Currently, 83xx, 86xx, and 85xx have a lot of duplicated code dedicated to defining and manipulating the LBC registers. Merge this into a single spot.

To do this, we have to decide on a common name for the data structure that holds the lbc registers - it will now be known as fsl_lbc_t, and we adopt a common name for the immap layouts that include the lbc - this was previously known as either im_lbc or lbus; use the former.

In addition, create accessors for the BR/OR regs that use in/out_be32 and use those instead of the mismash of access methods currently in play.

I have done a successful ppc build all and tested a board or two from each processor family.

Signed-off-by: Becky Bruce beckyb@kernel.crashing.org --- Makefile | 1 + arch/powerpc/cpu/mpc83xx/cpu.c | 12 ++-- arch/powerpc/cpu/mpc83xx/cpu_init.c | 53 ++---------- arch/powerpc/cpu/mpc83xx/nand_init.c | 4 +- arch/powerpc/cpu/mpc83xx/speed.c | 2 +- arch/powerpc/cpu/mpc85xx/cpu.c | 12 +-- arch/powerpc/cpu/mpc85xx/cpu_init.c | 58 +------------ arch/powerpc/cpu/mpc85xx/cpu_init_nand.c | 6 +- arch/powerpc/cpu/mpc85xx/speed.c | 5 +- arch/powerpc/cpu/mpc86xx/cpu.c | 15 +--- arch/powerpc/cpu/mpc86xx/cpu_init.c | 55 +------------ arch/powerpc/cpu/mpc86xx/speed.c | 5 +- arch/powerpc/cpu/mpc8xxx/Makefile | 3 + arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 84 ++++++++++++++++++ arch/powerpc/include/asm/config.h | 3 + arch/powerpc/include/asm/fsl_lbc.h | 109 ++++++++++++++---------- arch/powerpc/include/asm/immap_83xx.h | 13 ++-- arch/powerpc/include/asm/immap_85xx.h | 46 +---------- arch/powerpc/include/asm/immap_86xx.h | 49 +---------- board/atum8548/atum8548.c | 2 +- board/esd/vme8349/vme8349.c | 2 +- board/freescale/mpc8313erdb/sdram.c | 2 +- board/freescale/mpc8349emds/mpc8349emds.c | 2 +- board/freescale/mpc8349itx/mpc8349itx.c | 7 +- board/freescale/mpc8360emds/mpc8360emds.c | 6 +- board/freescale/mpc8360erdk/nand.c | 6 +- board/freescale/mpc8540ads/mpc8540ads.c | 8 +- board/freescale/mpc8541cds/mpc8541cds.c | 13 +-- board/freescale/mpc8544ds/mpc8544ds.c | 2 +- board/freescale/mpc8548cds/mpc8548cds.c | 13 +-- board/freescale/mpc8555cds/mpc8555cds.c | 12 +-- board/freescale/mpc8560ads/mpc8560ads.c | 8 +- board/freescale/mpc8568mds/mpc8568mds.c | 11 +-- board/freescale/mpc8569mds/mpc8569mds.c | 2 +- board/mpc8540eval/mpc8540eval.c | 6 +- board/pm854/pm854.c | 2 +- board/pm856/pm856.c | 2 +- board/sbc8349/sbc8349.c | 2 +- board/sbc8548/sbc8548.c | 20 ++--- board/sbc8560/sbc8560.c | 6 +- board/sheldon/simpc8313/sdram.c | 2 +- board/sheldon/simpc8313/simpc8313.c | 2 +- board/socrates/socrates.c | 31 +++---- board/tqc/tqm834x/tqm834x.c | 8 +- board/tqc/tqm85xx/nand.c | 12 ++-- board/tqc/tqm85xx/tqm85xx.c | 35 ++++---- board/xes/xpedite5170/xpedite5170.c | 10 +-- board/xes/xpedite5200/xpedite5200.c | 11 +-- board/xes/xpedite5370/xpedite5370.c | 9 +- drivers/mtd/nand/fsl_elbc_nand.c | 18 ++--- include/mpc85xx.h | 2 - nand_spl/board/freescale/mpc8536ds/nand_boot.c | 5 +- nand_spl/nand_boot_fsl_elbc.c | 4 +- 53 files changed, 318 insertions(+), 500 deletions(-) create mode 100644 arch/powerpc/cpu/mpc8xxx/fsl_lbc.c

diff --git a/Makefile b/Makefile index c26e491..2d4327a 100644 --- a/Makefile +++ b/Makefile @@ -220,6 +220,7 @@ LIBS += drivers/power/libpower.a LIBS += drivers/spi/libspi.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a +LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a endif ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index d3be909..24193ce 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -156,16 +156,16 @@ int checkcpu(void) void upmconfig (uint upm, uint *table, uint size) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; volatile uchar *dummy = NULL; const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ - volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ + volatile u32 *mxmr = &lbc->mamr + upm; /* ptr to mamr, mbmr, or mcmr */ uint i;

- /* Scan all the banks to determine the base address of the device */ + /* Find the address for the dummy write transaction */ for (i = 0; i < 8; i++) { - if ((lbus->bank[i].br & BR_MSEL) == msel) { - dummy = (uchar *) (lbus->bank[i].br & BR_BA); + if ((get_lbc_br(i) & BR_MSEL) == msel) { + dummy = (uchar *) (get_lbc_br(i) & BR_BA); break; } } @@ -179,7 +179,7 @@ void upmconfig (uint upm, uint *table, uint size) *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;

for (i = 0; i < size; i++) { - lbus->mdr = table[i]; + lbc->mdr = table[i]; __asm__ __volatile__ ("sync"); *dummy = 0; /* Write the value to memory and increment MAD */ __asm__ __volatile__ ("sync"); diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f3b67ae..83cba93 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -236,8 +236,8 @@ void cpu_init_f (volatile immap_t * im) /* LCRR - Clock Ratio Register (10.3.1.16) * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description */ - clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); - __raw_readl(&im->lbus.lcrr); + clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->im_lbc.lcrr); isync();

/* Enable Time Base & Decrementer ( so we will have udelay() )*/ @@ -267,80 +267,41 @@ void cpu_init_f (volatile immap_t * im) /* Config QE ioports */ config_qe_ioports(); #endif + /* Set up preliminary BR/OR regs */ + init_early_memctl_regs();

