[U-Boot] [PATCH 00/13] ARM: more cleanups
The following patches fix another set of build warnigns, mostly for ARM boards.
Wolfgang Denk (13): drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings drivers/net/at91_emac.c: Fix GCC 4.6 build warnings fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug) common/cmd_pxe.c: Fix compile warning boards.cfg: sort list board/apollon/apollon.c: Fix GCc 4.6 build warnings. board/apollon/sys_info.c: Fix GCC 4.6 build warning ARM: convert "apollon" board to use boards.cfg board/LaCie/edminiv2/edminiv2.c: Fix build warning board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings ARM: convert "omap16xx" boards to boards.cfg board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings ARM: convert "omap730p2" boards to boards.cfg
MAKEALL | 4 - Makefile | 41 ------- board/LaCie/edminiv2/edminiv2.c | 1 + board/apollon/apollon.c | 18 ++-- board/apollon/sys_info.c | 9 +-- board/ti/omap1610inn/flash.c | 21 ++-- board/ti/omap730p2/flash.c | 19 ++- boards.cfg | 230 ++++++++++++++++++++------------------ common/cmd_pxe.c | 1 + drivers/net/at91_emac.c | 42 ++++--- drivers/net/ne2000_base.c | 9 +- fs/yaffs2/yaffs_guts.c | 2 +- include/configs/apollon.h | 2 + 13 files changed, 189 insertions(+), 210 deletions(-)
Fix: ne2000_base.c: In function 'dp83902a_send': ne2000_base.c:282:7: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] ne2000_base.c: In function 'dp83902a_RxEvent': ne2000_base.c:376:5: warning: variable 'rsr' set but not used [-Wunused-but-set-variable] ne2000_base.c: In function 'dp83902a_TxEvent': ne2000_base.c:513:5: warning: variable 'tsr' set but not used [-Wunused-but-set-variable] ne2000_base.c: In function 'dp83902a_ClearCounters': ne2000_base.c:550:17: warning: variable 'cnt3' set but not used [-Wunused-but-set-variable] ne2000_base.c:550:11: warning: variable 'cnt2' set but not used [-Wunused-but-set-variable] ne2000_base.c:550:5: warning: variable 'cnt1' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de --- drivers/net/ne2000_base.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c index 88f2b37..8275091 100644 --- a/drivers/net/ne2000_base.c +++ b/drivers/net/ne2000_base.c @@ -76,6 +76,7 @@ Add SNMP #include <command.h> #include <net.h> #include <malloc.h> +#include <linux/compiler.h>
/* forward definition of function used for the uboot interface */ void uboot_push_packet_len(int len); @@ -279,7 +280,7 @@ dp83902a_send(u8 *data, int total_len, u32 key) * does (i.e., also read data). */
- u16 tmp; + __maybe_unused u16 tmp; int len = 1;
DP_OUT(base, DP_RSAL, 0x100 - len); @@ -373,7 +374,7 @@ dp83902a_RxEvent(void) { struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; u8 *base = dp->base; - u8 rsr; + __maybe_unused u8 rsr; u8 rcv_hdr[4]; int i, len, pkt, cur;
@@ -510,7 +511,7 @@ dp83902a_TxEvent(void) { struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; u8 *base = dp->base; - u8 tsr; + __maybe_unused u8 tsr; u32 key;
DEBUG_FUNCTION(); @@ -547,7 +548,7 @@ dp83902a_ClearCounters(void) { struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; u8 *base = dp->base; - u8 cnt1, cnt2, cnt3; + __maybe_unused u8 cnt1, cnt2, cnt3;
DP_IN(base, DP_FER, cnt1); DP_IN(base, DP_CER, cnt2);
Fix: at91_emac.c: In function 'at91emac_phy_init': at91_emac.c:244:20: warning: variable 'duplex' set but not used [-Wunused-but-set-variable] at91_emac.c:244:13: warning: variable 'speed' set but not used [-Wunused-but-set-variable]
Use new debug_cond() to fix these warnings. In the result, anumber of inconsistent printf() formats are detected:
at91_emac.c: In function 'at91emac_read': at91_emac.c:147:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'struct at91_emac_t *' [-Wformat] at91_emac.c: In function 'at91emac_write': at91_emac.c:157:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'struct at91_emac_t *' [-Wformat] at91_emac.c:157:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'short unsigned int *' [-Wformat] at91_emac.c: In function 'at91emac_recv': at91_emac.c:451:3: warning: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat] at91_emac.c:451:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat]
Fix these, too.
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Jens Scharsig js_at_ng@scharsoft.de Cc: Andreas Bießmann andreas.devel@gmail.com Cc: Reinhard Meyer u-boot@emk-elektronik.de --- drivers/net/at91_emac.c | 42 +++++++++++++++++++++++------------------- 1 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c index 9bda1fc..483c831 100644 --- a/drivers/net/at91_emac.c +++ b/drivers/net/at91_emac.c @@ -69,21 +69,21 @@ #endif
#ifdef ET_DEBUG -#define DEBUG_AT91EMAC(...) printf(__VA_ARGS__); +#define DEBUG_AT91EMAC 1 #else -#define DEBUG_AT91EMAC(...) +#define DEBUG_AT91EMAC 0 #endif
#ifdef MII_DEBUG -#define DEBUG_AT91PHY(...) printf(__VA_ARGS__); +#define DEBUG_AT91PHY 1 #else -#define DEBUG_AT91PHY(...) +#define DEBUG_AT91PHY 0 #endif
#ifndef CONFIG_DRIVER_AT91EMAC_QUIET -#define VERBOSEP(...) printf(__VA_ARGS__); +#define VERBOSEP 1 #else -#define VERBOSEP(...) +#define VERBOSEP 0 #endif
#define RBF_ADDR 0xfffffffc @@ -137,14 +137,15 @@ int at91emac_read(at91_emac_t *at91mac, unsigned char addr,
do { netstat = readl(&at91mac->sr); - DEBUG_AT91PHY("poll SR %08lx\n", netstat); + debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat); } while (!(netstat & AT91_EMAC_SR_IDLE));
*value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK;
at91emac_DisableMDIO(at91mac);
- DEBUG_AT91PHY("AT91PHY read %x REG(%d)=%x\n", at91mac, reg, *value) + debug_cond(DEBUG_AT91PHY, + "AT91PHY read %p REG(%d)=%x\n", at91mac, reg, *value);
return 0; } @@ -153,7 +154,8 @@ int at91emac_write(at91_emac_t *at91mac, unsigned char addr, unsigned char reg, unsigned short value) { unsigned long netstat; - DEBUG_AT91PHY("AT91PHY write %x REG(%d)=%x\n", at91mac, reg, &value) + debug_cond(DEBUG_AT91PHY, + "AT91PHY write %p REG(%d)=%p\n", at91mac, reg, &value);
at91emac_EnableMDIO(at91mac);
@@ -164,7 +166,7 @@ int at91emac_write(at91_emac_t *at91mac, unsigned char addr,
do { netstat = readl(&at91mac->sr); - DEBUG_AT91PHY("poll SR %08lx\n", netstat); + debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat); } while (!(netstat & AT91_EMAC_SR_IDLE));
at91emac_DisableMDIO(at91mac); @@ -216,7 +218,7 @@ static int at91emac_phy_reset(struct eth_device *netdev) adv = ADVERTISE_CSMA | ADVERTISE_ALL; at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_ADVERTISE, adv); - VERBOSEP("%s: Starting autonegotiation...\n", netdev->name); + debug_cond(VERBOSEP, "%s: Starting autonegotiation...\n", netdev->name); at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART));
