[U-Boot] [PATCH] serial: zynq: Remove unused #defines
From: Soren Brinkmann soren.brinkmann@xilinx.com
Signed-off-by: Soren Brinkmann soren.brinkmann@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com --- drivers/serial/serial_zynq.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 050b9c0..ff28f3c 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -21,10 +21,6 @@
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
-/* Some clock/baud constants */ -#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */ -#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */ - struct uart_zynq { u32 control; /* Control Register [8:0] */ u32 mode; /* Mode Register [10:0] */ -- 1.8.2.3
Hi Tom,
On 10/30/2013 03:49 PM, Michal Simek wrote:
From: Soren Brinkmann soren.brinkmann@xilinx.com
Signed-off-by: Soren Brinkmann soren.brinkmann@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
drivers/serial/serial_zynq.c | 4 ---- 1 file changed, 4 deletions(-)
Can you please add this patch to your tree?
If you like, I can send you pull request but this is just single patch which could go through directly.
Thanks, Michal
Hi Michal,
On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek michal.simek@xilinx.com wrote:
From: Soren Brinkmann soren.brinkmann@xilinx.com
Signed-off-by: Soren Brinkmann soren.brinkmann@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
drivers/serial/serial_zynq.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 050b9c0..ff28f3c 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -21,10 +21,6 @@
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
-/* Some clock/baud constants */ -#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */ -#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
struct uart_zynq { u32 control; /* Control Register [8:0] */ u32 mode; /* Mode Register [10:0] */ -- 1.8.2.3
Applied to u-boot-arm/master, thanks!
Amicalement,
On 12/10/2013 01:06 PM, Albert ARIBAUD wrote:
Hi Michal,
On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek michal.simek@xilinx.com wrote:
From: Soren Brinkmann soren.brinkmann@xilinx.com
Signed-off-by: Soren Brinkmann soren.brinkmann@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
drivers/serial/serial_zynq.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 050b9c0..ff28f3c 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -21,10 +21,6 @@
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
-/* Some clock/baud constants */ -#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */ -#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
struct uart_zynq { u32 control; /* Control Register [8:0] */ u32 mode; /* Mode Register [10:0] */ -- 1.8.2.3
Applied to u-boot-arm/master, thanks!
This has been already applied to Tom's tree.
Thanks, Michal
Hi Michal,
On Tue, 10 Dec 2013 13:11:47 +0100, Michal Simek monstr@monstr.eu wrote:
On 12/10/2013 01:06 PM, Albert ARIBAUD wrote:
Hi Michal,
On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek michal.simek@xilinx.com wrote:
From: Soren Brinkmann soren.brinkmann@xilinx.com
Signed-off-by: Soren Brinkmann soren.brinkmann@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
drivers/serial/serial_zynq.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 050b9c0..ff28f3c 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -21,10 +21,6 @@
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
-/* Some clock/baud constants */ -#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */ -#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
struct uart_zynq { u32 control; /* Control Register [8:0] */ u32 mode; /* Mode Register [10:0] */ -- 1.8.2.3
Applied to u-boot-arm/master, thanks!
This has been already applied to Tom's tree.
Well then, it was in my patchwork todo in error. :)
But never mind: it'll merge just fine, that's what git is for.
Thanks, Michal
Amicalement,
participants (3)
-
Albert ARIBAUD -
Michal Simek -
Michal Simek