- /* - * Memory Controller: - */ - - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_BR0_PRELIM) \ - && defined(CONFIG_SYS_OR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWAR0_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM; + /* Local Access window setup */ +#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM) im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM; #else -#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined +#error CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined #endif

-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM; - im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM) im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM; im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM; #endif -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM; - im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM) im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM; im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM; #endif -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM; - im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM) im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM; im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM; #endif -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM; - im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM) im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM; im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM; #endif -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM; - im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM) im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM; im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM; #endif -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM; - im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM) im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM; im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM; #endif -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM; - im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM) im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM; im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM; diff --git a/arch/powerpc/cpu/mpc83xx/nand_init.c b/arch/powerpc/cpu/mpc83xx/nand_init.c index 38e141a..d1648b7 100644 --- a/arch/powerpc/cpu/mpc83xx/nand_init.c +++ b/arch/powerpc/cpu/mpc83xx/nand_init.c @@ -88,8 +88,8 @@ void cpu_init_f (volatile immap_t * im) && defined(CONFIG_SYS_NAND_OR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM; + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM; #else diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index 500eef1..a42c495 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -388,7 +388,7 @@ int get_clocks(void)

lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); - lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; + lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; switch (lcrr) { case 2: case 4: diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index fddeb2f..4160b60 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -257,8 +257,7 @@ void upmconfig (uint upm, uint * table, uint size) { int i, mdr, mad, old_mad = 0; volatile u32 *mxmr; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - volatile u32 *brp,*orp; + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile u8* dummy = NULL; int upmmask;

@@ -281,12 +280,9 @@ void upmconfig (uint upm, uint * table, uint size) }

/* Find the address for the dummy write transaction */ - for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8; - i++, brp += 2, orp += 2) { - - /* Look for a valid BR with selected UPM */ - if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) { - dummy = (volatile u8*)(in_be32(brp) & BR_BA); + for (i = 0; i < 8; i++) { + if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) { + dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); break; } } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 99431dc..d491e2a 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -154,7 +154,6 @@ static void corenet_tb_init(void)

void cpu_init_f (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); extern void m8560_cpm_reset (void); #ifdef CONFIG_MPC8548 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); @@ -177,60 +176,7 @@ void cpu_init_f (void) config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR); #endif

- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ -#if defined(CONFIG_SYS_OR0_REMAP) - out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP); -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP); -#endif - - /* now restrict to preliminary range */ - /* if cs1 is already set via debugger, leave cs0/cs1 alone */ - if (! memctl->br1 & 1) { -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM); - out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM); - out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM); -#endif - } - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM); - out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM); - out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM); - out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM); - out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM); - out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM); - out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM); -#endif + init_early_memctl_regs();

#if defined(CONFIG_CPM2) m8560_cpm_reset(); @@ -263,7 +209,7 @@ void cpu_init_f (void) int cpu_init_r(void) { #ifdef CONFIG_SYS_LBC_LCRR - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; #endif

puts ("L2: "); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c index 184cca4..8fb27ab 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c @@ -25,7 +25,7 @@

void cpu_init_f(void) { - ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + fsl_lbc_t *lbc = LBC_BASE_ADDR;

/* * LCRR - Clock Ratio Register - set up local bus timing @@ -34,8 +34,8 @@ void cpu_init_f(void) out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);

#if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM) - out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM); - out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM); + set_lbc_br(0, CONFIG_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_NAND_OR_PRELIM); #else #error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined #endif diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 8132115..dd4c6b3 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -172,10 +172,7 @@ void get_sys_info (sys_info_t * sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { #if defined(CONFIG_FSL_CORENET) diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index 1887575..0fe94a0 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -180,22 +180,9 @@ watchdog_reset(void) */ void mpc86xx_reginfo(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; - print_bats(); print_laws(); - - printf ("Local Bus Controller Registers\n" - "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0)); - printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1)); - printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2)); - printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3)); - printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4)); - printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5)); - printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6)); - printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7)); - + print_lbc_regs(); }

/* diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c index b4f047d..82c216b 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c @@ -46,9 +46,6 @@ DECLARE_GLOBAL_DATA_PTR;

void cpu_init_f(void) { - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *memctl = &immap->im_lbc; - /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);

@@ -61,58 +58,8 @@ void cpu_init_f(void)

setup_bats();

- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_OR0_REMAP) - memctl->or0 = CONFIG_SYS_OR0_REMAP; -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - memctl->or1 = CONFIG_SYS_OR1_REMAP; -#endif - - /* now restrict to preliminary range */ -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - memctl->br0 = CONFIG_SYS_BR0_PRELIM; - memctl->or0 = CONFIG_SYS_OR0_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - memctl->or1 = CONFIG_SYS_OR1_PRELIM; - memctl->br1 = CONFIG_SYS_BR1_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - memctl->or2 = CONFIG_SYS_OR2_PRELIM; - memctl->br2 = CONFIG_SYS_BR2_PRELIM; -#endif + init_early_memctl_regs();

-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - memctl->or3 = CONFIG_SYS_OR3_PRELIM; - memctl->br3 = CONFIG_SYS_BR3_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - memctl->or4 = CONFIG_SYS_OR4_PRELIM; - memctl->br4 = CONFIG_SYS_BR4_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - memctl->or5 = CONFIG_SYS_OR5_PRELIM; - memctl->br5 = CONFIG_SYS_BR5_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - memctl->or6 = CONFIG_SYS_OR6_PRELIM; - memctl->br6 = CONFIG_SYS_BR6_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - memctl->or7 = CONFIG_SYS_OR7_PRELIM; - memctl->br7 = CONFIG_SYS_BR7_PRELIM; -#endif #if defined(CONFIG_FSL_DMA) dma_init(); #endif diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c index 64a3479..a2d0a8a 100644 --- a/arch/powerpc/cpu/mpc86xx/speed.c +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -97,10 +97,7 @@ void get_sys_info(sys_info_t *sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 481f9e5..34a5198 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -10,9 +10,12 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib8xxx.a

+ifeq ($(CPU), $(filter $(CPU), mpc85xx mpc86xx)) COBJS-y += cpu.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_PCI) += pci_cfg.o +endif +COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o

SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c new file mode 100644 index 0000000..e0a15c4 --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -0,0 +1,84 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_lbc.h> + +void print_lbc_regs(void) +{ + int i; + + printf("\nLocal Bus Controller Registers\n"); + for (i = 0; i < 8; i++) { + printf("BR%d\t0x%08X\tOR%d\t0x%08X\n", + i, get_lbc_br(i), i, get_lbc_or(i)); + } +} + +void init_early_memctl_regs(void) +{ + uint init_br1 = 1; + +#ifdef CONFIG_MPC85xx + /* if cs1 is already set via debugger, leave cs0/cs1 alone */ + if (get_lbc_br(1) & BR_V) + init_br1 = 0; +#endif + + /* + * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at + * preliminary addresses - these have to be modified later + * when FLASH size has been determined + */ +#if defined(CONFIG_SYS_OR0_REMAP) + set_lbc_or(0, CONFIG_SYS_OR0_REMAP); +#endif +#if defined(CONFIG_SYS_OR1_REMAP) + set_lbc_or(1, CONFIG_SYS_OR1_REMAP); +#endif + /* now restrict to preliminary range */ + if (init_br1) { + set_lbc_br(0, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR0_PRELIM); + +#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) + set_lbc_or(1, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR1_PRELIM); +#endif + } + +#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) + set_lbc_or(5, CONFIG_SYS_OR5_PRELIM); + set_lbc_br(5, CONFIG_SYS_BR5_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) + set_lbc_or(6, CONFIG_SYS_OR6_PRELIM); + set_lbc_br(6, CONFIG_SYS_BR6_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) + set_lbc_or(7, CONFIG_SYS_OR7_PRELIM); + set_lbc_br(7, CONFIG_SYS_BR7_PRELIM); +#endif +} diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index fc3facb..832bad5 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -76,4 +76,7 @@ /* Relocation to SDRAM works on all PPC boards */ #define CONFIG_RELOC_FIXUP_WORKS

+/* Currently all plats have a local bus controller */ +#define CONFIG_FSL_LBC + #endif /* _ASM_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 03ae6a7..33e6dd9 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -14,6 +14,7 @@ #define __ASM_PPC_FSL_LBC_H

#include <config.h> +#include <common.h>

/* BR - Base Registers */ @@ -453,49 +454,69 @@ #define LTESR_CC 0x00000001

#ifndef __ASSEMBLY__ -/* - * Local Bus Controller Registers. - */ -typedef struct lbus_bank { - u32 br; /* Base Register */ - u32 or; /* Option Register */ -} lbus_bank_t; - -typedef struct fsl_lbus { - lbus_bank_t bank[8]; - u8 res0[0x28]; - u32 mar; /* UPM Address Register */ - u8 res1[0x4]; - u32 mamr; /* UPMA Mode Register */ - u32 mbmr; /* UPMB Mode Register */ - u32 mcmr; /* UPMC Mode Register */ - u8 res2[0x8]; - u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ - u32 mdr; /* UPM Data Register */ - u8 res3[0x4]; - u32 lsor; /* Special Operation Initiation Register */ - u32 lsdmr; /* SDRAM Mode Register */ - u8 res4[0x8]; - u32 lurt; /* UPM Refresh Timer */ - u32 lsrt; /* SDRAM Refresh Timer */ - u8 res5[0x8]; - u32 ltesr; /* Transfer Error Status Register */ - u32 ltedr; /* Transfer Error Disable Register */ - u32 lteir; /* Transfer Error Interrupt Register */ - u32 lteatr; /* Transfer Error Attributes Register */ - u32 ltear; /* Transfer Error Address Register */ - u8 res6[0xC]; - u32 lbcr; /* Configuration Register */ - u32 lcrr; /* Clock Ratio Register */ - u8 res7[0x8]; - u32 fmr; /* Flash Mode Register */ - u32 fir; /* Flash Instruction Register */ - u32 fcr; /* Flash Command Register */ - u32 fbar; /* Flash Block Addr Register */ - u32 fpar; /* Flash Page Addr Register */ - u32 fbcr; /* Flash Byte Count Register */ - u8 res8[0xF08]; -} fsl_lbus_t; -#endif /* __ASSEMBLY__ */ +#include <asm/io.h> + +extern void print_lbc_regs(void); +extern void init_early_memctl_regs(void); + +#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR) +#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br)) +#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or)) +#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v)) +#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v)) + +typedef struct lbc_bank { + u32 br; + u32 or; +} lbc_bank_t;

+/* Local Bus Controller Registers */ +typedef struct fsl_lbc { + lbc_bank_t bank[8]; + u8 res1[40]; + u32 mar; /* LBC UPM Addr */ + u8 res2[4]; + u32 mamr; /* LBC UPMA Mode */ + u32 mbmr; /* LBC UPMB Mode */ + u32 mcmr; /* LBC UPMC Mode */ + u8 res3[8]; + u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ + u32 mdr; /* LBC UPM Data */ +#ifdef CONFIG_FSL_ELBC + u8 res4[4]; + u32 lsor; + u8 res5[12]; + u32 lurt; /* LBC UPM Refresh Timer */ + u8 res6[4]; +#else + u8 res4[8]; + u32 lsdmr; /* LBC SDRAM Mode */ + u8 res5[8]; + u32 lurt; /* LBC UPM Refresh Timer */ + u32 lsrt; /* LBC SDRAM Refresh Timer */ +#endif + u8 res7[8]; + u32 ltesr; /* LBC Transfer Error Status */ + u32 ltedr; /* LBC Transfer Error Disable */ + u32 lteir; /* LBC Transfer Error IRQ */ + u32 lteatr; /* LBC Transfer Error Attrs */ + u32 ltear; /* LBC Transfer Error Addr */ + u8 res8[12]; + u32 lbcr; /* LBC Configuration */ + u32 lcrr; /* LBC Clock Ratio */ +#ifdef CONFIG_NAND_FSL_ELBC + u8 res9[0x8]; + u32 fmr; /* Flash Mode Register */ + u32 fir; /* Flash Instruction Register */ + u32 fcr; /* Flash Command Register */ + u32 fbar; /* Flash Block Addr Register */ + u32 fpar; /* Flash Page Addr Register */ + u32 fbcr; /* Flash Byte Count Register */ + u8 res10[0xF08]; +#else + u8 res9[0xF28]; +#endif +} fsl_lbc_t; + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_PPC_FSL_LBC_H */ diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 6b42a73..9353dc0 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -635,7 +635,7 @@ typedef struct immap { u8 res2[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res3[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res4[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -675,7 +675,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -710,7 +710,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -755,7 +755,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -805,7 +805,7 @@ typedef struct immap { u8 res4[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res5[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res6[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -844,7 +844,7 @@ typedef struct immap { u8 res3[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res4[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res5[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -868,6 +868,7 @@ typedef struct immap { #endif #define CONFIG_SYS_MPC83xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET) +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)

