gpio_get_values_as_int() should return an error if something goes wrong. Also provide gpio_claim_vector(), a function to request the GPIOs and set them to input mode. Otherwise callers have to do this themselves.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

drivers/gpio/gpio-uclass.c | 38 +++++++++++++++++++++++++++++++++++--- include/asm-generic/gpio.h | 15 ++++++++++++--- 2 files changed, 47 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index a69bbd2..6e05c54 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -495,22 +495,54 @@ int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize) return 0; }

+int gpio_claim_vector(const int *gpio_num_array, const char *fmt) +{ + int i, ret; + int gpio; + + for (i = 0; i < 32; i++) { + gpio = gpio_num_array[i]; + if (gpio == -1) + break; + ret = gpio_requestf(gpio, fmt, i); + if (ret) + goto err; + ret = gpio_direction_input(gpio); + if (ret) { + gpio_free(gpio); + goto err; + } + } + + return 0; +err: + for (i--; i >= 0; i--) + gpio_free(gpio_num_array[i]); + + return ret; +} + /* * get a number comprised of multiple GPIO values. gpio_num_array points to * the array of gpio pin numbers to scan, terminated by -1. */ -unsigned gpio_get_values_as_int(const int *gpio_num_array) +int gpio_get_values_as_int(const int *gpio_list) { int gpio; unsigned bitmask = 1; unsigned vector = 0; + int ret;

while (bitmask && - ((gpio = *gpio_num_array++) != -1)) { - if (gpio_get_value(gpio)) + ((gpio = *gpio_list++) != -1)) { + ret = gpio_get_value(gpio); + if (ret < 0) + return ret; + else if (ret) vector |= bitmask; bitmask <<= 1; } + return vector; }

diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 3b96b82..4752ea4 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -336,15 +336,24 @@ int gpio_lookup_name(const char *name, struct udevice **devp, unsigned int *offsetp, unsigned int *gpiop);

/** - * get_gpios() - Turn the values of a list of GPIOs into an integer + * gpio_get_values_as_int() - Turn the values of a list of GPIOs into an int * * This puts the value of the first GPIO into bit 0, the second into bit 1, * etc. then returns the resulting integer. * * @gpio_list: List of GPIOs to collect - * @return resulting integer value + * @return resulting integer value, or -ve on error */ -unsigned gpio_get_values_as_int(const int *gpio_list); +int gpio_get_values_as_int(const int *gpio_list); + +/** + * gpio_claim_vector() - claim a number of GPIOs for input + * + * @gpio_num_array: array of gpios to claim, terminated by -1 + * @fmt: format string for GPIO names, e.g. "board_id%d" + * @return 0 if OK, -ve on error + */ +int gpio_claim_vector(const int *gpio_num_array, const char *fmt);

/** * gpio_request_by_name() - Locate and request a GPIO by name

This is needed for tegra124 also, so make it common and add a header file for tegra124.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

arch/arm/cpu/armv7/tegra-common/Makefile | 1 + arch/arm/cpu/armv7/{tegra20 => tegra-common}/pwm.c | 0 arch/arm/cpu/armv7/tegra20/Makefile | 1 - arch/arm/include/asm/arch-tegra/pwm.h | 60 ++++++++++++++++++++++ arch/arm/include/asm/arch-tegra124/pwm.h | 14 +++++ arch/arm/include/asm/arch-tegra20/pwm.h | 54 ++----------------- 6 files changed, 79 insertions(+), 51 deletions(-) rename arch/arm/cpu/armv7/{tegra20 => tegra-common}/pwm.c (100%) create mode 100644 arch/arm/include/asm/arch-tegra/pwm.h create mode 100644 arch/arm/include/asm/arch-tegra124/pwm.h

diff --git a/arch/arm/cpu/armv7/tegra-common/Makefile b/arch/arm/cpu/armv7/tegra-common/Makefile index 463c260..91feb81 100644 --- a/arch/arm/cpu/armv7/tegra-common/Makefile +++ b/arch/arm/cpu/armv7/tegra-common/Makefile @@ -8,3 +8,4 @@ #

obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o +obj-$(CONFIG_PWM_TEGRA) += pwm.o diff --git a/arch/arm/cpu/armv7/tegra20/pwm.c b/arch/arm/cpu/armv7/tegra-common/pwm.c similarity index 100% rename from arch/arm/cpu/armv7/tegra20/pwm.c rename to arch/arm/cpu/armv7/tegra-common/pwm.c diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 9b4295c..56e54d0 100644 --- a/arch/arm/cpu/armv7/tegra20/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -7,5 +7,4 @@ # SPDX-License-Identifier: GPL-2.0+ #

-obj-$(CONFIG_PWM_TEGRA) += pwm.o obj-$(CONFIG_VIDEO_TEGRA) += display.o diff --git a/arch/arm/include/asm/arch-tegra/pwm.h b/arch/arm/include/asm/arch-tegra/pwm.h new file mode 100644 index 0000000..8e7397d --- /dev/null +++ b/arch/arm/include/asm/arch-tegra/pwm.h @@ -0,0 +1,60 @@ +/* + * Tegra pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_TEGRA_PWM_H +#define __ASM_ARCH_TEGRA_PWM_H + +/* This is a single PWM channel */ +struct pwm_ctlr { + uint control; /* Control register */ + uint reserved[3]; /* Space space */ +}; + +#define PWM_NUM_CHANNELS 4 + +/* PWM_CONTROLLER_PWM_CSR_0/1/2/3_0 */ +#define PWM_ENABLE_SHIFT 31 +#define PWM_ENABLE_MASK (0x1 << PWM_ENABLE_SHIFT) + +#define PWM_WIDTH_SHIFT 16 +#define PWM_WIDTH_MASK (0x7FFF << PWM_WIDTH_SHIFT) + +#define PWM_DIVIDER_SHIFT 0 +#define PWM_DIVIDER_MASK (0x1FFF << PWM_DIVIDER_SHIFT) + +/** + * Program the PWM with the given parameters. + * + * @param channel PWM channel to update + * @param rate Clock rate to use for PWM + * @param pulse_width high pulse width: 0=always low, 1=1/256 pulse high, + * n = n/256 pulse high + * @param freq_divider frequency divider value (1 to use rate as is) + */ +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider); + +/** + * Request a pwm channel as referenced by a device tree node. + * + * This channel can then be passed to pwm_enable(). + * + * @param blob Device tree blob + * @param node Node containing reference to pwm + * @param prop_name Property name of pwm reference + * @return channel number, if ok, else -1 + */ +int pwm_request(const void *blob, int node, const char *prop_name); + +/** + * Set up the pwm controller, by looking it up in the fdt. + * + * @return 0 if ok, -1 if the device tree node was not found or invalid. + */ +int pwm_init(const void *blob); + +#endif /* __ASM_ARCH_TEGRA_PWM_H */ diff --git a/arch/arm/include/asm/arch-tegra124/pwm.h b/arch/arm/include/asm/arch-tegra124/pwm.h new file mode 100644 index 0000000..3d2c432 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/pwm.h @@ -0,0 +1,14 @@ +/* + * Tegra pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_TEGRA124_PWM_H +#define __ASM_ARCH_TEGRA124_PWM_H + +#include <asm/arch-tegra/pwm.h> + +#endif /* __ASM_ARCH_TEGRA124_PWM_H */ diff --git a/arch/arm/include/asm/arch-tegra20/pwm.h b/arch/arm/include/asm/arch-tegra20/pwm.h index 8e7397d..2207d9c 100644 --- a/arch/arm/include/asm/arch-tegra20/pwm.h +++ b/arch/arm/include/asm/arch-tegra20/pwm.h @@ -6,55 +6,9 @@ * SPDX-License-Identifier: GPL-2.0+ */

-#ifndef __ASM_ARCH_TEGRA_PWM_H -#define __ASM_ARCH_TEGRA_PWM_H +#ifndef __ASM_ARCH_TEGRA20_PWM_H +#define __ASM_ARCH_TEGRA20_PWM_H

-/* This is a single PWM channel */ -struct pwm_ctlr { - uint control; /* Control register */ - uint reserved[3]; /* Space space */ -}; +#include <asm/arch-tegra/pwm.h>

-#define PWM_NUM_CHANNELS 4 - -/* PWM_CONTROLLER_PWM_CSR_0/1/2/3_0 */ -#define PWM_ENABLE_SHIFT 31 -#define PWM_ENABLE_MASK (0x1 << PWM_ENABLE_SHIFT) - -#define PWM_WIDTH_SHIFT 16 -#define PWM_WIDTH_MASK (0x7FFF << PWM_WIDTH_SHIFT) - -#define PWM_DIVIDER_SHIFT 0 -#define PWM_DIVIDER_MASK (0x1FFF << PWM_DIVIDER_SHIFT) - -/** - * Program the PWM with the given parameters. - * - * @param channel PWM channel to update - * @param rate Clock rate to use for PWM - * @param pulse_width high pulse width: 0=always low, 1=1/256 pulse high, - * n = n/256 pulse high - * @param freq_divider frequency divider value (1 to use rate as is) - */ -void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider); - -/** - * Request a pwm channel as referenced by a device tree node. - * - * This channel can then be passed to pwm_enable(). - * - * @param blob Device tree blob - * @param node Node containing reference to pwm - * @param prop_name Property name of pwm reference - * @return channel number, if ok, else -1 - */ -int pwm_request(const void *blob, int node, const char *prop_name); - -/** - * Set up the pwm controller, by looking it up in the fdt. - * - * @return 0 if ok, -1 if the device tree node was not found or invalid. - */ -int pwm_init(const void *blob); - -#endif /* __ASM_ARCH_TEGRA_PWM_H */ +#endif /* __ASM_ARCH_TEGRA20_PWM_H */

This is only used by Nvidia boards, so move it into nvidia/common to simplify things.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

arch/arm/cpu/tegra-common/board.c | 8 -------- board/nvidia/common/board.c | 13 +++++++++---- 2 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c index b6a84a5..67ee8c4 100644 --- a/arch/arm/cpu/tegra-common/board.c +++ b/arch/arm/cpu/tegra-common/board.c @@ -58,14 +58,6 @@ int dram_init(void) return 0; }

-#ifdef CONFIG_DISPLAY_BOARDINFO -int checkboard(void) -{ - printf("Board: %s\n", sysinfo.board_string); - return 0; -} -#endif /* CONFIG_DISPLAY_BOARDINFO */ - static int uart_configs[] = { #if defined(CONFIG_TEGRA20) #if defined(CONFIG_TEGRA_UARTA_UAA_UAB) diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 80ef8fd..128b5fb 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -52,10 +52,6 @@ U_BOOT_DEVICE(tegra_gpios) = { }; #endif

-const struct tegra_sysinfo sysinfo = { - CONFIG_TEGRA_BOARD_STRING -}; - __weak void pinmux_init(void) {} __weak void pin_mux_usb(void) {} __weak void pin_mux_spi(void) {} @@ -84,6 +80,15 @@ static void power_det_init(void) #endif }

+#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board: %s\n", CONFIG_TEGRA_BOARD_STRING); + + return 0; +} +#endif /* CONFIG_DISPLAY_BOARDINFO */ + /* * Routine: board_init * Description: Early hardware init.

With the full PMIC framework we may be able to avoid this. But for now we need access to the PMIC.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

drivers/power/as3722.c | 16 +++++++++++++--- include/power/as3722.h | 3 +++ 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/power/as3722.c b/drivers/power/as3722.c index a60bb5f..c09e1de 100644 --- a/drivers/power/as3722.c +++ b/drivers/power/as3722.c @@ -27,7 +27,7 @@ #define AS3722_DEVICE_ID 0x0c #define AS3722_ASIC_ID2 0x91

-static int as3722_read(struct udevice *pmic, u8 reg, u8 *value) +int as3722_read(struct udevice *pmic, u8 reg, u8 *value) { int err;

@@ -38,7 +38,7 @@ static int as3722_read(struct udevice *pmic, u8 reg, u8 *value) return 0; }

-static int as3722_write(struct udevice *pmic, u8 reg, u8 value) +int as3722_write(struct udevice *pmic, u8 reg, u8 value) { int err;

@@ -234,6 +234,15 @@ int as3722_gpio_direction_output(struct udevice *pmic, unsigned int gpio, return 0; }

+/* Temporary function until we get the pmic framework */ +int as3722_get(struct udevice **devp) +{ + int bus = 0; + int address = 0x40; + + return i2c_get_chip_for_busnum(bus, address, 1, devp); +} + int as3722_init(struct udevice **devp) { struct udevice *pmic; @@ -258,7 +267,8 @@ int as3722_init(struct udevice **devp)

debug("AS3722 revision %#x found on I2C bus %u, address %#x\n", revision, bus, address); - *devp = pmic; + if (devp) + *devp = pmic;

return 0; } diff --git a/include/power/as3722.h b/include/power/as3722.h index aa966d2..0f22482 100644 --- a/include/power/as3722.h +++ b/include/power/as3722.h @@ -23,5 +23,8 @@ int as3722_gpio_configure(struct udevice *pmic, unsigned int gpio, unsigned long flags); int as3722_gpio_direction_output(struct udevice *pmic, unsigned int gpio, unsigned int level); +int as3722_read(struct udevice *pmic, u8 reg, u8 *value); +int as3722_write(struct udevice *pmic, u8 reg, u8 value); +int as3722_get(struct udevice **devp);

#endif /* __POWER_AS3722_H__ */

Add support for this PMIC which is used on some Tegra124 boards.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

board/nvidia/common/board.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 0a33bc5..18e1709 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -7,6 +7,7 @@

#include <common.h> #include <dm.h> +#include <errno.h> #include <ns16550.h> #include <linux/compiler.h> #include <asm/io.h> @@ -39,6 +40,7 @@ #include <asm/arch-tegra/mmc.h> #endif #include <asm/arch-tegra/xusb-padctl.h> +#include <power/as3722.h> #include <i2c.h> #include <spi.h> #include "emc.h" @@ -144,6 +146,11 @@ int board_init(void) debug("Memory controller init failed: %d\n", err); # endif # endif /* CONFIG_TEGRA_PMU */ +#ifdef CONFIG_AS3722_POWER + err = as3722_init(NULL); + if (err && err != -ENODEV) + return err; +#endif #endif /* CONFIG_SYS_I2C_TEGRA */

#ifdef CONFIG_USB_EHCI_TEGRA

This peripheral is required to get the LCD display running. Add it to tegra124 and also bring in the binding file from Linux 3.18

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

arch/arm/dts/tegra124.dtsi | 84 +++++ .../gpu/nvidia,tegra20-host1x.txt | 372 +++++++++++++++++++++ 2 files changed, 456 insertions(+) create mode 100644 doc/device-tree-bindings/gpu/nvidia,tegra20-host1x.txt

diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi index 9fa141d..43b7f22 100644 --- a/arch/arm/dts/tegra124.dtsi +++ b/arch/arm/dts/tegra124.dtsi @@ -76,6 +76,85 @@ }; };

+ host1x@50000000 { + compatible = "nvidia,tegra124-host1x", "simple-bus"; + reg = <0x50000000 0x00034000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA124_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x01000000>; + + dc@54200000 { + compatible = "nvidia,tegra124-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DISP1>, + <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + nvidia,head = <0>; + }; + + dc@54240000 { + compatible = "nvidia,tegra124-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DISP2>, + <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + nvidia,head = <1>; + }; + + hdmi@54280000 { + compatible = "nvidia,tegra124-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDMI>, + <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + sor@54540000 { + compatible = "nvidia,tegra124-sor"; + reg = <0x54540000 0x00040000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SOR0>, + <&tegra_car TEGRA124_CLK_PLL_D_OUT0>, + <&tegra_car TEGRA124_CLK_PLL_DP>, + <&tegra_car TEGRA124_CLK_CLK_M>; + clock-names = "sor", "parent", "dp", "safe"; + resets = <&tegra_car 182>; + reset-names = "sor"; + status = "disabled"; + }; + + dpaux: dpaux@545c0000 { + compatible = "nvidia,tegra124-dpaux"; + reg = <0x545c0000 0x00040000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DPAUX>, + <&tegra_car TEGRA124_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 181>; + reset-names = "dpaux"; + status = "disabled"; + }; + }; + gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -349,6 +428,11 @@ clocks = <&tegra_car 105>; };

+ pmc@7000e400 { + compatible = "nvidia,tegra124-pmc"; + reg = <0x7000e400 0x400>; + }; + padctl: padctl@7009f000 { compatible = "nvidia,tegra124-xusb-padctl"; reg = <0x7009f000 0x1000>; diff --git a/doc/device-tree-bindings/gpu/nvidia,tegra20-host1x.txt b/doc/device-tree-bindings/gpu/nvidia,tegra20-host1x.txt new file mode 100644 index 0000000..b48f4ef --- /dev/null +++ b/doc/device-tree-bindings/gpu/nvidia,tegra20-host1x.txt @@ -0,0 +1,372 @@ +NVIDIA Tegra host1x + +Required properties: +- compatible: "nvidia,tegra<chip>-host1x" +- reg: Physical base address and length of the controller's registers. +- interrupts: The interrupt outputs from the controller. +- #address-cells: The number of cells used to represent physical base addresses + in the host1x address space. Should be 1. +- #size-cells: The number of cells used to represent the size of an address + range in the host1x address space. Should be 1. +- ranges: The mapping of the host1x address space to the CPU address space. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - host1x + +The host1x top-level node defines a number of children, each representing one +of the following host1x client modules: + +- mpe: video encoder + + Required properties: + - compatible: "nvidia,tegra<chip>-mpe" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - mpe + +- vi: video input + + Required properties: + - compatible: "nvidia,tegra<chip>-vi" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vi + +- epp: encoder pre-processor + + Required properties: + - compatible: "nvidia,tegra<chip>-epp" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - epp + +- isp: image signal processor + + Required properties: + - compatible: "nvidia,tegra<chip>-isp" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - isp + +- gr2d: 2D graphics engine + + Required properties: + - compatible: "nvidia,tegra<chip>-gr2d" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 2d + +- gr3d: 3D graphics engine + + Required properties: + - compatible: "nvidia,tegra<chip>-gr3d" + - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + (This property may be omitted if the only clock in the list is "3d") + - 3d + This MUST be the first entry. + - 3d2 (Only required on SoCs with two 3D clocks) + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 3d + - 3d2 (Only required on SoCs with two 3D clocks) + +- dc: display controller + + Required properties: + - compatible: "nvidia,tegra<chip>-dc" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dc + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dc + - nvidia,head: The number of the display controller head. This is used to + setup the various types of output to receive video data from the given + head. + + Each display controller node has a child node, named "rgb", that represents + the RGB output associated with the controller. It can take the following + optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + +- hdmi: High Definition Multimedia Interface + + Required properties: + - compatible: "nvidia,tegra<chip>-hdmi" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - hdmi-supply: supply for the +5V HDMI connector pin + - vdd-supply: regulator for supply voltage + - pll-supply: regulator for PLL + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - hdmi + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - hdmi + + Optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + +- tvo: TV encoder output + + Required properties: + - compatible: "nvidia,tegra<chip>-tvo" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +- dsi: display serial interface + + Required properties: + - compatible: "nvidia,tegra<chip>-dsi" + - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dsi + This MUST be the first entry. + - lp + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dsi + - avdd-dsi-supply: phandle of a supply that powers the DSI controller + - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying + which pads are used by this DSI output and need to be calibrated. See also + ../mipi/nvidia,tegra114-mipi.txt. + + Optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + +- sor: serial output resource + + Required properties: + - compatible: "nvidia,tegra124-sor" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - sor: clock input for the SOR hardware + - parent: input for the pixel clock + - dp: reference clock for the SOR clock + - safe: safe reference for the SOR clock during power up + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - sor + + Optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + + Optional properties when driving an eDP output: + - nvidia,dpaux: phandle to a DispayPort AUX interface + +- dpaux: DisplayPort AUX interface + - compatible: "nvidia,tegra124-dpaux" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dpaux: clock input for the DPAUX hardware + - parent: reference clock + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dpaux + - vdd-supply: phandle of a supply that powers the DisplayPort link + +Example: + +/ { + ... + + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + clocks = <&tegra_car TEGRA20_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra20-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; + }; + + vi { + compatible = "nvidia,tegra20-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + clocks = <&tegra_car TEGRA20_CLK_VI>; + resets = <&tegra_car 100>; + reset-names = "vi"; + }; + + epp { + compatible = "nvidia,tegra20-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; + }; + + isp { + compatible = "nvidia,tegra20-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; + }; + + gr2d { + compatible = "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; + }; + + gr3d { + compatible = "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; + }; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP2>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + clocks = <&tegra_car TEGRA20_CLK_HDMI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_DSI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + status = "disabled"; + }; + }; + + ... +};

The get_pll() function can do the wrong thing if passed values that are out of range. Add checks for this and add a function which can return a 'simple' PLL. This can be defined by SoCs with their own clocks.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

arch/arm/cpu/tegra-common/clock.c | 30 ++++++++++++++++++++++++++---- arch/arm/include/asm/arch-tegra/clock.h | 3 +++ 2 files changed, 29 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c index 11c7435..87c2950 100644 --- a/arch/arm/cpu/tegra-common/clock.c +++ b/arch/arm/cpu/tegra-common/clock.c @@ -80,9 +80,18 @@ static struct clk_pll *get_pll(enum clock_id clkid) (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;

assert(clock_id_is_pll(clkid)); + if (clkid >= (enum clock_id)TEGRA_CLK_PLLS) { + debug("%s: Invalid PLL\n", __func__); + return NULL; + } return &clkrst->crc_pll[clkid]; }

+__weak struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid) +{ + return NULL; +} + int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn, u32 *divp, u32 *cpcon, u32 *lfcon) { @@ -109,7 +118,7 @@ unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn, u32 divp, u32 cpcon, u32 lfcon) { struct clk_pll *pll = get_pll(clkid); - u32 data; + u32 misc_data, data;

/* * We cheat by treating all PLL (except PLLU) in the same fashion. @@ -118,8 +127,7 @@ unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn, * - DCCON is always 0, doesn't conflict * - M,N, P of PLLP values are ignored for PLLP */ - data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT); - writel(data, &pll->pll_misc); + misc_data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);

data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) | (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT); @@ -128,7 +136,19 @@ unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn, data |= divp << PLLU_VCO_FREQ_SHIFT; else data |= divp << PLL_DIVP_SHIFT; - writel(data, &pll->pll_base); + if (pll) { + writel(misc_data, &pll->pll_misc); + writel(data, &pll->pll_base); + } else { + struct clk_pll_simple *pll = clock_get_simple_pll(clkid); + + if (!pll) { + debug("%s: Uknown simple PLL %d\n", __func__, clkid); + return 0; + } + writel(misc_data, &pll->pll_misc); + writel(data, &pll->pll_base); + }

/* calculate the stable time */ return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US; @@ -430,6 +450,8 @@ unsigned clock_get_rate(enum clock_id clkid) return parent_rate;

pll = get_pll(clkid); + if (!pll) + return 0; base = readl(&pll->pll_base);

/* Oh for bf_unpack()... */ diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h index 9d8114c..a641a16 100644 --- a/arch/arm/include/asm/arch-tegra/clock.h +++ b/arch/arm/include/asm/arch-tegra/clock.h @@ -265,6 +265,9 @@ void clock_early_init(void); /* Returns a pointer to the clock source register for a peripheral */ u32 *get_periph_source_reg(enum periph_id periph_id);

+/* Returns a pointer to the given 'simple' PLL */ +struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid); + /** * Given a peripheral ID and the required source clock, this returns which * value should be programmed into the source mux for that peripheral.

Add functions to provide access to the display clocks on Tegra124 including setting the clock rate for an EDP display.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

arch/arm/cpu/tegra-common/clock.c | 2 + arch/arm/cpu/tegra124-common/clock.c | 141 +++++++++++++++++++++- arch/arm/include/asm/arch-tegra/clk_rst.h | 15 ++- arch/arm/include/asm/arch-tegra124/clock-tables.h | 3 +- arch/arm/include/asm/arch-tegra124/clock.h | 21 ++++ 5 files changed, 173 insertions(+), 9 deletions(-)

diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c index 495cde3..0d36b02 100644 --- a/arch/arm/cpu/tegra-common/clock.c +++ b/arch/arm/cpu/tegra-common/clock.c @@ -592,6 +592,7 @@ void clock_init(void) pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY); pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH); pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL); + pll_rate[CLOCK_ID_DISPLAY] = clock_get_rate(CLOCK_ID_DISPLAY); pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC); pll_rate[CLOCK_ID_SFROM32KHZ] = 32768; pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU); @@ -599,6 +600,7 @@ void clock_init(void) debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]); debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]); debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]); + debug("PLLD = %d\n", pll_rate[CLOCK_ID_DISPLAY]); debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);

/* Do any special system timer/TSC setup */ diff --git a/arch/arm/cpu/tegra124-common/clock.c b/arch/arm/cpu/tegra124-common/clock.c index fc8bd19..2d17550 100644 --- a/arch/arm/cpu/tegra124-common/clock.c +++ b/arch/arm/cpu/tegra124-common/clock.c @@ -42,6 +42,7 @@ enum clock_type_id { CLOCK_TYPE_ASPTE, CLOCK_TYPE_PMDACD2T, CLOCK_TYPE_PCST, + CLOCK_TYPE_DP,

CLOCK_TYPE_PC2CC3M, CLOCK_TYPE_PC2CC3S_T, @@ -101,6 +102,10 @@ static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), MASK_BITS_31_28}, + /* CLOCK_TYPE_DP */ + { CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_28},

/* Additional clock types on Tegra114+ */ /* CLOCK_TYPE_PC2CC3M */ @@ -259,7 +264,7 @@ static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {

/* 0x58 */ TYPE(PERIPHC_58h, CLOCK_TYPE_NONE), - TYPE(PERIPHC_59h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SOR, CLOCK_TYPE_NONE), TYPE(PERIPHC_5ah, CLOCK_TYPE_NONE), TYPE(PERIPHC_5bh, CLOCK_TYPE_NONE), TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), @@ -546,7 +551,7 @@ static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { NONE(X_RESERVED19), NONE(ADX1), NONE(DPAUX), - NONE(SOR0), + PERIPHC_SOR, NONE(X_RESERVED23),

