[U-Boot-Users] CF 5282 fec.c
I'm new on U-Boot and work on a MCF5282 port. I have modify the cvs source and U-Boot runs on my own MCF5282 board (I get a promt on serial line). But i get "Tx not ready" and "Tx Timeout" messages for each ethernet access. I discover the fec.c, and find out that only 10MBit haft duplex is use. Is there in implementation for full 100MBit use?
Jens,
Search the mailing list archives. There are multiple posts about 5282 ports, and some specifically about the fec.
-- Zachary P. Landau kapheine@gmail.com
Hallo Zachary,
I read the mail list and discover your implementation. My board works on network.
Thanks Jens
Zachary Landau schrieb:
I'm new on U-Boot and work on a MCF5282 port. I have modify the cvs source and U-Boot runs on my own MCF5282 board (I get a promt on serial line). But i get "Tx not ready" and "Tx Timeout" messages for each ethernet access. I discover the fec.c, and find out that only 10MBit haft duplex is use. Is there in implementation for full 100MBit use?
Jens,
Search the mailing list archives. There are multiple posts about 5282 ports, and some specifically about the fec.
-- Zachary P. Landau kapheine@gmail.com
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
participants (2)
-
Jens Scharsig -
Zachary Landau