@@ -229,7 +231,8 @@ static int at91emac_phy_reset(struct eth_device *netdev) }
if (status & BMSR_ANEGCOMPLETE) { - VERBOSEP("%s: Autonegotiation complete\n", netdev->name); + debug_cond(VERBOSEP, + "%s: Autonegotiation complete\n", netdev->name); } else { printf("%s: Autonegotiation timed out (status=0x%04x)\n", netdev->name, status); @@ -272,7 +275,7 @@ static int at91emac_phy_init(struct eth_device *netdev) } } if (!(status & BMSR_LSTATUS)) { - VERBOSEP("%s: link down\n", netdev->name); + debug_cond(VERBOSEP, "%s: link down\n", netdev->name); return -3; } else { at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, @@ -283,7 +286,7 @@ static int at91emac_phy_init(struct eth_device *netdev) speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0); duplex = (media & ADVERTISE_FULL) ? 1 : 0; - VERBOSEP("%s: link up, %sMbps %s-duplex\n", + debug_cond(VERBOSEP, "%s: link up, %sMbps %s-duplex\n", netdev->name, speed ? "100" : "10", duplex ? "full" : "half"); @@ -409,7 +412,7 @@ static void at91emac_halt(struct eth_device *netdev) emac = (at91_emac_t *) netdev->iobase; writel(readl(&emac->ctl) & ~(AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE), &emac->ctl); - DEBUG_AT91EMAC("halt MAC\n"); + debug_cond(DEBUG_AT91EMAC, "halt MAC\n"); }
static int at91emac_send(struct eth_device *netdev, volatile void *packet, @@ -425,7 +428,7 @@ static int at91emac_send(struct eth_device *netdev, volatile void *packet, writel(AT91_EMAC_TCR_LEN(length), &emac->tcr); while (AT91_EMAC_TCR_LEN(readl(&emac->tcr))) ; - DEBUG_AT91EMAC("Send %d \n", length); + debug_cond(DEBUG_AT91EMAC, "Send %d\n", length); writel(readl(&emac->tsr) | AT91_EMAC_TSR_COMP, &emac->tsr); return 0; } @@ -445,7 +448,7 @@ static int at91emac_recv(struct eth_device *netdev) size = rbfp->size & RBF_SIZE; NetReceive(NetRxPackets[dev->rbindex], size);
- DEBUG_AT91EMAC("Recv[%d]: %d bytes @ %x \n", + debug_cond(DEBUG_AT91EMAC, "Recv[%ld]: %d bytes @ %lx\n", dev->rbindex, size, rbfp->addr);
rbfp->addr &= ~RBF_OWNER; @@ -479,14 +482,15 @@ static int at91emac_write_hwaddr(struct eth_device *netdev) emac = (at91_emac_t *) netdev->iobase;
writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - DEBUG_AT91EMAC("init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n", + debug_cond(DEBUG_AT91EMAC, + "init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n", netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3], netdev->enetaddr[2], netdev->enetaddr[1], netdev->enetaddr[0]); writel( (netdev->enetaddr[0] | netdev->enetaddr[1] << 8 | netdev->enetaddr[2] << 16 | netdev->enetaddr[3] << 24), &emac->sa2l); writel((netdev->enetaddr[4] | netdev->enetaddr[5] << 8), &emac->sa2h); - DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", + debug_cond(DEBUG_AT91EMAC, "init MAC-ADDR %x%x\n", readl(&emac->sa2h), readl(&emac->sa2l)); return 0; }
Dear Wolfgang Denk,
In message 1323429272-26801-3-git-send-email-wd@denx.de you wrote:
Fix: at91_emac.c: In function 'at91emac_phy_init': at91_emac.c:244:20: warning: variable 'duplex' set but not used [-Wunused-but-set-variable] at91_emac.c:244:13: warning: variable 'speed' set but not used [-Wunused-but-set-variable]
Use new debug_cond() to fix these warnings. In the result, anumber of inconsistent printf() formats are detected:
at91_emac.c: In function 'at91emac_read': at91_emac.c:147:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'struct at91_emac_t *' [-Wformat] at91_emac.c: In function 'at91emac_write': at91_emac.c:157:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'struct at91_emac_t *' [-Wformat] at91_emac.c:157:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'short unsigned int *' [-Wformat] at91_emac.c: In function 'at91emac_recv': at91_emac.c:451:3: warning: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat] at91_emac.c:451:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat]
Fix these, too.
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Jens Scharsig js_at_ng@scharsoft.de Cc: Andreas Bießmann andreas.devel@gmail.com Cc: Reinhard Meyer u-boot@emk-elektronik.de
drivers/net/at91_emac.c | 42 +++++++++++++++++++++++------------------- 1 files changed, 23 insertions(+), 19 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Fix: yaffs_guts.c: In function 'yaffs_GarbageCollectBlock': yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used [-Wunused-but-set-variable]
Here GCC actually detected a bug. The code was always returning OK instead of the previously set retrun code. Fix that.
Signed-off-by: Wolfgang Denk wd@denx.de Cc: William Juul william.juul@tandberg.com Cc: Scott Wood scottwood@freescale.com --- fs/yaffs2/yaffs_guts.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/yaffs2/yaffs_guts.c b/fs/yaffs2/yaffs_guts.c index f0ef8db..7390b40 100644 --- a/fs/yaffs2/yaffs_guts.c +++ b/fs/yaffs2/yaffs_guts.c @@ -2976,7 +2976,7 @@ static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
dev->isDoingGC = 0;
- return YAFFS_OK; + return retVal; }
/* New garbage collector
Acked-by: William Juul wiljuul@cisco.com
And please note my new e-mail address.
Best regards William Juul
-----Original Message----- From: Wolfgang Denk [mailto:wd@denx.de] Sent: Friday, December 09, 2011 12:14 PM To: u-boot@lists.denx.de Cc: Wolfgang Denk; William Juul; Scott Wood Subject: [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)
Fix: yaffs_guts.c: In function 'yaffs_GarbageCollectBlock': yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used [-Wunused-but-set-variable]
Here GCC actually detected a bug. The code was always returning OK instead of the previously set retrun code. Fix that.
Signed-off-by: Wolfgang Denk wd@denx.de Cc: William Juul william.juul@tandberg.com Cc: Scott Wood scottwood@freescale.com
fs/yaffs2/yaffs_guts.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/yaffs2/yaffs_guts.c b/fs/yaffs2/yaffs_guts.c index f0ef8db..7390b40 100644 --- a/fs/yaffs2/yaffs_guts.c +++ b/fs/yaffs2/yaffs_guts.c @@ -2976,7 +2976,7 @@ static int
yaffs_GarbageCollectBlock(yaffs_Device
dev, int block)
dev->isDoingGC = 0;
- return YAFFS_OK;
- return retVal;
}
/* New garbage collector
1.7.6.4
Dear Wolfgang Denk,
In message 1323429272-26801-4-git-send-email-wd@denx.de you wrote:
Fix: yaffs_guts.c: In function 'yaffs_GarbageCollectBlock': yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used [-Wunused-but-set-variable]
Here GCC actually detected a bug. The code was always returning OK instead of the previously set retrun code. Fix that.