/* 184 */ @@ -594,7 +599,10 @@ u32 *get_periph_source_reg(enum periph_id periph_id) assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); internal_id = periph_id_to_internal_id[periph_id]; assert(internal_id != -1); - if (internal_id >= PERIPHC_VW_FIRST) { + if (internal_id >= PERIPHC_X_FIRST) { + internal_id -= PERIPHC_X_FIRST; + return &clkrst->crc_clk_src_x[internal_id]; + } else if (internal_id >= PERIPHC_VW_FIRST) { internal_id -= PERIPHC_VW_FIRST; return &clkrst->crc_clk_src_vw[internal_id]; } else { @@ -657,8 +665,10 @@ void clock_set_enable(enum periph_id periph_id, int enable) assert(clock_periph_id_isvalid(periph_id)); if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; - else + else if ((int)periph_id < PERIPH_ID_X_FIRST) clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; + else + clk = &clkrst->crc_clk_out_enb_x; reg = readl(clk); if (enable) reg |= PERIPH_MASK(periph_id); @@ -678,8 +688,10 @@ void reset_set_enable(enum periph_id periph_id, int enable) assert(clock_periph_id_isvalid(periph_id)); if (periph_id < PERIPH_ID_VW_FIRST) reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; - else + else if ((int)periph_id < PERIPH_ID_X_FIRST) reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; + else + reset = &clkrst->crc_rst_devices_x; reg = readl(reset); if (enable) reg |= PERIPH_MASK(periph_id); @@ -933,3 +945,122 @@ int tegra_plle_enable(void)

return 0; } + +void clock_sor_enable_edp_clock(void) +{ + u32 *reg; + + /* uses PLLP, has a non-standard bit layout. */ + reg = get_periph_source_reg(PERIPH_ID_SOR0); + setbits_le32(reg, SOR0_CLK_SEL0); +} + +u32 clock_set_display_rate(u32 frequency) +{ + /** + * plld (fo) = vco >> p, where 500MHz < vco < 1000MHz + * = (cf * n) >> p, where 1MHz < cf < 6MHz + * = ((ref / m) * n) >> p + * + * Iterate the possible values of p (3 bits, 2^7) to find out a minimum + * safe vco, then find best (m, n). since m has only 5 bits, we can + * iterate all possible values. Note Tegra 124 supports 11 bits for n, + * but our pll_fields has only 10 bits for n. + * + * Note values undershoot or overshoot target output frequency may not + * work if the values are not in "safe" range by panel specification. + */ + u32 ref = clock_get_rate(CLOCK_ID_OSC); + u32 divm, divn, divp, cpcon; + u32 cf, vco, rounded_rate = frequency; + u32 diff, best_diff, best_m = 0, best_n = 0, best_p; + const u32 max_m = 1 << 5, max_n = 1 << 10, max_p = 1 << 3, + mhz = 1000 * 1000, min_vco = 500 * mhz, max_vco = 1000 * mhz, + min_cf = 1 * mhz, max_cf = 6 * mhz; + int mux_bits, divider_bits, source; + + for (divp = 0, vco = frequency; vco < min_vco && divp < max_p; divp++) + vco <<= 1; + + if (vco < min_vco || vco > max_vco) { + printf("%s: Cannot find out a supported VCO for Frequency (%u)\n", + __func__, frequency); + return 0; + } + + best_p = divp; + best_diff = vco; + + for (divm = 1; divm < max_m && best_diff; divm++) { + cf = ref / divm; + if (cf < min_cf) + break; + if (cf > max_cf) + continue; + + divn = vco / cf; + if (divn >= max_n) + continue; + + diff = vco - divn * cf; + if (divn + 1 < max_n && diff > cf / 2) { + divn++; + diff = cf - diff; + } + + if (diff >= best_diff) + continue; + + best_diff = diff; + best_m = divm; + best_n = divn; + } + + if (best_n < 50) + cpcon = 2; + else if (best_n < 300) + cpcon = 3; + else if (best_n < 600) + cpcon = 8; + else + cpcon = 12; + + if (best_diff) { + printf("%s: Failed to match output frequency %u, best difference is %u\n", + __func__, frequency, best_diff); + rounded_rate = (ref / best_m * best_n) >> best_p; + } + + debug("%s: PLLD=%u ref=%u, m/n/p/cpcon=%u/%u/%u/%u\n", + __func__, rounded_rate, ref, best_m, best_n, best_p, cpcon); + + source = get_periph_clock_source(PERIPH_ID_DISP1, CLOCK_ID_DISPLAY, + &mux_bits, &divider_bits); + clock_ll_set_source_bits(PERIPH_ID_DISP1, mux_bits, source); + clock_set_rate(CLOCK_ID_DISPLAY, best_n, best_m, best_p, cpcon); + + return rounded_rate; +} + +void clock_set_up_plldp(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 value; + + value = PLLDP_SS_CFG_UNDOCUMENTED | PLLDP_SS_CFG_DITHER; + writel(value | PLLDP_SS_CFG_CLAMP, &clkrst->crc_plldp_ss_cfg); + clock_start_pll(CLOCK_ID_DP, 1, 90, 3, 0, 0); + writel(value, &clkrst->crc_plldp_ss_cfg); +} + +struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + + if (clkid == CLOCK_ID_DP) + return &clkrst->plldp; + + return NULL; +} diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h index 7d28e16..de50e08 100644 --- a/arch/arm/include/asm/arch-tegra/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra/clk_rst.h @@ -202,9 +202,13 @@ struct clk_rst_ctlr { uint crc_reserved52[1]; /* _reserved_52, 0x554 */ uint crc_super_gr3d_clk_div; /* _SUPER_GR3D_CLK_DIVIDER_0, 0x558 */ uint crc_spare_reg0; /* _SPARE_REG0_0, 0x55C */ - - /* Tegra124 - skip to 0x600 here for new CLK_SOURCE_ regs */ - uint crc_reserved60[40]; /* _reserved_60, 0x560 - 0x5FC */ + u32 _rsv32[4]; /* 0x560-0x56c */ + u32 crc_plld2_ss_cfg; /* _PLLD2_SS_CFG 0x570 */ + u32 _rsv32_1[7]; /* 0x574-58c */ + struct clk_pll_simple plldp; /* _PLLDP_BASE, 0x590 _PLLDP_MISC */ + u32 crc_plldp_ss_cfg; /* _PLLDP_SS_CFG, 0x598 */ + u32 _rsrv32_2[25]; + /* Tegra124 */ uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x678 */ };

@@ -440,4 +444,9 @@ enum { #define PLLX_IDDQ_SHIFT 3 #define PLLX_IDDQ_MASK (1U << PLLX_IDDQ_SHIFT)

+/* CLK_RST_PLLDP_SS_CFG */ +#define PLLDP_SS_CFG_CLAMP (1 << 22) +#define PLLDP_SS_CFG_UNDOCUMENTED (1 << 24) +#define PLLDP_SS_CFG_DITHER (1 << 28) + #endif /* _TEGRA_CLK_RST_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/clock-tables.h b/arch/arm/include/asm/arch-tegra124/clock-tables.h index daf9a2b..7005855 100644 --- a/arch/arm/include/asm/arch-tegra124/clock-tables.h +++ b/arch/arm/include/asm/arch-tegra124/clock-tables.h @@ -25,6 +25,7 @@ enum clock_id { CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE, CLOCK_ID_EPCI, CLOCK_ID_SFROM32KHZ, + CLOCK_ID_DP, /* Special for Tegra124 */

/* These are the base clocks (inputs to the Tegra SoC) */ CLOCK_ID_32KHZ, @@ -424,7 +425,7 @@ enum periphc_internal_id {

/* 0x58 */ PERIPHC_58h, - PERIPHC_59h, + PERIPHC_SOR, PERIPHC_5ah, PERIPHC_5bh, PERIPHC_SATAOOB, diff --git a/arch/arm/include/asm/arch-tegra124/clock.h b/arch/arm/include/asm/arch-tegra124/clock.h index 8e65086..e202cc5 100644 --- a/arch/arm/include/asm/arch-tegra124/clock.h +++ b/arch/arm/include/asm/arch-tegra124/clock.h @@ -16,6 +16,27 @@ #define OSC_FREQ_SHIFT 28 #define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT)

+/* CLK_RST_CONTROLLER_CLK_SOURCE_SOR0_0 */ +#define SOR0_CLK_SEL0 (1 << 14) +#define SOR0_CLK_SEL1 (1 << 15) + int tegra_plle_enable(void);

+void clock_sor_enable_edp_clock(void); + +/** + * clock_set_display_rate() - Set the display clock rate + * + * @frequency: the requested PLLD frequency + * + * Return the PLLD frequenc (which may not quite what was requested), or 0 + * on failure + */ +u32 clock_set_display_rate(u32 frequency); + +/** + * clock_set_up_plldp() - Set up the EDP clock ready for use + */ +void clock_set_up_plldp(void); + #endif /* _TEGRA124_CLOCK_H_ */

This file (from Linux 3.17) provides defines for display port. Use it so that our naming is consistent with Linux.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

include/linux/drm_dp_helper.h | 405 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 405 insertions(+) create mode 100644 include/linux/drm_dp_helper.h

diff --git a/include/linux/drm_dp_helper.h b/include/linux/drm_dp_helper.h new file mode 100644 index 0000000..86b06e1 --- /dev/null +++ b/include/linux/drm_dp_helper.h @@ -0,0 +1,405 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_HELPER_H_ +#define _DRM_DP_HELPER_H_ + +/* + * Unless otherwise noted, all values are from the DP 1.1a spec. Note that + * DP and DPCD versions are independent. Differences from 1.0 are not noted, + * 1.0 devices basically don't exist in the wild. + * + * Abbreviations, in chronological order: + * + * eDP: Embedded DisplayPort version 1 + * DPI: DisplayPort Interoperability Guideline v1.1a + * 1.2: DisplayPort 1.2 + * MST: Multistream Transport - part of DP 1.2a + * + * 1.2 formally includes both eDP and DPI definitions. + */ + +#define DP_AUX_I2C_WRITE 0x0 +#define DP_AUX_I2C_READ 0x1 +#define DP_AUX_I2C_STATUS 0x2 +#define DP_AUX_I2C_MOT 0x4 +#define DP_AUX_NATIVE_WRITE 0x8 +#define DP_AUX_NATIVE_READ 0x9 + +#define DP_AUX_NATIVE_REPLY_ACK (0x0 << 0) +#define DP_AUX_NATIVE_REPLY_NACK (0x1 << 0) +#define DP_AUX_NATIVE_REPLY_DEFER (0x2 << 0) +#define DP_AUX_NATIVE_REPLY_MASK (0x3 << 0) + +#define DP_AUX_I2C_REPLY_ACK (0x0 << 2) +#define DP_AUX_I2C_REPLY_NACK (0x1 << 2) +#define DP_AUX_I2C_REPLY_DEFER (0x2 << 2) +#define DP_AUX_I2C_REPLY_MASK (0x3 << 2) + +/* AUX CH addresses */ +/* DPCD */ +#define DP_DPCD_REV 0x000 + +#define DP_MAX_LINK_RATE 0x001 + +#define DP_MAX_LANE_COUNT 0x002 +# define DP_MAX_LANE_COUNT_MASK 0x1f +# define DP_TPS3_SUPPORTED (1 << 6) /* 1.2 */ +# define DP_ENHANCED_FRAME_CAP (1 << 7) + +#define DP_MAX_DOWNSPREAD 0x003 +# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6) + +#define DP_NORP 0x004 + +#define DP_DOWNSTREAMPORT_PRESENT 0x005 +# define DP_DWN_STRM_PORT_PRESENT (1 << 0) +# define DP_DWN_STRM_PORT_TYPE_MASK 0x06 +# define DP_DWN_STRM_PORT_TYPE_DP (0 << 1) +# define DP_DWN_STRM_PORT_TYPE_ANALOG (1 << 1) +# define DP_DWN_STRM_PORT_TYPE_TMDS (2 << 1) +# define DP_DWN_STRM_PORT_TYPE_OTHER (3 << 1) +# define DP_FORMAT_CONVERSION (1 << 3) +# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) /* DPI */ + +#define DP_MAIN_LINK_CHANNEL_CODING 0x006 + +#define DP_DOWN_STREAM_PORT_COUNT 0x007 +# define DP_PORT_COUNT_MASK 0x0f +# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */ +# define DP_OUI_SUPPORT (1 << 7) + +#define DP_I2C_SPEED_CAP 0x00c /* DPI */ +# define DP_I2C_SPEED_1K 0x01 +# define DP_I2C_SPEED_5K 0x02 +# define DP_I2C_SPEED_10K 0x04 +# define DP_I2C_SPEED_100K 0x08 +# define DP_I2C_SPEED_400K 0x10 +# define DP_I2C_SPEED_1M 0x20 + +#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */ +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */ + +/* Multiple stream transport */ +#define DP_FAUX_CAP 0x020 /* 1.2 */ +# define DP_FAUX_CAP_1 (1 << 0) + +#define DP_MSTM_CAP 0x021 /* 1.2 */ +# define DP_MST_CAP (1 << 0) + +#define DP_GUID 0x030 /* 1.2 */ + +#define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ +# define DP_PSR_IS_SUPPORTED 1 +#define DP_PSR_CAPS 0x071 /* XXX 1.2? */ +# define DP_PSR_NO_TRAIN_ON_EXIT 1 +# define DP_PSR_SETUP_TIME_330 (0 << 1) +# define DP_PSR_SETUP_TIME_275 (1 << 1) +# define DP_PSR_SETUP_TIME_220 (2 << 1) +# define DP_PSR_SETUP_TIME_165 (3 << 1) +# define DP_PSR_SETUP_TIME_110 (4 << 1) +# define DP_PSR_SETUP_TIME_55 (5 << 1) +# define DP_PSR_SETUP_TIME_0 (6 << 1) +# define DP_PSR_SETUP_TIME_MASK (7 << 1) +# define DP_PSR_SETUP_TIME_SHIFT 1 + +/* + * 0x80-0x8f describe downstream port capabilities, but there are two layouts + * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, + * each port's descriptor is one byte wide. If it was set, each port's is + * four bytes wide, starting with the one byte from the base info. As of + * DP interop v1.1a only VGA defines additional detail. + */ + +/* offset 0 */ +#define DP_DOWNSTREAM_PORT_0 0x80 +# define DP_DS_PORT_TYPE_MASK (7 << 0) +# define DP_DS_PORT_TYPE_DP 0 +# define DP_DS_PORT_TYPE_VGA 1 +# define DP_DS_PORT_TYPE_DVI 2 +# define DP_DS_PORT_TYPE_HDMI 3 +# define DP_DS_PORT_TYPE_NON_EDID 4 +# define DP_DS_PORT_HPD (1 << 3) +/* offset 1 for VGA is maximum megapixels per second / 8 */ +/* offset 2 */ +# define DP_DS_VGA_MAX_BPC_MASK (3 << 0) +# define DP_DS_VGA_8BPC 0 +# define DP_DS_VGA_10BPC 1 +# define DP_DS_VGA_12BPC 2 +# define DP_DS_VGA_16BPC 3 + +/* link configuration */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a +# define DP_LINK_BW_5_4 0x14 /* 1.2 */ + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_3 3 /* 1.2 */ +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_0 (0 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_1 (1 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_2 (2 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_3 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) +# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) /* eDP */ + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_I2C_SPEED_CONTROL_STATUS 0x109 /* DPI */ +/* bitmask as for DP_I2C_SPEED_CAP */ + +#define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */ + +#define DP_MSTM_CTRL 0x111 /* 1.2 */ +# define DP_MST_EN (1 << 0) +# define DP_UP_REQ_EN (1 << 1) +# define DP_UPSTREAM_IS_SRC (1 << 2) + +#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */ +# define DP_PSR_ENABLE (1 << 0) +# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) +# define DP_PSR_CRC_VERIFICATION (1 << 2) +# define DP_PSR_FRAME_CAPTURE (1 << 3) + +#define DP_ADAPTER_CTRL 0x1a0 +# define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0) + +#define DP_BRANCH_DEVICE_CTRL 0x1a1 +# define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0) + +#define DP_PAYLOAD_ALLOCATE_SET 0x1c0 +#define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1 +#define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2 + +#define DP_SINK_COUNT 0x200 +/* prior to 1.2 bit 7 was reserved mbz */ +# define DP_GET_SINK_COUNT(x) ((((x) & 0x80) >> 1) | ((x) & 0x3f)) +# define DP_SINK_CP_READY (1 << 6) + +#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201 +# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0) +# define DP_AUTOMATED_TEST_REQUEST (1 << 1) +# define DP_CP_IRQ (1 << 2) +# define DP_MCCS_IRQ (1 << 3) +# define DP_DOWN_REP_MSG_RDY (1 << 4) /* 1.2 MST */ +# define DP_UP_REQ_MSG_RDY (1 << 5) /* 1.2 MST */ +# define DP_SINK_SPECIFIC_IRQ (1 << 6) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ + DP_LANE_CHANNEL_EQ_DONE | \ + DP_LANE_SYMBOL_LOCKED) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +#define DP_TEST_REQUEST 0x218 +# define DP_TEST_LINK_TRAINING (1 << 0) +# define DP_TEST_LINK_VIDEO_PATTERN (1 << 1) +# define DP_TEST_LINK_EDID_READ (1 << 2) +# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */ +# define DP_TEST_LINK_FAUX_PATTERN (1 << 4) /* DPCD >= 1.2 */ + +#define DP_TEST_LINK_RATE 0x219 +# define DP_LINK_RATE_162 (0x6) +# define DP_LINK_RATE_27 (0xa) + +#define DP_TEST_LANE_COUNT 0x220 + +#define DP_TEST_PATTERN 0x221 + +#define DP_TEST_CRC_R_CR 0x240 +#define DP_TEST_CRC_G_Y 0x242 +#define DP_TEST_CRC_B_CB 0x244 + +#define DP_TEST_SINK_MISC 0x246 +#define DP_TEST_CRC_SUPPORTED (1 << 5) + +#define DP_TEST_RESPONSE 0x260 +# define DP_TEST_ACK (1 << 0) +# define DP_TEST_NAK (1 << 1) +# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2) + +#define DP_TEST_EDID_CHECKSUM 0x261 + +#define DP_TEST_SINK 0x270 +#define DP_TEST_SINK_START (1 << 0) + +#define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */ +# define DP_PAYLOAD_TABLE_UPDATED (1 << 0) +# define DP_PAYLOAD_ACT_HANDLED (1 << 1) + +#define DP_VC_PAYLOAD_ID_SLOT_1 0x2c1 /* 1.2 MST */ +/* up to ID_SLOT_63 at 0x2ff */ + +#define DP_SOURCE_OUI 0x300 +#define DP_SINK_OUI 0x400 +#define DP_BRANCH_OUI 0x500 + +#define DP_SET_POWER 0x600 +# define DP_SET_POWER_D0 0x1 +# define DP_SET_POWER_D3 0x2 +# define DP_SET_POWER_MASK 0x3 + +#define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REQ_BASE 0x1600 /* 1.2 MST */ + +#define DP_SINK_COUNT_ESI 0x2002 /* 1.2 */ +/* 0-5 sink count */ +# define DP_SINK_COUNT_CP_READY (1 << 6) + +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* 1.2 */ + +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */ + +#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ + +#define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ +# define DP_PSR_LINK_CRC_ERROR (1 << 0) +# define DP_PSR_RFB_STORAGE_ERROR (1 << 1) + +#define DP_PSR_ESI 0x2007 /* XXX 1.2? */ +# define DP_PSR_CAPS_CHANGE (1 << 0) + +#define DP_PSR_STATUS 0x2008 /* XXX 1.2? */ +# define DP_PSR_SINK_INACTIVE 0 +# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1 +# define DP_PSR_SINK_ACTIVE_RFB 2 +# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3 +# define DP_PSR_SINK_ACTIVE_RESYNC 4 +# define DP_PSR_SINK_INTERNAL_ERROR 7 +# define DP_PSR_SINK_STATE_MASK 0x07 + +/* DP 1.2 Sideband message defines */ +/* peer device type - DP 1.2a Table 2-92 */ +#define DP_PEER_DEVICE_NONE 0x0 +#define DP_PEER_DEVICE_SOURCE_OR_SST 0x1 +#define DP_PEER_DEVICE_MST_BRANCHING 0x2 +#define DP_PEER_DEVICE_SST_SINK 0x3 +#define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4 + +/* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */ +#define DP_LINK_ADDRESS 0x01 +#define DP_CONNECTION_STATUS_NOTIFY 0x02 +#define DP_ENUM_PATH_RESOURCES 0x10 +#define DP_ALLOCATE_PAYLOAD 0x11 +#define DP_QUERY_PAYLOAD 0x12 +#define DP_RESOURCE_STATUS_NOTIFY 0x13 +#define DP_CLEAR_PAYLOAD_ID_TABLE 0x14 +#define DP_REMOTE_DPCD_READ 0x20 +#define DP_REMOTE_DPCD_WRITE 0x21 +#define DP_REMOTE_I2C_READ 0x22 +#define DP_REMOTE_I2C_WRITE 0x23 +#define DP_POWER_UP_PHY 0x24 +#define DP_POWER_DOWN_PHY 0x25 +#define DP_SINK_EVENT_NOTIFY 0x30 +#define DP_QUERY_STREAM_ENC_STATUS 0x38 + +/* DP 1.2 MST sideband nak reasons - table 2.84 */ +#define DP_NAK_WRITE_FAILURE 0x01 +#define DP_NAK_INVALID_READ 0x02 +#define DP_NAK_CRC_FAILURE 0x03 +#define DP_NAK_BAD_PARAM 0x04 +#define DP_NAK_DEFER 0x05 +#define DP_NAK_LINK_FAILURE 0x06 +#define DP_NAK_NO_RESOURCES 0x07 +#define DP_NAK_DPCD_FAIL 0x08 +#define DP_NAK_I2C_NAK 0x09 +#define DP_NAK_ALLOCATE_FAIL 0x0a + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +/* Rest of file omitted as it is not used in U-Boot */ + +#endif /* _DRM_DP_HELPER_H_ */

eDP (Embedded DisplayPort) is a standard widely used in laptops to drive LCD panels. Add a uclass for this which supports a few simple operations.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: None Changes in v2: None

drivers/video/Kconfig | 7 ++++++ drivers/video/Makefile | 4 ++++ drivers/video/dp-uclass.c | 34 +++++++++++++++++++++++++++ include/displayport.h | 60 +++++++++++++++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + 5 files changed, 106 insertions(+) create mode 100644 drivers/video/dp-uclass.c create mode 100644 include/displayport.h

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 51728b3..62af63a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -88,3 +88,10 @@ config VIDEO_LCD_SPI_MISO hardware and LCD panel id retrieval (if the panel can report it). The option takes a string in the format understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H. + +config DISPLAY_PORT + bool "Enable DisplayPort support" + help + eDP (Embedded DisplayPort) is a standard widely used in laptops + to drive LCD panels. This framework provides support for enabling + these displays where supported by the video hardware. diff --git a/drivers/video/Makefile b/drivers/video/Makefile index af2d47b..8f83fdb 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -5,6 +5,10 @@ # SPDX-License-Identifier: GPL-2.0+ #

+ifdef CONFIG_DM +obj-$(CONFIG_DISPLAY_PORT) += dp-uclass.o +endif + obj-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o diff --git a/drivers/video/dp-uclass.c b/drivers/video/dp-uclass.c new file mode 100644 index 0000000..17f5de9 --- /dev/null +++ b/drivers/video/dp-uclass.c @@ -0,0 +1,34 @@ +/* + * Copyright 2014 Google Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <displayport.h> +#include <errno.h> + +int display_port_read_edid(struct udevice *dev, u8 *buf, int buf_size) +{ + struct dm_display_port_ops *ops = display_port_get_ops(dev); + + if (!ops || !ops->read_edid) + return -ENOSYS; + return ops->read_edid(dev, buf, buf_size); +} + +int display_port_enable(struct udevice *dev, int panel_bpp, + const struct display_timing *timing) +{ + struct dm_display_port_ops *ops = display_port_get_ops(dev); + + if (!ops || !ops->enable) + return -ENOSYS; + return ops->enable(dev, panel_bpp, timing); +} + +UCLASS_DRIVER(display_port) = { + .id = UCLASS_DISPLAY_PORT, + .name = "display_port", +}; diff --git a/include/displayport.h b/include/displayport.h new file mode 100644 index 0000000..f7c7e25 --- /dev/null +++ b/include/displayport.h @@ -0,0 +1,60 @@ +/* + * Copyright 2014 Google Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DISPLAYPORT_H +#define _DISPLAYPORT_H + +struct udevice; +struct display_timing; + +/** + * display_port_read_edid() - Read information from EDID + * + * @dev: Device to read from + * @buf: Buffer to read into (should be EDID_SIZE bytes) + * @buf_size: Buffer size (should be EDID_SIZE) + * @return number of bytes read, <=0 for error + */ +int display_port_read_edid(struct udevice *dev, u8 *buf, int buf_size); + +/** + * display_port_enable() - Enable a display port device + * + * @dev: Device to enable + * @panel_bpp: Number of bits per pixel for panel + * @timing: Display timings + * @return 0 if OK, -ve on error + */ +int display_port_enable(struct udevice *dev, int panel_bpp, + const struct display_timing *timing); + +struct dm_display_port_ops { + /** + * read_edid() - Read information from EDID + * + * @dev: Device to read from + * @buf: Buffer to read into (should be EDID_SIZE bytes) + * @buf_size: Buffer size (should be EDID_SIZE) + * @return number of bytes read, <=0 for error + */ + int (*read_edid)(struct udevice *dev, u8 *buf, int buf_size); + + /** + * enable() - Enable the display port device + * + * @dev: Device to enable + * @panel_bpp: Number of bits per pixel for panel + * @timing: Display timings + * @return 0 if OK, -ve on error + */ + int (*enable)(struct udevice *dev, int panel_bpp, + const struct display_timing *timing); +}; + +#define display_port_get_ops(dev) \ + ((struct dm_display_port_ops *)(dev)->driver->ops) + +#endif diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 91bb90d..24eefbe 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -34,6 +34,7 @@ enum uclass_id { UCLASS_I2C_GENERIC, /* Generic I2C device */ UCLASS_I2C_EEPROM, /* I2C EEPROM device */ UCLASS_MOD_EXP, /* RSA Mod Exp device */ + UCLASS_DISPLAY_PORT, /* Display port video */

UCLASS_COUNT, UCLASS_INVALID = -1,

The SOR is required for talking to eDP LCD panels. Add a driver for this which will be used by the DisplayPort driver.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Reorder parameters to tegra_dc_sor_attach() - Simplify timouts to remove repeated multiplication by 1000

