, #0x108] + /* EPLL_CON */ + ldr r1, =0x80600303 @ SDIV 3, PDIV 3, MDIV 0x60 + str r1, [r8, #0x110] + /* VPLL_CON */ + ldr r1, =0x806c0303 @ SDIV 3, PDIV 3, MDIV 0x6c + str r1, [r8, #0x120] + + /* Set Source Clock */ + ldr r1, =0x1111 @ A, M, E, VPLL Muxing + str r1, [r8, #0x200] @ CLK_SRC0 + + /* Set Clock divider */ + ldr r1, =0x10100000 + str r1, [r8, #0x300] + + /* wait at least 200us to stablize all clock */ + mov r2, #0x10000 +1: subs r2, r2, #1 + bne 1b + + mov pc, lr + +#ifndef CONFIG_ONENAND_IPL +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + mov r0, r8 + ldr r1, =0x22222222 + str r1, [r0, #0x0] @ GPA0_CON + ldr r1, =0x00000022 + str r1, [r0, #0x20] @ GPA1_CON + + mov pc, lr +#endif diff --git a/board/samsung/smdk6442/mem_setup.S b/board/samsung/smdk6442/mem_setup.S new file mode 100644 index 0000000..bb3bfaf --- /dev/null +++ b/board/samsung/smdk6442/mem_setup.S @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2010 Samsung Electrnoics + * Minkyu Kang mk7.kang@samsung.com + * Joonyoung Shim jy0922.shim@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + ldr r6, =S5P6442_DMC_BASE @ 0xE6000000 + + /* DLL parameter setting */ + ldr r1, =0x00141408 + str r1, [r6, #0x018] @ PHYCONTROL0 + ldr r1, =0x00008044 + str r1, [r6, #0x01C] @ PHYCONTROL1 + + /* DLL on */ + ldr r1, =0x0014140a + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL start */ + ldr r1, =0x0014140b + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* + * auto refresh off + * LPDDR: 0xf001090, MCP_C_TYPE: 0xf0010d0 + */ + ldr r1, =0x0f0010d0 + str r1, [r6, #0x000] @ CONCONTROL + + /* + * Burst Length 4, 2 chips, 32-bit + * OFF: dynamic self refresh, force precharge, dynamic power down + * ON: clock stop + * LPDDR: 0x00202100, MCP_C_TYPE: 0x00212101 + */ + ldr r1, =0x00212101 + str r1, [r6, #0x004] @ MEMCONTROL + + /* + * Bank0 + * 0x30 -> 0x30000000 + * 0xf8 -> 0x37FFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + * LPDDR: 0x30f80312, MCP_C_TYPE: 0x30f80222 + */ + ldr r1, =0x30f80222 + str r1, [r6, #0x008] @ MEMCONFIG0 + + /* + * Bank1 + * 0x40 -> 0x40000000 + * 0xf0 -> 0x4FFFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + * LPDDR: 0x40f00222, MCP_C_TYPE: 0x40f00222 + */ + ldr r1, =0x40f00222 + str r1, [r6, #0x00c] @ MEMCONFIG1 + + ldr r1, =0xf0000000 + str r1, [r6, #0x014] @ PRECHCONFIG + + /* + * FIXME: Please verify these values + * 7.8us * 166MHz %LE %LONG1294(0x50E) + * 7.8us * 133MHz %LE %LONG1038(0x40E), + * 7.8us * 100MHz %LE %LONG780(0x30C), + * 7.8us * 20MHz %LE %LONG156(0x9C), + * 7.8us * 10MHz %LE %LONG78(0x4E) + */ + ldr r1, =0x0000040e + str r1, [r6, #0x030] @ TIMINGAREF + + /* 133 MHz */ + ldr r1, =0x0c233286 + str r1, [r6, #0x034] @ TIMINGROW + + /* t_wtr=1 t_wr=2 t_rtp=1 cl=3 wl=0 rl=5 */ + ldr r1, =0x12130005 + str r1, [r6, #0x038] @ TIMINGDATA + + /* + * t_faw=0xe t_xsr=0x12 t_xp=2 t_cke=2 t_mrd=2 + * LPDDR: 0x0e100222, MCP_C_TYPE: 0x0e120222 + */ + ldr r1, =0x0e120222 + str r1, [r6, #0x03C] @ TIMINGPOWER + + /* LPDDR: chip0, MCP_C_TYPE: chip0, chip1 */ + /* chip0 Deselect */ + ldr r1, =0x07000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 PALL */ + ldr r1, =0x01000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 REFA */ + ldr r1, =0x05000000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip0 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00000032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 Deselect */ + ldr r1, =0x07100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 PALL */ + ldr r1, =0x01100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 REFA */ + ldr r1, =0x05100000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip1 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00100032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* + * auto refresh on + * LPDDR: 0x0f0010b0, MCP_C_TYPE: 0x0f0010f0 + */ + ldr r1, =0x0f0010f0 + str r1, [r6, #0x000] @ CONCONTROL + + /* PwrdnConfig */ + ldr r1, =0x00100002 + str r1, [r6, #0x028] @ PWRDNCONFIG + + /* + * Burst Length 4, 2 chips, 32-bit + * OFF: dynamic self refresh, force precharge, dynamic power down + * ON: clock stop + * LPDDR: 0x00202100, MCP_C_TYPE: 0x00212101 + */ + ldr r1, =0x00212101 + str r1, [r6, #0x004] @ MEMCONTROL + + mov pc, lr + + .ltorg diff --git a/board/samsung/smdk6442/onenand.c b/board/samsung/smdk6442/onenand.c new file mode 100644 index 0000000..32b9af9 --- /dev/null +++ b/board/samsung/smdk6442/onenand.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Kyungmin Park kyungmin.park@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <linux/mtd/samsung_onenand.h> + +#include <onenand_uboot.h> + +#include <asm/io.h> +#include <asm/arch/clock.h> + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + this->base = (void *) 0xB0000000; + this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; +} diff --git a/board/samsung/smdk6442/smdk6442.c b/board/samsung/smdk6442/smdk6442.c new file mode 100644 index 0000000..bb8d469 --- /dev/null +++ b/board/samsung/smdk6442/smdk6442.