Signed-off-by: Wolfgang Denk wd@denx.de Cc: William Juul william.juul@tandberg.com Cc: Scott Wood scottwood@freescale.com
fs/yaffs2/yaffs_guts.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Fix: cmd_pxe.c: In function 'parse_pxefile_top': cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this function [-Wuninitialized] cmd_pxe.c:921:6: note: 'err' was declared here
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Jason Hobbs jason.hobbs@calxeda.com --- common/cmd_pxe.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index 9426f5b..eaf95bf 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -936,6 +936,7 @@ static int parse_menu(char **c, struct pxe_menu *cfg, char *b, int nest_level) default: printf("Ignoring malformed menu command: %.*s\n", (int)(*c - s), s); + err = -1; }
if (err < 0)
Dear Wolfgang,
On Fri, Dec 09, 2011 at 06:14:23AM -0500, Wolfgang Denk wrote:
Fix: cmd_pxe.c: In function 'parse_pxefile_top': cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this function [-Wuninitialized] cmd_pxe.c:921:6: note: 'err' was declared here
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Jason Hobbs jason.hobbs@calxeda.com
common/cmd_pxe.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index 9426f5b..eaf95bf 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -936,6 +936,7 @@ static int parse_menu(char **c, struct pxe_menu *cfg, char *b, int nest_level) default: printf("Ignoring malformed menu command: %.*s\n", (int)(*c - s), s);
err = -1;
err should either be set to 0 here, or initialized to 0 at the top of the function. Setting it to -1 will cause the parser to give up rather than just printing out the warning message. It doesn't have to give up, and not giving up makes the parser more accommodating of pxelinux commands that aren't supported in U-Boot.
Thanks, Jason
Dear Jason,
In message 20111209134819.GA26840@jhobbs-laptop you wrote:
default: printf("Ignoring malformed menu command: %.*s\n", (int)(*c - s), s);
err = -1;err should either be set to 0 here, or initialized to 0 at the top of the function. Setting it to -1 will cause the parser to give up rather than just printing out the warning message. It doesn't have to give up, and not giving up makes the parser more accommodating of pxelinux commands that aren't supported in U-Boot.
You have way more experience with PXE than me, but if we runinto this case, doesn't that mean that the whole menu setup is severely broken, and continuing is more or less invoking random behaviour?
If you really want to see a 0 here, then please feel free to submit an updated / fixed patch.
Thanks.
Best regards,
Wolfgang Denk
On Fri, Dec 09, 2011 at 03:45:44PM -0500, Wolfgang Denk wrote:
Dear Jason,
In message 20111209134819.GA26840@jhobbs-laptop you wrote:
default: printf("Ignoring malformed menu command: %.*s\n", (int)(*c - s), s);
err = -1;err should either be set to 0 here, or initialized to 0 at the top of the function. Setting it to -1 will cause the parser to give up rather than just printing out the warning message. It doesn't have to give up, and not giving up makes the parser more accommodating of pxelinux commands that aren't supported in U-Boot.
You have way more experience with PXE than me, but if we runinto this case, doesn't that mean that the whole menu setup is severely broken, and continuing is more or less invoking random behaviour?
It only means that an unrecognized menu command was used. It could be something aesthetic in nature, like a menu title command.
If you really want to see a 0 here, then please feel free to submit an updated / fixed patch.
Heiko Schocher ended up sending a patch to do this today, which I've acked.
Thanks,
Jason
Signed-off-by: Wolfgang Denk wd@denx.de --- boards.cfg | 218 ++++++++++++++++++++++++++++++------------------------------ 1 files changed, 109 insertions(+), 109 deletions(-)
diff --git a/boards.cfg b/boards.cfg index 12f5f6f..4a4968d 100644 --- a/boards.cfg +++ b/boards.cfg @@ -36,13 +36,13 @@ ###########################################################################################################
integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp:CM1136 -qong arm arm1136 - davedenx mx31 -mx31ads arm arm1136 - freescale mx31 -imx31_litekit arm arm1136 - logicpd mx31 imx31_phycore arm arm1136 - - mx31 imx31_phycore_eet arm arm1136 imx31_phycore - mx31 imx31_phycore:IMX31_PHYCORE_EET +qong arm arm1136 - davedenx mx31 +mx31ads arm arm1136 - freescale mx31 mx31pdk arm arm1136 - freescale mx31 mx31pdk:NAND_U_BOOT tt01 arm arm1136 - hale mx31 +imx31_litekit arm arm1136 - logicpd mx31 flea3 arm arm1136 - CarMediaLab mx35 mx35pdk arm arm1136 - freescale mx35 omap2420h4 arm arm1136 - ti omap24xx @@ -65,51 +65,40 @@ smdk2410 arm arm920t - samsung omap1510inn arm arm925t - ti integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap:CM926EJ_S integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp:CM924EJ_S -versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB -versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB -versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB aspenite arm arm926ejs - Marvell armada100 gplugd arm arm926ejs - Marvell armada100 afeb9260 arm arm926ejs - - at91 -at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0 at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1 -at91sam9261ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_NANDFLASH +at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH at91sam9261ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS0 at91sam9261ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS3 -at91sam9263ek_nandflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NANDFLASH -at91sam9263ek_dataflash_cs0 arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH +at91sam9261ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_NANDFLASH at91sam9263ek_dataflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH +at91sam9263ek_dataflash_cs0 arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH +at91sam9263ek_nandflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NANDFLASH at91sam9263ek_norflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NORFLASH at91sam9263ek_norflash_boot arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_BOOT_NORFLASH -at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH at91sam9g10ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS0 at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS3 -at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH +at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 +at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH -at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH -at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH +at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1 +at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260 snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20 -sbc35_a9g20_nandflash arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH sbc35_a9g20_eeprom arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_EEPROM -tny_a9g20_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH -tny_a9g20_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_EEPROM -tny_a9260_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH +sbc35_a9g20_nandflash arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH tny_a9260_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_EEPROM -cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260 -cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT -cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M -cpu9260_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M,NANDBOOT -cpu9G20 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20 -cpu9G20_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,NANDBOOT -cpu9G20_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M -cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT +tny_a9260_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH +tny_a9g20_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_EEPROM +tny_a9g20_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH ethernut5 arm arm926ejs ethernut5 egnite at91 ethernut5:AT91SAM9XE top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000 top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000 @@ -117,17 +106,21 @@ meesc arm arm926ejs meesc esd meesc_dataflash arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_DATAFLASH otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH +cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260 +cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M +cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT +cpu9260_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M,NANDBOOT +cpu9G20 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20 +cpu9G20_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M +cpu9G20_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,NANDBOOT +cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261 pm9263 arm arm926ejs pm9263 ronetix at91 pm9263:AT91SAM9263 pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45 +cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx da830evm arm arm926ejs da8xxevm davinci davinci -da850evm arm arm926ejs da8xxevm davinci davinci da850_am18xxevm arm arm926ejs da8xxevm davinci davinci -cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx -hawkboard arm arm926ejs da8xxevm davinci davinci -hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT -hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT -ea20 arm arm926ejs ea20 davinci davinci +da850evm arm arm926ejs da8xxevm davinci davinci davinci_dm355evm arm arm926ejs dm355evm davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci davinci_dm365evm arm arm926ejs dm365evm davinci davinci @@ -137,6 +130,10 @@ davinci_dvevm arm arm926ejs dvevm davinci davinci_schmoogie arm arm926ejs schmoogie davinci davinci davinci_sffsdr arm arm926ejs sffsdr davinci davinci davinci_sonata arm arm926ejs sonata davinci davinci +ea20 arm arm926ejs ea20 davinci davinci +hawkboard arm arm926ejs da8xxevm davinci davinci +hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT +hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT enbw_cmc arm arm926ejs enbw_cmc enbw davinci km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX @@ -144,8 +141,8 @@ mgcoge3un arm arm926ejs km_arm keymile portl2 arm arm926ejs km_arm keymile kirkwood inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2 net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 -netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 +netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood @@ -167,11 +164,14 @@ nhk8815_onenand arm arm926ejs nhk8815 st omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon +versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB +versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB +versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd -highbank arm armv7 highbank - highbank am335x_evm arm armv7 am335x ti am33xx +highbank arm armv7 highbank - highbank efikamx arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg efikasb arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg @@ -183,14 +183,14 @@ vision2 arm armv7 vision2 ttcontr cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 +dig297 arm armv7 dig297 comelit omap3 igep0020 arm armv7 igep0020 isee omap3 igep0030 arm armv7 igep0030 isee omap3 -am3517_crane arm armv7 am3517crane ti omap3 am3517_evm arm armv7 am3517evm logicpd omap3 -dig297 arm armv7 dig297 comelit omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 omap3_zoom2 arm armv7 zoom2 logicpd omap3 omap3_mvblx arm armv7 mvblx matrix_vision omap3 +am3517_crane arm armv7 am3517crane ti omap3 omap3_beagle arm armv7 beagle ti omap3 omap3_evm arm armv7 evm ti omap3 omap3_evm_quick_mmc arm armv7 evm ti omap3 @@ -209,15 +209,14 @@ harmony arm armv7 harmony nvidia seaboard arm armv7 seaboard nvidia tegra2 u8500_href arm armv7 u8500 st-ericsson u8500 actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 -actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8 actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB +actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8 actux1_8_32 arm ixp actux1 - - actux1:FLASH1X8,RAM_32MB actux2 arm ixp actux3 arm ixp actux4 arm ixp dvlhost arm ixp balloon3 arm pxa -colibri_pxa270 arm pxa - toradex lubbock arm pxa palmld arm pxa palmtc arm pxa @@ -229,6 +228,7 @@ vpac270_nor_256 arm pxa vpac270 - vpac270_ond_256 arm pxa vpac270 - - vpac270:ONENAND,RAM_256M xaeniax arm pxa zipitz2 arm pxa +colibri_pxa270 arm pxa - toradex jornada arm sa1100 atngw100 avr32 at32ap - atmel at32ap700x atstk1002 avr32 at32ap atstk1000 atmel at32ap700x @@ -271,11 +271,14 @@ ibf-dsp561 blackfin blackfin ip04 blackfin blackfin tcm-bf518 blackfin blackfin tcm-bf537 blackfin blackfin -eNET x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x38040000 -eNET_SRAM x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x19000000 -sandbox sandbox sandbox sandbox sandbox - +M52277EVB m68k mcf5227x m52277evb freescale - M52277EVB:SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000 +M52277EVB_stmicro m68k mcf5227x m52277evb freescale - M52277EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000 +M5235EVB m68k mcf523x m5235evb freescale - M5235EVB:SYS_TEXT_BASE=0xFFE00000 +M5235EVB_Flash32 m68k mcf523x m5235evb freescale - M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000 cobra5272 m68k mcf52x2 cobra5272 - idmr m68k mcf52x2 +EB-MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xFFE00000 +EB-MCF-EV123_internal m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xF0000000 TASREG m68k mcf52x2 tasreg esd M5208EVBE m68k mcf52x2 m5208evbe freescale M5249EVB m68k mcf52x2 m5249evb freescale @@ -285,24 +288,18 @@ M5271EVB m68k mcf52x2 m5271evb freesca M5272C3 m68k mcf52x2 m5272c3 freescale M5275EVB m68k mcf52x2 m5275evb freescale M5282EVB m68k mcf52x2 m5282evb freescale -M52277EVB m68k mcf5227x m52277evb freescale - M52277EVB:SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000 -M52277EVB_stmicro m68k mcf5227x m52277evb freescale - M52277EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000 -EB-MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xFFE00000 -EB-MCF-EV123_internal m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xF0000000 -M5235EVB m68k mcf523x m5235evb freescale - M5235EVB:SYS_TEXT_BASE=0xFFE00000 -M5235EVB_Flash32 m68k mcf523x m5235evb freescale - M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000 -M54455EVB m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333 -M54455EVB_intel m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333 -M54455EVB_a66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666 -M54455EVB_i66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666 -M54455EVB_stm33 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333 -M54451EVB m68k mcf5445x m54451evb freescale - M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000 -M54451EVB_stmicro m68k mcf5445x m54451evb freescale - M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000 astro_mcf5373l m68k mcf532x mcf5373l astro M53017EVB m68k mcf532x m53017evb freescale M5329AFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=0 M5329BFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=16 M5373EVB m68k mcf532x m5373evb freescale - M5373EVB:NANDFLASH_SIZE=16 +M54451EVB m68k mcf5445x m54451evb freescale - M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000 +M54451EVB_stmicro m68k mcf5445x m54451evb freescale - M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000 +M54455EVB m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333 +M54455EVB_a66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666 +M54455EVB_i66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666 +M54455EVB_intel m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333 +M54455EVB_stm33 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333 M5475AFE m68k mcf547x_8x m547xevb freescale - M5475EVB:SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64 M5475BFE m68k mcf547x_8x m547xevb freescale - M5475EVB:SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16 M5475CFE m68k mcf547x_8x m547xevb freescale - M5475EVB:SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL @@ -319,35 +316,35 @@ M5485FFE m68k mcf547x_8x m548xevb freescale - M5485GFE m68k mcf547x_8x m548xevb freescale - M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64 M5485HFE m68k mcf547x_8x m548xevb freescale - M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO microblaze-generic microblaze microblaze microblaze-generic xilinx +qemu_mips mips mips32 qemu-mips - - qemu-mips +tb0229 mips mips32 +vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM +vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC +vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND +vct_platinumavc_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE +vct_platinumavc_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE +vct_platinum_onenand mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND +vct_platinum_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE +vct_platinum_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_SMALL_IMAGE +vct_premium mips mips32 vct micronas - vct:VCT_PREMIUM +vct_premium_onenand mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND +vct_premium_onenand_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE +vct_premium_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE dbau1000 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1000 dbau1100 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1100 dbau1500 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1500 dbau1550 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550 dbau1550_el mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550 gth2 mips mips32 - - au1x00 +pb1000 mips mips32 pb1x00 - au1x00 pb1x00:PB1000 incaip mips mips32 incaip - incaip incaip_100MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=100000000 incaip_133MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=133000000 incaip_150MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=150000000 -pb1000 mips mips32 pb1x00 - au1x00 pb1x00:PB1000 -qemu_mips mips mips32 qemu-mips - - qemu-mips -tb0229 mips mips32 -vct_premium mips mips32 vct micronas - vct:VCT_PREMIUM -vct_premium_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE -vct_premium_onenand mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND -vct_premium_onenand_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE -vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM -vct_platinum_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_SMALL_IMAGE -vct_platinum_onenand mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND -vct_platinum_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE -vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC -vct_platinumavc_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE -vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND -vct_platinumavc_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE qi_lb60 mips xburst qi_lb60 qi -nios2-generic nios2 nios2 nios2-generic altera adp-ag101 nds32 n1213 adp-ag101 AndesTech ag101 adp-ag101p nds32 n1213 adp-ag101p AndesTech ag101 +nios2-generic nios2 nios2 nios2-generic altera PCI5441 nios2 nios2 pci5441 psyent PK1C20 nios2 nios2 pk1c20 psyent EVB64260 powerpc 74xx_7xx evb64260 - - EVB64260 @@ -375,10 +372,6 @@ a4m072 powerpc mpc5xxx a4m072 BC3450 powerpc mpc5xxx bc3450 canmb powerpc mpc5xxx cm5200 powerpc mpc5xxx -digsy_mtc powerpc mpc5xxx digsy_mtc intercontrol -digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000 -digsy_mtc_rev5 powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:DIGSY_REV5 -digsy_mtc_rev5_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5 galaxy5200 powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200 galaxy5200_LOWBOOT powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200_LOWBOOT icecube_5200 powerpc mpc5xxx icecube - - IceCube @@ -426,6 +419,10 @@ TOP5200 powerpc mpc5xxx top5200 emk cpci5200 powerpc mpc5xxx - esd mecp5200 powerpc mpc5xxx - esd pf5200 powerpc mpc5xxx - esd +digsy_mtc powerpc mpc5xxx digsy_mtc intercontrol +digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000 +digsy_mtc_rev5 powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:DIGSY_REV5 +digsy_mtc_rev5_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5 hmi1001 powerpc mpc5xxx - manroland mucmc52 powerpc mpc5xxx - manroland uc101 powerpc mpc5xxx - manroland @@ -561,16 +558,16 @@ MPC8349EMDS powerpc mpc83xx mpc8349emds freesca MPC8349ITX powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX MPC8349ITXGP powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000 MPC8349ITX_LOWBOOT powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX,SYS_TEXT_BASE=0xFE000000 -MPC8360EMDS_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ MPC8360EMDS_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ -MPC8360EMDS_66_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1 MPC8360EMDS_33_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1 -MPC8360EMDS_66_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1 MPC8360EMDS_33_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PCI,PCI_33M,PQ_MDS_PIB=1 -MPC8360EMDS_66_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_66M,PQ_MDS_PIB=1 MPC8360EMDS_33_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PCI,PCI_66M,PQ_MDS_PIB=1 -MPC8360EMDS_66_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCISLAVE MPC8360EMDS_33_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PCI,PCISLAVE +MPC8360EMDS_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ +MPC8360EMDS_66_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1 +MPC8360EMDS_66_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1 +MPC8360EMDS_66_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_66M,PQ_MDS_PIB=1 +MPC8360EMDS_66_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCISLAVE MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK MPC8360ERDK_33 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK:CLKIN_33MHZ MPC8360ERDK_66 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK @@ -578,15 +575,15 @@ MPC837XEMDS powerpc mpc83xx mpc837xemds freesca MPC837XEMDS_HOST powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS:PCI MPC837XERDB powerpc mpc83xx mpc837xerdb freescale kmeter1 powerpc mpc83xx km83xx keymile +kmsupx5 powerpc mpc83xx km83xx keymile +suvd3 powerpc mpc83xx km83xx keymile +tuda1 powerpc mpc83xx km83xx keymile +tuxa1 powerpc mpc83xx km83xx keymile MERGERBOX powerpc mpc83xx mergerbox matrix_vision MVBLM7 powerpc mpc83xx mvblm7 matrix_vision SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP -kmsupx5 powerpc mpc83xx km83xx keymile -suvd3 powerpc mpc83xx km83xx keymile TQM834x powerpc mpc83xx tqm834x tqc -tuda1 powerpc mpc83xx km83xx keymile -tuxa1 powerpc mpc83xx km83xx keymile sbc8540 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540 @@ -621,20 +618,20 @@ MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freesca MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND -P1010RDB_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB -P1010RDB_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SECURE_BOOT +P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND +P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT P1010RDB_36BIT_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT P1010RDB_36BIT_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SECURE_BOOT +P1010RDB_36BIT_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SDCARD +P1010RDB_36BIT_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH +P1010RDB_36BIT_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH,SECURE_BOOT P1010RDB_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,NAND P1010RDB_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,NAND_SECBOOT,SECURE_BOOT -P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND -P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT +P1010RDB_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB +P1010RDB_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SECURE_BOOT P1010RDB_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SDCARD P1010RDB_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SPIFLASH P1010RDB_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SPIFLASH,SECURE_BOOT -P1010RDB_36BIT_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SDCARD -P1010RDB_36BIT_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH -P1010RDB_36BIT_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH,SECURE_BOOT P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB P1011RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT P1011RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT,SDCARD @@ -644,35 +641,35 @@ P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freesca P1011RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SPIFLASH P1020MBG-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG P1020MBG-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,36BIT -P1020MBG-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD P1020MBG-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD,36BIT +P1020MBG-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD P1020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SPIFLASH P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND -P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD -P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB -P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND -P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD -P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,NAND P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SDCARD P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SPIFLASH +P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND +P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD +P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH +P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD +P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH P1020UTM-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM -P1020UTM-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,SDCARD P1020UTM-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT P1020UTM-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT,SDCARD +P1020UTM-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,SDCARD P1021RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB -P1021RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,NAND -P1021RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SDCARD -P1021RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SPIFLASH P1021RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT P1021RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,NAND P1021RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,SDCARD P1021RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,SPIFLASH +P1021RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,NAND +P1021RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SDCARD +P1021RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SPIFLASH P1022DS powerpc mpc85xx p1022ds freescale P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT P1023RDS powerpc mpc85xx p1023rds freescale - P1023RDS @@ -694,6 +691,8 @@ P2010RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freesca P2010RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,NAND P2010RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SDCARD P2010RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SPIFLASH +P2020COME_SDCARD powerpc mpc85xx p2020come freescale - P2020COME:SDCARD +P2020COME_SPIFLASH powerpc mpc85xx p2020come freescale - P2020COME:SPIFLASH P2020DS powerpc mpc85xx p2020ds freescale P2020DS_36BIT powerpc mpc85xx p2020ds freescale - P2020DS:36BIT P2020DS_DDR2 powerpc mpc85xx p2020ds freescale - P2020DS:DDR2 @@ -704,18 +703,16 @@ P2020RDB_36BIT powerpc mpc85xx p1_p2_rdb freesca P2020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SDCARD P2020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SPIFLASH P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,NAND -P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD -P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH P2020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB -P2020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,NAND -P2020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SDCARD -P2020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SPIFLASH P2020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT P2020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,NAND P2020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,SDCARD P2020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,SPIFLASH -P2020COME_SDCARD powerpc mpc85xx p2020come freescale - P2020COME:SDCARD -P2020COME_SPIFLASH powerpc mpc85xx p2020come freescale - P2020COME:SPIFLASH +P2020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,NAND +P2020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SDCARD +P2020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SPIFLASH +P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD +P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH P2041RDB powerpc mpc85xx p2041rdb freescale P2041RDB_SDCARD powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 P2041RDB_SECURE_BOOT powerpc mpc85xx p2041rdb freescale - P2041RDB:SECURE_BOOT @@ -973,6 +970,7 @@ xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1 xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC +sandbox sandbox sandbox sandbox sandbox - rsk7203 sh sh2 rsk7203 renesas - rsk7264 sh sh2 rsk7264 renesas - mpr2 sh sh3 mpr2 - - @@ -982,18 +980,20 @@ espt sh sh4 espt - ms7722se sh sh4 ms7722se - - ms7750se sh sh4 ms7750se - - ap325rxa sh sh4 ap325rxa renesas - +ecovec sh sh4 ecovec renesas - +MigoR sh sh4 MigoR renesas - r2dplus sh sh4 r2dplus renesas - r7780mp sh sh4 r7780mp renesas - sh7757lcr sh sh4 sh7757lcr renesas - sh7763rdp sh sh4 sh7763rdp renesas - sh7785lcr sh sh4 sh7785lcr renesas - sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1 -MigoR sh sh4 MigoR renesas - -ecovec sh sh4 ecovec renesas - grsim_leon2 sparc leon2 - gaisler gr_cpci_ax2000 sparc leon3 - gaisler gr_ep2s60 sparc leon3 - gaisler grsim sparc leon3 - gaisler gr_xc3s_1500 sparc leon3 - gaisler +eNET x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x38040000 +eNET_SRAM x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x19000000 # Target ARCH CPU Board name Vendor SoC Options ########################################################################################################################
Dear Wolfgang Denk,
In message 1323429272-26801-6-git-send-email-wd@denx.de you wrote:
Signed-off-by: Wolfgang Denk wd@denx.de
boards.cfg | 218 ++++++++++++++++++++++++++++++------------------------------ 1 files changed, 109 insertions(+), 109 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
maybe we should have mkconfig automatically do this ? -mike
Dear Mike Frysinger,
In message 201112101739.26972.vapier@gentoo.org you wrote:
maybe we should have mkconfig automatically do this ?