Changes in v2: None

drivers/video/Makefile | 2 + drivers/video/tegra124/Makefile | 7 + drivers/video/tegra124/sor.c | 891 +++++++++++++++++++++++++++++++++++++++ drivers/video/tegra124/sor.h | 904 ++++++++++++++++++++++++++++++++++++++++ include/fdtdec.h | 3 + lib/fdtdec.c | 3 + 6 files changed, 1810 insertions(+) create mode 100644 drivers/video/tegra124/Makefile create mode 100644 drivers/video/tegra124/sor.c create mode 100644 drivers/video/tegra124/sor.h

diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 8f83fdb..fc33a90 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -52,3 +52,5 @@ obj-$(CONFIG_VIDEO_VESA) += vesa_fb.o obj-$(CONFIG_FORMIKE) += formike.o obj-$(CONFIG_AM335X_LCD) += am335x-fb.o obj-$(CONFIG_VIDEO_PARADE) += parade.o + +obj-${CONFIG_VIDEO_TEGRA124} += tegra124/ diff --git a/drivers/video/tegra124/Makefile b/drivers/video/tegra124/Makefile new file mode 100644 index 0000000..9aa81a5 --- /dev/null +++ b/drivers/video/tegra124/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2014 Google, Inc +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += sor.o diff --git a/drivers/video/tegra124/sor.c b/drivers/video/tegra124/sor.c new file mode 100644 index 0000000..347b387 --- /dev/null +++ b/drivers/video/tegra124/sor.c @@ -0,0 +1,891 @@ +/* + * Copyright (c) 2011-2013, NVIDIA Corporation. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/dc.h> +#include "displayport.h" +#include "sor.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define DEBUG_SOR 0 + +#define APBDEV_PMC_DPD_SAMPLE 0x20 +#define APBDEV_PMC_DPD_SAMPLE_ON_DISABLE 0 +#define APBDEV_PMC_DPD_SAMPLE_ON_ENABLE 1 +#define APBDEV_PMC_SEL_DPD_TIM 0x1c8 +#define APBDEV_PMC_SEL_DPD_TIM_SEL_DPD_TIM_DEFAULT 0x7f +#define APBDEV_PMC_IO_DPD2_REQ 0x1c0 +#define APBDEV_PMC_IO_DPD2_REQ_LVDS_SHIFT 25 +#define APBDEV_PMC_IO_DPD2_REQ_LVDS_OFF (0 << 25) +#define APBDEV_PMC_IO_DPD2_REQ_LVDS_ON (1 << 25) +#define APBDEV_PMC_IO_DPD2_REQ_CODE_SHIFT 30 +#define APBDEV_PMC_IO_DPD2_REQ_CODE_DEFAULT_MASK (0x3 << 30) +#define APBDEV_PMC_IO_DPD2_REQ_CODE_IDLE (0 << 30) +#define APBDEV_PMC_IO_DPD2_REQ_CODE_DPD_OFF (1 << 30) +#define APBDEV_PMC_IO_DPD2_REQ_CODE_DPD_ON (2 << 30) +#define APBDEV_PMC_IO_DPD2_STATUS 0x1c4 +#define APBDEV_PMC_IO_DPD2_STATUS_LVDS_SHIFT 25 +#define APBDEV_PMC_IO_DPD2_STATUS_LVDS_OFF (0 << 25) +#define APBDEV_PMC_IO_DPD2_STATUS_LVDS_ON (1 << 25) + +static inline u32 tegra_sor_readl(struct tegra_dc_sor_data *sor, u32 reg) +{ + return readl((u32 *)sor->base + reg); +} + +static inline void tegra_sor_writel(struct tegra_dc_sor_data *sor, u32 reg, + u32 val) +{ + writel(val, (u32 *)sor->base + reg); +} + +static inline void tegra_sor_write_field(struct tegra_dc_sor_data *sor, + u32 reg, u32 mask, u32 val) +{ + u32 reg_val = tegra_sor_readl(sor, reg); + reg_val &= ~mask; + reg_val |= val; + tegra_sor_writel(sor, reg, reg_val); +} + +static int tegra_dc_sor_poll_register(struct tegra_dc_sor_data *sor, u32 reg, + u32 mask, u32 exp_val, + int poll_interval_us, int timeout_ms) +{ + u32 reg_val = 0; + ulong start; + + start = get_timer(0); + do { + reg_val = tegra_sor_readl(sor, reg); + if (((reg_val & mask) == exp_val)) + return 0; + udelay(poll_interval_us); + } while (get_timer(start) < timeout_ms); + + debug("sor_poll_register 0x%x: timeout, (reg_val)0x%08x & (mask)0x%08x != (exp_val)0x%08x\n", + reg, reg_val, mask, exp_val); + + return -ETIMEDOUT; +} + +int tegra_dc_sor_set_power_state(struct tegra_dc_sor_data *sor, int pu_pd) +{ + u32 reg_val; + u32 orig_val; + + orig_val = tegra_sor_readl(sor, PWR); + + reg_val = pu_pd ? PWR_NORMAL_STATE_PU : + PWR_NORMAL_STATE_PD; /* normal state only */ + + if (reg_val == orig_val) + return 0; /* No update needed */ + + reg_val |= PWR_SETTING_NEW_TRIGGER; + tegra_sor_writel(sor, PWR, reg_val); + + /* Poll to confirm it is done */ + if (tegra_dc_sor_poll_register(sor, PWR, + PWR_SETTING_NEW_DEFAULT_MASK, + PWR_SETTING_NEW_DONE, + 100, TEGRA_SOR_TIMEOUT_MS)) { + debug("dc timeout waiting for SOR_PWR = NEW_DONE\n"); + return -EFAULT; + } + + return 0; +} + +void tegra_dc_sor_set_dp_linkctl(struct tegra_dc_sor_data *sor, int ena, + u8 training_pattern, + const struct tegra_dp_link_config *link_cfg) +{ + u32 reg_val; + + reg_val = tegra_sor_readl(sor, DP_LINKCTL(sor->portnum)); + + if (ena) + reg_val |= DP_LINKCTL_ENABLE_YES; + else + reg_val &= DP_LINKCTL_ENABLE_NO; + + reg_val &= ~DP_LINKCTL_TUSIZE_MASK; + reg_val |= (link_cfg->tu_size << DP_LINKCTL_TUSIZE_SHIFT); + + if (link_cfg->enhanced_framing) + reg_val |= DP_LINKCTL_ENHANCEDFRAME_ENABLE; + + tegra_sor_writel(sor, DP_LINKCTL(sor->portnum), reg_val); + + switch (training_pattern) { + case training_pattern_1: + tegra_sor_writel(sor, DP_TPG, 0x41414141); + break; + case training_pattern_2: + case training_pattern_3: + reg_val = (link_cfg->link_bw == SOR_LINK_SPEED_G5_4) ? + 0x43434343 : 0x42424242; + tegra_sor_writel(sor, DP_TPG, reg_val); + break; + default: + tegra_sor_writel(sor, DP_TPG, 0x50505050); + break; + } +} + +static int tegra_dc_sor_enable_lane_sequencer(struct tegra_dc_sor_data *sor, + int pu, int is_lvds) +{ + u32 reg_val; + + /* SOR lane sequencer */ + if (pu) { + reg_val = LANE_SEQ_CTL_SETTING_NEW_TRIGGER | + LANE_SEQ_CTL_SEQUENCE_DOWN | + LANE_SEQ_CTL_NEW_POWER_STATE_PU; + } else { + reg_val = LANE_SEQ_CTL_SETTING_NEW_TRIGGER | + LANE_SEQ_CTL_SEQUENCE_UP | + LANE_SEQ_CTL_NEW_POWER_STATE_PD; + } + + if (is_lvds) + reg_val |= 15 << LANE_SEQ_CTL_DELAY_SHIFT; + else + reg_val |= 1 << LANE_SEQ_CTL_DELAY_SHIFT; + + tegra_sor_writel(sor, LANE_SEQ_CTL, reg_val); + + if (tegra_dc_sor_poll_register(sor, LANE_SEQ_CTL, + LANE_SEQ_CTL_SETTING_MASK, + LANE_SEQ_CTL_SETTING_NEW_DONE, + 100, TEGRA_SOR_TIMEOUT_MS)) { + debug("dp: timeout while waiting for SOR lane sequencer to power down lanes\n"); + return -1; + } + + return 0; +} + +static int tegra_dc_sor_power_dplanes(struct tegra_dc_sor_data *sor, + u32 lane_count, int pu) +{ + u32 reg_val; + + reg_val = tegra_sor_readl(sor, DP_PADCTL(sor->portnum)); + + if (pu) { + switch (lane_count) { + case 4: + reg_val |= (DP_PADCTL_PD_TXD_3_NO | + DP_PADCTL_PD_TXD_2_NO); + /* fall through */ + case 2: + reg_val |= DP_PADCTL_PD_TXD_1_NO; + case 1: + reg_val |= DP_PADCTL_PD_TXD_0_NO; + break; + default: + debug("dp: invalid lane number %d\n", lane_count); + return -1; + } + + tegra_sor_writel(sor, DP_PADCTL(sor->portnum), reg_val); + tegra_dc_sor_set_lane_count(sor, lane_count); + } + + return tegra_dc_sor_enable_lane_sequencer(sor, pu, 0); +} + +void tegra_dc_sor_set_panel_power(struct tegra_dc_sor_data *sor, + int power_up) +{ + u32 reg_val; + + reg_val = tegra_sor_readl(sor, DP_PADCTL(sor->portnum)); + + if (power_up) + reg_val |= DP_PADCTL_PAD_CAL_PD_POWERUP; + else + reg_val &= ~DP_PADCTL_PAD_CAL_PD_POWERUP; + + tegra_sor_writel(sor, DP_PADCTL(sor->portnum), reg_val); +} + +static void tegra_dc_sor_config_pwm(struct tegra_dc_sor_data *sor, u32 pwm_div, + u32 pwm_dutycycle) +{ + tegra_sor_writel(sor, PWM_DIV, pwm_div); + tegra_sor_writel(sor, PWM_CTL, + (pwm_dutycycle & PWM_CTL_DUTY_CYCLE_MASK) | + PWM_CTL_SETTING_NEW_TRIGGER); + + if (tegra_dc_sor_poll_register(sor, PWM_CTL, + PWM_CTL_SETTING_NEW_SHIFT, + PWM_CTL_SETTING_NEW_DONE, + 100, TEGRA_SOR_TIMEOUT_MS)) { + debug("dp: timeout while waiting for SOR PWM setting\n"); + } +} + +static void tegra_dc_sor_set_dp_mode(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg) +{ + u32 reg_val; + + tegra_dc_sor_set_link_bandwidth(sor, link_cfg->link_bw); + + tegra_dc_sor_set_dp_linkctl(sor, 1, training_pattern_none, link_cfg); + reg_val = tegra_sor_readl(sor, DP_CONFIG(sor->portnum)); + reg_val &= ~DP_CONFIG_WATERMARK_MASK; + reg_val |= link_cfg->watermark; + reg_val &= ~DP_CONFIG_ACTIVESYM_COUNT_MASK; + reg_val |= (link_cfg->active_count << + DP_CONFIG_ACTIVESYM_COUNT_SHIFT); + reg_val &= ~DP_CONFIG_ACTIVESYM_FRAC_MASK; + reg_val |= (link_cfg->active_frac << + DP_CONFIG_ACTIVESYM_FRAC_SHIFT); + if (link_cfg->activepolarity) + reg_val |= DP_CONFIG_ACTIVESYM_POLARITY_POSITIVE; + else + reg_val &= ~DP_CONFIG_ACTIVESYM_POLARITY_POSITIVE; + reg_val |= (DP_CONFIG_ACTIVESYM_CNTL_ENABLE | + DP_CONFIG_RD_RESET_VAL_NEGATIVE); + + tegra_sor_writel(sor, DP_CONFIG(sor->portnum), reg_val); + + /* program h/vblank sym */ + tegra_sor_write_field(sor, DP_AUDIO_HBLANK_SYMBOLS, + DP_AUDIO_HBLANK_SYMBOLS_MASK, + link_cfg->hblank_sym); + + tegra_sor_write_field(sor, DP_AUDIO_VBLANK_SYMBOLS, + DP_AUDIO_VBLANK_SYMBOLS_MASK, + link_cfg->vblank_sym); +} + +static inline void tegra_dc_sor_super_update(struct tegra_dc_sor_data *sor) +{ + tegra_sor_writel(sor, SUPER_STATE0, 0); + tegra_sor_writel(sor, SUPER_STATE0, 1); + tegra_sor_writel(sor, SUPER_STATE0, 0); +} + +static inline void tegra_dc_sor_update(struct tegra_dc_sor_data *sor) +{ + tegra_sor_writel(sor, STATE0, 0); + tegra_sor_writel(sor, STATE0, 1); + tegra_sor_writel(sor, STATE0, 0); +} + +static int tegra_dc_sor_io_set_dpd(struct tegra_dc_sor_data *sor, int up) +{ + u32 reg_val; + void *pmc_base = sor->pmc_base; + + if (up) { + writel(APBDEV_PMC_DPD_SAMPLE_ON_ENABLE, + pmc_base + APBDEV_PMC_DPD_SAMPLE); + writel(10, pmc_base + APBDEV_PMC_SEL_DPD_TIM); + } + + reg_val = readl(pmc_base + APBDEV_PMC_IO_DPD2_REQ); + reg_val &= ~(APBDEV_PMC_IO_DPD2_REQ_LVDS_ON || + APBDEV_PMC_IO_DPD2_REQ_CODE_DEFAULT_MASK); + + reg_val = up ? APBDEV_PMC_IO_DPD2_REQ_LVDS_ON | + APBDEV_PMC_IO_DPD2_REQ_CODE_DPD_OFF : + APBDEV_PMC_IO_DPD2_REQ_LVDS_OFF | + APBDEV_PMC_IO_DPD2_REQ_CODE_DPD_ON; + + writel(reg_val, pmc_base + APBDEV_PMC_IO_DPD2_REQ); + + /* Polling */ + u32 temp = 10 * 1000; + do { + udelay(20); + reg_val = readl(pmc_base + APBDEV_PMC_IO_DPD2_STATUS); + if (temp > 20) + temp -= 20; + else + break; + } while ((reg_val & APBDEV_PMC_IO_DPD2_STATUS_LVDS_ON) != 0); + + if ((reg_val & APBDEV_PMC_IO_DPD2_STATUS_LVDS_ON) != 0) { + debug("PMC_IO_DPD2 polling failed (0x%x)\n", reg_val); + return -EIO; + } + + if (up) { + writel(APBDEV_PMC_DPD_SAMPLE_ON_DISABLE, + pmc_base + APBDEV_PMC_DPD_SAMPLE); + } + + return 0; +} + +void tegra_dc_sor_set_internal_panel(struct tegra_dc_sor_data *sor, int is_int) +{ + u32 reg_val; + + reg_val = tegra_sor_readl(sor, DP_SPARE(sor->portnum)); + if (is_int) + reg_val |= DP_SPARE_PANEL_INTERNAL; + else + reg_val &= ~DP_SPARE_PANEL_INTERNAL; + + reg_val |= DP_SPARE_SOR_CLK_SEL_MACRO_SORCLK | + DP_SPARE_SEQ_ENABLE_YES; + tegra_sor_writel(sor, DP_SPARE(sor->portnum), reg_val); +} + +void tegra_dc_sor_read_link_config(struct tegra_dc_sor_data *sor, u8 *link_bw, + u8 *lane_count) +{ + u32 reg_val; + + reg_val = tegra_sor_readl(sor, CLK_CNTRL); + *link_bw = (reg_val & CLK_CNTRL_DP_LINK_SPEED_MASK) + >> CLK_CNTRL_DP_LINK_SPEED_SHIFT; + reg_val = tegra_sor_readl(sor, + DP_LINKCTL(sor->portnum)); + + switch (reg_val & DP_LINKCTL_LANECOUNT_MASK) { + case DP_LINKCTL_LANECOUNT_ZERO: + *lane_count = 0; + break; + case DP_LINKCTL_LANECOUNT_ONE: + *lane_count = 1; + break; + case DP_LINKCTL_LANECOUNT_TWO: + *lane_count = 2; + break; + case DP_LINKCTL_LANECOUNT_FOUR: + *lane_count = 4; + break; + default: + printf("Unknown lane count\n"); + } +} + +void tegra_dc_sor_set_link_bandwidth(struct tegra_dc_sor_data *sor, u8 link_bw) +{ + tegra_sor_write_field(sor, CLK_CNTRL, + CLK_CNTRL_DP_LINK_SPEED_MASK, + link_bw << CLK_CNTRL_DP_LINK_SPEED_SHIFT); +} + +void tegra_dc_sor_set_lane_count(struct tegra_dc_sor_data *sor, u8 lane_count) +{ + u32 reg_val; + + reg_val = tegra_sor_readl(sor, DP_LINKCTL(sor->portnum)); + reg_val &= ~DP_LINKCTL_LANECOUNT_MASK; + switch (lane_count) { + case 0: + break; + case 1: + reg_val |= DP_LINKCTL_LANECOUNT_ONE; + break; + case 2: + reg_val |= DP_LINKCTL_LANECOUNT_TWO; + break; + case 4: + reg_val |= DP_LINKCTL_LANECOUNT_FOUR; + break; + default: + /* 0 should be handled earlier. */ + printf("dp: Invalid lane count %d\n", lane_count); + return; + } + tegra_sor_writel(sor, DP_LINKCTL(sor->portnum), reg_val); +} + +/* + * The SOR power sequencer does not work for t124 so SW has to + * go through the power sequence manually + * Power up steps from spec: + * STEP PDPORT PDPLL PDBG PLLVCOD PLLCAPD E_DPD PDCAL + * 1 1 1 1 1 1 1 1 + * 2 1 1 1 1 1 0 1 + * 3 1 1 0 1 1 0 1 + * 4 1 0 0 0 0 0 1 + * 5 0 0 0 0 0 0 1 + */ +static int tegra_dc_sor_power_up(struct tegra_dc_sor_data *sor, int is_lvds) +{ + int ret; + + if (sor->power_is_up) + return 0; + + /* Set link bw */ + tegra_dc_sor_set_link_bandwidth(sor, is_lvds ? + CLK_CNTRL_DP_LINK_SPEED_LVDS : + CLK_CNTRL_DP_LINK_SPEED_G1_62); + + /* step 1 */ + tegra_sor_write_field(sor, PLL2, + PLL2_AUX7_PORT_POWERDOWN_MASK | /* PDPORT */ + PLL2_AUX6_BANDGAP_POWERDOWN_MASK | /* PDBG */ + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_MASK, /* PLLCAPD */ + PLL2_AUX7_PORT_POWERDOWN_ENABLE | + PLL2_AUX6_BANDGAP_POWERDOWN_ENABLE | + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_ENABLE); + tegra_sor_write_field(sor, PLL0, PLL0_PWR_MASK | /* PDPLL */ + PLL0_VCOPD_MASK, /* PLLVCOPD */ + PLL0_PWR_OFF | PLL0_VCOPD_ASSERT); + tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), + DP_PADCTL_PAD_CAL_PD_POWERDOWN, /* PDCAL */ + DP_PADCTL_PAD_CAL_PD_POWERDOWN); + + /* step 2 */ + ret = tegra_dc_sor_io_set_dpd(sor, 1); + if (ret) + return ret; + udelay(15); + + /* step 3 */ + tegra_sor_write_field(sor, PLL2, + PLL2_AUX6_BANDGAP_POWERDOWN_MASK, + PLL2_AUX6_BANDGAP_POWERDOWN_DISABLE); + udelay(25); + + /* step 4 */ + tegra_sor_write_field(sor, PLL0, + PLL0_PWR_MASK | /* PDPLL */ + PLL0_VCOPD_MASK, /* PLLVCOPD */ + PLL0_PWR_ON | PLL0_VCOPD_RESCIND); + /* PLLCAPD */ + tegra_sor_write_field(sor, PLL2, + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_MASK, + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_DISABLE); + udelay(225); + + /* step 5 PDPORT */ + tegra_sor_write_field(sor, PLL2, + PLL2_AUX7_PORT_POWERDOWN_MASK, + PLL2_AUX7_PORT_POWERDOWN_DISABLE); + + sor->power_is_up = 1; + + return 0; +} + +#if DEBUG_SOR +static void dump_sor_reg(struct tegra_dc_sor_data *sor) +{ +#define DUMP_REG(a) printk(BIOS_INFO, "%-32s %03x %08x\n", \ + #a, a, tegra_sor_readl(sor, a)); + + DUMP_REG(SUPER_STATE0); + DUMP_REG(SUPER_STATE1); + DUMP_REG(STATE0); + DUMP_REG(STATE1); + DUMP_REG(NV_HEAD_STATE0(0)); + DUMP_REG(NV_HEAD_STATE0(1)); + DUMP_REG(NV_HEAD_STATE1(0)); + DUMP_REG(NV_HEAD_STATE1(1)); + DUMP_REG(NV_HEAD_STATE2(0)); + DUMP_REG(NV_HEAD_STATE2(1)); + DUMP_REG(NV_HEAD_STATE3(0)); + DUMP_REG(NV_HEAD_STATE3(1)); + DUMP_REG(NV_HEAD_STATE4(0)); + DUMP_REG(NV_HEAD_STATE4(1)); + DUMP_REG(NV_HEAD_STATE5(0)); + DUMP_REG(NV_HEAD_STATE5(1)); + DUMP_REG(CRC_CNTRL); + DUMP_REG(CLK_CNTRL); + DUMP_REG(CAP); + DUMP_REG(PWR); + DUMP_REG(TEST); + DUMP_REG(PLL0); + DUMP_REG(PLL1); + DUMP_REG(PLL2); + DUMP_REG(PLL3); + DUMP_REG(CSTM); + DUMP_REG(LVDS); + DUMP_REG(CRCA); + DUMP_REG(CRCB); + DUMP_REG(SEQ_CTL); + DUMP_REG(LANE_SEQ_CTL); + DUMP_REG(SEQ_INST(0)); + DUMP_REG(SEQ_INST(1)); + DUMP_REG(SEQ_INST(2)); + DUMP_REG(SEQ_INST(3)); + DUMP_REG(SEQ_INST(4)); + DUMP_REG(SEQ_INST(5)); + DUMP_REG(SEQ_INST(6)); + DUMP_REG(SEQ_INST(7)); + DUMP_REG(SEQ_INST(8)); + DUMP_REG(PWM_DIV); + DUMP_REG(PWM_CTL); + DUMP_REG(MSCHECK); + DUMP_REG(XBAR_CTRL); + DUMP_REG(DP_LINKCTL(0)); + DUMP_REG(DP_LINKCTL(1)); + DUMP_REG(DC(0)); + DUMP_REG(DC(1)); + DUMP_REG(LANE_DRIVE_CURRENT(0)); + DUMP_REG(PR(0)); + DUMP_REG(LANE4_PREEMPHASIS(0)); + DUMP_REG(POSTCURSOR(0)); + DUMP_REG(DP_CONFIG(0)); + DUMP_REG(DP_CONFIG(1)); + DUMP_REG(DP_MN(0)); + DUMP_REG(DP_MN(1)); + DUMP_REG(DP_PADCTL(0)); + DUMP_REG(DP_PADCTL(1)); + DUMP_REG(DP_DEBUG(0)); + DUMP_REG(DP_DEBUG(1)); + DUMP_REG(DP_SPARE(0)); + DUMP_REG(DP_SPARE(1)); + DUMP_REG(DP_TPG); + + return; +} +#endif + +static void tegra_dc_sor_config_panel(struct tegra_dc_sor_data *sor, + int is_lvds, + const struct tegra_dp_link_config *link_cfg, + const struct display_timing *timing) +{ + const int head_num = 0; + u32 reg_val = STATE1_ASY_OWNER_HEAD0 << head_num; + u32 vtotal, htotal; + u32 vsync_end, hsync_end; + u32 vblank_end, hblank_end; + u32 vblank_start, hblank_start; + + reg_val |= is_lvds ? STATE1_ASY_PROTOCOL_LVDS_CUSTOM : + STATE1_ASY_PROTOCOL_DP_A; + reg_val |= STATE1_ASY_SUBOWNER_NONE | + STATE1_ASY_CRCMODE_COMPLETE_RASTER; + + reg_val |= STATE1_ASY_HSYNCPOL_NEGATIVE_TRUE; + reg_val |= STATE1_ASY_VSYNCPOL_NEGATIVE_TRUE; + reg_val |= (link_cfg->bits_per_pixel > 18) ? + STATE1_ASY_PIXELDEPTH_BPP_24_444 : + STATE1_ASY_PIXELDEPTH_BPP_18_444; + + tegra_sor_writel(sor, STATE1, reg_val); + + /* + * Skipping programming NV_HEAD_STATE0, assuming: + * interlacing: PROGRESSIVE, dynamic range: VESA, colorspace: RGB + */ + vtotal = timing->vsync_len.typ + timing->vback_porch.typ + + timing->vactive.typ + timing->vfront_porch.typ; + htotal = timing->hsync_len.typ + timing->hback_porch.typ + + timing->hactive.typ + timing->hfront_porch.typ; + + tegra_sor_writel(sor, NV_HEAD_STATE1(head_num), + vtotal << NV_HEAD_STATE1_VTOTAL_SHIFT | + htotal << NV_HEAD_STATE1_HTOTAL_SHIFT); + + vsync_end = timing->vsync_len.typ - 1; + hsync_end = timing->hsync_len.typ - 1; + tegra_sor_writel(sor, NV_HEAD_STATE2(head_num), + vsync_end << NV_HEAD_STATE2_VSYNC_END_SHIFT | + hsync_end << NV_HEAD_STATE2_HSYNC_END_SHIFT); + + vblank_end = vsync_end + timing->vback_porch.typ; + hblank_end = hsync_end + timing->hback_porch.typ; + tegra_sor_writel(sor, NV_HEAD_STATE3(head_num), + vblank_end << NV_HEAD_STATE3_VBLANK_END_SHIFT | + hblank_end << NV_HEAD_STATE3_HBLANK_END_SHIFT); + + vblank_start = vblank_end + timing->vactive.typ; + hblank_start = hblank_end + timing->hactive.typ; + tegra_sor_writel(sor, NV_HEAD_STATE4(head_num), + vblank_start << NV_HEAD_STATE4_VBLANK_START_SHIFT | + hblank_start << NV_HEAD_STATE4_HBLANK_START_SHIFT); + + /* TODO: adding interlace mode support */ + tegra_sor_writel(sor, NV_HEAD_STATE5(head_num), 0x1); + + tegra_sor_write_field(sor, CSTM, + CSTM_ROTCLK_DEFAULT_MASK | + CSTM_LVDS_EN_ENABLE, + 2 << CSTM_ROTCLK_SHIFT | + is_lvds ? CSTM_LVDS_EN_ENABLE : + CSTM_LVDS_EN_DISABLE); + + tegra_dc_sor_config_pwm(sor, 1024, 1024); +} + +static void tegra_dc_sor_enable_dc(struct dc_ctlr *disp_ctrl) +{ + u32 reg_val = readl(&disp_ctrl->cmd.state_access); + + writel(reg_val | WRITE_MUX_ACTIVE, &disp_ctrl->cmd.state_access); + writel(VSYNC_H_POSITION(1), &disp_ctrl->disp.disp_timing_opt); + + /* Enable DC now - otherwise pure text console may not show. */ + writel(CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT, + &disp_ctrl->cmd.disp_cmd); + writel(reg_val, &disp_ctrl->cmd.state_access); +} + +int tegra_dc_sor_enable_dp(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg) +{ + int ret; + + tegra_sor_write_field(sor, CLK_CNTRL, + CLK_CNTRL_DP_CLK_SEL_MASK, + CLK_CNTRL_DP_CLK_SEL_SINGLE_DPCLK); + + tegra_sor_write_field(sor, PLL2, + PLL2_AUX6_BANDGAP_POWERDOWN_MASK, + PLL2_AUX6_BANDGAP_POWERDOWN_DISABLE); + udelay(25); + + tegra_sor_write_field(sor, PLL3, + PLL3_PLLVDD_MODE_MASK, + PLL3_PLLVDD_MODE_V3_3); + tegra_sor_writel(sor, PLL0, + 0xf << PLL0_ICHPMP_SHFIT | + 0x3 << PLL0_VCOCAP_SHIFT | + PLL0_PLLREG_LEVEL_V45 | + PLL0_RESISTORSEL_EXT | + PLL0_PWR_ON | PLL0_VCOPD_RESCIND); + tegra_sor_write_field(sor, PLL2, + PLL2_AUX1_SEQ_MASK | + PLL2_AUX9_LVDSEN_OVERRIDE | + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_MASK, + PLL2_AUX1_SEQ_PLLCAPPD_OVERRIDE | + PLL2_AUX9_LVDSEN_OVERRIDE | + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_DISABLE); + tegra_sor_writel(sor, PLL1, PLL1_TERM_COMPOUT_HIGH | + PLL1_TMDS_TERM_ENABLE); + + if (tegra_dc_sor_poll_register(sor, PLL2, + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_MASK, + PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_DISABLE, + 100, TEGRA_SOR_TIMEOUT_MS)) { + printf("DP failed to lock PLL\n"); + return -EIO; + } + + tegra_sor_write_field(sor, PLL2, PLL2_AUX2_MASK | + PLL2_AUX7_PORT_POWERDOWN_MASK, + PLL2_AUX2_OVERRIDE_POWERDOWN | + PLL2_AUX7_PORT_POWERDOWN_DISABLE); + + ret = tegra_dc_sor_power_up(sor, 0); + if (ret) + return ret; + + /* re-enable SOR clock */ + clock_sor_enable_edp_clock(); + + /* Power up lanes */ + tegra_dc_sor_power_dplanes(sor, link_cfg->lane_count, 1); + + tegra_dc_sor_set_dp_mode(sor, link_cfg); + + return 0; +} + +int tegra_dc_sor_attach(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg, + const struct display_timing *timing) +{ + const void *blob = gd->fdt_blob; + struct dc_ctlr *disp_ctrl; + u32 reg_val; + int node; + + /* Use the first display controller */ + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_DC); + if (node < 0) + return -ENOENT; + disp_ctrl = (struct dc_ctlr *)fdtdec_get_addr(blob, node, "reg"); + + tegra_dc_sor_enable_dc(disp_ctrl); + tegra_dc_sor_config_panel(sor, 0, link_cfg, timing); + + writel(0x9f00, &disp_ctrl->cmd.state_ctrl); + writel(0x9f, &disp_ctrl->cmd.state_ctrl); + + writel(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE | + PW4_ENABLE | PM0_ENABLE | PM1_ENABLE, + &disp_ctrl->cmd.disp_pow_ctrl); + + reg_val = tegra_sor_readl(sor, TEST); + if (reg_val & TEST_ATTACHED_TRUE) + return -EEXIST; + + tegra_sor_writel(sor, SUPER_STATE1, + SUPER_STATE1_ATTACHED_NO); + + /* + * Enable display2sor clock at least 2 cycles before DC start, + * to clear sor internal valid signal. + */ + writel(SOR_ENABLE, &disp_ctrl->disp.disp_win_opt); + writel(GENERAL_ACT_REQ, &disp_ctrl->cmd.state_ctrl); + writel(0, &disp_ctrl->disp.disp_win_opt); + writel(GENERAL_ACT_REQ, &disp_ctrl->cmd.state_ctrl); + + /* Attach head */ + tegra_dc_sor_update(sor); + tegra_sor_writel(sor, SUPER_STATE1, + SUPER_STATE1_ATTACHED_YES); + tegra_sor_writel(sor, SUPER_STATE1, + SUPER_STATE1_ATTACHED_YES | + SUPER_STATE1_ASY_HEAD_OP_AWAKE | + SUPER_STATE1_ASY_ORMODE_NORMAL); + tegra_dc_sor_super_update(sor); + + /* Enable dc */ + reg_val = readl(&disp_ctrl->cmd.state_access); + writel(reg_val | WRITE_MUX_ACTIVE, &disp_ctrl->cmd.state_access); + writel(CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT, + &disp_ctrl->cmd.disp_cmd); + writel(SOR_ENABLE, &disp_ctrl->disp.disp_win_opt); + writel(reg_val, &disp_ctrl->cmd.state_access); + + if (tegra_dc_sor_poll_register(sor, TEST, + TEST_ACT_HEAD_OPMODE_DEFAULT_MASK, + TEST_ACT_HEAD_OPMODE_AWAKE, + 100, + TEGRA_SOR_ATTACH_TIMEOUT_MS)) { + printf("dc timeout waiting for OPMOD = AWAKE\n"); + return -ETIMEDOUT; + } else { + debug("%s: sor is attached\n", __func__); + } + +#if DEBUG_SOR + dump_sor_reg(sor); +#endif + + return 0; +} + +void tegra_dc_sor_set_lane_parm(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg) +{ + tegra_sor_writel(sor, LANE_DRIVE_CURRENT(sor->portnum), + link_cfg->drive_current); + tegra_sor_writel(sor, PR(sor->portnum), + link_cfg->preemphasis); + tegra_sor_writel(sor, POSTCURSOR(sor->portnum), + link_cfg->postcursor); + tegra_sor_writel(sor, LVDS, 0); + + tegra_dc_sor_set_link_bandwidth(sor, link_cfg->link_bw); + tegra_dc_sor_set_lane_count(sor, link_cfg->lane_count); + + tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), + DP_PADCTL_TX_PU_ENABLE | + DP_PADCTL_TX_PU_VALUE_DEFAULT_MASK, + DP_PADCTL_TX_PU_ENABLE | + 2 << DP_PADCTL_TX_PU_VALUE_SHIFT); + + /* Precharge */ + tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), 0xf0, 0xf0); + udelay(20); + + tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), 0xf0, 0x0); +} + +void tegra_dc_sor_power_down_unused_lanes(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg) +{ + u32 pad_ctrl = 0; + u32 drive_current = 0; + u32 pre_emphasis = 0; + int err = 0; + + switch (link_cfg->lane_count) { + case 4: + pad_ctrl = DP_PADCTL_PD_TXD_0_NO | + DP_PADCTL_PD_TXD_1_NO | + DP_PADCTL_PD_TXD_2_NO | + DP_PADCTL_PD_TXD_3_NO; + break; + case 2: + pad_ctrl = DP_PADCTL_PD_TXD_0_NO | + DP_PADCTL_PD_TXD_1_NO | + DP_PADCTL_PD_TXD_2_YES | + DP_PADCTL_PD_TXD_3_YES; + break; + case 1: + pad_ctrl = DP_PADCTL_PD_TXD_0_NO | + DP_PADCTL_PD_TXD_1_YES | + DP_PADCTL_PD_TXD_2_YES | + DP_PADCTL_PD_TXD_3_YES; + break; + default: + printf("Invalid sor lane count: %u\n", link_cfg->lane_count); + return; + } + + pad_ctrl |= DP_PADCTL_PAD_CAL_PD_POWERDOWN; + tegra_sor_writel(sor, DP_PADCTL(sor->portnum), pad_ctrl); + + err = tegra_dc_sor_enable_lane_sequencer(sor, 0, 0); + if (err) { + debug("Wait for lane power down failed: %d\n", err); + return; + } + + /* Set to a known-good pre-calibrated setting */ + switch (link_cfg->link_bw) { + case SOR_LINK_SPEED_G1_62: + case SOR_LINK_SPEED_G2_7: + drive_current = 0x13131313; + pre_emphasis = 0; + break; + case SOR_LINK_SPEED_G5_4: + drive_current = 0x19191919; + pre_emphasis = 0x09090909; + default: + printf("Invalid sor link bandwidth: %d\n", link_cfg->link_bw); + return; + } + + tegra_sor_writel(sor, LANE_DRIVE_CURRENT(sor->portnum), + drive_current); + tegra_sor_writel(sor, PR(sor->portnum), pre_emphasis); +} + +int tegra_dc_sor_init(struct tegra_dc_sor_data **sorp) +{ + const void *blob = gd->fdt_blob; + struct tegra_dc_sor_data *sor; + int node; + + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_SOR); + if (node < 0) + return -ENOENT; + sor = calloc(1, sizeof(*sor)); + if (!sor) + return -ENOMEM; + sor->base = (void *)fdtdec_get_addr(blob, node, "reg"); + + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_PMC); + if (node < 0) + return -ENOENT; + sor->pmc_base = (void *)fdtdec_get_addr(blob, node, "reg"); + + sor->power_is_up = 0; + sor->portnum = 0; + *sorp = sor; + + return 0; +} diff --git a/drivers/video/tegra124/sor.h b/drivers/video/tegra124/sor.h new file mode 100644 index 0000000..7f1255c --- /dev/null +++ b/drivers/video/tegra124/sor.h @@ -0,0 +1,904 @@ +/* + * Copyright (c) 2011-2013, NVIDIA Corporation. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _VIDEO_TEGRA124_SOR_H +#define _VIDEO_TEGRA124_SOR_H + +#define SUPER_STATE0 0x1 +#define SUPER_STATE0_UPDATE_SHIFT 0 +#define SUPER_STATE0_UPDATE_DEFAULT_MASK 0x1 +#define SUPER_STATE1 0x2 +#define SUPER_STATE1_ATTACHED_SHIFT 3 +#define SUPER_STATE1_ATTACHED_NO (0 << 3) +#define SUPER_STATE1_ATTACHED_YES (1 << 3) +#define SUPER_STATE1_ASY_ORMODE_SHIFT 2 +#define SUPER_STATE1_ASY_ORMODE_SAFE (0 << 2) +#define SUPER_STATE1_ASY_ORMODE_NORMAL (1 << 2) +#define SUPER_STATE1_ASY_HEAD_OP_SHIFT 0 +#define SUPER_STATE1_ASY_HEAD_OP_DEFAULT_MASK 0x3 +#define SUPER_STATE1_ASY_HEAD_OP_SLEEP 0 +#define SUPER_STATE1_ASY_HEAD_OP_SNOOZE 1 +#define SUPER_STATE1_ASY_HEAD_OP_AWAKE 2 +#define STATE0 0x3 +#define STATE0_UPDATE_SHIFT 0 +#define STATE0_UPDATE_DEFAULT_MASK 0x1 +#define STATE1 0x4 +#define STATE1_ASY_PIXELDEPTH_SHIFT 17 +#define STATE1_ASY_PIXELDEPTH_DEFAULT_MASK (0xf << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_16_422 (1 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_18_444 (2 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_20_422 (3 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_24_422 (4 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_24_444 (5 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_30_444 (6 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_32_422 (7 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_36_444 (8 << 17) +#define STATE1_ASY_PIXELDEPTH_BPP_48_444 (9 << 17) +#define STATE1_ASY_REPLICATE_SHIFT 15 +#define STATE1_ASY_REPLICATE_DEFAULT_MASK (3 << 15) +#define STATE1_ASY_REPLICATE_OFF (0 << 15) +#define STATE1_ASY_REPLICATE_X2 (1 << 15) +#define STATE1_ASY_REPLICATE_X4 (2 << 15) +#define STATE1_ASY_DEPOL_SHIFT 14 +#define STATE1_ASY_DEPOL_DEFAULT_MASK (1 << 14) +#define STATE1_ASY_DEPOL_POSITIVE_TRUE (0 << 14) +#define STATE1_ASY_DEPOL_NEGATIVE_TRUE (1 << 14) +#define STATE1_ASY_VSYNCPOL_SHIFT 13 +#define STATE1_ASY_VSYNCPOL_DEFAULT_MASK (1 << 13) +#define STATE1_ASY_VSYNCPOL_POSITIVE_TRUE (0 << 13) +#define STATE1_ASY_VSYNCPOL_NEGATIVE_TRUE (1 << 13) +#define STATE1_ASY_HSYNCPOL_SHIFT 12 +#define STATE1_ASY_HSYNCPOL_DEFAULT_MASK (1 << 12) +#define STATE1_ASY_HSYNCPOL_POSITIVE_TRUE (0 << 12) +#define STATE1_ASY_HSYNCPOL_NEGATIVE_TRUE (1 << 12) +#define STATE1_ASY_PROTOCOL_SHIFT 8 +#define STATE1_ASY_PROTOCOL_DEFAULT_MASK (0xf << 8) +#define STATE1_ASY_PROTOCOL_LVDS_CUSTOM (0 << 8) +#define STATE1_ASY_PROTOCOL_DP_A (8 << 8) +#define STATE1_ASY_PROTOCOL_DP_B (9 << 8) +#define STATE1_ASY_PROTOCOL_CUSTOM (15 << 8) +#define STATE1_ASY_CRCMODE_SHIFT 6 +#define STATE1_ASY_CRCMODE_DEFAULT_MASK (3 << 6) +#define STATE1_ASY_CRCMODE_ACTIVE_RASTER (0 << 6) +#define STATE1_ASY_CRCMODE_COMPLETE_RASTER (1 << 6) +#define STATE1_ASY_CRCMODE_NON_ACTIVE_RASTER (2 << 6) +#define STATE1_ASY_SUBOWNER_SHIFT 4 +#define STATE1_ASY_SUBOWNER_DEFAULT_MASK (3 << 4) +#define STATE1_ASY_SUBOWNER_NONE (0 << 4) +#define STATE1_ASY_SUBOWNER_SUBHEAD0 (1 << 4) +#define STATE1_ASY_SUBOWNER_SUBHEAD1 (2 << 4) +#define STATE1_ASY_SUBOWNER_BOTH (3 << 4) +#define STATE1_ASY_OWNER_SHIFT 0 +#define STATE1_ASY_OWNER_DEFAULT_MASK 0xf +#define STATE1_ASY_OWNER_NONE 0 +#define STATE1_ASY_OWNER_HEAD0 1 +#define STATE1_ASY_OWNER_HEAD1 2 +#define NV_HEAD_STATE0(i) 0x5 +#define NV_HEAD_STATE0_INTERLACED_SHIFT 4 +#define NV_HEAD_STATE0_INTERLACED_DEFAULT_MASK (3 << 4) +#define NV_HEAD_STATE0_INTERLACED_PROGRESSIVE (0 << 4) +#define NV_HEAD_STATE0_INTERLACED_INTERLACED (1 << 4) +#define NV_HEAD_STATE0_RANGECOMPRESS_SHIFT 3 +#define NV_HEAD_STATE0_RANGECOMPRESS_DEFAULT_MASK (1 << 3) +#define NV_HEAD_STATE0_RANGECOMPRESS_DISABLE (0 << 3) +#define NV_HEAD_STATE0_RANGECOMPRESS_ENABLE (1 << 3) +#define NV_HEAD_STATE0_DYNRANGE_SHIFT 2 +#define NV_HEAD_STATE0_DYNRANGE_DEFAULT_MASK (1 << 2) +#define NV_HEAD_STATE0_DYNRANGE_VESA (0 << 2) +#define NV_HEAD_STATE0_DYNRANGE_CEA (1 << 2) +#define NV_HEAD_STATE0_COLORSPACE_SHIFT 0 +#define NV_HEAD_STATE0_COLORSPACE_DEFAULT_MASK 0x3 +#define NV_HEAD_STATE0_COLORSPACE_RGB 0 +#define NV_HEAD_STATE0_COLORSPACE_YUV_601 1 +#define NV_HEAD_STATE0_COLORSPACE_YUV_709 2 +#define NV_HEAD_STATE1(i) (7 + i) +#define NV_HEAD_STATE1_VTOTAL_SHIFT 16 +#define NV_HEAD_STATE1_VTOTAL_DEFAULT_MASK (0x7fff << 16) +#define NV_HEAD_STATE1_HTOTAL_SHIFT 0 +#define NV_HEAD_STATE1_HTOTAL_DEFAULT_MASK 0x7fff +#define NV_HEAD_STATE2(i) (9 + i) +#define NV_HEAD_STATE2_VSYNC_END_SHIFT 16 +#define NV_HEAD_STATE2_VSYNC_END_DEFAULT_MASK (0x7fff << 16) +#define NV_HEAD_STATE2_HSYNC_END_SHIFT 0 +#define NV_HEAD_STATE2_HSYNC_END_DEFAULT_MASK 0x7fff +#define NV_HEAD_STATE3(i) (0xb + i) +#define NV_HEAD_STATE3_VBLANK_END_SHIFT 16 +#define NV_HEAD_STATE3_VBLANK_END_DEFAULT_MASK (0x7fff << 16) +#define NV_HEAD_STATE3_HBLANK_END_SHIFT 0 +#define NV_HEAD_STATE3_HBLANK_END_DEFAULT_MASK 0x7fff +#define NV_HEAD_STATE4(i) (0xd + i) +#define NV_HEAD_STATE4_VBLANK_START_SHIFT 16 +#define NV_HEAD_STATE4_VBLANK_START_DEFAULT_MASK (0x7fff << 16) +#define NV_HEAD_STATE4_HBLANK_START_SHIFT 0 +#define NV_HEAD_STATE4_HBLANK_START_DEFAULT_MASK 0x7fff +#define NV_HEAD_STATE5(i) (0xf + i) +#define CRC_CNTRL 0x11 +#define CRC_CNTRL_ARM_CRC_ENABLE_SHIFT 0 +#define CRC_CNTRL_ARM_CRC_ENABLE_NO 0 +#define CRC_CNTRL_ARM_CRC_ENABLE_YES 1 +#define CRC_CNTRL_ARM_CRC_ENABLE_DIS 0 +#define CRC_CNTRL_ARM_CRC_ENABLE_EN 1 +#define CLK_CNTRL 0x13 +#define CLK_CNTRL_DP_CLK_SEL_SHIFT 0 +#define CLK_CNTRL_DP_CLK_SEL_MASK 0x3 +#define CLK_CNTRL_DP_CLK_SEL_SINGLE_PCLK 0 +#define CLK_CNTRL_DP_CLK_SEL_DIFF_PCLK 1 +#define CLK_CNTRL_DP_CLK_SEL_SINGLE_DPCLK 2 +#define CLK_CNTRL_DP_CLK_SEL_DIFF_DPCLK 3 +#define CLK_CNTRL_DP_LINK_SPEED_SHIFT 2 +#define CLK_CNTRL_DP_LINK_SPEED_MASK (0x1f << 2) +#define CLK_CNTRL_DP_LINK_SPEED_G1_62 (6 << 2) +#define CLK_CNTRL_DP_LINK_SPEED_G2_7 (10 << 2) +#define CLK_CNTRL_DP_LINK_SPEED_LVDS (7 << 2) +#define CAP 0x14 +#define CAP_DP_A_SHIFT 24 +#define CAP_DP_A_DEFAULT_MASK (1 << 24) +#define CAP_DP_A_FALSE (0 << 24) +#define CAP_DP_A_TRUE (1 << 24) +#define CAP_DP_B_SHIFT 25 +#define CAP_DP_B_DEFAULT_MASK (1 << 24) +#define CAP_DP_B_FALSE (0 << 24) +#define CAP_DP_B_TRUE (1 << 24) +#define PWR 0x15 +#define PWR_SETTING_NEW_SHIFT 31 +#define PWR_SETTING_NEW_DEFAULT_MASK (1 << 31) +#define PWR_SETTING_NEW_DONE (0 << 31) +#define PWR_SETTING_NEW_PENDING (1 << 31) +#define PWR_SETTING_NEW_TRIGGER (1 << 31) +#define PWR_MODE_SHIFT 28 +#define PWR_MODE_DEFAULT_MASK (1 << 28) +#define PWR_MODE_NORMAL (0 << 28) +#define PWR_MODE_SAFE (1 << 28) +#define PWR_HALT_DELAY_SHIFT 24 +#define PWR_HALT_DELAY_DEFAULT_MASK (1 << 24) +#define PWR_HALT_DELAY_DONE (0 << 24) +#define PWR_HALT_DELAY_ACTIVE (1 << 24) +#define PWR_SAFE_START_SHIFT 17 +#define PWR_SAFE_START_DEFAULT_MASK (1 << 17) +#define PWR_SAFE_START_NORMAL (0 << 17) +#define PWR_SAFE_START_ALT (1 << 17) +#define PWR_SAFE_STATE_SHIFT 16 +#define PWR_SAFE_STATE_DEFAULT_MASK (1 << 16) +#define PWR_SAFE_STATE_PD (0 << 16) +#define PWR_SAFE_STATE_PU (1 << 16) +#define PWR_NORMAL_START_SHIFT 1 +#define PWR_NORMAL_START_DEFAULT_MASK (1 << 1) +#define PWR_NORMAL_START_NORMAL (0 << 16) +#define PWR_NORMAL_START_ALT (1 << 16) +#define PWR_NORMAL_STATE_SHIFT 0 +#define PWR_NORMAL_STATE_DEFAULT_MASK 0x1 +#define PWR_NORMAL_STATE_PD 0 +#define PWR_NORMAL_STATE_PU 1 +#define TEST 0x16 +#define TEST_TESTMUX_SHIFT 24 +#define TEST_TESTMUX_DEFAULT_MASK (0xff << 24) +#define TEST_TESTMUX_AVSS (0 << 24) +#define TEST_TESTMUX_CLOCKIN (2 << 24) +#define TEST_TESTMUX_PLL_VOL (4 << 24) +#define TEST_TESTMUX_SLOWCLKINT (8 << 24) +#define TEST_TESTMUX_AVDD (16 << 24) +#define TEST_TESTMUX_VDDREG (32 << 24) +#define TEST_TESTMUX_REGREF_VDDREG (64 << 24) +#define TEST_TESTMUX_REGREF_AVDD (128 << 24) +#define TEST_CRC_SHIFT 23 +#define TEST_CRC_PRE_SERIALIZE (0 << 23) +#define TEST_CRC_POST_DESERIALIZE (1 << 23) +#define TEST_TPAT_SHIFT 20 +#define TEST_TPAT_DEFAULT_MASK (7 << 20) +#define TEST_TPAT_LO (0 << 20) +#define TEST_TPAT_TDAT (1 << 20) +#define TEST_TPAT_RAMP (2 << 20) +#define TEST_TPAT_WALK (3 << 20) +#define TEST_TPAT_MAXSTEP (4 << 20) +#define TEST_TPAT_MINSTEP (5 << 20) +#define TEST_DSRC_SHIFT 16 +#define TEST_DSRC_DEFAULT_MASK (3 << 16) +#define TEST_DSRC_NORMAL (0 << 16) +#define TEST_DSRC_DEBUG (1 << 16) +#define TEST_DSRC_TGEN (2 << 16) +#define TEST_HEAD_NUMBER_SHIFT 12 +#define TEST_HEAD_NUMBER_DEFAULT_MASK (3 << 12) +#define TEST_HEAD_NUMBER_NONE (0 << 12) +#define TEST_HEAD_NUMBER_HEAD0 (1 << 12) +#define TEST_HEAD_NUMBER_HEAD1 (2 << 12) +#define TEST_ATTACHED_SHIFT 10 +#define TEST_ATTACHED_DEFAULT_MASK (1 << 10) +#define TEST_ATTACHED_FALSE (0 << 10) +#define TEST_ATTACHED_TRUE (1 << 10) +#define TEST_ACT_HEAD_OPMODE_SHIFT 8 +#define TEST_ACT_HEAD_OPMODE_DEFAULT_MASK (3 << 8) +#define TEST_ACT_HEAD_OPMODE_SLEEP (0 << 8) +#define TEST_ACT_HEAD_OPMODE_SNOOZE (1 << 8) +#define TEST_ACT_HEAD_OPMODE_AWAKE (2 << 8) +#define TEST_INVD_SHIFT 6 +#define TEST_INVD_DISABLE (0 << 6) +#define TEST_INVD_ENABLE (1 << 6) +#define TEST_TEST_ENABLE_SHIFT 1 +#define TEST_TEST_ENABLE_DISABLE (0 << 1) +#define TEST_TEST_ENABLE_ENABLE (1 << 1) +#define PLL0 0x17 +#define PLL0_ICHPMP_SHFIT 24 +#define PLL0_ICHPMP_DEFAULT_MASK (0xf << 24) +#define PLL0_VCOCAP_SHIFT 8 +#define PLL0_VCOCAP_DEFAULT_MASK (0xf << 8) +#define PLL0_PLLREG_LEVEL_SHIFT 6 +#define PLL0_PLLREG_LEVEL_DEFAULT_MASK (3 << 6) +#define PLL0_PLLREG_LEVEL_V25 (0 << 6) +#define PLL0_PLLREG_LEVEL_V15 (1 << 6) +#define PLL0_PLLREG_LEVEL_V35 (2 << 6) +#define PLL0_PLLREG_LEVEL_V45 (3 << 6) +#define PLL0_PULLDOWN_SHIFT 5 +#define PLL0_PULLDOWN_DEFAULT_MASK (1 << 5) +#define PLL0_PULLDOWN_DISABLE (0 << 5) +#define PLL0_PULLDOWN_ENABLE (1 << 5) +#define PLL0_RESISTORSEL_SHIFT 4 +#define PLL0_RESISTORSEL_DEFAULT_MASK (1 << 4) +#define PLL0_RESISTORSEL_INT (0 << 4) +#define PLL0_RESISTORSEL_EXT (1 << 4) +#define PLL0_VCOPD_SHIFT 2 +#define PLL0_VCOPD_MASK (1 << 2) +#define PLL0_VCOPD_RESCIND (0 << 2) +#define PLL0_VCOPD_ASSERT (1 << 2) +#define PLL0_PWR_SHIFT 0 +#define PLL0_PWR_MASK 1 +#define PLL0_PWR_ON 0 +#define PLL0_PWR_OFF 1 +#define PLL1_TMDS_TERM_SHIFT 8 +#define PLL1_TMDS_TERM_DISABLE (0 << 8) +#define PLL1_TMDS_TERM_ENABLE (1 << 8) +#define PLL1 0x18 +#define PLL1_TERM_COMPOUT_SHIFT 15 +#define PLL1_TERM_COMPOUT_LOW (0 << 15) +#define PLL1_TERM_COMPOUT_HIGH (1 << 15) +#define PLL2 0x19 +#define PLL2_DCIR_PLL_RESET_SHIFT 0 +#define PLL2_DCIR_PLL_RESET_OVERRIDE (0 << 0) +#define PLL2_DCIR_PLL_RESET_ALLOW (1 << 0) +#define PLL2_AUX1_SHIFT 17 +#define PLL2_AUX1_SEQ_MASK (1 << 17) +#define PLL2_AUX1_SEQ_PLLCAPPD_ALLOW (0 << 17) +#define PLL2_AUX1_SEQ_PLLCAPPD_OVERRIDE (1 << 17) +#define PLL2_AUX2_SHIFT 18 +#define PLL2_AUX2_MASK (1 << 18) +#define PLL2_AUX2_OVERRIDE_POWERDOWN (0 << 18) +#define PLL2_AUX2_ALLOW_POWERDOWN (1 << 18) +#define PLL2_AUX6_SHIFT 22 +#define PLL2_AUX6_BANDGAP_POWERDOWN_MASK (1 << 22) +#define PLL2_AUX6_BANDGAP_POWERDOWN_DISABLE (0 << 22) +#define PLL2_AUX6_BANDGAP_POWERDOWN_ENABLE (1 << 22) +#define PLL2_AUX7_SHIFT 23 +#define PLL2_AUX7_PORT_POWERDOWN_MASK (1 << 23) +#define PLL2_AUX7_PORT_POWERDOWN_DISABLE (0 << 23) +#define PLL2_AUX7_PORT_POWERDOWN_ENABLE (1 << 23) +#define PLL2_AUX8_SHIFT 24 +#define PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_MASK (1 << 24) +#define PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_DISABLE (0 << 24) +#define PLL2_AUX8_SEQ_PLLCAPPD_ENFORCE_ENABLE (1 << 24) +#define PLL2_AUX9_SHIFT 25 +#define PLL2_AUX9_LVDSEN_ALLOW (0 << 25) +#define PLL2_AUX9_LVDSEN_OVERRIDE (1 << 25) +#define PLL3 0x1a +#define PLL3_PLLVDD_MODE_SHIFT 13 +#define PLL3_PLLVDD_MODE_MASK (1 << 13) +#define PLL3_PLLVDD_MODE_V1_8 (0 << 13) +#define PLL3_PLLVDD_MODE_V3_3 (1 << 13) +#define CSTM 0x1b +#define CSTM_ROTDAT_SHIFT 28 +#define CSTM_ROTDAT_DEFAULT_MASK (7 << 28) +#define CSTM_ROTCLK_SHIFT 24 +#define CSTM_ROTCLK_DEFAULT_MASK (0xf << 24) +#define CSTM_LVDS_EN_SHIFT 16 +#define CSTM_LVDS_EN_DISABLE (0 << 16) +#define CSTM_LVDS_EN_ENABLE (1 << 16) +#define CSTM_LINKACTB_SHIFT 15 +#define CSTM_LINKACTB_DISABLE (0 << 15) +#define CSTM_LINKACTB_ENABLE (1 << 15) +#define CSTM_LINKACTA_SHIFT 14 +#define CSTM_LINKACTA_DISABLE (0 << 14) +#define CSTM_LINKACTA_ENABLE (1 << 14) +#define LVDS 0x1c +#define LVDS_ROTDAT_SHIFT 28 +#define LVDS_ROTDAT_DEFAULT_MASK (7 << 28) +#define LVDS_ROTDAT_RST (0 << 28) +#define LVDS_ROTCLK_SHIFT 24 +#define LVDS_ROTCLK_DEFAULT_MASK (0xf << 24) +#define LVDS_ROTCLK_RST (0 << 24) +#define LVDS_PLLDIV_SHIFT 21 +#define LVDS_PLLDIV_DEFAULT_MASK (1 << 21) +#define LVDS_PLLDIV_BY_7 (0 << 21) +#define LVDS_BALANCED_SHIFT 19 +#define LVDS_BALANCED_DEFAULT_MASK (1 << 19) +#define LVDS_BALANCED_DISABLE (0 << 19) +#define LVDS_BALANCED_ENABLE (1 << 19) +#define LVDS_NEW_MODE_SHIFT 18 +#define LVDS_NEW_MODE_DEFAULT_MASK (1 << 18) +#define LVDS_NEW_MODE_DISABLE (0 << 18) +#define LVDS_NEW_MODE_ENABLE (1 << 18) +#define LVDS_DUP_SYNC_SHIFT 17 +#define LVDS_DUP_SYNC_DEFAULT_MASK (1 << 17) +#define LVDS_DUP_SYNC_DISABLE (0 << 17) +#define LVDS_DUP_SYNC_ENABLE (1 << 17) +#define LVDS_LVDS_EN_SHIFT 16 +#define LVDS_LVDS_EN_DEFAULT_MASK (1 << 16) +#define LVDS_LVDS_EN_ENABLE (1 << 16) +#define LVDS_LINKACTB_SHIFT 15 +#define LVDS_LINKACTB_DEFAULT_MASK (1 << 15) +#define LVDS_LINKACTB_DISABLE (0 << 15) +#define LVDS_LINKACTB_ENABLE (1 << 15) +#define LVDS_LINKACTA_SHIFT 14 +#define LVDS_LINKACTA_DEFAULT_MASK (1 << 14) +#define LVDS_LINKACTA_ENABLE (1 << 14) +#define LVDS_MODE_SHIFT 12 +#define LVDS_MODE_DEFAULT_MASK (3 << 12) +#define LVDS_MODE_LVDS (0 << 12) +#define LVDS_UPPER_SHIFT 11 +#define LVDS_UPPER_DEFAULT_MASK (1 << 11) +#define LVDS_UPPER_FALSE (0 << 11) +#define LVDS_UPPER_TRUE (1 << 11) +#define LVDS_PD_TXCB_SHIFT 9 +#define LVDS_PD_TXCB_DEFAULT_MASK (1 << 9) +#define LVDS_PD_TXCB_ENABLE (0 << 9) +#define LVDS_PD_TXCB_DISABLE (1 << 9) +#define LVDS_PD_TXCA_SHIFT 8 +#define LVDS_PD_TXCA_DEFAULT_MASK (1 << 8) +#define LVDS_PD_TXCA_ENABLE (0 << 8) +#define LVDS_PD_TXDB_3_SHIFT 7 +#define LVDS_PD_TXDB_3_DEFAULT_MASK (1 << 7) +#define LVDS_PD_TXDB_3_ENABLE (0 << 7) +#define LVDS_PD_TXDB_3_DISABLE (1 << 7) +#define LVDS_PD_TXDB_2_SHIFT 6 +#define LVDS_PD_TXDB_2_DEFAULT_MASK (1 << 6) +#define LVDS_PD_TXDB_2_ENABLE (0 << 6) +#define LVDS_PD_TXDB_2_DISABLE (1 << 6) +#define LVDS_PD_TXDB_1_SHIFT 5 +#define LVDS_PD_TXDB_1_DEFAULT_MASK (1 << 5) +#define LVDS_PD_TXDB_1_ENABLE (0 << 5) +#define LVDS_PD_TXDB_1_DISABLE (1 << 5) +#define LVDS_PD_TXDB_0_SHIFT 4 +#define LVDS_PD_TXDB_0_DEFAULT_MASK (1 << 4) +#define LVDS_PD_TXDB_0_ENABLE (0 << 4) +#define LVDS_PD_TXDB_0_DISABLE (1 << 4) +#define LVDS_PD_TXDA_3_SHIFT 3 +#define LVDS_PD_TXDA_3_DEFAULT_MASK (1 << 3) +#define LVDS_PD_TXDA_3_ENABLE (0 << 3) +#define LVDS_PD_TXDA_3_DISABLE (1 << 3) +#define LVDS_PD_TXDA_2_SHIFT 2 +#define LVDS_PD_TXDA_2_DEFAULT_MASK (1 << 2) +#define LVDS_PD_TXDA_2_ENABLE (0 << 2) +#define LVDS_PD_TXDA_1_SHIFT 1 +#define LVDS_PD_TXDA_1_DEFAULT_MASK (1 << 1) +#define LVDS_PD_TXDA_1_ENABLE (0 << 1) +#define LVDS_PD_TXDA_0_SHIFT 0 +#define LVDS_PD_TXDA_0_DEFAULT_MASK 0x1 +#define LVDS_PD_TXDA_0_ENABLE 0 +#define CRCA 0x1d +#define CRCA_VALID_FALSE 0 +#define CRCA_VALID_TRUE 1 +#define CRCA_VALID_RST 1 +#define CRCB 0x1e +#define CRCB_CRC_DEFAULT_MASK 0xffffffff +#define SEQ_CTL 0x20 +#define SEQ_CTL_SWITCH_SHIFT 30 +#define SEQ_CTL_SWITCH_MASK (1 << 30) +#define SEQ_CTL_SWITCH_WAIT (0 << 30) +#define SEQ_CTL_SWITCH_FORCE (1 << 30) +#define SEQ_CTL_STATUS_SHIFT 28 +#define SEQ_CTL_STATUS_MASK (1 << 28) +#define SEQ_CTL_STATUS_STOPPED (0 << 28) +#define SEQ_CTL_STATUS_RUNNING (1 << 28) +#define SEQ_CTL_PC_SHIFT 16 +#define SEQ_CTL_PC_MASK (0xf << 16) +#define SEQ_CTL_PD_PC_ALT_SHIFT 12 +#define SEQ_CTL_PD_PC_ALT_MASK (0xf << 12) +#define SEQ_CTL_PD_PC_SHIFT 8 +#define SEQ_CTL_PD_PC_MASK (0xf << 8) +#define SEQ_CTL_PU_PC_ALT_SHIFT 4 +#define SEQ_CTL_PU_PC_ALT_MASK (0xf << 4) +#define SEQ_CTL_PU_PC_SHIFT 0 +#define SEQ_CTL_PU_PC_MASK 0xf +#define LANE_SEQ_CTL 0x21 +#define LANE_SEQ_CTL_SETTING_NEW_SHIFT 31 +#define LANE_SEQ_CTL_SETTING_MASK (1 << 31) +#define LANE_SEQ_CTL_SETTING_NEW_DONE (0 << 31) +#define LANE_SEQ_CTL_SETTING_NEW_PENDING (1 << 31) +#define LANE_SEQ_CTL_SETTING_NEW_TRIGGER (1 << 31) +#define LANE_SEQ_CTL_SEQ_STATE_SHIFT 28 +#define LANE_SEQ_CTL_SEQ_STATE_IDLE (0 << 28) +#define LANE_SEQ_CTL_SEQ_STATE_BUSY (1 << 28) +#define LANE_SEQ_CTL_SEQUENCE_SHIFT 20 +#define LANE_SEQ_CTL_SEQUENCE_UP (0 << 20) +#define LANE_SEQ_CTL_SEQUENCE_DOWN (1 << 20) +#define LANE_SEQ_CTL_NEW_POWER_STATE_SHIFT 16 +#define LANE_SEQ_CTL_NEW_POWER_STATE_PU (0 << 16) +#define LANE_SEQ_CTL_NEW_POWER_STATE_PD (1 << 16) +#define LANE_SEQ_CTL_DELAY_SHIFT 12 +#define LANE_SEQ_CTL_DELAY_DEFAULT_MASK (0xf << 12) +#define LANE_SEQ_CTL_LANE9_STATE_SHIFT 9 +#define LANE_SEQ_CTL_LANE9_STATE_POWERUP (0 << 9) +#define