[U-Boot-Users] MPC5200 U-Boot startup code
Hello all,
I'm developing a boot loader application for an Embedded Planet Power PC 5200 based development board ep5200 and wanted to use U-Boot to do the booting portion. I was wondering if anyone out there has invented this wheel first however and had the necessary cpu and necessary board information for the U-Boot.
Thanks,
Mike
In message E3D7D9F21D28AB40831160B7184F24D706E0CCAC@l3c-xchg-disp1.displays.l-3com.com you wrote:
I'm developing a boot loader application for an Embedded Planet Power PC 5200 based development board ep5200 and wanted to use U-Boot to do the booting portion. I was wondering if anyone out there has invented this wheel first however and had the necessary cpu and necessary board information for the U-Boot.
U-Boot is working fine on may MPC5200 based boards, so the processor support is all in place and working.
The board support is all your's, of course.
------_=_NextPart_001_01C652A6.E7DC42BA Content-Type: text/html Content-Transfer-Encoding: quoted-printable
And please NEVER post HTML here!
Best regards,
Wolfgang Denk
participants (2)
-
Shearin, Michael ＠ DISPLAYS -
Wolfgang Denk