#define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index e7954e6..1f65566 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -266,50 +266,6 @@ typedef struct ccsr_duart { } ccsr_duart_t; #endif

-/* Local Bus Controller Registers */ -typedef struct ccsr_lbc { - u32 br0; /* LBC Base 0 */ - u32 or0; /* LBC Options 0 */ - u32 br1; /* LBC Base 1 */ - u32 or1; /* LBC Options 1 */ - u32 br2; /* LBC Base 2 */ - u32 or2; /* LBC Options 2 */ - u32 br3; /* LBC Base 3 */ - u32 or3; /* LBC Options 3 */ - u32 br4; /* LBC Base 4 */ - u32 or4; /* LBC Options 4 */ - u32 br5; /* LBC Base 5 */ - u32 or5; /* LBC Options 5 */ - u32 br6; /* LBC Base 6 */ - u32 or6; /* LBC Options 6 */ - u32 br7; /* LBC Base 7 */ - u32 or7; /* LBC Options 7 */ - u8 res1[40]; - u32 mar; /* LBC UPM Addr */ - u8 res2[4]; - u32 mamr; /* LBC UPMA Mode */ - u32 mbmr; /* LBC UPMB Mode */ - u32 mcmr; /* LBC UPMC Mode */ - u8 res3[8]; - u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ - u32 mdr; /* LBC UPM Data */ - u8 res4[8]; - u32 lsdmr; /* LBC SDRAM Mode */ - u8 res5[8]; - u32 lurt; /* LBC UPM Refresh Timer */ - u32 lsrt; /* LBC SDRAM Refresh Timer */ - u8 res6[8]; - u32 ltesr; /* LBC Transfer Error Status */ - u32 ltedr; /* LBC Transfer Error Disable */ - u32 lteir; /* LBC Transfer Error IRQ */ - u32 lteatr; /* LBC Transfer Error Attrs */ - u32 ltear; /* LBC Transfer Error Addr */ - u8 res7[12]; - u32 lbcr; /* LBC Configuration */ - u32 lcrr; /* LBC Clock Ratio */ - u8 res8[3880]; -} ccsr_lbc_t; - /* eSPI Registers */ typedef struct ccsr_espi { u32 mode; /* eSPI mode */ @@ -2108,7 +2064,7 @@ enum { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET) #define CONFIG_SYS_MPC85xx_DDR2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) -#define CONFIG_SYS_MPC85xx_LBC_ADDR \ +#define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) #define CONFIG_SYS_MPC85xx_ESPI_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET) diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index fd7acdb..b9e02db 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -12,6 +12,7 @@

#include <asm/types.h> #include <asm/fsl_dma.h> +#include <asm/fsl_lbc.h> #include <asm/fsl_i2c.h>

/* Local-Access Registers and MCM Registers(0x0000-0x2000) */ @@ -190,51 +191,6 @@ typedef struct ccsr_duart { char res5[2543]; } ccsr_duart_t;

- -/* Local Bus Controller Registers(0x5000-0x6000) */ -typedef struct ccsr_lbc { - uint br0; /* 0x5000 - LBC Base Register 0 */ - uint or0; /* 0x5004 - LBC Options Register 0 */ - uint br1; /* 0x5008 - LBC Base Register 1 */ - uint or1; /* 0x500c - LBC Options Register 1 */ - uint br2; /* 0x5010 - LBC Base Register 2 */ - uint or2; /* 0x5014 - LBC Options Register 2 */ - uint br3; /* 0x5018 - LBC Base Register 3 */ - uint or3; /* 0x501c - LBC Options Register 3 */ - uint br4; /* 0x5020 - LBC Base Register 4 */ - uint or4; /* 0x5024 - LBC Options Register 4 */ - uint br5; /* 0x5028 - LBC Base Register 5 */ - uint or5; /* 0x502c - LBC Options Register 5 */ - uint br6; /* 0x5030 - LBC Base Register 6 */ - uint or6; /* 0x5034 - LBC Options Register 6 */ - uint br7; /* 0x5038 - LBC Base Register 7 */ - uint or7; /* 0x503c - LBC Options Register 7 */ - char res1[40]; - uint mar; /* 0x5068 - LBC UPM Address Register */ - char res2[4]; - uint mamr; /* 0x5070 - LBC UPMA Mode Register */ - uint mbmr; /* 0x5074 - LBC UPMB Mode Register */ - uint mcmr; /* 0x5078 - LBC UPMC Mode Register */ - char res3[8]; - uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */ - uint mdr; /* 0x5088 - LBC UPM Data Register */ - char res4[8]; - uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */ - char res5[8]; - uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */ - uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */ - char res6[8]; - uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */ - uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */ - uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */ - uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */ - uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */ - char res7[12]; - uint lbcr; /* 0x50d0 - LBC Configuration Register */ - uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */ - char res8[3880]; -} ccsr_lbc_t; - /* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */ typedef struct ccsr_pex { uint cfg_addr; /* 0x8000 - PEX Configuration Address Register */ @@ -1270,7 +1226,7 @@ typedef struct immap { ccsr_ddr_t im_ddr1; ccsr_i2c_t im_i2c; ccsr_duart_t im_duart; - ccsr_lbc_t im_lbc; + fsl_lbc_t im_lbc; ccsr_ddr_t im_ddr2; char res1[4096]; ccsr_pex_t im_pex1; @@ -1303,6 +1259,7 @@ extern immap_t *immr;

#define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)

#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index c11a5c3..4f7d935 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -47,7 +47,7 @@ int board_early_init_f (void) int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);

if ((uint)&gur->porpllsr != 0xe00e0000) { diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c index b0ebad7..96698e7 100644 --- a/board/esd/vme8349/vme8349.c +++ b/board/esd/vme8349/vme8349.c @@ -105,7 +105,7 @@ int misc_init_r() { immap_t *im = (immap_t *)CONFIG_SYS_IMMR;

- clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0); + clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0);

return 0; } diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 0c4fd68..7aede13 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -110,7 +110,7 @@ static long fixed_sdram(void) phys_size_t initdram(int board_type) { volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize;

if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 61d1249..365ac37 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -192,7 +192,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;

/* diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 7da39f1..5647579 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -221,15 +221,14 @@ int misc_init_f(void) 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 }; volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus;

- lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM; - lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM; + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);

/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 */ - lbus->mamr = 0x08404440; + immap->im_lbc.mamr = 0x08404440;

upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));

diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 4f55732..59ada9c 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -280,7 +280,7 @@ int checkboard(void) static int sdram_init(unsigned int base) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + fsl_lbc_t *lbc = LBC_BASE_ADDR; const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024; int rem = base % sdram_size; uint *sdram_addr; @@ -293,8 +293,8 @@ static int sdram_init(unsigned int base) /* * Setup SDRAM Base and Option Registers */ - immap->lbus.bank[2].br = base | CONFIG_SYS_BR2; - immap->lbus.bank[2].or = CONFIG_SYS_OR2; + set_lbc_br(2, base | CONFIG_SYS_BR2); + set_lbc_or(2, CONFIG_SYS_OR2); immap->sysconf.lblaw[2].bar = base; immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;

diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c index 9ffffb4..92d56a3 100644 --- a/board/freescale/mpc8360erdk/nand.c +++ b/board/freescale/mpc8360erdk/nand.c @@ -82,9 +82,9 @@ static struct fsl_upm_nand fun = {

int board_nand_init(struct nand_chip *nand) { - fun.upm.mxmr = &im->lbus.mamr; - fun.upm.mdr = &im->lbus.mdr; - fun.upm.mar = &im->lbus.mar; + fun.upm.mxmr = &im->im_lbc.mamr; + fun.upm.mdr = &im->im_lbc.mdr; + fun.upm.mar = &im->im_lbc.mar;

upm_setup(&fun.upm);

diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 9e3f677..f9ff827 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -117,7 +117,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; @@ -176,7 +176,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;

puts(" SDRAM: "); @@ -185,8 +185,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync");

diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index c30d966..0580fe7 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)

uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,16 +352,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync");

- lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 0be2d89..581d5f2 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -40,7 +40,7 @@ int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); u8 vboot; u8 *pixis_base = (u8 *)PIXIS_BASE; diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index aa3f32b..f016995 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -118,7 +118,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; @@ -154,7 +154,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)

uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -166,16 +166,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync");

- lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index ecddd0d..b7e0e0c 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)

uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,12 +352,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync");

diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 2bca0f2..489f90b 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -322,7 +322,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; @@ -381,7 +381,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;

puts(" SDRAM: "); @@ -390,8 +390,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync");

diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 4ec13a9..036bf95 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -181,7 +181,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; @@ -214,7 +214,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)

uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common;

@@ -225,16 +225,13 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); asm("msync");

lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync");

- lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 1eddeef..81e8ff5 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -308,7 +308,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index 7c27233..054d644 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -69,7 +69,7 @@ phys_size_t initdram (int board_type) long dram_size = 0;

#if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -110,8 +110,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index 5353d73..a302b91 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -134,7 +134,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index b14a3d3..f9d92d9 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -290,7 +290,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 34861d4..50fae7c 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -160,7 +160,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;

puts("\n SDRAM on Local Bus: "); diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 194f6ab..d62cfd1 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -116,7 +116,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

uint clkdiv; uint lbc_hz; @@ -152,7 +152,7 @@ sdram_init(void) #if defined(CONFIG_SYS_LBC_SDRAM_SIZE)

uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common;

@@ -163,22 +163,14 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); - asm("msync"); - - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - asm("msync"); - - out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM); - asm("msync"); - - out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM); - asm("msync"); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);

out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); asm("msync");

- out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT); out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); asm("msync"); diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index c40b5e3..10ba62f 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -269,7 +269,7 @@ phys_size_t initdram (int board_type)

#if 0 #if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -310,8 +310,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/sheldon/simpc8313/sdram.c b/board/sheldon/simpc8313/sdram.c index ebb70a2..ba59943 100644 --- a/board/sheldon/simpc8313/sdram.c +++ b/board/sheldon/simpc8313/sdram.c @@ -129,7 +129,7 @@ void si_read_i2c(u32 lbyte, int count, u8 *buffer) phys_size_t initdram(int board_type) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc= &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize;

if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im) diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c index cb30b48..c2164c9 100644 --- a/board/sheldon/simpc8313/simpc8313.c +++ b/board/sheldon/simpc8313/simpc8313.c @@ -93,7 +93,7 @@ int misc_init_r(void) { int rc = 0; immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - fsl_lbus_t *lbus = &immap->lbus; + fsl_lbc_t *lbus = &immap->im_lbc; u32 *mxmr = &lbus->mamr; /* Pointer to mamr */

/* UPM Table Configuration Code */ diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 9183c15..72e7401 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -87,8 +87,6 @@ int checkboard (void)

int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -99,8 +97,10 @@ int misc_init_r (void) * Check if boot FLASH isn't max size */ if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) { - memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, gd->bd->bi_flashstart | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff));

/* * Re-check to get correct base address @@ -112,8 +112,8 @@ int misc_init_r (void) * Check if only one FLASH bank is available */ if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0);

/* * Re-do flash protection upon new addresses @@ -148,7 +148,7 @@ int misc_init_r (void) */ void local_bus_init (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); sys_info_t sysinfo; uint clkdiv; @@ -299,26 +299,25 @@ const gdc_regs *board_get_regs (void)

int lime_probe(void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint cfg_br2; uint cfg_or2; int type;

- cfg_br2 = memctl->br2; - cfg_or2 = memctl->or2; + cfg_br2 = get_lbc_br(2); + cfg_or2 = get_lbc_or(2);

/* Configure GPCM for CS2 */ - memctl->br2 = 0; - memctl->or2 = 0xfc000410; - memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901; + set_lbc_br(2, 0); + set_lbc_or(2, 0xfc000410); + set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901);

/* Get controller type */ type = mb862xx_probe(CONFIG_SYS_LIME_BASE);