LANE_SEQ_CTL_LANE9_STATE_POWERDOWN (1 << 9) +#define LANE_SEQ_CTL_LANE8_STATE_SHIFT 8 +#define LANE_SEQ_CTL_LANE8_STATE_POWERUP (0 << 8) +#define LANE_SEQ_CTL_LANE8_STATE_POWERDOWN (1 << 8) +#define LANE_SEQ_CTL_LANE7_STATE_SHIFT 7 +#define LANE_SEQ_CTL_LANE7_STATE_POWERUP (0 << 7) +#define LANE_SEQ_CTL_LANE7_STATE_POWERDOWN (1 << 7) +#define LANE_SEQ_CTL_LANE6_STATE_SHIFT 6 +#define LANE_SEQ_CTL_LANE6_STATE_POWERUP (0 << 6) +#define LANE_SEQ_CTL_LANE6_STATE_POWERDOWN (1 << 6) +#define LANE_SEQ_CTL_LANE5_STATE_SHIFT 5 +#define LANE_SEQ_CTL_LANE5_STATE_POWERUP (0 << 5) +#define LANE_SEQ_CTL_LANE5_STATE_POWERDOWN (1 << 5) +#define LANE_SEQ_CTL_LANE4_STATE_SHIFT 4 +#define LANE_SEQ_CTL_LANE4_STATE_POWERUP (0 << 4) +#define LANE_SEQ_CTL_LANE4_STATE_POWERDOWN (1 << 4) +#define LANE_SEQ_CTL_LANE3_STATE_SHIFT 3 +#define LANE_SEQ_CTL_LANE3_STATE_POWERUP (0 << 3) +#define LANE_SEQ_CTL_LANE3_STATE_POWERDOWN (1 << 3) +#define LANE_SEQ_CTL_LANE2_STATE_SHIFT 2 +#define LANE_SEQ_CTL_LANE2_STATE_POWERUP (0 << 2) +#define LANE_SEQ_CTL_LANE2_STATE_POWERDOWN (1 << 2) +#define LANE_SEQ_CTL_LANE1_STATE_SHIFT 1 +#define LANE_SEQ_CTL_LANE1_STATE_POWERUP (0 << 1) +#define LANE_SEQ_CTL_LANE1_STATE_POWERDOWN (1 << 1) +#define LANE_SEQ_CTL_LANE0_STATE_SHIFT 0 +#define LANE_SEQ_CTL_LANE0_STATE_POWERUP 0 +#define LANE_SEQ_CTL_LANE0_STATE_POWERDOWN 1 +#define SEQ_INST(i) (0x22 + i) +#define SEQ_INST_PLL_PULLDOWN_SHIFT 31 +#define SEQ_INST_PLL_PULLDOWN_DISABLE (0 << 31) +#define SEQ_INST_PLL_PULLDOWN_ENABLE (1 << 31) +#define SEQ_INST_POWERDOWN_MACRO_SHIFT 30 +#define SEQ_INST_POWERDOWN_MACRO_NORMAL (0 << 30) +#define SEQ_INST_POWERDOWN_MACRO_POWERDOWN (1 << 30) +#define SEQ_INST_ASSERT_PLL_RESET_SHIFT 29 +#define SEQ_INST_ASSERT_PLL_RESET_NORMAL (0 << 29) +#define SEQ_INST_ASSERT_PLL_RESET_RST (1 << 29) +#define SEQ_INST_BLANK_V_SHIFT 28 +#define SEQ_INST_BLANK_V_NORMAL (0 << 28) +#define SEQ_INST_BLANK_V_INACTIVE (1 << 28) +#define SEQ_INST_BLANK_H_SHIFT 27 +#define SEQ_INST_BLANK_H_NORMAL (0 << 27) +#define SEQ_INST_BLANK_H_INACTIVE (1 << 27) +#define SEQ_INST_BLANK_DE_SHIFT 26 +#define SEQ_INST_BLANK_DE_NORMAL (0 << 26) +#define SEQ_INST_BLANK_DE_INACTIVE (1 << 26) +#define SEQ_INST_BLACK_DATA_SHIFT 25 +#define SEQ_INST_BLACK_DATA_NORMAL (0 << 25) +#define SEQ_INST_BLACK_DATA_BLACK (1 << 25) +#define SEQ_INST_TRISTATE_IOS_SHIFT 24 +#define SEQ_INST_TRISTATE_IOS_ENABLE_PINS (0 << 24) +#define SEQ_INST_TRISTATE_IOS_TRISTATE (1 << 24) +#define SEQ_INST_DRIVE_PWM_OUT_LO_SHIFT 23 +#define SEQ_INST_DRIVE_PWM_OUT_LO_FALSE (0 << 23) +#define SEQ_INST_DRIVE_PWM_OUT_LO_TRUE (1 << 23) +#define SEQ_INST_PIN_B_SHIFT 22 +#define SEQ_INST_PIN_B_LOW (0 << 22) +#define SEQ_INST_PIN_B_HIGH (1 << 22) +#define SEQ_INST_PIN_A_SHIFT 21 +#define SEQ_INST_PIN_A_LOW (0 << 21) +#define SEQ_INST_PIN_A_HIGH (1 << 21) +#define SEQ_INST_SEQUENCE_SHIFT 19 +#define SEQ_INST_SEQUENCE_UP (0 << 19) +#define SEQ_INST_SEQUENCE_DOWN (1 << 19) +#define SEQ_INST_LANE_SEQ_SHIFT 18 +#define SEQ_INST_LANE_SEQ_STOP (0 << 18) +#define SEQ_INST_LANE_SEQ_RUN (1 << 18) +#define SEQ_INST_PDPORT_SHIFT 17 +#define SEQ_INST_PDPORT_NO (0 << 17) +#define SEQ_INST_PDPORT_YES (1 << 17) +#define SEQ_INST_PDPLL_SHIFT 16 +#define SEQ_INST_PDPLL_NO (0 << 16) +#define SEQ_INST_PDPLL_YES (1 << 16) +#define SEQ_INST_HALT_SHIFT 15 +#define SEQ_INST_HALT_FALSE (0 << 15) +#define SEQ_INST_HALT_TRUE (1 << 15) +#define SEQ_INST_WAIT_UNITS_SHIFT 12 +#define SEQ_INST_WAIT_UNITS_DEFAULT_MASK (3 << 12) +#define SEQ_INST_WAIT_UNITS_US (0 << 12) +#define SEQ_INST_WAIT_UNITS_MS (1 << 12) +#define SEQ_INST_WAIT_UNITS_VSYNC (2 << 12) +#define SEQ_INST_WAIT_TIME_SHIFT 0 +#define SEQ_INST_WAIT_TIME_DEFAULT_MASK 0x3ff +#define PWM_DIV 0x32 +#define PWM_DIV_DIVIDE_DEFAULT_MASK 0xffffff +#define PWM_CTL 0x33 +#define PWM_CTL_SETTING_NEW_SHIFT 31 +#define PWM_CTL_SETTING_NEW_DONE (0 << 31) +#define PWM_CTL_SETTING_NEW_PENDING (1 << 31) +#define PWM_CTL_SETTING_NEW_TRIGGER (1 << 31) +#define PWM_CTL_CLKSEL_SHIFT 30 +#define PWM_CTL_CLKSEL_PCLK (0 << 30) +#define PWM_CTL_CLKSEL_XTAL (1 << 30) +#define PWM_CTL_DUTY_CYCLE_SHIFT 0 +#define PWM_CTL_DUTY_CYCLE_MASK 0xffffff +#define MSCHECK 0x49 +#define MSCHECK_CTL_SHIFT 31 +#define MSCHECK_CTL_CLEAR (0 << 31) +#define MSCHECK_CTL_RUN (1 << 31) +#define XBAR_CTRL 0x4a +#define DP_LINKCTL(i) (0x4c + (i)) +#define DP_LINKCTL_FORCE_IDLEPTTRN_SHIFT 31 +#define DP_LINKCTL_FORCE_IDLEPTTRN_NO (0 << 31) +#define DP_LINKCTL_FORCE_IDLEPTTRN_YES (1 << 31) +#define DP_LINKCTL_COMPLIANCEPTTRN_SHIFT 28 +#define DP_LINKCTL_COMPLIANCEPTTRN_NOPATTERN (0 << 28) +#define DP_LINKCTL_COMPLIANCEPTTRN_COLORSQARE (1 << 28) +#define DP_LINKCTL_LANECOUNT_SHIFT 16 +#define DP_LINKCTL_LANECOUNT_MASK (0x1f << 16) +#define DP_LINKCTL_LANECOUNT_ZERO (0 << 16) +#define DP_LINKCTL_LANECOUNT_ONE (1 << 16) +#define DP_LINKCTL_LANECOUNT_TWO (3 << 16) +#define DP_LINKCTL_LANECOUNT_FOUR (15 << 16) +#define DP_LINKCTL_ENHANCEDFRAME_SHIFT 14 +#define DP_LINKCTL_ENHANCEDFRAME_DISABLE (0 << 14) +#define DP_LINKCTL_ENHANCEDFRAME_ENABLE (1 << 14) +#define DP_LINKCTL_SYNCMODE_SHIFT 10 +#define DP_LINKCTL_SYNCMODE_DISABLE (0 << 10) +#define DP_LINKCTL_SYNCMODE_ENABLE (1 << 10) +#define DP_LINKCTL_TUSIZE_SHIFT 2 +#define DP_LINKCTL_TUSIZE_MASK (0x7f << 2) +#define DP_LINKCTL_ENABLE_SHIFT 0 +#define DP_LINKCTL_ENABLE_NO 0 +#define DP_LINKCTL_ENABLE_YES 1 +#define DC(i) (0x4e + (i)) +#define DC_LANE3_DP_LANE3_SHIFT 24 +#define DC_LANE3_DP_LANE3_MASK (0xff << 24) +#define DC_LANE3_DP_LANE3_P0_LEVEL0 (17 << 24) +#define DC_LANE3_DP_LANE3_P1_LEVEL0 (21 << 24) +#define DC_LANE3_DP_LANE3_P2_LEVEL0 (26 << 24) +#define DC_LANE3_DP_LANE3_P3_LEVEL0 (34 << 24) +#define DC_LANE3_DP_LANE3_P0_LEVEL1 (26 << 24) +#define DC_LANE3_DP_LANE3_P1_LEVEL1 (32 << 24) +#define DC_LANE3_DP_LANE3_P2_LEVEL1 (39 << 24) +#define DC_LANE3_DP_LANE3_P0_LEVEL2 (34 << 24) +#define DC_LANE3_DP_LANE3_P1_LEVEL2 (43 << 24) +#define DC_LANE3_DP_LANE3_P0_LEVEL3 (51 << 24) +#define DC_LANE2_DP_LANE0_SHIFT 16 +#define DC_LANE2_DP_LANE0_MASK (0xff << 16) +#define DC_LANE2_DP_LANE0_P0_LEVEL0 (17 << 16) +#define DC_LANE2_DP_LANE0_P1_LEVEL0 (21 << 16) +#define DC_LANE2_DP_LANE0_P2_LEVEL0 (26 << 16) +#define DC_LANE2_DP_LANE0_P3_LEVEL0 (34 << 16) +#define DC_LANE2_DP_LANE0_P0_LEVEL1 (26 << 16) +#define DC_LANE2_DP_LANE0_P1_LEVEL1 (32 << 16) +#define DC_LANE2_DP_LANE0_P2_LEVEL1 (39 << 16) +#define DC_LANE2_DP_LANE0_P0_LEVEL2 (34 << 16) +#define DC_LANE2_DP_LANE0_P1_LEVEL2 (43 << 16) +#define DC_LANE2_DP_LANE0_P0_LEVEL3 (51 << 16) +#define DC_LANE1_DP_LANE1_SHIFT 8 +#define DC_LANE1_DP_LANE1_MASK (0xff << 8) +#define DC_LANE1_DP_LANE1_P0_LEVEL0 (17 << 8) +#define DC_LANE1_DP_LANE1_P1_LEVEL0 (21 << 8) +#define DC_LANE1_DP_LANE1_P2_LEVEL0 (26 << 8) +#define DC_LANE1_DP_LANE1_P3_LEVEL0 (34 << 8) +#define DC_LANE1_DP_LANE1_P0_LEVEL1 (26 << 8) +#define DC_LANE1_DP_LANE1_P1_LEVEL1 (32 << 8) +#define DC_LANE1_DP_LANE1_P2_LEVEL1 (39 << 8) +#define DC_LANE1_DP_LANE1_P0_LEVEL2 (34 << 8) +#define DC_LANE1_DP_LANE1_P1_LEVEL2 (43 << 8) +#define DC_LANE1_DP_LANE1_P0_LEVEL3 (51 << 8) +#define DC_LANE0_DP_LANE2_SHIFT 0 +#define DC_LANE0_DP_LANE2_MASK 0xff +#define DC_LANE0_DP_LANE2_P0_LEVEL0 17 +#define DC_LANE0_DP_LANE2_P1_LEVEL0 21 +#define DC_LANE0_DP_LANE2_P2_LEVEL0 26 +#define DC_LANE0_DP_LANE2_P3_LEVEL0 34 +#define DC_LANE0_DP_LANE2_P0_LEVEL1 26 +#define DC_LANE0_DP_LANE2_P1_LEVEL1 32 +#define DC_LANE0_DP_LANE2_P2_LEVEL1 39 +#define DC_LANE0_DP_LANE2_P0_LEVEL2 34 +#define DC_LANE0_DP_LANE2_P1_LEVEL2 43 +#define DC_LANE0_DP_LANE2_P0_LEVEL3 51 +#define LANE_DRIVE_CURRENT(i) (0x4e + (i)) +#define PR(i) (0x52 + (i)) +#define PR_LANE3_DP_LANE3_SHIFT 24 +#define PR_LANE3_DP_LANE3_MASK (0xff << 24) +#define PR_LANE3_DP_LANE3_D0_LEVEL0 (0 << 24) +#define PR_LANE3_DP_LANE3_D1_LEVEL0 (0 << 24) +#define PR_LANE3_DP_LANE3_D2_LEVEL0 (0 << 24) +#define PR_LANE3_DP_LANE3_D3_LEVEL0 (0 << 24) +#define PR_LANE3_DP_LANE3_D0_LEVEL1 (4 << 24) +#define PR_LANE3_DP_LANE3_D1_LEVEL1 (6 << 24) +#define PR_LANE3_DP_LANE3_D2_LEVEL1 (17 << 24) +#define PR_LANE3_DP_LANE3_D0_LEVEL2 (8 << 24) +#define PR_LANE3_DP_LANE3_D1_LEVEL2 (13 << 24) +#define PR_LANE3_DP_LANE3_D0_LEVEL3 (17 << 24) +#define PR_LANE2_DP_LANE0_SHIFT 16 +#define PR_LANE2_DP_LANE0_MASK (0xff << 16) +#define PR_LANE2_DP_LANE0_D0_LEVEL0 (0 << 16) +#define PR_LANE2_DP_LANE0_D1_LEVEL0 (0 << 16) +#define PR_LANE2_DP_LANE0_D2_LEVEL0 (0 << 16) +#define PR_LANE2_DP_LANE0_D3_LEVEL0 (0 << 16) +#define PR_LANE2_DP_LANE0_D0_LEVEL1 (4 << 16) +#define PR_LANE2_DP_LANE0_D1_LEVEL1 (6 << 16) +#define PR_LANE2_DP_LANE0_D2_LEVEL1 (17 << 16) +#define PR_LANE2_DP_LANE0_D0_LEVEL2 (8 << 16) +#define PR_LANE2_DP_LANE0_D1_LEVEL2 (13 << 16) +#define PR_LANE2_DP_LANE0_D0_LEVEL3 (17 << 16) +#define PR_LANE1_DP_LANE1_SHIFT 8 +#define PR_LANE1_DP_LANE1_MASK (0xff >> 8) +#define PR_LANE1_DP_LANE1_D0_LEVEL0 (0 >> 8) +#define PR_LANE1_DP_LANE1_D1_LEVEL0 (0 >> 8) +#define PR_LANE1_DP_LANE1_D2_LEVEL0 (0 >> 8) +#define PR_LANE1_DP_LANE1_D3_LEVEL0 (0 >> 8) +#define PR_LANE1_DP_LANE1_D0_LEVEL1 (4 >> 8) +#define PR_LANE1_DP_LANE1_D1_LEVEL1 (6 >> 8) +#define PR_LANE1_DP_LANE1_D2_LEVEL1 (17 >> 8) +#define PR_LANE1_DP_LANE1_D0_LEVEL2 (8 >> 8) +#define PR_LANE1_DP_LANE1_D1_LEVEL2 (13 >> 8) +#define PR_LANE1_DP_LANE1_D0_LEVEL3 (17 >> 8) +#define PR_LANE0_DP_LANE2_SHIFT 0 +#define PR_LANE0_DP_LANE2_MASK 0xff +#define PR_LANE0_DP_LANE2_D0_LEVEL0 0 +#define PR_LANE0_DP_LANE2_D1_LEVEL0 0 +#define PR_LANE0_DP_LANE2_D2_LEVEL0 0 +#define PR_LANE0_DP_LANE2_D3_LEVEL0 0 +#define PR_LANE0_DP_LANE2_D0_LEVEL1 4 +#define PR_LANE0_DP_LANE2_D1_LEVEL1 6 +#define PR_LANE0_DP_LANE2_D2_LEVEL1 17 +#define PR_LANE0_DP_LANE2_D0_LEVEL2 8 +#define PR_LANE0_DP_LANE2_D1_LEVEL2 13 +#define PR_LANE0_DP_LANE2_D0_LEVEL3 17 +#define LANE4_PREEMPHASIS(i) (0x54 + (i)) +#define POSTCURSOR(i) (0x56 + (i)) +#define DP_CONFIG(i) (0x58 + (i)) +#define DP_CONFIG_RD_RESET_VAL_SHIFT 31 +#define DP_CONFIG_RD_RESET_VAL_POSITIVE (0 << 31) +#define DP_CONFIG_RD_RESET_VAL_NEGATIVE (1 << 31) +#define DP_CONFIG_IDLE_BEFORE_ATTACH_SHIFT 28 +#define DP_CONFIG_IDLE_BEFORE_ATTACH_DISABLE (0 << 28) +#define DP_CONFIG_IDLE_BEFORE_ATTACH_ENABLE (1 << 28) +#define DP_CONFIG_ACTIVESYM_CNTL_SHIFT 26 +#define DP_CONFIG_ACTIVESYM_CNTL_DISABLE (0 << 26) +#define DP_CONFIG_ACTIVESYM_CNTL_ENABLE (1 << 26) +#define DP_CONFIG_ACTIVESYM_POLARITY_SHIFT 24 +#define DP_CONFIG_ACTIVESYM_POLARITY_NEGATIVE (0 << 24) +#define DP_CONFIG_ACTIVESYM_POLARITY_POSITIVE (1 << 24) +#define DP_CONFIG_ACTIVESYM_FRAC_SHIFT 16 +#define DP_CONFIG_ACTIVESYM_FRAC_MASK (0xf << 16) +#define DP_CONFIG_ACTIVESYM_COUNT_SHIFT 8 +#define DP_CONFIG_ACTIVESYM_COUNT_MASK (0x7f << 8) +#define DP_CONFIG_WATERMARK_SHIFT 0 +#define DP_CONFIG_WATERMARK_MASK 0x3f +#define DP_MN(i) (0x5a + i) +#define DP_MN_M_MOD_SHIFT 30 +#define DP_MN_M_MOD_DEFAULT_MASK (3 << 30) +#define DP_MN_M_MOD_NONE (0 << 30) +#define DP_MN_M_MOD_INC (1 << 30) +#define DP_MN_M_MOD_DEC (2 << 30) +#define DP_MN_M_DELTA_SHIFT 24 +#define DP_MN_M_DELTA_DEFAULT_MASK (0xf << 24) +#define DP_MN_N_VAL_SHIFT 0 +#define DP_MN_N_VAL_DEFAULT_MASK 0xffffff +#define DP_PADCTL(i) (0x5c + (i)) +#define DP_PADCTL_SPARE_SHIFT 25 +#define DP_PADCTL_SPARE_DEFAULT_MASK (0x7f << 25) +#define DP_PADCTL_VCO_2X_SHIFT 24 +#define DP_PADCTL_VCO_2X_DISABLE (0 << 24) +#define DP_PADCTL_VCO_2X_ENABLE (1 << 24) +#define DP_PADCTL_PAD_CAL_PD_SHIFT 23 +#define DP_PADCTL_PAD_CAL_PD_POWERUP (0 << 23) +#define DP_PADCTL_PAD_CAL_PD_POWERDOWN (1 << 23) +#define DP_PADCTL_TX_PU_SHIFT 22 +#define DP_PADCTL_TX_PU_DISABLE (0 << 22) +#define DP_PADCTL_TX_PU_ENABLE (1 << 22) +#define DP_PADCTL_TX_PU_MASK (1 << 22) +#define DP_PADCTL_REG_CTRL_SHIFT 20 +#define DP_PADCTL_REG_CTRL_DEFAULT_MASK (3 << 20) +#define DP_PADCTL_VCMMODE_SHIFT 16 +#define DP_PADCTL_VCMMODE_DEFAULT_MASK (0xf << 16) +#define DP_PADCTL_VCMMODE_TRISTATE (0 << 16) +#define DP_PADCTL_VCMMODE_TEST_MUX (1 << 16) +#define DP_PADCTL_VCMMODE_WEAK_PULLDOWN (2 << 16) +#define DP_PADCTL_VCMMODE_STRONG_PULLDOWN (4 << 16) +#define DP_PADCTL_TX_PU_VALUE_SHIFT 8 +#define DP_PADCTL_TX_PU_VALUE_DEFAULT_MASK (0xff << 8) +#define DP_PADCTL_COMODE_TXD_3_DP_TXD_3_SHIFT 7 +#define DP_PADCTL_COMODE_TXD_3_DP_TXD_3_DISABLE (0 << 7) +#define DP_PADCTL_COMODE_TXD_3_DP_TXD_3_ENABLE (1 << 7) +#define DP_PADCTL_COMODE_TXD_2_DP_TXD_0_SHIFT 6 +#define DP_PADCTL_COMODE_TXD_2_DP_TXD_0_DISABLE (0 << 6) +#define DP_PADCTL_COMODE_TXD_2_DP_TXD_0_ENABLE (1 << 6) +#define DP_PADCTL_COMODE_TXD_1_DP_TXD_1_SHIFT 5 +#define DP_PADCTL_COMODE_TXD_1_DP_TXD_1_DISABLE (0 << 5) +#define DP_PADCTL_COMODE_TXD_1_DP_TXD_1_ENABLE (1 << 5) +#define DP_PADCTL_COMODE_TXD_0_DP_TXD_2_SHIFT 4 +#define DP_PADCTL_COMODE_TXD_0_DP_TXD_2_DISABLE (0 << 4) +#define DP_PADCTL_COMODE_TXD_0_DP_TXD_2_ENABLE (1 << 4) +#define DP_PADCTL_PD_TXD_3_SHIFT 3 +#define DP_PADCTL_PD_TXD_3_YES (0 << 3) +#define DP_PADCTL_PD_TXD_3_NO (1 << 3) +#define DP_PADCTL_PD_TXD_0_SHIFT 2 +#define DP_PADCTL_PD_TXD_0_YES (0 << 2) +#define DP_PADCTL_PD_TXD_0_NO (1 << 2) +#define DP_PADCTL_PD_TXD_1_SHIFT 1 +#define DP_PADCTL_PD_TXD_1_YES (0 << 1) +#define DP_PADCTL_PD_TXD_1_NO (1 << 1) +#define DP_PADCTL_PD_TXD_2_SHIFT 0 +#define DP_PADCTL_PD_TXD_2_YES 0 +#define DP_PADCTL_PD_TXD_2_NO 1 +#define DP_DEBUG(i) (0x5e + i) +#define DP_SPARE(i) (0x60 + (i)) +#define DP_SPARE_REG_SHIFT 3 +#define DP_SPARE_REG_DEFAULT_MASK (0x1fffffff << 3) +#define DP_SPARE_SOR_CLK_SEL_SHIFT 2 +#define DP_SPARE_SOR_CLK_SEL_DEFAULT_MASK (1 << 2) +#define DP_SPARE_SOR_CLK_SEL_SAFE_SORCLK (0 << 2) +#define DP_SPARE_SOR_CLK_SEL_MACRO_SORCLK (1 << 2) +#define DP_SPARE_PANEL_SHIFT 1 +#define DP_SPARE_PANEL_EXTERNAL (0 << 1) +#define DP_SPARE_PANEL_INTERNAL (1 << 1) +#define DP_SPARE_SEQ_ENABLE_SHIFT 0 +#define DP_SPARE_SEQ_ENABLE_NO 0 +#define DP_SPARE_SEQ_ENABLE_YES 1 +#define DP_AUDIO_CTRL 0x62 +#define DP_AUDIO_HBLANK_SYMBOLS 0x63 +#define DP_AUDIO_HBLANK_SYMBOLS_MASK 0x1ffff +#define DP_AUDIO_HBLANK_SYMBOLS_VALUE_SHIFT 0 +#define DP_AUDIO_VBLANK_SYMBOLS 0x64 +#define DP_AUDIO_VBLANK_SYMBOLS_MASK 0x1ffff +#define DP_AUDIO_VBLANK_SYMBOLS_SHIFT 0 +#define DP_GENERIC_INFOFRAME_HEADER 0x65 +#define DP_GENERIC_INFOFRAME_SUBPACK(i) (0x66 + (i)) +#define DP_TPG 0x6d +#define DP_TPG_LANE3_CHANNELCODING_SHIFT 30 +#define DP_TPG_LANE3_CHANNELCODING_DISABLE (0 << 30) +#define DP_TPG_LANE3_CHANNELCODING_ENABLE (1 << 30) +#define DP_TPG_LANE3_SCRAMBLEREN_SHIFT 28 +#define DP_TPG_LANE3_SCRAMBLEREN_ENABLE_GALIOS (1 << 28) +#define DP_TPG_LANE3_SCRAMBLEREN_ENABLE_FIBONACCI (2 << 28) +#define DP_TPG_LANE3_PATTERN_SHIFT 24 +#define DP_TPG_LANE3_PATTERN_DEFAULT_MASK (0xf << 24) +#define DP_TPG_LANE3_PATTERN_NOPATTERN (0 << 24) +#define DP_TPG_LANE3_PATTERN_TRAINING1 (1 << 24) +#define DP_TPG_LANE3_PATTERN_TRAINING2 (2 << 24) +#define DP_TPG_LANE3_PATTERN_TRAINING3 (3 << 24) +#define DP_TPG_LANE3_PATTERN_D102 (4 << 24) +#define DP_TPG_LANE3_PATTERN_SBLERRRATE (5 << 24) +#define DP_TPG_LANE3_PATTERN_PRBS7 (6 << 24) +#define DP_TPG_LANE3_PATTERN_CSTM (7 << 24) +#define DP_TPG_LANE3_PATTERN_HBR2_COMPLIANCE (8 << 24) +#define DP_TPG_LANE2_CHANNELCODING_SHIFT 22 +#define DP_TPG_LANE2_CHANNELCODING_DISABLE (0 << 22) +#define DP_TPG_LANE2_CHANNELCODING_ENABLE (1 << 22) +#define DP_TPG_LANE2_SCRAMBLEREN_SHIFT 20 +#define DP_TPG_LANE2_SCRAMBLEREN_DEFAULT_MASK (3 << 20) +#define DP_TPG_LANE2_SCRAMBLEREN_DISABLE (0 << 20) +#define DP_TPG_LANE2_SCRAMBLEREN_ENABLE_GALIOS (1 << 20) +#define DP_TPG_LANE2_SCRAMBLEREN_ENABLE_FIBONACCI (2 << 20) +#define DP_TPG_LANE2_PATTERN_SHIFT 16 +#define DP_TPG_LANE2_PATTERN_DEFAULT_MASK (0xf << 16) +#define DP_TPG_LANE2_PATTERN_NOPATTERN (0 << 16) +#define DP_TPG_LANE2_PATTERN_TRAINING1 (1 << 16) +#define DP_TPG_LANE2_PATTERN_TRAINING2 (2 << 16) +#define DP_TPG_LANE2_PATTERN_TRAINING3 (3 << 16) +#define DP_TPG_LANE2_PATTERN_D102 (4 << 16) +#define DP_TPG_LANE2_PATTERN_SBLERRRATE (5 << 16) +#define DP_TPG_LANE2_PATTERN_PRBS7 (6 << 16) +#define DP_TPG_LANE2_PATTERN_CSTM (7 << 16) +#define DP_TPG_LANE2_PATTERN_HBR2_COMPLIANCE (8 << 16) +#define DP_TPG_LANE1_CHANNELCODING_SHIFT 14 +#define DP_TPG_LANE1_CHANNELCODING_DISABLE (0 << 14) +#define DP_TPG_LANE1_CHANNELCODING_ENABLE (1 << 14) +#define DP_TPG_LANE1_SCRAMBLEREN_SHIFT 12 +#define DP_TPG_LANE1_SCRAMBLEREN_DEFAULT_MASK (3 << 12) +#define DP_TPG_LANE1_SCRAMBLEREN_DISABLE (0 << 12) +#define DP_TPG_LANE1_SCRAMBLEREN_ENABLE_GALIOS (1 << 12) +#define DP_TPG_LANE1_SCRAMBLEREN_ENABLE_FIBONACCI (2 << 12) +#define DP_TPG_LANE1_PATTERN_SHIFT 8 +#define DP_TPG_LANE1_PATTERN_DEFAULT_MASK (0xf << 8) +#define DP_TPG_LANE1_PATTERN_NOPATTERN (0 << 8) +#define DP_TPG_LANE1_PATTERN_TRAINING1 (1 << 8) +#define DP_TPG_LANE1_PATTERN_TRAINING2 (2 << 8) +#define DP_TPG_LANE1_PATTERN_TRAINING3 (3 << 8) +#define DP_TPG_LANE1_PATTERN_D102 (4 << 8) +#define DP_TPG_LANE1_PATTERN_SBLERRRATE (5 << 8) +#define DP_TPG_LANE1_PATTERN_PRBS7 (6 << 8) +#define DP_TPG_LANE1_PATTERN_CSTM (7 << 8) +#define DP_TPG_LANE1_PATTERN_HBR2_COMPLIANCE (8 << 8) +#define DP_TPG_LANE0_CHANNELCODING_SHIFT 6 +#define DP_TPG_LANE0_CHANNELCODING_DISABLE (0 << 6) +#define DP_TPG_LANE0_CHANNELCODING_ENABLE (1 << 6) +#define DP_TPG_LANE0_SCRAMBLEREN_SHIFT 4 +#define DP_TPG_LANE0_SCRAMBLEREN_DEFAULT_MASK (3 << 4) +#define DP_TPG_LANE0_SCRAMBLEREN_DISABLE (0 << 4) +#define DP_TPG_LANE0_SCRAMBLEREN_ENABLE_GALIOS (1 << 4) +#define DP_TPG_LANE0_SCRAMBLEREN_ENABLE_FIBONACCI (2 << 4) +#define DP_TPG_LANE0_PATTERN_SHIFT 0 +#define DP_TPG_LANE0_PATTERN_DEFAULT_MASK 0xf +#define DP_TPG_LANE0_PATTERN_NOPATTERN 0 +#define DP_TPG_LANE0_PATTERN_TRAINING1 1 +#define DP_TPG_LANE0_PATTERN_TRAINING2 2 +#define DP_TPG_LANE0_PATTERN_TRAINING3 3 +#define DP_TPG_LANE0_PATTERN_D102 4 +#define DP_TPG_LANE0_PATTERN_SBLERRRATE 5 +#define DP_TPG_LANE0_PATTERN_PRBS7 6 +#define DP_TPG_LANE0_PATTERN_CSTM 7 +#define DP_TPG_LANE0_PATTERN_HBR2_COMPLIANCE 8 + +enum { + training_pattern_disabled = 0, + training_pattern_1 = 1, + training_pattern_2 = 2, + training_pattern_3 = 3, + training_pattern_none = 0xff +}; + +enum tegra_dc_sor_protocol { + SOR_DP, + SOR_LVDS, +}; + +#define SOR_LINK_SPEED_G1_62 6 +#define SOR_LINK_SPEED_G2_7 10 +#define SOR_LINK_SPEED_G5_4 20 +#define SOR_LINK_SPEED_LVDS 7 + +struct tegra_dp_link_config { + int is_valid; + + /* Supported configuration */ + u8 max_link_bw; + u8 max_lane_count; + int downspread; + int support_enhanced_framing; + u32 bits_per_pixel; + int alt_scramber_reset_cap; /* true for eDP */ + int only_enhanced_framing; /* enhanced_frame_en ignored */ + + /* Actual configuration */ + u8 link_bw; + u8 lane_count; + int enhanced_framing; + int scramble_ena; + + u32 activepolarity; + u32 active_count; + u32 tu_size; + u32 active_frac; + u32 watermark; + + s32 hblank_sym; + s32 vblank_sym; + + /* Training data */ + u32 drive_current; + u32 preemphasis; + u32 postcursor; +}; + +struct tegra_dc_sor_data { + void *base; + void *pmc_base; + u8 portnum; /* 0 or 1 */ + int power_is_up; +}; + +#define TEGRA_SOR_TIMEOUT_MS 1000 +#define TEGRA_SOR_ATTACH_TIMEOUT_MS 1000 + +int tegra_dc_sor_enable_dp(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg); +int tegra_dc_sor_set_power_state(struct tegra_dc_sor_data *sor, int pu_pd); +void tegra_dc_sor_set_dp_linkctl(struct tegra_dc_sor_data *sor, int ena, + u8 training_pattern, const struct tegra_dp_link_config *link_cfg); +void tegra_dc_sor_set_link_bandwidth(struct tegra_dc_sor_data *sor, u8 link_bw); +void tegra_dc_sor_set_lane_count(struct tegra_dc_sor_data *sor, u8 lane_count); +void tegra_dc_sor_set_panel_power(struct tegra_dc_sor_data *sor, + int power_up); +void tegra_dc_sor_set_internal_panel(struct tegra_dc_sor_data *sor, int is_int); +void tegra_dc_sor_read_link_config(struct tegra_dc_sor_data *sor, u8 *link_bw, + u8 *lane_count); +void tegra_dc_sor_set_lane_parm(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg); +void tegra_dc_sor_power_down_unused_lanes(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg); + +int tegra_dc_sor_attach(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg, + const struct display_timing *timing); +int tegra_dc_sor_init(struct tegra_dc_sor_data **sorp); +#endif diff --git a/include/fdtdec.h b/include/fdtdec.h index 4b0ebfb..4ee5a81 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -120,6 +120,9 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */ + COMPAT_NVIDIA_TEGRA124_DC, /* Tegra 124 Display controller */ + COMPAT_NVIDIA_TEGRA124_SOR, /* Tegra 124 Serial Output Resource */ + COMPAT_NVIDIA_TEGRA124_PMC, /* Tegra 124 power mgmt controller */ COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 4755ca0..a50e517 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -29,6 +29,9 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA20_KBC, "nvidia,tegra20-kbc"), COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"), COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"), + COMPAT(NVIDIA_TEGRA124_DC, "nvidia,tegra124-dc"), + COMPAT(NVIDIA_TEGRA124_SOR, "nvidia,tegra124-sor"), + COMPAT(NVIDIA_TEGRA124_PMC, "nvidia,tegra124-pmc"), COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"), COMPAT(NVIDIA_TEGRA124_SDMMC, "nvidia,tegra124-sdhci"), COMPAT(NVIDIA_TEGRA30_SDMMC, "nvidia,tegra30-sdhci"),