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang mk7.kang@samsung.com + * Joonyoung Shim jy0922.shim@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_SMDK6442; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board:\t6442\n"); + return 0; +} +#endif diff --git a/include/configs/smdk6442.h b/include/configs/smdk6442.h new file mode 100644 index 0000000..472e43d --- /dev/null +++ b/include/configs/smdk6442.h @@ -0,0 +1,242 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang mk7.kang@samsung.com + * Joonyoung Shim jy0922.shim@samsung.com + * + * Configuation settings for the SAMSUNG board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ +#define CONFIG_S5P64XX 1 /* which is in a S5P64XX Family */ +#define CONFIG_S5P6442 1 /* which is in a S5P6442 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* input clock of PLL: SMDK6442 has 12MHz input clock */ +#define CONFIG_SYS_CLK_FREQ_6442 12000000 + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x30000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* + * Size of malloc() pool + * 1MB = 0x100000, 0x100000 = 1024 * 1024 + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ + /* initial data */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* use SERIAL 1 on S5P6442 */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_BAUDRATE 115200 + +/*********************************************************** + * Command definition + ***********************************************************/ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_BOOTD +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_XIMG +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_NET + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ONENAND +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_SYS_64BIT_VSPRINTF 1 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define MTDIDS_DEFAULT "onenand0=samsung-onenand" +#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:256k(bootloader)"\ + ",256k(params)"\ + ",3m(kernel)"\ + ",16m(test)"\ + ",-(UBI)\0" + +#define CONFIG_BOOTCOMMAND "run ubifsboot" + +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ + " console=ttySAC1,115200n8" \ + " ${meminfo}" + +#define CONFIG_COMMON_BOOT "console=ttySAC1,115200n8" \ + " ${meminfo}" \ + " ${mtdparts}" + +#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ubi.mtd=4" \ + " rootfstype=cramfs " CONFIG_COMMON_BOOT + +#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \ + " onenand write 0x32008000 0x0 0x40000\0" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_UPDATEB \ + "updatek=" \ + "onenand erase 0x80000 0x300000;" \ + "onenand write 0x31008000 0x80000 0x300000\0" \ + "updateu=" \ + "onenand erase 0x01560000 0x1eaa0000;" \ + "onenand write 0x32000000 0x1260000 0x8C0000\0" \ + "bootk=" \ + "onenand read 0x30007FC0 0x80000 0x300000;" \ + "bootm 0x30007FC0\0" \ + "flashboot=" \ + "set bootargs root=/dev/mtdblock${bootblock}" \ + "rootfstype=${rootfstype}" \ + "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "ubifsboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs" \ + "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "android=" \ + "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \ + "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "nfsboot=" \ + "set bootargs root=/dev/nfs rw ubi.mtd=${ubiblock} " \ + "nfsroot=${nfsroot},nolock,tcp " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:generic:usb0:off " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "ramboot=" \ + "set bootargs " CONFIG_RAMDISK_BOOT \ + "initrd=0x33000000,8M ramdisk=8192\0" \ + "mmcboot=" \ + "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \ + "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "verify=n\0" \ + "rootfstype=cramfs\0" \ + "mtdparts=" MTDPARTS_DEFAULT \ + "meminfo=mem=80M mem=256M@0x40000000\0" \ + "nfsroot=/nfsroot/arm\0" \ + "mmcblk=/dev/mmcblk1p1\0" \ + "bootblock=5\0" \ + "ubiblock=4\0" \ + "ubi=enabled" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "SMDK6442 # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* base address for uboot */ +#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x04800000) +#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x04800000) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ + +/* S5P6442 has 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 2 + +/* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE (80 << 20) /* 80 MB in Bank #1 */ + +/* SDRAM Bank #2 */ +#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) +#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in Bank #2 */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +/*----------------------------------------------------------------------- + * Boot configuration + */ +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */ +#define CONFIG_ENV_ADDR (256 << 10) /* 256 KiB, 0x40000 */ +#define CONFIG_ENV_OFFSET (256 << 10) /* 256 KiB, 0x40000 */ + +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_SAMSUNG_ONENAND 1 +#define CONFIG_SYS_ONENAND_BASE 0xB0000000 + +#define CONFIG_DOS_PARTITION 1 + +#endif /* __CONFIG_H */