/* Restore previous CS2 configuration */ - memctl->br2 = 0; - memctl->or2 = cfg_or2; - memctl->br2 = cfg_br2; + set_lbc_br(2, 0); + set_lbc_or(2, cfg_or2); + set_lbc_br(2, cfg_br2);

return (type == MB862XX_TYPE_LIME) ? 1 : 0; } diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index e564879..8d046f4 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -253,10 +253,10 @@ static int detect_num_flash_banks(void) debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks);

/* set OR0 and BR0 */ - im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH | - (-(total_size) & OR_GPCM_AM); - im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) | - (BR_MS_GPCM | BR_PS_32 | BR_V); + set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH | + (-(total_size) & OR_GPCM_AM)); + set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) | + (BR_MS_GPCM | BR_PS_32 | BR_V));

return (0); } diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c index 3da689a..4b16c31 100644 --- a/board/tqc/tqm85xx/nand.c +++ b/board/tqc/tqm85xx/nand.c @@ -377,7 +377,7 @@ volatile const u32 *nand_upm_patt; */ static void upmb_write (u_char addr, ulong val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

out_be32 (&lbc->mdr, val);

@@ -393,14 +393,14 @@ static void upmb_write (u_char addr, ulong val) /* * Initialize UPM for NAND flash access. */ -static void nand_upm_setup (volatile ccsr_lbc_t *lbc) +static void nand_upm_setup (volatile fsl_lbc_t *lbc) { uint i, j; uint or3 = CONFIG_SYS_OR3_PRELIM; uint clock = get_lbc_clock ();

- out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */ - out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM); + set_lbc_br(3, 0); /* disable bank and reset all bits */ + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);

/* * Search appropriate UPM table for bus clock. @@ -424,7 +424,7 @@ static void nand_upm_setup (volatile ccsr_lbc_t *lbc) /* EAD must be set due to TQM8548 timing specification */ or3 |= OR_UPM_EAD;

- out_be32 (&lbc->or3, or3); + set_lbc_or(3, or3);

/* Assign address of table */ nand_upm_patt = upm_freq_table[i].upm_patt; @@ -458,7 +458,7 @@ void board_nand_select_device (struct nand_chip *nand, int chip)

int board_nand_init (struct nand_chip *nand) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

if (!nand_upm_patt) nand_upm_setup (lbc); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 8c9d586..fc2a6cb 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -269,8 +269,6 @@ int checkboard (void)

int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -281,26 +279,27 @@ int misc_init_r (void) * Recalculate CS configuration if second FLASH bank is available */ if (flash_info[0].size > 0) { - memctl->or1 = ((-flash_info[0].size) & 0xffff8000) | - (CONFIG_SYS_OR1_PRELIM & 0x00007fff); - memctl->br1 = gd->bd->bi_flashstart | - (CONFIG_SYS_BR1_PRELIM & 0x00007fff); + set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) | + (CONFIG_SYS_OR1_PRELIM & 0x00007fff)); + set_lbc_br(1, gd->bd->bi_flashstart | + (CONFIG_SYS_BR1_PRELIM & 0x00007fff)); /* * Re-check to get correct base address for bank 1 */ flash_get_size (gd->bd->bi_flashstart, 0); } else { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0); }

/* * If bank 1 is equipped, bank 0 is mapped after bank 1 */ - memctl->or0 = ((-flash_info[1].size) & 0xffff8000) | - (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) | - (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); + /* * Re-check to get correct base address for bank 0 */ @@ -341,7 +340,7 @@ int misc_init_r (void) */ static void upmc_write (u_char addr, uint val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

out_be32 (&lbc->mdr, val);

@@ -358,7 +357,7 @@ static void upmc_write (u_char addr, uint val)

uint get_lbc_clock (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sys_info; ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;

@@ -386,7 +385,7 @@ uint get_lbc_clock (void) void local_bus_init (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint lbc_mhz = get_lbc_clock () / 1000000;

#ifdef CONFIG_MPC8548 @@ -502,10 +501,10 @@ void local_bus_init (void) * set if Local Bus Clock is > 83 MHz. */ if (lbc_mhz > 83) - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); + set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); else - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN); - out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN); + set_lbc_or(2, CONFIG_SYS_OR2_CAN); + set_lbc_br(2, CONFIG_SYS_BR2_CAN);

/* LGPL4 is UPWAIT */ out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c index f4231a9..5822941 100644 --- a/board/xes/xpedite5170/xpedite5170.c +++ b/board/xes/xpedite5170/xpedite5170.c @@ -56,8 +56,6 @@ int checkboard(void) */ static void flash_cs_fixup(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; int flash_sel;

/* @@ -70,11 +68,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);

if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);

- out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } }

diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite5200/xpedite5200.c index 7109771..a2627f8 100644 --- a/board/xes/xpedite5200/xpedite5200.c +++ b/board/xes/xpedite5200/xpedite5200.c @@ -38,7 +38,7 @@ extern void ft_board_pci_setup(void *blob, bd_t *bd);

int checkboard(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); char *s;

@@ -65,7 +65,6 @@ int checkboard(void)

static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel;

/* @@ -78,11 +77,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);

if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);

- out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } }

diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite5370/xpedite5370.c index 48d9fc8..2a060c2 100644 --- a/board/xes/xpedite5370/xpedite5370.c +++ b/board/xes/xpedite5370/xpedite5370.c @@ -58,7 +58,6 @@ int checkboard(void)

static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel;

/* @@ -71,11 +70,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);

if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);

- out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } }

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 146e9bf..acdb431 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -75,7 +75,7 @@ struct fsl_elbc_ctrl { struct fsl_elbc_mtd *chips[MAX_BANKS];

/* device info */ - fsl_lbus_t *regs; + fsl_lbc_t *regs; u8 __iomem *addr; /* Address of assigned FCM buffer */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes; /* Number of bytes read during command */ @@ -171,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; int buf_num;

ctrl->page = page_addr; @@ -211,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; long long end_tick; u32 ltesr;

@@ -261,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs;

if (priv->page_size) { out_be32(&lbc->fir, @@ -295,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs;

ctrl->use_mdr = 0;

@@ -633,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs;

if (ctrl->status != LTESR_CC) return NAND_STATUS_FAIL; @@ -697,11 +697,7 @@ static void fsl_elbc_ctrl_init(void) if (!elbc_ctrl) return;