Connect up the clocks and the eDP driver to make these displays work with Tegra124-based devices.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Change parameters of update_display_mode()

Changes in v2: - Rebase on top of u-boot-dm

arch/arm/include/asm/arch-tegra124/display.h | 58 +++++ drivers/video/Kconfig | 8 + drivers/video/tegra124/Makefile | 2 + drivers/video/tegra124/display.c | 358 +++++++++++++++++++++++++++ drivers/video/tegra124/tegra124-lcd.c | 94 +++++++ 5 files changed, 520 insertions(+) create mode 100644 arch/arm/include/asm/arch-tegra124/display.h create mode 100644 drivers/video/tegra124/display.c create mode 100644 drivers/video/tegra124/tegra124-lcd.c

diff --git a/arch/arm/include/asm/arch-tegra124/display.h b/arch/arm/include/asm/arch-tegra124/display.h new file mode 100644 index 0000000..ca6644a --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/display.h @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_TEGRA_DISPLAY_H +#define __ASM_ARCH_TEGRA_DISPLAY_H + +/** + * Register a new display based on device tree configuration. + * + * The frame buffer can be positioned by U-Boot or overriden by the fdt. + * You should pass in the U-Boot address here, and check the contents of + * struct fdt_disp_config to see what was actually chosen. + * + * @param blob Device tree blob + * @param default_lcd_base Default address of LCD frame buffer + * @return 0 if ok, -1 on error (unsupported bits per pixel) + */ +int tegra_display_probe(const void *blob, void *default_lcd_base); + +/** + * Return the current display configuration + * + * @return pointer to display configuration, or NULL if there is no valid + * config + */ +struct fdt_disp_config *tegra_display_get_config(void); + +/** + * Perform the next stage of the LCD init if it is time to do so. + * + * LCD init can be time-consuming because of the number of delays we need + * while waiting for the backlight power supply, etc. This function can + * be called at various times during U-Boot operation to advance the + * initialization of the LCD to the next stage if sufficient time has + * passed since the last stage. It keeps track of what stage it is up to + * and the time that it is permitted to move to the next stage. + * + * The final call should have wait=1 to complete the init. + * + * @param blob fdt blob containing LCD information + * @param wait 1 to wait until all init is complete, and then return + * 0 to return immediately, potentially doing nothing if it is + * not yet time for the next init. + */ +int tegra_lcd_check_next_stage(const void *blob, int wait); + +/** + * Set up the maximum LCD size so we can size the frame buffer. + * + * @param blob fdt blob containing LCD information + */ +void tegra_lcd_early_init(const void *blob); + +#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/ diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 62af63a..2544301 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -95,3 +95,11 @@ config DISPLAY_PORT eDP (Embedded DisplayPort) is a standard widely used in laptops to drive LCD panels. This framework provides support for enabling these displays where supported by the video hardware. + +config VIDEO_TEGRA124 + bool "Enable video support on Tegra124" + help + Tegra124 supports many video output options including eDP and + HDMI. At present only eDP is supported by U-Boot. This option + enables this support which can be used on devices which + have an eDP display connected. diff --git a/drivers/video/tegra124/Makefile b/drivers/video/tegra124/Makefile index 7e08ee9..52eedb0 100644 --- a/drivers/video/tegra124/Makefile +++ b/drivers/video/tegra124/Makefile @@ -4,5 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #

+obj-y += display.o obj-y += dp.o obj-y += sor.o +obj-y += tegra124-lcd.o diff --git a/drivers/video/tegra124/display.c b/drivers/video/tegra124/display.c new file mode 100644 index 0000000..372ad3e --- /dev/null +++ b/drivers/video/tegra124/display.c @@ -0,0 +1,358 @@ +/* + * Copyright 2014 Google Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Extracted from Chromium coreboot commit 3f59b13d + */ + +#include <common.h> +#include <dm.h> +#include <edid.h> +#include <errno.h> +#include <displayport.h> +#include <edid.h> +#include <fdtdec.h> +#include <lcd.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/pwm.h> +#include <asm/arch-tegra/dc.h> +#include "displayport.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* return in 1000ths of a Hertz */ +static int tegra_dc_calc_refresh(const struct display_timing *timing) +{ + int h_total, v_total, refresh; + int pclk = timing->pixelclock.typ; + + h_total = timing->hactive.typ + timing->hfront_porch.typ + + timing->hback_porch.typ + timing->hsync_len.typ; + v_total = timing->vactive.typ + timing->vfront_porch.typ + + timing->vback_porch.typ + timing->vsync_len.typ; + if (!pclk || !h_total || !v_total) + return 0; + refresh = pclk / h_total; + refresh *= 1000; + refresh /= v_total; + + return refresh; +} + +static void print_mode(const struct display_timing *timing) +{ + int refresh = tegra_dc_calc_refresh(timing); + + debug("MODE:%dx%d@%d.%03uHz pclk=%d\n", + timing->hactive.typ, timing->vactive.typ, refresh / 1000, + refresh % 1000, timing->pixelclock.typ); +} + +static int update_display_mode(struct dc_ctlr *disp_ctrl, + const struct display_timing *timing, + int href_to_sync, int vref_to_sync) +{ + print_mode(timing); + + writel(0x1, &disp_ctrl->disp.disp_timing_opt); + + writel(vref_to_sync << 16 | href_to_sync, + &disp_ctrl->disp.ref_to_sync); + + writel(timing->vsync_len.typ << 16 | timing->hsync_len.typ, + &disp_ctrl->disp.sync_width); + + writel(((timing->vback_porch.typ - vref_to_sync) << 16) | + timing->hback_porch.typ, &disp_ctrl->disp.back_porch); + + writel(((timing->vfront_porch.typ + vref_to_sync) << 16) | + timing->hfront_porch.typ, &disp_ctrl->disp.front_porch); + + writel(timing->hactive.typ | (timing->vactive.typ << 16), + &disp_ctrl->disp.disp_active); + + /** + * We want to use PLLD_out0, which is PLLD / 2: + * PixelClock = (PLLD / 2) / ShiftClockDiv / PixelClockDiv. + * + * Currently most panels work inside clock range 50MHz~100MHz, and PLLD + * has some requirements to have VCO in range 500MHz~1000MHz (see + * clock.c for more detail). To simplify calculation, we set + * PixelClockDiv to 1 and ShiftClockDiv to 1. In future these values + * may be calculated by clock_display, to allow wider frequency range. + * + * Note ShiftClockDiv is a 7.1 format value. + */ + const u32 shift_clock_div = 1; + writel((PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT) | + ((shift_clock_div - 1) * 2) << SHIFT_CLK_DIVIDER_SHIFT, + &disp_ctrl->disp.disp_clk_ctrl); + debug("%s: PixelClock=%u, ShiftClockDiv=%u\n", __func__, + timing->pixelclock.typ, shift_clock_div); + return 0; +} + +static int tegra_depth_for_bpp(int bpp) +{ + switch (bpp) { + case 32: + return COLOR_DEPTH_R8G8B8A8; + case 16: + return COLOR_DEPTH_B5G6R5; + default: + debug("Unsupported LCD bit depth"); + return -1; + } +} + +static int update_window(struct dc_ctlr *disp_ctrl, + u32 frame_buffer, int fb_bits_per_pixel, + const struct display_timing *timing) +{ + const u32 colour_white = 0xffffff; + int colour_depth; + u32 val; + + writel(WINDOW_A_SELECT, &disp_ctrl->cmd.disp_win_header); + + writel(((timing->vactive.typ << 16) | timing->hactive.typ), + &disp_ctrl->win.size); + writel(((timing->vactive.typ << 16) | + (timing->hactive.typ * fb_bits_per_pixel / 8)), + &disp_ctrl->win.prescaled_size); + writel(((timing->hactive.typ * fb_bits_per_pixel / 8 + 31) / + 32 * 32), &disp_ctrl->win.line_stride); + + colour_depth = tegra_depth_for_bpp(fb_bits_per_pixel); + if (colour_depth == -1) + return -EINVAL; + + writel(colour_depth, &disp_ctrl->win.color_depth); + + writel(frame_buffer, &disp_ctrl->winbuf.start_addr); + writel(0x1000 << V_DDA_INC_SHIFT | 0x1000 << H_DDA_INC_SHIFT, + &disp_ctrl->win.dda_increment); + + writel(colour_white, &disp_ctrl->disp.blend_background_color); + writel(CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT, + &disp_ctrl->cmd.disp_cmd); + + writel(WRITE_MUX_ACTIVE, &disp_ctrl->cmd.state_access); + + val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; + val |= GENERAL_UPDATE | WIN_A_UPDATE; + writel(val, &disp_ctrl->cmd.state_ctrl); + + /* Enable win_a */ + val = readl(&disp_ctrl->win.win_opt); + writel(val | WIN_ENABLE, &disp_ctrl->win.win_opt); + + return 0; +} + +static int tegra_dc_init(struct dc_ctlr *disp_ctrl) +{ + /* do not accept interrupts during initialization */ + writel(0x00000000, &disp_ctrl->cmd.int_mask); + writel(WRITE_MUX_ASSEMBLY | READ_MUX_ASSEMBLY, + &disp_ctrl->cmd.state_access); + writel(WINDOW_A_SELECT, &disp_ctrl->cmd.disp_win_header); + writel(0x00000000, &disp_ctrl->win.win_opt); + writel(0x00000000, &disp_ctrl->win.byte_swap); + writel(0x00000000, &disp_ctrl->win.buffer_ctrl); + + writel(0x00000000, &disp_ctrl->win.pos); + writel(0x00000000, &disp_ctrl->win.h_initial_dda); + writel(0x00000000, &disp_ctrl->win.v_initial_dda); + writel(0x00000000, &disp_ctrl->win.dda_increment); + writel(0x00000000, &disp_ctrl->win.dv_ctrl); + + writel(0x01000000, &disp_ctrl->win.blend_layer_ctrl); + writel(0x00000000, &disp_ctrl->win.blend_match_select); + writel(0x00000000, &disp_ctrl->win.blend_nomatch_select); + writel(0x00000000, &disp_ctrl->win.blend_alpha_1bit); + + writel(0x00000000, &disp_ctrl->winbuf.start_addr_hi); + writel(0x00000000, &disp_ctrl->winbuf.addr_h_offset); + writel(0x00000000, &disp_ctrl->winbuf.addr_v_offset); + + writel(0x00000000, &disp_ctrl->com.crc_checksum); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[0]); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[1]); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[2]); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[3]); + writel(0x00000000, &disp_ctrl->disp.disp_signal_opt0); + + return 0; +} + +static void dump_config(int panel_bpp, struct display_timing *timing) +{ + printf("timing->hactive.typ = %d\n", timing->hactive.typ); + printf("timing->vactive.typ = %d\n", timing->vactive.typ); + printf("timing->pixelclock.typ = %d\n", timing->pixelclock.typ); + + printf("timing->hfront_porch.typ = %d\n", timing->hfront_porch.typ); + printf("timing->hsync_len.typ = %d\n", timing->hsync_len.typ); + printf("timing->hback_porch.typ = %d\n", timing->hback_porch.typ); + + printf("timing->vfront_porch.typ %d\n", timing->vfront_porch.typ); + printf("timing->vsync_len.typ = %d\n", timing->vsync_len.typ); + printf("timing->vback_porch.typ = %d\n", timing->vback_porch.typ); + + printf("panel_bits_per_pixel = %d\n", panel_bpp); +} + +static int display_update_config_from_edid(struct udevice *dp_dev, + int *panel_bppp, + struct display_timing *timing) +{ + u8 buf[EDID_SIZE]; + int bpc, ret; + + ret = display_port_read_edid(dp_dev, buf, sizeof(buf)); + if (ret < 0) + return ret; + ret = edid_get_timing(buf, ret, timing, &bpc); + if (ret) + return ret; + + /* Use this information if valid */ + if (bpc != -1) + *panel_bppp = bpc * 3; + + return 0; +} + +/* Somewhat torturous method */ +static int get_backlight_info(const void *blob, struct gpio_desc *vdd, + struct gpio_desc *enable, int *pwmp) +{ + int sor, panel, backlight, power; + const u32 *prop; + int len; + int ret; + + *pwmp = 0; + sor = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_SOR); + if (sor < 0) + return -ENOENT; + panel = fdtdec_lookup_phandle(blob, sor, "nvidia,panel"); + if (panel < 0) + return -ENOENT; + backlight = fdtdec_lookup_phandle(blob, panel, "backlight"); + if (backlight < 0) + return -ENOENT; + ret = gpio_request_by_name_nodev(blob, backlight, "enable-gpios", 0, + enable, GPIOD_IS_OUT); + if (ret) + return ret; + prop = fdt_getprop(blob, backlight, "pwms", &len); + if (!prop || len != 3 * sizeof(u32)) + return -EINVAL; + *pwmp = fdt32_to_cpu(prop[1]); + + power = fdtdec_lookup_phandle(blob, backlight, "power-supply"); + if (power < 0) + return -ENOENT; + ret = gpio_request_by_name_nodev(blob, power, "gpio", 0, vdd, + GPIOD_IS_OUT); + if (ret) + goto err; + + return 0; + +err: + dm_gpio_free(NULL, enable); + return ret; +} + +int display_init(void *lcdbase, int fb_bits_per_pixel, + struct display_timing *timing) +{ + struct dc_ctlr *dc_ctlr; + const void *blob = gd->fdt_blob; + struct udevice *dp_dev; + const int href_to_sync = 1, vref_to_sync = 1; + int panel_bpp = 18; /* default 18 bits per pixel */ + u32 plld_rate; + struct gpio_desc vdd_gpio, enable_gpio; + int pwm; + int node; + int ret; + + ret = uclass_get_device(UCLASS_DISPLAY_PORT, 0, &dp_dev); + if (ret) + return ret; + + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_DC); + if (node < 0) + return -ENOENT; + dc_ctlr = (struct dc_ctlr *)fdtdec_get_addr(blob, node, "reg"); + if (fdtdec_decode_display_timing(blob, node, 0, timing)) + return -EINVAL; + + ret = display_update_config_from_edid(dp_dev, &panel_bpp, timing); + if (ret) { + debug("%s: Failed to decode EDID, using defaults\n", __func__); + dump_config(panel_bpp, timing); + } + + if (!get_backlight_info(blob, &vdd_gpio, &enable_gpio, &pwm)) { + dm_gpio_set_value(&vdd_gpio, 1); + debug("%s: backlight vdd setting gpio %08x to %d\n", + __func__, gpio_get_number(&vdd_gpio), 1); + } + + /* + * The plld is programmed with the assumption of the SHIFT_CLK_DIVIDER + * and PIXEL_CLK_DIVIDER are zero (divide by 1). See the + * update_display_mode() for detail. + */ + plld_rate = clock_set_display_rate(timing->pixelclock.typ * 2); + if (plld_rate == 0) { + printf("dc: clock init failed\n"); + return -EIO; + } else if (plld_rate != timing->pixelclock.typ * 2) { + debug("dc: plld rounded to %u\n", plld_rate); + timing->pixelclock.typ = plld_rate / 2; + } + + /* Init dc */ + ret = tegra_dc_init(dc_ctlr); + if (ret) { + debug("dc: init failed\n"); + return ret; + } + + /* Configure dc mode */ + ret = update_display_mode(dc_ctlr, timing, href_to_sync, vref_to_sync); + if (ret) { + debug("dc: failed to configure display mode\n"); + return ret; + } + + /* Enable dp */ + ret = display_port_enable(dp_dev, panel_bpp, timing); + if (ret) + return ret; + + ret = update_window(dc_ctlr, (ulong)lcdbase, fb_bits_per_pixel, timing); + if (ret) + return ret; + + /* Set up Tegra PWM to drive the panel backlight */ + pwm_enable(pwm, 0, 220, 0x2e); + udelay(10 * 1000); + + if (dm_gpio_is_valid(&enable_gpio)) { + dm_gpio_set_value(&enable_gpio, 1); + debug("%s: backlight enable setting gpio %08x to %d\n", + __func__, gpio_get_number(&enable_gpio), 1); + } + + return 0; +} diff --git a/drivers/video/tegra124/tegra124-lcd.c b/drivers/video/tegra124/tegra124-lcd.c new file mode 100644 index 0000000..55f63b1 --- /dev/null +++ b/drivers/video/tegra124/tegra124-lcd.c @@ -0,0 +1,94 @@ +/* + * Copyright 2014 Google Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <errno.h> +#include <fdtdec.h> +#include <lcd.h> +#include <asm/gpio.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/dc.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum { + /* Maximum LCD size we support */ + LCD_MAX_WIDTH = 1920, + LCD_MAX_HEIGHT = 1200, + LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */ +}; + +vidinfo_t panel_info = { + /* Insert a value here so that we don't end up in the BSS */ + .vl_col = -1, +}; + +int tegra_lcd_check_next_stage(const void *blob, int wait) +{ + return 0; +} + +void tegra_lcd_early_init(const void *blob) +{ + /* + * Go with the maximum size for now. We will fix this up after + * relocation. These values are only used for memory alocation. + */ + panel_info.vl_col = LCD_MAX_WIDTH; + panel_info.vl_row = LCD_MAX_HEIGHT; + panel_info.vl_bpix = LCD_MAX_LOG2_BPP; +} + +static int tegra124_lcd_init(void *lcdbase) +{ + struct display_timing timing; + + clock_set_up_plldp(); + clock_adjust_periph_pll_div(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, + 408000000, NULL); + + clock_enable(PERIPH_ID_HOST1X); + clock_enable(PERIPH_ID_DISP1); + clock_enable(PERIPH_ID_PWM); + clock_enable(PERIPH_ID_DPAUX); + clock_enable(PERIPH_ID_SOR0); + + udelay(2); + + reset_set_enable(PERIPH_ID_HOST1X, 0); + reset_set_enable(PERIPH_ID_DISP1, 0); + reset_set_enable(PERIPH_ID_PWM, 0); + reset_set_enable(PERIPH_ID_DPAUX, 0); + reset_set_enable(PERIPH_ID_SOR0, 0); + + display_init(lcdbase, 1 << LCD_BPP, &timing); + + panel_info.vl_col = roundup(timing.hactive.typ, 16); + panel_info.vl_row = timing.vactive.typ; + + lcd_set_flush_dcache(1); + + return 0; +} + +void lcd_ctrl_init(void *lcdbase) +{ + ulong start; + int ret; + + start = get_timer(0); + ret = tegra124_lcd_init(lcdbase); + debug("LCD init took %lu ms\n", get_timer(start)); + if (ret) + printf("%s: Error %d\n", __func__, ret); +} + +void lcd_enable(void) +{ +}

