Hello everyone:

I now am able to erase flash from my u-boot build and that works. Almost there, but one rather serious problem remains. The writes to flash are not working correctly. I am using the "stock" board/lubbock/flash.c routines for the flash write.

When I attempt to write bytes into flash, the 2nd short of each long word ends up being 0xffff instead of its intended value. This same code works perfectly on my PXA-255 development system that uses the Strata 28F128J3 chips.

An important note - I see EXACTLY the same thing using "jflashmm" (to JTAG bytes into flash) unless it's writing to the very first sector - in which case it works correctly. I think this might be an important clue.

Is this possibly a PXA register settings problem?? StrataFlash experts - please throw me a bone here if you possibly can!!

Thanks in advance, craig vanderborgh voxware incorporated