-#ifdef CONFIG_MPC85xx - elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR; -#else - elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus; -#endif + elbc_ctrl->regs = LBC_BASE_ADDR;

/* clear event registers */ out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK); diff --git a/include/mpc85xx.h b/include/mpc85xx.h index a4d4d65..2495b99 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -6,8 +6,6 @@ #ifndef __MPC85xx_H__ #define __MPC85xx_H__

-#include <asm/fsl_lbc.h> - /* define for common ppc_asm.tmpl */ #define EXC_OFF_SYS_RESET 0x100 /* System reset */ #define _START_OFFSET 0 diff --git a/nand_spl/board/freescale/mpc8536ds/nand_boot.c b/nand_spl/board/freescale/mpc8536ds/nand_boot.c index af29dc2..5a0a0c7 100644 --- a/nand_spl/board/freescale/mpc8536ds/nand_boot.c +++ b/nand_spl/board/freescale/mpc8536ds/nand_boot.c @@ -34,12 +34,11 @@ void board_init_f(ulong bootflag) int px_spd; u32 plat_ratio, bus_clk, sys_clk; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - ccsr_lbc_t *lbc = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;

#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) /* for FPGA */ - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); #else #error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined #endif diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c index ff47d55..9547d44 100644 --- a/nand_spl/nand_boot_fsl_elbc.c +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -32,7 +32,7 @@

static void nand_wait(void) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR;

for (;;) { uint32_t status = in_be32(&regs->ltesr); @@ -49,7 +49,7 @@ static void nand_wait(void)

static void nand_load(unsigned int offs, int uboot_size, uchar *dst) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; int large = in_be32(&regs->bank[0].or) & OR_FCM_PGS; int block_shift = large ? 17 : 14;

This dumps out the contents of TLB1 on 85xx-based systems.

Signed-off-by: Becky Bruce beckyb@kernel.crashing.org --- arch/powerpc/cpu/mpc85xx/tlb.c | 20 ++++++++++++++++++++ arch/powerpc/include/asm/mmu.h | 1 + 2 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index eebb6ae..f2833a5 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -74,6 +74,26 @@ void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, }

#ifndef CONFIG_NAND_SPL +void print_tlbcam(void) +{ + int i; + unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff; + + /* walk all the entries */ + printf("TLBCAM entries\n"); + for (i = 0; i < num_cam; i++) { + unsigned long epn; + u32 tsize, valid; + phys_addr_t rpn; + + read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn); + printf("entry %02d: V: %d EPN 0x%08x RPN 0x%08llx size:", + i, (valid == 0) ? 0 : 1, (unsigned int)epn, + (unsigned long long)rpn); + print_size(TSIZE_TO_BYTES(tsize), "\n"); + } +} + static inline void use_tlb_cam(u8 idx) { int i = idx / 32; diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index d4c7b75..c01c85f 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -486,6 +486,7 @@ extern void init_tlbs(void); extern int find_tlb_idx(void *addr, u8 tlbsel); extern void init_used_tlb_cams(void); extern int find_free_tlbcam(void); +extern void print_tlbcam(void);

extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);

Add printing of LAWBARH/LAWBARL for FSL_CORENET platforms.

Signed-off-by: Becky Bruce Beckyb@kernel.crashing.org --- drivers/misc/fsl_law.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 9688888..628bd59 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -193,7 +193,13 @@ void print_laws(void) printf("\nLocal Access Window Configuration\n"); for (i = 0; i < FSL_HW_NUM_LAWS; i++) { lawar = in_be32(LAWAR_ADDR(i)); +#ifdef CONFIG_FSL_CORENET + printf("LAWBARH%02d: 0x%08x LAWBARL%02d: 0x%08x", + i, in_be32(LAWBARH_ADDR(i)), + i, in_be32(LAWBARL_ADDR(i))); +#else printf("LAWBAR%02d: 0x%08x", i, in_be32(LAWBAR_ADDR(i))); +#endif printf(" LAWAR0x%02d: 0x%08x\n", i, lawar); printf("\t(EN: %d TGT: 0x%02x SIZE: ", (lawar & LAW_EN) ? 1 : 0, (lawar >> 20) & 0xff);

Each platform had its own version of the upmconfig, despite the init process being identical. Now that we have a spot for common lbc code, create a common upmconfig() there.

Signed-off-by: Becky Bruce beckyb@kernel.crashing.org --- arch/powerpc/cpu/mpc83xx/cpu.c | 66 ------------------------------------ arch/powerpc/cpu/mpc85xx/cpu.c | 61 --------------------------------- arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 51 +++++++++++++++++++++++++++ arch/powerpc/include/asm/fsl_lbc.h | 3 ++ 4 files changed, 54 insertions(+), 127 deletions(-)

diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index 24193ce..d37fc80 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -125,72 +125,6 @@ int checkcpu(void) return 0; }

- -/* - * Program a UPM with the code supplied in the table. - * - * The 'dummy' variable is used to increment the MAD. 'dummy' is - * supposed to be a pointer to the memory of the device being - * programmed by the UPM. The data in the MDR is written into - * memory and the MAD is incremented every time there's a write - * to 'dummy'. Unfortunately, the current prototype for this - * function doesn't allow for passing the address of this - * device, and changing the prototype will break a number lots - * of other code, so we need to use a round-about way of finding - * the value for 'dummy'. - * - * The value can be extracted from the base address bits of the - * Base Register (BR) associated with the specific UPM. To find - * that BR, we need to scan all 8 BRs until we find the one that - * has its MSEL bits matching the UPM we want. Once we know the - * right BR, we can extract the base address bits from it. - * - * The MxMR and the BR and OR of the chosen bank should all be - * configured before calling this function. - * - * Parameters: - * upm: 0=UPMA, 1=UPMB, 2=UPMC - * table: Pointer to an array of values to program - * size: Number of elements in the array. Must be 64 or less. - */ -void upmconfig (uint upm, uint *table, uint size) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbc_t *lbc = &immap->im_lbc; - volatile uchar *dummy = NULL; - const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ - volatile u32 *mxmr = &lbc->mamr + upm; /* ptr to mamr, mbmr, or mcmr */ - uint i; - - /* Find the address for the dummy write transaction */ - for (i = 0; i < 8; i++) { - if ((get_lbc_br(i) & BR_MSEL) == msel) { - dummy = (uchar *) (get_lbc_br(i) & BR_BA); - break; - } - } - - if (!dummy) { - printf("Error: %s() could not find matching BR\n", __FUNCTION__); - hang(); - } - - /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */ - *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000; - - for (i = 0; i < size; i++) { - lbc->mdr = table[i]; - __asm__ __volatile__ ("sync"); - *dummy = 0; /* Write the value to memory and increment MAD */ - __asm__ __volatile__ ("sync"); - while(((*mxmr & 0x3f) != ((i + 1) & 0x3f))); - } - - /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */ - *mxmr &= 0xCFFFFFC0; -} - - int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 7ab4a2a..987eae4 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -252,67 +252,6 @@ reset_85xx_watchdog(void) #endif /* CONFIG_WATCHDOG */