Add full link training as a fallback in case the fast link training fails.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Add full link training support

Changes in v2: - Rebase on top of u-boot-dm

arch/arm/include/asm/arch-tegra/dc.h | 4 + drivers/video/tegra124/display.c | 114 +++++++ drivers/video/tegra124/displayport.h | 228 +++++++++++++ drivers/video/tegra124/dp.c | 615 ++++++++++++++++++++++++++++++++--- drivers/video/tegra124/sor.c | 160 ++++++++- drivers/video/tegra124/sor.h | 18 + include/linux/drm_dp_helper.h | 1 + 7 files changed, 1076 insertions(+), 64 deletions(-)

diff --git a/arch/arm/include/asm/arch-tegra/dc.h b/arch/arm/include/asm/arch-tegra/dc.h index 8803c11..6ffb468 100644 --- a/arch/arm/include/asm/arch-tegra/dc.h +++ b/arch/arm/include/asm/arch-tegra/dc.h @@ -564,6 +564,10 @@ enum { #define V_DDA_INC_SHIFT 16 #define V_DDA_INC_MASK (0xFFFF << V_DDA_INC_SHIFT)

+#define DC_POLL_TIMEOUT_MS 50 +#define DC_N_WINDOWS 5 +#define DC_REG_SAVE_SPACE (DC_N_WINDOWS + 5) + struct display_timing;

int display_init(void *lcdbase, int fb_bits_per_pixel, diff --git a/drivers/video/tegra124/display.c b/drivers/video/tegra124/display.c index 372ad3e..7179dbf 100644 --- a/drivers/video/tegra124/display.c +++ b/drivers/video/tegra124/display.c @@ -95,6 +95,120 @@ static int update_display_mode(struct dc_ctlr *disp_ctrl, return 0; }

+static u32 tegra_dc_poll_register(void *reg, + u32 mask, u32 exp_val, u32 poll_interval_us, u32 timeout_us) +{ + u32 temp = timeout_us; + u32 reg_val = 0; + + do { + udelay(poll_interval_us); + reg_val = readl(reg); + if (timeout_us > poll_interval_us) + timeout_us -= poll_interval_us; + else + break; + } while ((reg_val & mask) != exp_val); + + if ((reg_val & mask) == exp_val) + return 0; /* success */ + + return temp; +} + +int tegra_dc_sor_general_act(struct dc_ctlr *disp_ctrl) +{ + writel(GENERAL_ACT_REQ, &disp_ctrl->cmd.state_ctrl); + + if (tegra_dc_poll_register(&disp_ctrl->cmd.state_ctrl, + GENERAL_ACT_REQ, 0, 100, + DC_POLL_TIMEOUT_MS * 1000)) { + debug("dc timeout waiting for DC to stop\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static struct display_timing min_mode = { + .hsync_len = { .typ = 1 }, + .vsync_len = { .typ = 1 }, + .hback_porch = { .typ = 20 }, + .vback_porch = { .typ = 0 }, + .hactive = { .typ = 16 }, + .vactive = { .typ = 16 }, + .hfront_porch = { .typ = 1 }, + .vfront_porch = { .typ = 2 }, +}; + +/* Disable windows and set minimum raster timings */ +void tegra_dc_sor_disable_win_short_raster(struct dc_ctlr *disp_ctrl, + int *dc_reg_ctx) +{ + const int href_to_sync = 0, vref_to_sync = 1; + int selected_windows, i; + + selected_windows = readl(&disp_ctrl->cmd.disp_win_header); + + /* Store and clear window options */ + for (i = 0; i < DC_N_WINDOWS; ++i) { + writel(WINDOW_A_SELECT << i, &disp_ctrl->cmd.disp_win_header); + dc_reg_ctx[i] = readl(&disp_ctrl->win.win_opt); + writel(0, &disp_ctrl->win.win_opt); + writel(WIN_A_ACT_REQ << i, &disp_ctrl->cmd.state_ctrl); + } + + writel(selected_windows, &disp_ctrl->cmd.disp_win_header); + + /* Store current raster timings and set minimum timings */ + dc_reg_ctx[i++] = readl(&disp_ctrl->disp.ref_to_sync); + writel(href_to_sync | (vref_to_sync << 16), + &disp_ctrl->disp.ref_to_sync); + + dc_reg_ctx[i++] = readl(&disp_ctrl->disp.sync_width); + writel(min_mode.hsync_len.typ | (min_mode.vsync_len.typ << 16), + &disp_ctrl->disp.sync_width); + + dc_reg_ctx[i++] = readl(&disp_ctrl->disp.back_porch); + writel(min_mode.hback_porch.typ | (min_mode.vback_porch.typ << 16), + &disp_ctrl->disp.back_porch); + + dc_reg_ctx[i++] = readl(&disp_ctrl->disp.front_porch); + writel(min_mode.hfront_porch.typ | (min_mode.vfront_porch.typ << 16), + &disp_ctrl->disp.front_porch); + + dc_reg_ctx[i++] = readl(&disp_ctrl->disp.disp_active); + writel(min_mode.hactive.typ | (min_mode.vactive.typ << 16), + &disp_ctrl->disp.disp_active); + + writel(GENERAL_ACT_REQ, &disp_ctrl->cmd.state_ctrl); +} + +/* Restore previous windows status and raster timings */ +void tegra_dc_sor_restore_win_and_raster(struct dc_ctlr *disp_ctrl, + int *dc_reg_ctx) +{ + int selected_windows, i; + + selected_windows = readl(&disp_ctrl->cmd.disp_win_header); + + for (i = 0; i < DC_N_WINDOWS; ++i) { + writel(WINDOW_A_SELECT << i, &disp_ctrl->cmd.disp_win_header); + writel(dc_reg_ctx[i], &disp_ctrl->win.win_opt); + writel(WIN_A_ACT_REQ << i, &disp_ctrl->cmd.state_ctrl); + } + + writel(selected_windows, &disp_ctrl->cmd.disp_win_header); + + writel(dc_reg_ctx[i++], &disp_ctrl->disp.ref_to_sync); + writel(dc_reg_ctx[i++], &disp_ctrl->disp.sync_width); + writel(dc_reg_ctx[i++], &disp_ctrl->disp.back_porch); + writel(dc_reg_ctx[i++], &disp_ctrl->disp.front_porch); + writel(dc_reg_ctx[i++], &disp_ctrl->disp.disp_active); + + writel(GENERAL_UPDATE, &disp_ctrl->cmd.state_ctrl); +} + static int tegra_depth_for_bpp(int bpp) { switch (bpp) { diff --git a/drivers/video/tegra124/displayport.h b/drivers/video/tegra124/displayport.h index c70bbe3..ace6ab0 100644 --- a/drivers/video/tegra124/displayport.h +++ b/drivers/video/tegra124/displayport.h @@ -128,6 +128,183 @@ struct dpaux_ctlr { #define DP_AUX_TIMEOUT_MS 40 #define DP_DPCP_RETRY_SLEEP_NS 400

+static const u32 tegra_dp_vs_regs[][4][4] = { + /* postcursor2 L0 */ + { + /* pre-emphasis: L0, L1, L2, L3 */ + {0x13, 0x19, 0x1e, 0x28}, /* voltage swing: L0 */ + {0x1e, 0x25, 0x2d}, /* L1 */ + {0x28, 0x32}, /* L2 */ + {0x3c}, /* L3 */ + }, + + /* postcursor2 L1 */ + { + {0x12, 0x17, 0x1b, 0x25}, + {0x1c, 0x23, 0x2a}, + {0x25, 0x2f}, + {0x39}, + }, + + /* postcursor2 L2 */ + { + {0x12, 0x16, 0x1a, 0x22}, + {0x1b, 0x20, 0x27}, + {0x24, 0x2d}, + {0x36}, + }, + + /* postcursor2 L3 */ + { + {0x11, 0x14, 0x17, 0x1f}, + {0x19, 0x1e, 0x24}, + {0x22, 0x2a}, + {0x32}, + }, +}; + +static const u32 tegra_dp_pe_regs[][4][4] = { + /* postcursor2 L0 */ + { + /* pre-emphasis: L0, L1, L2, L3 */ + {0x00, 0x09, 0x13, 0x25}, /* voltage swing: L0 */ + {0x00, 0x0f, 0x1e}, /* L1 */ + {0x00, 0x14}, /* L2 */ + {0x00}, /* L3 */ + }, + + /* postcursor2 L1 */ + { + {0x00, 0x0a, 0x14, 0x28}, + {0x00, 0x0f, 0x1e}, + {0x00, 0x14}, + {0x00}, + }, + + /* postcursor2 L2 */ + { + {0x00, 0x0a, 0x14, 0x28}, + {0x00, 0x0f, 0x1e}, + {0x00, 0x14}, + {0x00}, + }, + + /* postcursor2 L3 */ + { + {0x00, 0x0a, 0x14, 0x28}, + {0x00, 0x0f, 0x1e}, + {0x00, 0x14}, + {0x00}, + }, +}; + +static const u32 tegra_dp_pc_regs[][4][4] = { + /* postcursor2 L0 */ + { + /* pre-emphasis: L0, L1, L2, L3 */ + {0x00, 0x00, 0x00, 0x00}, /* voltage swing: L0 */ + {0x00, 0x00, 0x00}, /* L1 */ + {0x00, 0x00}, /* L2 */ + {0x00}, /* L3 */ + }, + + /* postcursor2 L1 */ + { + {0x02, 0x02, 0x04, 0x05}, + {0x02, 0x04, 0x05}, + {0x04, 0x05}, + {0x05}, + }, + + /* postcursor2 L2 */ + { + {0x04, 0x05, 0x08, 0x0b}, + {0x05, 0x09, 0x0b}, + {0x08, 0x0a}, + {0x0b}, + }, + + /* postcursor2 L3 */ + { + {0x05, 0x09, 0x0b, 0x12}, + {0x09, 0x0d, 0x12}, + {0x0b, 0x0f}, + {0x12}, + }, +}; + +static const u32 tegra_dp_tx_pu[][4][4] = { + /* postcursor2 L0 */ + { + /* pre-emphasis: L0, L1, L2, L3 */ + {0x20, 0x30, 0x40, 0x60}, /* voltage swing: L0 */ + {0x30, 0x40, 0x60}, /* L1 */ + {0x40, 0x60}, /* L2 */ + {0x60}, /* L3 */ + }, + + /* postcursor2 L1 */ + { + {0x20, 0x20, 0x30, 0x50}, + {0x30, 0x40, 0x50}, + {0x40, 0x50}, + {0x60}, + }, + + /* postcursor2 L2 */ + { + {0x20, 0x20, 0x30, 0x40}, + {0x30, 0x30, 0x40}, + {0x40, 0x50}, + {0x60}, + }, + + /* postcursor2 L3 */ + { + {0x20, 0x20, 0x20, 0x40}, + {0x30, 0x30, 0x40}, + {0x40, 0x40}, + {0x60}, + }, +}; + +enum { + DRIVECURRENT_LEVEL0 = 0, + DRIVECURRENT_LEVEL1 = 1, + DRIVECURRENT_LEVEL2 = 2, + DRIVECURRENT_LEVEL3 = 3, +}; + +enum { + PREEMPHASIS_DISABLED = 0, + PREEMPHASIS_LEVEL1 = 1, + PREEMPHASIS_LEVEL2 = 2, + PREEMPHASIS_LEVEL3 = 3, +}; + +enum { + POSTCURSOR2_LEVEL0 = 0, + POSTCURSOR2_LEVEL1 = 1, + POSTCURSOR2_LEVEL2 = 2, + POSTCURSOR2_LEVEL3 = 3, + POSTCURSOR2_SUPPORTED +}; + +static inline int tegra_dp_is_max_vs(u32 pe, u32 vs) +{ + return (vs < (DRIVECURRENT_LEVEL3 - pe)) ? 0 : 1; +} + +static inline int tegra_dp_is_max_pe(u32 pe, u32 vs) +{ + return (pe < (PREEMPHASIS_LEVEL3 - vs)) ? 0 : 1; +} + +static inline int tegra_dp_is_max_pc(u32 pc) +{ + return (pc < POSTCURSOR2_LEVEL3) ? 0 : 1; +} + /* DPCD definitions which are not defined in drm_dp_helper.h */ #define DP_DPCD_REV_MAJOR_SHIFT 4 #define DP_DPCD_REV_MAJOR_MASK (0xf << 4) @@ -141,8 +318,16 @@ struct dpaux_ctlr { #define DP_MAX_LANE_COUNT_LANE_1 0x1 #define DP_MAX_LANE_COUNT_LANE_2 0x2 #define DP_MAX_LANE_COUNT_LANE_4 0x4 +#define DP_MAX_LANE_COUNT_TPS3_SUPPORTED_YES (1 << 6) #define DP_MAX_LANE_COUNT_ENHANCED_FRAMING_YES (1 << 7)

+#define NV_DPCD_TRAINING_LANEX_SET_DC_SHIFT 0 +#define NV_DPCD_TRAINING_LANEX_SET_DC_MAX_REACHED_T (0x00000001 << 2) +#define NV_DPCD_TRAINING_LANEX_SET_DC_MAX_REACHED_F (0x00000000 << 2) +#define NV_DPCD_TRAINING_LANEX_SET_PE_SHIFT 3 +#define NV_DPCD_TRAINING_LANEX_SET_PE_MAX_REACHED_T (0x00000001 << 5) +#define NV_DPCD_TRAINING_LANEX_SET_PE_MAX_REACHED_F (0x00000000 << 5) + #define DP_MAX_DOWNSPREAD_VAL_NONE 0 #define DP_MAX_DOWNSPREAD_VAL_0_5_PCT 1 #define DP_MAX_DOWNSPREAD_NO_AUX_HANDSHAKE_LT_T (1 << 6) @@ -153,6 +338,8 @@ struct dpaux_ctlr { #define DP_LANE_COUNT_SET_ENHANCEDFRAMING_T (1 << 7)

#define DP_TRAINING_PATTERN_SET_SC_DISABLED_T (1 << 5) +#define NV_DPCD_TRAINING_PATTERN_SET_SC_DISABLED_F (0x00000000 << 5) +#define NV_DPCD_TRAINING_PATTERN_SET_SC_DISABLED_T (0x00000001 << 5)

#define DP_MAIN_LINK_CHANNEL_CODING_SET_ASC_RESET_DISABLE 0 #define DP_MAIN_LINK_CHANNEL_CODING_SET_ASC_RESET_ENABLE 1 @@ -160,7 +347,11 @@ struct dpaux_ctlr { #define NV_DPCD_TRAINING_LANE0_1_SET2 0x10f #define NV_DPCD_TRAINING_LANE2_3_SET2 0x110 #define NV_DPCD_LANEX_SET2_PC2_MAX_REACHED_T (1 << 2) +#define NV_DPCD_LANEX_SET2_PC2_MAX_REACHED_F (0 << 2) #define NV_DPCD_LANEXPLUS1_SET2_PC2_MAX_REACHED_T (1 << 6) +#define NV_DPCD_LANEXPLUS1_SET2_PC2_MAX_REACHED_F (0 << 6) +#define NV_DPCD_LANEX_SET2_PC2_SHIFT 0 +#define NV_DPCD_LANEXPLUS1_SET2_PC2_SHIFT 4

#define NV_DPCD_STATUS_LANEX_CR_DONE_SHIFT 0 #define NV_DPCD_STATUS_LANEX_CR_DONE_NO (0x00000000) @@ -181,4 +372,41 @@ struct dpaux_ctlr { #define NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_NO (0x00000000 << 6) #define NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_YES (0x00000001 << 6)

+#define NV_DPCD_LANE_ALIGN_STATUS_UPDATED (0x00000204) +#define NV_DPCD_LANE_ALIGN_STATUS_UPDATED_DONE_NO (0x00000000) +#define NV_DPCD_LANE_ALIGN_STATUS_UPDATED_DONE_YES (0x00000001) + +#define NV_DPCD_STATUS_LANEX_CR_DONE_SHIFT 0 +#define NV_DPCD_STATUS_LANEX_CR_DONE_NO (0x00000000) +#define NV_DPCD_STATUS_LANEX_CR_DONE_YES (0x00000001) +#define NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_SHIFT 1 +#define NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_NO (0x00000000 << 1) +#define NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_YES (0x00000001 << 1) +#define NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_SHFIT 2 +#define NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_NO (0x00000000 << 2) +#define NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_YES (0x00000001 << 2) +#define NV_DPCD_STATUS_LANEXPLUS1_CR_DONE_SHIFT 4 +#define NV_DPCD_STATUS_LANEXPLUS1_CR_DONE_NO (0x00000000 << 4) +#define NV_DPCD_STATUS_LANEXPLUS1_CR_DONE_YES (0x00000001 << 4) +#define NV_DPCD_STATUS_LANEXPLUS1_CHN_EQ_DONE_SHIFT 5 +#define NV_DPCD_STATUS_LANEXPLUS1_CHN_EQ_DONE_NO (0x00000000 << 5) +#define NV_DPCD_STATUS_LANEXPLUS1_CHN_EQ_DONE_YES (0x00000001 << 5) +#define NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_SHIFT 6 +#define NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_NO (0x00000000 << 6) +#define NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_YES (0x00000001 << 6) + +#define NV_DPCD_ADJUST_REQ_LANEX_DC_SHIFT 0 +#define NV_DPCD_ADJUST_REQ_LANEX_DC_MASK 0x3 +#define NV_DPCD_ADJUST_REQ_LANEX_PE_SHIFT 2 +#define NV_DPCD_ADJUST_REQ_LANEX_PE_MASK (0x3 << 2) +#define NV_DPCD_ADJUST_REQ_LANEXPLUS1_DC_SHIFT 4 +#define NV_DPCD_ADJUST_REQ_LANEXPLUS1_DC_MASK (0x3 << 4) +#define NV_DPCD_ADJUST_REQ_LANEXPLUS1_PE_SHIFT 6 +#define NV_DPCD_ADJUST_REQ_LANEXPLUS1_PE_MASK (0x3 << 6) +#define NV_DPCD_ADJUST_REQ_POST_CURSOR2 (0x0000020C) +#define NV_DPCD_ADJUST_REQ_POST_CURSOR2_LANE_MASK 0x3 +#define NV_DPCD_ADJUST_REQ_POST_CURSOR2_LANE_SHIFT(i) (i*2) + +#define NV_DPCD_TRAINING_AUX_RD_INTERVAL (0x0000000E) +#define NV_DPCD_TRAINING_LANEX_SET_DC_MAX_REACHED_F (0x00000000 << 2) #endif diff --git a/drivers/video/tegra124/dp.c b/drivers/video/tegra124/dp.c index a5a59d6..05624dc 100644 --- a/drivers/video/tegra124/dp.c +++ b/drivers/video/tegra124/dp.c @@ -19,6 +19,8 @@

DECLARE_GLOBAL_DATA_PTR;

+#define DO_FAST_LINK_TRAINING 1 + struct tegra_dp_plat { ulong base; }; @@ -440,6 +442,34 @@ static void tegra_dc_dp_dump_link_cfg(struct tegra_dp_priv *dp, } #endif

+static int _tegra_dp_lower_link_config(struct tegra_dp_priv *dp, + struct tegra_dp_link_config *cfg) +{ + switch (cfg->link_bw) { + case SOR_LINK_SPEED_G1_62: + if (cfg->max_link_bw > SOR_LINK_SPEED_G1_62) + cfg->link_bw = SOR_LINK_SPEED_G2_7; + cfg->lane_count /= 2; + break; + case SOR_LINK_SPEED_G2_7: + cfg->link_bw = SOR_LINK_SPEED_G1_62; + break; + case SOR_LINK_SPEED_G5_4: + if (cfg->lane_count == 1) { + cfg->link_bw = SOR_LINK_SPEED_G2_7; + cfg->lane_count = cfg->max_lane_count; + } else { + cfg->lane_count /= 2; + } + break; + default: + debug("dp: Error link rate %d\n", cfg->link_bw); + return -ENOLINK; + } + + return (cfg->lane_count > 0) ? 0 : -ENOLINK; +} + /* * Calcuate if given cfg can meet the mode request. * Return 0 if mode is possible, -1 otherwise @@ -629,6 +659,8 @@ static int tegra_dc_dp_init_max_link_cfg( if (ret) return ret; link_cfg->max_lane_count = dpcd_data & DP_MAX_LANE_COUNT_MASK; + link_cfg->tps3_supported = (dpcd_data & + DP_MAX_LANE_COUNT_TPS3_SUPPORTED_YES) ? 1 : 0;

link_cfg->support_enhanced_framing = (dpcd_data & DP_MAX_LANE_COUNT_ENHANCED_FRAMING_YES) ? @@ -640,6 +672,10 @@ static int tegra_dc_dp_init_max_link_cfg( link_cfg->downspread = (dpcd_data & DP_MAX_DOWNSPREAD_VAL_0_5_PCT) ? 1 : 0;

+ ret = tegra_dc_dp_dpcd_read(dp, NV_DPCD_TRAINING_AUX_RD_INTERVAL, + &link_cfg->aux_rd_interval); + if (ret) + return ret; ret = tegra_dc_dp_dpcd_read(dp, DP_MAX_LINK_RATE, &link_cfg->max_link_bw); if (ret) @@ -667,6 +703,7 @@ static int tegra_dc_dp_init_max_link_cfg( link_cfg->lane_count = link_cfg->max_lane_count; link_cfg->link_bw = link_cfg->max_link_bw; link_cfg->enhanced_framing = link_cfg->support_enhanced_framing; + link_cfg->frame_in_ms = (1000 / 60) + 1;

tegra_dc_dp_calc_config(dp, timing, link_cfg); return 0; @@ -749,6 +786,442 @@ static int tegra_dc_dp_link_trained(struct tegra_dp_priv *dp, return 0; }

