[U-Boot] [PATCH 1/2] net: zynq: Use predefined macros instead of hardcoded value
MII is used by this driver.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/net/zynq_gem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 101489c..08056a4 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -338,7 +338,8 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) phy_detection(dev);
/* interface - look at tsec */ - phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0); + phydev = phy_connect(priv->bus, priv->phyaddr, dev, + PHY_INTERFACE_MODE_MII);
phydev->supported = supported | ADVERTISED_Pause | ADVERTISED_Asym_Pause; -- 1.8.2.3
Add missing header.
Warnings: drivers/net/zynq_gem.c:491:5: warning: symbol 'zynq_gem_initialize' was not declared. Should it be static? drivers/net/zynq_gem.c:542:5: warning: symbol 'zynq_gem_of_init' was not declared. Should it be static?
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/net/zynq_gem.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 08056a4..3cadd23 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -11,6 +11,7 @@
#include <common.h> #include <net.h> +#include <netdev.h> #include <config.h> #include <fdtdec.h> #include <libfdt.h> -- 1.8.2.3
participants (1)
-
Michal Simek