/* - * Configures a UPM. The function requires the respective MxMR to be set - * before calling this function. "size" is the number or entries, not a sizeof. - */ -void upmconfig (uint upm, uint * table, uint size) -{ - int i, mdr, mad, old_mad = 0; - volatile u32 *mxmr; - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - volatile u8* dummy = NULL; - int upmmask; - - switch (upm) { - case UPMA: - mxmr = &lbc->mamr; - upmmask = BR_MS_UPMA; - break; - case UPMB: - mxmr = &lbc->mbmr; - upmmask = BR_MS_UPMB; - break; - case UPMC: - mxmr = &lbc->mcmr; - upmmask = BR_MS_UPMC; - break; - default: - printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm); - hang(); - } - - /* Find the address for the dummy write transaction */ - for (i = 0; i < 8; i++) { - if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) { - dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); - break; - } - } - - if (i == 8) { - printf("Error: %s() could not find matching BR\n", __FUNCTION__); - hang(); - } - - for (i = 0; i < size; i++) { - /* 1 */ - out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i); - /* 2 */ - out_be32(&lbc->mdr, table[i]); - /* 3 */ - mdr = in_be32(&lbc->mdr); - /* 4 */ - *(volatile u8 *)dummy = 0; - /* 5 */ - do { - mad = in_be32(mxmr) & MxMR_MAD_MSK; - } while (mad <= old_mad && !(!mad && i == (size-1))); - old_mad = mad; - } - out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM); -} - -/* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() */ diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index e0a15c4..f136850 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -82,3 +82,54 @@ void init_early_memctl_regs(void) set_lbc_br(7, CONFIG_SYS_BR7_PRELIM); #endif } + +/* + * Configures a UPM. The function requires the respective MxMR to be set + * before calling this function. "size" is the number or entries, not a sizeof. + */ +void upmconfig(uint upm, uint *table, uint size) +{ + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + int i, mdr, mad, old_mad = 0; + u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK); + u32 msel = BR_UPMx_TO_MSEL(upm); + volatile u32 *mxmr = &lbc->mamr + upm; + volatile u8 *dummy = NULL; + + if (upm < UPMA || upm > UPMC) { + printf("Error: %s() Bad UPM index %d\n", __func__, upm); + hang(); + } + + /* + * Find the address for the dummy write - scan all of the BRs until we + * find one matching the UPM and extract the base address bits from it. + */ + for (i = 0; i < 8; i++) { + if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) { + dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); + break; + } + } + + if (!dummy) { + printf("Error: %s() No matching BR\n", __func__); + hang(); + } + + /* Program UPM using steps outlined by the reference manual */ + for (i = 0; i < size; i++) { + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i); + out_be32(&lbc->mdr, table[i]); + mdr = in_be32(&lbc->mdr); + *dummy = 0; + do { + mad = in_be32(mxmr) & MxMR_MAD_MSK; + } while (mad <= old_mad && !(!mad && i == (size-1))); + old_mad = mad; + } + + /* Return to normal operation */ + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM); +} + diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 33e6dd9..82d24ab 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -62,6 +62,8 @@ #define BR_V 0x00000001 #define BR_V_SHIFT 0

+#define BR_UPMx_TO_MSEL(x) ((x + 4) << BR_MSEL_SHIFT) + #define UPMA 0 #define UPMB 1 #define UPMC 2 @@ -458,6 +460,7 @@

extern void print_lbc_regs(void); extern void init_early_memctl_regs(void); +extern void upmconfig(uint upm, uint *table, uint size);

#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR) #define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br))

On Jun 1, 2010, at 10:26 AM, Peter Tyser wrote:

Hi Becky,

On Fri, 2010-05-28 at 16:45 -0500, Becky Bruce wrote:

...

--- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -76,4 +76,7 @@ /* Relocation to SDRAM works on all PPC boards */ #define CONFIG_RELOC_FIXUP_WORKS

+/* Currently all plats have a local bus controller */ +#define CONFIG_FSL_LBC

The above doesn't appear to break anything, but it seems a bit odd to define CONFIG_FSL_LBC for all PPC boards. Would it be possible to only define CONFIG_FSL_LBC and CONFIG_FSL_ELBC in config.h based on some CONFIG_MPCyyy conditionals and then get rid of patch 1/10 in this series?

Not really - the ELBC setting is quite specific and doesn't fall nicely on the lines of "MPC8qxx" vs "MPC8yxx". It needs to be in the individual configs.

The LBC setting, though is nearly universal (but is not guaranteed going forward). I can probably wrap that in a MPC86/85/83xx or something - I'll have to go check my specs to be sure I hit everyone that's affected.

-Becky

On May 31, 2010, at 12:48 PM, Remy Bohmer wrote:

Hi,

2010/5/28 Becky Bruce beckyb@kernel.crashing.org:

...

This avoids a build warning that you see if anyone in the header chain has included io.h (which is coming shortly)

Signed-off-by: Becky Bruce beckyb@kernel.crashing.org

drivers/usb/host/ohci-hcd.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci- hcd.c index b03a600..d7e5bd5 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -86,6 +86,8 @@ /*

• e.g. PCI controllers need this

*/ +#undef readl +#undef writel #ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS # define readl(a) __swap_32(*((volatile u32 *)(a))) # define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))

IMO it would be cleaner if these macros are moved to some generic header file and include that header in this file.

There was already a "ohci.h" in this directory, so I'll move it there.

Thanks, Becky