+static int tegra_dp_channel_eq_status(struct tegra_dp_priv *dp, + const struct tegra_dp_link_config *cfg) +{ + u32 cnt; + u32 n_lanes = cfg->lane_count; + u8 data; + u8 ce_done = 1; + int ret; + + for (cnt = 0; cnt < n_lanes / 2; cnt++) { + ret = tegra_dc_dp_dpcd_read(dp, DP_LANE0_1_STATUS + cnt, &data); + if (ret) + return ret; + + if (n_lanes == 1) { + ce_done = (data & (0x1 << + NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_SHIFT)) && + (data & (0x1 << + NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_SHFIT)); + break; + } else if (!(data & (0x1 << + NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_SHIFT)) || + !(data & (0x1 << + NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_SHFIT)) || + !(data & (0x1 << + NV_DPCD_STATUS_LANEXPLUS1_CHN_EQ_DONE_SHIFT)) || + !(data & (0x1 << + NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_SHIFT))) + return -EIO; + } + + if (ce_done) { + ret = tegra_dc_dp_dpcd_read(dp, + DP_LANE_ALIGN_STATUS_UPDATED, + &data); + if (ret) + return ret; + if (!(data & NV_DPCD_LANE_ALIGN_STATUS_UPDATED_DONE_YES)) + ce_done = 0; + } + + return ce_done ? 0 : -EIO; +} + +static int tegra_dp_clock_recovery_status(struct tegra_dp_priv *dp, + const struct tegra_dp_link_config *cfg) +{ + u32 cnt; + u32 n_lanes = cfg->lane_count; + u8 data_ptr; + int ret; + + for (cnt = 0; cnt < n_lanes / 2; cnt++) { + ret = tegra_dc_dp_dpcd_read(dp, (DP_LANE0_1_STATUS + cnt), + &data_ptr); + if (ret) + return ret; + + if (n_lanes == 1) + return (data_ptr & NV_DPCD_STATUS_LANEX_CR_DONE_YES) ? + 1 : 0; + else if (!(data_ptr & NV_DPCD_STATUS_LANEX_CR_DONE_YES) || + !(data_ptr & (NV_DPCD_STATUS_LANEXPLUS1_CR_DONE_YES))) + return 0; + } + + return 1; +} + +static int tegra_dp_lt_adjust(struct tegra_dp_priv *dp, u32 pe[4], u32 vs[4], + u32 pc[4], u8 pc_supported, + const struct tegra_dp_link_config *cfg) +{ + size_t cnt; + u8 data_ptr; + u32 n_lanes = cfg->lane_count; + int ret; + + for (cnt = 0; cnt < n_lanes / 2; cnt++) { + ret = tegra_dc_dp_dpcd_read(dp, DP_ADJUST_REQUEST_LANE0_1 + cnt, + &data_ptr); + if (ret) + return ret; + pe[2 * cnt] = (data_ptr & NV_DPCD_ADJUST_REQ_LANEX_PE_MASK) >> + NV_DPCD_ADJUST_REQ_LANEX_PE_SHIFT; + vs[2 * cnt] = (data_ptr & NV_DPCD_ADJUST_REQ_LANEX_DC_MASK) >> + NV_DPCD_ADJUST_REQ_LANEX_DC_SHIFT; + pe[1 + 2 * cnt] = + (data_ptr & NV_DPCD_ADJUST_REQ_LANEXPLUS1_PE_MASK) >> + NV_DPCD_ADJUST_REQ_LANEXPLUS1_PE_SHIFT; + vs[1 + 2 * cnt] = + (data_ptr & NV_DPCD_ADJUST_REQ_LANEXPLUS1_DC_MASK) >> + NV_DPCD_ADJUST_REQ_LANEXPLUS1_DC_SHIFT; + } + if (pc_supported) { + ret = tegra_dc_dp_dpcd_read(dp, NV_DPCD_ADJUST_REQ_POST_CURSOR2, + &data_ptr); + if (ret) + return ret; + for (cnt = 0; cnt < n_lanes; cnt++) { + pc[cnt] = (data_ptr >> + NV_DPCD_ADJUST_REQ_POST_CURSOR2_LANE_SHIFT(cnt)) & + NV_DPCD_ADJUST_REQ_POST_CURSOR2_LANE_MASK; + } + } + + return 0; +} + +static void tegra_dp_wait_aux_training(struct tegra_dp_priv *dp, + bool is_clk_recovery, + const struct tegra_dp_link_config *cfg) +{ + if (!cfg->aux_rd_interval) + udelay(is_clk_recovery ? 200 : 500); + else + mdelay(cfg->aux_rd_interval * 4); +} + +static void tegra_dp_tpg(struct tegra_dp_priv *dp, u32 tp, u32 n_lanes, + const struct tegra_dp_link_config *cfg) +{ + u8 data = (tp == training_pattern_disabled) + ? (tp | NV_DPCD_TRAINING_PATTERN_SET_SC_DISABLED_F) + : (tp | NV_DPCD_TRAINING_PATTERN_SET_SC_DISABLED_T); + + tegra_dc_sor_set_dp_linkctl(dp->sor, 1, tp, cfg); + tegra_dc_dp_dpcd_write(dp, DP_TRAINING_PATTERN_SET, data); +} + +static int tegra_dp_link_config(struct tegra_dp_priv *dp, + const struct tegra_dp_link_config *link_cfg) +{ + u8 dpcd_data; + u32 retry; + int ret; + + if (link_cfg->lane_count == 0) { + debug("dp: error: lane count is 0. Can not set link config.\n"); + return -ENOLINK; + } + + /* Set power state if it is not in normal level */ + ret = tegra_dc_dp_dpcd_read(dp, DP_SET_POWER, &dpcd_data); + if (ret) + return ret; + + if (dpcd_data == DP_SET_POWER_D3) { + dpcd_data = DP_SET_POWER_D0; + + /* DP spec requires 3 retries */ + for (retry = 3; retry > 0; --retry) { + ret = tegra_dc_dp_dpcd_write(dp, DP_SET_POWER, + dpcd_data); + if (!ret) + break; + if (retry == 1) { + debug("dp: Failed to set DP panel power\n"); + return ret; + } + } + } + + /* Enable ASSR if possible */ + if (link_cfg->alt_scramber_reset_cap) { + ret = tegra_dc_dp_set_assr(dp, dp->sor, 1); + if (ret) + return ret; + } + + ret = tegra_dp_set_link_bandwidth(dp, dp->sor, link_cfg->link_bw); + if (ret) { + debug("dp: Failed to set link bandwidth\n"); + return ret; + } + ret = tegra_dp_set_lane_count(dp, link_cfg, dp->sor); + if (ret) { + debug("dp: Failed to set lane count\n"); + return ret; + } + tegra_dc_sor_set_dp_linkctl(dp->sor, 1, training_pattern_none, + link_cfg); + + return 0; +} + +static int tegra_dp_lower_link_config(struct tegra_dp_priv *dp, + const struct display_timing *timing, + struct tegra_dp_link_config *cfg) +{ + struct tegra_dp_link_config tmp_cfg; + int ret; + + tmp_cfg = *cfg; + cfg->is_valid = 0; + + ret = _tegra_dp_lower_link_config(dp, cfg); + if (!ret) + ret = tegra_dc_dp_calc_config(dp, timing, cfg); + if (!ret) + ret = tegra_dp_link_config(dp, cfg); + if (ret) + goto fail; + + return 0; + +fail: + *cfg = tmp_cfg; + tegra_dp_link_config(dp, &tmp_cfg); + return ret; +} + +static int tegra_dp_lt_config(struct tegra_dp_priv *dp, u32 pe[4], u32 vs[4], + u32 pc[4], const struct tegra_dp_link_config *cfg) +{ + struct tegra_dc_sor_data *sor = dp->sor; + u32 n_lanes = cfg->lane_count; + u8 pc_supported = cfg->tps3_supported; + u32 cnt; + u32 val; + + for (cnt = 0; cnt < n_lanes; cnt++) { + u32 mask = 0; + u32 pe_reg, vs_reg, pc_reg; + u32 shift = 0; + + switch (cnt) { + case 0: + mask = PR_LANE2_DP_LANE0_MASK; + shift = PR_LANE2_DP_LANE0_SHIFT; + break; + case 1: + mask = PR_LANE1_DP_LANE1_MASK; + shift = PR_LANE1_DP_LANE1_SHIFT; + break; + case 2: + mask = PR_LANE0_DP_LANE2_MASK; + shift = PR_LANE0_DP_LANE2_SHIFT; + break; + case 3: + mask = PR_LANE3_DP_LANE3_MASK; + shift = PR_LANE3_DP_LANE3_SHIFT; + break; + default: + debug("dp: incorrect lane cnt\n"); + return -EINVAL; + } + + pe_reg = tegra_dp_pe_regs[pc[cnt]][vs[cnt]][pe[cnt]]; + vs_reg = tegra_dp_vs_regs[pc[cnt]][vs[cnt]][pe[cnt]]; + pc_reg = tegra_dp_pc_regs[pc[cnt]][vs[cnt]][pe[cnt]]; + + tegra_dp_set_pe_vs_pc(sor, mask, pe_reg << shift, + vs_reg << shift, pc_reg << shift, + pc_supported); + } + + tegra_dp_disable_tx_pu(dp->sor); + udelay(20); + + for (cnt = 0; cnt < n_lanes; cnt++) { + u32 max_vs_flag = tegra_dp_is_max_vs(pe[cnt], vs[cnt]); + u32 max_pe_flag = tegra_dp_is_max_pe(pe[cnt], vs[cnt]); + + val = (vs[cnt] << NV_DPCD_TRAINING_LANEX_SET_DC_SHIFT) | + (max_vs_flag ? + NV_DPCD_TRAINING_LANEX_SET_DC_MAX_REACHED_T : + NV_DPCD_TRAINING_LANEX_SET_DC_MAX_REACHED_F) | + (pe[cnt] << NV_DPCD_TRAINING_LANEX_SET_PE_SHIFT) | + (max_pe_flag ? + NV_DPCD_TRAINING_LANEX_SET_PE_MAX_REACHED_T : + NV_DPCD_TRAINING_LANEX_SET_PE_MAX_REACHED_F); + tegra_dc_dp_dpcd_write(dp, (DP_TRAINING_LANE0_SET + cnt), val); + } + + if (pc_supported) { + for (cnt = 0; cnt < n_lanes / 2; cnt++) { + u32 max_pc_flag0 = tegra_dp_is_max_pc(pc[cnt]); + u32 max_pc_flag1 = tegra_dp_is_max_pc(pc[cnt + 1]); + val = (pc[cnt] << NV_DPCD_LANEX_SET2_PC2_SHIFT) | + (max_pc_flag0 ? + NV_DPCD_LANEX_SET2_PC2_MAX_REACHED_T : + NV_DPCD_LANEX_SET2_PC2_MAX_REACHED_F) | + (pc[cnt + 1] << + NV_DPCD_LANEXPLUS1_SET2_PC2_SHIFT) | + (max_pc_flag1 ? + NV_DPCD_LANEXPLUS1_SET2_PC2_MAX_REACHED_T : + NV_DPCD_LANEXPLUS1_SET2_PC2_MAX_REACHED_F); + tegra_dc_dp_dpcd_write(dp, + NV_DPCD_TRAINING_LANE0_1_SET2 + + cnt, val); + } + } + + return 0; +} + +static int _tegra_dp_channel_eq(struct tegra_dp_priv *dp, u32 pe[4], + u32 vs[4], u32 pc[4], u8 pc_supported, + u32 n_lanes, + const struct tegra_dp_link_config *cfg) +{ + u32 retry_cnt; + + for (retry_cnt = 0; retry_cnt < 4; retry_cnt++) { + int ret; + + if (retry_cnt) { + ret = tegra_dp_lt_adjust(dp, pe, vs, pc, pc_supported, + cfg); + if (ret) + return ret; + tegra_dp_lt_config(dp, pe, vs, pc, cfg); + } + + tegra_dp_wait_aux_training(dp, false, cfg); + + if (!tegra_dp_clock_recovery_status(dp, cfg)) { + debug("dp: CR failed in channel EQ sequence!\n"); + break; + } + + if (!tegra_dp_channel_eq_status(dp, cfg)) + return 0; + } + + return -EIO; +} + +static int tegra_dp_channel_eq(struct tegra_dp_priv *dp, u32 pe[4], u32 vs[4], + u32 pc[4], + const struct tegra_dp_link_config *cfg) +{ + u32 n_lanes = cfg->lane_count; + u8 pc_supported = cfg->tps3_supported; + int ret; + u32 tp_src = training_pattern_2; + + if (pc_supported) + tp_src = training_pattern_3; + + tegra_dp_tpg(dp, tp_src, n_lanes, cfg); + + ret = _tegra_dp_channel_eq(dp, pe, vs, pc, pc_supported, n_lanes, cfg); + + tegra_dp_tpg(dp, training_pattern_disabled, n_lanes, cfg); + + return ret; +} + +static int _tegra_dp_clk_recovery(struct tegra_dp_priv *dp, u32 pe[4], + u32 vs[4], u32 pc[4], u8 pc_supported, + u32 n_lanes, + const struct tegra_dp_link_config *cfg) +{ + u32 vs_temp[4]; + u32 retry_cnt = 0; + + do { + tegra_dp_lt_config(dp, pe, vs, pc, cfg); + tegra_dp_wait_aux_training(dp, true, cfg); + + if (tegra_dp_clock_recovery_status(dp, cfg)) + return 0; + + memcpy(vs_temp, vs, sizeof(vs_temp)); + tegra_dp_lt_adjust(dp, pe, vs, pc, pc_supported, cfg); + + if (memcmp(vs_temp, vs, sizeof(vs_temp))) + retry_cnt = 0; + else + ++retry_cnt; + } while (retry_cnt < 5); + + return -EIO; +} + +static int tegra_dp_clk_recovery(struct tegra_dp_priv *dp, u32 pe[4], + u32 vs[4], u32 pc[4], + const struct tegra_dp_link_config *cfg) +{ + u32 n_lanes = cfg->lane_count; + u8 pc_supported = cfg->tps3_supported; + int err; + + tegra_dp_tpg(dp, training_pattern_1, n_lanes, cfg); + + err = _tegra_dp_clk_recovery(dp, pe, vs, pc, pc_supported, n_lanes, + cfg); + if (err < 0) + tegra_dp_tpg(dp, training_pattern_disabled, n_lanes, cfg); + + return err; +} + +static int tegra_dc_dp_full_link_training(struct tegra_dp_priv *dp, + const struct display_timing *timing, + struct tegra_dp_link_config *cfg) +{ + struct tegra_dc_sor_data *sor = dp->sor; + int err; + u32 pe[4], vs[4], pc[4]; + + tegra_sor_precharge_lanes(sor, cfg); + +retry_cr: + memset(pe, PREEMPHASIS_DISABLED, sizeof(pe)); + memset(vs, DRIVECURRENT_LEVEL0, sizeof(vs)); + memset(pc, POSTCURSOR2_LEVEL0, sizeof(pc)); + + err = tegra_dp_clk_recovery(dp, pe, vs, pc, cfg); + if (err) { + if (!tegra_dp_lower_link_config(dp, timing, cfg)) + goto retry_cr; + + debug("dp: clk recovery failed\n"); + goto fail; + } + + err = tegra_dp_channel_eq(dp, pe, vs, pc, cfg); + if (err) { + if (!tegra_dp_lower_link_config(dp, timing, cfg)) + goto retry_cr; + + debug("dp: channel equalization failed\n"); + goto fail; + } +#ifdef DEBUG + tegra_dc_dp_dump_link_cfg(dp, cfg); +#endif + return 0; + +fail: + return err; +} + /* * All link training functions are ported from kernel dc driver. * See more details at drivers/video/tegra/dc/dp.c @@ -824,62 +1297,38 @@ static int tegra_dc_dp_fast_link_training(struct tegra_dp_priv *dp, return 0; }

-static int tegra_dp_link_config(struct tegra_dp_priv *dp, - const struct tegra_dp_link_config *link_cfg, - struct tegra_dc_sor_data *sor) +static int tegra_dp_do_link_training(struct tegra_dp_priv *dp, + struct tegra_dp_link_config *link_cfg, + const struct display_timing *timing, + struct tegra_dc_sor_data *sor) { - u8 dpcd_data; u8 link_bw; u8 lane_count; - u32 retry; int ret;

- if (link_cfg->lane_count == 0) { - debug("dp: error: lane count is 0. Can not set link config.\n"); - return -1; - } - - /* Set power state if it is not in normal level */ - ret = tegra_dc_dp_dpcd_read(dp, DP_SET_POWER, &dpcd_data); - if (ret) - return ret; - if (dpcd_data == DP_SET_POWER_D3) { - dpcd_data = DP_SET_POWER_D0; - retry = 3; /* DP spec requires 3 retries */ - do { - ret = tegra_dc_dp_dpcd_write(dp, - DP_SET_POWER, dpcd_data); - } while ((--retry > 0) && ret); + if (DO_FAST_LINK_TRAINING) { + ret = tegra_dc_dp_fast_link_training(dp, link_cfg, sor); if (ret) { - debug("dp: Failed to set DP panel power\n"); - return ret; + debug("dp: fast link training failed\n"); + } else { + /* + * set to a known-good drive setting if fast link + * succeeded. Ignore any error. + */ + ret = tegra_dc_sor_set_voltage_swing(dp->sor, link_cfg); + if (ret) + debug("Failed to set voltage swing\n"); } + } else { + ret = -ENOSYS; } - - /* Enable ASSR if possible */ - if (link_cfg->alt_scramber_reset_cap) { - ret = tegra_dc_dp_set_assr(dp, sor, 1); - if (ret) - return ret; - } - - ret = tegra_dp_set_link_bandwidth(dp, sor, link_cfg->link_bw); - if (ret) { - debug("dp: Failed to set link bandwidth\n"); - return ret; - } - ret = tegra_dp_set_lane_count(dp, link_cfg, sor); - if (ret) { - debug("dp: Failed to set lane count\n"); - return ret; - } - tegra_dc_sor_set_dp_linkctl(sor, 1, training_pattern_none, link_cfg); - - /* Now do the fast link training for eDP */ - ret = tegra_dc_dp_fast_link_training(dp, link_cfg, sor); if (ret) { - debug("dp: fast link training failed\n"); - return ret; + /* Try full link training then */ + ret = tegra_dc_dp_full_link_training(dp, timing, link_cfg); + if (ret) { + debug("dp: full link training failed\n"); + return ret; + } }

/* Everything is good; double check the link config */ @@ -920,7 +1369,8 @@ static int tegra_dc_dp_explore_link_cfg(struct tegra_dp_priv *dp, * set to max link config */ if ((!tegra_dc_dp_calc_config(dp, timing, &temp_cfg)) && - (!(tegra_dp_link_config(dp, &temp_cfg, sor)))) + (!tegra_dp_link_config(dp, &temp_cfg)) && + (!tegra_dp_do_link_training(dp, &temp_cfg, timing, sor))) /* the max link cfg is doable */ memcpy(link_cfg, &temp_cfg, sizeof(temp_cfg));

@@ -944,6 +1394,69 @@ static int tegra_dp_hpd_plug(struct tegra_dp_priv *dp) return -EIO; }

+static int tegra_dc_dp_sink_out_of_sync(struct tegra_dp_priv *dp, u32 delay_ms) +{ + u8 dpcd_data; + int out_of_sync; + int ret; + + debug("%s: delay=%d\n", __func__, delay_ms); + mdelay(delay_ms); + ret = tegra_dc_dp_dpcd_read(dp, DP_SINK_STATUS, &dpcd_data); + if (ret) + return ret; + + out_of_sync = !(dpcd_data & DP_SINK_STATUS_PORT0_IN_SYNC); + if (out_of_sync) + debug("SINK receive port 0 out of sync, data=%x\n", dpcd_data); + else + debug("SINK is in synchronization\n"); + + return out_of_sync; +} + +static int tegra_dc_dp_check_sink(struct tegra_dp_priv *dp, + struct tegra_dp_link_config *link_cfg, + const struct display_timing *timing) +{ + u8 max_retry = 3; + int delay_frame; + + /* + * DP TCON may skip some main stream frames, thus we need to wait + * some delay before reading the DPCD SINK STATUS register, starting + * from 5 + */ + delay_frame = 5; + + do { + int ret; + + if (!tegra_dc_dp_sink_out_of_sync(dp, link_cfg->frame_in_ms * + delay_frame)) + return 0; + + debug("%s: retries left %d\n", __func__, max_retry); + if (!max_retry--) + return -EIO; + ret = tegra_dc_sor_detach(dp->sor); + if (ret) + return ret; + if (tegra_dc_dp_explore_link_cfg(dp, link_cfg, dp->sor, + timing)) { + debug("dp: %s: error to configure link\n", __func__); + continue; + } + + tegra_dc_sor_set_power_state(dp->sor, 1); + tegra_dc_sor_attach(dp->sor, link_cfg, timing); + + /* Increase delay_frame for next try in case the sink is + skipping more frames */ + delay_frame += 10; + } while (1); +} + int tegra_dp_enable(struct udevice *dev, int panel_bpp, const struct display_timing *timing) { @@ -1017,6 +1530,12 @@ int tegra_dp_enable(struct udevice *dev, int panel_bpp, if (ret && ret != -EEXIST) return ret;

+ if (0) { + ret = tegra_dc_dp_check_sink(priv, link_cfg, timing); + if (ret) + return ret; + } + /* Power down the unused lanes to save power - a few hundred mW */ tegra_dc_sor_power_down_unused_lanes(sor, link_cfg);

diff --git a/drivers/video/tegra124/sor.c b/drivers/video/tegra124/sor.c index 347b387..835033b 100644 --- a/drivers/video/tegra124/sor.c +++ b/drivers/video/tegra124/sor.c @@ -57,6 +57,23 @@ static inline void tegra_sor_write_field(struct tegra_dc_sor_data *sor, tegra_sor_writel(sor, reg, reg_val); }

+void tegra_dp_disable_tx_pu(struct tegra_dc_sor_data *sor) +{ + tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), + DP_PADCTL_TX_PU_MASK, DP_PADCTL_TX_PU_DISABLE); +} + +void tegra_dp_set_pe_vs_pc(struct tegra_dc_sor_data *sor, u32 mask, u32 pe_reg, + u32 vs_reg, u32 pc_reg, u8 pc_supported) +{ + tegra_sor_write_field(sor, PR(sor->portnum), mask, pe_reg); + tegra_sor_write_field(sor, DC(sor->portnum), mask, vs_reg); + if (pc_supported) { + tegra_sor_write_field(sor, POSTCURSOR(sor->portnum), mask, + pc_reg); + } +} + static int tegra_dc_sor_poll_register(struct tegra_dc_sor_data *sor, u32 reg, u32 mask, u32 exp_val, int poll_interval_us, int timeout_ms) @@ -803,12 +820,36 @@ void tegra_dc_sor_set_lane_parm(struct tegra_dc_sor_data *sor, tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), 0xf0, 0x0); }

+int tegra_dc_sor_set_voltage_swing(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg) +{ + u32 drive_current = 0; + u32 pre_emphasis = 0; + + /* Set to a known-good pre-calibrated setting */ + switch (link_cfg->link_bw) { + case SOR_LINK_SPEED_G1_62: + case SOR_LINK_SPEED_G2_7: + drive_current = 0x13131313; + pre_emphasis = 0; + break; + case SOR_LINK_SPEED_G5_4: + debug("T124 does not support 5.4G link clock.\n"); + default: + debug("Invalid sor link bandwidth: %d\n", link_cfg->link_bw); + return -ENOLINK; + } + + tegra_sor_writel(sor, LANE_DRIVE_CURRENT(sor->portnum), drive_current); + tegra_sor_writel(sor, PR(sor->portnum), pre_emphasis); + + return 0; +} + void tegra_dc_sor_power_down_unused_lanes(struct tegra_dc_sor_data *sor, const struct tegra_dp_link_config *link_cfg) { u32 pad_ctrl = 0; - u32 drive_current = 0; - u32 pre_emphasis = 0; int err = 0;

switch (link_cfg->lane_count) { @@ -843,25 +884,112 @@ void tegra_dc_sor_power_down_unused_lanes(struct tegra_dc_sor_data *sor, debug("Wait for lane power down failed: %d\n", err); return; } +}

- /* Set to a known-good pre-calibrated setting */ - switch (link_cfg->link_bw) { - case SOR_LINK_SPEED_G1_62: - case SOR_LINK_SPEED_G2_7: - drive_current = 0x13131313; - pre_emphasis = 0; +int tegra_sor_precharge_lanes(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *cfg) +{ + u32 val = 0; + + switch (cfg->lane_count) { + case 4: + val |= (DP_PADCTL_PD_TXD_3_NO | + DP_PADCTL_PD_TXD_2_NO); + /* fall through */ + case 2: + val |= DP_PADCTL_PD_TXD_1_NO; + /* fall through */ + case 1: + val |= DP_PADCTL_PD_TXD_0_NO; break; - case SOR_LINK_SPEED_G5_4: - drive_current = 0x19191919; - pre_emphasis = 0x09090909; default: - printf("Invalid sor link bandwidth: %d\n", link_cfg->link_bw); - return; + debug("dp: invalid lane number %d\n", cfg->lane_count); + return -EINVAL; }

- tegra_sor_writel(sor, LANE_DRIVE_CURRENT(sor->portnum), - drive_current); - tegra_sor_writel(sor, PR(sor->portnum), pre_emphasis); + tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), + (0xf << DP_PADCTL_COMODE_TXD_0_DP_TXD_2_SHIFT), + (val << DP_PADCTL_COMODE_TXD_0_DP_TXD_2_SHIFT)); + udelay(100); + tegra_sor_write_field(sor, DP_PADCTL(sor->portnum), + (0xf << DP_PADCTL_COMODE_TXD_0_DP_TXD_2_SHIFT), + 0); + + return 0; +} + +static void tegra_dc_sor_enable_sor(struct dc_ctlr *disp_ctrl, bool enable) +{ + u32 reg_val = readl(&disp_ctrl->disp.disp_win_opt); + + reg_val = enable ? reg_val | SOR_ENABLE : reg_val & ~SOR_ENABLE; + writel(reg_val, &disp_ctrl->disp.disp_win_opt); +} + +int tegra_dc_sor_detach(struct tegra_dc_sor_data *sor) +{ + int dc_reg_ctx[DC_REG_SAVE_SPACE]; + const void *blob = gd->fdt_blob; + struct dc_ctlr *disp_ctrl; + unsigned long dc_int_mask; + int node; + int ret; + + debug("%s\n", __func__); + /* Use the first display controller */ + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_DC); + if (node < 0) { + ret = -ENOENT; + goto err; + } + disp_ctrl = (struct dc_ctlr *)fdtdec_get_addr(blob, node, "reg"); + + /* Sleep mode */ + tegra_sor_writel(sor, SUPER_STATE1, SUPER_STATE1_ASY_HEAD_OP_SLEEP | + SUPER_STATE1_ASY_ORMODE_SAFE | + SUPER_STATE1_ATTACHED_YES); + tegra_dc_sor_super_update(sor); + + tegra_dc_sor_disable_win_short_raster(disp_ctrl, dc_reg_ctx); + + if (tegra_dc_sor_poll_register(sor, TEST, + TEST_ACT_HEAD_OPMODE_DEFAULT_MASK, + TEST_ACT_HEAD_OPMODE_SLEEP, 100, + TEGRA_SOR_ATTACH_TIMEOUT_MS)) { + debug("dc timeout waiting for OPMOD = SLEEP\n"); + ret = -ETIMEDOUT; + goto err; + } + + tegra_sor_writel(sor, SUPER_STATE1, SUPER_STATE1_ASY_HEAD_OP_SLEEP | + SUPER_STATE1_ASY_ORMODE_SAFE | + SUPER_STATE1_ATTACHED_NO); + + /* Mask DC interrupts during the 2 dummy frames required for detach */ + dc_int_mask = readl(&disp_ctrl->cmd.int_mask); + writel(0, &disp_ctrl->cmd.int_mask); + + /* Stop DC->SOR path */ + tegra_dc_sor_enable_sor(disp_ctrl, false); + ret = tegra_dc_sor_general_act(disp_ctrl); + if (ret) + goto err; + + /* Stop DC */ + writel(CTRL_MODE_STOP << CTRL_MODE_SHIFT, &disp_ctrl->cmd.disp_cmd); + ret = tegra_dc_sor_general_act(disp_ctrl); + if (ret) + goto err; + + tegra_dc_sor_restore_win_and_raster(disp_ctrl, dc_reg_ctx); + + writel(dc_int_mask, &disp_ctrl->cmd.int_mask); + + return 0; +err: + debug("%s: ret=%d\n", __func__, ret); + + return ret; }

int tegra_dc_sor_init(struct tegra_dc_sor_data **sorp) diff --git a/drivers/video/tegra124/sor.h b/drivers/video/tegra124/sor.h index 7f1255c..dc8fd03 100644 --- a/drivers/video/tegra124/sor.h +++ b/drivers/video/tegra124/sor.h @@ -848,6 +848,7 @@ struct tegra_dp_link_config { u32 bits_per_pixel; int alt_scramber_reset_cap; /* true for eDP */ int only_enhanced_framing; /* enhanced_frame_en ignored */ + int frame_in_ms;

/* Actual configuration */ u8 link_bw; @@ -868,6 +869,8 @@ struct tegra_dp_link_config { u32 drive_current; u32 preemphasis; u32 postcursor; + u8 aux_rd_interval; + u8 tps3_supported; };

struct tegra_dc_sor_data { @@ -896,9 +899,24 @@ void tegra_dc_sor_set_lane_parm(struct tegra_dc_sor_data *sor, const struct tegra_dp_link_config *link_cfg); void tegra_dc_sor_power_down_unused_lanes(struct tegra_dc_sor_data *sor, const struct tegra_dp_link_config *link_cfg); +int tegra_dc_sor_set_voltage_swing(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *link_cfg); +int tegra_sor_precharge_lanes(struct tegra_dc_sor_data *sor, + const struct tegra_dp_link_config *cfg); +void tegra_dp_disable_tx_pu(struct tegra_dc_sor_data *sor); +void tegra_dp_set_pe_vs_pc(struct tegra_dc_sor_data *sor, u32 mask, + u32 pe_reg, u32 vs_reg, u32 pc_reg, u8 pc_supported);

int tegra_dc_sor_attach(struct tegra_dc_sor_data *sor, const struct tegra_dp_link_config *link_cfg, const struct display_timing *timing); +int tegra_dc_sor_detach(struct tegra_dc_sor_data *sor); + +void tegra_dc_sor_disable_win_short_raster(struct dc_ctlr *disp_ctrl, + int *dc_reg_ctx); +int tegra_dc_sor_general_act(struct dc_ctlr *disp_ctrl); +void tegra_dc_sor_restore_win_and_raster(struct dc_ctlr *disp_ctrl, + int *dc_reg_ctx); + int tegra_dc_sor_init(struct tegra_dc_sor_data **sorp); #endif diff --git a/include/linux/drm_dp_helper.h b/include/linux/drm_dp_helper.h index 86b06e1..758e4a4 100644 --- a/include/linux/drm_dp_helper.h +++ b/include/linux/drm_dp_helper.h @@ -264,6 +264,7 @@ #define DP_LINK_STATUS_UPDATED (1 << 7)

#define DP_SINK_STATUS 0x205 +#define DP_SINK_STATUS_PORT0_IN_SYNC (1 << 0)

#define DP_RECEIVE_PORT_0_STATUS (1 << 0) #define DP_RECEIVE_PORT_1_STATUS (1 << 1)