No. Automatic scripts should never meddle with source files.
Best regards,
Wolfgang Denk
Fix: apollon.c: In function 'dram_init': apollon.c:188:29: warning: variable 'cpu' set but not used [-Wunused-but-set-variable] apollon.c:188:20: warning: variable 'rev' set but not used [-Wunused-but-set-variable] apollon.c:187:26: warning: variable 'size1' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kyungmin Park kyungmin.park@samsung.com --- board/apollon/apollon.c | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c index 4768f58..76626f0 100644 --- a/board/apollon/apollon.c +++ b/board/apollon/apollon.c @@ -184,14 +184,12 @@ eth_reset_err_out: **********************************************/ int dram_init(void) { - unsigned int size0 = 0, size1 = 0; - u32 mtype, btype, rev = 0, cpu = 0; + unsigned int size; + u32 mtype, btype; #define NOT_EARLY 0
btype = get_board_type(); mtype = get_mem_type(); - rev = get_cpu_rev(); - cpu = get_cpu_type();
display_board_info(btype);
@@ -200,14 +198,16 @@ int dram_init(void) do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); }
- size0 = get_sdr_cs_size(SDRC_CS0_OSET); - size1 = get_sdr_cs_size(SDRC_CS1_OSET); + size = get_sdr_cs_size(SDRC_CS0_OSET);
gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[0].size = size; #if CONFIG_NR_DRAM_BANKS > 1 - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0; - gd->bd->bi_dram[1].size = size1; + size = get_sdr_cs_size(SDRC_CS1_OSET); + + gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start + + gd->bd->bi_dram[0].size; + gd->bd->bi_dram[1].size = size; #endif
return 0;
Dear Wolfgang Denk,
In message 1323429272-26801-7-git-send-email-wd@denx.de you wrote:
Fix: apollon.c: In function 'dram_init': apollon.c:188:29: warning: variable 'cpu' set but not used [-Wunused-but-set-variable] apollon.c:188:20: warning: variable 'rev' set but not used [-Wunused-but-set-variable] apollon.c:187:26: warning: variable 'size1' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kyungmin Park kyungmin.park@samsung.com
board/apollon/apollon.c | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Fix: sys_info.c: In function 'display_board_info': sys_info.c:260:16: warning: variable 'db_s' set but not used [-Wunused-but-set-variable]
Also fix resulting warnings: sys_info.c:251:7: warning: unused variable 'db_ip' [-Wunused-variable] sys_info.c:250:7: warning: unused variable 'db_men' [-Wunused-variable]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kyungmin Park kyungmin.park@samsung.com --- board/apollon/sys_info.c | 9 +-------- 1 files changed, 1 insertions(+), 8 deletions(-)
diff --git a/board/apollon/sys_info.c b/board/apollon/sys_info.c index 26ac9a2..4f950ae 100644 --- a/board/apollon/sys_info.c +++ b/board/apollon/sys_info.c @@ -247,8 +247,6 @@ void display_board_info(u32 btype) char cpu_2420[] = "2420"; /* cpu type */ char cpu_2422[] = "2422"; char cpu_2423[] = "2423"; - char db_men[] = "Menelaus"; /* board type */ - char db_ip[] = "IP"; char mem_sdr[] = "mSDR"; /* memory type */ char mem_ddr[] = "mDDR"; char t_tst[] = "TST"; /* security level */ @@ -257,7 +255,7 @@ void display_board_info(u32 btype) char t_gp[] = "GP"; char unk[] = "?";
- char *cpu_s, *db_s, *mem_s, *sec_s; + char *cpu_s, *mem_s, *sec_s; u32 cpu, rev, sec;
rev = get_cpu_rev(); @@ -276,11 +274,6 @@ void display_board_info(u32 btype) else cpu_s = cpu_2420;
- if (btype == BOARD_H4_MENELAUS) - db_s = db_men; - else - db_s = db_ip; - switch (sec) { case TST_DEVICE: sec_s = t_tst;
Dear Wolfgang Denk,
In message 1323429272-26801-8-git-send-email-wd@denx.de you wrote:
Fix: sys_info.c: In function 'display_board_info': sys_info.c:260:16: warning: variable 'db_s' set but not used [-Wunused-but-set-variable]
Also fix resulting warnings: sys_info.c:251:7: warning: unused variable 'db_ip' [-Wunused-variable] sys_info.c:250:7: warning: unused variable 'db_men' [-Wunused-variable]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kyungmin Park kyungmin.park@samsung.com
board/apollon/sys_info.c | 9 +-------- 1 files changed, 1 insertions(+), 8 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kyungmin Park kyungmin.park@samsung.com Cc: Albert Aribaud albert.u.boot@aribaud.net --- MAKEALL | 1 - Makefile | 10 ---------- boards.cfg | 1 + include/configs/apollon.h | 2 ++ 4 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/MAKEALL b/MAKEALL index 21b573a..0f7b820 100755 --- a/MAKEALL +++ b/MAKEALL @@ -317,7 +317,6 @@ LIST_ARM9="$(boards_by_cpu arm920t) \ ## ARM11 Systems ######################################################################### LIST_ARM11="$(boards_by_cpu arm1136) \ - apollon \ imx31_phycore \ imx31_phycore_eet \ mx31pdk \ diff --git a/Makefile b/Makefile index de65a17..e603b9a 100644 --- a/Makefile +++ b/Makefile @@ -708,16 +708,6 @@ scpu_config: unconfig @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
######################################################################### -## ARM1136 Systems -######################################################################### - -apollon_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h - @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx - -######################################################################### ## ARM1176 Systems ######################################################################### smdk6400_noUSB_config \ diff --git a/boards.cfg b/boards.cfg index 4a4968d..c1b0bad 100644 --- a/boards.cfg +++ b/boards.cfg @@ -45,6 +45,7 @@ tt01 arm arm1136 - hale imx31_litekit arm arm1136 - logicpd mx31 flea3 arm arm1136 - CarMediaLab mx35 mx35pdk arm arm1136 - freescale mx35 +apollon arm arm1136 apollon - omap24xx omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x integratorap_cm720t arm arm720t integrator armltd - integratorap:CM720T diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 7fcf437..8f06cd7 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -37,6 +37,8 @@ #define CONFIG_APOLLON 1 #define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */
+#define CONFIG_ONENAND_U_BOOT y + /* Clock config to target*/ #define PRCM_CONFIG_I 1 /* #define PRCM_CONFIG_II 1 */
Dear Wolfgang Denk,
In message 1323429272-26801-9-git-send-email-wd@denx.de you wrote:
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kyungmin Park kyungmin.park@samsung.com Cc: Albert Aribaud albert.u.boot@aribaud.net
MAKEALL | 1 - Makefile | 10 ---------- boards.cfg | 1 + include/configs/apollon.h | 2 ++ 4 files changed, 3 insertions(+), 11 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Fix: edminiv2.c: In function 'reset_phy': edminiv2.c:98:2: warning: implicit declaration of function 'mv_phy_88e1116_init' [-Wimplicit-function-declaration]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Albert ARIBAUD albert.u.boot@aribaud.net --- board/LaCie/edminiv2/edminiv2.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index c1a01bc..1b33875 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -27,6 +27,7 @@ #include <common.h> #include <miiphy.h> #include <asm/arch/orion5x.h> +#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
On Fri, Dec 09, 2011 at 12:14:28PM +0100, Wolfgang Denk wrote:
Fix: edminiv2.c: In function 'reset_phy': edminiv2.c:98:2: warning: implicit declaration of function 'mv_phy_88e1116_init' [-Wimplicit-function-declaration]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Albert ARIBAUD albert.u.boot@aribaud.net
board/LaCie/edminiv2/edminiv2.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index c1a01bc..1b33875 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -27,6 +27,7 @@ #include <common.h> #include <miiphy.h> #include <asm/arch/orion5x.h> +#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
My bad.
