This patch extracts the identical config options for the keymile boards mgcoge, mgsuvd and kmeter1 in a new common config file keymile-common.h.

Signed-off-by: Heiko Schocher hs@denx.de --- changes since v1:

- rebased against current HEAD commit e0b0ec843085f96f4fe0738424835ee90e58bc00

include/configs/keymile-common.h | 113 ++++++++++++++++++++++++++++++++++++++ include/configs/kmeter1.h | 82 +-------------------------- include/configs/mgcoge.h | 62 +-------------------- include/configs/mgsuvd.h | 82 +--------------------------- 4 files changed, 120 insertions(+), 219 deletions(-) create mode 100644 include/configs/keymile-common.h

diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h new file mode 100644 index 0000000..d70bc48 --- /dev/null +++ b/include/configs/keymile-common.h @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_KEYMILE_H +#define __CONFIG_KEYMILE_H + +/* Do boardspecific init for all boards */ +#define CONFIG_BOARD_EARLY_INIT_R 1 + +#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) +#define CONFIG_BOOTCOUNT_LIMIT +#endif + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +/* should go away, if kmeter I2C support is enabled */ +#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#endif + +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ + +#define CONFIG_BOOTCOMMAND "run net_nfs" +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +/* should go away, if kmeter I2C support is enabled */ +#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) +#define CONFIG_HUSH_INIT_VAR 1 +#endif + +#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * How to get access to the slot ID. Put this here to make it easy + * to modify in a centralized location. This is used in the HDLC + * driver to set the MAC. +*/ +#define CONFIG_CHECK_ETHERNET_PRESENT 1 +#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ +#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +#endif /* __CONFIG_KEYMILE_H */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index e443086..249ed22 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -29,6 +29,9 @@ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_KMETER1 1 /* KMETER1 board specific */

+/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" + /* * System Clock Setup */ @@ -60,8 +63,6 @@ #define CONFIG_SYS_SICRH 0x00000006 #define CONFIG_SYS_SICRL 0x00000000

-#define CONFIG_BOARD_EARLY_INIT_R - /* * IMMR new address */ @@ -135,13 +136,6 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000

/* - * Memory test - */ -#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 - -/* * The reserved memory */ #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ @@ -249,9 +243,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)

-#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,} - #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)

@@ -269,7 +260,6 @@ #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif - /* * QE UEC ethernet configuration */ @@ -310,38 +300,6 @@ #define CONFIG_ENV_SIZE 0x2000 #endif /* CFG_RAMBOOT */

-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * How to get access to the slot ID. Put this here to make it easy - * to modify in a centralized location. This is used in the HDLC - * driver to set the MAC. -*/ -#define CONFIG_CHECK_ETHERNET_PRESENT 1 -#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE -#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ -#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif @@ -351,28 +309,6 @@ #undef CONFIG_CMD_LOADS #endif

-#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -465,11 +401,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */

-#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - /* * Environment Configuration */ @@ -479,11 +410,6 @@ #define CONFIG_HAS_ETH0 #endif

-#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_82xx\0" \ @@ -526,6 +452,4 @@ "unlock=yes\0" \ ""

-#define CONFIG_BOOTCOMMAND "run net_nfs" - #endif /* __CONFIG_H */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index bfac3b0..233bee0 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -35,8 +35,8 @@

#define CONFIG_CPM2 1 /* Has a CPM2 */

-/* Do boardspecific init */ -#define CONFIG_BOARD_EARLY_INIT_R 1 +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h"

/* * Select serial console configuration @@ -74,23 +74,6 @@ #define CONFIG_8260_CLKIN 66000000 /* in Hz */ #endif

-#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTCOUNT_LIMIT - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DTT -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - /* * Default environment settings */ @@ -124,36 +107,6 @@ "run ramargs addip; " \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "" -#define CONFIG_BOOTCOMMAND "run net_nfs" -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_HUSH_INIT_VAR 1 -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0xFE000000 @@ -400,15 +353,4 @@ #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc/cpm/serial@11a90"

-/* - * How to get access to the slot ID. Put this here to make it easy - * to modify in a centralized location. This is used in the HDLC - * driver to set the MAC. -*/ -#define CONFIG_CHECK_ETHERNET_PRESENT 1 -#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE -#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ -#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ - - #endif /* __CONFIG_H */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 0bd2f40..f53b6d3 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -36,8 +36,8 @@ #define CONFIG_MPC866 1 /* This is a MPC866 CPU */ #define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */

-/* Do boardspecific init */ -#define CONFIG_BOARD_EARLY_INIT_R 1 +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h"

#define CONFIG_8xx_GCLK_FREQ 66000000

@@ -45,22 +45,13 @@ #define CONFIG_SYS_SMC_DPMEM_OFFSET 0x1fc0 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */

-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -#define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_SYS_CPM_BOOTCOUNT_ADDR 0x1eb0 /* In case of SMC relocation, the * default value is not working */

-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo"

-#undef CONFIG_BOOTARGS - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \ @@ -88,71 +79,12 @@ "cp.b 200000 f0000000 ${filesize};" \ "protect on f0000000 +${filesize}\0" \ "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE

#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */

#define CONFIG_TIMESTAMP /* but print image timestmps */

/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_HUSH_INIT_VAR 1 -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. @@ -211,16 +143,6 @@ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)

-/* - * How to get access to the slot ID. Put this here to make it easy - * to modify in a centralized location. This is used in the HDLC - * driver to set the MAC. -*/ -#define CONFIG_CHECK_ETHERNET_PRESENT 1 -#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE -#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ -#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ - /*----------------------------------------------------------------------- * Cache Configuration */