Acked-by: Simon Guinot simon.guinot@sequanux.org
-- 1.7.6.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang Denk,
In message 1323429272-26801-10-git-send-email-wd@denx.de you wrote:
Fix: edminiv2.c: In function 'reset_phy': edminiv2.c:98:2: warning: implicit declaration of function 'mv_phy_88e1116_init' [-Wimplicit-function-declaration]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Albert ARIBAUD albert.u.boot@aribaud.net
board/LaCie/edminiv2/edminiv2.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Fix: flash.c: In function 'flash_get_offsets': flash.c:139:10: warning: variable 'pOrgDef' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase': flash.c:280:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:456:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de --- board/ti/omap1610inn/flash.c | 21 +++++++++++++-------- 1 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/board/ti/omap1610inn/flash.c b/board/ti/omap1610inn/flash.c index 1b67d08..a99a91c 100644 --- a/board/ti/omap1610inn/flash.c +++ b/board/ti/omap1610inn/flash.c @@ -136,9 +136,7 @@ void flash_unlock(flash_info_t * info) static void flash_get_offsets (ulong base, flash_info_t * info) { int i; - OrgDef *pOrgDef;
- pOrgDef = OrgIntel_28F256L18T; if (info->flash_id == FLASH_UNKNOWN) { return; } @@ -352,6 +350,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf (" done\n"); } } + if (flag) + enable_interrupts(); + return rcode; }
@@ -453,13 +454,13 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) { FPWV *addr = (FPWV *) dest; ulong status; - int flag; + int flag, rc = 0; ulong start;
/* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return (2); + printf("not erased at %08lx (%x)\n", (ulong) addr, *addr); + return 2; } /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -472,12 +473,16 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); + rc = 1; + goto done; } } +done: + if (flag) + enable_interrupts(); + *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); + return rc; }
void inline spin_wheel (void)
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk wd@denx.de wrote:
Fix: flash.c: In function 'flash_get_offsets': flash.c:139:10: warning: variable 'pOrgDef' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase': flash.c:280:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:456:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de
Acked-by: Tom Rini trini@ti.com
board/ti/omap1610inn/flash.c | 21 +++++++++++++-------- 1 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/board/ti/omap1610inn/flash.c b/board/ti/omap1610inn/flash.c index 1b67d08..a99a91c 100644 --- a/board/ti/omap1610inn/flash.c +++ b/board/ti/omap1610inn/flash.c @@ -136,9 +136,7 @@ void flash_unlock(flash_info_t * info) static void flash_get_offsets (ulong base, flash_info_t * info) { int i;
OrgDef *pOrgDef;
pOrgDef = OrgIntel_28F256L18T;
if (info->flash_id == FLASH_UNKNOWN) { return; } @@ -352,6 +350,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf (" done\n"); } }
- if (flag)
- enable_interrupts();
return rcode; }
@@ -453,13 +454,13 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) { FPWV *addr = (FPWV *) dest; ulong status;
- int flag;
- int flag, rc = 0;
ulong start;
/* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
- printf("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return 2;
} /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -472,12 +473,16 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- rc = 1;
- goto done;
} } +done:
- if (flag)
- enable_interrupts();
*addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (0);
- return rc;
}
void inline spin_wheel (void)
1.7.6.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang Denk,
In message 1323429272-26801-11-git-send-email-wd@denx.de you wrote:
Fix: flash.c: In function 'flash_get_offsets': flash.c:139:10: warning: variable 'pOrgDef' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase': flash.c:280:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:456:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de
board/ti/omap1610inn/flash.c | 21 +++++++++++++-------- 1 files changed, 13 insertions(+), 8 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kshitij Gupta kshitij@ti.com --- MAKEALL | 2 -- Makefile | 20 -------------------- boards.cfg | 8 ++++++++ 3 files changed, 8 insertions(+), 22 deletions(-)
diff --git a/MAKEALL b/MAKEALL index 0f7b820..c2b52d0 100755 --- a/MAKEALL +++ b/MAKEALL @@ -308,8 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)" LIST_ARM9="$(boards_by_cpu arm920t) \ $(boards_by_cpu arm926ejs) \ $(boards_by_cpu arm925t) \ - omap1610h2 \ - omap1610inn \ omap730p2 \ "
diff --git a/Makefile b/Makefile index e603b9a..8474ce7 100644 --- a/Makefile +++ b/Makefile @@ -646,26 +646,6 @@ ucname = $(shell echo $(1) | sed -e 's/(.*)_config/\U\1/') # ARM #========================================================================
-xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) - -omap1610inn_config \ -omap1610inn_cs0boot_config \ -omap1610inn_cs3boot_config \ -omap1610inn_cs_autoboot_config \ -omap1610h2_config \ -omap1610h2_cs0boot_config \ -omap1610h2_cs3boot_config \ -omap1610h2_cs_autoboot_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _cs0boot_, $@)" ] ; then \ - echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ - elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ - echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ - else \ - echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - fi; - @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap - omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig diff --git a/boards.cfg b/boards.cfg index c1b0bad..b9cc705 100644 --- a/boards.cfg +++ b/boards.cfg @@ -162,6 +162,14 @@ magnesium arm arm926ejs imx27lite logicpd m28evk arm arm926ejs - denx mx28 nhk8815 arm arm926ejs nhk8815 st nomadik nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND +omap1610h2 arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610h2_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn:CS0_BOOT +omap1610h2_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610h2_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT +omap1610inn arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610inn_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn:CS0_BOOT +omap1610inn_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610inn_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk wd@denx.de wrote:
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kshitij Gupta kshitij@ti.com
Acked-by: Tom Rini trini@ti.com
MAKEALL | 2 -- Makefile | 20 -------------------- boards.cfg | 8 ++++++++ 3 files changed, 8 insertions(+), 22 deletions(-)
diff --git a/MAKEALL b/MAKEALL index 0f7b820..c2b52d0 100755 --- a/MAKEALL +++ b/MAKEALL @@ -308,8 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)" LIST_ARM9="$(boards_by_cpu arm920t) \ $(boards_by_cpu arm926ejs) \ $(boards_by_cpu arm925t) \
- omap1610h2 \
- omap1610inn \
omap730p2 \ "
diff --git a/Makefile b/Makefile index e603b9a..8474ce7 100644 --- a/Makefile +++ b/Makefile @@ -646,26 +646,6 @@ ucname = $(shell echo $(1) | sed -e 's/(.*)_config/\U\1/') # ARM #========================================================================
-xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
-omap1610inn_config \ -omap1610inn_cs0boot_config \ -omap1610inn_cs3boot_config \ -omap1610inn_cs_autoboot_config \ -omap1610h2_config \ -omap1610h2_cs0boot_config \ -omap1610h2_cs3boot_config \ -omap1610h2_cs_autoboot_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
- elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig diff --git a/boards.cfg b/boards.cfg index c1b0bad..b9cc705 100644 --- a/boards.cfg +++ b/boards.cfg @@ -162,6 +162,14 @@ magnesium arm arm926ejs imx27lite logicpd m28evk arm arm926ejs - denx mx28 nhk8815 arm arm926ejs nhk8815 st nomadik nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND +omap1610h2 arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610h2_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn:CS0_BOOT +omap1610h2_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610h2_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT +omap1610inn arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610inn_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn:CS0_BOOT +omap1610inn_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT +omap1610inn_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon -- 1.7.6.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang Denk,
In message 1323429272-26801-12-git-send-email-wd@denx.de you wrote:
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Kshitij Gupta kshitij@ti.com
MAKEALL | 2 -- Makefile | 20 -------------------- boards.cfg | 8 ++++++++ 3 files changed, 8 insertions(+), 22 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Fix: flash.c: In function 'flash_get_offsets': flash.c:122:10: warning: variable 'pOrgDef' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase': flash.c:263:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:439:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Dave Peverley dpeverley@mpc-data.co.uk --- board/ti/omap730p2/flash.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c index 185bc2d..a292627 100644 --- a/board/ti/omap730p2/flash.c +++ b/board/ti/omap730p2/flash.c @@ -119,9 +119,7 @@ unsigned long flash_init (void) static void flash_get_offsets (ulong base, flash_info_t * info) { int i; - OrgDef *pOrgDef;
- pOrgDef = OrgIntel_28F256L18T; if (info->flash_id == FLASH_UNKNOWN) { return; } @@ -335,6 +333,10 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf (" done\n"); } } + + if (flag) + enable_interrupts(); + return rcode; }
@@ -436,7 +438,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) { FPWV *addr = (FPWV *) dest; ulong status; - int flag; + int flag, rc = 0; ulong start;
/* Check if Flash is (sufficiently) erased */ @@ -456,12 +458,15 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); + rc = 1; + goto done; } } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); +done: + *addr = (FPW)0x00FF00FF; /* restore read mode */ + if (flag) + enable_interrupts(); + return rc; }
void inline spin_wheel (void)
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk wd@denx.de wrote:
Fix: flash.c: In function 'flash_get_offsets': flash.c:122:10: warning: variable 'pOrgDef' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase': flash.c:263:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:439:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Dave Peverley dpeverley@mpc-data.co.uk
Acked-by: Tom Rini trini@ti.com
board/ti/omap730p2/flash.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c index 185bc2d..a292627 100644 --- a/board/ti/omap730p2/flash.c +++ b/board/ti/omap730p2/flash.c @@ -119,9 +119,7 @@ unsigned long flash_init (void) static void flash_get_offsets (ulong base, flash_info_t * info) { int i;
OrgDef *pOrgDef;
pOrgDef = OrgIntel_28F256L18T;
if (info->flash_id == FLASH_UNKNOWN) { return; } @@ -335,6 +333,10 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf (" done\n"); } }
- if (flag)
- enable_interrupts();
return rcode; }
@@ -436,7 +438,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) { FPWV *addr = (FPWV *) dest; ulong status;
- int flag;
- int flag, rc = 0;
ulong start;
/* Check if Flash is (sufficiently) erased */ @@ -456,12 +458,15 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- rc = 1;
- goto done;
} }
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (0);
+done:
- *addr = (FPW)0x00FF00FF; /* restore read mode */
- if (flag)
- enable_interrupts();
- return rc;
}
void inline spin_wheel (void)
1.7.6.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang Denk,
In message 1323429272-26801-13-git-send-email-wd@denx.de you wrote:
Fix: flash.c: In function 'flash_get_offsets': flash.c:122:10: warning: variable 'pOrgDef' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase': flash.c:263:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:439:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de Cc: Dave Peverley dpeverley@mpc-data.co.uk
board/ti/omap730p2/flash.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signed-off-by: Wolfgang Denk wd@denx.de Dave Peverley dpeverley@mpc-data.co.uk --- MAKEALL | 1 - Makefile | 11 ----------- boards.cfg | 3 +++ 3 files changed, 3 insertions(+), 12 deletions(-)
diff --git a/MAKEALL b/MAKEALL index c2b52d0..f735af6 100755 --- a/MAKEALL +++ b/MAKEALL @@ -308,7 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)" LIST_ARM9="$(boards_by_cpu arm920t) \ $(boards_by_cpu arm926ejs) \ $(boards_by_cpu arm925t) \ - omap730p2 \ "
######################################################################### diff --git a/Makefile b/Makefile index 8474ce7..c37dc03 100644 --- a/Makefile +++ b/Makefile @@ -646,17 +646,6 @@ ucname = $(shell echo $(1) | sed -e 's/(.*)_config/\U\1/') # ARM #========================================================================
-omap730p2_config \ -omap730p2_cs0boot_config \ -omap730p2_cs3boot_config : unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _cs0boot_, $@)" ] ; then \ - echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ - else \ - echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - fi; - @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap - spear300_config \ spear310_config \ spear320_config : unconfig diff --git a/boards.cfg b/boards.cfg index b9cc705..9f25649 100644 --- a/boards.cfg +++ b/boards.cfg @@ -171,6 +171,9 @@ omap1610inn_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn: omap1610inn_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT omap1610inn_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT omap5912osk arm arm926ejs - ti omap +omap730p2 arm arm926ejs omap730p2 ti omap omap730p2:CS3_BOOT +omap730p2_cs0boot arm arm926ejs omap730p2 ti omap omap730p2:CS0_BOOT +omap730p2_cs3boot arm arm926ejs omap730p2 ti omap omap730p2:CS3_BOOT edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk wd@denx.de wrote:
Signed-off-by: Wolfgang Denk wd@denx.de Dave Peverley dpeverley@mpc-data.co.uk
Acked-by: Tom Rini trini@ti.com
MAKEALL | 1 - Makefile | 11 ----------- boards.cfg | 3 +++ 3 files changed, 3 insertions(+), 12 deletions(-)
diff --git a/MAKEALL b/MAKEALL index c2b52d0..f735af6 100755 --- a/MAKEALL +++ b/MAKEALL @@ -308,7 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)" LIST_ARM9="$(boards_by_cpu arm920t) \ $(boards_by_cpu arm926ejs) \ $(boards_by_cpu arm925t) \
- omap730p2 \
"
######################################################################### diff --git a/Makefile b/Makefile index 8474ce7..c37dc03 100644 --- a/Makefile +++ b/Makefile @@ -646,17 +646,6 @@ ucname = $(shell echo $(1) | sed -e 's/(.*)_config/\U\1/') # ARM #========================================================================
-omap730p2_config \ -omap730p2_cs0boot_config \ -omap730p2_cs3boot_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
spear300_config \ spear310_config \ spear320_config : unconfig diff --git a/boards.cfg b/boards.cfg index b9cc705..9f25649 100644 --- a/boards.cfg +++ b/boards.cfg @@ -171,6 +171,9 @@ omap1610inn_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn: omap1610inn_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT omap1610inn_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT omap5912osk arm arm926ejs - ti omap +omap730p2 arm arm926ejs omap730p2 ti omap omap730p2:CS3_BOOT +omap730p2_cs0boot arm arm926ejs omap730p2 ti omap omap730p2:CS0_BOOT +omap730p2_cs3boot arm arm926ejs omap730p2 ti omap omap730p2:CS3_BOOT edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB -- 1.7.6.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang Denk,
In message 1323429272-26801-14-git-send-email-wd@denx.de you wrote:
Signed-off-by: Wolfgang Denk wd@denx.de Dave Peverley dpeverley@mpc-data.co.uk
MAKEALL | 1 - Makefile | 11 ----------- boards.cfg | 3 +++ 3 files changed, 3 insertions(+), 12 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
participants (6)
-
Jason Hobbs -
Mike Frysinger -
Simon Guinot -
Tom Rini -
William Juul (wiljuul) -
Wolfgang Denk